projects / people / ms / u-boot.git / blame
| Commit | Line | Data |
|---|---|---|
| 6706b115 CC |
1 | This file contains information for VSC9953, a Vitesse L2 Switch IP |
| 2 | which is integrated in the T1040/T1020 Freescale SoCs. | |
| 3 | ||
| 4 | About Device: | |
| 5 | ============= | |
| 6 | VSC9953 is an 8-port Gigabit Ethernet switch supports the following features: | |
| 7 | - 8192 MAC addresses | |
| 8 | - Static Address provisioning | |
| 9 | - Dynamic learning of MAC addresses and aging | |
| 10 | - 4096 VLANs | |
| 11 | - Independent and shared VLAN learning (IVL, SVL) | |
| 12 | - Policing with storm control and MC/BC protection | |
| 13 | - IPv4 and IPv6 multicast | |
| 14 | - Jumbo frames (9.6 KB) | |
| 15 | - Access Control List | |
| 16 | - VLAN editing, translation and remarking | |
| 17 | - RMON counters per port | |
| 18 | ||
| 19 | Switch interfaces: | |
| 20 | - 8 Gigabit switch ports (ports 0 to 7) are external and are connected to external PHYs | |
| 21 | - 2 switch ports (ports 8 and 9) of 2.5 G are connected (fixed links) | |
| 22 | to FMan ports (FM1@DTSEC1 and FM1@DTSEC2) | |
| 23 | ||
| 24 | Commands Overview: | |
| 25 | ============= | |
| 26 | Commands supported | |
| 27 | - enable/disable a port | |
| 28 | - check a port's link speed, duplexity and status. | |
| 29 | ||
| 30 | Commands syntax | |
| 31 | ethsw port <port_nr> enable|disable - enable/disable an l2 switch port | |
| 32 | ethsw port <port_nr> show - show an l2 switch port's configuration | |
| 33 | ||
| 34 | port_nr=0..9; use "all" for all ports | |
| 35 | ||
| 36 | => ethsw port all show | |
| 37 | Port Status Link Speed Duplex | |
| 38 | 0 enabled down 10 half | |
| 39 | 1 enabled down 10 half | |
| 40 | 2 enabled down 10 half | |
| 41 | 3 enabled up 1000 full | |
| 42 | 4 disabled down - half | |
| 43 | 5 disabled down - half | |
| 44 | 6 disabled down - half | |
| 45 | 7 disabled down - half | |
| 46 | 8 enabled up 2500 full | |
| 47 | 9 enabled up 2500 full | |
| 48 | => |