[people/ms/u-boot.git] / drivers / gpio / Kconfig

#
# GPIO infrastructure and drivers
#

menu "GPIO Support"

config DM_GPIO
	bool "Enable Driver Model for GPIO drivers"
	depends on DM
	help
	  Enable driver model for GPIO access. The standard GPIO
	  interface (gpio_get_value(), etc.) is then implemented by
	  the GPIO uclass. Drivers provide methods to query the
	  particular GPIOs that they provide. The uclass interface
	  is defined in include/asm-generic/gpio.h.

config ALTERA_PIO
	bool "Altera PIO driver"
	depends on DM_GPIO
	help
	  Select this to enable PIO for Altera devices. Please find
	  details on the "Embedded Peripherals IP User Guide" of Altera.

config BCM6345_GPIO
	bool "BCM6345 GPIO driver"
	depends on DM_GPIO && ARCH_BMIPS
	help
	  This driver supports the GPIO banks on BCM6345 SoCs.

config DWAPB_GPIO
	bool "DWAPB GPIO driver"
	depends on DM && DM_GPIO
	default n
	help
	  Support for the Designware APB GPIO driver.

config AT91_GPIO
	bool "AT91 PIO GPIO driver"
	depends on DM_GPIO
	default n
	help
	  Say yes here to select AT91 PIO GPIO driver. AT91 PIO
	  controller manages up to 32 fully programmable input/output
	  lines. Each I/O line may be dedicated as a general-purpose
	  I/O or be assigned to a function of an embedded peripheral.
	  The assignment to a function of an embedded peripheral is
	  the responsibility of AT91 Pinctrl driver. This driver is
	  responsible for the general-purpose I/O.

config ATMEL_PIO4
	bool "ATMEL PIO4 driver"
	depends on DM_GPIO
	default n
	help
	  Say yes here to support the Atmel PIO4 driver.
	  The PIO4 is new version of Atmel PIO controller, which manages
	  up to 128 fully programmable input/output lines. Each I/O line
	  may be dedicated as a general purpose I/O or be assigned to
	  a function of an embedded peripheral.

config INTEL_BROADWELL_GPIO
	bool "Intel Broadwell GPIO driver"
	depends on DM
	help
	  This driver supports Broadwell U devices which have an expanded
	  GPIO feature set. The difference is large enough to merit a separate
	  driver from the common Intel ICH6 driver. It supports a total of
	  95 GPIOs which can be configured from the device tree.

config INTEL_ICH6_GPIO
	bool "Intel ICH6 compatible legacy GPIO driver"
	depends on DM_GPIO
	help
	  Say yes here to select Intel ICH6 compatible legacy GPIO driver.

config IMX_RGPIO2P
	bool "i.MX7ULP RGPIO2P driver"
	depends on DM
	default n
	help
	  This driver supports i.MX7ULP Rapid GPIO2P controller.

config HSDK_CREG_GPIO
	bool "HSDK CREG GPIO griver"
	depends on DM_GPIO
	default n
	help
	  This driver supports CREG GPIOs on Synopsys HSDK SOC.

config LPC32XX_GPIO
	bool "LPC32XX GPIO driver"
	depends on DM
	default n
	help
	  Support for the LPC32XX GPIO driver.

config MSM_GPIO
	bool "Qualcomm GPIO driver"
	depends on DM_GPIO
	default n
	help
	  Support GPIO controllers on Qualcomm Snapdragon family of SoCs.
	  This controller have single bank (default name "soc"), every
	  gpio has it's own set of registers.
	  Only simple GPIO operations are supported (get/set, change of
	  direction and checking pin function).
	  Supported devices:
	  - APQ8016
	  - MSM8916

config OMAP_GPIO
	bool "TI OMAP GPIO driver"
	depends on ARCH_OMAP2PLUS
	default y
	help
	  Support GPIO controllers on the TI OMAP3/4/5 and related (such as
	  AM335x/AM43xx/AM57xx/DRA7xx/etc) families of SoCs.

config CMD_PCA953X
	bool "Enable the pca953x command"
	help
	  Deprecated: This should be converted to driver model.

	  This command provides access to a pca953x GPIO device using the
	  legacy GPIO interface. Several subcommands are provided which mirror
	  the standard 'gpio' command. It should use that instead.

config PM8916_GPIO
	bool "Qualcomm PM8916 PMIC GPIO/keypad driver"
	depends on DM_GPIO && PMIC_PM8916
	help
	  Support for GPIO pins and power/reset buttons found on
	  Qualcomm PM8916 PMIC.
	  Default name for GPIO bank is "pm8916".
	  Power and reset buttons are placed in "pm8916_key" bank and
          have gpio numbers 0 and 1 respectively.

config PCF8575_GPIO
	bool "PCF8575 I2C GPIO Expander driver"
	depends on DM_GPIO && DM_I2C
	help
	 Support for PCF8575 I2C 16-bit GPIO expander. Most of these
	 chips are from NXP and TI.

config RCAR_GPIO
	bool "Renesas RCar GPIO driver"
	depends on DM_GPIO && ARCH_RMOBILE
	help
	  This driver supports the GPIO banks on Renesas RCar SoCs.

config ROCKCHIP_GPIO
	bool "Rockchip GPIO driver"
	depends on DM_GPIO
	help
	  Support GPIO access on Rockchip SoCs. The GPIOs are arranged into
	  a number of banks (different for each SoC type) each with 32 GPIOs.
	  The GPIOs for a device are defined in the device tree with one node
	  for each bank.

config SANDBOX_GPIO
	bool "Enable sandbox GPIO driver"
	depends on SANDBOX && DM && DM_GPIO
	help
	  This driver supports some simulated GPIOs which can be adjusted
	  using 'back door' functions like sandbox_gpio_set_value(). Then the
	  GPIOs can be inspected through the normal get_get_value()
	  interface. The purpose of this is to allow GPIOs to be used as
	  normal in sandbox, perhaps with test code actually driving the
	  behaviour of those GPIOs.

config SANDBOX_GPIO_COUNT
	int "Number of sandbox GPIOs"
	depends on SANDBOX_GPIO
	default 128
	help
	  The sandbox driver can support any number of GPIOs. Generally these
	  are specified using the device tree. But you can also have a number
	  of 'anonymous' GPIOs that do not belong to any device or bank.
	  Select a suitable value depending on your needs.

config CMD_TCA642X
	bool "tca642x - Command to access tca642x state"
	help
	  DEPRECATED - This needs conversion to driver model

	  This provides a way to looking at the pin state of this device.
	  This mirrors the 'gpio' command and that should be used in preference
	  to custom code.

config TEGRA_GPIO
	bool "Tegra20..210 GPIO driver"
	depends on DM_GPIO
	help
	  Support for the GPIO controller contained in NVIDIA Tegra20 through
	  Tegra210.

config TEGRA186_GPIO
	bool "Tegra186 GPIO driver"
	depends on DM_GPIO
	help
	  Support for the GPIO controller contained in NVIDIA Tegra186. This
	  covers both the "main" and "AON" controller instances, even though
	  they have slightly different register layout.

config GPIO_UNIPHIER
	bool "UniPhier GPIO"
	depends on ARCH_UNIPHIER
	help
	  Say yes here to support UniPhier GPIOs.

config VYBRID_GPIO
	bool "Vybrid GPIO driver"
	depends on DM
	default n
	help
	  Say yes here to support Vybrid vf610 GPIOs.

config PIC32_GPIO
	bool "Microchip PIC32 GPIO driver"
	depends on DM_GPIO && MACH_PIC32
	default y
	help
	  Say yes here to support Microchip PIC32 GPIOs.

config STM32F7_GPIO
	bool "ST STM32 GPIO driver"
	depends on DM_GPIO && STM32
	default y
	help
	  Device model driver support for STM32 GPIO controller. It should be
	  usable on many stm32 families like stm32f4 & stm32H7.
	  Tested on STM32F7.

config MVEBU_GPIO
	bool "Marvell MVEBU GPIO driver"
	depends on DM_GPIO && ARCH_MVEBU
	default y
	help
	  Say yes here to support Marvell MVEBU (Armada XP/38x) GPIOs.

config ZYNQ_GPIO
	bool "Zynq GPIO driver"
	depends on DM_GPIO && (ARCH_ZYNQ || ARCH_ZYNQMP)
	default y
	help
	  Supports GPIO access on Zynq SoC.

config DM_74X164
	bool "74x164 serial-in/parallel-out 8-bits shift register"
	depends on DM_GPIO
	help
	  Driver for 74x164 compatible serial-in/parallel-out 8-outputs
	  shift registers, such as 74lv165, 74hc595.
	  This driver can be used to provide access to more gpio outputs.

config DM_PCA953X
	bool "PCA95[357]x, PCA9698, TCA64xx, and MAX7310 I/O ports"
	depends on DM_GPIO
	help
	  Say yes here to provide access to several register-oriented
	  SMBus I/O expanders, made mostly by NXP or TI.  Compatible
	  models include:

	  4 bits:	pca9536, pca9537

	  8 bits:	max7310, max7315, pca6107, pca9534, pca9538, pca9554,
			pca9556, pca9557, pca9574, tca6408, xra1202

	  16 bits:	max7312, max7313, pca9535, pca9539, pca9555, pca9575,
			tca6416

	  24 bits:	tca6424

	  40 bits:	pca9505, pca9698

	  Now, max 24 bits chips and PCA953X compatible chips are
	  supported

config MPC85XX_GPIO
	bool "Freescale MPC85XX GPIO driver"
	depends on DM_GPIO
	help
	  This driver supports the built-in GPIO controller of MPC85XX CPUs.
	  Each GPIO bank is identified by its own entry in the device tree,
	  i.e.

	  gpio-controller@fc00 {
		#gpio-cells = <2>;
		compatible = "fsl,pq3-gpio";
		reg = <0xfc00 0x100>
	  }

	  By default, each bank is assumed to have 32 GPIOs, but the ngpios
	  setting is honored, so the number of GPIOs for each bank is
	  configurable to match the actual GPIO count of the SoC (e.g. the
	  32/32/23 banks of the P1022 SoC).

	  Aside from the standard functions of input/output mode, and output
	  value setting, the open-drain feature, which can configure individual
	  GPIOs to work as open-drain outputs, is supported.

	  The driver has been tested on MPC85XX, but it is likely that other
	  PowerQUICC III devices will work as well.
endmenu
Commit	Line	Data
0b11dbf7 MY	1	#
	2	# GPIO infrastructure and drivers
	3	#
	4
	5	menu "GPIO Support"
	6
da333ae7 MY	7	config DM_GPIO
	8	bool "Enable Driver Model for GPIO drivers"
	9	depends on DM
	10	help
f94a1bed SG	11	Enable driver model for GPIO access. The standard GPIO
	12	interface (gpio_get_value(), etc.) is then implemented by
	13	the GPIO uclass. Drivers provide methods to query the
	14	particular GPIOs that they provide. The uclass interface
	15	is defined in include/asm-generic/gpio.h.
606f7047	16
88d5ecf4 TC	17	config ALTERA_PIO
	18	bool "Altera PIO driver"
	19	depends on DM_GPIO
	20	help
	21	Select this to enable PIO for Altera devices. Please find
	22	details on the "Embedded Peripherals IP User Guide" of Altera.
	23
e64bdb2f ÁFR	24	config BCM6345_GPIO
	25	bool "BCM6345 GPIO driver"
	26	depends on DM_GPIO && ARCH_BMIPS
	27	help
	28	This driver supports the GPIO banks on BCM6345 SoCs.
	29
e30a70c2 MV	30	config DWAPB_GPIO
	31	bool "DWAPB GPIO driver"
	32	depends on DM && DM_GPIO
	33	default n
	34	help
	35	Support for the Designware APB GPIO driver.
	36
5a07a5f9 WY	37	config AT91_GPIO
	38	bool "AT91 PIO GPIO driver"
	39	depends on DM_GPIO
	40	default n
	41	help
	42	Say yes here to select AT91 PIO GPIO driver. AT91 PIO
	43	controller manages up to 32 fully programmable input/output
	44	lines. Each I/O line may be dedicated as a general-purpose
	45	I/O or be assigned to a function of an embedded peripheral.
	46	The assignment to a function of an embedded peripheral is
	47	the responsibility of AT91 Pinctrl driver. This driver is
	48	responsible for the general-purpose I/O.
	49
2c62c56a WY	50	config ATMEL_PIO4
2c62c56a WY	51	bool "ATMEL PIO4 driver"
ee3311db	52	depends on DM_GPIO
2c62c56a WY	53	default n
	54	help
	55	Say yes here to support the Atmel PIO4 driver.
	56	The PIO4 is new version of Atmel PIO controller, which manages
	57	up to 128 fully programmable input/output lines. Each I/O line
	58	may be dedicated as a general purpose I/O or be assigned to
	59	a function of an embedded peripheral.
	60
64b17977 SG	61	config INTEL_BROADWELL_GPIO
	62	bool "Intel Broadwell GPIO driver"
	63	depends on DM
	64	help
	65	This driver supports Broadwell U devices which have an expanded
	66	GPIO feature set. The difference is large enough to merit a separate
	67	driver from the common Intel ICH6 driver. It supports a total of
	68	95 GPIOs which can be configured from the device tree.
	69
72436892 BM	70	config INTEL_ICH6_GPIO
	71	bool "Intel ICH6 compatible legacy GPIO driver"
	72	depends on DM_GPIO
	73	help
	74	Say yes here to select Intel ICH6 compatible legacy GPIO driver.
	75
d665eb61 PF	76	config IMX_RGPIO2P
	77	bool "i.MX7ULP RGPIO2P driver"
	78	depends on DM
	79	default n
	80	help
	81	This driver supports i.MX7ULP Rapid GPIO2P controller.
	82
3194c3cd EP	83	config HSDK_CREG_GPIO
3194c3cd EP	84	bool "HSDK CREG GPIO griver"
d5fbcd57	85	depends on DM_GPIO
3194c3cd EP	86	default n
	87	help
	88	This driver supports CREG GPIOs on Synopsys HSDK SOC.
	89
606f7047 AA	90	config LPC32XX_GPIO
	91	bool "LPC32XX GPIO driver"
	92	depends on DM
	93	default n
	94	help
	95	Support for the LPC32XX GPIO driver.
d79c50af	96
81a87e18 MK	97	config MSM_GPIO
	98	bool "Qualcomm GPIO driver"
	99	depends on DM_GPIO
	100	default n
	101	help
	102	Support GPIO controllers on Qualcomm Snapdragon family of SoCs.
	103	This controller have single bank (default name "soc"), every
	104	gpio has it's own set of registers.
	105	Only simple GPIO operations are supported (get/set, change of
	106	direction and checking pin function).
	107	Supported devices:
	108	- APQ8016
	109	- MSM8916
	110
29cb2b3b TR	111	config OMAP_GPIO
	112	bool "TI OMAP GPIO driver"
	113	depends on ARCH_OMAP2PLUS
	114	default y
	115	help
	116	Support GPIO controllers on the TI OMAP3/4/5 and related (such as
	117	AM335x/AM43xx/AM57xx/DRA7xx/etc) families of SoCs.
	118
0091362c SG	119	config CMD_PCA953X
	120	bool "Enable the pca953x command"
	121	help
	122	Deprecated: This should be converted to driver model.
	123
	124	This command provides access to a pca953x GPIO device using the
	125	legacy GPIO interface. Several subcommands are provided which mirror
	126	the standard 'gpio' command. It should use that instead.
	127
120800df MK	128	config PM8916_GPIO
	129	bool "Qualcomm PM8916 PMIC GPIO/keypad driver"
	130	depends on DM_GPIO && PMIC_PM8916
	131	help
	132	Support for GPIO pins and power/reset buttons found on
	133	Qualcomm PM8916 PMIC.
	134	Default name for GPIO bank is "pm8916".
	135	Power and reset buttons are placed in "pm8916_key" bank and
	136	have gpio numbers 0 and 1 respectively.
	137
5746b0df V	138	config PCF8575_GPIO
	139	bool "PCF8575 I2C GPIO Expander driver"
	140	depends on DM_GPIO && DM_I2C
	141	help
	142	Support for PCF8575 I2C 16-bit GPIO expander. Most of these
	143	chips are from NXP and TI.
	144
f5f69594 MV	145	config RCAR_GPIO
	146	bool "Renesas RCar GPIO driver"
	147	depends on DM_GPIO && ARCH_RMOBILE
	148	help
	149	This driver supports the GPIO banks on Renesas RCar SoCs.
	150
1f8f7730 SG	151	config ROCKCHIP_GPIO
	152	bool "Rockchip GPIO driver"
	153	depends on DM_GPIO
	154	help
	155	Support GPIO access on Rockchip SoCs. The GPIOs are arranged into
	156	a number of banks (different for each SoC type) each with 32 GPIOs.
	157	The GPIOs for a device are defined in the device tree with one node
	158	for each bank.
	159
d79c50af SG	160	config SANDBOX_GPIO
	161	bool "Enable sandbox GPIO driver"
	162	depends on SANDBOX && DM && DM_GPIO
	163	help
	164	This driver supports some simulated GPIOs which can be adjusted
	165	using 'back door' functions like sandbox_gpio_set_value(). Then the
	166	GPIOs can be inspected through the normal get_get_value()
	167	interface. The purpose of this is to allow GPIOs to be used as
	168	normal in sandbox, perhaps with test code actually driving the
	169	behaviour of those GPIOs.
	170
	171	config SANDBOX_GPIO_COUNT
	172	int "Number of sandbox GPIOs"
	173	depends on SANDBOX_GPIO
	174	default 128
	175	help
	176	The sandbox driver can support any number of GPIOs. Generally these
	177	are specified using the device tree. But you can also have a number
	178	of 'anonymous' GPIOs that do not belong to any device or bank.
	179	Select a suitable value depending on your needs.
d348a943	180
90d99e59 SG	181	config CMD_TCA642X
	182	bool "tca642x - Command to access tca642x state"
	183	help
	184	DEPRECATED - This needs conversion to driver model
	185
	186	This provides a way to looking at the pin state of this device.
	187	This mirrors the 'gpio' command and that should be used in preference
	188	to custom code.
	189
601800be SW	190	config TEGRA_GPIO
	191	bool "Tegra20..210 GPIO driver"
	192	depends on DM_GPIO
	193	help
	194	Support for the GPIO controller contained in NVIDIA Tegra20 through
	195	Tegra210.
	196
074a1fdd SW	197	config TEGRA186_GPIO
	198	bool "Tegra186 GPIO driver"
	199	depends on DM_GPIO
	200	help
	201	Support for the GPIO controller contained in NVIDIA Tegra186. This
	202	covers both the "main" and "AON" controller instances, even though
	203	they have slightly different register layout.
	204
b9a66b63 MY	205	config GPIO_UNIPHIER
	206	bool "UniPhier GPIO"
	207	depends on ARCH_UNIPHIER
	208	help
	209	Say yes here to support UniPhier GPIOs.
	210
d348a943 BD	211	config VYBRID_GPIO
	212	bool "Vybrid GPIO driver"
	213	depends on DM
	214	default n
	215	help
	216	Say yes here to support Vybrid vf610 GPIOs.
0b11dbf7	217
386d934e PCM	218	config PIC32_GPIO
	219	bool "Microchip PIC32 GPIO driver"
	220	depends on DM_GPIO && MACH_PIC32
	221	default y
	222	help
	223	Say yes here to support Microchip PIC32 GPIOs.
	224
77417102 VM	225	config STM32F7_GPIO
	226	bool "ST STM32 GPIO driver"
	227	depends on DM_GPIO && STM32
	228	default y
	229	help
	230	Device model driver support for STM32 GPIO controller. It should be
	231	usable on many stm32 families like stm32f4 & stm32H7.
	232	Tested on STM32F7.
	233
704d9a64 SR	234	config MVEBU_GPIO
	235	bool "Marvell MVEBU GPIO driver"
	236	depends on DM_GPIO && ARCH_MVEBU
	237	default y
	238	help
	239	Say yes here to support Marvell MVEBU (Armada XP/38x) GPIOs.
	240
2978ae23 SDPP	241	config ZYNQ_GPIO
2978ae23 SDPP	242	bool "Zynq GPIO driver"
251ab06d	243	depends on DM_GPIO && (ARCH_ZYNQ \|\| ARCH_ZYNQMP)
2978ae23 SDPP	244	default y
	245	help
	246	Supports GPIO access on Zynq SoC.
	247
9300f711 PF	248	config DM_74X164
	249	bool "74x164 serial-in/parallel-out 8-bits shift register"
	250	depends on DM_GPIO
	251	help
	252	Driver for 74x164 compatible serial-in/parallel-out 8-outputs
	253	shift registers, such as 74lv165, 74hc595.
	254	This driver can be used to provide access to more gpio outputs.
	255
03773439 PF	256	config DM_PCA953X
	257	bool "PCA95[357]x, PCA9698, TCA64xx, and MAX7310 I/O ports"
	258	depends on DM_GPIO
	259	help
	260	Say yes here to provide access to several register-oriented
	261	SMBus I/O expanders, made mostly by NXP or TI. Compatible
	262	models include:
	263
	264	4 bits: pca9536, pca9537
	265
	266	8 bits: max7310, max7315, pca6107, pca9534, pca9538, pca9554,
	267	pca9556, pca9557, pca9574, tca6408, xra1202
	268
	269	16 bits: max7312, max7313, pca9535, pca9539, pca9555, pca9575,
	270	tca6416
	271
	272	24 bits: tca6424
	273
	274	40 bits: pca9505, pca9698
	275
	276	Now, max 24 bits chips and PCA953X compatible chips are
	277	supported
07d31f8f	278
	279	config MPC85XX_GPIO
	280	bool "Freescale MPC85XX GPIO driver"
	281	depends on DM_GPIO
	282	help
	283	This driver supports the built-in GPIO controller of MPC85XX CPUs.
	284	Each GPIO bank is identified by its own entry in the device tree,
	285	i.e.
	286
	287	gpio-controller@fc00 {
	288	#gpio-cells = <2>;
	289	compatible = "fsl,pq3-gpio";
	290	reg = <0xfc00 0x100>
	291	}
	292
	293	By default, each bank is assumed to have 32 GPIOs, but the ngpios
	294	setting is honored, so the number of GPIOs for each bank is
	295	configurable to match the actual GPIO count of the SoC (e.g. the
	296	32/32/23 banks of the P1022 SoC).
	297
51781783	298	Aside from the standard functions of input/output mode, and output
	299	value setting, the open-drain feature, which can configure individual
	300	GPIOs to work as open-drain outputs, is supported.
07d31f8f	301
	302	The driver has been tested on MPC85XX, but it is likely that other
	303	PowerQUICC III devices will work as well.
0b11dbf7	304	endmenu