[people/ms/u-boot.git] / drivers / mmc / Kconfig

menu "MMC Host controller Support"

config MMC
	bool "MMC/SD/SDIO card support"
	default ARM || PPC || SANDBOX
	help
	  This selects MultiMediaCard, Secure Digital and Secure
	  Digital I/O support.

	  If you want MMC/SD/SDIO support, you should say Y here and
	  also to your specific host controller driver.

config GENERIC_MMC
	bool "Generic MMC driver framework"
	default MMC

config DM_MMC
	bool "Enable MMC controllers using Driver Model"
	depends on DM
	help
	  This enables the MultiMediaCard (MMC) uclass which supports MMC and
	  Secure Digital I/O (SDIO) cards. Both removable (SD, micro-SD, etc.)
	  and non-removable (e.g. eMMC chip) devices are supported. These
	  appear as block devices in U-Boot and can support filesystems such
	  as EXT4 and FAT.

config DM_MMC_OPS
	bool "Support MMC controller operations using Driver Model"
	depends on DM_MMC
	default y if DM_MMC
	help
	  Driver model provides a means of supporting device operations. This
	  option moves MMC operations under the control of driver model. The
	  option will be removed as soon as all DM_MMC drivers use it, as it
	  will the only supported behaviour.

if MMC

config SPL_MMC_TINY
	bool "Tiny MMC framework in SPL"
	help
	  Enable MMC framework tinification support. This option is useful if
	  if your SPL is extremely size constrained. Heed the warning, enable
	  this option if and only if you know exactly what you are doing, if
	  you are reading this help text, you most likely have no idea :-)

	  The MMC framework is reduced to bare minimum to be useful. No malloc
	  support is needed for the MMC framework operation with this option
	  enabled. The framework supports exactly one MMC device and exactly
	  one MMC driver. The MMC driver can be adjusted to avoid any malloc
	  operations too, which can remove the need for malloc support in SPL
	  and thus further reduce footprint.

config ATMEL_SDHCI
	bool "Atmel SDHCI controller support"
	depends on DM_MMC && BLK && DM_MMC_OPS && ARCH_AT91
	depends on MMC_SDHCI
	help
	  This enables support for the Atmel SDHCI controller, which supports
	  the embedded MultiMedia Card (e.MMC) Specification V4.51, the SD
	  Memory Card Specification V3.0, and the SDIO V3.0 specification.
	  It is compliant with the SD Host Controller Standard V3.0
	  specification.

config MMC_DAVINCI
	bool "TI DAVINCI Multimedia Card Interface support"
	depends on ARCH_DAVINCI
	default y
	help
	  This selects the TI DAVINCI Multimedia card Interface.
	  If you have an DAVINCI board with a Multimedia Card slot,
	  say Y here.  If unsure, say N.

config MMC_DW
	bool "Synopsys DesignWare Memory Card Interface"
	help
	  This selects support for the Synopsys DesignWare Mobile Storage IP
	  block, this provides host support for SD and MMC interfaces, in both
	  PIO, internal DMA mode and external DMA mode.

config MMC_DW_EXYNOS
	bool "Exynos specific extensions for Synopsys DW Memory Card Interface"
	depends on ARCH_EXYNOS
	depends on MMC_DW
	default y
	help
	  This selects support for Samsung Exynos SoC specific extensions to the
	  Synopsys DesignWare Memory Card Interface driver. Select this option
	  for platforms based on Exynos4 and Exynos5 SoC's.

config MMC_DW_K3
	bool "K3 specific extensions for Synopsys DW Memory Card Interface"
	depends on MMC_DW
	help
	  This selects support for Hisilicon K3 SoC specific extensions to the
	  Synopsys DesignWare Memory Card Interface driver. Select this option
	  for platforms based on Hisilicon K3 SoC's.

config MMC_DW_ROCKCHIP
	bool "Rockchip SD/MMC controller support"
	depends on DM_MMC && OF_CONTROL
	depends on MMC_DW
	help
	  This enables support for the Rockchip SD/MMM controller, which is
	  based on Designware IP. The device is compatible with at least
	  SD 3.0, SDIO 3.0 and MMC 4.5 and supports common eMMC chips as well
	  as removeable SD and micro-SD cards.

config MMC_DW_SOCFPGA
	bool "SOCFPGA specific extensions for Synopsys DW Memory Card Interface"
	depends on ARCH_SOCFPGA
	depends on MMC_DW
	default y
	help
	  This selects support for Altera SOCFPGA specific extensions to the
	  Synopsys DesignWare Memory Card Interface driver. Select this option
	  for platforms based on Altera SOCFPGA.

config MMC_MXC
	bool "Freescale i.MX21/27/31 or MPC512x Multimedia Card support"
	help
	  This selects the Freescale i.MX21, i.MX27, i.MX31 or MPC512x
	  Multimedia Card Interface. If you have an i.MX or MPC512x platform
	  with a Multimedia Card slot, say Y here.

	  If unsure, say N.

config MMC_MXS
	bool "Freescale MXS Multimedia Card Interface support"
	help
	  This selects the Freescale SSP MMC controller found on MXS based
	  platforms like mx23/28.

	  If unsure, say N.

config MMC_OMAP_HS
	bool "TI OMAP High Speed Multimedia Card Interface support"
	help
	  This selects the TI OMAP High Speed Multimedia card Interface.
	  If you have an omap2plus board with a Multimedia Card slot,
	  say Y here.

	  If unsure, say N.

config SH_SDHI
	bool "SuperH/Renesas ARM SoCs on-chip SDHI host controller support"
	depends on RMOBILE
	help
	  Support for the on-chip SDHI host controller on SuperH/Renesas ARM SoCs platform

config PIC32_SDHCI
	bool "Microchip PIC32 on-chip SDHCI support"
	depends on DM_MMC && MACH_PIC32
	depends on MMC_SDHCI
	help
	  Support for Microchip PIC32 SDHCI controller.

config MMC_UNIPHIER
	bool "UniPhier SD/MMC Host Controller support"
	depends on ARCH_UNIPHIER
	depends on BLK && DM_MMC_OPS
	depends on OF_CONTROL
	help
	  This selects support for the SD/MMC Host Controller on UniPhier SoCs.

config MMC_SANDBOX
	bool "Sandbox MMC support"
	depends on SANDBOX
	depends on BLK && DM_MMC_OPS && OF_CONTROL
	help
	  This select a dummy sandbox MMC driver. At present this does nothing
	  other than allow sandbox to be build with MMC support. This
	  improves build coverage for sandbox and makes it easier to detect
	  MMC build errors with sandbox.

config MMC_SDHCI
	bool "Secure Digital Host Controller Interface support"
	help
	  This selects the generic Secure Digital Host Controller Interface.
	  It is used by manufacturers such as Texas Instruments(R), Ricoh(R)
	  and Toshiba(R). Most controllers found in laptops are of this type.

	  If you have a controller with this interface, say Y here.

	  If unsure, say N.

config MMC_SDHCI_IO_ACCESSORS
	bool
	depends on MMC_SDHCI
	help
	  This is silent Kconfig symbol that is selected by the drivers that
	  need to overwrite SDHCI IO memory accessors.

config MMC_SDHCI_SDMA
	bool "Support SDHCI SDMA"
	depends on MMC_SDHCI
	help
	  This enables support for the SDMA (Single Operation DMA) defined
	  in the SD Host Controller Standard Specification Version 1.00 .

config MMC_SDHCI_BCM2835
	tristate "SDHCI support for the BCM2835 SD/MMC Controller"
	depends on ARCH_BCM283X
	depends on MMC_SDHCI
	select MMC_SDHCI_IO_ACCESSORS
	help
	  This selects the BCM2835 SD/MMC controller.

	  If you have a BCM2835 platform with SD or MMC devices,
	  say Y here.

	  If unsure, say N.

config MMC_SDHCI_CADENCE
	bool "SDHCI support for the Cadence SD/SDIO/eMMC controller"
	depends on BLK && DM_MMC_OPS
	depends on MMC_SDHCI
	depends on OF_CONTROL
	help
	  This selects the Cadence SD/SDIO/eMMC driver.

	  If you have a controller with this interface, say Y here.

	  If unsure, say N.

config MMC_SDHCI_KONA
	bool "SDHCI support on Broadcom KONA platform"
	depends on MMC_SDHCI
	help
	  This selects the Broadcom Kona Secure Digital Host Controller
	  Interface(SDHCI) support.
	  This is used in Broadcom mobile SoCs.

	  If you have a controller with this interface, say Y here.

config MMC_SDHCI_MSM
	bool "Qualcomm SDHCI controller"
	depends on BLK && DM_MMC_OPS
	depends on MMC_SDHCI
	help
	  Enables support for SDHCI 2.0 controller present on some Qualcomm
          Snapdragon devices. This device is compatible with eMMC v4.5 and
          SD 3.0 specifications. Both SD and eMMC devices are supported.
	  Card-detect gpios are not supported.

config MMC_SDHCI_MV
	bool "SDHCI support on Marvell platform"
	depends on ARCH_MVEBU
	depends on MMC_SDHCI
	help
	  This selects the Secure Digital Host Controller Interface on
	  Marvell platform.

	  If you have a controller with this interface, say Y here.

	  If unsure, say N.

config MMC_SDHCI_ROCKCHIP
	bool "Arasan SDHCI controller for Rockchip support"
	depends on ARCH_ROCKCHIP
	depends on DM_MMC && BLK && DM_MMC_OPS
	depends on MMC_SDHCI
	help
	  Support for Arasan SDHCI host controller on Rockchip ARM SoCs platform

config MMC_SDHCI_S5P
	bool "SDHCI support on Samsung S5P SoC"
	depends on MMC_SDHCI
	help
	  This selects the Secure Digital Host Controller Interface (SDHCI)
	  on Samsung S5P SoCs.

	  If you have a controller with this interface, say Y here.

	  If unsure, say N.

config MMC_SDHCI_SPEAR
	bool "SDHCI support on ST SPEAr platform"
	depends on MMC_SDHCI
	help
	  This selects the Secure Digital Host Controller Interface (SDHCI)
	  often referrered to as the HSMMC block in some of the ST SPEAR range
	  of SoC

	  If you have a controller with this interface, say Y here.

	  If unsure, say N.

config MMC_SDHCI_XENON
	bool "SDHCI support for the Xenon SDHCI controller"
	depends on MMC_SDHCI && DM_MMC && OF_CONTROL
	help
	  Support for Xenon SDHCI host controller on Marvell Armada 3700
	  7k/8k ARM SoCs platforms

	  If you have a controller with this interface, say Y here.

	  If unsure, say N.

config MMC_SDHCI_TEGRA
	bool "SDHCI platform support for the Tegra SD/MMC Controller"
	depends on TEGRA
	default y
	help
	  This selects the Tegra SD/MMC controller. If you have a Tegra
	  platform with SD or MMC devices, say Y here.

	  If unsure, say N.

config MMC_SDHCI_ZYNQ
	bool "Arasan SDHCI controller support"
	depends on ARCH_ZYNQ || ARCH_ZYNQMP
	depends on DM_MMC && OF_CONTROL && BLK && DM_MMC_OPS
	depends on MMC_SDHCI
	help
	  Support for Arasan SDHCI host controller on Zynq/ZynqMP ARM SoCs platform

config MMC_SUNXI
	bool "Allwinner sunxi SD/MMC Host Controller support"
	depends on ARCH_SUNXI && !UART0_PORT_F
	default y
	help
	  This selects support for the SD/MMC Host Controller on
	  Allwinner sunxi SoCs.

endif

endmenu

config SYS_FSL_ERRATUM_ESDHC111
	bool

config SYS_FSL_ERRATUM_ESDHC13
	bool

config SYS_FSL_ERRATUM_ESDHC135
	bool

config SYS_FSL_ERRATUM_ESDHC_A001
	bool
Commit	Line	Data
72d42bad NI	1	menu "MMC Host controller Support"
72d42bad NI	2
7a777f6d	3	config MMC
c2726995 MY	4	bool "MMC/SD/SDIO card support"
c2726995 MY	5	default ARM \|\| PPC \|\| SANDBOX
7a777f6d	6	help
c2726995 MY	7	This selects MultiMediaCard, Secure Digital and Secure
	8	Digital I/O support.
	9
	10	If you want MMC/SD/SDIO support, you should say Y here and
	11	also to your specific host controller driver.
7a777f6d	12
54925327 MY	13	config GENERIC_MMC
	14	bool "Generic MMC driver framework"
	15	default MMC
	16
e7ecf7cb SG	17	config DM_MMC
	18	bool "Enable MMC controllers using Driver Model"
	19	depends on DM
	20	help
62a3b7dd	21	This enables the MultiMediaCard (MMC) uclass which supports MMC and
e7ecf7cb SG	22	Secure Digital I/O (SDIO) cards. Both removable (SD, micro-SD, etc.)
	23	and non-removable (e.g. eMMC chip) devices are supported. These
	24	appear as block devices in U-Boot and can support filesystems such
	25	as EXT4 and FAT.
	26
8ca51e51 SG	27	config DM_MMC_OPS
	28	bool "Support MMC controller operations using Driver Model"
	29	depends on DM_MMC
252788b4	30	default y if DM_MMC
8ca51e51 SG	31	help
	32	Driver model provides a means of supporting device operations. This
	33	option moves MMC operations under the control of driver model. The
	34	option will be removed as soon as all DM_MMC drivers use it, as it
	35	will the only supported behaviour.
	36
e298c46a MY	37	if MMC
e298c46a MY	38
b5b838f1 MV	39	config SPL_MMC_TINY
	40	bool "Tiny MMC framework in SPL"
	41	help
	42	Enable MMC framework tinification support. This option is useful if
	43	if your SPL is extremely size constrained. Heed the warning, enable
	44	this option if and only if you know exactly what you are doing, if
	45	you are reading this help text, you most likely have no idea :-)
	46
	47	The MMC framework is reduced to bare minimum to be useful. No malloc
	48	support is needed for the MMC framework operation with this option
	49	enabled. The framework supports exactly one MMC device and exactly
	50	one MMC driver. The MMC driver can be adjusted to avoid any malloc
	51	operations too, which can remove the need for malloc support in SPL
	52	and thus further reduce footprint.
	53
a0d0d86f WY	54	config ATMEL_SDHCI
	55	bool "Atmel SDHCI controller support"
	56	depends on DM_MMC && BLK && DM_MMC_OPS && ARCH_AT91
e1ce61fb	57	depends on MMC_SDHCI
a0d0d86f WY	58	help
	59	This enables support for the Atmel SDHCI controller, which supports
	60	the embedded MultiMedia Card (e.MMC) Specification V4.51, the SD
	61	Memory Card Specification V3.0, and the SDIO V3.0 specification.
	62	It is compliant with the SD Host Controller Standard V3.0
	63	specification.
	64
1d2c0506 MY	65	config MMC_DAVINCI
	66	bool "TI DAVINCI Multimedia Card Interface support"
	67	depends on ARCH_DAVINCI
	68	default y
	69	help
	70	This selects the TI DAVINCI Multimedia card Interface.
	71	If you have an DAVINCI board with a Multimedia Card slot,
	72	say Y here. If unsure, say N.
	73
55ed3b46 MY	74	config MMC_DW
	75	bool "Synopsys DesignWare Memory Card Interface"
	76	help
	77	This selects support for the Synopsys DesignWare Mobile Storage IP
	78	block, this provides host support for SD and MMC interfaces, in both
	79	PIO, internal DMA mode and external DMA mode.
	80
ae4c81e9 MY	81	config MMC_DW_EXYNOS
	82	bool "Exynos specific extensions for Synopsys DW Memory Card Interface"
	83	depends on ARCH_EXYNOS
	84	depends on MMC_DW
	85	default y
	86	help
	87	This selects support for Samsung Exynos SoC specific extensions to the
	88	Synopsys DesignWare Memory Card Interface driver. Select this option
	89	for platforms based on Exynos4 and Exynos5 SoC's.
	90
	91	config MMC_DW_K3
	92	bool "K3 specific extensions for Synopsys DW Memory Card Interface"
	93	depends on MMC_DW
	94	help
	95	This selects support for Hisilicon K3 SoC specific extensions to the
	96	Synopsys DesignWare Memory Card Interface driver. Select this option
	97	for platforms based on Hisilicon K3 SoC's.
	98
fed44087	99	config MMC_DW_ROCKCHIP
a8cb4fb5 SG	100	bool "Rockchip SD/MMC controller support"
a8cb4fb5 SG	101	depends on DM_MMC && OF_CONTROL
55ed3b46	102	depends on MMC_DW
a8cb4fb5 SG	103	help
	104	This enables support for the Rockchip SD/MMM controller, which is
	105	based on Designware IP. The device is compatible with at least
	106	SD 3.0, SDIO 3.0 and MMC 4.5 and supports common eMMC chips as well
	107	as removeable SD and micro-SD cards.
	108
ae4c81e9 MY	109	config MMC_DW_SOCFPGA
	110	bool "SOCFPGA specific extensions for Synopsys DW Memory Card Interface"
	111	depends on ARCH_SOCFPGA
	112	depends on MMC_DW
	113	default y
	114	help
	115	This selects support for Altera SOCFPGA specific extensions to the
	116	Synopsys DesignWare Memory Card Interface driver. Select this option
	117	for platforms based on Altera SOCFPGA.
	118
1d2c0506 MY	119	config MMC_MXC
	120	bool "Freescale i.MX21/27/31 or MPC512x Multimedia Card support"
	121	help
	122	This selects the Freescale i.MX21, i.MX27, i.MX31 or MPC512x
	123	Multimedia Card Interface. If you have an i.MX or MPC512x platform
	124	with a Multimedia Card slot, say Y here.
	125
	126	If unsure, say N.
	127
	128	config MMC_MXS
	129	bool "Freescale MXS Multimedia Card Interface support"
	130	help
	131	This selects the Freescale SSP MMC controller found on MXS based
	132	platforms like mx23/28.
	133
	134	If unsure, say N.
	135
	136	config MMC_OMAP_HS
	137	bool "TI OMAP High Speed Multimedia Card Interface support"
	138	help
	139	This selects the TI OMAP High Speed Multimedia card Interface.
	140	If you have an omap2plus board with a Multimedia Card slot,
	141	say Y here.
	142
	143	If unsure, say N.
	144
72d42bad NI	145	config SH_SDHI
	146	bool "SuperH/Renesas ARM SoCs on-chip SDHI host controller support"
	147	depends on RMOBILE
	148	help
	149	Support for the on-chip SDHI host controller on SuperH/Renesas ARM SoCs platform
	150
102142c9 AP	151	config PIC32_SDHCI
	152	bool "Microchip PIC32 on-chip SDHCI support"
	153	depends on DM_MMC && MACH_PIC32
e1ce61fb	154	depends on MMC_SDHCI
102142c9 AP	155	help
	156	Support for Microchip PIC32 SDHCI controller.
	157
a111bfbf MY	158	config MMC_UNIPHIER
	159	bool "UniPhier SD/MMC Host Controller support"
	160	depends on ARCH_UNIPHIER
9c720c81 MY	161	depends on BLK && DM_MMC_OPS
9c720c81 MY	162	depends on OF_CONTROL
a111bfbf MY	163	help
	164	This selects support for the SD/MMC Host Controller on UniPhier SoCs.
	165
a5995a5d	166	config MMC_SANDBOX
f376a3cb	167	bool "Sandbox MMC support"
a5995a5d MY	168	depends on SANDBOX
a5995a5d MY	169	depends on BLK && DM_MMC_OPS && OF_CONTROL
f376a3cb SG	170	help
	171	This select a dummy sandbox MMC driver. At present this does nothing
	172	other than allow sandbox to be build with MMC support. This
	173	improves build coverage for sandbox and makes it easier to detect
	174	MMC build errors with sandbox.
	175
e1ce61fb MY	176	config MMC_SDHCI
	177	bool "Secure Digital Host Controller Interface support"
	178	help
	179	This selects the generic Secure Digital Host Controller Interface.
	180	It is used by manufacturers such as Texas Instruments(R), Ricoh(R)
	181	and Toshiba(R). Most controllers found in laptops are of this type.
	182
	183	If you have a controller with this interface, say Y here.
	184
	185	If unsure, say N.
	186
3d3a74cc MY	187	config MMC_SDHCI_IO_ACCESSORS
	188	bool
	189	depends on MMC_SDHCI
	190	help
	191	This is silent Kconfig symbol that is selected by the drivers that
	192	need to overwrite SDHCI IO memory accessors.
	193
45a68fe2 MY	194	config MMC_SDHCI_SDMA
	195	bool "Support SDHCI SDMA"
	196	depends on MMC_SDHCI
	197	help
	198	This enables support for the SDMA (Single Operation DMA) defined
	199	in the SD Host Controller Standard Specification Version 1.00 .
	200
	201	config MMC_SDHCI_BCM2835
	202	tristate "SDHCI support for the BCM2835 SD/MMC Controller"
	203	depends on ARCH_BCM283X
	204	depends on MMC_SDHCI
3d3a74cc	205	select MMC_SDHCI_IO_ACCESSORS
45a68fe2 MY	206	help
	207	This selects the BCM2835 SD/MMC controller.
	208
	209	If you have a BCM2835 platform with SD or MMC devices,
	210	say Y here.
	211
	212	If unsure, say N.
	213
e5e7a7c2 MY	214	config MMC_SDHCI_CADENCE
	215	bool "SDHCI support for the Cadence SD/SDIO/eMMC controller"
	216	depends on BLK && DM_MMC_OPS
	217	depends on MMC_SDHCI
	218	depends on OF_CONTROL
	219	help
	220	This selects the Cadence SD/SDIO/eMMC driver.
	221
	222	If you have a controller with this interface, say Y here.
	223
	224	If unsure, say N.
	225
45a68fe2 MY	226	config MMC_SDHCI_KONA
	227	bool "SDHCI support on Broadcom KONA platform"
	228	depends on MMC_SDHCI
	229	help
	230	This selects the Broadcom Kona Secure Digital Host Controller
	231	Interface(SDHCI) support.
	232	This is used in Broadcom mobile SoCs.
	233
	234	If you have a controller with this interface, say Y here.
	235
360c67d5 MY	236	config MMC_SDHCI_MSM
	237	bool "Qualcomm SDHCI controller"
	238	depends on BLK && DM_MMC_OPS
	239	depends on MMC_SDHCI
	240	help
	241	Enables support for SDHCI 2.0 controller present on some Qualcomm
	242	Snapdragon devices. This device is compatible with eMMC v4.5 and
	243	SD 3.0 specifications. Both SD and eMMC devices are supported.
	244	Card-detect gpios are not supported.
	245
45a68fe2 MY	246	config MMC_SDHCI_MV
	247	bool "SDHCI support on Marvell platform"
	248	depends on ARCH_MVEBU
	249	depends on MMC_SDHCI
	250	help
	251	This selects the Secure Digital Host Controller Interface on
	252	Marvell platform.
	253
	254	If you have a controller with this interface, say Y here.
	255
	256	If unsure, say N.
	257
facc8058 MY	258	config MMC_SDHCI_ROCKCHIP
	259	bool "Arasan SDHCI controller for Rockchip support"
	260	depends on ARCH_ROCKCHIP
	261	depends on DM_MMC && BLK && DM_MMC_OPS
	262	depends on MMC_SDHCI
	263	help
	264	Support for Arasan SDHCI host controller on Rockchip ARM SoCs platform
	265
45a68fe2 MY	266	config MMC_SDHCI_S5P
	267	bool "SDHCI support on Samsung S5P SoC"
	268	depends on MMC_SDHCI
	269	help
	270	This selects the Secure Digital Host Controller Interface (SDHCI)
	271	on Samsung S5P SoCs.
	272
	273	If you have a controller with this interface, say Y here.
	274
	275	If unsure, say N.
	276
	277	config MMC_SDHCI_SPEAR
	278	bool "SDHCI support on ST SPEAr platform"
	279	depends on MMC_SDHCI
	280	help
	281	This selects the Secure Digital Host Controller Interface (SDHCI)
	282	often referrered to as the HSMMC block in some of the ST SPEAR range
	283	of SoC
	284
	285	If you have a controller with this interface, say Y here.
	286
	287	If unsure, say N.
	288
b6acb5f1 SR	289	config MMC_SDHCI_XENON
	290	bool "SDHCI support for the Xenon SDHCI controller"
	291	depends on MMC_SDHCI && DM_MMC && OF_CONTROL
	292	help
	293	Support for Xenon SDHCI host controller on Marvell Armada 3700
	294	7k/8k ARM SoCs platforms
	295
	296	If you have a controller with this interface, say Y here.
	297
	298	If unsure, say N.
	299
1d2c0506 MY	300	config MMC_SDHCI_TEGRA
	301	bool "SDHCI platform support for the Tegra SD/MMC Controller"
	302	depends on TEGRA
	303	default y
	304	help
	305	This selects the Tegra SD/MMC controller. If you have a Tegra
	306	platform with SD or MMC devices, say Y here.
	307
	308	If unsure, say N.
	309
08aa0334 MY	310	config MMC_SDHCI_ZYNQ
	311	bool "Arasan SDHCI controller support"
	312	depends on ARCH_ZYNQ \|\| ARCH_ZYNQMP
	313	depends on DM_MMC && OF_CONTROL && BLK && DM_MMC_OPS
	314	depends on MMC_SDHCI
	315	help
	316	Support for Arasan SDHCI host controller on Zynq/ZynqMP ARM SoCs platform
	317
1d2c0506 MY	318	config MMC_SUNXI
1d2c0506 MY	319	bool "Allwinner sunxi SD/MMC Host Controller support"
0ad178c1	320	depends on ARCH_SUNXI && !UART0_PORT_F
1d2c0506 MY	321	default y
	322	help
	323	This selects support for the SD/MMC Host Controller on
	324	Allwinner sunxi SoCs.
	325
e298c46a MY	326	endif
e298c46a MY	327
72d42bad	328	endmenu
c01e4a1a YS	329
	330	config SYS_FSL_ERRATUM_ESDHC111
	331	bool
	332
	333	config SYS_FSL_ERRATUM_ESDHC13
	334	bool
	335
	336	config SYS_FSL_ERRATUM_ESDHC135
	337	bool
	338
	339	config SYS_FSL_ERRATUM_ESDHC_A001
	340	bool