[people/ms/u-boot.git] / drivers / serial / serial_bcm6345.c

/*
 * Copyright (C) 2017 Álvaro Fernández Rojas <noltari@gmail.com>
 *
 * Derived from linux/drivers/tty/serial/bcm63xx_uart.c:
 *	Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#include <clk.h>
#include <dm.h>
#include <debug_uart.h>
#include <errno.h>
#include <serial.h>
#include <asm/io.h>
#include <asm/types.h>

/* UART Control register */
#define UART_CTL_REG			0x0
#define UART_CTL_RXTIMEOUT_MASK		0x1f
#define UART_CTL_RXTIMEOUT_5		0x5
#define UART_CTL_RSTRXFIFO_SHIFT	6
#define UART_CTL_RSTRXFIFO_MASK		(1 << UART_CTL_RSTRXFIFO_SHIFT)
#define UART_CTL_RSTTXFIFO_SHIFT	7
#define UART_CTL_RSTTXFIFO_MASK		(1 << UART_CTL_RSTTXFIFO_SHIFT)
#define UART_CTL_STOPBITS_SHIFT		8
#define UART_CTL_STOPBITS_MASK		(0xf << UART_CTL_STOPBITS_SHIFT)
#define UART_CTL_STOPBITS_1		(0x7 << UART_CTL_STOPBITS_SHIFT)
#define UART_CTL_BITSPERSYM_SHIFT	12
#define UART_CTL_BITSPERSYM_MASK	(0x3 << UART_CTL_BITSPERSYM_SHIFT)
#define UART_CTL_BITSPERSYM_8		(0x3 << UART_CTL_BITSPERSYM_SHIFT)
#define UART_CTL_XMITBRK_SHIFT		14
#define UART_CTL_XMITBRK_MASK		(1 << UART_CTL_XMITBRK_SHIFT)
#define UART_CTL_RSVD_SHIFT		15
#define UART_CTL_RSVD_MASK		(1 << UART_CTL_RSVD_SHIFT)
#define UART_CTL_RXPAREVEN_SHIFT	16
#define UART_CTL_RXPAREVEN_MASK		(1 << UART_CTL_RXPAREVEN_SHIFT)
#define UART_CTL_RXPAREN_SHIFT		17
#define UART_CTL_RXPAREN_MASK		(1 << UART_CTL_RXPAREN_SHIFT)
#define UART_CTL_TXPAREVEN_SHIFT	18
#define UART_CTL_TXPAREVEN_MASK		(1 << UART_CTL_TXPAREVEN_SHIFT)
#define UART_CTL_TXPAREN_SHIFT		19
#define UART_CTL_TXPAREN_MASK		(1 << UART_CTL_TXPAREN_SHIFT)
#define UART_CTL_LOOPBACK_SHIFT		20
#define UART_CTL_LOOPBACK_MASK		(1 << UART_CTL_LOOPBACK_SHIFT)
#define UART_CTL_RXEN_SHIFT		21
#define UART_CTL_RXEN_MASK		(1 << UART_CTL_RXEN_SHIFT)
#define UART_CTL_TXEN_SHIFT		22
#define UART_CTL_TXEN_MASK		(1 << UART_CTL_TXEN_SHIFT)
#define UART_CTL_BRGEN_SHIFT		23
#define UART_CTL_BRGEN_MASK		(1 << UART_CTL_BRGEN_SHIFT)

/* UART Baudword register */
#define UART_BAUD_REG			0x4

/* UART FIFO Config register */
#define UART_FIFO_CFG_REG		0x8
#define UART_FIFO_CFG_RX_SHIFT		8
#define UART_FIFO_CFG_RX_MASK		(0xf << UART_FIFO_CFG_RX_SHIFT)
#define UART_FIFO_CFG_RX_4		(0x4 << UART_FIFO_CFG_RX_SHIFT)
#define UART_FIFO_CFG_TX_SHIFT		12
#define UART_FIFO_CFG_TX_MASK		(0xf << UART_FIFO_CFG_TX_SHIFT)
#define UART_FIFO_CFG_TX_4		(0x4 << UART_FIFO_CFG_TX_SHIFT)

/* UART Interrupt register */
#define UART_IR_REG			0x10
#define UART_IR_STAT(x)			(1 << (x))
#define UART_IR_TXEMPTY			5
#define UART_IR_RXOVER			7
#define UART_IR_RXNOTEMPTY		11

/* UART FIFO register */
#define UART_FIFO_REG			0x14
#define UART_FIFO_VALID_MASK		0xff
#define UART_FIFO_FRAMEERR_SHIFT	8
#define UART_FIFO_FRAMEERR_MASK		(1 << UART_FIFO_FRAMEERR_SHIFT)
#define UART_FIFO_PARERR_SHIFT		9
#define UART_FIFO_PARERR_MASK		(1 << UART_FIFO_PARERR_SHIFT)
#define UART_FIFO_BRKDET_SHIFT		10
#define UART_FIFO_BRKDET_MASK		(1 << UART_FIFO_BRKDET_SHIFT)
#define UART_FIFO_ANYERR_MASK		(UART_FIFO_FRAMEERR_MASK |	\
					UART_FIFO_PARERR_MASK |		\
					UART_FIFO_BRKDET_MASK)

struct bcm6345_serial_priv {
	void __iomem *base;
	ulong uartclk;
};

/* enable rx & tx operation on uart */
static void bcm6345_serial_enable(void __iomem *base)
{
	setbits_be32(base + UART_CTL_REG, UART_CTL_BRGEN_MASK |
		     UART_CTL_TXEN_MASK | UART_CTL_RXEN_MASK);
}

/* disable rx & tx operation on uart */
static void bcm6345_serial_disable(void __iomem *base)
{
	clrbits_be32(base + UART_CTL_REG, UART_CTL_BRGEN_MASK |
		     UART_CTL_TXEN_MASK | UART_CTL_RXEN_MASK);
}

/* clear all unread data in rx fifo and unsent data in tx fifo */
static void bcm6345_serial_flush(void __iomem *base)
{
	/* empty rx and tx fifo */
	setbits_be32(base + UART_CTL_REG, UART_CTL_RSTRXFIFO_MASK |
		     UART_CTL_RSTTXFIFO_MASK);

	/* read any pending char to make sure all irq status are cleared */
	readl_be(base + UART_FIFO_REG);
}

static int bcm6345_serial_init(void __iomem *base, ulong clk, u32 baudrate)
{
	u32 val;

	/* mask all irq and flush port */
	bcm6345_serial_disable(base);
	bcm6345_serial_flush(base);

	/* set uart control config */
	clrsetbits_be32(base + UART_CTL_REG,
			/* clear rx timeout */
			UART_CTL_RXTIMEOUT_MASK |
			/* clear stop bits */
			UART_CTL_STOPBITS_MASK |
			/* clear bits per symbol */
			UART_CTL_BITSPERSYM_MASK |
			/* clear xmit break */
			UART_CTL_XMITBRK_MASK |
			/* clear reserved bit */
			UART_CTL_RSVD_MASK |
			/* disable parity */
			UART_CTL_RXPAREN_MASK |
			UART_CTL_TXPAREN_MASK |
			/* disable loopback */
			UART_CTL_LOOPBACK_MASK,
			/* set timeout to 5 */
			UART_CTL_RXTIMEOUT_5 |
			/* set 8 bits/symbol */
			UART_CTL_BITSPERSYM_8 |
			/* set 1 stop bit */
			UART_CTL_STOPBITS_1 |
			/* set parity to even */
			UART_CTL_RXPAREVEN_MASK |
			UART_CTL_TXPAREVEN_MASK);

	/* set uart fifo config */
	clrsetbits_be32(base + UART_FIFO_CFG_REG,
			/* clear fifo config */
			UART_FIFO_CFG_RX_MASK |
			UART_FIFO_CFG_TX_MASK,
			/* set fifo config to 4 */
			UART_FIFO_CFG_RX_4 |
			UART_FIFO_CFG_TX_4);

	/* set baud rate */
	val = ((clk / baudrate) >> 4);
	if (val & 0x1)
		val = (val >> 1);
	else
		val = (val >> 1) - 1;
	writel_be(val, base + UART_BAUD_REG);

	/* clear interrupts */
	writel_be(0, base + UART_IR_REG);

	/* enable uart */
	bcm6345_serial_enable(base);

	return 0;
}

static int bcm6345_serial_pending(struct udevice *dev, bool input)
{
	struct bcm6345_serial_priv *priv = dev_get_priv(dev);
	u32 val = readl_be(priv->base + UART_IR_REG);

	if (input)
		return !!(val & UART_IR_STAT(UART_IR_RXNOTEMPTY));
	else
		return !(val & UART_IR_STAT(UART_IR_TXEMPTY));
}

static int bcm6345_serial_setbrg(struct udevice *dev, int baudrate)
{
	struct bcm6345_serial_priv *priv = dev_get_priv(dev);

	return bcm6345_serial_init(priv->base, priv->uartclk, baudrate);
}

static int bcm6345_serial_putc(struct udevice *dev, const char ch)
{
	struct bcm6345_serial_priv *priv = dev_get_priv(dev);
	u32 val;

	val = readl_be(priv->base + UART_IR_REG);
	if (!(val & UART_IR_STAT(UART_IR_TXEMPTY)))
		return -EAGAIN;

	writel_be(ch, priv->base + UART_FIFO_REG);

	return 0;
}

static int bcm6345_serial_getc(struct udevice *dev)
{
	struct bcm6345_serial_priv *priv = dev_get_priv(dev);
	u32 val;

	val = readl_be(priv->base + UART_IR_REG);
	if (val & UART_IR_STAT(UART_IR_RXOVER))
		setbits_be32(priv->base + UART_CTL_REG,
			     UART_CTL_RSTRXFIFO_MASK);
	if (!(val & UART_IR_STAT(UART_IR_RXNOTEMPTY)))
		return -EAGAIN;

	val = readl_be(priv->base + UART_FIFO_REG);
	if (val & UART_FIFO_ANYERR_MASK)
		return -EAGAIN;

	return val & UART_FIFO_VALID_MASK;
}

static int bcm6345_serial_probe(struct udevice *dev)
{
	struct bcm6345_serial_priv *priv = dev_get_priv(dev);
	struct clk clk;
	fdt_addr_t addr;
	fdt_size_t size;
	int ret;

	/* get address */
	addr = devfdt_get_addr_size_index(dev, 0, &size);
	if (addr == FDT_ADDR_T_NONE)
		return -EINVAL;

	priv->base = ioremap(addr, size);

	/* get clock rate */
	ret = clk_get_by_index(dev, 0, &clk);
	if (ret < 0)
		return ret;
	priv->uartclk = clk_get_rate(&clk);
	clk_free(&clk);

	/* initialize serial */
	return bcm6345_serial_init(priv->base, priv->uartclk, CONFIG_BAUDRATE);
}

static const struct dm_serial_ops bcm6345_serial_ops = {
	.putc = bcm6345_serial_putc,
	.pending = bcm6345_serial_pending,
	.getc = bcm6345_serial_getc,
	.setbrg = bcm6345_serial_setbrg,
};

static const struct udevice_id bcm6345_serial_ids[] = {
	{ .compatible = "brcm,bcm6345-uart" },
	{ /* sentinel */ }
};

U_BOOT_DRIVER(bcm6345_serial) = {
	.name = "bcm6345-uart",
	.id = UCLASS_SERIAL,
	.of_match = bcm6345_serial_ids,
	.probe = bcm6345_serial_probe,
	.priv_auto_alloc_size = sizeof(struct bcm6345_serial_priv),
	.ops = &bcm6345_serial_ops,
	.flags = DM_FLAG_PRE_RELOC,
};

#ifdef CONFIG_DEBUG_UART_BCM6345
static inline void _debug_uart_init(void)
{
	void __iomem *base = (void __iomem *)CONFIG_DEBUG_UART_BASE;

	bcm6345_serial_init(base, CONFIG_DEBUG_UART_CLOCK, CONFIG_BAUDRATE);
}

static inline void wait_xfered(void __iomem *base)
{
	do {
		u32 val = readl_be(base + UART_IR_REG);
		if (val & UART_IR_STAT(UART_IR_TXEMPTY))
			break;
	} while (1);
}

static inline void _debug_uart_putc(int ch)
{
	void __iomem *base = (void __iomem *)CONFIG_DEBUG_UART_BASE;

	wait_xfered(base);
	writel_be(ch, base + UART_FIFO_REG);
	wait_xfered(base);
}

DEBUG_UART_FUNCS
#endif
Commit	Line	Data
30581040 ÁFR	1	/*
	2	* Copyright (C) 2017 Álvaro Fernández Rojas <noltari@gmail.com>
	3	*
	4	* Derived from linux/drivers/tty/serial/bcm63xx_uart.c:
	5	* Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
	6	*
	7	* SPDX-License-Identifier: GPL-2.0+
	8	*/
	9
	10	#include <clk.h>
9d922450	11	#include <dm.h>
30581040 ÁFR	12	#include <debug_uart.h>
	13	#include <errno.h>
	14	#include <serial.h>
	15	#include <asm/io.h>
	16	#include <asm/types.h>
30581040 ÁFR	17
	18	/* UART Control register */
	19	#define UART_CTL_REG 0x0
	20	#define UART_CTL_RXTIMEOUT_MASK 0x1f
	21	#define UART_CTL_RXTIMEOUT_5 0x5
	22	#define UART_CTL_RSTRXFIFO_SHIFT 6
	23	#define UART_CTL_RSTRXFIFO_MASK (1 << UART_CTL_RSTRXFIFO_SHIFT)
	24	#define UART_CTL_RSTTXFIFO_SHIFT 7
	25	#define UART_CTL_RSTTXFIFO_MASK (1 << UART_CTL_RSTTXFIFO_SHIFT)
	26	#define UART_CTL_STOPBITS_SHIFT 8
	27	#define UART_CTL_STOPBITS_MASK (0xf << UART_CTL_STOPBITS_SHIFT)
	28	#define UART_CTL_STOPBITS_1 (0x7 << UART_CTL_STOPBITS_SHIFT)
	29	#define UART_CTL_BITSPERSYM_SHIFT 12
	30	#define UART_CTL_BITSPERSYM_MASK (0x3 << UART_CTL_BITSPERSYM_SHIFT)
	31	#define UART_CTL_BITSPERSYM_8 (0x3 << UART_CTL_BITSPERSYM_SHIFT)
	32	#define UART_CTL_XMITBRK_SHIFT 14
	33	#define UART_CTL_XMITBRK_MASK (1 << UART_CTL_XMITBRK_SHIFT)
	34	#define UART_CTL_RSVD_SHIFT 15
	35	#define UART_CTL_RSVD_MASK (1 << UART_CTL_RSVD_SHIFT)
	36	#define UART_CTL_RXPAREVEN_SHIFT 16
	37	#define UART_CTL_RXPAREVEN_MASK (1 << UART_CTL_RXPAREVEN_SHIFT)
	38	#define UART_CTL_RXPAREN_SHIFT 17
	39	#define UART_CTL_RXPAREN_MASK (1 << UART_CTL_RXPAREN_SHIFT)
	40	#define UART_CTL_TXPAREVEN_SHIFT 18
	41	#define UART_CTL_TXPAREVEN_MASK (1 << UART_CTL_TXPAREVEN_SHIFT)
	42	#define UART_CTL_TXPAREN_SHIFT 19
	43	#define UART_CTL_TXPAREN_MASK (1 << UART_CTL_TXPAREN_SHIFT)
	44	#define UART_CTL_LOOPBACK_SHIFT 20
	45	#define UART_CTL_LOOPBACK_MASK (1 << UART_CTL_LOOPBACK_SHIFT)
	46	#define UART_CTL_RXEN_SHIFT 21
	47	#define UART_CTL_RXEN_MASK (1 << UART_CTL_RXEN_SHIFT)
	48	#define UART_CTL_TXEN_SHIFT 22
	49	#define UART_CTL_TXEN_MASK (1 << UART_CTL_TXEN_SHIFT)
	50	#define UART_CTL_BRGEN_SHIFT 23
	51	#define UART_CTL_BRGEN_MASK (1 << UART_CTL_BRGEN_SHIFT)
	52
	53	/* UART Baudword register */
	54	#define UART_BAUD_REG 0x4
	55
	56	/* UART FIFO Config register */
	57	#define UART_FIFO_CFG_REG 0x8
	58	#define UART_FIFO_CFG_RX_SHIFT 8
	59	#define UART_FIFO_CFG_RX_MASK (0xf << UART_FIFO_CFG_RX_SHIFT)
	60	#define UART_FIFO_CFG_RX_4 (0x4 << UART_FIFO_CFG_RX_SHIFT)
	61	#define UART_FIFO_CFG_TX_SHIFT 12
	62	#define UART_FIFO_CFG_TX_MASK (0xf << UART_FIFO_CFG_TX_SHIFT)
	63	#define UART_FIFO_CFG_TX_4 (0x4 << UART_FIFO_CFG_TX_SHIFT)
	64
	65	/* UART Interrupt register */
	66	#define UART_IR_REG 0x10
	67	#define UART_IR_STAT(x) (1 << (x))
	68	#define UART_IR_TXEMPTY 5
	69	#define UART_IR_RXOVER 7
	70	#define UART_IR_RXNOTEMPTY 11
	71
	72	/* UART FIFO register */
	73	#define UART_FIFO_REG 0x14
	74	#define UART_FIFO_VALID_MASK 0xff
	75	#define UART_FIFO_FRAMEERR_SHIFT 8
	76	#define UART_FIFO_FRAMEERR_MASK (1 << UART_FIFO_FRAMEERR_SHIFT)
	77	#define UART_FIFO_PARERR_SHIFT 9
	78	#define UART_FIFO_PARERR_MASK (1 << UART_FIFO_PARERR_SHIFT)
	79	#define UART_FIFO_BRKDET_SHIFT 10
	80	#define UART_FIFO_BRKDET_MASK (1 << UART_FIFO_BRKDET_SHIFT)
81	#define UART_FIFO_ANYERR_MASK (UART_FIFO_FRAMEERR_MASK \| \
82	UART_FIFO_PARERR_MASK \| \
83	UART_FIFO_BRKDET_MASK)
84
85	struct bcm6345_serial_priv {
86	void __iomem *base;
87	ulong uartclk;
88	};
89
90	/* enable rx & tx operation on uart */
91	static void bcm6345_serial_enable(void __iomem *base)
92	{
93	setbits_be32(base + UART_CTL_REG, UART_CTL_BRGEN_MASK \|
94	UART_CTL_TXEN_MASK \| UART_CTL_RXEN_MASK);
95	}
96
97	/* disable rx & tx operation on uart */
98	static void bcm6345_serial_disable(void __iomem *base)
99	{
100	clrbits_be32(base + UART_CTL_REG, UART_CTL_BRGEN_MASK \|
101	UART_CTL_TXEN_MASK \| UART_CTL_RXEN_MASK);
102	}
103
104	/* clear all unread data in rx fifo and unsent data in tx fifo */
105	static void bcm6345_serial_flush(void __iomem *base)
106	{
107	/* empty rx and tx fifo */
108	setbits_be32(base + UART_CTL_REG, UART_CTL_RSTRXFIFO_MASK \|
109	UART_CTL_RSTTXFIFO_MASK);
110
111	/* read any pending char to make sure all irq status are cleared */
112	readl_be(base + UART_FIFO_REG);
113	}
114
115	static int bcm6345_serial_init(void __iomem *base, ulong clk, u32 baudrate)
116	{
117	u32 val;
118
119	/* mask all irq and flush port */
120	bcm6345_serial_disable(base);
121	bcm6345_serial_flush(base);
122
123	/* set uart control config */
124	clrsetbits_be32(base + UART_CTL_REG,
125	/* clear rx timeout */
126	UART_CTL_RXTIMEOUT_MASK \|
127	/* clear stop bits */
128	UART_CTL_STOPBITS_MASK \|
129	/* clear bits per symbol */
130	UART_CTL_BITSPERSYM_MASK \|
131	/* clear xmit break */
132	UART_CTL_XMITBRK_MASK \|
133	/* clear reserved bit */
134	UART_CTL_RSVD_MASK \|
135	/* disable parity */
136	UART_CTL_RXPAREN_MASK \|
137	UART_CTL_TXPAREN_MASK \|
138	/* disable loopback */
139	UART_CTL_LOOPBACK_MASK,
140	/* set timeout to 5 */
141	UART_CTL_RXTIMEOUT_5 \|
142	/* set 8 bits/symbol */
143	UART_CTL_BITSPERSYM_8 \|
6b7185f3 ÁFR	144	/* set 1 stop bit */
6b7185f3 ÁFR	145	UART_CTL_STOPBITS_1 \|
30581040 ÁFR	146	/* set parity to even */
	147	UART_CTL_RXPAREVEN_MASK \|
	148	UART_CTL_TXPAREVEN_MASK);
	149
	150	/* set uart fifo config */
	151	clrsetbits_be32(base + UART_FIFO_CFG_REG,
	152	/* clear fifo config */
	153	UART_FIFO_CFG_RX_MASK \|
	154	UART_FIFO_CFG_TX_MASK,
	155	/* set fifo config to 4 */
	156	UART_FIFO_CFG_RX_4 \|
	157	UART_FIFO_CFG_TX_4);
	158
	159	/* set baud rate */
24f85482	160	val = ((clk / baudrate) >> 4);
30581040	161	if (val & 0x1)
24f85482	162	val = (val >> 1);
30581040	163	else
24f85482	164	val = (val >> 1) - 1;
30581040 ÁFR	165	writel_be(val, base + UART_BAUD_REG);
	166
	167	/* clear interrupts */
	168	writel_be(0, base + UART_IR_REG);
	169
	170	/* enable uart */
	171	bcm6345_serial_enable(base);
	172
	173	return 0;
	174	}
	175
	176	static int bcm6345_serial_pending(struct udevice *dev, bool input)
	177	{
	178	struct bcm6345_serial_priv *priv = dev_get_priv(dev);
	179	u32 val = readl_be(priv->base + UART_IR_REG);
	180
	181	if (input)
	182	return !!(val & UART_IR_STAT(UART_IR_RXNOTEMPTY));
	183	else
	184	return !(val & UART_IR_STAT(UART_IR_TXEMPTY));
	185	}
	186
	187	static int bcm6345_serial_setbrg(struct udevice *dev, int baudrate)
	188	{
	189	struct bcm6345_serial_priv *priv = dev_get_priv(dev);
	190
	191	return bcm6345_serial_init(priv->base, priv->uartclk, baudrate);
	192	}
	193
	194	static int bcm6345_serial_putc(struct udevice *dev, const char ch)
	195	{
	196	struct bcm6345_serial_priv *priv = dev_get_priv(dev);
	197	u32 val;
	198
	199	val = readl_be(priv->base + UART_IR_REG);
	200	if (!(val & UART_IR_STAT(UART_IR_TXEMPTY)))
	201	return -EAGAIN;
	202
	203	writel_be(ch, priv->base + UART_FIFO_REG);
	204
	205	return 0;
	206	}
	207
	208	static int bcm6345_serial_getc(struct udevice *dev)
	209	{
	210	struct bcm6345_serial_priv *priv = dev_get_priv(dev);
	211	u32 val;
	212
	213	val = readl_be(priv->base + UART_IR_REG);
	214	if (val & UART_IR_STAT(UART_IR_RXOVER))
	215	setbits_be32(priv->base + UART_CTL_REG,
	216	UART_CTL_RSTRXFIFO_MASK);
	217	if (!(val & UART_IR_STAT(UART_IR_RXNOTEMPTY)))
	218	return -EAGAIN;
	219
	220	val = readl_be(priv->base + UART_FIFO_REG);
	221	if (val & UART_FIFO_ANYERR_MASK)
	222	return -EAGAIN;
	223
	224	return val & UART_FIFO_VALID_MASK;
	225	}
	226
	227	static int bcm6345_serial_probe(struct udevice *dev)
	228	{
229	struct bcm6345_serial_priv *priv = dev_get_priv(dev);
230	struct clk clk;
231	fdt_addr_t addr;
232	fdt_size_t size;
233	int ret;
234
235	/* get address */
a821c4af	236	addr = devfdt_get_addr_size_index(dev, 0, &size);
30581040 ÁFR	237	if (addr == FDT_ADDR_T_NONE)
	238	return -EINVAL;
	239
	240	priv->base = ioremap(addr, size);
	241
	242	/* get clock rate */
	243	ret = clk_get_by_index(dev, 0, &clk);
	244	if (ret < 0)
	245	return ret;
24f85482	246	priv->uartclk = clk_get_rate(&clk);
30581040 ÁFR	247	clk_free(&clk);
	248
	249	/* initialize serial */
	250	return bcm6345_serial_init(priv->base, priv->uartclk, CONFIG_BAUDRATE);
	251	}
	252
	253	static const struct dm_serial_ops bcm6345_serial_ops = {
	254	.putc = bcm6345_serial_putc,
	255	.pending = bcm6345_serial_pending,
	256	.getc = bcm6345_serial_getc,
	257	.setbrg = bcm6345_serial_setbrg,
	258	};
	259
	260	static const struct udevice_id bcm6345_serial_ids[] = {
	261	{ .compatible = "brcm,bcm6345-uart" },
	262	{ /* sentinel */ }
	263	};
	264
	265	U_BOOT_DRIVER(bcm6345_serial) = {
	266	.name = "bcm6345-uart",
	267	.id = UCLASS_SERIAL,
	268	.of_match = bcm6345_serial_ids,
	269	.probe = bcm6345_serial_probe,
	270	.priv_auto_alloc_size = sizeof(struct bcm6345_serial_priv),
	271	.ops = &bcm6345_serial_ops,
	272	.flags = DM_FLAG_PRE_RELOC,
	273	};
	274
	275	#ifdef CONFIG_DEBUG_UART_BCM6345
	276	static inline void _debug_uart_init(void)
	277	{
	278	void __iomem base = (void __iomem )CONFIG_DEBUG_UART_BASE;
	279
	280	bcm6345_serial_init(base, CONFIG_DEBUG_UART_CLOCK, CONFIG_BAUDRATE);
	281	}
	282
	283	static inline void wait_xfered(void __iomem *base)
	284	{
	285	do {
	286	u32 val = readl_be(base + UART_IR_REG);
	287	if (val & UART_IR_STAT(UART_IR_TXEMPTY))
	288	break;
	289	} while (1);
	290	}
	291
	292	static inline void _debug_uart_putc(int ch)
	293	{
	294	void __iomem base = (void __iomem )CONFIG_DEBUG_UART_BASE;
	295
	296	wait_xfered(base);
	297	writel_be(ch, base + UART_FIFO_REG);
	298	wait_xfered(base);
	299	}
	300
	301	DEBUG_UART_FUNCS
	302	#endif