[people/ms/u-boot.git] / drivers / video / anx9804.c

/*
 * (C) 2015 Hans de Goede <hdegoede@redhat.com>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

/*
 * Support for the ANX9804 bridge chip, which can take pixel data coming
 * from a parallel LCD interface and translate it on the flight into a DP
 * interface for driving eDP TFT displays.
 */

#include <common.h>
#include <i2c.h>
#include "anx98xx-edp.h"
#include "anx9804.h"

/**
 * anx9804_init() - Init anx9804 parallel lcd to edp bridge chip
 *
 * This function will init an anx9804 parallel lcd to dp bridge chip
 * using the passed in parameters.
 *
 * @i2c_bus:	Number of the i2c bus to which the anx9804 is connected.
 * @lanes:	Number of displayport lanes to use
 * @data_rate:	Register value for the bandwidth reg 0x06: 1.62G, 0x0a: 2.7G
 * @bpp:	Bits per pixel, must be 18 or 24
 */
void anx9804_init(unsigned int i2c_bus, u8 lanes, u8 data_rate, int bpp)
{
	unsigned int orig_i2c_bus = i2c_get_bus_num();
	u8 c, colordepth;
	int i;

	i2c_set_bus_num(i2c_bus);

	if (bpp == 18)
		colordepth = 0x00; /* 6 bit */
	else
		colordepth = 0x10; /* 8 bit */

	/* Reset */
	i2c_reg_write(0x39, ANX9804_RST_CTRL_REG, 1);
	mdelay(100);
	i2c_reg_write(0x39, ANX9804_RST_CTRL_REG, 0);

	/* Write 0 to the powerdown reg (powerup everything) */
	i2c_reg_write(0x39, ANX9804_POWERD_CTRL_REG, 0);

	c = i2c_reg_read(0x39, ANX9804_DEV_IDH_REG);
	if (c != 0x98) {
		printf("Error anx9804 chipid mismatch\n");
		i2c_set_bus_num(orig_i2c_bus);
		return;
	}

	for (i = 0; i < 100; i++) {
		c = i2c_reg_read(0x38, ANX9804_SYS_CTRL2_REG);
		i2c_reg_write(0x38, ANX9804_SYS_CTRL2_REG, c);
		c = i2c_reg_read(0x38, ANX9804_SYS_CTRL2_REG);
		if ((c & ANX9804_SYS_CTRL2_CHA_STA) == 0)
			break;

		mdelay(5);
	}
	if (i == 100)
		printf("Error anx9804 clock is not stable\n");

	i2c_reg_write(0x39, ANX9804_VID_CTRL2_REG, colordepth);
	
	/* Set a bunch of analog related register values */
	i2c_reg_write(0x38, ANX9804_PLL_CTRL_REG, 0x07); 
	i2c_reg_write(0x39, ANX9804_PLL_FILTER_CTRL3, 0x19); 
	i2c_reg_write(0x39, ANX9804_PLL_CTRL3, 0xd9); 
	i2c_reg_write(0x39, ANX9804_RST_CTRL2_REG, ANX9804_RST_CTRL2_AC_MODE);
	i2c_reg_write(0x39, ANX9804_ANALOG_DEBUG_REG1, 0xf0);
	i2c_reg_write(0x39, ANX9804_ANALOG_DEBUG_REG3, 0x99);
	i2c_reg_write(0x39, ANX9804_PLL_FILTER_CTRL1, 0x7b);
	i2c_reg_write(0x38, ANX9804_LINK_DEBUG_REG, 0x30);
	i2c_reg_write(0x39, ANX9804_PLL_FILTER_CTRL, 0x06);

	/* Force HPD */
	i2c_reg_write(0x38, ANX9804_SYS_CTRL3_REG,
		      ANX9804_SYS_CTRL3_F_HPD | ANX9804_SYS_CTRL3_HPD_CTRL);

	/* Power up and configure lanes */
	i2c_reg_write(0x38, ANX9804_ANALOG_POWER_DOWN_REG, 0x00);
	i2c_reg_write(0x38, ANX9804_TRAINING_LANE0_SET_REG, 0x00);
	i2c_reg_write(0x38, ANX9804_TRAINING_LANE1_SET_REG, 0x00);
	i2c_reg_write(0x38, ANX9804_TRAINING_LANE2_SET_REG, 0x00);
	i2c_reg_write(0x38, ANX9804_TRAINING_LANE3_SET_REG, 0x00);

	/* Reset AUX CH */
	i2c_reg_write(0x39, ANX9804_RST_CTRL2_REG,
		      ANX9804_RST_CTRL2_AC_MODE | ANX9804_RST_CTRL2_AUX);
	i2c_reg_write(0x39, ANX9804_RST_CTRL2_REG,
		      ANX9804_RST_CTRL2_AC_MODE);

	/* Powerdown audio and some other unused bits */
	i2c_reg_write(0x39, ANX9804_POWERD_CTRL_REG, ANX9804_POWERD_AUDIO);
	i2c_reg_write(0x38, ANX9804_HDCP_CONTROL_0_REG, 0x00);
	i2c_reg_write(0x38, 0xa7, 0x00);

	/* Set data-rate / lanes */
	i2c_reg_write(0x38, ANX9804_LINK_BW_SET_REG, data_rate);
	i2c_reg_write(0x38, ANX9804_LANE_COUNT_SET_REG, lanes);

	/* Link training */	
	i2c_reg_write(0x38, ANX9804_LINK_TRAINING_CTRL_REG,
		      ANX9804_LINK_TRAINING_CTRL_EN);
	mdelay(5);
	for (i = 0; i < 100; i++) {
		c = i2c_reg_read(0x38, ANX9804_LINK_TRAINING_CTRL_REG);
		if ((c & 0x01) == 0)
			break;

		mdelay(5);
	}
	if(i == 100) {
		printf("Error anx9804 link training timeout\n");
		i2c_set_bus_num(orig_i2c_bus);
		return;
	}

	/* Enable */
	i2c_reg_write(0x39, ANX9804_VID_CTRL1_REG,
		      ANX9804_VID_CTRL1_VID_EN | ANX9804_VID_CTRL1_EDGE);
	/* Force stream valid */
	i2c_reg_write(0x38, ANX9804_SYS_CTRL3_REG,
		      ANX9804_SYS_CTRL3_F_HPD | ANX9804_SYS_CTRL3_HPD_CTRL |
		      ANX9804_SYS_CTRL3_F_VALID | ANX9804_SYS_CTRL3_VALID_CTRL);

	i2c_set_bus_num(orig_i2c_bus);
}
Commit	Line	Data
66525bb7 HG	1	/*
	2	* (C) 2015 Hans de Goede <hdegoede@redhat.com>
	3	*
	4	* SPDX-License-Identifier: GPL-2.0+
	5	*/
	6
	7	/*
	8	* Support for the ANX9804 bridge chip, which can take pixel data coming
	9	* from a parallel LCD interface and translate it on the flight into a DP
	10	* interface for driving eDP TFT displays.
	11	*/
	12
	13	#include <common.h>
	14	#include <i2c.h>
24bf59d0	15	#include "anx98xx-edp.h"
66525bb7 HG	16	#include "anx9804.h"
66525bb7 HG	17
66525bb7 HG	18	/**
	19	* anx9804_init() - Init anx9804 parallel lcd to edp bridge chip
	20	*
	21	* This function will init an anx9804 parallel lcd to dp bridge chip
	22	* using the passed in parameters.
	23	*
	24	* @i2c_bus: Number of the i2c bus to which the anx9804 is connected.
	25	* @lanes: Number of displayport lanes to use
	26	* @data_rate: Register value for the bandwidth reg 0x06: 1.62G, 0x0a: 2.7G
	27	* @bpp: Bits per pixel, must be 18 or 24
	28	*/
	29	void anx9804_init(unsigned int i2c_bus, u8 lanes, u8 data_rate, int bpp)
	30	{
	31	unsigned int orig_i2c_bus = i2c_get_bus_num();
	32	u8 c, colordepth;
	33	int i;
	34
	35	i2c_set_bus_num(i2c_bus);
	36
	37	if (bpp == 18)
	38	colordepth = 0x00; /* 6 bit */
	39	else
	40	colordepth = 0x10; /* 8 bit */
	41
	42	/* Reset */
	43	i2c_reg_write(0x39, ANX9804_RST_CTRL_REG, 1);
	44	mdelay(100);
	45	i2c_reg_write(0x39, ANX9804_RST_CTRL_REG, 0);
	46
	47	/* Write 0 to the powerdown reg (powerup everything) */
	48	i2c_reg_write(0x39, ANX9804_POWERD_CTRL_REG, 0);
	49
	50	c = i2c_reg_read(0x39, ANX9804_DEV_IDH_REG);
	51	if (c != 0x98) {
	52	printf("Error anx9804 chipid mismatch\n");
	53	i2c_set_bus_num(orig_i2c_bus);
	54	return;
	55	}
	56
	57	for (i = 0; i < 100; i++) {
	58	c = i2c_reg_read(0x38, ANX9804_SYS_CTRL2_REG);
	59	i2c_reg_write(0x38, ANX9804_SYS_CTRL2_REG, c);
	60	c = i2c_reg_read(0x38, ANX9804_SYS_CTRL2_REG);
	61	if ((c & ANX9804_SYS_CTRL2_CHA_STA) == 0)
	62	break;
	63
	64	mdelay(5);
	65	}
	66	if (i == 100)
	67	printf("Error anx9804 clock is not stable\n");
	68
	69	i2c_reg_write(0x39, ANX9804_VID_CTRL2_REG, colordepth);
	70
	71	/* Set a bunch of analog related register values */
	72	i2c_reg_write(0x38, ANX9804_PLL_CTRL_REG, 0x07);
	73	i2c_reg_write(0x39, ANX9804_PLL_FILTER_CTRL3, 0x19);
	74	i2c_reg_write(0x39, ANX9804_PLL_CTRL3, 0xd9);
	75	i2c_reg_write(0x39, ANX9804_RST_CTRL2_REG, ANX9804_RST_CTRL2_AC_MODE);
	76	i2c_reg_write(0x39, ANX9804_ANALOG_DEBUG_REG1, 0xf0);
	77	i2c_reg_write(0x39, ANX9804_ANALOG_DEBUG_REG3, 0x99);
	78	i2c_reg_write(0x39, ANX9804_PLL_FILTER_CTRL1, 0x7b);
	79	i2c_reg_write(0x38, ANX9804_LINK_DEBUG_REG, 0x30);
	80	i2c_reg_write(0x39, ANX9804_PLL_FILTER_CTRL, 0x06);
	81
82	/* Force HPD */
83	i2c_reg_write(0x38, ANX9804_SYS_CTRL3_REG,
84	ANX9804_SYS_CTRL3_F_HPD \| ANX9804_SYS_CTRL3_HPD_CTRL);
85
86	/* Power up and configure lanes */
87	i2c_reg_write(0x38, ANX9804_ANALOG_POWER_DOWN_REG, 0x00);
88	i2c_reg_write(0x38, ANX9804_TRAINING_LANE0_SET_REG, 0x00);
89	i2c_reg_write(0x38, ANX9804_TRAINING_LANE1_SET_REG, 0x00);
90	i2c_reg_write(0x38, ANX9804_TRAINING_LANE2_SET_REG, 0x00);
91	i2c_reg_write(0x38, ANX9804_TRAINING_LANE3_SET_REG, 0x00);
92
93	/* Reset AUX CH */
94	i2c_reg_write(0x39, ANX9804_RST_CTRL2_REG,
95	ANX9804_RST_CTRL2_AC_MODE \| ANX9804_RST_CTRL2_AUX);
96	i2c_reg_write(0x39, ANX9804_RST_CTRL2_REG,
97	ANX9804_RST_CTRL2_AC_MODE);
98
99	/* Powerdown audio and some other unused bits */
100	i2c_reg_write(0x39, ANX9804_POWERD_CTRL_REG, ANX9804_POWERD_AUDIO);
101	i2c_reg_write(0x38, ANX9804_HDCP_CONTROL_0_REG, 0x00);
102	i2c_reg_write(0x38, 0xa7, 0x00);
103
104	/* Set data-rate / lanes */
105	i2c_reg_write(0x38, ANX9804_LINK_BW_SET_REG, data_rate);
106	i2c_reg_write(0x38, ANX9804_LANE_COUNT_SET_REG, lanes);
107
108	/* Link training */
109	i2c_reg_write(0x38, ANX9804_LINK_TRAINING_CTRL_REG,
110	ANX9804_LINK_TRAINING_CTRL_EN);
111	mdelay(5);
112	for (i = 0; i < 100; i++) {
113	c = i2c_reg_read(0x38, ANX9804_LINK_TRAINING_CTRL_REG);
114	if ((c & 0x01) == 0)
115	break;
116
117	mdelay(5);
118	}
119	if(i == 100) {
120	printf("Error anx9804 link training timeout\n");
121	i2c_set_bus_num(orig_i2c_bus);
122	return;
123	}
124
125	/* Enable */
126	i2c_reg_write(0x39, ANX9804_VID_CTRL1_REG,
127	ANX9804_VID_CTRL1_VID_EN \| ANX9804_VID_CTRL1_EDGE);
128	/* Force stream valid */
129	i2c_reg_write(0x38, ANX9804_SYS_CTRL3_REG,
130	ANX9804_SYS_CTRL3_F_HPD \| ANX9804_SYS_CTRL3_HPD_CTRL \|
131	ANX9804_SYS_CTRL3_F_VALID \| ANX9804_SYS_CTRL3_VALID_CTRL);
132
133	i2c_set_bus_num(orig_i2c_bus);
134	}