[people/ms/u-boot.git] / include / cmd_boot.h

/*
 * (C) Copyright 2000
 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

/*
 * Boot support
 */
#ifndef	_CMD_BOOT_H
#define	_CMD_BOOT_H

#if (CONFIG_COMMANDS & CFG_CMD_BDI)
#define	CMD_TBL_BDINFO	MK_CMD_TBL_ENTRY(					\
	"bdinfo",	2,	1,	1,	do_bdinfo,			\
	"bdinfo  - print Board Info structure\n",				\
	NULL									\
),
int do_bdinfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);

#else
#define CMD_TBL_BDINFO
#endif


#define CMD_TBL_GO	MK_CMD_TBL_ENTRY(					\
	"go",		2,	CFG_MAXARGS,	1,	do_go,			\
	"go      - start application at address 'addr'\n",			\
	"addr [arg ...]\n    - start application at address 'addr'\n"		\
	"      passing 'arg' as arguments\n"					\
),
int do_go (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);

#if (CONFIG_COMMANDS & CFG_CMD_LOADS)
#ifdef	CFG_LOADS_BAUD_CHANGE
#define	CMD_TBL_LOADS	MK_CMD_TBL_ENTRY(					\
	"loads",	5,	3,	0,	do_load_serial,			\
	"loads   - load S-Record file over serial line\n",			\
	"[ off ] [ baud ]\n"							\
	"    - load S-Record file over serial line"				\
	" with offset 'off' and baudrate 'baud'\n"				\
),
#else	/* ! CFG_LOADS_BAUD_CHANGE */
#define	CMD_TBL_LOADS	MK_CMD_TBL_ENTRY(					\
	"loads",	5,	2,	0,	do_load_serial,			\
	"loads   - load S-Record file over serial line\n",			\
	"[ off ]\n"								\
	"    - load S-Record file over serial line with offset 'off'\n"		\
),
#endif	/* CFG_LOADS_BAUD_CHANGE */
int do_load_serial (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);

/*
 * SAVES always requires LOADS support, but not vice versa
 */
#if (CONFIG_COMMANDS & CFG_CMD_SAVES)
#ifdef	CFG_LOADS_BAUD_CHANGE
#define	CMD_TBL_SAVES	MK_CMD_TBL_ENTRY(					\
	"saves",	5,	4,	0,	do_save_serial,			\
	"saves   - save S-Record file over serial line\n",			\
	"[ off ] [size] [ baud ]\n"							\
	"    - save S-Record file over serial line"				\
	" with offset 'off', size 'size' and baudrate 'baud'\n"				\
),
#else	/* ! CFG_LOADS_BAUD_CHANGE */
#define	CMD_TBL_SAVES	MK_CMD_TBL_ENTRY(					\
	"saves",	5,	3,	0,	do_save_serial,			\
	"saves   - save S-Record file over serial line\n",			\
	"[ off ] [size]\n"								\
	"    - save S-Record file over serial line with offset 'off' and size 'size'\n"		\
),
#endif	/* CFG_LOADS_BAUD_CHANGE */

int do_save_serial (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
#else	/* ! CFG_CMD_SAVES */
#define CMD_TBL_SAVES
#endif	/* CFG_CMD_SAVES */

#else	/* ! CFG_CMD_LOADS */
#define CMD_TBL_LOADS
#define CMD_TBL_SAVES
#endif	/* CFG_CMD_LOADS */


#if (CONFIG_COMMANDS & CFG_CMD_LOADB)
#define	CMD_TBL_LOADB	MK_CMD_TBL_ENTRY(					\
	"loadb",	5,	3,	0,	do_load_serial_bin,		\
	"loadb   - load binary file over serial line (kermit mode)\n",		\
	"[ off ] [ baud ]\n"							\
	"    - load binary file over serial line"				\
	" with offset 'off' and baudrate 'baud'\n"				\
),
int do_load_serial_bin (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);

#else
#define CMD_TBL_LOADB
#endif	/* CFG_CMD_LOADB */

#define CMD_TBL_RESET	MK_CMD_TBL_ENTRY(					\
	"reset",	5,	1,	0,	do_reset,			\
	"reset   - Perform RESET of the CPU\n",					\
	NULL									\
),

/* Implemented in $(CPU)/cpu.c */
int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);

#if (CONFIG_COMMANDS & CFG_CMD_HWFLOW)
#define	CMD_TBL_HWFLOW	MK_CMD_TBL_ENTRY(					\
	"hwflow [on|off]",	2,	2,	0,	do_hwflow,			\
    "hwflow  - turn the harwdare flow control on/off\n", \
	"\n - change RTS/CTS hardware flow control over serial line\n" \
),

int do_hwflow (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);

#else
#define CMD_TBL_HWFLOW
#endif
#endif	/* _CMD_BOOT_H */
Commit	Line	Data
4ef60b6d WD	1	/*
	2	* (C) Copyright 2000
	3	* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
	4	*
	5	* See file CREDITS for list of people who contributed to this
	6	* project.
	7	*
	8	* This program is free software; you can redistribute it and/or
	9	* modify it under the terms of the GNU General Public License as
	10	* published by the Free Software Foundation; either version 2 of
	11	* the License, or (at your option) any later version.
	12	*
	13	* This program is distributed in the hope that it will be useful,
	14	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	15	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	16	* GNU General Public License for more details.
	17	*
	18	* You should have received a copy of the GNU General Public License
	19	* along with this program; if not, write to the Free Software
	20	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	21	* MA 02111-1307 USA
	22	*/
	23
	24	/*
	25	* Boot support
	26	*/
	27	#ifndef _CMD_BOOT_H
	28	#define _CMD_BOOT_H
	29
	30	#if (CONFIG_COMMANDS & CFG_CMD_BDI)
	31	#define CMD_TBL_BDINFO MK_CMD_TBL_ENTRY( \
	32	"bdinfo", 2, 1, 1, do_bdinfo, \
	33	"bdinfo - print Board Info structure\n", \
	34	NULL \
	35	),
	36	int do_bdinfo (cmd_tbl_t cmdtp, int flag, int argc, char argv[]);
	37
	38	#else
	39	#define CMD_TBL_BDINFO
	40	#endif
	41
	42
	43	#define CMD_TBL_GO MK_CMD_TBL_ENTRY( \
	44	"go", 2, CFG_MAXARGS, 1, do_go, \
	45	"go - start application at address 'addr'\n", \
	46	"addr [arg ...]\n - start application at address 'addr'\n" \
	47	" passing 'arg' as arguments\n" \
	48	),
	49	int do_go (cmd_tbl_t cmdtp, int flag, int argc, char argv[]);
	50
	51	#if (CONFIG_COMMANDS & CFG_CMD_LOADS)
	52	#ifdef CFG_LOADS_BAUD_CHANGE
	53	#define CMD_TBL_LOADS MK_CMD_TBL_ENTRY( \
	54	"loads", 5, 3, 0, do_load_serial, \
	55	"loads - load S-Record file over serial line\n", \
	56	"[ off ] [ baud ]\n" \
	57	" - load S-Record file over serial line" \
	58	" with offset 'off' and baudrate 'baud'\n" \
	59	),
	60	#else /* ! CFG_LOADS_BAUD_CHANGE */
	61	#define CMD_TBL_LOADS MK_CMD_TBL_ENTRY( \
	62	"loads", 5, 2, 0, do_load_serial, \
	63	"loads - load S-Record file over serial line\n", \
	64	"[ off ]\n" \
65	" - load S-Record file over serial line with offset 'off'\n" \
66	),
67	#endif /* CFG_LOADS_BAUD_CHANGE */
68	int do_load_serial (cmd_tbl_t cmdtp, int flag, int argc, char argv[]);
69
70	/*
71	* SAVES always requires LOADS support, but not vice versa
72	*/
73	#if (CONFIG_COMMANDS & CFG_CMD_SAVES)
74	#ifdef CFG_LOADS_BAUD_CHANGE
75	#define CMD_TBL_SAVES MK_CMD_TBL_ENTRY( \
76	"saves", 5, 4, 0, do_save_serial, \
77	"saves - save S-Record file over serial line\n", \
78	"[ off ] [size] [ baud ]\n" \
79	" - save S-Record file over serial line" \
80	" with offset 'off', size 'size' and baudrate 'baud'\n" \
81	),
82	#else /* ! CFG_LOADS_BAUD_CHANGE */
83	#define CMD_TBL_SAVES MK_CMD_TBL_ENTRY( \
84	"saves", 5, 3, 0, do_save_serial, \
85	"saves - save S-Record file over serial line\n", \
86	"[ off ] [size]\n" \
87	" - save S-Record file over serial line with offset 'off' and size 'size'\n" \
88	),
89	#endif /* CFG_LOADS_BAUD_CHANGE */
90
91	int do_save_serial (cmd_tbl_t cmdtp, int flag, int argc, char argv[]);
92	#else /* ! CFG_CMD_SAVES */
93	#define CMD_TBL_SAVES
94	#endif /* CFG_CMD_SAVES */
95
96	#else /* ! CFG_CMD_LOADS */
97	#define CMD_TBL_LOADS
98	#define CMD_TBL_SAVES
99	#endif /* CFG_CMD_LOADS */
100
101
102	#if (CONFIG_COMMANDS & CFG_CMD_LOADB)
103	#define CMD_TBL_LOADB MK_CMD_TBL_ENTRY( \
104	"loadb", 5, 3, 0, do_load_serial_bin, \
105	"loadb - load binary file over serial line (kermit mode)\n", \
106	"[ off ] [ baud ]\n" \
107	" - load binary file over serial line" \
108	" with offset 'off' and baudrate 'baud'\n" \
109	),
110	int do_load_serial_bin (cmd_tbl_t cmdtp, int flag, int argc, char argv[]);
111
112	#else
113	#define CMD_TBL_LOADB
114	#endif /* CFG_CMD_LOADB */
115
116	#define CMD_TBL_RESET MK_CMD_TBL_ENTRY( \
117	"reset", 5, 1, 0, do_reset, \
118	"reset - Perform RESET of the CPU\n", \
119	NULL \
120	),
121
122	/* Implemented in $(CPU)/cpu.c */
123	int do_reset (cmd_tbl_t cmdtp, int flag, int argc, char argv[]);
124
125	#if (CONFIG_COMMANDS & CFG_CMD_HWFLOW)
126	#define CMD_TBL_HWFLOW MK_CMD_TBL_ENTRY( \
127	"hwflow [on\|off]", 2, 2, 0, do_hwflow, \
128	"hwflow - turn the harwdare flow control on/off\n", \
129	"\n - change RTS/CTS hardware flow control over serial line\n" \
130	),
131
132	int do_hwflow (cmd_tbl_t cmdtp, int flag, int argc, char argv[]);
133
134	#else
135	#define CMD_TBL_HWFLOW
136	#endif
137	#endif /* _CMD_BOOT_H */