[people/ms/u-boot.git] / include / config_cmd_all.h

/*
 * Copyright 2007 Freescale Semiconductor, Inc.
 *
 * This file is licensed under the terms of the GNU General Public
 * License Version 2. This file is licensed "as is" without any
 * warranty of any kind, whether express or implied.
 */

#ifndef _CONFIG_CMD_ALL_H
#define _CONFIG_CMD_ALL_H

/*
 * Alphabetical list of all possible commands.
 */

#define CONFIG_CMD_ASKENV	/* ask for env variable		*/
#define CONFIG_CMD_AUTOSCRIPT	/* Autoscript Support		*/
#define CONFIG_CMD_BDI	       	/* bdinfo			*/
#define CONFIG_CMD_BEDBUG	/* Include BedBug Debugger	*/
#define CONFIG_CMD_BMP		/* BMP support			*/
#define CONFIG_CMD_BOOTD	/* bootd			*/
#define CONFIG_CMD_BSP		/* Board Specific functions	*/
#define CONFIG_CMD_CACHE	/* icache, dcache		*/
#define CONFIG_CMD_CDP		/* Cisco Discovery Protocol 	*/
#define CONFIG_CMD_CONSOLE	/* coninfo			*/
#define CONFIG_CMD_DATE		/* support for RTC, date/time...*/
#define CONFIG_CMD_DHCP		/* DHCP Support			*/
#define CONFIG_CMD_DIAG		/* Diagnostics			*/
#define CONFIG_CMD_DISPLAY	/* Display support		*/
#define CONFIG_CMD_DOC		/* Disk-On-Chip Support		*/
#define CONFIG_CMD_DTT		/* Digital Therm and Thermostat */
#define CONFIG_CMD_ECHO		/* echo arguments		*/
#define CONFIG_CMD_EEPROM	/* EEPROM read/write support	*/
#define CONFIG_CMD_ELF		/* ELF (VxWorks) load/boot cmd	*/
#define CONFIG_CMD_ENV		/* saveenv			*/
#define CONFIG_CMD_EXT2		/* EXT2 Support			*/
#define CONFIG_CMD_FAT		/* FAT support			*/
#define CONFIG_CMD_FDC		/* Floppy Disk Support		*/
#define CONFIG_CMD_FDOS		/* Floppy DOS support		*/
#define CONFIG_CMD_FLASH	/* flinfo, erase, protect	*/
#define CONFIG_CMD_FPGA		/* FPGA configuration Support	*/
#define CONFIG_CMD_HWFLOW	/* RTS/CTS hw flow control	*/
#define CONFIG_CMD_I2C		/* I2C serial bus support	*/
#define CONFIG_CMD_IDE		/* IDE harddisk support		*/
#define CONFIG_CMD_IMI		/* iminfo			*/
#define CONFIG_CMD_IMLS		/* List all found images	*/
#define CONFIG_CMD_IMMAP	/* IMMR dump support		*/
#define CONFIG_CMD_IRQ		/* irqinfo			*/
#define CONFIG_CMD_ITEST	/* Integer (and string) test	*/
#define CONFIG_CMD_JFFS2	/* JFFS2 Support		*/
#define CONFIG_CMD_KGDB		/* kgdb				*/
#define CONFIG_CMD_LOADB	/* loadb			*/
#define CONFIG_CMD_LOADS	/* loads			*/
#define CONFIG_CMD_MEMORY	/* md mm nm mw cp cmp crc base loop mtest */
#define CONFIG_CMD_MFSL		/* FSL support for Microblaze	*/
#define CONFIG_CMD_MII		/* MII support			*/
#define CONFIG_CMD_MISC		/* Misc functions like sleep etc*/
#define CONFIG_CMD_MMC		/* MMC support			*/
#define CONFIG_CMD_NAND		/* NAND support			*/
#define CONFIG_CMD_NET		/* bootp, tftpboot, rarpboot	*/
#define CONFIG_CMD_NFS		/* NFS support			*/
#define CONFIG_CMD_PCI		/* pciinfo			*/
#define CONFIG_CMD_PCMCIA	/* PCMCIA support		*/
#define CONFIG_CMD_PING		/* ping support			*/
#define CONFIG_CMD_PORTIO	/* Port I/O			*/
#define CONFIG_CMD_REGINFO	/* Register dump		*/
#define CONFIG_CMD_REISER	/* Reiserfs support		*/
#define CONFIG_CMD_RUN		/* run command in env variable	*/
#define CONFIG_CMD_SAVES	/* save S record dump		*/
#define CONFIG_CMD_SCSI		/* SCSI Support			*/
#define CONFIG_CMD_SDRAM	/* SDRAM DIMM SPD info printout */
#define CONFIG_CMD_SETGETDCR	/* DCR support on 4xx		*/
#define CONFIG_CMD_SNTP		/* SNTP support			*/
#define CONFIG_CMD_SPI		/* SPI utility			*/
#define CONFIG_CMD_UNIVERSE	/* Tundra Universe Support	*/
#define CONFIG_CMD_USB		/* USB Support			*/
#define CONFIG_CMD_VFD		/* VFD support (TRAB)		*/
#define CONFIG_CMD_XIMG		/* Load part of Multi Image	*/
#define CONFIG_CMD_MUX		/* AT91 MMC/SPI Mux Support     */

#endif	/* _CONFIG_CMD_ALL_H */
Commit	Line	Data
ec63b10b JL	1	/*
	2	* Copyright 2007 Freescale Semiconductor, Inc.
	3	*
	4	* This file is licensed under the terms of the GNU General Public
	5	* License Version 2. This file is licensed "as is" without any
	6	* warranty of any kind, whether express or implied.
	7	*/
	8
	9	#ifndef _CONFIG_CMD_ALL_H
	10	#define _CONFIG_CMD_ALL_H
	11
	12	/*
	13	* Alphabetical list of all possible commands.
	14	*/
	15
	16	#define CONFIG_CMD_ASKENV /* ask for env variable */
	17	#define CONFIG_CMD_AUTOSCRIPT /* Autoscript Support */
	18	#define CONFIG_CMD_BDI /* bdinfo */
	19	#define CONFIG_CMD_BEDBUG /* Include BedBug Debugger */
	20	#define CONFIG_CMD_BMP /* BMP support */
	21	#define CONFIG_CMD_BOOTD /* bootd */
	22	#define CONFIG_CMD_BSP /* Board Specific functions */
	23	#define CONFIG_CMD_CACHE /* icache, dcache */
	24	#define CONFIG_CMD_CDP /* Cisco Discovery Protocol */
	25	#define CONFIG_CMD_CONSOLE /* coninfo */
	26	#define CONFIG_CMD_DATE /* support for RTC, date/time...*/
	27	#define CONFIG_CMD_DHCP /* DHCP Support */
	28	#define CONFIG_CMD_DIAG /* Diagnostics */
	29	#define CONFIG_CMD_DISPLAY /* Display support */
	30	#define CONFIG_CMD_DOC /* Disk-On-Chip Support */
	31	#define CONFIG_CMD_DTT /* Digital Therm and Thermostat */
	32	#define CONFIG_CMD_ECHO /* echo arguments */
	33	#define CONFIG_CMD_EEPROM /* EEPROM read/write support */
	34	#define CONFIG_CMD_ELF /* ELF (VxWorks) load/boot cmd */
	35	#define CONFIG_CMD_ENV /* saveenv */
	36	#define CONFIG_CMD_EXT2 /* EXT2 Support */
	37	#define CONFIG_CMD_FAT /* FAT support */
	38	#define CONFIG_CMD_FDC /* Floppy Disk Support */
	39	#define CONFIG_CMD_FDOS /* Floppy DOS support */
	40	#define CONFIG_CMD_FLASH /* flinfo, erase, protect */
	41	#define CONFIG_CMD_FPGA /* FPGA configuration Support */
	42	#define CONFIG_CMD_HWFLOW /* RTS/CTS hw flow control */
	43	#define CONFIG_CMD_I2C /* I2C serial bus support */
	44	#define CONFIG_CMD_IDE /* IDE harddisk support */
	45	#define CONFIG_CMD_IMI /* iminfo */
	46	#define CONFIG_CMD_IMLS /* List all found images */
	47	#define CONFIG_CMD_IMMAP /* IMMR dump support */
	48	#define CONFIG_CMD_IRQ /* irqinfo */
	49	#define CONFIG_CMD_ITEST /* Integer (and string) test */
	50	#define CONFIG_CMD_JFFS2 /* JFFS2 Support */
	51	#define CONFIG_CMD_KGDB /* kgdb */
	52	#define CONFIG_CMD_LOADB /* loadb */
	53	#define CONFIG_CMD_LOADS /* loads */
	54	#define CONFIG_CMD_MEMORY /* md mm nm mw cp cmp crc base loop mtest */
	55	#define CONFIG_CMD_MFSL /* FSL support for Microblaze */
	56	#define CONFIG_CMD_MII /* MII support */
	57	#define CONFIG_CMD_MISC /* Misc functions like sleep etc*/
	58	#define CONFIG_CMD_MMC /* MMC support */
	59	#define CONFIG_CMD_NAND /* NAND support */
	60	#define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */
	61	#define CONFIG_CMD_NFS /* NFS support */
	62	#define CONFIG_CMD_PCI /* pciinfo */
	63	#define CONFIG_CMD_PCMCIA /* PCMCIA support */
	64	#define CONFIG_CMD_PING /* ping support */
65	#define CONFIG_CMD_PORTIO /* Port I/O */
66	#define CONFIG_CMD_REGINFO /* Register dump */
67	#define CONFIG_CMD_REISER /* Reiserfs support */
68	#define CONFIG_CMD_RUN /* run command in env variable */
69	#define CONFIG_CMD_SAVES /* save S record dump */
70	#define CONFIG_CMD_SCSI /* SCSI Support */
71	#define CONFIG_CMD_SDRAM /* SDRAM DIMM SPD info printout */
72	#define CONFIG_CMD_SETGETDCR /* DCR support on 4xx */
73	#define CONFIG_CMD_SNTP /* SNTP support */
74	#define CONFIG_CMD_SPI /* SPI utility */
75	#define CONFIG_CMD_UNIVERSE /* Tundra Universe Support */
76	#define CONFIG_CMD_USB /* USB Support */
77	#define CONFIG_CMD_VFD /* VFD support (TRAB) */
78	#define CONFIG_CMD_XIMG /* Load part of Multi Image */
d4fc6012	79	#define CONFIG_CMD_MUX /* AT91 MMC/SPI Mux Support */
ec63b10b JL	80
ec63b10b JL	81	#endif /* _CONFIG_CMD_ALL_H */