[people/ms/u-boot.git] / include / configs / 3c120_devboard.h

/*
 * (C) Copyright 2005, Psyent Corporation <www.psyent.com>
 * Scott McNutt <smcnutt@psyent.com>
 * (C) Copyright 2010, Thomas Chou <thomas@wytron.com.tw>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/*
 * BOARD/CPU
 */
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO_LATE

/*
 * SERIAL
 */
#define CONFIG_BAUDRATE			115200
#define CONFIG_SYS_CONSOLE_INFO_QUIET	/* Suppress console info */

/*
 * CFI Flash
 */
#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_CFI_FLASH_STATUS_POLL /* fix amd flash issue */
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
#define CONFIG_SYS_FLASH_PROTECTION
#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT	1
#define CONFIG_SYS_MAX_FLASH_SECT	512

/*
 * NET options
 */
#define CONFIG_SYS_RX_ETH_BUFFER	0
#define CONFIG_CMD_MII
#define CONFIG_PHY_GIGE
#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
#define CONFIG_PHY_MARVELL

/*
 * BOOTP options
 */
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME

/*
 * FDT options
 */
#define CONFIG_LMB

/*
 * MEMORY ORGANIZATION
 * -Monitor at top of sdram.
 * -The heap is placed below the monitor
 * -The stack is placed below the heap (&grows down).
 */
#define CONFIG_SYS_SDRAM_BASE		0xD0000000
#define CONFIG_SYS_SDRAM_SIZE		0x08000000
#define CONFIG_NR_DRAM_BANKS		1
#define CONFIG_MONITOR_IS_IN_RAM
#define CONFIG_SYS_MONITOR_LEN		0x80000	/* Reserve 512k */
#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_SDRAM_BASE + \
					 CONFIG_SYS_SDRAM_SIZE - \
					 CONFIG_SYS_MONITOR_LEN)
#define CONFIG_SYS_MALLOC_LEN		0x20000

/*
 * ENVIRONMENT -- Put environment in sector CONFIG_SYS_MONITOR_LEN above
 * CONFIG_SYS_RESET_ADDR, since we assume the monitor is stored at the
 * reset address, no? This will keep the environment in user region
 * of flash. NOTE: the monitor length must be multiple of sector size
 * (which is common practice).
 */
#define CONFIG_ENV_IS_IN_FLASH

#define CONFIG_ENV_SIZE			0x20000	/* 128k, 1 sector */
#define CONFIG_ENV_OVERWRITE		/* Serial change Ok	*/
#define CONFIG_ENV_ADDR			(0xe2800000 + CONFIG_SYS_MONITOR_LEN)

/*
 * MISC
 */
#define CONFIG_SYS_LONGHELP		/* Provide extended help */
#define CONFIG_SYS_CBSIZE		256	/* Console I/O buf size */
#define CONFIG_SYS_MAXARGS		16	/* Max command args	*/
#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE /* Bootarg buf size */
#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
					sizeof(CONFIG_SYS_PROMPT) + \
					 16)	/* Print buf size */
#define CONFIG_SYS_LOAD_ADDR		0xd4000000	/* Half of RAM */
#define CONFIG_LOADADDR			CONFIG_SYS_LOAD_ADDR
#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MONITOR_BASE - \
					 CONFIG_ENV_SIZE - \
					 CONFIG_SYS_MALLOC_LEN -	\
					 0x10000)
#define CONFIG_VERSION_VARIABLE
#define CONFIG_AUTO_COMPLETE
#define CONFIG_CMDLINE_EDITING

#endif /* __CONFIG_H */
Commit	Line	Data
8cbb0ddd TC	1	/*
	2	* (C) Copyright 2005, Psyent Corporation <www.psyent.com>
	3	* Scott McNutt <smcnutt@psyent.com>
	4	* (C) Copyright 2010, Thomas Chou <thomas@wytron.com.tw>
	5	*
3765b3e7	6	* SPDX-License-Identifier: GPL-2.0+
8cbb0ddd TC	7	*/
	8
	9	#ifndef __CONFIG_H
	10	#define __CONFIG_H
	11
	12	/*
	13	* BOARD/CPU
	14	*/
5ff10aa7	15	#define CONFIG_DISPLAY_CPUINFO
ca844dd8	16	#define CONFIG_DISPLAY_BOARDINFO_LATE
8cbb0ddd TC	17
	18	/*
	19	* SERIAL
	20	*/
da2f838d	21	#define CONFIG_BAUDRATE 115200
8cbb0ddd TC	22	#define CONFIG_SYS_CONSOLE_INFO_QUIET /* Suppress console info */
8cbb0ddd TC	23
6168dc6a TC	24	/*
	25	* CFI Flash
	26	*/
6168dc6a TC	27	#define CONFIG_FLASH_CFI_DRIVER
	28	#define CONFIG_SYS_CFI_FLASH_STATUS_POLL /* fix amd flash issue */
	29	#define CONFIG_SYS_FLASH_CFI
	30	#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
	31	#define CONFIG_SYS_FLASH_PROTECTION
af54c18d	32	#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1
6168dc6a TC	33	#define CONFIG_SYS_MAX_FLASH_SECT 512
6168dc6a TC	34
96fa1e43	35	/*
c3c44954	36	* NET options
96fa1e43	37	*/
c3c44954	38	#define CONFIG_SYS_RX_ETH_BUFFER 0
e07eee39 TC	39	#define CONFIG_CMD_MII
	40	#define CONFIG_PHY_GIGE
	41	#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
	42	#define CONFIG_PHY_MARVELL
96fa1e43	43
8cbb0ddd TC	44	/*
	45	* BOOTP options
	46	*/
	47	#define CONFIG_BOOTP_BOOTFILESIZE
	48	#define CONFIG_BOOTP_BOOTPATH
	49	#define CONFIG_BOOTP_GATEWAY
	50	#define CONFIG_BOOTP_HOSTNAME
	51
	52	/*
ca1d80c0	53	* FDT options
8cbb0ddd	54	*/
857b9cb6 TC	55	#define CONFIG_LMB
857b9cb6 TC	56
8cbb0ddd TC	57	/*
8cbb0ddd TC	58	* MEMORY ORGANIZATION
7dfb0602 TC	59	* -Monitor at top of sdram.
	60	* -The heap is placed below the monitor
	61	* -The stack is placed below the heap (&grows down).
8cbb0ddd	62	*/
6168dc6a TC	63	#define CONFIG_SYS_SDRAM_BASE 0xD0000000
6168dc6a TC	64	#define CONFIG_SYS_SDRAM_SIZE 0x08000000
744b57b8	65	#define CONFIG_NR_DRAM_BANKS 1
8cbb0ddd	66	#define CONFIG_MONITOR_IS_IN_RAM
7ef051ec	67	#define CONFIG_SYS_MONITOR_LEN 0x80000 /* Reserve 512k */
8cbb0ddd TC	68	#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_SDRAM_BASE + \
	69	CONFIG_SYS_SDRAM_SIZE - \
	70	CONFIG_SYS_MONITOR_LEN)
2925e2b9	71	#define CONFIG_SYS_MALLOC_LEN 0x20000
8cbb0ddd	72
2aee06a2 MV	73	/*
	74	* ENVIRONMENT -- Put environment in sector CONFIG_SYS_MONITOR_LEN above
	75	* CONFIG_SYS_RESET_ADDR, since we assume the monitor is stored at the
	76	* reset address, no? This will keep the environment in user region
	77	* of flash. NOTE: the monitor length must be multiple of sector size
	78	* (which is common practice).
	79	*/
	80	#define CONFIG_ENV_IS_IN_FLASH
	81
	82	#define CONFIG_ENV_SIZE 0x20000 /* 128k, 1 sector */
	83	#define CONFIG_ENV_OVERWRITE /* Serial change Ok */
	84	#define CONFIG_ENV_ADDR (0xe2800000 + CONFIG_SYS_MONITOR_LEN)
	85
8cbb0ddd TC	86	/*
	87	* MISC
	88	*/
	89	#define CONFIG_SYS_LONGHELP /* Provide extended help */
8cbb0ddd TC	90	#define CONFIG_SYS_CBSIZE 256 /* Console I/O buf size */
	91	#define CONFIG_SYS_MAXARGS 16 /* Max command args */
	92	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Bootarg buf size */
	93	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
	94	sizeof(CONFIG_SYS_PROMPT) + \
	95	16) /* Print buf size */
bc3abe14 MV	96	#define CONFIG_SYS_LOAD_ADDR 0xd4000000 /* Half of RAM */
bc3abe14 MV	97	#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
8cbb0ddd	98	#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
540bb542 TC	99	#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MONITOR_BASE - \
	100	CONFIG_ENV_SIZE - \
	101	CONFIG_SYS_MALLOC_LEN - \
	102	0x10000)
aeea8754 MV	103	#define CONFIG_VERSION_VARIABLE
aeea8754 MV	104	#define CONFIG_AUTO_COMPLETE
8cbb0ddd TC	105	#define CONFIG_CMDLINE_EDITING
8cbb0ddd TC	106
8cbb0ddd	107	#endif /* __CONFIG_H */