projects / people / ms / u-boot.git / blame
| Commit | Line | Data |
|---|---|---|
| b5b06fb7 YS |
1 | /* |
| 2 | * Copyright 2011-2012 Freescale Semiconductor, Inc. | |
| 3 | * | |
| 1a459660 | 4 | * SPDX-License-Identifier: GPL-2.0+ |
| b5b06fb7 YS |
5 | */ |
| 6 | ||
| 7 | #ifndef __CONFIG_H | |
| 8 | #define __CONFIG_H | |
| 9 | ||
| 15672c6d YS |
10 | #define CONFIG_DISPLAY_BOARDINFO |
| 11 | ||
| b5b06fb7 YS |
12 | /* |
| 13 | * B4860 QDS board configuration file | |
| 14 | */ | |
| 15 | #define CONFIG_B4860QDS | |
| 16 | #define CONFIG_PHYS_64BIT | |
| 17 | ||
| 18 | #ifdef CONFIG_RAMBOOT_PBL | |
| c5dfe6ec PK |
19 | #define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/b4860qds/b4_pbi.cfg |
| 20 | #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/b4860qds/b4_rcw.cfg | |
| 21 | #ifndef CONFIG_NAND | |
| b5b06fb7 YS |
22 | #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE |
| 23 | #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc | |
| c5dfe6ec | 24 | #else |
| c5dfe6ec PK |
25 | #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT |
| 26 | #define CONFIG_SPL_ENV_SUPPORT | |
| 27 | #define CONFIG_SPL_SERIAL_SUPPORT | |
| 28 | #define CONFIG_SPL_FLUSH_IMAGE | |
| 29 | #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" | |
| 30 | #define CONFIG_SPL_LIBGENERIC_SUPPORT | |
| 31 | #define CONFIG_SPL_LIBCOMMON_SUPPORT | |
| 32 | #define CONFIG_SPL_I2C_SUPPORT | |
| 33 | #define CONFIG_SPL_DRIVERS_MISC_SUPPORT | |
| 34 | #define CONFIG_FSL_LAW /* Use common FSL init code */ | |
| 35 | #define CONFIG_SYS_TEXT_BASE 0x00201000 | |
| 36 | #define CONFIG_SPL_TEXT_BASE 0xFFFD8000 | |
| 37 | #define CONFIG_SPL_PAD_TO 0x40000 | |
| 38 | #define CONFIG_SPL_MAX_SIZE 0x28000 | |
| 39 | #define RESET_VECTOR_OFFSET 0x27FFC | |
| 40 | #define BOOT_PAGE_OFFSET 0x27000 | |
| 41 | #define CONFIG_SPL_NAND_SUPPORT | |
| 42 | #define CONFIG_SYS_NAND_U_BOOT_SIZE (768 << 10) | |
| 43 | #define CONFIG_SYS_NAND_U_BOOT_DST 0x00200000 | |
| 44 | #define CONFIG_SYS_NAND_U_BOOT_START 0x00200000 | |
| 45 | #define CONFIG_SYS_NAND_U_BOOT_OFFS (256 << 10) | |
| 46 | #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" | |
| 47 | #define CONFIG_SPL_NAND_BOOT | |
| 48 | #ifdef CONFIG_SPL_BUILD | |
| 49 | #define CONFIG_SPL_SKIP_RELOCATE | |
| 50 | #define CONFIG_SPL_COMMON_INIT_DDR | |
| 51 | #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE | |
| 52 | #define CONFIG_SYS_NO_FLASH | |
| 53 | #endif | |
| 54 | #endif | |
| b5b06fb7 YS |
55 | #endif |
| 56 | ||
| 5870fe44 LG |
57 | #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE |
| 58 | /* Set 1M boot space */ | |
| 59 | #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000) | |
| 60 | #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \ | |
| 61 | (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR) | |
| 62 | #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc | |
| 63 | #define CONFIG_SYS_NO_FLASH | |
| 64 | #endif | |
| 65 | ||
| b5b06fb7 YS |
66 | /* High Level Configuration Options */ |
| 67 | #define CONFIG_BOOKE | |
| b5b06fb7 YS |
68 | #define CONFIG_E500 /* BOOKE e500 family */ |
| 69 | #define CONFIG_E500MC /* BOOKE e500mc family */ | |
| 70 | #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ | |
| b5b06fb7 YS |
71 | #define CONFIG_MP /* support multiple processors */ |
| 72 | ||
| 73 | #ifndef CONFIG_SYS_TEXT_BASE | |
| e222b1f3 | 74 | #define CONFIG_SYS_TEXT_BASE 0xeff40000 |
| b5b06fb7 YS |
75 | #endif |
| 76 | ||
| 77 | #ifndef CONFIG_RESET_VECTOR_ADDRESS | |
| 78 | #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc | |
| 79 | #endif | |
| 80 | ||
| 81 | #define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ | |
| 82 | #define CONFIG_SYS_NUM_CPC CONFIG_NUM_DDR_CONTROLLERS | |
| 83 | #define CONFIG_FSL_IFC /* Enable IFC Support */ | |
| 737537ef | 84 | #define CONFIG_FSL_CAAM /* Enable SEC/CAAM */ |
| b5b06fb7 YS |
85 | #define CONFIG_PCI /* Enable PCI/PCIE */ |
| 86 | #define CONFIG_PCIE1 /* PCIE controler 1 */ | |
| 87 | #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ | |
| 88 | #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ | |
| 89 | ||
| 90 | #ifndef CONFIG_PPC_B4420 | |
| 91 | #define CONFIG_SYS_SRIO | |
| 92 | #define CONFIG_SRIO1 /* SRIO port 1 */ | |
| 93 | #define CONFIG_SRIO2 /* SRIO port 2 */ | |
| 3a01799b | 94 | #define CONFIG_SRIO_PCIE_BOOT_MASTER |
| b5b06fb7 YS |
95 | #endif |
| 96 | ||
| 97 | #define CONFIG_FSL_LAW /* Use common FSL init code */ | |
| 98 | ||
| 99 | /* I2C bus multiplexer */ | |
| 100 | #define I2C_MUX_PCA_ADDR 0x77 | |
| 101 | ||
| 102 | /* VSC Crossbar switches */ | |
| 103 | #define CONFIG_VSC_CROSSBAR | |
| 104 | #define I2C_CH_DEFAULT 0x8 | |
| 105 | #define I2C_CH_VSC3316 0xc | |
| 106 | #define I2C_CH_VSC3308 0xd | |
| 107 | ||
| 108 | #define VSC3316_TX_ADDRESS 0x70 | |
| 109 | #define VSC3316_RX_ADDRESS 0x71 | |
| 110 | #define VSC3308_TX_ADDRESS 0x02 | |
| 111 | #define VSC3308_RX_ADDRESS 0x03 | |
| 112 | ||
| cb033741 SL |
113 | /* IDT clock synthesizers */ |
| 114 | #define CONFIG_IDT8T49N222A | |
| 115 | #define I2C_CH_IDT 0x9 | |
| 116 | ||
| 117 | #define IDT_SERDES1_ADDRESS 0x6E | |
| 118 | #define IDT_SERDES2_ADDRESS 0x6C | |
| 119 | ||
| 652e29b4 SL |
120 | /* Voltage monitor on channel 2*/ |
| 121 | #define I2C_MUX_CH_VOL_MONITOR 0xa | |
| 122 | #define I2C_VOL_MONITOR_ADDR 0x40 | |
| 123 | #define I2C_VOL_MONITOR_BUS_V_OFFSET 0x2 | |
| 124 | #define I2C_VOL_MONITOR_BUS_V_OVF 0x1 | |
| 125 | #define I2C_VOL_MONITOR_BUS_V_SHIFT 3 | |
| 126 | ||
| 127 | #define CONFIG_ZM7300 | |
| 128 | #define I2C_MUX_CH_DPM 0xa | |
| 129 | #define I2C_DPM_ADDR 0x28 | |
| 130 | ||
| b5b06fb7 YS |
131 | #define CONFIG_ENV_OVERWRITE |
| 132 | ||
| 133 | #ifdef CONFIG_SYS_NO_FLASH | |
| 5870fe44 | 134 | #if !defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) && !defined(CONFIG_RAMBOOT_PBL) |
| b5b06fb7 | 135 | #define CONFIG_ENV_IS_NOWHERE |
| 5870fe44 | 136 | #endif |
| b5b06fb7 YS |
137 | #else |
| 138 | #define CONFIG_FLASH_CFI_DRIVER | |
| 139 | #define CONFIG_SYS_FLASH_CFI | |
| 140 | #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE | |
| 141 | #endif | |
| 142 | ||
| b5b06fb7 YS |
143 | #if defined(CONFIG_SPIFLASH) |
| 144 | #define CONFIG_SYS_EXTRA_ENV_RELOC | |
| 145 | #define CONFIG_ENV_IS_IN_SPI_FLASH | |
| 146 | #define CONFIG_ENV_SPI_BUS 0 | |
| 147 | #define CONFIG_ENV_SPI_CS 0 | |
| 148 | #define CONFIG_ENV_SPI_MAX_HZ 10000000 | |
| 149 | #define CONFIG_ENV_SPI_MODE 0 | |
| 150 | #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ | |
| 151 | #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ | |
| 152 | #define CONFIG_ENV_SECT_SIZE 0x10000 | |
| 153 | #elif defined(CONFIG_SDCARD) | |
| 154 | #define CONFIG_SYS_EXTRA_ENV_RELOC | |
| 155 | #define CONFIG_ENV_IS_IN_MMC | |
| 156 | #define CONFIG_SYS_MMC_ENV_DEV 0 | |
| 157 | #define CONFIG_ENV_SIZE 0x2000 | |
| 158 | #define CONFIG_ENV_OFFSET (512 * 1097) | |
| 159 | #elif defined(CONFIG_NAND) | |
| 160 | #define CONFIG_SYS_EXTRA_ENV_RELOC | |
| 161 | #define CONFIG_ENV_IS_IN_NAND | |
| c5dfe6ec PK |
162 | #define CONFIG_ENV_SIZE 0x2000 |
| 163 | #define CONFIG_ENV_OFFSET (10 * CONFIG_SYS_NAND_BLOCK_SIZE) | |
| 5870fe44 LG |
164 | #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) |
| 165 | #define CONFIG_ENV_IS_IN_REMOTE | |
| 166 | #define CONFIG_ENV_ADDR 0xffe20000 | |
| 167 | #define CONFIG_ENV_SIZE 0x2000 | |
| 168 | #elif defined(CONFIG_ENV_IS_NOWHERE) | |
| 169 | #define CONFIG_ENV_SIZE 0x2000 | |
| b5b06fb7 YS |
170 | #else |
| 171 | #define CONFIG_ENV_IS_IN_FLASH | |
| 172 | #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) | |
| 173 | #define CONFIG_ENV_SIZE 0x2000 | |
| 174 | #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ | |
| 175 | #endif | |
| b5b06fb7 YS |
176 | |
| 177 | #ifndef __ASSEMBLY__ | |
| 178 | unsigned long get_board_sys_clk(void); | |
| 179 | unsigned long get_board_ddr_clk(void); | |
| 180 | #endif | |
| 181 | #define CONFIG_SYS_CLK_FREQ get_board_sys_clk() /* sysclk for MPC85xx */ | |
| 182 | #define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() | |
| 183 | ||
| 184 | /* | |
| 185 | * These can be toggled for performance analysis, otherwise use default. | |
| 186 | */ | |
| 187 | #define CONFIG_SYS_CACHE_STASHING | |
| 188 | #define CONFIG_BTB /* toggle branch predition */ | |
| 189 | #define CONFIG_DDR_ECC | |
| 190 | #ifdef CONFIG_DDR_ECC | |
| 191 | #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER | |
| 192 | #define CONFIG_MEM_INIT_VALUE 0xdeadbeef | |
| 193 | #endif | |
| 194 | ||
| 195 | #define CONFIG_ENABLE_36BIT_PHYS | |
| 196 | ||
| 197 | #ifdef CONFIG_PHYS_64BIT | |
| 198 | #define CONFIG_ADDR_MAP | |
| 199 | #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ | |
| 200 | #endif | |
| 201 | ||
| 202 | #if 0 | |
| 203 | #define CONFIG_POST CONFIG_SYS_POST_MEMORY /* test POST memory test */ | |
| 204 | #endif | |
| 205 | #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ | |
| 206 | #define CONFIG_SYS_MEMTEST_END 0x00400000 | |
| 207 | #define CONFIG_SYS_ALT_MEMTEST | |
| 208 | #define CONFIG_PANIC_HANG /* do not reset board on panic */ | |
| 209 | ||
| 210 | /* | |
| 211 | * Config the L3 Cache as L3 SRAM | |
| 212 | */ | |
| c5dfe6ec PK |
213 | #define CONFIG_SYS_INIT_L3_ADDR 0xFFFC0000 |
| 214 | #define CONFIG_SYS_L3_SIZE 256 << 10 | |
| 215 | #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024) | |
| 216 | #ifdef CONFIG_NAND | |
| 217 | #define CONFIG_ENV_ADDR (CONFIG_SPL_GD_ADDR + 4 * 1024) | |
| 218 | #endif | |
| 219 | #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SPL_GD_ADDR + 12 * 1024) | |
| 220 | #define CONFIG_SPL_RELOC_MALLOC_SIZE (30 << 10) | |
| 221 | #define CONFIG_SPL_RELOC_STACK (CONFIG_SPL_GD_ADDR + 64 * 1024) | |
| 222 | #define CONFIG_SPL_RELOC_STACK_SIZE (22 << 10) | |
| b5b06fb7 YS |
223 | |
| 224 | #ifdef CONFIG_PHYS_64BIT | |
| 225 | #define CONFIG_SYS_DCSRBAR 0xf0000000 | |
| 226 | #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull | |
| 227 | #endif | |
| 228 | ||
| 229 | /* EEPROM */ | |
| 1de271b4 | 230 | #define CONFIG_ID_EEPROM |
| b5b06fb7 YS |
231 | #define CONFIG_SYS_I2C_EEPROM_NXID |
| 232 | #define CONFIG_SYS_EEPROM_BUS_NUM 0 | |
| 233 | #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 | |
| 234 | #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 | |
| 235 | #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 | |
| 236 | #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 | |
| 237 | ||
| 238 | /* | |
| 239 | * DDR Setup | |
| 240 | */ | |
| 241 | #define CONFIG_VERY_BIG_RAM | |
| 242 | #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 | |
| 243 | #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE | |
| 244 | ||
| 245 | /* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */ | |
| 246 | #define CONFIG_DIMM_SLOTS_PER_CTLR 1 | |
| 247 | #define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR) | |
| 248 | ||
| 249 | #define CONFIG_DDR_SPD | |
| 250 | #define CONFIG_SYS_DDR_RAW_TIMING | |
| 5614e71b | 251 | #define CONFIG_SYS_FSL_DDR3 |
| c5dfe6ec | 252 | #ifndef CONFIG_SPL_BUILD |
| b5b06fb7 | 253 | #define CONFIG_FSL_DDR_INTERACTIVE |
| c5dfe6ec | 254 | #endif |
| b5b06fb7 YS |
255 | |
| 256 | #define CONFIG_SYS_SPD_BUS_NUM 0 | |
| 257 | #define SPD_EEPROM_ADDRESS1 0x51 | |
| 258 | #define SPD_EEPROM_ADDRESS2 0x53 | |
| 259 | ||
| 260 | #define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 | |
| 261 | #define CONFIG_SYS_SDRAM_SIZE 2048 /* for fixed parameter use */ | |
| 262 | ||
| 263 | /* | |
| 264 | * IFC Definitions | |
| 265 | */ | |
| 266 | #define CONFIG_SYS_FLASH_BASE 0xe0000000 | |
| 267 | #ifdef CONFIG_PHYS_64BIT | |
| 268 | #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) | |
| 269 | #else | |
| 270 | #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE | |
| 271 | #endif | |
| 272 | ||
| 273 | #define CONFIG_SYS_NOR0_CSPR_EXT (0xf) | |
| 274 | #define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \ | |
| 275 | + 0x8000000) | \ | |
| 276 | CSPR_PORT_SIZE_16 | \ | |
| 277 | CSPR_MSEL_NOR | \ | |
| 278 | CSPR_V) | |
| 279 | #define CONFIG_SYS_NOR1_CSPR_EXT (0xf) | |
| 280 | #define CONFIG_SYS_NOR1_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ | |
| 281 | CSPR_PORT_SIZE_16 | \ | |
| 282 | CSPR_MSEL_NOR | \ | |
| 283 | CSPR_V) | |
| 284 | #define CONFIG_SYS_NOR_AMASK IFC_AMASK(128 * 1024 * 1024) | |
| 285 | /* NOR Flash Timing Params */ | |
| 286 | #define CONFIG_SYS_NOR_CSOR CSOR_NOR_ADM_SHIFT(4) | |
| 287 | #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x01) | \ | |
| 4d0e6e0d | 288 | FTIM0_NOR_TEADC(0x04) | \ |
| b5b06fb7 YS |
289 | FTIM0_NOR_TEAHC(0x20)) |
| 290 | #define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ | |
| 291 | FTIM1_NOR_TRAD_NOR(0x1A) |\ | |
| 292 | FTIM1_NOR_TSEQRAD_NOR(0x13)) | |
| 293 | #define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x01) | \ | |
| 294 | FTIM2_NOR_TCH(0x0E) | \ | |
| 295 | FTIM2_NOR_TWPH(0x0E) | \ | |
| 296 | FTIM2_NOR_TWP(0x1c)) | |
| 297 | #define CONFIG_SYS_NOR_FTIM3 0x0 | |
| 298 | ||
| 299 | #define CONFIG_SYS_FLASH_QUIET_TEST | |
| 300 | #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ | |
| 301 | ||
| 302 | #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ | |
| 303 | #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ | |
| 304 | #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ | |
| 305 | #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ | |
| 306 | ||
| 307 | #define CONFIG_SYS_FLASH_EMPTY_INFO | |
| 308 | #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS \ | |
| 309 | + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS} | |
| 310 | ||
| 311 | #define CONFIG_FSL_QIXIS /* use common QIXIS code */ | |
| 312 | #define CONFIG_FSL_QIXIS_V2 | |
| 313 | #define QIXIS_BASE 0xffdf0000 | |
| 314 | #ifdef CONFIG_PHYS_64BIT | |
| 315 | #define QIXIS_BASE_PHYS (0xf00000000ull | QIXIS_BASE) | |
| 316 | #else | |
| 317 | #define QIXIS_BASE_PHYS QIXIS_BASE | |
| 318 | #endif | |
| 319 | #define QIXIS_LBMAP_SWITCH 0x01 | |
| 320 | #define QIXIS_LBMAP_MASK 0x0f | |
| 321 | #define QIXIS_LBMAP_SHIFT 0 | |
| 322 | #define QIXIS_LBMAP_DFLTBANK 0x00 | |
| 323 | #define QIXIS_LBMAP_ALTBANK 0x02 | |
| 324 | #define QIXIS_RST_CTL_RESET 0x31 | |
| 325 | #define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20 | |
| 326 | #define QIXIS_RCFG_CTL_RECONFIG_START 0x21 | |
| 327 | #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 | |
| 328 | ||
| 329 | #define CONFIG_SYS_CSPR3_EXT (0xf) | |
| 330 | #define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \ | |
| 331 | | CSPR_PORT_SIZE_8 \ | |
| 332 | | CSPR_MSEL_GPCM \ | |
| 333 | | CSPR_V) | |
| 334 | #define CONFIG_SYS_AMASK3 IFC_AMASK(4 * 1024) | |
| 335 | #define CONFIG_SYS_CSOR3 0x0 | |
| 336 | /* QIXIS Timing parameters for IFC CS3 */ | |
| 337 | #define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ | |
| 338 | FTIM0_GPCM_TEADC(0x0e) | \ | |
| 339 | FTIM0_GPCM_TEAHC(0x0e)) | |
| 340 | #define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \ | |
| 341 | FTIM1_GPCM_TRAD(0x1f)) | |
| 342 | #define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ | |
| de519163 | 343 | FTIM2_GPCM_TCH(0x8) | \ |
| b5b06fb7 YS |
344 | FTIM2_GPCM_TWP(0x1f)) |
| 345 | #define CONFIG_SYS_CS3_FTIM3 0x0 | |
| 346 | ||
| 347 | /* NAND Flash on IFC */ | |
| 348 | #define CONFIG_NAND_FSL_IFC | |
| ab13ad58 YS |
349 | #define CONFIG_SYS_NAND_MAX_ECCPOS 256 |
| 350 | #define CONFIG_SYS_NAND_MAX_OOBFREE 2 | |
| b5b06fb7 YS |
351 | #define CONFIG_SYS_NAND_BASE 0xff800000 |
| 352 | #ifdef CONFIG_PHYS_64BIT | |
| 353 | #define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE) | |
| 354 | #else | |
| 355 | #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE | |
| 356 | #endif | |
| 357 | ||
| 358 | #define CONFIG_SYS_NAND_CSPR_EXT (0xf) | |
| 359 | #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ | |
| 360 | | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ | |
| 361 | | CSPR_MSEL_NAND /* MSEL = NAND */ \ | |
| 362 | | CSPR_V) | |
| 363 | #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64 * 1024) | |
| 364 | ||
| 365 | #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ | |
| 366 | | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ | |
| 367 | | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ | |
| 368 | | CSOR_NAND_RAL_3 /* RAL = 2Byes */ \ | |
| 369 | | CSOR_NAND_PGS_2K /* Page Size = 2K */ \ | |
| 370 | | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \ | |
| 371 | | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ | |
| 372 | ||
| 373 | #define CONFIG_SYS_NAND_ONFI_DETECTION | |
| 374 | ||
| 375 | /* ONFI NAND Flash mode0 Timing Params */ | |
| 376 | #define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \ | |
| 377 | FTIM0_NAND_TWP(0x18) | \ | |
| 378 | FTIM0_NAND_TWCHT(0x07) | \ | |
| 379 | FTIM0_NAND_TWH(0x0a)) | |
| 380 | #define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ | |
| 381 | FTIM1_NAND_TWBE(0x39) | \ | |
| 382 | FTIM1_NAND_TRR(0x0e) | \ | |
| 383 | FTIM1_NAND_TRP(0x18)) | |
| 384 | #define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ | |
| 385 | FTIM2_NAND_TREH(0x0a) | \ | |
| 386 | FTIM2_NAND_TWHRE(0x1e)) | |
| 387 | #define CONFIG_SYS_NAND_FTIM3 0x0 | |
| 388 | ||
| 389 | #define CONFIG_SYS_NAND_DDR_LAW 11 | |
| 390 | ||
| 391 | #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } | |
| 392 | #define CONFIG_SYS_MAX_NAND_DEVICE 1 | |
| b5b06fb7 YS |
393 | #define CONFIG_CMD_NAND |
| 394 | ||
| 395 | #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) | |
| 396 | ||
| 397 | #if defined(CONFIG_NAND) | |
| 398 | #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT | |
| 399 | #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR | |
| 400 | #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK | |
| 401 | #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR | |
| 402 | #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 | |
| 403 | #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 | |
| 404 | #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 | |
| 405 | #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 | |
| 406 | #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR0_CSPR_EXT | |
| 407 | #define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR0_CSPR | |
| 408 | #define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK | |
| 409 | #define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR | |
| 410 | #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0 | |
| 411 | #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1 | |
| 412 | #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2 | |
| 413 | #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3 | |
| 414 | #else | |
| 415 | #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT | |
| 416 | #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR | |
| 417 | #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK | |
| 418 | #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR | |
| 419 | #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 | |
| 420 | #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 | |
| 421 | #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 | |
| 422 | #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 | |
| 423 | #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NAND_CSPR_EXT | |
| 424 | #define CONFIG_SYS_CSPR2 CONFIG_SYS_NAND_CSPR | |
| 425 | #define CONFIG_SYS_AMASK2 CONFIG_SYS_NAND_AMASK | |
| 426 | #define CONFIG_SYS_CSOR2 CONFIG_SYS_NAND_CSOR | |
| 427 | #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NAND_FTIM0 | |
| 428 | #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NAND_FTIM1 | |
| 429 | #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NAND_FTIM2 | |
| 430 | #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NAND_FTIM3 | |
| 431 | #endif | |
| 432 | #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR1_CSPR_EXT | |
| 433 | #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR1_CSPR | |
| 434 | #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK | |
| 435 | #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR | |
| 436 | #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 | |
| 437 | #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 | |
| 438 | #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 | |
| 439 | #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 | |
| 440 | ||
| c5dfe6ec PK |
441 | #ifdef CONFIG_SPL_BUILD |
| 442 | #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE | |
| 443 | #else | |
| 444 | #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ | |
| 445 | #endif | |
| b5b06fb7 YS |
446 | |
| 447 | #if defined(CONFIG_RAMBOOT_PBL) | |
| 448 | #define CONFIG_SYS_RAMBOOT | |
| 449 | #endif | |
| 450 | ||
| 451 | #define CONFIG_BOARD_EARLY_INIT_R | |
| 452 | #define CONFIG_MISC_INIT_R | |
| 453 | ||
| 454 | #define CONFIG_HWCONFIG | |
| 455 | ||
| 456 | /* define to use L1 as initial stack */ | |
| 457 | #define CONFIG_L1_INIT_RAM | |
| 458 | #define CONFIG_SYS_INIT_RAM_LOCK | |
| 459 | #define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ | |
| 460 | #ifdef CONFIG_PHYS_64BIT | |
| 461 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf | |
| b3142e2c | 462 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe03c000 |
| b5b06fb7 YS |
463 | /* The assembler doesn't like typecast */ |
| 464 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ | |
| 465 | ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ | |
| 466 | CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) | |
| 467 | #else | |
| b3142e2c | 468 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS 0xfe03c000 /* Initial L1 address */ |
| b5b06fb7 YS |
469 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 |
| 470 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS | |
| 471 | #endif | |
| 472 | #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 | |
| 473 | ||
| 474 | #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ | |
| 475 | GENERATED_GBL_DATA_SIZE) | |
| 476 | #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET | |
| 477 | ||
| 9307cbab | 478 | #define CONFIG_SYS_MONITOR_LEN (768 * 1024) |
| b5b06fb7 YS |
479 | #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) |
| 480 | ||
| 481 | /* Serial Port - controlled on board with jumper J8 | |
| 482 | * open - index 2 | |
| 483 | * shorted - index 1 | |
| 484 | */ | |
| 485 | #define CONFIG_CONS_INDEX 1 | |
| b5b06fb7 YS |
486 | #define CONFIG_SYS_NS16550_SERIAL |
| 487 | #define CONFIG_SYS_NS16550_REG_SIZE 1 | |
| 488 | #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) | |
| 489 | ||
| 490 | #define CONFIG_SYS_BAUDRATE_TABLE \ | |
| 491 | {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} | |
| 492 | ||
| 493 | #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) | |
| 494 | #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) | |
| 495 | #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) | |
| 496 | #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) | |
| c5dfe6ec | 497 | #ifndef CONFIG_SPL_BUILD |
| b5b06fb7 | 498 | #define CONFIG_SYS_CONSOLE_IS_IN_ENV /* determine from environment */ |
| c5dfe6ec | 499 | #endif |
| b5b06fb7 YS |
500 | |
| 501 | ||
| 502 | /* Use the HUSH parser */ | |
| 503 | #define CONFIG_SYS_HUSH_PARSER | |
| 504 | #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " | |
| 505 | ||
| b5b06fb7 | 506 | /* I2C */ |
| 00f792e0 HS |
507 | #define CONFIG_SYS_I2C |
| 508 | #define CONFIG_SYS_I2C_FSL /* Use FSL common I2C driver */ | |
| 509 | #define CONFIG_SYS_FSL_I2C_SPEED 400000 /* I2C speed in Hz */ | |
| 510 | #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F | |
| 511 | #define CONFIG_SYS_FSL_I2C2_SPEED 400000 /* I2C speed in Hz */ | |
| 512 | #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F | |
| 513 | #define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 | |
| 514 | #define CONFIG_SYS_FSL_I2C2_OFFSET 0x119000 | |
| b5b06fb7 YS |
515 | |
| 516 | /* | |
| 517 | * RTC configuration | |
| 518 | */ | |
| 519 | #define RTC | |
| 520 | #define CONFIG_RTC_DS3231 1 | |
| 521 | #define CONFIG_SYS_I2C_RTC_ADDR 0x68 | |
| 522 | ||
| 523 | /* | |
| 524 | * RapidIO | |
| 525 | */ | |
| 526 | #ifdef CONFIG_SYS_SRIO | |
| 527 | #ifdef CONFIG_SRIO1 | |
| 528 | #define CONFIG_SYS_SRIO1_MEM_VIRT 0xa0000000 | |
| 529 | #ifdef CONFIG_PHYS_64BIT | |
| 530 | #define CONFIG_SYS_SRIO1_MEM_PHYS 0xc20000000ull | |
| 531 | #else | |
| 532 | #define CONFIG_SYS_SRIO1_MEM_PHYS 0xa0000000 | |
| 533 | #endif | |
| 534 | #define CONFIG_SYS_SRIO1_MEM_SIZE 0x10000000 /* 256M */ | |
| 535 | #endif | |
| 536 | ||
| 537 | #ifdef CONFIG_SRIO2 | |
| 538 | #define CONFIG_SYS_SRIO2_MEM_VIRT 0xb0000000 | |
| 539 | #ifdef CONFIG_PHYS_64BIT | |
| 540 | #define CONFIG_SYS_SRIO2_MEM_PHYS 0xc30000000ull | |
| 541 | #else | |
| 542 | #define CONFIG_SYS_SRIO2_MEM_PHYS 0xb0000000 | |
| 543 | #endif | |
| 544 | #define CONFIG_SYS_SRIO2_MEM_SIZE 0x10000000 /* 256M */ | |
| 545 | #endif | |
| 546 | #endif | |
| 547 | ||
| 548 | /* | |
| 549 | * for slave u-boot IMAGE instored in master memory space, | |
| 550 | * PHYS must be aligned based on the SIZE | |
| 551 | */ | |
| e4911815 LG |
552 | #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull |
| 553 | #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull | |
| 554 | #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000 /* 1M */ | |
| 555 | #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull | |
| b5b06fb7 YS |
556 | /* |
| 557 | * for slave UCODE and ENV instored in master memory space, | |
| 558 | * PHYS must be aligned based on the SIZE | |
| 559 | */ | |
| e4911815 | 560 | #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull |
| b5b06fb7 YS |
561 | #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull |
| 562 | #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000 /* 256K */ | |
| 563 | ||
| 564 | /* slave core release by master*/ | |
| 565 | #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4 | |
| 566 | #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */ | |
| 567 | ||
| 568 | /* | |
| 569 | * SRIO_PCIE_BOOT - SLAVE | |
| 570 | */ | |
| 571 | #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE | |
| 572 | #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000 | |
| 573 | #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \ | |
| 574 | (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR) | |
| 575 | #endif | |
| 576 | ||
| 577 | /* | |
| 578 | * eSPI - Enhanced SPI | |
| 579 | */ | |
| b5b06fb7 YS |
580 | #define CONFIG_CMD_SF |
| 581 | #define CONFIG_SF_DEFAULT_SPEED 10000000 | |
| 582 | #define CONFIG_SF_DEFAULT_MODE 0 | |
| 583 | ||
| 6eaeba23 SL |
584 | /* |
| 585 | * MAPLE | |
| 586 | */ | |
| 587 | #ifdef CONFIG_PHYS_64BIT | |
| 588 | #define CONFIG_SYS_MAPLE_MEM_PHYS 0xFA0000000ull | |
| 589 | #else | |
| 590 | #define CONFIG_SYS_MAPLE_MEM_PHYS 0xA0000000 | |
| 591 | #endif | |
| 592 | ||
| b5b06fb7 YS |
593 | /* |
| 594 | * General PCI | |
| 595 | * Memory space is mapped 1-1, but I/O space must start from 0. | |
| 596 | */ | |
| 597 | ||
| 598 | /* controller 1, direct to uli, tgtid 3, Base address 20000 */ | |
| 599 | #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 | |
| 600 | #ifdef CONFIG_PHYS_64BIT | |
| 601 | #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 | |
| 602 | #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull | |
| 603 | #else | |
| 604 | #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 | |
| 605 | #define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 | |
| 606 | #endif | |
| 607 | #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ | |
| 608 | #define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 | |
| 609 | #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 | |
| 610 | #ifdef CONFIG_PHYS_64BIT | |
| 611 | #define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull | |
| 612 | #else | |
| 613 | #define CONFIG_SYS_PCIE1_IO_PHYS 0xf8000000 | |
| 614 | #endif | |
| 615 | #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ | |
| 616 | ||
| 617 | /* Qman/Bman */ | |
| 618 | #ifndef CONFIG_NOBQFMAN | |
| 619 | #define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ | |
| 620 | #define CONFIG_SYS_BMAN_NUM_PORTALS 25 | |
| 621 | #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 | |
| 622 | #ifdef CONFIG_PHYS_64BIT | |
| 623 | #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull | |
| 624 | #else | |
| 625 | #define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE | |
| 626 | #endif | |
| 627 | #define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 | |
| 3fa66db4 JL |
628 | #define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000 |
| 629 | #define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 | |
| 630 | #define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE | |
| 631 | #define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) | |
| 632 | #define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ | |
| 633 | CONFIG_SYS_BMAN_CENA_SIZE) | |
| 634 | #define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) | |
| 635 | #define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 | |
| b5b06fb7 YS |
636 | #define CONFIG_SYS_QMAN_NUM_PORTALS 25 |
| 637 | #define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 | |
| 638 | #ifdef CONFIG_PHYS_64BIT | |
| 639 | #define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull | |
| 640 | #else | |
| 641 | #define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE | |
| 642 | #endif | |
| 643 | #define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 | |
| 3fa66db4 JL |
644 | #define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000 |
| 645 | #define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 | |
| 646 | #define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE | |
| 647 | #define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) | |
| 648 | #define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ | |
| 649 | CONFIG_SYS_QMAN_CENA_SIZE) | |
| 650 | #define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) | |
| 651 | #define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 | |
| b5b06fb7 YS |
652 | |
| 653 | #define CONFIG_SYS_DPAA_FMAN | |
| 654 | ||
| 0795eff3 ML |
655 | #define CONFIG_SYS_DPAA_RMAN |
| 656 | ||
| b5b06fb7 YS |
657 | /* Default address of microcode for the Linux Fman driver */ |
| 658 | #if defined(CONFIG_SPIFLASH) | |
| 659 | /* | |
| 660 | * env is stored at 0x100000, sector size is 0x10000, ucode is stored after | |
| 661 | * env, so we got 0x110000. | |
| 662 | */ | |
| 663 | #define CONFIG_SYS_QE_FW_IN_SPIFLASH | |
| dcf1d774 | 664 | #define CONFIG_SYS_FMAN_FW_ADDR 0x110000 |
| b5b06fb7 YS |
665 | #elif defined(CONFIG_SDCARD) |
| 666 | /* | |
| 667 | * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is | |
| 668 | * about 545KB (1089 blocks), Env is stored after the image, and the env size is | |
| 669 | * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130. | |
| 670 | */ | |
| 671 | #define CONFIG_SYS_QE_FMAN_FW_IN_MMC | |
| dcf1d774 | 672 | #define CONFIG_SYS_FMAN_FW_ADDR (512 * 1130) |
| b5b06fb7 YS |
673 | #elif defined(CONFIG_NAND) |
| 674 | #define CONFIG_SYS_QE_FMAN_FW_IN_NAND | |
| c5dfe6ec | 675 | #define CONFIG_SYS_FMAN_FW_ADDR (13 * CONFIG_SYS_NAND_BLOCK_SIZE) |
| 5870fe44 LG |
676 | #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) |
| 677 | /* | |
| 678 | * Slave has no ucode locally, it can fetch this from remote. When implementing | |
| 679 | * in two corenet boards, slave's ucode could be stored in master's memory | |
| 680 | * space, the address can be mapped from slave TLB->slave LAW-> | |
| 681 | * slave SRIO or PCIE outbound window->master inbound window-> | |
| 682 | * master LAW->the ucode address in master's memory space. | |
| 683 | */ | |
| 684 | #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE | |
| dcf1d774 | 685 | #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000 |
| b5b06fb7 YS |
686 | #else |
| 687 | #define CONFIG_SYS_QE_FMAN_FW_IN_NOR | |
| dcf1d774 | 688 | #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 |
| b5b06fb7 YS |
689 | #endif |
| 690 | #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 | |
| 691 | #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) | |
| 692 | #endif /* CONFIG_NOBQFMAN */ | |
| 693 | ||
| 694 | #ifdef CONFIG_SYS_DPAA_FMAN | |
| 695 | #define CONFIG_FMAN_ENET | |
| 696 | #define CONFIG_PHYLIB_10G | |
| 697 | #define CONFIG_PHY_VITESSE | |
| 698 | #define CONFIG_PHY_TERANETICS | |
| 699 | #define SGMII_CARD_PORT1_PHY_ADDR 0x1C | |
| 700 | #define SGMII_CARD_PORT2_PHY_ADDR 0x10 | |
| 701 | #define SGMII_CARD_PORT3_PHY_ADDR 0x1E | |
| 702 | #define SGMII_CARD_PORT4_PHY_ADDR 0x11 | |
| 703 | #endif | |
| 704 | ||
| 705 | #ifdef CONFIG_PCI | |
| 842033e6 | 706 | #define CONFIG_PCI_INDIRECT_BRIDGE |
| b5b06fb7 | 707 | #define CONFIG_PCI_PNP /* do pci plug-and-play */ |
| b5b06fb7 YS |
708 | |
| 709 | #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ | |
| 710 | #define CONFIG_DOS_PARTITION | |
| 711 | #endif /* CONFIG_PCI */ | |
| 712 | ||
| 713 | #ifdef CONFIG_FMAN_ENET | |
| f1d8074c SL |
714 | #define CONFIG_SYS_FM1_ONBOARD_PHY1_ADDR 0x10 |
| 715 | #define CONFIG_SYS_FM1_ONBOARD_PHY2_ADDR 0x11 | |
| 16d88f41 SG |
716 | |
| 717 | /*B4860 QDS AMC2PEX-2S default PHY_ADDR */ | |
| 718 | #define CONFIG_SYS_FM1_10GEC1_PHY_ADDR 0x7 /*SLOT 1*/ | |
| 719 | #define CONFIG_SYS_FM1_10GEC2_PHY_ADDR 0x6 /*SLOT 2*/ | |
| 720 | ||
| b5b06fb7 YS |
721 | |
| 722 | #define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR 0x1c | |
| 723 | #define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR 0x1d | |
| 724 | #define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR 0x1e | |
| 725 | #define CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR 0x1f | |
| 726 | ||
| 727 | #define CONFIG_MII /* MII PHY management */ | |
| 728 | #define CONFIG_ETHPRIME "FM1@DTSEC1" | |
| 729 | #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ | |
| 730 | #endif | |
| 731 | ||
| b24f6d40 SX |
732 | #define CONFIG_SYS_FSL_B4860QDS_XFI_ERR |
| 733 | ||
| b5b06fb7 YS |
734 | /* |
| 735 | * Environment | |
| 736 | */ | |
| 737 | #define CONFIG_LOADS_ECHO /* echo on for serial download */ | |
| 738 | #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ | |
| 739 | ||
| 740 | /* | |
| 741 | * Command line configuration. | |
| 742 | */ | |
| b5b06fb7 YS |
743 | #define CONFIG_CMD_DATE |
| 744 | #define CONFIG_CMD_DHCP | |
| 745 | #define CONFIG_CMD_EEPROM | |
| b5b06fb7 YS |
746 | #define CONFIG_CMD_ERRATA |
| 747 | #define CONFIG_CMD_GREPENV | |
| 748 | #define CONFIG_CMD_IRQ | |
| 749 | #define CONFIG_CMD_I2C | |
| 750 | #define CONFIG_CMD_MII | |
| 751 | #define CONFIG_CMD_PING | |
| 752 | #define CONFIG_CMD_REGINFO | |
| b5b06fb7 YS |
753 | |
| 754 | #ifdef CONFIG_PCI | |
| 755 | #define CONFIG_CMD_PCI | |
| b5b06fb7 YS |
756 | #endif |
| 757 | ||
| 737537ef RG |
758 | /* Hash command with SHA acceleration supported in hardware */ |
| 759 | #ifdef CONFIG_FSL_CAAM | |
| 760 | #define CONFIG_CMD_HASH | |
| 761 | #define CONFIG_SHA_HW_ACCEL | |
| 762 | #endif | |
| 763 | ||
| b5b06fb7 YS |
764 | /* |
| 765 | * USB | |
| 766 | */ | |
| 767 | #define CONFIG_HAS_FSL_DR_USB | |
| 768 | ||
| 769 | #ifdef CONFIG_HAS_FSL_DR_USB | |
| 770 | #define CONFIG_USB_EHCI | |
| 771 | ||
| 772 | #ifdef CONFIG_USB_EHCI | |
| 773 | #define CONFIG_CMD_USB | |
| 774 | #define CONFIG_USB_STORAGE | |
| 775 | #define CONFIG_USB_EHCI_FSL | |
| 776 | #define CONFIG_EHCI_HCD_INIT_AFTER_RESET | |
| 777 | #define CONFIG_CMD_EXT2 | |
| 778 | #endif | |
| 779 | #endif | |
| 780 | ||
| 781 | /* | |
| 782 | * Miscellaneous configurable options | |
| 783 | */ | |
| 784 | #define CONFIG_SYS_LONGHELP /* undef to save memory */ | |
| 785 | #define CONFIG_CMDLINE_EDITING /* Command-line editing */ | |
| 786 | #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ | |
| 787 | #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ | |
| b5b06fb7 YS |
788 | #ifdef CONFIG_CMD_KGDB |
| 789 | #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ | |
| 790 | #else | |
| 791 | #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ | |
| 792 | #endif | |
| 793 | #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) | |
| 794 | #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ | |
| 795 | #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ | |
| b5b06fb7 YS |
796 | |
| 797 | /* | |
| 798 | * For booting Linux, the board info and command line data | |
| 799 | * have to be in the first 64 MB of memory, since this is | |
| 800 | * the maximum mapped by the Linux kernel during initialization. | |
| 801 | */ | |
| 802 | #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ | |
| 803 | #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ | |
| 804 | ||
| 805 | #ifdef CONFIG_CMD_KGDB | |
| 806 | #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ | |
| b5b06fb7 YS |
807 | #endif |
| 808 | ||
| 809 | /* | |
| 810 | * Environment Configuration | |
| 811 | */ | |
| 812 | #define CONFIG_ROOTPATH "/opt/nfsroot" | |
| 813 | #define CONFIG_BOOTFILE "uImage" | |
| 814 | #define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server*/ | |
| 815 | ||
| 816 | /* default location for tftp and bootm */ | |
| 817 | #define CONFIG_LOADADDR 1000000 | |
| 818 | ||
| 819 | #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ | |
| 820 | ||
| 821 | #define CONFIG_BAUDRATE 115200 | |
| 822 | ||
| 823 | #define __USB_PHY_TYPE ulpi | |
| 824 | ||
| 38e0e153 SL |
825 | #ifdef CONFIG_PPC_B4860 |
| 826 | #define HWCONFIG "hwconfig=fsl_ddr:ctlr_intlv=null," \ | |
| 827 | "bank_intlv=cs0_cs1;" \ | |
| 828 | "en_cpc:cpc2;" | |
| 829 | #else | |
| 830 | #define HWCONFIG "hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=cs0_cs1;" | |
| 831 | #endif | |
| 832 | ||
| b5b06fb7 | 833 | #define CONFIG_EXTRA_ENV_SETTINGS \ |
| 38e0e153 | 834 | HWCONFIG \ |
| b5b06fb7 YS |
835 | "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ |
| 836 | "netdev=eth0\0" \ | |
| 837 | "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ | |
| 838 | "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ | |
| 839 | "tftpflash=tftpboot $loadaddr $uboot && " \ | |
| 840 | "protect off $ubootaddr +$filesize && " \ | |
| 841 | "erase $ubootaddr +$filesize && " \ | |
| 842 | "cp.b $loadaddr $ubootaddr $filesize && " \ | |
| 843 | "protect on $ubootaddr +$filesize && " \ | |
| 844 | "cmp.b $loadaddr $ubootaddr $filesize\0" \ | |
| 845 | "consoledev=ttyS0\0" \ | |
| 846 | "ramdiskaddr=2000000\0" \ | |
| 847 | "ramdiskfile=b4860qds/ramdisk.uboot\0" \ | |
| 848 | "fdtaddr=c00000\0" \ | |
| 849 | "fdtfile=b4860qds/b4860qds.dtb\0" \ | |
| 3246584d | 850 | "bdev=sda3\0" |
| b5b06fb7 YS |
851 | |
| 852 | /* For emulation this causes u-boot to jump to the start of the proof point | |
| 853 | app code automatically */ | |
| 854 | #define CONFIG_PROOF_POINTS \ | |
| 855 | "setenv bootargs root=/dev/$bdev rw " \ | |
| 856 | "console=$consoledev,$baudrate $othbootargs;" \ | |
| 857 | "cpu 1 release 0x29000000 - - -;" \ | |
| 858 | "cpu 2 release 0x29000000 - - -;" \ | |
| 859 | "cpu 3 release 0x29000000 - - -;" \ | |
| 860 | "cpu 4 release 0x29000000 - - -;" \ | |
| 861 | "cpu 5 release 0x29000000 - - -;" \ | |
| 862 | "cpu 6 release 0x29000000 - - -;" \ | |
| 863 | "cpu 7 release 0x29000000 - - -;" \ | |
| 864 | "go 0x29000000" | |
| 865 | ||
| 866 | #define CONFIG_HVBOOT \ | |
| 867 | "setenv bootargs config-addr=0x60000000; " \ | |
| 868 | "bootm 0x01000000 - 0x00f00000" | |
| 869 | ||
| 870 | #define CONFIG_ALU \ | |
| 871 | "setenv bootargs root=/dev/$bdev rw " \ | |
| 872 | "console=$consoledev,$baudrate $othbootargs;" \ | |
| 873 | "cpu 1 release 0x01000000 - - -;" \ | |
| 874 | "cpu 2 release 0x01000000 - - -;" \ | |
| 875 | "cpu 3 release 0x01000000 - - -;" \ | |
| 876 | "cpu 4 release 0x01000000 - - -;" \ | |
| 877 | "cpu 5 release 0x01000000 - - -;" \ | |
| 878 | "cpu 6 release 0x01000000 - - -;" \ | |
| 879 | "cpu 7 release 0x01000000 - - -;" \ | |
| 880 | "go 0x01000000" | |
| 881 | ||
| 882 | #define CONFIG_LINUX \ | |
| 883 | "setenv bootargs root=/dev/ram rw " \ | |
| 884 | "console=$consoledev,$baudrate $othbootargs;" \ | |
| 885 | "setenv ramdiskaddr 0x02000000;" \ | |
| 886 | "setenv fdtaddr 0x00c00000;" \ | |
| 887 | "setenv loadaddr 0x1000000;" \ | |
| 888 | "bootm $loadaddr $ramdiskaddr $fdtaddr" | |
| 889 | ||
| 890 | #define CONFIG_HDBOOT \ | |
| 891 | "setenv bootargs root=/dev/$bdev rw " \ | |
| 892 | "console=$consoledev,$baudrate $othbootargs;" \ | |
| 893 | "tftp $loadaddr $bootfile;" \ | |
| 894 | "tftp $fdtaddr $fdtfile;" \ | |
| 895 | "bootm $loadaddr - $fdtaddr" | |
| 896 | ||
| 897 | #define CONFIG_NFSBOOTCOMMAND \ | |
| 898 | "setenv bootargs root=/dev/nfs rw " \ | |
| 899 | "nfsroot=$serverip:$rootpath " \ | |
| 900 | "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ | |
| 901 | "console=$consoledev,$baudrate $othbootargs;" \ | |
| 902 | "tftp $loadaddr $bootfile;" \ | |
| 903 | "tftp $fdtaddr $fdtfile;" \ | |
| 904 | "bootm $loadaddr - $fdtaddr" | |
| 905 | ||
| 906 | #define CONFIG_RAMBOOTCOMMAND \ | |
| 907 | "setenv bootargs root=/dev/ram rw " \ | |
| 908 | "console=$consoledev,$baudrate $othbootargs;" \ | |
| 909 | "tftp $ramdiskaddr $ramdiskfile;" \ | |
| 910 | "tftp $loadaddr $bootfile;" \ | |
| 911 | "tftp $fdtaddr $fdtfile;" \ | |
| 912 | "bootm $loadaddr $ramdiskaddr $fdtaddr" | |
| 913 | ||
| 914 | #define CONFIG_BOOTCOMMAND CONFIG_LINUX | |
| 915 | ||
| b5b06fb7 | 916 | #include <asm/fsl_secure_boot.h> |
| b5b06fb7 YS |
917 | |
| 918 | #endif /* __CONFIG_H */ |