[people/ms/u-boot.git] / include / configs / BSC9131RDB.h

/*
 * Copyright 2011-2012 Freescale Semiconductor, Inc.
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

/*
 * BSC9131 RDB board configuration file
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#ifdef CONFIG_BSC9131RDB
#define CONFIG_BSC9131
#define CONFIG_NAND_FSL_IFC
#endif

#ifdef CONFIG_SPIFLASH
#define CONFIG_RAMBOOT_SPIFLASH
#define CONFIG_SYS_RAMBOOT
#define CONFIG_SYS_EXTRA_ENV_RELOC
#define CONFIG_SYS_TEXT_BASE		0x11000000
#define CONFIG_RESET_VECTOR_ADDRESS	0x1107fffc
#endif

#ifdef CONFIG_NAND
#define CONFIG_SPL
#define CONFIG_SPL_INIT_MINIMAL
#define CONFIG_SPL_SERIAL_SUPPORT
#define CONFIG_SPL_NAND_SUPPORT
#define CONFIG_SPL_NAND_MINIMAL
#define CONFIG_SPL_FLUSH_IMAGE
#define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"

#define CONFIG_SYS_TEXT_BASE		0x00201000
#define CONFIG_SPL_TEXT_BASE		0xFFFFE000
#define CONFIG_SPL_MAX_SIZE		8192
#define CONFIG_SPL_RELOC_TEXT_BASE	0x00100000
#define CONFIG_SPL_RELOC_STACK		0x00100000
#define CONFIG_SYS_NAND_U_BOOT_SIZE	((512 << 10) - 0x2000)
#define CONFIG_SYS_NAND_U_BOOT_DST	(0x00200000 - CONFIG_SPL_MAX_SIZE)
#define CONFIG_SYS_NAND_U_BOOT_START	0x00200000
#define CONFIG_SYS_NAND_U_BOOT_OFFS	0
#define CONFIG_SYS_LDSCRIPT	"arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
#endif

#ifdef CONFIG_SPL_BUILD
#define CONFIG_SYS_MONITOR_BASE	CONFIG_SPL_TEXT_BASE
#else
#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE	/* start of monitor */
#endif


/* High Level Configuration Options */
#define CONFIG_BOOKE			/* BOOKE */
#define CONFIG_E500			/* BOOKE e500 family */
#define CONFIG_MPC85xx		/* MPC8540/60/55/41/48/P1020/P2020/P1010,etc*/
#define CONFIG_FSL_IFC			/* Enable IFC Support */

#define CONFIG_FSL_LAW			/* Use common FSL init code */
#define CONFIG_TSEC_ENET
#define CONFIG_ENV_OVERWRITE

#define CONFIG_DDR_CLK_FREQ	66666666 /* DDRCLK on 9131 RDB */
#if defined(CONFIG_SYS_CLK_100)
#define CONFIG_SYS_CLK_FREQ    100000000 /* SYSCLK for 9131 RDB */
#else
#define CONFIG_SYS_CLK_FREQ	66666666 /* SYSCLK for 9131 RDB */
#endif

#define CONFIG_HWCONFIG
/*
 * These can be toggled for performance analysis, otherwise use default.
 */
#define CONFIG_L2_CACHE			/* toggle L2 cache */
#define CONFIG_BTB			/* enable branch predition */

#define CONFIG_SYS_MEMTEST_START	0x01000000	/* memtest works on */
#define CONFIG_SYS_MEMTEST_END		0x01ffffff

/* DDR Setup */
#define CONFIG_FSL_DDR3
#undef CONFIG_SYS_DDR_RAW_TIMING
#undef CONFIG_DDR_SPD
#define CONFIG_SYS_SPD_BUS_NUM		0
#define SPD_EEPROM_ADDRESS		0x52 /* I2C access */

#define CONFIG_MEM_INIT_VALUE		0xDeadBeef

#ifndef __ASSEMBLY__
extern unsigned long get_sdram_size(void);
#endif
#define CONFIG_SYS_SDRAM_SIZE		get_sdram_size() /* DDR size */
#define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000
#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE

#define CONFIG_NUM_DDR_CONTROLLERS	1
#define CONFIG_DIMM_SLOTS_PER_CTLR	1
#define CONFIG_CHIP_SELECTS_PER_CTRL	1

#define CONFIG_SYS_DDR_CS0_BNDS		0x0000003f
#define CONFIG_SYS_DDR_CS0_CONFIG	0x80014302
#define CONFIG_SYS_DDR_CS0_CONFIG_2	0x00000000

#define CONFIG_SYS_DDR_DATA_INIT	0xdeadbeef
#define CONFIG_SYS_DDR_INIT_ADDR	0x00000000
#define CONFIG_SYS_DDR_INIT_EXT_ADDR	0x00000000
#define CONFIG_SYS_DDR_MODE_CONTROL	0x00000000

#define CONFIG_SYS_DDR_ZQ_CONTROL	0x89080600
#define CONFIG_SYS_DDR_SR_CNTR		0x00000000
#define CONFIG_SYS_DDR_RCW_1		0x00000000
#define CONFIG_SYS_DDR_RCW_2		0x00000000
#define CONFIG_SYS_DDR_CONTROL		0xC70C0000	/* Type = DDR3	*/
#define CONFIG_SYS_DDR_CONTROL_2	0x24401000
#define CONFIG_SYS_DDR_TIMING_4		0x00000001
#define CONFIG_SYS_DDR_TIMING_5		0x02401400

#define CONFIG_SYS_DDR_TIMING_3_800		0x00030000
#define CONFIG_SYS_DDR_TIMING_0_800		0x00110104
#define CONFIG_SYS_DDR_TIMING_1_800		0x6f6b8644
#define CONFIG_SYS_DDR_TIMING_2_800		0x0fa888cf
#define CONFIG_SYS_DDR_CLK_CTRL_800		0x03000000
#define CONFIG_SYS_DDR_MODE_1_800		0x00441420
#define CONFIG_SYS_DDR_MODE_2_800		0x8000c000
#define CONFIG_SYS_DDR_INTERVAL_800		0x0c300100
#define CONFIG_SYS_DDR_WRLVL_CONTROL_800	0x8675f608

/*
 * Base addresses -- Note these are effective addresses where the
 * actual resources get mapped (not physical addresses)
 */
/* relocated CCSRBAR */
#define CONFIG_SYS_CCSRBAR	CONFIG_SYS_CCSRBAR_DEFAULT
#define CONFIG_SYS_CCSRBAR_PHYS_LOW	CONFIG_SYS_CCSRBAR_DEFAULT

#define CONFIG_SYS_IMMR		CONFIG_SYS_CCSRBAR	/* PQII uses */
							/* CONFIG_SYS_IMMR */
/* DSP CCSRBAR */
#define CONFIG_SYS_FSL_DSP_CCSRBAR	CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT
#define CONFIG_SYS_FSL_DSP_CCSRBAR_PHYS	CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT

/*
 * Memory map
 *
 * 0x0000_0000	0x3FFF_FFFF	DDR			1G cacheable
 * 0x8800_0000	0x8810_0000	IFC internal SRAM		1M
 * 0xB000_0000	0xB0FF_FFFF	DSP core M2 memory	16M
 * 0xC100_0000	0xC13F_FFFF	MAPLE-2F		4M
 * 0xC1F0_0000	0xC1F3_FFFF	PA L2 SRAM Region 0	256K
 * 0xC1F8_0000	0xC1F9_FFFF	PA L2 SRAM Region 1	128K
 * 0xFED0_0000	0xFED0_3FFF	SEC Secured RAM		16K
 * 0xFF60_0000	0xFF6F_FFFF	DSP CCSR		1M
 * 0xFF70_0000	0xFF7F_FFFF	PA CCSR			1M
 * 0xFF80_0000	0xFFFF_FFFF	Boot Page & NAND flash buffer	8M
 *
 */

/*
 * IFC Definitions
 */
#define CONFIG_SYS_NO_FLASH

/* NAND Flash on IFC */
#define CONFIG_SYS_NAND_BASE		0xff800000
#define CONFIG_SYS_NAND_BASE_PHYS	CONFIG_SYS_NAND_BASE

#define CONFIG_SYS_NAND_CSPR	(CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
				| CSPR_PORT_SIZE_8	/* Port Size = 8 bit*/ \
				| CSPR_MSEL_NAND	/* MSEL = NAND */ \
				| CSPR_V)
#define CONFIG_SYS_NAND_AMASK	IFC_AMASK(64*1024)

#define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
				| CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
				| CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
				| CSOR_NAND_RAL_2	/* RAL = 2Byes */ \
				| CSOR_NAND_PGS_2K	/* Page Size = 2K */ \
				| CSOR_NAND_SPRZ_64	/* Spare size = 64 */ \
				| CSOR_NAND_PB(64))	/*Pages Per Block = 64*/

/* NAND Flash Timing Params */
#define CONFIG_SYS_NAND_FTIM0		(FTIM0_NAND_TCCST(0x08)  \
					| FTIM0_NAND_TWP(0x06)   \
					| FTIM0_NAND_TWCHT(0x03) \
					| FTIM0_NAND_TWH(0x04))
#define CONFIG_SYS_NAND_FTIM1		(FTIM1_NAND_TADLE(0x18) \
					| FTIM1_NAND_TWBE(0x23) \
					| FTIM1_NAND_TRR(0x08)  \
					| FTIM1_NAND_TRP(0x05))
#define CONFIG_SYS_NAND_FTIM2		(FTIM2_NAND_TRAD(0x08)  \
					| FTIM2_NAND_TREH(0x04) \
					| FTIM2_NAND_TWHRE(0x3f))
#define CONFIG_SYS_NAND_FTIM3		FTIM3_NAND_TWW(0x22)

#define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
#define CONFIG_SYS_MAX_NAND_DEVICE	1
#define CONFIG_MTD_NAND_VERIFY_WRITE
#define CONFIG_CMD_NAND
#define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)

#define CONFIG_SYS_NAND_DDR_LAW		11

/* Set up IFC registers for boot location NAND */
#define CONFIG_SYS_CSPR0		CONFIG_SYS_NAND_CSPR
#define CONFIG_SYS_AMASK0		CONFIG_SYS_NAND_AMASK
#define CONFIG_SYS_CSOR0		CONFIG_SYS_NAND_CSOR
#define CONFIG_SYS_CS0_FTIM0		CONFIG_SYS_NAND_FTIM0
#define CONFIG_SYS_CS0_FTIM1		CONFIG_SYS_NAND_FTIM1
#define CONFIG_SYS_CS0_FTIM2		CONFIG_SYS_NAND_FTIM2
#define CONFIG_SYS_CS0_FTIM3		CONFIG_SYS_NAND_FTIM3

#define CONFIG_BOARD_EARLY_INIT_F	/* Call board_pre_init */

#define CONFIG_SYS_INIT_RAM_LOCK
#define CONFIG_SYS_INIT_RAM_ADDR	0xffd00000	/* stack in RAM */
#define CONFIG_SYS_INIT_RAM_END		0x00004000/* End of used area in RAM */

#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END \
						- GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET

#define CONFIG_SYS_MONITOR_LEN		(256 * 1024) /* Reserve 256 kB for Mon*/
#define CONFIG_SYS_MALLOC_LEN		(1024 * 1024)	/* Reserved for malloc*/

/* Serial Port */
#define CONFIG_CONS_INDEX	1
#undef	CONFIG_SERIAL_SOFTWARE_FIFO
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE	1
#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
#ifdef CONFIG_SPL_BUILD
#define CONFIG_NS16550_MIN_FUNCTIONS
#endif

#define CONFIG_SYS_CONSOLE_IS_IN_ENV	/* determine from environment */

#define CONFIG_SYS_BAUDRATE_TABLE	\
	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}

#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CCSRBAR+0x4500)

/* Use the HUSH parser */
#define CONFIG_SYS_HUSH_PARSER
#ifdef	CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
#endif

/*
 * Pass open firmware flat tree
 */
#define CONFIG_OF_LIBFDT
#define CONFIG_OF_BOARD_SETUP
#define CONFIG_OF_STDOUT_VIA_ALIAS

/* new uImage format support */
#define CONFIG_FIT
#define CONFIG_FIT_VERBOSE	/* enable fit_format_{error,warning}() */

#define CONFIG_FSL_I2C			/* Use FSL common I2C driver */
#define CONFIG_HARD_I2C			/* I2C with hardware support */
#define CONFIG_I2C_MULTI_BUS
#define CONFIG_I2C_CMD_TREE
#define CONFIG_SYS_I2C_SPEED		400000 /* I2C speed and slave address*/
#define CONFIG_SYS_I2C_OFFSET		0x3000

/* I2C EEPROM */
#define CONFIG_CMD_EEPROM
#define CONFIG_SYS_I2C_MULTI_EEPROMS
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5

#define CONFIG_CMD_I2C


#define CONFIG_FSL_ESPI
/* eSPI - Enhanced SPI */
#ifdef CONFIG_FSL_ESPI
#define CONFIG_SPI_FLASH
#define CONFIG_SPI_FLASH_SPANSION
#define CONFIG_CMD_SF
#define CONFIG_SF_DEFAULT_SPEED		10000000
#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
#endif

#if defined(CONFIG_TSEC_ENET)

#define CONFIG_MII			/* MII PHY management */
#define CONFIG_MII_DEFAULT_TSEC	1	/* Allow unregistered phys */
#define CONFIG_TSEC1	1
#define CONFIG_TSEC1_NAME	"eTSEC1"
#define CONFIG_TSEC2	1
#define CONFIG_TSEC2_NAME	"eTSEC2"

#define TSEC1_PHY_ADDR		0
#define TSEC2_PHY_ADDR		3

#define TSEC1_FLAGS		(TSEC_GIGABIT | TSEC_REDUCED)
#define TSEC2_FLAGS		(TSEC_GIGABIT | TSEC_REDUCED)

#define TSEC1_PHYIDX		0

#define TSEC2_PHYIDX		0

#define CONFIG_ETHPRIME		"eTSEC1"

#define CONFIG_PHY_GIGE		/* Include GbE speed/duplex detection */

#endif	/* CONFIG_TSEC_ENET */

/*
 * Environment
 */
#if defined(CONFIG_RAMBOOT_SPIFLASH)
#define CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_ENV_SPI_BUS	0
#define CONFIG_ENV_SPI_CS	0
#define CONFIG_ENV_SPI_MAX_HZ	10000000
#define CONFIG_ENV_SPI_MODE	0
#define CONFIG_ENV_OFFSET	0x100000	/* 1MB */
#define CONFIG_ENV_SECT_SIZE	0x10000
#define CONFIG_ENV_SIZE		0x2000
#elif defined(CONFIG_NAND)
#define CONFIG_ENV_IS_IN_NAND
#define CONFIG_SYS_EXTRA_ENV_RELOC
#define CONFIG_ENV_SIZE		CONFIG_SYS_NAND_BLOCK_SIZE
#define CONFIG_ENV_OFFSET	((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE)
#define CONFIG_ENV_RANGE	(3 * CONFIG_ENV_SIZE)
#elif defined(CONFIG_SYS_RAMBOOT)
#define CONFIG_ENV_IS_NOWHERE	/* Store ENV in memory only */
#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - 0x1000)
#define CONFIG_ENV_SIZE		0x2000
#endif

#define CONFIG_LOADS_ECHO		/* echo on for serial download */
#define CONFIG_SYS_LOADS_BAUD_CHANGE		/* allow baudrate change */

/*
 * Command line configuration.
 */
#include <config_cmd_default.h>

#define CONFIG_CMD_DHCP
#define CONFIG_CMD_ERRATA
#define CONFIG_CMD_ELF
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_FAT
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_MII
#define CONFIG_DOS_PARTITION
#define CONFIG_CMD_PING
#define CONFIG_CMD_REGINFO
#define CONFIG_CMD_SETEXPR

/*
 * Miscellaneous configurable options
 */
#define CONFIG_SYS_LONGHELP			/* undef to save memory	*/
#define CONFIG_CMDLINE_EDITING			/* Command-line editing */
#define CONFIG_AUTO_COMPLETE			/* add autocompletion support */
#define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt */

#if defined(CONFIG_CMD_KGDB)
#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size */
#else
#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size */
#endif
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
						/* Print Buffer Size */
#define CONFIG_SYS_MAXARGS	16		/* max number of command args */
#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
#define CONFIG_SYS_HZ		1000	/* decrementer freq: 1ms ticks */

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 64 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization.
 */
#define CONFIG_SYS_BOOTMAPSZ	(64 << 20) /* Initial Memory map for Linux */
#define CONFIG_SYS_BOOTM_LEN	(64 << 20) /* Increase max gunzip size */

#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
#endif

#define CONFIG_USB_EHCI

#ifdef CONFIG_USB_EHCI
#define CONFIG_CMD_USB
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
#define CONFIG_USB_EHCI_FSL
#define CONFIG_USB_STORAGE
#define CONFIG_HAS_FSL_DR_USB
#endif

/*
 * Environment Configuration
 */

#if defined(CONFIG_TSEC_ENET)
#define CONFIG_HAS_ETH0
#endif

#define CONFIG_HOSTNAME		BSC9131rdb
#define CONFIG_ROOTPATH		"/opt/nfsroot"
#define CONFIG_BOOTFILE		"uImage"
#define CONFIG_UBOOTPATH	"u-boot.bin" /* U-Boot image on TFTP server */

#define CONFIG_BAUDRATE		115200

#define	CONFIG_EXTRA_ENV_SETTINGS				\
	"netdev=eth0\0"						\
	"uboot=" CONFIG_UBOOTPATH "\0"				\
	"loadaddr=1000000\0"			\
	"bootfile=uImage\0"	\
	"consoledev=ttyS0\0"				\
	"ramdiskaddr=2000000\0"			\
	"ramdiskfile=rootfs.ext2.gz.uboot\0"		\
	"fdtaddr=c00000\0"				\
	"fdtfile=bsc9131rdb.dtb\0"		\
	"bdev=sda1\0"	\
	"hwconfig=usb1:dr_mode=host,phy_type=ulpi\0"	\
	"bootm_size=0x37000000\0"	\
	"othbootargs=ramdisk_size=600000 " \
	"default_hugepagesz=256m hugepagesz=256m hugepages=1\0" \
	"usbext2boot=setenv bootargs root=/dev/ram rw "	\
	"console=$consoledev,$baudrate $othbootargs; "	\
	"usb start;"			\
	"ext2load usb 0:4 $loadaddr $bootfile;"		\
	"ext2load usb 0:4 $fdtaddr $fdtfile;"	\
	"ext2load usb 0:4 $ramdiskaddr $ramdiskfile;"	\
	"bootm $loadaddr $ramdiskaddr $fdtaddr\0"	\

#define CONFIG_RAMBOOTCOMMAND		\
	"setenv bootargs root=/dev/ram rw "	\
	"console=$consoledev,$baudrate $othbootargs; "	\
	"tftp $ramdiskaddr $ramdiskfile;"	\
	"tftp $loadaddr $bootfile;"		\
	"tftp $fdtaddr $fdtfile;"		\
	"bootm $loadaddr $ramdiskaddr $fdtaddr"

#define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND

#endif	/* __CONFIG_H */
Commit	Line	Data
7530d341 PK	1	/*
	2	* Copyright 2011-2012 Freescale Semiconductor, Inc.
	3	*
	4	* See file CREDITS for list of people who contributed to this
	5	* project.
	6	*
	7	* This program is free software; you can redistribute it and/or
	8	* modify it under the terms of the GNU General Public License as
	9	* published by the Free Software Foundation; either version 2 of
	10	* the License, or (at your option) any later version.
	11	*
	12	* This program is distributed in the hope that it will be useful,
	13	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	14	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
	15	* GNU General Public License for more details.
	16	*
	17	* You should have received a copy of the GNU General Public License
	18	* along with this program; if not, write to the Free Software
	19	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	20	* MA 02111-1307 USA
	21	*/
	22
	23	/*
	24	* BSC9131 RDB board configuration file
	25	*/
	26
	27	#ifndef __CONFIG_H
	28	#define __CONFIG_H
	29
	30	#ifdef CONFIG_BSC9131RDB
	31	#define CONFIG_BSC9131
	32	#define CONFIG_NAND_FSL_IFC
	33	#endif
	34
	35	#ifdef CONFIG_SPIFLASH
	36	#define CONFIG_RAMBOOT_SPIFLASH
	37	#define CONFIG_SYS_RAMBOOT
	38	#define CONFIG_SYS_EXTRA_ENV_RELOC
	39	#define CONFIG_SYS_TEXT_BASE 0x11000000
	40	#define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc
	41	#endif
	42
f1593269 PK	43	#ifdef CONFIG_NAND
	44	#define CONFIG_SPL
	45	#define CONFIG_SPL_INIT_MINIMAL
	46	#define CONFIG_SPL_SERIAL_SUPPORT
	47	#define CONFIG_SPL_NAND_SUPPORT
	48	#define CONFIG_SPL_NAND_MINIMAL
	49	#define CONFIG_SPL_FLUSH_IMAGE
	50	#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
	51
	52	#define CONFIG_SYS_TEXT_BASE 0x00201000
	53	#define CONFIG_SPL_TEXT_BASE 0xFFFFE000
	54	#define CONFIG_SPL_MAX_SIZE 8192
	55	#define CONFIG_SPL_RELOC_TEXT_BASE 0x00100000
	56	#define CONFIG_SPL_RELOC_STACK 0x00100000
	57	#define CONFIG_SYS_NAND_U_BOOT_SIZE ((512 << 10) - 0x2000)
	58	#define CONFIG_SYS_NAND_U_BOOT_DST (0x00200000 - CONFIG_SPL_MAX_SIZE)
	59	#define CONFIG_SYS_NAND_U_BOOT_START 0x00200000
	60	#define CONFIG_SYS_NAND_U_BOOT_OFFS 0
	61	#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
7530d341 PK	62	#endif
7530d341 PK	63
f1593269 PK	64	#ifdef CONFIG_SPL_BUILD
	65	#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
	66	#else
	67	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
	68	#endif
	69
	70
7530d341 PK	71	/* High Level Configuration Options */
	72	#define CONFIG_BOOKE /* BOOKE */
	73	#define CONFIG_E500 /* BOOKE e500 family */
	74	#define CONFIG_MPC85xx /* MPC8540/60/55/41/48/P1020/P2020/P1010,etc*/
	75	#define CONFIG_FSL_IFC /* Enable IFC Support */
	76
	77	#define CONFIG_FSL_LAW /* Use common FSL init code */
	78	#define CONFIG_TSEC_ENET
	79	#define CONFIG_ENV_OVERWRITE
	80
	81	#define CONFIG_DDR_CLK_FREQ 66666666 /* DDRCLK on 9131 RDB */
087cf44f PJ	82	#if defined(CONFIG_SYS_CLK_100)
	83	#define CONFIG_SYS_CLK_FREQ 100000000 /* SYSCLK for 9131 RDB */
	84	#else
7530d341	85	#define CONFIG_SYS_CLK_FREQ 66666666 /* SYSCLK for 9131 RDB */
087cf44f	86	#endif
7530d341 PK	87
	88	#define CONFIG_HWCONFIG
	89	/*
	90	* These can be toggled for performance analysis, otherwise use default.
	91	*/
	92	#define CONFIG_L2_CACHE /* toggle L2 cache */
	93	#define CONFIG_BTB /* enable branch predition */
	94
	95	#define CONFIG_SYS_MEMTEST_START 0x01000000 /* memtest works on */
	96	#define CONFIG_SYS_MEMTEST_END 0x01ffffff
	97
	98	/* DDR Setup */
	99	#define CONFIG_FSL_DDR3
	100	#undef CONFIG_SYS_DDR_RAW_TIMING
	101	#undef CONFIG_DDR_SPD
	102	#define CONFIG_SYS_SPD_BUS_NUM 0
	103	#define SPD_EEPROM_ADDRESS 0x52 /* I2C access */
	104
	105	#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
	106
	107	#ifndef __ASSEMBLY__
	108	extern unsigned long get_sdram_size(void);
	109	#endif
	110	#define CONFIG_SYS_SDRAM_SIZE get_sdram_size() /* DDR size */
	111	#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000
	112	#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
	113
	114	#define CONFIG_NUM_DDR_CONTROLLERS 1
	115	#define CONFIG_DIMM_SLOTS_PER_CTLR 1
	116	#define CONFIG_CHIP_SELECTS_PER_CTRL 1
	117
	118	#define CONFIG_SYS_DDR_CS0_BNDS 0x0000003f
	119	#define CONFIG_SYS_DDR_CS0_CONFIG 0x80014302
	120	#define CONFIG_SYS_DDR_CS0_CONFIG_2 0x00000000
	121
	122	#define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef
	123	#define CONFIG_SYS_DDR_INIT_ADDR 0x00000000
	124	#define CONFIG_SYS_DDR_INIT_EXT_ADDR 0x00000000
	125	#define CONFIG_SYS_DDR_MODE_CONTROL 0x00000000
	126
	127	#define CONFIG_SYS_DDR_ZQ_CONTROL 0x89080600
	128	#define CONFIG_SYS_DDR_SR_CNTR 0x00000000
	129	#define CONFIG_SYS_DDR_RCW_1 0x00000000
	130	#define CONFIG_SYS_DDR_RCW_2 0x00000000
	131	#define CONFIG_SYS_DDR_CONTROL 0xC70C0000 /* Type = DDR3 */
	132	#define CONFIG_SYS_DDR_CONTROL_2 0x24401000
	133	#define CONFIG_SYS_DDR_TIMING_4 0x00000001
	134	#define CONFIG_SYS_DDR_TIMING_5 0x02401400
	135
	136	#define CONFIG_SYS_DDR_TIMING_3_800 0x00030000
	137	#define CONFIG_SYS_DDR_TIMING_0_800 0x00110104
	138	#define CONFIG_SYS_DDR_TIMING_1_800 0x6f6b8644
	139	#define CONFIG_SYS_DDR_TIMING_2_800 0x0fa888cf
	140	#define CONFIG_SYS_DDR_CLK_CTRL_800 0x03000000
	141	#define CONFIG_SYS_DDR_MODE_1_800 0x00441420
	142	#define CONFIG_SYS_DDR_MODE_2_800 0x8000c000
	143	#define CONFIG_SYS_DDR_INTERVAL_800 0x0c300100
	144	#define CONFIG_SYS_DDR_WRLVL_CONTROL_800 0x8675f608
	145
	146	/*
	147	* Base addresses -- Note these are effective addresses where the
	148	* actual resources get mapped (not physical addresses)
	149	*/
	150	/* relocated CCSRBAR */
151	#define CONFIG_SYS_CCSRBAR CONFIG_SYS_CCSRBAR_DEFAULT
152	#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR_DEFAULT
153
154	#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses */
155	/* CONFIG_SYS_IMMR */
765b0bdb PJ	156	/* DSP CCSRBAR */
	157	#define CONFIG_SYS_FSL_DSP_CCSRBAR CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT
	158	#define CONFIG_SYS_FSL_DSP_CCSRBAR_PHYS CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT
7530d341 PK	159
	160	/*
	161	* Memory map
	162	*
	163	* 0x0000_0000 0x3FFF_FFFF DDR 1G cacheable
	164	* 0x8800_0000 0x8810_0000 IFC internal SRAM 1M
765b0bdb	165	* 0xB000_0000 0xB0FF_FFFF DSP core M2 memory 16M
7530d341 PK	166	* 0xC100_0000 0xC13F_FFFF MAPLE-2F 4M
	167	* 0xC1F0_0000 0xC1F3_FFFF PA L2 SRAM Region 0 256K
	168	* 0xC1F8_0000 0xC1F9_FFFF PA L2 SRAM Region 1 128K
	169	* 0xFED0_0000 0xFED0_3FFF SEC Secured RAM 16K
765b0bdb	170	* 0xFF60_0000 0xFF6F_FFFF DSP CCSR 1M
7530d341 PK	171	* 0xFF70_0000 0xFF7F_FFFF PA CCSR 1M
	172	* 0xFF80_0000 0xFFFF_FFFF Boot Page & NAND flash buffer 8M
	173	*
	174	*/
	175
	176	/*
	177	* IFC Definitions
	178	*/
	179	#define CONFIG_SYS_NO_FLASH
	180
	181	/* NAND Flash on IFC */
	182	#define CONFIG_SYS_NAND_BASE 0xff800000
	183	#define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE
	184
	185	#define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
	186	\| CSPR_PORT_SIZE_8 /* Port Size = 8 bit*/ \
	187	\| CSPR_MSEL_NAND /* MSEL = NAND */ \
	188	\| CSPR_V)
	189	#define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024)
	190
	191	#define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \
	192	\| CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \
	193	\| CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \
	194	\| CSOR_NAND_RAL_2 /* RAL = 2Byes */ \
	195	\| CSOR_NAND_PGS_2K /* Page Size = 2K */ \
	196	\| CSOR_NAND_SPRZ_64 /* Spare size = 64 */ \
	197	\| CSOR_NAND_PB(64)) /Pages Per Block = 64/
	198
	199	/* NAND Flash Timing Params */
	200	#define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x08) \
	201	\| FTIM0_NAND_TWP(0x06) \
	202	\| FTIM0_NAND_TWCHT(0x03) \
	203	\| FTIM0_NAND_TWH(0x04))
	204	#define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x18) \
	205	\| FTIM1_NAND_TWBE(0x23) \
	206	\| FTIM1_NAND_TRR(0x08) \
	207	\| FTIM1_NAND_TRP(0x05))
	208	#define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x08) \
	209	\| FTIM2_NAND_TREH(0x04) \
	210	\| FTIM2_NAND_TWHRE(0x3f))
	211	#define CONFIG_SYS_NAND_FTIM3 FTIM3_NAND_TWW(0x22)
	212
	213	#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE }
	214	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	215	#define CONFIG_MTD_NAND_VERIFY_WRITE
	216	#define CONFIG_CMD_NAND
	217	#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
	218
	219	#define CONFIG_SYS_NAND_DDR_LAW 11
	220
	221	/* Set up IFC registers for boot location NAND */
	222	#define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR
	223	#define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK
	224	#define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR
	225	#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0
	226	#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1
	227	#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2
	228	#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3
	229
	230	#define CONFIG_BOARD_EARLY_INIT_F /* Call board_pre_init */
	231
	232	#define CONFIG_SYS_INIT_RAM_LOCK
	233	#define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* stack in RAM */
	234	#define CONFIG_SYS_INIT_RAM_END 0x00004000/* End of used area in RAM */
235
236	#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END \
237	- GENERATED_GBL_DATA_SIZE)
238	#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
239
240	#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon*/
241	#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc*/
242
243	/* Serial Port */
244	#define CONFIG_CONS_INDEX 1
245	#undef CONFIG_SERIAL_SOFTWARE_FIFO
246	#define CONFIG_SYS_NS16550
247	#define CONFIG_SYS_NS16550_SERIAL
248	#define CONFIG_SYS_NS16550_REG_SIZE 1
249	#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
f1593269 PK	250	#ifdef CONFIG_SPL_BUILD
	251	#define CONFIG_NS16550_MIN_FUNCTIONS
	252	#endif
7530d341 PK	253
	254	#define CONFIG_SYS_CONSOLE_IS_IN_ENV /* determine from environment */
	255
	256	#define CONFIG_SYS_BAUDRATE_TABLE \
	257	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
	258
	259	#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
	260
	261	/* Use the HUSH parser */
	262	#define CONFIG_SYS_HUSH_PARSER
	263	#ifdef CONFIG_SYS_HUSH_PARSER
	264	#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
	265	#endif
	266
	267	/*
	268	* Pass open firmware flat tree
	269	*/
	270	#define CONFIG_OF_LIBFDT
	271	#define CONFIG_OF_BOARD_SETUP
	272	#define CONFIG_OF_STDOUT_VIA_ALIAS
	273
	274	/* new uImage format support */
	275	#define CONFIG_FIT
	276	#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */
	277
	278	#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
	279	#define CONFIG_HARD_I2C /* I2C with hardware support */
7530d341 PK	280	#define CONFIG_I2C_MULTI_BUS
	281	#define CONFIG_I2C_CMD_TREE
	282	#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address*/
	283	#define CONFIG_SYS_I2C_OFFSET 0x3000
	284
	285	/* I2C EEPROM */
	286	#define CONFIG_CMD_EEPROM
	287	#define CONFIG_SYS_I2C_MULTI_EEPROMS
	288	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
	289	#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
	290	#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
	291
	292	#define CONFIG_CMD_I2C
	293
	294
	295	#define CONFIG_FSL_ESPI
	296	/* eSPI - Enhanced SPI */
	297	#ifdef CONFIG_FSL_ESPI
	298	#define CONFIG_SPI_FLASH
	299	#define CONFIG_SPI_FLASH_SPANSION
	300	#define CONFIG_CMD_SF
	301	#define CONFIG_SF_DEFAULT_SPEED 10000000
	302	#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
	303	#endif
	304
	305	#if defined(CONFIG_TSEC_ENET)
	306
	307	#define CONFIG_MII /* MII PHY management */
	308	#define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */
	309	#define CONFIG_TSEC1 1
	310	#define CONFIG_TSEC1_NAME "eTSEC1"
	311	#define CONFIG_TSEC2 1
	312	#define CONFIG_TSEC2_NAME "eTSEC2"
	313
	314	#define TSEC1_PHY_ADDR 0
	315	#define TSEC2_PHY_ADDR 3
	316
	317	#define TSEC1_FLAGS (TSEC_GIGABIT \| TSEC_REDUCED)
	318	#define TSEC2_FLAGS (TSEC_GIGABIT \| TSEC_REDUCED)
	319
	320	#define TSEC1_PHYIDX 0
	321
	322	#define TSEC2_PHYIDX 0
	323
	324	#define CONFIG_ETHPRIME "eTSEC1"
	325
	326	#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */
	327
	328	#endif /* CONFIG_TSEC_ENET */
	329
	330	/*
	331	* Environment
	332	*/
7530d341 PK	333	#if defined(CONFIG_RAMBOOT_SPIFLASH)
	334	#define CONFIG_ENV_IS_IN_SPI_FLASH
	335	#define CONFIG_ENV_SPI_BUS 0
	336	#define CONFIG_ENV_SPI_CS 0
	337	#define CONFIG_ENV_SPI_MAX_HZ 10000000
	338	#define CONFIG_ENV_SPI_MODE 0
	339	#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */
	340	#define CONFIG_ENV_SECT_SIZE 0x10000
	341	#define CONFIG_ENV_SIZE 0x2000
f1593269 PK	342	#elif defined(CONFIG_NAND)
	343	#define CONFIG_ENV_IS_IN_NAND
	344	#define CONFIG_SYS_EXTRA_ENV_RELOC
	345	#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
	346	#define CONFIG_ENV_OFFSET ((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE)
	347	#define CONFIG_ENV_RANGE (3 * CONFIG_ENV_SIZE)
	348	#elif defined(CONFIG_SYS_RAMBOOT)
	349	#define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */
7530d341	350	#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000)
f1593269	351	#define CONFIG_ENV_SIZE 0x2000
7530d341 PK	352	#endif
	353
	354	#define CONFIG_LOADS_ECHO /* echo on for serial download */
	355	#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
	356
	357	/*
	358	* Command line configuration.
	359	*/
	360	#include <config_cmd_default.h>
	361
	362	#define CONFIG_CMD_DHCP
	363	#define CONFIG_CMD_ERRATA
	364	#define CONFIG_CMD_ELF
	365	#define CONFIG_CMD_EXT2
	366	#define CONFIG_CMD_FAT
	367	#define CONFIG_CMD_IRQ
	368	#define CONFIG_CMD_MII
	369	#define CONFIG_DOS_PARTITION
	370	#define CONFIG_CMD_PING
	371	#define CONFIG_CMD_REGINFO
	372	#define CONFIG_CMD_SETEXPR
	373
	374	/*
	375	* Miscellaneous configurable options
	376	*/
	377	#define CONFIG_SYS_LONGHELP /* undef to save memory */
	378	#define CONFIG_CMDLINE_EDITING /* Command-line editing */
	379	#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
	380	#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
	381	#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
	382
	383	#if defined(CONFIG_CMD_KGDB)
	384	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
	385	#else
	386	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
	387	#endif
	388	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
	389	/* Print Buffer Size */
	390	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	391	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
	392	#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */
	393
	394	/*
	395	* For booting Linux, the board info and command line data
	396	* have to be in the first 64 MB of memory, since this is
	397	* the maximum mapped by the Linux kernel during initialization.
	398	*/
	399	#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux */
	400	#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
	401
	402	#if defined(CONFIG_CMD_KGDB)
	403	#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
	404	#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
	405	#endif
	406
	407	#define CONFIG_USB_EHCI
	408
	409	#ifdef CONFIG_USB_EHCI
	410	#define CONFIG_CMD_USB
	411	#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
	412	#define CONFIG_USB_EHCI_FSL
	413	#define CONFIG_USB_STORAGE
	414	#define CONFIG_HAS_FSL_DR_USB
	415	#endif
416
417	/*
418	* Environment Configuration
419	*/
420
421	#if defined(CONFIG_TSEC_ENET)
422	#define CONFIG_HAS_ETH0
423	#endif
424
425	#define CONFIG_HOSTNAME BSC9131rdb
426	#define CONFIG_ROOTPATH "/opt/nfsroot"
427	#define CONFIG_BOOTFILE "uImage"
428	#define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server */
429
430	#define CONFIG_BAUDRATE 115200
431
432	#define CONFIG_EXTRA_ENV_SETTINGS \
433	"netdev=eth0\0" \
434	"uboot=" CONFIG_UBOOTPATH "\0" \
435	"loadaddr=1000000\0" \
436	"bootfile=uImage\0" \
437	"consoledev=ttyS0\0" \
438	"ramdiskaddr=2000000\0" \
439	"ramdiskfile=rootfs.ext2.gz.uboot\0" \
440	"fdtaddr=c00000\0" \
441	"fdtfile=bsc9131rdb.dtb\0" \
442	"bdev=sda1\0" \
443	"hwconfig=usb1:dr_mode=host,phy_type=ulpi\0" \
1d2949ae PJ	444	"bootm_size=0x37000000\0" \
	445	"othbootargs=ramdisk_size=600000 " \
	446	"default_hugepagesz=256m hugepagesz=256m hugepages=1\0" \
7530d341 PK	447	"usbext2boot=setenv bootargs root=/dev/ram rw " \
	448	"console=$consoledev,$baudrate $othbootargs; " \
	449	"usb start;" \
	450	"ext2load usb 0:4 $loadaddr $bootfile;" \
	451	"ext2load usb 0:4 $fdtaddr $fdtfile;" \
	452	"ext2load usb 0:4 $ramdiskaddr $ramdiskfile;" \
	453	"bootm $loadaddr $ramdiskaddr $fdtaddr\0" \
	454
	455	#define CONFIG_RAMBOOTCOMMAND \
	456	"setenv bootargs root=/dev/ram rw " \
	457	"console=$consoledev,$baudrate $othbootargs; " \
	458	"tftp $ramdiskaddr $ramdiskfile;" \
	459	"tftp $loadaddr $bootfile;" \
	460	"tftp $fdtaddr $fdtfile;" \
	461	"bootm $loadaddr $ramdiskaddr $fdtaddr"
	462
	463	#define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND
	464
	465	#endif /* __CONFIG_H */