[people/ms/u-boot.git] / include / configs / CCM.h

/*
 * (C) Copyright 2001
 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

/*
 * configuration options, board specific, for Siemens Card Controller Module
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#undef	CCM_80MHz			/* define for 80 MHz CPU only */

/*
 * High Level Configuration Options
 * (easy to change)
 */

#define CONFIG_MPC860           1   /* This is a MPC860 CPU ... */
#define CONFIG_CCM              1   /* on a Card Controller Module  */

#define CONFIG_8xx_CONS_SMC1    1   /* Console is on SMC1       */
#undef  CONFIG_8xx_CONS_SMC2
#undef  CONFIG_8xx_CONS_NONE

/*  ENVIRONMENT */

#define CONFIG_BAUDRATE         19200         /* console baudrate in bps    */
#define CONFIG_BOOTDELAY        2             /* autoboot after 2 seconds   */
#define CONFIG_CLOCKS_IN_MHZ    1             /* clocks passsed to Linux in MHz */

#define CONFIG_IPADDR           192.168.0.42
#define CONFIG_NETMASK          255.255.255.0
#define CONFIG_GATEWAYIP        0.0.0.0
#define CONFIG_SERVERIP         192.168.0.254

#define CONFIG_HOSTNAME         CCM

#define CONFIG_LOADADDR         40180000

#undef	CONFIG_BOOTARGS

#define CONFIG_BOOTCOMMAND      "setenv bootargs " \
                                "mem=$(mem) " \
                                "root=/dev/ram rw ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off " \
                                "wt_8xx=timeout:3600; " \
                                "bootm"

#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
#undef	CFG_LOADS_BAUD_CHANGE	/* don't allow baudrate change	*/

#define	CONFIG_WATCHDOG		1	/* watchdog enabled		*/

#undef	CONFIG_STATUS_LED		/* Status LED disabled		*/

#define	CONFIG_PRAM		512	/* reserve 512kB "protected RAM"*/

#define	CONFIG_RTC_MPC8xx		/* use internal RTC of MPC8xx	*/

#define	CONFIG_SPI			/* enable SPI driver		*/
#define	CONFIG_SPI_X			/* 16 bit EEPROM addressing	*/

/* ----------------------------------------------------------------
 * Offset to initial SPI buffers in DPRAM (used if the environment
 * is in the SPI EEPROM): We need a 520 byte scratch DPRAM area to
 * use at an early stage. It is used between the two initialization
 * calls (spi_init_f() and spi_init_r()). The value 0xB00 makes it
 * far enough from the start of the data area (as well as from the
 * stack pointer).
 * ---------------------------------------------------------------- */
#define CFG_SPI_INIT_OFFSET		0xB00

#define CFG_EEPROM_PAGE_WRITE_BITS	5	/* 32-byte page size	*/


#define CONFIG_MAC_PARTITION		/* nod used yet			*/
#define CONFIG_DOS_PARTITION

#define CONFIG_BOOTP_MASK	(CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)

#define CONFIG_COMMANDS	      ( CONFIG_CMD_DFL	| \
				CFG_CMD_DHCP	| \
				CFG_CMD_DATE	| \
				CFG_CMD_EEPROM	| \
				CFG_CMD_BSP	)

/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>

/*----------------------------------------------------------------------*/

/*
 * Miscellaneous configurable options
 */
#define	CFG_LONGHELP			/* undef to save memory		*/
#define	CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
#else
#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
#endif
#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define	CFG_MAXARGS	16		/* max number of command args	*/
#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/

#define CFG_MEMTEST_START	0x00100000	/* memtest works on	*/
#define CFG_MEMTEST_END		0x00F00000	/* 1 ... 15MB in DRAM	*/

#define	CFG_LOAD_ADDR		0x00100000	/* default load address	*/

/* Ethernet hardware configuration done using port pins */
#define CFG_PA_ETH_RESET 	0x0200		/* PA  6	*/
#define CFG_PA_ETH_MDDIS	0x4000		/* PA  1	*/
#define CFG_PB_ETH_POWERDOWN	0x00000800	/* PB 20	*/
#define CFG_PB_ETH_CFG1		0x00000400	/* PB 21	*/
#define CFG_PB_ETH_CFG2		0x00000200	/* PB 22	*/
#define CFG_PB_ETH_CFG3		0x00000100	/* PB 23	*/

/* Ethernet settings:
 * MDIO not disabled, autonegotiation, 10/100Mbps, half/full duplex
 */
#define CFG_ETH_MDDIS_VALUE	0
#define CFG_ETH_CFG1_VALUE	1
#define CFG_ETH_CFG2_VALUE	1
#define CFG_ETH_CFG3_VALUE	1

/* PUMA configuration */
#define CFG_PC_PUMA_PROG	0x0200		/* PC  6        */
#define CFG_PC_PUMA_DONE	0x0008		/* PC 12	*/
#define CFG_PC_PUMA_INIT	0x0004		/* PC 13	*/

#define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/

#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }

/*
 * Low Level Configuration Settings
 * (address mappings, register initial values, etc.)
 * You should know what you are doing if you make changes here.
 */
/*-----------------------------------------------------------------------
 * Internal Memory Mapped Register
 */
#define CFG_IMMR		0xF0000000

/*-----------------------------------------------------------------------
 * Definitions for initial stack pointer and data area (in DPRAM)
 */
#define CFG_INIT_RAM_ADDR	CFG_IMMR
#define	CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET

/*-----------------------------------------------------------------------
 * Address accessed to reset the board - must not be mapped/assigned
 */
#define	CFG_RESET_ADDRESS	0xFEFFFFFF

/*-----------------------------------------------------------------------
 * Start addresses for the final memory configuration
 * (Set up by the startup code)
 * Please note that CFG_SDRAM_BASE _must_ start at 0
 */
#define	CFG_SDRAM_BASE		0x00000000
#define CFG_FLASH_BASE		0x40000000
#if defined(DEBUG)
#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
#else
#define	CFG_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
#endif
#define CFG_MONITOR_BASE	CFG_FLASH_BASE
#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 8 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization.
 */
#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/

/*-----------------------------------------------------------------------
 * FLASH organization
 */
#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
#define CFG_MAX_FLASH_SECT	67	/* max number of sectors on one chip	*/

#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/

#if 1
/* Start port with environment in flash; switch to SPI EEPROM later */
#define	CFG_ENV_IS_IN_FLASH	1
#define	CFG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
#define	CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/

/* Address and size of Redundant Environment Sector	*/
#define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SIZE)
#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
#else
/* Final version: environment in EEPROM */
#define CFG_ENV_IS_IN_EEPROM	1
#define CFG_ENV_OFFSET		2048
#define CFG_ENV_SIZE		2048
#endif

/*-----------------------------------------------------------------------
 * Hardware Information Block
 */
#define CFG_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
#define CFG_HWINFO_SIZE		0x00000040	/* size   of HW Info block */
#define CFG_HWINFO_MAGIC	0x54514D38	/* 'TQM8' */

/*-----------------------------------------------------------------------
 * Cache Configuration
 */
#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/

/*-----------------------------------------------------------------------
 * SYPCR - System Protection Control				11-9
 * SYPCR can only be written once after reset!
 *-----------------------------------------------------------------------
 * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
 */
#if defined(CONFIG_WATCHDOG)
#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
#else
#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
						  SYPCR_SWP)
#endif

/*-----------------------------------------------------------------------
 * SIUMCR - SIU Module Configuration				11-6
 *-----------------------------------------------------------------------
 * we must activate GPL5 in the SIUMCR for CAN
 */
#define CFG_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)

/*-----------------------------------------------------------------------
 * TBSCR - Time Base Status and Control				11-26
 *-----------------------------------------------------------------------
 * Clear Reference Interrupt Status, Timebase freezing enabled
 */
#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)

/*-----------------------------------------------------------------------
 * RTCSC - Real-Time Clock Status and Control Register		11-27
 *-----------------------------------------------------------------------
 */
#define CFG_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)

/*-----------------------------------------------------------------------
 * PISCR - Periodic Interrupt Status and Control		11-31
 *-----------------------------------------------------------------------
 * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
 */
#define CFG_PISCR	(PISCR_PS | PISCR_PITF)

/*-----------------------------------------------------------------------
 * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
 *-----------------------------------------------------------------------
 * Reset PLL lock status sticky bit, timer expired status bit and timer
 * interrupt status bit
 *
 * If this is a 80 MHz CPU, set PLL multiplication factor to 5 (5*16=80)!
 */
#ifdef	CCM_80MHz	/* for 80 MHz, we use a 16 MHz clock * 5 */
#define CFG_PLPRCR							\
		( (5-1)<<PLPRCR_MF_SHIFT | PLPRCR_TEXPS | PLPRCR_TMIST )
#else			/* up to 50 MHz we use a 1:1 clock */
#define CFG_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
#endif	/* CCM_80MHz */

/*-----------------------------------------------------------------------
 * SCCR - System Clock and reset Control Register		15-27
 *-----------------------------------------------------------------------
 * Set clock output, timebase and RTC source and divider,
 * power management and some other internal clocks
 */
#define SCCR_MASK	SCCR_EBDF11
#ifdef	CCM_80MHz	/* for 80 MHz, we use a 16 MHz clock * 5 */
#define CFG_SCCR	(/* SCCR_TBS  | */ \
			 SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
			 SCCR_DFALCD00)
#else			/* up to 50 MHz we use a 1:1 clock */
#define CFG_SCCR	(SCCR_TBS     | \
			 SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
			 SCCR_DFALCD00)
#endif	/* CCM_80MHz */

/*-----------------------------------------------------------------------
 *
 * Interrupt Levels
 *-----------------------------------------------------------------------
 */
#define CFG_CPM_INTERRUPT	13	/* SIU_LEVEL6	*/

/*-----------------------------------------------------------------------
 *
 *-----------------------------------------------------------------------
 *
 */
#define CFG_DER	0

/*
 * Init Memory Controller:
 *
 * BR0/1 and OR0/1 (FLASH)
 */

#define FLASH_BASE0_PRELIM	0x40000000	/* FLASH bank #0	*/
#define FLASH_BASE1_PRELIM	0x60000000	/* FLASH bank #0	*/

/* used to re-map FLASH both when starting from SRAM or FLASH:
 * restrict access enough to keep SRAM working (if any)
 * but not too much to meddle with FLASH accesses
 */
#define CFG_REMAP_OR_AM		0x80000000	/* OR addr mask */
#define CFG_PRELIM_OR_AM	0xE0000000	/* OR addr mask */

/* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1	*/
#define CFG_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_ACS_DIV2 | OR_BI | \
				 OR_SCY_5_CLK | OR_EHTR)

#define CFG_OR0_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )

#define CFG_OR1_REMAP	CFG_OR0_REMAP
#define CFG_OR1_PRELIM	CFG_OR0_PRELIM
#define CFG_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )

/*
 * BR2 and OR2 (SDRAM)
 *
 */
#define SDRAM_BASE2_PRELIM	0x00000000	/* SDRAM bank #0	*/
#define SDRAM_BASE3_PRELIM	0x20000000	/* SDRAM bank #1	*/
#define	SDRAM_MAX_SIZE		0x04000000	/* max 64 MB per bank	*/

/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
#define CFG_OR_TIMING_SDRAM	0x00000A00

#define CFG_OR2_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM )
#define CFG_BR2_PRELIM	((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )

/*
 * BR3 and OR3 (CAN Controller)
 */
#define	CFG_CAN_BASE		0xC0000000	/* CAN mapped at 0xC0000000	*/
#define CFG_CAN_OR_AM		0xFFFF8000	/* 32 kB address mask		*/
#define CFG_OR3_CAN		(CFG_CAN_OR_AM | OR_G5LA | OR_BI)
#define CFG_BR3_CAN		((CFG_CAN_BASE & BR_BA_MSK) | \
					BR_PS_8 | BR_MS_UPMB | BR_V )

/*
 * BR4/OR4: PUMA Config
 *
 * Memory controller will be used in 2 modes:
 *
 * - "read" mode:
 *	BR4: 0x10100801		OR4: 0xffff8520
 * - "load" mode (chip select on UPM B):
 *	BR4: 0x101004c1		OR4: 0xffff8600
 *
 * Default initialization is in "read" mode
 */
#define PUMA_CONF_BASE		0x10100000	/* PUMA Config */
#define PUMA_CONF_OR_AM		0xFFFF8000	/* 32 kB */
#define	PUMA_CONF_LOAD_TIMING	(OR_ACS_DIV2	 | OR_SCY_2_CLK)
#define PUMA_CONF_READ_TIMING	(OR_G5LA | OR_BI | OR_SCY_2_CLK)

#define PUMA_CONF_BR_LOAD	((PUMA_CONF_BASE & BR_BA_MSK) | \
					BR_PS_8  | BR_MS_UPMB | BR_V)
#define PUMA_CONF_OR_LOAD	(PUMA_CONF_OR_AM | PUMA_CONF_LOAD_TIMING)

#define PUMA_CONF_BR_READ	((PUMA_CONF_BASE & BR_BA_MSK) | BR_PS_16 | BR_V)
#define PUMA_CONF_OR_READ	(PUMA_CONF_OR_AM | PUMA_CONF_READ_TIMING)

#define CFG_BR4_PRELIM		PUMA_CONF_BR_READ
#define CFG_OR4_PRELIM		PUMA_CONF_OR_READ

/*
 * BR5/OR5: PUMA: SMA Bus 8 Bit
 *	BR5: 0x10200401		OR5: 0xffe0010a
 */
#define PUMA_SMA8_BASE		0x10200000	/* PUMA SMA Bus 8 Bit */
#define PUMA_SMA8_OR_AM		0xFFE00000	/* 2 MB */
#define PUMA_SMA8_TIMING	(OR_BI | OR_SCY_0_CLK | OR_EHTR)

#define CFG_BR5_PRELIM		((PUMA_SMA8_BASE & BR_BA_MSK) | BR_PS_8 | BR_V)
#define CFG_OR5_PRELIM		(PUMA_SMA8_OR_AM | PUMA_SMA8_TIMING | OR_SETA)

/*
 * BR6/OR6: PUMA: SMA Bus 16 Bit
 *	BR6: 0x10600801		OR6: 0xffe0010a
 */
#define PUMA_SMA16_BASE		0x10600000	/* PUMA SMA Bus 16 Bit */
#define PUMA_SMA16_OR_AM	0xFFE00000	/* 2 MB */
#define PUMA_SMA16_TIMING	(OR_BI | OR_SCY_0_CLK | OR_EHTR)

#define CFG_BR6_PRELIM		((PUMA_SMA16_BASE & BR_BA_MSK) | BR_PS_16 | BR_V)
#define CFG_OR6_PRELIM		(PUMA_SMA16_OR_AM | PUMA_SMA16_TIMING | OR_SETA)

/*
 * BR7/OR7: PUMA: external Flash
 *	BR7: 0x10a00801		OR7: 0xfe00010a
 */
#define PUMA_FLASH_BASE		0x10A00000	/* PUMA external Flash */
#define PUMA_FLASH_OR_AM	0xFE000000	/* 32 MB */
#define PUMA_FLASH_TIMING	(OR_BI | OR_SCY_0_CLK | OR_EHTR)

#define CFG_BR7_PRELIM		((PUMA_FLASH_BASE & BR_BA_MSK) | BR_PS_16 | BR_V)
#define CFG_OR7_PRELIM		(PUMA_FLASH_OR_AM | PUMA_FLASH_TIMING | OR_SETA)


/*
 * Memory Periodic Timer Prescaler
 */

/* periodic timer for refresh */
#define CFG_MAMR_PTA	97		/* start with divider for 100 MHz	*/

/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit	*/
#define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
#define CFG_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/

/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/
#define CFG_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
#define CFG_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/

/*
 * MAMR settings for SDRAM
 */

/* 8 column SDRAM */
#define CFG_MAMR_8COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
/* 9 column SDRAM */
#define CFG_MAMR_9COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)


/*
 * Internal Definitions
 *
 * Boot Flags
 */
#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
#define BOOTFLAG_WARM	0x02		/* Software reboot			*/

#endif	/* __CONFIG_H */
Commit	Line	Data
c609719b WD	1	/*
	2	* (C) Copyright 2001
	3	* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
	4	*
	5	* See file CREDITS for list of people who contributed to this
	6	* project.
	7	*
	8	* This program is free software; you can redistribute it and/or
	9	* modify it under the terms of the GNU General Public License as
	10	* published by the Free Software Foundation; either version 2 of
	11	* the License, or (at your option) any later version.
	12	*
	13	* This program is distributed in the hope that it will be useful,
	14	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	15	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	16	* GNU General Public License for more details.
	17	*
	18	* You should have received a copy of the GNU General Public License
	19	* along with this program; if not, write to the Free Software
	20	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	21	* MA 02111-1307 USA
	22	*/
	23
	24	/*
	25	* configuration options, board specific, for Siemens Card Controller Module
	26	*/
	27
	28	#ifndef __CONFIG_H
	29	#define __CONFIG_H
	30
	31	#undef CCM_80MHz /* define for 80 MHz CPU only */
	32
	33	/*
	34	* High Level Configuration Options
	35	* (easy to change)
	36	*/
	37
	38	#define CONFIG_MPC860 1 /* This is a MPC860 CPU ... */
	39	#define CONFIG_CCM 1 /* on a Card Controller Module */
	40
	41	#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
	42	#undef CONFIG_8xx_CONS_SMC2
	43	#undef CONFIG_8xx_CONS_NONE
	44
	45	/* ENVIRONMENT */
	46
	47	#define CONFIG_BAUDRATE 19200 /* console baudrate in bps */
	48	#define CONFIG_BOOTDELAY 2 /* autoboot after 2 seconds */
	49	#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
	50
	51	#define CONFIG_IPADDR 192.168.0.42
	52	#define CONFIG_NETMASK 255.255.255.0
	53	#define CONFIG_GATEWAYIP 0.0.0.0
	54	#define CONFIG_SERVERIP 192.168.0.254
	55
	56	#define CONFIG_HOSTNAME CCM
	57
	58	#define CONFIG_LOADADDR 40180000
	59
	60	#undef CONFIG_BOOTARGS
	61
	62	#define CONFIG_BOOTCOMMAND "setenv bootargs " \
	63	"mem=$(mem) " \
	64	"root=/dev/ram rw ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off " \
65	"wt_8xx=timeout:3600; " \
66	"bootm"
67
68	#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
69	#undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */
70
71	#define CONFIG_WATCHDOG 1 /* watchdog enabled */
72
73	#undef CONFIG_STATUS_LED /* Status LED disabled */
74
75	#define CONFIG_PRAM 512 /* reserve 512kB "protected RAM"*/
76
77	#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
78
79	#define CONFIG_SPI /* enable SPI driver */
80	#define CONFIG_SPI_X /* 16 bit EEPROM addressing */
81
82	/* ----------------------------------------------------------------
83	* Offset to initial SPI buffers in DPRAM (used if the environment
84	* is in the SPI EEPROM): We need a 520 byte scratch DPRAM area to
85	* use at an early stage. It is used between the two initialization
86	* calls (spi_init_f() and spi_init_r()). The value 0xB00 makes it
87	* far enough from the start of the data area (as well as from the
88	* stack pointer).
89	* ---------------------------------------------------------------- */
90	#define CFG_SPI_INIT_OFFSET 0xB00
91
92	#define CFG_EEPROM_PAGE_WRITE_BITS 5 /* 32-byte page size */
93
94
95	#define CONFIG_MAC_PARTITION /* nod used yet */
96	#define CONFIG_DOS_PARTITION
97
98	#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT \| CONFIG_BOOTP_BOOTFILESIZE)
99
100	#define CONFIG_COMMANDS ( CONFIG_CMD_DFL \| \
101	CFG_CMD_DHCP \| \
102	CFG_CMD_DATE \| \
103	CFG_CMD_EEPROM \| \
104	CFG_CMD_BSP )
105
106	/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
107	#include <cmd_confdefs.h>
108
109	/----------------------------------------------------------------------/
110
111	/*
112	* Miscellaneous configurable options
113	*/
114	#define CFG_LONGHELP /* undef to save memory */
115	#define CFG_PROMPT "=> " /* Monitor Command Prompt */
116	#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
117	#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
118	#else
119	#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
120	#endif
121	#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
122	#define CFG_MAXARGS 16 /* max number of command args */
123	#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
124
125	#define CFG_MEMTEST_START 0x00100000 /* memtest works on */
126	#define CFG_MEMTEST_END 0x00F00000 /* 1 ... 15MB in DRAM */
127
128	#define CFG_LOAD_ADDR 0x00100000 /* default load address */
129
130	/* Ethernet hardware configuration done using port pins */
131	#define CFG_PA_ETH_RESET 0x0200 /* PA 6 */
132	#define CFG_PA_ETH_MDDIS 0x4000 /* PA 1 */
133	#define CFG_PB_ETH_POWERDOWN 0x00000800 /* PB 20 */
134	#define CFG_PB_ETH_CFG1 0x00000400 /* PB 21 */
135	#define CFG_PB_ETH_CFG2 0x00000200 /* PB 22 */
136	#define CFG_PB_ETH_CFG3 0x00000100 /* PB 23 */
137
138	/* Ethernet settings:
139	* MDIO not disabled, autonegotiation, 10/100Mbps, half/full duplex
140	*/
141	#define CFG_ETH_MDDIS_VALUE 0
142	#define CFG_ETH_CFG1_VALUE 1
143	#define CFG_ETH_CFG2_VALUE 1
144	#define CFG_ETH_CFG3_VALUE 1
145
146	/* PUMA configuration */
147	#define CFG_PC_PUMA_PROG 0x0200 /* PC 6 */
148	#define CFG_PC_PUMA_DONE 0x0008 /* PC 12 */
149	#define CFG_PC_PUMA_INIT 0x0004 /* PC 13 */
150
151	#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
152
153	#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
154
155	/*
156	* Low Level Configuration Settings
157	* (address mappings, register initial values, etc.)
158	* You should know what you are doing if you make changes here.
159	*/
160	/*-----------------------------------------------------------------------
161	* Internal Memory Mapped Register
162	*/
163	#define CFG_IMMR 0xF0000000
164
165	/*-----------------------------------------------------------------------
166	* Definitions for initial stack pointer and data area (in DPRAM)
167	*/
168	#define CFG_INIT_RAM_ADDR CFG_IMMR
169	#define CFG_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */
170	#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
171	#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
172	#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
173
174	/*-----------------------------------------------------------------------
175	* Address accessed to reset the board - must not be mapped/assigned
176	*/
177	#define CFG_RESET_ADDRESS 0xFEFFFFFF
178
179	/*-----------------------------------------------------------------------
180	* Start addresses for the final memory configuration
181	* (Set up by the startup code)
182	* Please note that CFG_SDRAM_BASE _must_ start at 0
183	*/
184	#define CFG_SDRAM_BASE 0x00000000
185	#define CFG_FLASH_BASE 0x40000000
186	#if defined(DEBUG)
187	#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
188	#else
189	#define CFG_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
190	#endif
191	#define CFG_MONITOR_BASE CFG_FLASH_BASE
192	#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
193
194	/*
195	* For booting Linux, the board info and command line data
196	* have to be in the first 8 MB of memory, since this is
197	* the maximum mapped by the Linux kernel during initialization.
198	*/
199	#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
200
201	/*-----------------------------------------------------------------------
202	* FLASH organization
203	*/
204	#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
205	#define CFG_MAX_FLASH_SECT 67 /* max number of sectors on one chip */
206
207	#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
208	#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
209
210	#if 1
211	/* Start port with environment in flash; switch to SPI EEPROM later */
212	#define CFG_ENV_IS_IN_FLASH 1
213	#define CFG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */
214	#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
6aff3115 WD	215
	216	/* Address and size of Redundant Environment Sector */
	217	#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SIZE)
	218	#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
c609719b WD	219	#else
	220	/* Final version: environment in EEPROM */
	221	#define CFG_ENV_IS_IN_EEPROM 1
	222	#define CFG_ENV_OFFSET 2048
	223	#define CFG_ENV_SIZE 2048
	224	#endif
	225
	226	/*-----------------------------------------------------------------------
	227	* Hardware Information Block
	228	*/
	229	#define CFG_HWINFO_OFFSET 0x0003FFC0 /* offset of HW Info block */
	230	#define CFG_HWINFO_SIZE 0x00000040 /* size of HW Info block */
	231	#define CFG_HWINFO_MAGIC 0x54514D38 /* 'TQM8' */
	232
	233	/*-----------------------------------------------------------------------
	234	* Cache Configuration
	235	*/
	236	#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
	237	#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
	238
	239	/*-----------------------------------------------------------------------
	240	* SYPCR - System Protection Control 11-9
	241	* SYPCR can only be written once after reset!
	242	*-----------------------------------------------------------------------
	243	* Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
	244	*/
	245	#if defined(CONFIG_WATCHDOG)
	246	#define CFG_SYPCR (SYPCR_SWTC \| SYPCR_BMT \| SYPCR_BME \| SYPCR_SWF \| \
	247	SYPCR_SWE \| SYPCR_SWRI\| SYPCR_SWP)
	248	#else
6aff3115 WD	249	#define CFG_SYPCR (SYPCR_SWTC \| SYPCR_BMT \| SYPCR_BME \| SYPCR_SWF \| \
6aff3115 WD	250	SYPCR_SWP)
c609719b WD	251	#endif
	252
	253	/*-----------------------------------------------------------------------
	254	* SIUMCR - SIU Module Configuration 11-6
	255	*-----------------------------------------------------------------------
	256	* we must activate GPL5 in the SIUMCR for CAN
	257	*/
	258	#define CFG_SIUMCR (SIUMCR_DBGC11 \| SIUMCR_DBPC00 \| SIUMCR_MLRC01)
	259
	260	/*-----------------------------------------------------------------------
	261	* TBSCR - Time Base Status and Control 11-26
	262	*-----------------------------------------------------------------------
	263	* Clear Reference Interrupt Status, Timebase freezing enabled
	264	*/
	265	#define CFG_TBSCR (TBSCR_REFA \| TBSCR_REFB \| TBSCR_TBF)
	266
	267	/*-----------------------------------------------------------------------
	268	* RTCSC - Real-Time Clock Status and Control Register 11-27
	269	*-----------------------------------------------------------------------
	270	*/
	271	#define CFG_RTCSC (RTCSC_SEC \| RTCSC_ALR \| RTCSC_RTF\| RTCSC_RTE)
	272
	273	/*-----------------------------------------------------------------------
	274	* PISCR - Periodic Interrupt Status and Control 11-31
	275	*-----------------------------------------------------------------------
	276	* Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
	277	*/
	278	#define CFG_PISCR (PISCR_PS \| PISCR_PITF)
	279
	280	/*-----------------------------------------------------------------------
	281	* PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
	282	*-----------------------------------------------------------------------
	283	* Reset PLL lock status sticky bit, timer expired status bit and timer
	284	* interrupt status bit
	285	*
	286	* If this is a 80 MHz CPU, set PLL multiplication factor to 5 (5*16=80)!
	287	*/
	288	#ifdef CCM_80MHz /* for 80 MHz, we use a 16 MHz clock * 5 */
	289	#define CFG_PLPRCR \
	290	( (5-1)<<PLPRCR_MF_SHIFT \| PLPRCR_TEXPS \| PLPRCR_TMIST )
	291	#else /* up to 50 MHz we use a 1:1 clock */
	292	#define CFG_PLPRCR (PLPRCR_SPLSS \| PLPRCR_TEXPS \| PLPRCR_TMIST)
	293	#endif /* CCM_80MHz */
	294
	295	/*-----------------------------------------------------------------------
	296	* SCCR - System Clock and reset Control Register 15-27
	297	*-----------------------------------------------------------------------
	298	* Set clock output, timebase and RTC source and divider,
	299	* power management and some other internal clocks
	300	*/
	301	#define SCCR_MASK SCCR_EBDF11
	302	#ifdef CCM_80MHz /* for 80 MHz, we use a 16 MHz clock * 5 */
	303	#define CFG_SCCR (/* SCCR_TBS \| */ \
	304	SCCR_COM00 \| SCCR_DFSYNC00 \| SCCR_DFBRG00 \| \
	305	SCCR_DFNL000 \| SCCR_DFNH000 \| SCCR_DFLCD000 \| \
	306	SCCR_DFALCD00)
	307	#else /* up to 50 MHz we use a 1:1 clock */
	308	#define CFG_SCCR (SCCR_TBS \| \
	309	SCCR_COM00 \| SCCR_DFSYNC00 \| SCCR_DFBRG00 \| \
	310	SCCR_DFNL000 \| SCCR_DFNH000 \| SCCR_DFLCD000 \| \
	311	SCCR_DFALCD00)
	312	#endif /* CCM_80MHz */
	313
	314	/*-----------------------------------------------------------------------
315	*
316	* Interrupt Levels
317	*-----------------------------------------------------------------------
318	*/
319	#define CFG_CPM_INTERRUPT 13 /* SIU_LEVEL6 */
320
321	/*-----------------------------------------------------------------------
322	*
323	*-----------------------------------------------------------------------
324	*
325	*/
326	#define CFG_DER 0
327
328	/*
329	* Init Memory Controller:
330	*
331	* BR0/1 and OR0/1 (FLASH)
332	*/
333
334	#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */
335	#define FLASH_BASE1_PRELIM 0x60000000 /* FLASH bank #0 */
336
337	/* used to re-map FLASH both when starting from SRAM or FLASH:
338	* restrict access enough to keep SRAM working (if any)
339	* but not too much to meddle with FLASH accesses
340	*/
341	#define CFG_REMAP_OR_AM 0x80000000 /* OR addr mask */
342	#define CFG_PRELIM_OR_AM 0xE0000000 /* OR addr mask */
343
344	/* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1 */
345	#define CFG_OR_TIMING_FLASH (OR_CSNT_SAM \| OR_ACS_DIV2 \| OR_BI \| \
346	OR_SCY_5_CLK \| OR_EHTR)
347
348	#define CFG_OR0_REMAP (CFG_REMAP_OR_AM \| CFG_OR_TIMING_FLASH)
349	#define CFG_OR0_PRELIM (CFG_PRELIM_OR_AM \| CFG_OR_TIMING_FLASH)
350	#define CFG_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) \| BR_V )
351
352	#define CFG_OR1_REMAP CFG_OR0_REMAP
353	#define CFG_OR1_PRELIM CFG_OR0_PRELIM
354	#define CFG_BR1_PRELIM ((FLASH_BASE1_PRELIM & BR_BA_MSK) \| BR_V )
355
356	/*
357	* BR2 and OR2 (SDRAM)
358	*
359	*/
360	#define SDRAM_BASE2_PRELIM 0x00000000 /* SDRAM bank #0 */
361	#define SDRAM_BASE3_PRELIM 0x20000000 /* SDRAM bank #1 */
362	#define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB per bank */
363
364	/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */
365	#define CFG_OR_TIMING_SDRAM 0x00000A00
366
367	#define CFG_OR2_PRELIM (CFG_PRELIM_OR_AM \| CFG_OR_TIMING_SDRAM )
368	#define CFG_BR2_PRELIM ((SDRAM_BASE2_PRELIM & BR_BA_MSK) \| BR_MS_UPMA \| BR_V )
369
370	/*
371	* BR3 and OR3 (CAN Controller)
372	*/
373	#define CFG_CAN_BASE 0xC0000000 /* CAN mapped at 0xC0000000 */
374	#define CFG_CAN_OR_AM 0xFFFF8000 /* 32 kB address mask */
375	#define CFG_OR3_CAN (CFG_CAN_OR_AM \| OR_G5LA \| OR_BI)
376	#define CFG_BR3_CAN ((CFG_CAN_BASE & BR_BA_MSK) \| \
377	BR_PS_8 \| BR_MS_UPMB \| BR_V )
378
379	/*
380	* BR4/OR4: PUMA Config
381	*
382	* Memory controller will be used in 2 modes:
383	*
384	* - "read" mode:
385	* BR4: 0x10100801 OR4: 0xffff8520
386	* - "load" mode (chip select on UPM B):
387	* BR4: 0x101004c1 OR4: 0xffff8600
388	*
389	* Default initialization is in "read" mode
390	*/
391	#define PUMA_CONF_BASE 0x10100000 /* PUMA Config */
392	#define PUMA_CONF_OR_AM 0xFFFF8000 /* 32 kB */
393	#define PUMA_CONF_LOAD_TIMING (OR_ACS_DIV2 \| OR_SCY_2_CLK)
394	#define PUMA_CONF_READ_TIMING (OR_G5LA \| OR_BI \| OR_SCY_2_CLK)
395
396	#define PUMA_CONF_BR_LOAD ((PUMA_CONF_BASE & BR_BA_MSK) \| \
397	BR_PS_8 \| BR_MS_UPMB \| BR_V)
398	#define PUMA_CONF_OR_LOAD (PUMA_CONF_OR_AM \| PUMA_CONF_LOAD_TIMING)
399
400	#define PUMA_CONF_BR_READ ((PUMA_CONF_BASE & BR_BA_MSK) \| BR_PS_16 \| BR_V)
401	#define PUMA_CONF_OR_READ (PUMA_CONF_OR_AM \| PUMA_CONF_READ_TIMING)
402
403	#define CFG_BR4_PRELIM PUMA_CONF_BR_READ
404	#define CFG_OR4_PRELIM PUMA_CONF_OR_READ
405
406	/*
407	* BR5/OR5: PUMA: SMA Bus 8 Bit
408	* BR5: 0x10200401 OR5: 0xffe0010a
409	*/
410	#define PUMA_SMA8_BASE 0x10200000 /* PUMA SMA Bus 8 Bit */
411	#define PUMA_SMA8_OR_AM 0xFFE00000 /* 2 MB */
412	#define PUMA_SMA8_TIMING (OR_BI \| OR_SCY_0_CLK \| OR_EHTR)
413
414	#define CFG_BR5_PRELIM ((PUMA_SMA8_BASE & BR_BA_MSK) \| BR_PS_8 \| BR_V)
415	#define CFG_OR5_PRELIM (PUMA_SMA8_OR_AM \| PUMA_SMA8_TIMING \| OR_SETA)
416
417	/*
418	* BR6/OR6: PUMA: SMA Bus 16 Bit
419	* BR6: 0x10600801 OR6: 0xffe0010a
420	*/
421	#define PUMA_SMA16_BASE 0x10600000 /* PUMA SMA Bus 16 Bit */
422	#define PUMA_SMA16_OR_AM 0xFFE00000 /* 2 MB */
423	#define PUMA_SMA16_TIMING (OR_BI \| OR_SCY_0_CLK \| OR_EHTR)
424
425	#define CFG_BR6_PRELIM ((PUMA_SMA16_BASE & BR_BA_MSK) \| BR_PS_16 \| BR_V)
426	#define CFG_OR6_PRELIM (PUMA_SMA16_OR_AM \| PUMA_SMA16_TIMING \| OR_SETA)
427
428	/*
429	* BR7/OR7: PUMA: external Flash
430	* BR7: 0x10a00801 OR7: 0xfe00010a
431	*/
432	#define PUMA_FLASH_BASE 0x10A00000 /* PUMA external Flash */
433	#define PUMA_FLASH_OR_AM 0xFE000000 /* 32 MB */
434	#define PUMA_FLASH_TIMING (OR_BI \| OR_SCY_0_CLK \| OR_EHTR)
435
436	#define CFG_BR7_PRELIM ((PUMA_FLASH_BASE & BR_BA_MSK) \| BR_PS_16 \| BR_V)
437	#define CFG_OR7_PRELIM (PUMA_FLASH_OR_AM \| PUMA_FLASH_TIMING \| OR_SETA)
438
439
440	/*
441	* Memory Periodic Timer Prescaler
442	*/
443
444	/* periodic timer for refresh */
445	#define CFG_MAMR_PTA 97 /* start with divider for 100 MHz */
446
447	/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */
448	#define CFG_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */
449	#define CFG_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */
450
451	/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */
452	#define CFG_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */
453	#define CFG_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */
454
455	/*
456	* MAMR settings for SDRAM
457	*/
458
459	/* 8 column SDRAM */
460	#define CFG_MAMR_8COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) \| MAMR_PTAE \| \
461	MAMR_AMA_TYPE_0 \| MAMR_DSA_1_CYCL \| MAMR_G0CLA_A11 \| \
462	MAMR_RLFA_1X \| MAMR_WLFA_1X \| MAMR_TLFA_4X)
463	/* 9 column SDRAM */
464	#define CFG_MAMR_9COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) \| MAMR_PTAE \| \
465	MAMR_AMA_TYPE_1 \| MAMR_DSA_1_CYCL \| MAMR_G0CLA_A10 \| \
466	MAMR_RLFA_1X \| MAMR_WLFA_1X \| MAMR_TLFA_4X)
467
468
469	/*
470	* Internal Definitions
471	*
472	* Boot Flags
473	*/
474	#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
475	#define BOOTFLAG_WARM 0x02 /* Software reboot */
476
477	#endif /* __CONFIG_H */