[people/ms/u-boot.git] / include / configs / ERIC.h

/*
 * (C) Copyright 2001
 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

/*
 * board/config.h - configuration options, board specific
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/*
 * High Level Configuration Options
 * (easy to change)
 */

#define CONFIG_405GP		1	/* This is a PPC405 CPU		*/
#define CONFIG_4xx		1	/* ...member of PPC4xx family	*/
#define CONFIG_ERIC		1	/* ...on a ERIC board	*/

#define	CONFIG_BOARD_PRE_INIT	1	/* run board_pre_init() */

#define CONFIG_SYS_CLK_FREQ	33333333 /* external frequency to pll	*/

#if 1
#define CFG_ENV_IS_IN_FLASH	1	/* use FLASH for environment vars	*/
#endif
#if 0
#define CFG_ENV_IS_IN_NVRAM	1	/* use NVRAM for environment vars	*/
#endif
#if 0
#define CFG_ENV_IS_IN_EEPROM	1	/* use I2C RTC X1240 for environment vars */
#define CFG_ENV_OFFSET		0x000	/* environment starts at the beginning of the EEPROM */
#define CFG_ENV_SIZE		0x800	/* 2048 bytes may be used for env vars */
#endif					/* total size of a X1240 is 2048 bytes */

#define CONFIG_HARD_I2C		1	/* I2C with hardware support */
#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
#define CFG_I2C_SLAVE		0x7F

#define CFG_I2C_EEPROM_ADDR	0x57	/* X1240 has two I2C slave addresses, one for EEPROM */
#define CFG_I2C_EEPROM_ADDR_LEN	2	/* address length for the eeprom */
#define CONFIG_I2C_RTC		1	/* we have a Xicor X1240 RTC */
#define CFG_I2C_RTC_ADDR	0x6F	/*                                and one for RTC */

#ifdef CFG_ENV_IS_IN_FLASH
#undef CFG_ENV_IS_IN_NVRAM
#undef CFG_ENV_IS_IN_EEPROM
#else
#ifdef CFG_ENV_IS_IN_NVRAM
#undef CFG_ENV_IS_IN_FLASH
#undef CFG_ENV_IS_IN_EEPROM
#else
#ifdef CFG_ENV_IS_IN_EEPROM
#undef CFG_ENV_IS_IN_NVRAM
#undef CFG_ENV_IS_IN_FLASH
#endif
#endif
#endif

#define CONFIG_BAUDRATE		115200
#define CONFIG_BOOTDELAY	3	/* autoboot after 3 seconds	*/

#if 1
#define CONFIG_BOOTCOMMAND	"bootm ffc00000" /* autoboot command	*/
#else
#define CONFIG_BOOTCOMMAND	"bootp" /* autoboot command		*/
#endif

#define CONFIG_BOOTARGS		"console=ttyS0,115200 root=/dev/nfs "	\
				"nfsroot=192.168.1.2:/eric_root_devel "	\
				"ip=192.168.1.22:192.168.1.2"

#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/

#define CONFIG_MII		1	/* MII PHY management		*/
#define CONFIG_PHY_ADDR		1	/* PHY address			*/

#define CONFIG_COMMANDS	       (CONFIG_CMD_DFL	| \
				CFG_CMD_PCI	| \
				CFG_CMD_IRQ	| \
				CFG_CMD_ENV	| \
				CFG_CMD_FLASH)

/*
 * #define CONFIG_COMMANDS	(CONFIG_CMD_DFL | CFG_CMD_PCI | CFG_CMD_IRQ | \
 *				 CFG_CMD_KGDB | CFG_CMD_I2C | CFG_CMD_EEPROM | \
 *				 CFG_CMD_ENV | CFG_CMD_FLASH)
 */

/* CFG_CMD_ENV est definie */
/*	((CONFIG_CMD_DFL | CFG_CMD_PCI | CFG_CMD_IRQ | CFG_CMD_KGDB) & ~(CFG_CMD_ENV))
 */
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>

#undef CONFIG_WATCHDOG			/* watchdog disabled		*/

/*
 * Miscellaneous configurable options
 */
#undef	CFG_LONGHELP			/* undef to save memory		*/
#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
#else
#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
#endif
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define CFG_MAXARGS	16		/* max number of command args	*/
#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/

#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/

#define	 CFG_EXT_SERIAL_CLOCK	 14318180

/* The following table includes the supported baudrates */
#define CFG_BAUDRATE_TABLE	\
	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
	 57600, 115200, 230400, 460800, 921600 }

#define CFG_LOAD_ADDR		0x100000	/* default load address */
#define CFG_EXTBDINFO		1	/* To use extended board_into (bd_t) */

#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */

/*-----------------------------------------------------------------------
 * PCI stuff
 *-----------------------------------------------------------------------
 */
#define PCI_HOST_ADAPTER 0              /* configure ar pci adapter     */
#define PCI_HOST_FORCE  1               /* configure as pci host        */
#define PCI_HOST_AUTO   2               /* detected via arbiter enable  */

#define CONFIG_PCI			/* include pci support	        */
#define CONFIG_PCI_HOST	PCI_HOST_FORCE  /* select pci host function     */
#undef  CONFIG_PCI_PNP			/* no pci plug-and-play         */
                                        /* resource configuration       */

#define CFG_PCI_SUBSYS_VENDORID 0x1743	/* PCI Vendor ID: Peppercon AG	*/
#define CFG_PCI_SUBSYS_DEVICEID 0x0405	/* PCI Device ID: 405GP		*/
#define CFG_PCI_PTM1LA	0xFFFC0000	/* point to flash		*/
#define CFG_PCI_PTM1MS	0xFFFFF001	/* 4kB, enable hard-wired to 1	*/
#define CFG_PCI_PTM1PCI 0x00000000      /* Host: use this pci address   */
#define CFG_PCI_PTM2LA	0x00000000	/* disabled			*/
#define CFG_PCI_PTM2MS	0x00000000	/* disabled			*/
#define CFG_PCI_PTM2PCI 0x04000000      /* Host: use this pci address   */

/*-----------------------------------------------------------------------
 * External peripheral base address
 *-----------------------------------------------------------------------
 */
/*	Bank 0 - Flash/SRAM	       0xFF000000 16MB	16 Bit */
/*	Bank 1 - NVRAM/RTC	       0xF0000000  1MB	 8 Bit */
/*	Bank 2 - A/D converter	       0xF0100000  1MB	 8 Bit */
/*	Bank 3 - Ethernet PHY Reset    0xF0200000  1MB	 8 Bit */
/*	Bank 4 - PC-MIP PRSNT1#	       0xF0300000  1MB	 8 Bit */
/*	Bank 5 - PC-MIP PRSNT2#	       0xF0400000  1MB	 8 Bit */
/*	Bank 6 - CPU LED0	       0xF0500000  1MB	 8 Bit */
/*	Bank 7 - CPU LED1	       0xF0600000  1MB	 8 Bit */

/* ----------------------------------------------------------------------- */
/*  Memory Bank 0 (Flash) initialization */
/* ----------------------------------------------------------------------- */
#define CS0_AP	0x9B015480
#define CS0_CR	0xFF87A000 /*  BAS=0xFF8,BS=(8MB),BU=0x3(R/W), BW=(16 bits) */
/* ----------------------------------------------------------------------- */
/*  Memory Bank 1 (NVRAM/RTC) initialization */
/* ----------------------------------------------------------------------- */
#define CS1_AP	0x02815480 /* WT=1, OEN=0x1,WBN=0x1,WBF=0x1,TH=0x2,RE=0, */
#define CS1_CR	0xF0018000 /* BAS=0xF00,BS=(1MB),BU=0x3(R/W), BW=(8 bits) */
 /* ----------------------------------------------------------------------- */
 /*  Memory Bank 2 (A/D converter) initialization */
 /* ----------------------------------------------------------------------- */
#define CS2_AP	0x02815480 /* WT=1, OEN=0x1,WBN=0x1,WBF=0x1,TH=0x2,RE=0, */
#define CS2_CR	0xF0118000 /* BAS=0xF01,BS=(1MB),BU=0x3(R/W), BW=(8 bits) */
/* ----------------------------------------------------------------------- */
/*  Memory Bank 3 (Ethernet PHY Reset) initialization */
/* ----------------------------------------------------------------------- */
#define CS3_AP	0x02815480 /* WT=1, OEN=0x1,WBN=0x1,WBF=0x1,TH=0x2,RE=0, */
#define CS3_CR	0xF0218000 /* BAS=0xF01,BS=(1MB),BU=0x3(R/W), BW=(8 bits) */
/* ----------------------------------------------------------------------- */
/*  Memory Bank 4 (PC-MIP PRSNT1#) initialization */
/* ----------------------------------------------------------------------- */
#define CS4_AP	0x02815480 /* WT=1, OEN=0x1,WBN=0x1,WBF=0x1,TH=0x2,RE=0, */
#define CS4_CR	0xF0318000 /* BAS=0xF01,BS=(1MB),BU=0x3(R/W), BW=(8 bits) */
/* ----------------------------------------------------------------------- */
/*  Memory Bank 5 (PC-MIP PRSNT2#) initialization */
/* ----------------------------------------------------------------------- */
#define CS5_AP	0x02815480 /* WT=1, OEN=0x1,WBN=0x1,WBF=0x1,TH=0x2,RE=0, */
#define CS5_CR	0xF0418000 /* BAS=0xF01,BS=(1MB),BU=0x3(R/W), BW=(8 bits) */
/* ----------------------------------------------------------------------- */
/*  Memory Bank 6 (CPU LED0) initialization */
/* ----------------------------------------------------------------------- */
#define CS6_AP	0x02815480 /* WT=1, OEN=0x1,WBN=0x1,WBF=0x1,TH=0x2,RE=0, */
#define CS6_CR	0xF0518000 /* BAS=0xF01,BS=(1MB),BU=0x3(R/W), BW=(8 bits) */
/* ----------------------------------------------------------------------- */
/*  Memory Bank 7 (CPU LED1) initialization */
/* ----------------------------------------------------------------------- */
#define CS7_AP	0x02815480 /* WT=1, OEN=0x1,WBN=0x1,WBF=0x1,TH=0x2,RE=0, */
#define CS7_CR	0xF0618000 /* BAS=0xF01,BS=(1MB),BU=0x3(R/W), BW=(8 bits) */

#define CFG_NVRAM_REG_BASE_ADDR	 0xF0000000
#define CFG_RTC_REG_BASE_ADDR	 (0xF0000000 + 0x7F8)
#define CFG_ADC_REG_BASE_ADDR	 0xF0100000
#define CFG_PHYRES_REG_BASE_ADDR 0xF0200000
#define CFG_PRSNT1_REG_BASE_ADDR 0xF0300000
#define CFG_PRSNT2_REG_BASE_ADDR 0xF0400000
#define CFG_LED0_REG_BASE_ADDR	 0xF0500000
#define CFG_LED1_REG_BASE_ADDR	 0xF0600000


/*  SDRAM CONFIG */
#define CFG_SDRAM_MANUALLY    1
#define CFG_SDRAM_SINGLE_BANK 1

#ifdef CFG_SDRAM_MANUALLY
/*-----------------------------------------------------------------------
 * Set MB0CF for bank 0. (0-32MB) Address Mode 4 since 12x8(2)
 *----------------------------------------------------------------------*/
#define MB0CF	0x00062001 /*  32MB @ 0 */
/*-----------------------------------------------------------------------
 * Set MB1CF for bank 1. (32MB-64MB) Address Mode 4 since 12x8(2)
 *----------------------------------------------------------------------*/
#ifdef CFG_SDRAM_SINGLE_BANK
#define MB1CF	0x0 /*  0MB @ 32MB */
#else
#define MB1CF	0x02062001 /*  32MB @ 32MB */
#endif
/*-----------------------------------------------------------------------
 * Set MB2CF for bank 2. off
 *----------------------------------------------------------------------*/
#define MB2CF	0x0 /*  0MB */
/*-----------------------------------------------------------------------
 * Set MB3CF for bank 3. off
 *----------------------------------------------------------------------*/
#define MB3CF	0x0 /*  0MB */

#define SDTR_100    0x0086400D
#define RTR_100     0x05F0
#define SDTR_66     0x00854006	/* orig U-Boot-wallnut says 0x00854006 */
#define RTR_66      0x03f8

#endif   /* CFG_SDRAM_MANUALLY */


/*-----------------------------------------------------------------------
 * Start addresses for the final memory configuration
 * (Set up by the startup code)
 * Please note that CFG_SDRAM_BASE _must_ start at 0
 */
#define CFG_SDRAM_BASE		0x00000000
#define CFG_SDRAM_SIZE		32
#define CFG_FLASH_BASE		0xFF800000      /* 8 MByte Flash */
#define CFG_MONITOR_BASE	0xFFFE0000      /* last 128kByte within Flash */
/*#define CFG_MONITOR_LEN		(192 * 1024)*/	/* Reserve 196 kB for Monitor	*/
#define CFG_MONITOR_LEN		(128 * 1024)	/* Reserve 128 kB for Monitor	*/
#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 8 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization.
 */
#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
/*-----------------------------------------------------------------------
 * FLASH organization
 */
#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
#define CFG_MAX_FLASH_SECT	64	/* max number of sectors on one chip	*/
#define CFG_FLASH_16BIT		1	/* Rom 16 bit data bus			*/

#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/

/* BEG ENVIRONNEMENT FLASH */
#ifdef CFG_ENV_IS_IN_FLASH
#define CFG_ENV_SECT_SIZE       (128*1024)

#if 0  /* force ENV to be NOT embedded */
#define CFG_ENV_ADDR            0xfffa0000
#else  /* force ENV to be embedded */
#define	CFG_ENV_SIZE		(2 * 1024) /* Total Size of Environment Sector 2k */
#define CFG_ENV_ADDR            (CFG_MONITOR_BASE + CFG_MONITOR_LEN - CFG_ENV_SIZE - 0x10) /* let space for reset vector */
/* #define CFG_ENV_ADDR            (CFG_MONITOR_BASE)*/
#define CFG_ENV_OFFSET          (CFG_ENV_ADDR - CFG_FLASH_BASE)
#endif

#endif
/* END ENVIRONNEMENT FLASH */
/*-----------------------------------------------------------------------
 * NVRAM organization
 */
#define CFG_NVRAM_BASE_ADDR	CFG_NVRAM_REG_BASE_ADDR	/* NVRAM base address	*/
#define CFG_NVRAM_SIZE		0x7F8		/* NVRAM size 2kByte - 8 Byte for RTC */

#ifdef CFG_ENV_IS_IN_NVRAM
#define CFG_ENV_SIZE		0x7F8		/* Size of Environment vars	*/
#define CFG_ENV_ADDR		\
	(CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE)	/* Env	*/
#endif
/*-----------------------------------------------------------------------
 * Cache Configuration
 */
#define CFG_DCACHE_SIZE		8192	/* For IBM 405 CPUs			*/
#define CFG_CACHELINE_SIZE	32	/* ...			*/
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
#endif

/*
 * Init Memory Controller:
 *
 * BR0/1 and OR0/1 (FLASH)
 */

#define FLASH_BASE0_PRELIM	0xFF800000	/* FLASH bank #0 8MB 	*/
#define FLASH_BASE1_PRELIM	0		/* FLASH bank #1	*/


/* Configuration Port location */
/*  #define CONFIG_PORT_ADDR	0xF0000500 */

/*-----------------------------------------------------------------------
 * Definitions for initial stack pointer and data area (in DPRAM)
 */
#define CFG_INIT_RAM_ADDR	0x00df0000  /* inside of SDRAM		       */
#define CFG_INIT_RAM_END	0x0f00	/* End of used area in RAM	       */
#define CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET

/*-----------------------------------------------------------------------
 * Definitions for Serial Presence Detect EEPROM address
 * (to get SDRAM settings)
 */
#define SPD_EEPROM_ADDRESS      0x50

/*
 * Internal Definitions
 *
 * Boot Flags
 */
#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
#define BOOTFLAG_WARM	0x02		/* Software reboot			*/

#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
#endif
#endif	/* __CONFIG_H */
Commit	Line	Data
e2211743 WD	1	/*
	2	* (C) Copyright 2001
	3	* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
	4	*
	5	* See file CREDITS for list of people who contributed to this
	6	* project.
	7	*
	8	* This program is free software; you can redistribute it and/or
	9	* modify it under the terms of the GNU General Public License as
	10	* published by the Free Software Foundation; either version 2 of
	11	* the License, or (at your option) any later version.
	12	*
	13	* This program is distributed in the hope that it will be useful,
	14	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	15	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	16	* GNU General Public License for more details.
	17	*
	18	* You should have received a copy of the GNU General Public License
	19	* along with this program; if not, write to the Free Software
	20	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	21	* MA 02111-1307 USA
	22	*/
	23
	24	/*
	25	* board/config.h - configuration options, board specific
	26	*/
	27
	28	#ifndef __CONFIG_H
	29	#define __CONFIG_H
	30
	31	/*
	32	* High Level Configuration Options
	33	* (easy to change)
	34	*/
	35
	36	#define CONFIG_405GP 1 /* This is a PPC405 CPU */
	37	#define CONFIG_4xx 1 /* ...member of PPC4xx family */
	38	#define CONFIG_ERIC 1 /* ...on a ERIC board */
	39
	40	#define CONFIG_BOARD_PRE_INIT 1 /* run board_pre_init() */
	41
	42	#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */
	43
	44	#if 1
	45	#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
	46	#endif
	47	#if 0
	48	#define CFG_ENV_IS_IN_NVRAM 1 /* use NVRAM for environment vars */
	49	#endif
	50	#if 0
	51	#define CFG_ENV_IS_IN_EEPROM 1 /* use I2C RTC X1240 for environment vars */
	52	#define CFG_ENV_OFFSET 0x000 /* environment starts at the beginning of the EEPROM */
	53	#define CFG_ENV_SIZE 0x800 /* 2048 bytes may be used for env vars */
	54	#endif /* total size of a X1240 is 2048 bytes */
	55
	56	#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
	57	#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
	58	#define CFG_I2C_SLAVE 0x7F
	59
	60	#define CFG_I2C_EEPROM_ADDR 0x57 /* X1240 has two I2C slave addresses, one for EEPROM */
	61	#define CFG_I2C_EEPROM_ADDR_LEN 2 /* address length for the eeprom */
	62	#define CONFIG_I2C_RTC 1 /* we have a Xicor X1240 RTC */
	63	#define CFG_I2C_RTC_ADDR 0x6F /* and one for RTC */
	64
65	#ifdef CFG_ENV_IS_IN_FLASH
66	#undef CFG_ENV_IS_IN_NVRAM
67	#undef CFG_ENV_IS_IN_EEPROM
68	#else
69	#ifdef CFG_ENV_IS_IN_NVRAM
70	#undef CFG_ENV_IS_IN_FLASH
71	#undef CFG_ENV_IS_IN_EEPROM
72	#else
73	#ifdef CFG_ENV_IS_IN_EEPROM
74	#undef CFG_ENV_IS_IN_NVRAM
75	#undef CFG_ENV_IS_IN_FLASH
76	#endif
77	#endif
78	#endif
79
80	#define CONFIG_BAUDRATE 115200
81	#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */
82
83	#if 1
84	#define CONFIG_BOOTCOMMAND "bootm ffc00000" /* autoboot command */
85	#else
86	#define CONFIG_BOOTCOMMAND "bootp" /* autoboot command */
87	#endif
88
89	#define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/nfs " \
90	"nfsroot=192.168.1.2:/eric_root_devel " \
91	"ip=192.168.1.22:192.168.1.2"
92
93	#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
94	#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
95
96	#define CONFIG_MII 1 /* MII PHY management */
97	#define CONFIG_PHY_ADDR 1 /* PHY address */
98
99	#define CONFIG_COMMANDS (CONFIG_CMD_DFL \| \
100	CFG_CMD_PCI \| \
101	CFG_CMD_IRQ \| \
102	CFG_CMD_ENV \| \
103	CFG_CMD_FLASH)
104
105	/*
106	* #define CONFIG_COMMANDS (CONFIG_CMD_DFL \| CFG_CMD_PCI \| CFG_CMD_IRQ \| \
107	* CFG_CMD_KGDB \| CFG_CMD_I2C \| CFG_CMD_EEPROM \| \
108	* CFG_CMD_ENV \| CFG_CMD_FLASH)
109	*/
110
111	/* CFG_CMD_ENV est definie */
112	/* ((CONFIG_CMD_DFL \| CFG_CMD_PCI \| CFG_CMD_IRQ \| CFG_CMD_KGDB) & ~(CFG_CMD_ENV))
113	*/
114	/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
115	#include <cmd_confdefs.h>
116
117	#undef CONFIG_WATCHDOG /* watchdog disabled */
118
119	/*
120	* Miscellaneous configurable options
121	*/
122	#undef CFG_LONGHELP /* undef to save memory */
123	#define CFG_PROMPT "=> " /* Monitor Command Prompt */
124	#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
125	#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
126	#else
127	#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
128	#endif
129	#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
130	#define CFG_MAXARGS 16 /* max number of command args */
131	#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
132
133	#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
134	#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
135
136	#define CFG_EXT_SERIAL_CLOCK 14318180
137
138	/* The following table includes the supported baudrates */
139	#define CFG_BAUDRATE_TABLE \
140	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, \
141	57600, 115200, 230400, 460800, 921600 }
142
143	#define CFG_LOAD_ADDR 0x100000 /* default load address */
144	#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
145
146	#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
147
148	/*-----------------------------------------------------------------------
149	* PCI stuff
150	*-----------------------------------------------------------------------
151	*/
152	#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */
153	#define PCI_HOST_FORCE 1 /* configure as pci host */
154	#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
155
156	#define CONFIG_PCI /* include pci support */
157	#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */
158	#undef CONFIG_PCI_PNP /* no pci plug-and-play */
159	/* resource configuration */
160
161	#define CFG_PCI_SUBSYS_VENDORID 0x1743 /* PCI Vendor ID: Peppercon AG */
162	#define CFG_PCI_SUBSYS_DEVICEID 0x0405 /* PCI Device ID: 405GP */
163	#define CFG_PCI_PTM1LA 0xFFFC0000 /* point to flash */
164	#define CFG_PCI_PTM1MS 0xFFFFF001 /* 4kB, enable hard-wired to 1 */
165	#define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
166	#define CFG_PCI_PTM2LA 0x00000000 /* disabled */
167	#define CFG_PCI_PTM2MS 0x00000000 /* disabled */
168	#define CFG_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */
169
170	/*-----------------------------------------------------------------------
171	* External peripheral base address
172	*-----------------------------------------------------------------------
173	*/
174	/* Bank 0 - Flash/SRAM 0xFF000000 16MB 16 Bit */
175	/* Bank 1 - NVRAM/RTC 0xF0000000 1MB 8 Bit */
176	/* Bank 2 - A/D converter 0xF0100000 1MB 8 Bit */
177	/* Bank 3 - Ethernet PHY Reset 0xF0200000 1MB 8 Bit */
178	/* Bank 4 - PC-MIP PRSNT1# 0xF0300000 1MB 8 Bit */
179	/* Bank 5 - PC-MIP PRSNT2# 0xF0400000 1MB 8 Bit */
180	/* Bank 6 - CPU LED0 0xF0500000 1MB 8 Bit */
181	/* Bank 7 - CPU LED1 0xF0600000 1MB 8 Bit */
182
183	/* ----------------------------------------------------------------------- */
184	/* Memory Bank 0 (Flash) initialization */
185	/* ----------------------------------------------------------------------- */
186	#define CS0_AP 0x9B015480
187	#define CS0_CR 0xFF87A000 /* BAS=0xFF8,BS=(8MB),BU=0x3(R/W), BW=(16 bits) */
188	/* ----------------------------------------------------------------------- */
189	/* Memory Bank 1 (NVRAM/RTC) initialization */
190	/* ----------------------------------------------------------------------- */
191	#define CS1_AP 0x02815480 /* WT=1, OEN=0x1,WBN=0x1,WBF=0x1,TH=0x2,RE=0, */
192	#define CS1_CR 0xF0018000 /* BAS=0xF00,BS=(1MB),BU=0x3(R/W), BW=(8 bits) */
193	/* ----------------------------------------------------------------------- */
194	/* Memory Bank 2 (A/D converter) initialization */
195	/* ----------------------------------------------------------------------- */
196	#define CS2_AP 0x02815480 /* WT=1, OEN=0x1,WBN=0x1,WBF=0x1,TH=0x2,RE=0, */
197	#define CS2_CR 0xF0118000 /* BAS=0xF01,BS=(1MB),BU=0x3(R/W), BW=(8 bits) */
198	/* ----------------------------------------------------------------------- */
199	/* Memory Bank 3 (Ethernet PHY Reset) initialization */
200	/* ----------------------------------------------------------------------- */
201	#define CS3_AP 0x02815480 /* WT=1, OEN=0x1,WBN=0x1,WBF=0x1,TH=0x2,RE=0, */
202	#define CS3_CR 0xF0218000 /* BAS=0xF01,BS=(1MB),BU=0x3(R/W), BW=(8 bits) */
203	/* ----------------------------------------------------------------------- */
204	/* Memory Bank 4 (PC-MIP PRSNT1#) initialization */
205	/* ----------------------------------------------------------------------- */
206	#define CS4_AP 0x02815480 /* WT=1, OEN=0x1,WBN=0x1,WBF=0x1,TH=0x2,RE=0, */
207	#define CS4_CR 0xF0318000 /* BAS=0xF01,BS=(1MB),BU=0x3(R/W), BW=(8 bits) */
208	/* ----------------------------------------------------------------------- */
209	/* Memory Bank 5 (PC-MIP PRSNT2#) initialization */
210	/* ----------------------------------------------------------------------- */
211	#define CS5_AP 0x02815480 /* WT=1, OEN=0x1,WBN=0x1,WBF=0x1,TH=0x2,RE=0, */
212	#define CS5_CR 0xF0418000 /* BAS=0xF01,BS=(1MB),BU=0x3(R/W), BW=(8 bits) */
213	/* ----------------------------------------------------------------------- */
214	/* Memory Bank 6 (CPU LED0) initialization */
215	/* ----------------------------------------------------------------------- */
216	#define CS6_AP 0x02815480 /* WT=1, OEN=0x1,WBN=0x1,WBF=0x1,TH=0x2,RE=0, */
217	#define CS6_CR 0xF0518000 /* BAS=0xF01,BS=(1MB),BU=0x3(R/W), BW=(8 bits) */
218	/* ----------------------------------------------------------------------- */
219	/* Memory Bank 7 (CPU LED1) initialization */
220	/* ----------------------------------------------------------------------- */
221	#define CS7_AP 0x02815480 /* WT=1, OEN=0x1,WBN=0x1,WBF=0x1,TH=0x2,RE=0, */
222	#define CS7_CR 0xF0618000 /* BAS=0xF01,BS=(1MB),BU=0x3(R/W), BW=(8 bits) */
223
224	#define CFG_NVRAM_REG_BASE_ADDR 0xF0000000
225	#define CFG_RTC_REG_BASE_ADDR (0xF0000000 + 0x7F8)
226	#define CFG_ADC_REG_BASE_ADDR 0xF0100000
227	#define CFG_PHYRES_REG_BASE_ADDR 0xF0200000
228	#define CFG_PRSNT1_REG_BASE_ADDR 0xF0300000
229	#define CFG_PRSNT2_REG_BASE_ADDR 0xF0400000
230	#define CFG_LED0_REG_BASE_ADDR 0xF0500000
231	#define CFG_LED1_REG_BASE_ADDR 0xF0600000
232
233
234	/* SDRAM CONFIG */
235	#define CFG_SDRAM_MANUALLY 1
236	#define CFG_SDRAM_SINGLE_BANK 1
237
238	#ifdef CFG_SDRAM_MANUALLY
239	/*-----------------------------------------------------------------------
240	* Set MB0CF for bank 0. (0-32MB) Address Mode 4 since 12x8(2)
241	----------------------------------------------------------------------/
242	#define MB0CF 0x00062001 /* 32MB @ 0 */
243	/*-----------------------------------------------------------------------
244	* Set MB1CF for bank 1. (32MB-64MB) Address Mode 4 since 12x8(2)
245	----------------------------------------------------------------------/
246	#ifdef CFG_SDRAM_SINGLE_BANK
247	#define MB1CF 0x0 /* 0MB @ 32MB */
248	#else
249	#define MB1CF 0x02062001 /* 32MB @ 32MB */
250	#endif
251	/*-----------------------------------------------------------------------
252	* Set MB2CF for bank 2. off
253	----------------------------------------------------------------------/
254	#define MB2CF 0x0 /* 0MB */
255	/*-----------------------------------------------------------------------
256	* Set MB3CF for bank 3. off
257	----------------------------------------------------------------------/
258	#define MB3CF 0x0 /* 0MB */
259
260	#define SDTR_100 0x0086400D
261	#define RTR_100 0x05F0
262	#define SDTR_66 0x00854006 /* orig U-Boot-wallnut says 0x00854006 */
263	#define RTR_66 0x03f8
264
265	#endif /* CFG_SDRAM_MANUALLY */
266
267
268	/*-----------------------------------------------------------------------
269	* Start addresses for the final memory configuration
270	* (Set up by the startup code)
271	* Please note that CFG_SDRAM_BASE _must_ start at 0
272	*/
273	#define CFG_SDRAM_BASE 0x00000000
274	#define CFG_SDRAM_SIZE 32
275	#define CFG_FLASH_BASE 0xFF800000 /* 8 MByte Flash */
276	#define CFG_MONITOR_BASE 0xFFFE0000 /* last 128kByte within Flash */
277	/#define CFG_MONITOR_LEN (192 1024)/ / Reserve 196 kB for Monitor */
278	#define CFG_MONITOR_LEN (128 * 1024) /* Reserve 128 kB for Monitor */
279	#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
280
281	/*
282	* For booting Linux, the board info and command line data
283	* have to be in the first 8 MB of memory, since this is
284	* the maximum mapped by the Linux kernel during initialization.
285	*/
286	#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
287	/*-----------------------------------------------------------------------
288	* FLASH organization
289	*/
290	#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
291	#define CFG_MAX_FLASH_SECT 64 /* max number of sectors on one chip */
292	#define CFG_FLASH_16BIT 1 /* Rom 16 bit data bus */
293
294	#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
295	#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
296
297	/* BEG ENVIRONNEMENT FLASH */
298	#ifdef CFG_ENV_IS_IN_FLASH
299	#define CFG_ENV_SECT_SIZE (128*1024)
300
301	#if 0 /* force ENV to be NOT embedded */
302	#define CFG_ENV_ADDR 0xfffa0000
303	#else /* force ENV to be embedded */
304	#define CFG_ENV_SIZE (2 * 1024) /* Total Size of Environment Sector 2k */
305	#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN - CFG_ENV_SIZE - 0x10) /* let space for reset vector */
306	/* #define CFG_ENV_ADDR (CFG_MONITOR_BASE)*/
307	#define CFG_ENV_OFFSET (CFG_ENV_ADDR - CFG_FLASH_BASE)
308	#endif
309
310	#endif
311	/* END ENVIRONNEMENT FLASH */
312	/*-----------------------------------------------------------------------
313	* NVRAM organization
314	*/
315	#define CFG_NVRAM_BASE_ADDR CFG_NVRAM_REG_BASE_ADDR /* NVRAM base address */
316	#define CFG_NVRAM_SIZE 0x7F8 /* NVRAM size 2kByte - 8 Byte for RTC */
317
318	#ifdef CFG_ENV_IS_IN_NVRAM
319	#define CFG_ENV_SIZE 0x7F8 /* Size of Environment vars */
320	#define CFG_ENV_ADDR \
321	(CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE) /* Env */
322	#endif
323	/*-----------------------------------------------------------------------
324	* Cache Configuration
325	*/
326	#define CFG_DCACHE_SIZE 8192 /* For IBM 405 CPUs */
327	#define CFG_CACHELINE_SIZE 32 /* ... */
328	#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
329	#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
330	#endif
331
332	/*
333	* Init Memory Controller:
334	*
335	* BR0/1 and OR0/1 (FLASH)
336	*/
337
338	#define FLASH_BASE0_PRELIM 0xFF800000 /* FLASH bank #0 8MB */
339	#define FLASH_BASE1_PRELIM 0 /* FLASH bank #1 */
340
341
342	/* Configuration Port location */
343	/* #define CONFIG_PORT_ADDR 0xF0000500 */
344
345	/*-----------------------------------------------------------------------
346	* Definitions for initial stack pointer and data area (in DPRAM)
347	*/
348	#define CFG_INIT_RAM_ADDR 0x00df0000 /* inside of SDRAM */
349	#define CFG_INIT_RAM_END 0x0f00 /* End of used area in RAM */
350	#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
351	#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
352	#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
353
354	/*-----------------------------------------------------------------------
355	* Definitions for Serial Presence Detect EEPROM address
356	* (to get SDRAM settings)
357	*/
358	#define SPD_EEPROM_ADDRESS 0x50
359
360	/*
361	* Internal Definitions
362	*
363	* Boot Flags
364	*/
365	#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
366	#define BOOTFLAG_WARM 0x02 /* Software reboot */
367
368	#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
369	#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
370	#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
371	#endif
372	#endif /* __CONFIG_H */