[people/ms/u-boot.git] / include / configs / G2000.h

/*
 * (C) Copyright 2004
 * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

/*
 * board/config.h - configuration options, board specific
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/*
 * High Level Configuration Options
 * (easy to change)
 */

#define CONFIG_405EP		1	/* This is a PPC405 CPU		*/
#define CONFIG_4xx		1	/* ...member of PPC4xx family	*/
#define CONFIG_G2000		1	/* ...on a PLU405 board		*/

#define CONFIG_BOARD_EARLY_INIT_F 1	/* call board_early_init_f()	*/
#define CONFIG_MISC_INIT_R	1	/* call misc_init_r()		*/

#define CONFIG_SYS_CLK_FREQ     33333333 /* external frequency to pll   */

#if 0 /* test-only */
#define CONFIG_BAUDRATE		115200
#else
#define CONFIG_BAUDRATE		9600
#endif

#define CONFIG_PREBOOT

#undef	CONFIG_BOOTARGS

#define	CONFIG_EXTRA_ENV_SETTINGS					\
	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
		"nfsroot=${serverip}:${rootpath}\0"			\
	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
	"addip=setenv bootargs ${bootargs} "				\
		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
		":${hostname}:${netdev}:off\0"				\
	"addmisc=setenv bootargs ${bootargs} "				\
		"console=ttyS0,${baudrate} "				\
		"panic=1\0"						\
	"flash_nfs=run nfsargs addip addmisc;"				\
		"bootm ${kernel_addr}\0"				\
	"flash_self=run ramargs addip addmisc;"				\
		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
	"net_nfs=tftp 200000 ${bootfile};"				\
		"run nfsargs addip addmisc;bootm\0"			\
	"rootpath=/opt/eldk/ppc_4xx\0"					\
	"bootfile=/tftpboot/g2000/pImage\0"				\
	"kernel_addr=ff800000\0"				        \
	"ramdisk_addr=ff900000\0"				        \
	"pciconfighost=yes\0"				                \
	""
#define CONFIG_BOOTCOMMAND	"run net_nfs"

#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/

#define CONFIG_NET_MULTI	1

#define CONFIG_PPC4xx_EMAC
#define CONFIG_MII		1	/* MII PHY management		*/
#define CONFIG_PHY_ADDR		0	/* PHY address			*/
#define CONFIG_PHY1_ADDR	1	/* PHY address			*/

#if 0 /* test-only */
#define CONFIG_PHY_CLK_FREQ	EMAC_STACR_CLK_66MHZ /* 66 MHz OPB clock*/
#endif


/*
 * BOOTP options
 */
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME


/*
 * Command line configuration.
 */
#include <config_cmd_default.h>

#define CONFIG_CMD_DHCP
#define CONFIG_CMD_PCI
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_ELF
#define CONFIG_CMD_DATE
#define CONFIG_CMD_I2C
#define CONFIG_CMD_MII
#define CONFIG_CMD_PING
#define CONFIG_CMD_BSP
#define CONFIG_CMD_EEPROM


#undef	CONFIG_WATCHDOG			/* watchdog disabled		*/

#if 0 /* test-only */
#define CONFIG_SDRAM_BANK0	1	/* init onboard SDRAM bank 0	*/
#endif

/*
 * Miscellaneous configurable options
 */
#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/

#undef	CONFIG_SYS_HUSH_PARSER			/* use "hush" command parser	*/
#ifdef	CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
#endif

#if defined(CONFIG_CMD_KGDB)
#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
#else
#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
#endif
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/

#define CONFIG_SYS_DEVICE_NULLDEV	1	/* include nulldev device	*/

#define CONFIG_SYS_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/

#define CONFIG_AUTO_COMPLETE	1       /* add autocompletion support   */

#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/

#undef	CONFIG_SYS_EXT_SERIAL_CLOCK	       /* no external serial clock used */
#define CONFIG_SYS_BASE_BAUD	    691200
#undef	CONFIG_UART1_CONSOLE		/* define for uart1 as console	*/

/* The following table includes the supported baudrates */
#define CONFIG_SYS_BAUDRATE_TABLE	\
	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
	 57600, 115200, 230400, 460800, 921600 }

#define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
#define CONFIG_SYS_EXTBDINFO	1		/* To use extended board_into (bd_t) */

#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */

#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
#define CONFIG_BOOTDELAY	3	/* autoboot after 3 seconds	*/

#define CONFIG_VERSION_VARIABLE 1	/* include version env variable */

#define CONFIG_SYS_RX_ETH_BUFFER	16	/* use 16 rx buffer on 405 emac */

/*----------------------------------------------------------------------------*/
/* adding Ethernet setting:  FTS OUI 00:11:0B */
/*----------------------------------------------------------------------------*/
#define CONFIG_ETHADDR          00:11:0B:00:00:01
#define CONFIG_HAS_ETH1
#define CONFIG_ETH1ADDR         00:11:0B:00:00:02
#define CONFIG_IPADDR		10.48.8.178
#define CONFIG_IP1ADDR		10.48.8.188
#define CONFIG_NETMASK		255.255.255.128
#define CONFIG_SERVERIP		10.48.8.138

/*-----------------------------------------------------------------------
 * RTC stuff
 *-----------------------------------------------------------------------
 */
#define CONFIG_RTC_DS1337
#define CONFIG_SYS_I2C_RTC_ADDR	0x68

#if 0 /* test-only */
/*-----------------------------------------------------------------------
 * NAND-FLASH stuff
 *-----------------------------------------------------------------------
 */
#define CONFIG_SYS_MAX_NAND_DEVICE	1	/* Max number of NAND devices		*/

#define CONFIG_SYS_NAND_CE  (0x80000000 >> 1)	/* our CE is GPIO1 */
#define CONFIG_SYS_NAND_CLE (0x80000000 >> 2)	/* our CLE is GPIO2 */
#define CONFIG_SYS_NAND_ALE (0x80000000 >> 3)	/* our ALE is GPIO3 */
#define CONFIG_SYS_NAND_RDY (0x80000000 >> 4)	/* our RDY is GPIO4 */

#endif

/*-----------------------------------------------------------------------
 * PCI stuff
 *-----------------------------------------------------------------------
 */
#define PCI_HOST_ADAPTER 0              /* configure as pci adapter     */
#define PCI_HOST_FORCE  1               /* configure as pci host        */
#define PCI_HOST_AUTO   2               /* detected via arbiter enable  */

#define CONFIG_PCI			/* include pci support	        */
#define CONFIG_PCI_HOST	PCI_HOST_HOST   /* select pci host function     */
#define CONFIG_PCI_PNP			/* do pci plug-and-play         */
					/* resource configuration       */

#define CONFIG_PCI_SCAN_SHOW            /* print pci devices @ startup  */

#define CONFIG_PCI_CONFIG_HOST_BRIDGE 1 /* don't skip host bridge config*/

#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x12FE  /* PCI Vendor ID: esd gmbh      */
#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0405  /* PCI Device ID: CPCI-405      */
#define CONFIG_SYS_PCI_CLASSCODE       0x0b20  /* PCI Class Code: Processor/PPC*/
#define CONFIG_SYS_PCI_PTM1LA  0x00000000      /* point to sdram               */
#define CONFIG_SYS_PCI_PTM1MS  0xfc000001      /* 64MB, enable hard-wired to 1 */
#define CONFIG_SYS_PCI_PTM1PCI 0x00000000      /* Host: use this pci address   */
#define CONFIG_SYS_PCI_PTM2LA  0xffc00000      /* point to flash               */
#define CONFIG_SYS_PCI_PTM2MS  0xffc00001      /* 4MB, enable                  */
#define CONFIG_SYS_PCI_PTM2PCI 0x04000000      /* Host: use this pci address   */

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 8 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization.
 */
#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */

/*-----------------------------------------------------------------------
 * FLASH organization
 */
#if 0 /* APC405 */
#define CONFIG_SYS_FLASH_CFI		1	/* Flash is CFI conformant		*/
#define CONFIG_SYS_MAX_FLASH_SECT	128	/* max number of sectors on one chip	*/
#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
#undef CONFIG_SYS_FLASH_PROTECTION		/* don't use hardware protection	*/
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
#define CONFIG_SYS_FLASH_BASE		0xFE000000 /* test-only...*/
#define CONFIG_SYS_FLASH_INCREMENT	0x01000000 /* test-only */
#else /* G2000 */
#define CONFIG_SYS_FLASH_CFI		1	/* Flash is CFI conformant		*/
#define CONFIG_SYS_MAX_FLASH_SECT	128	/* max number of sectors on one chip	*/
#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
#undef CONFIG_SYS_FLASH_PROTECTION		/* don't use hardware protection	*/
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
#define CONFIG_SYS_FLASH_BASE		0xFF800000 /* test-only...*/
#define CONFIG_SYS_FLASH_INCREMENT	0x01000000 /* test-only */
#endif

#define CONFIG_SYS_FLASH_EMPTY_INFO            /* print 'E' for empty sector on flinfo */

#define CONFIG_SYS_JFFS2_FIRST_BANK    0           /* use for JFFS2 */
#define CONFIG_SYS_JFFS2_NUM_BANKS     1           /* ! second bank contains u-boot    */

/*-----------------------------------------------------------------------
 * Start addresses for the final memory configuration
 * (Set up by the startup code)
 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 */
#define CONFIG_SYS_SDRAM_BASE		0x00000000
#define CONFIG_SYS_MONITOR_BASE	0xFFFC0000
#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Monitor	*/
#define CONFIG_SYS_MALLOC_LEN		(256 * 1024)	/* Reserve 256 kB for malloc()	*/

/*-----------------------------------------------------------------------
 * Environment Variable setup
 */
#if 1 /* test-only */
#define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
#define CONFIG_ENV_OFFSET		0x100	/* environment starts at the beginning of the EEPROM */
#define CONFIG_ENV_SIZE		0x700	/* 2048 bytes may be used for env vars*/
				   /* total size of a CAT24WC16 is 2048 bytes */

#else	/* DEFAULT: environment in flash, using redundand flash sectors */

#define CONFIG_ENV_IS_IN_FLASH	1	/* use FLASH for environment vars */
#define CONFIG_ENV_ADDR		0xFFFA0000 /* environment starts before u-boot */
#define CONFIG_ENV_SECT_SIZE	0x20000	/* 128k bytes may be used for env vars*/

#endif

/*-----------------------------------------------------------------------
 * I2C EEPROM (CAT24WC16) for environment
 */
#define CONFIG_HARD_I2C			/* I2c with hardware support */
#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE		0x7F

#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT24WC08		*/
/* CAT24WC08/16... */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
/* mask of address bits that overflow into the "EEPROM chip address"	*/
#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW	0x07
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4	/* The Catalyst CAT24WC08 has	*/
					/* 16 byte page write mode using*/
					/* last 4 bits of the address	*/
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */

/*-----------------------------------------------------------------------
 * External Bus Controller (EBC) Setup
 */

/* Memory Bank 0 (Intel Strata Flash) initialization                            */
#define CONFIG_SYS_EBC_PB0AP   0x92015480
#define CONFIG_SYS_EBC_PB0CR   0xFF87A000          /* BAS=0xFF8,BS=08MB,BU=R/W,BW=16bit*/

/* Memory Bank 1 ( Power TAU) initialization               */
/* #define CONFIG_SYS_EBC_PB1AP           0x04041000 */
/* #define CONFIG_SYS_EBC_PB1CR           0xF0018000   */  /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit  */
#define CONFIG_SYS_EBC_PB1AP           0x00000000
#define CONFIG_SYS_EBC_PB1CR           0x00000000

/* Memory Bank 2 (Intel Flash) initialization                 */
#define CONFIG_SYS_EBC_PB2AP           0x00000000
#define CONFIG_SYS_EBC_PB2CR           0x00000000

/* Memory Bank 3 (NAND) initialization                        */
#define CONFIG_SYS_EBC_PB3AP           0x92015480
#define CONFIG_SYS_EBC_PB3CR           0xF40B8000  /*addr 0xF40, BS=32M,BU=R/W, BW=8bit */

/* Memory Bank 4 (FPGA regs) initialization                                     */
#define CONFIG_SYS_EBC_PB4AP           0x00000000
#define CONFIG_SYS_EBC_PB4CR           0x00000000  /* leave it blank  */

#define CONFIG_SYS_NAND_BASE   0xF4000000

/*-----------------------------------------------------------------------
 * Definitions for initial stack pointer and data area (in data cache)
 */
/* use on chip memory ( OCM ) for temperary stack until sdram is tested */
#define CONFIG_SYS_TEMP_STACK_OCM	  1

/* On Chip Memory location */
#define CONFIG_SYS_OCM_DATA_ADDR	0xF8000000
#define CONFIG_SYS_OCM_DATA_SIZE	0x1000
#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM		*/
#define CONFIG_SYS_INIT_RAM_END	CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM	*/

#define CONFIG_SYS_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
#define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET

/*-----------------------------------------------------------------------
 * Definitions for GPIO setup (PPC405EP specific)
 *
 * GPIO0[0]     - External Bus Controller BLAST output
 * GPIO0[1-9]   - Instruction trace outputs
 * GPIO0[10-13] - External Bus Controller CS_1 - CS_4 outputs
 * GPIO0[14-16] - External Bus Controller ABUS3-ABUS5 outputs
 * GPIO0[17-23] - External Interrupts IRQ0 - IRQ6 inputs
 * GPIO0[24-27] - UART0 control signal inputs/outputs
 * GPIO0[28-29] - UART1 data signal input/output
 * GPIO0[30-31] - EMAC0 and EMAC1 reject packet inputs
 *
 * following GPIO setting changed for G20000, 080304
 */
#define CONFIG_SYS_GPIO0_OSRH          0x40005555
#define CONFIG_SYS_GPIO0_OSRL          0x40000110
#define CONFIG_SYS_GPIO0_ISR1H         0x00000000
#define CONFIG_SYS_GPIO0_ISR1L         0x15555445
#define CONFIG_SYS_GPIO0_TSRH          0x00000000
#define CONFIG_SYS_GPIO0_TSRL          0x00000000
#define CONFIG_SYS_GPIO0_TCR           0xF7FF8014

/*
 * Internal Definitions
 *
 * Boot Flags
 */
#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
#define BOOTFLAG_WARM	0x02		/* Software reboot			*/

/*
 * Default speed selection (cpu_plb_opb_ebc) in mhz.
 * This value will be set if iic boot eprom is disabled.
 */
#if 1
#define PLLMR0_DEFAULT	 PLLMR0_266_66_33_33
#define PLLMR1_DEFAULT	 PLLMR1_266_66_33_33
#endif
#if 0
#define PLLMR0_DEFAULT	 PLLMR0_266_133_66_33
#define PLLMR1_DEFAULT	 PLLMR1_266_133_66_33
#endif
#if 0
#define PLLMR0_DEFAULT	 PLLMR0_200_100_50_33
#define PLLMR1_DEFAULT	 PLLMR1_200_100_50_33
#endif
#if 0
#define PLLMR0_DEFAULT	 PLLMR0_133_66_66_33
#define PLLMR1_DEFAULT	 PLLMR1_133_66_66_33
#endif

#endif	/* __CONFIG_H */
Commit	Line	Data
a20b27a3 SR	1	/*
	2	* (C) Copyright 2004
	3	* Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
	4	*
	5	* See file CREDITS for list of people who contributed to this
	6	* project.
	7	*
	8	* This program is free software; you can redistribute it and/or
	9	* modify it under the terms of the GNU General Public License as
	10	* published by the Free Software Foundation; either version 2 of
	11	* the License, or (at your option) any later version.
	12	*
	13	* This program is distributed in the hope that it will be useful,
	14	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	15	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	16	* GNU General Public License for more details.
	17	*
	18	* You should have received a copy of the GNU General Public License
	19	* along with this program; if not, write to the Free Software
	20	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	21	* MA 02111-1307 USA
	22	*/
	23
	24	/*
	25	* board/config.h - configuration options, board specific
	26	*/
	27
	28	#ifndef __CONFIG_H
	29	#define __CONFIG_H
	30
	31	/*
	32	* High Level Configuration Options
	33	* (easy to change)
	34	*/
	35
	36	#define CONFIG_405EP 1 /* This is a PPC405 CPU */
	37	#define CONFIG_4xx 1 /* ...member of PPC4xx family */
	38	#define CONFIG_G2000 1 /* ...on a PLU405 board */
	39
	40	#define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */
	41	#define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */
	42
	43	#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */
	44
	45	#if 0 /* test-only */
	46	#define CONFIG_BAUDRATE 115200
	47	#else
	48	#define CONFIG_BAUDRATE 9600
	49	#endif
	50
	51	#define CONFIG_PREBOOT
	52
	53	#undef CONFIG_BOOTARGS
	54
	55	#define CONFIG_EXTRA_ENV_SETTINGS \
	56	"nfsargs=setenv bootargs root=/dev/nfs rw " \
fe126d8b	57	"nfsroot=${serverip}:${rootpath}\0" \
a20b27a3	58	"ramargs=setenv bootargs root=/dev/ram rw\0" \
fe126d8b WD	59	"addip=setenv bootargs ${bootargs} " \
	60	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
	61	":${hostname}:${netdev}:off\0" \
	62	"addmisc=setenv bootargs ${bootargs} " \
	63	"console=ttyS0,${baudrate} " \
a20b27a3 SR	64	"panic=1\0" \
a20b27a3 SR	65	"flash_nfs=run nfsargs addip addmisc;" \
fe126d8b	66	"bootm ${kernel_addr}\0" \
a20b27a3	67	"flash_self=run ramargs addip addmisc;" \
fe126d8b WD	68	"bootm ${kernel_addr} ${ramdisk_addr}\0" \
fe126d8b WD	69	"net_nfs=tftp 200000 ${bootfile};" \
a20b27a3 SR	70	"run nfsargs addip addmisc;bootm\0" \
	71	"rootpath=/opt/eldk/ppc_4xx\0" \
	72	"bootfile=/tftpboot/g2000/pImage\0" \
	73	"kernel_addr=ff800000\0" \
	74	"ramdisk_addr=ff900000\0" \
	75	"pciconfighost=yes\0" \
	76	""
	77	#define CONFIG_BOOTCOMMAND "run net_nfs"
	78
6d0f6bcf	79	#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
a20b27a3 SR	80
	81	#define CONFIG_NET_MULTI 1
	82
96e21f86	83	#define CONFIG_PPC4xx_EMAC
a20b27a3 SR	84	#define CONFIG_MII 1 /* MII PHY management */
	85	#define CONFIG_PHY_ADDR 0 /* PHY address */
	86	#define CONFIG_PHY1_ADDR 1 /* PHY address */
	87
	88	#if 0 /* test-only */
	89	#define CONFIG_PHY_CLK_FREQ EMAC_STACR_CLK_66MHZ /* 66 MHz OPB clock*/
	90	#endif
	91
60a0876b	92
11799434 JL	93	/*
	94	* BOOTP options
	95	*/
	96	#define CONFIG_BOOTP_BOOTFILESIZE
	97	#define CONFIG_BOOTP_BOOTPATH
	98	#define CONFIG_BOOTP_GATEWAY
	99	#define CONFIG_BOOTP_HOSTNAME
	100
	101
60a0876b JL	102	/*
	103	* Command line configuration.
	104	*/
	105	#include <config_cmd_default.h>
	106
	107	#define CONFIG_CMD_DHCP
	108	#define CONFIG_CMD_PCI
	109	#define CONFIG_CMD_IRQ
	110	#define CONFIG_CMD_ELF
	111	#define CONFIG_CMD_DATE
	112	#define CONFIG_CMD_I2C
	113	#define CONFIG_CMD_MII
	114	#define CONFIG_CMD_PING
	115	#define CONFIG_CMD_BSP
	116	#define CONFIG_CMD_EEPROM
	117
a20b27a3 SR	118
	119	#undef CONFIG_WATCHDOG /* watchdog disabled */
	120
	121	#if 0 /* test-only */
	122	#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */
	123	#endif
	124
	125	/*
	126	* Miscellaneous configurable options
	127	*/
6d0f6bcf JCPV	128	#define CONFIG_SYS_LONGHELP /* undef to save memory */
6d0f6bcf JCPV	129	#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
a20b27a3	130
6d0f6bcf JCPV	131	#undef CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
	132	#ifdef CONFIG_SYS_HUSH_PARSER
	133	#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
a20b27a3 SR	134	#endif
a20b27a3 SR	135
60a0876b	136	#if defined(CONFIG_CMD_KGDB)
6d0f6bcf	137	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
a20b27a3	138	#else
6d0f6bcf	139	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
a20b27a3	140	#endif
6d0f6bcf JCPV	141	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
	142	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	143	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
a20b27a3	144
6d0f6bcf	145	#define CONFIG_SYS_DEVICE_NULLDEV 1 /* include nulldev device */
a20b27a3	146
6d0f6bcf	147	#define CONFIG_SYS_CONSOLE_INFO_QUIET 1 /* don't print console @ startup*/
a20b27a3 SR	148
	149	#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */
	150
6d0f6bcf JCPV	151	#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
6d0f6bcf JCPV	152	#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
a20b27a3	153
6d0f6bcf	154	#undef CONFIG_SYS_EXT_SERIAL_CLOCK /* no external serial clock used */
6d0f6bcf	155	#define CONFIG_SYS_BASE_BAUD 691200
a20b27a3 SR	156	#undef CONFIG_UART1_CONSOLE /* define for uart1 as console */
	157
	158	/* The following table includes the supported baudrates */
6d0f6bcf	159	#define CONFIG_SYS_BAUDRATE_TABLE \
a20b27a3 SR	160	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, \
	161	57600, 115200, 230400, 460800, 921600 }
	162
6d0f6bcf JCPV	163	#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
6d0f6bcf JCPV	164	#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */
a20b27a3	165
6d0f6bcf	166	#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
a20b27a3 SR	167
	168	#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
	169	#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */
	170
	171	#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
	172
6d0f6bcf	173	#define CONFIG_SYS_RX_ETH_BUFFER 16 /* use 16 rx buffer on 405 emac */
a20b27a3 SR	174
	175	/----------------------------------------------------------------------------/
	176	/* adding Ethernet setting: FTS OUI 00:11:0B */
	177	/----------------------------------------------------------------------------/
	178	#define CONFIG_ETHADDR 00:11:0B:00:00:01
e2ffd59b	179	#define CONFIG_HAS_ETH1
a20b27a3 SR	180	#define CONFIG_ETH1ADDR 00:11:0B:00:00:02
	181	#define CONFIG_IPADDR 10.48.8.178
	182	#define CONFIG_IP1ADDR 10.48.8.188
	183	#define CONFIG_NETMASK 255.255.255.128
	184	#define CONFIG_SERVERIP 10.48.8.138
	185
	186	/*-----------------------------------------------------------------------
	187	* RTC stuff
	188	*-----------------------------------------------------------------------
	189	*/
	190	#define CONFIG_RTC_DS1337
6d0f6bcf	191	#define CONFIG_SYS_I2C_RTC_ADDR 0x68
a20b27a3 SR	192
	193	#if 0 /* test-only */
	194	/*-----------------------------------------------------------------------
	195	* NAND-FLASH stuff
	196	*-----------------------------------------------------------------------
	197	*/
6d0f6bcf	198	#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
a20b27a3	199
6d0f6bcf JCPV	200	#define CONFIG_SYS_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */
	201	#define CONFIG_SYS_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */
	202	#define CONFIG_SYS_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */
	203	#define CONFIG_SYS_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */
a20b27a3	204
a20b27a3 SR	205	#endif
	206
	207	/*-----------------------------------------------------------------------
	208	* PCI stuff
	209	*-----------------------------------------------------------------------
	210	*/
	211	#define PCI_HOST_ADAPTER 0 /* configure as pci adapter */
	212	#define PCI_HOST_FORCE 1 /* configure as pci host */
	213	#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
	214
	215	#define CONFIG_PCI /* include pci support */
	216	#define CONFIG_PCI_HOST PCI_HOST_HOST /* select pci host function */
	217	#define CONFIG_PCI_PNP /* do pci plug-and-play */
	218	/* resource configuration */
	219
	220	#define CONFIG_PCI_SCAN_SHOW /* print pci devices @ startup */
	221
	222	#define CONFIG_PCI_CONFIG_HOST_BRIDGE 1 /* don't skip host bridge config*/
	223
6d0f6bcf JCPV	224	#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x12FE /* PCI Vendor ID: esd gmbh */
	225	#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0405 /* PCI Device ID: CPCI-405 */
	226	#define CONFIG_SYS_PCI_CLASSCODE 0x0b20 /* PCI Class Code: Processor/PPC*/
	227	#define CONFIG_SYS_PCI_PTM1LA 0x00000000 /* point to sdram */
	228	#define CONFIG_SYS_PCI_PTM1MS 0xfc000001 /* 64MB, enable hard-wired to 1 */
	229	#define CONFIG_SYS_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
	230	#define CONFIG_SYS_PCI_PTM2LA 0xffc00000 /* point to flash */
	231	#define CONFIG_SYS_PCI_PTM2MS 0xffc00001 /* 4MB, enable */
	232	#define CONFIG_SYS_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */
a20b27a3 SR	233
	234	/*
	235	* For booting Linux, the board info and command line data
	236	* have to be in the first 8 MB of memory, since this is
	237	* the maximum mapped by the Linux kernel during initialization.
	238	*/
6d0f6bcf	239	#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
a20b27a3 SR	240
	241	/*-----------------------------------------------------------------------
	242	* FLASH organization
	243	*/
	244	#if 0 /* APC405 */
6d0f6bcf JCPV	245	#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */
	246	#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
	247	#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
	248	#undef CONFIG_SYS_FLASH_PROTECTION /* don't use hardware protection */
	249	#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
	250	#define CONFIG_SYS_FLASH_BASE 0xFE000000 /* test-only...*/
	251	#define CONFIG_SYS_FLASH_INCREMENT 0x01000000 /* test-only */
a20b27a3	252	#else /* G2000 */
6d0f6bcf JCPV	253	#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */
	254	#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
	255	#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
	256	#undef CONFIG_SYS_FLASH_PROTECTION /* don't use hardware protection */
	257	#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
	258	#define CONFIG_SYS_FLASH_BASE 0xFF800000 /* test-only...*/
	259	#define CONFIG_SYS_FLASH_INCREMENT 0x01000000 /* test-only */
a20b27a3 SR	260	#endif
a20b27a3 SR	261
6d0f6bcf	262	#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
a20b27a3	263
6d0f6bcf JCPV	264	#define CONFIG_SYS_JFFS2_FIRST_BANK 0 /* use for JFFS2 */
6d0f6bcf JCPV	265	#define CONFIG_SYS_JFFS2_NUM_BANKS 1 /* ! second bank contains u-boot */
a20b27a3 SR	266
	267	/*-----------------------------------------------------------------------
	268	* Start addresses for the final memory configuration
	269	* (Set up by the startup code)
6d0f6bcf	270	* Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
a20b27a3	271	*/
6d0f6bcf JCPV	272	#define CONFIG_SYS_SDRAM_BASE 0x00000000
	273	#define CONFIG_SYS_MONITOR_BASE 0xFFFC0000
	274	#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */
	275	#define CONFIG_SYS_MALLOC_LEN (256 * 1024) /* Reserve 256 kB for malloc() */
a20b27a3 SR	276
	277	/*-----------------------------------------------------------------------
	278	* Environment Variable setup
	279	*/
	280	#if 1 /* test-only */
bb1f8b4f	281	#define CONFIG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */
0e8d1586 JCPV	282	#define CONFIG_ENV_OFFSET 0x100 /* environment starts at the beginning of the EEPROM */
0e8d1586 JCPV	283	#define CONFIG_ENV_SIZE 0x700 /* 2048 bytes may be used for env vars*/
a20b27a3 SR	284	/* total size of a CAT24WC16 is 2048 bytes */
	285
	286	#else /* DEFAULT: environment in flash, using redundand flash sectors */
	287
5a1aceb0	288	#define CONFIG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
0e8d1586 JCPV	289	#define CONFIG_ENV_ADDR 0xFFFA0000 /* environment starts before u-boot */
0e8d1586 JCPV	290	#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128k bytes may be used for env vars*/
a20b27a3 SR	291
	292	#endif
	293
	294	/*-----------------------------------------------------------------------
	295	* I2C EEPROM (CAT24WC16) for environment
	296	*/
	297	#define CONFIG_HARD_I2C /* I2c with hardware support */
d0b0dcaa	298	#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
6d0f6bcf JCPV	299	#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
6d0f6bcf JCPV	300	#define CONFIG_SYS_I2C_SLAVE 0x7F
a20b27a3	301
6d0f6bcf	302	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT24WC08 */
a20b27a3	303	/* CAT24WC08/16... */
6d0f6bcf	304	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
a20b27a3	305	/* mask of address bits that overflow into the "EEPROM chip address" */
6d0f6bcf JCPV	306	#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x07
6d0f6bcf JCPV	307	#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* The Catalyst CAT24WC08 has */
a20b27a3 SR	308	/* 16 byte page write mode using*/
a20b27a3 SR	309	/* last 4 bits of the address */
6d0f6bcf	310	#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
a20b27a3	311
a20b27a3 SR	312	/*-----------------------------------------------------------------------
	313	* External Bus Controller (EBC) Setup
	314	*/
	315
	316	/* Memory Bank 0 (Intel Strata Flash) initialization */
6d0f6bcf JCPV	317	#define CONFIG_SYS_EBC_PB0AP 0x92015480
6d0f6bcf JCPV	318	#define CONFIG_SYS_EBC_PB0CR 0xFF87A000 /* BAS=0xFF8,BS=08MB,BU=R/W,BW=16bit*/
a20b27a3 SR	319
a20b27a3 SR	320	/* Memory Bank 1 ( Power TAU) initialization */
6d0f6bcf JCPV	321	/* #define CONFIG_SYS_EBC_PB1AP 0x04041000 */
	322	/* #define CONFIG_SYS_EBC_PB1CR 0xF0018000 / / BAS=0xF00,BS=1MB,BU=R/W,BW=8bit */
	323	#define CONFIG_SYS_EBC_PB1AP 0x00000000
	324	#define CONFIG_SYS_EBC_PB1CR 0x00000000
a20b27a3 SR	325
a20b27a3 SR	326	/* Memory Bank 2 (Intel Flash) initialization */
6d0f6bcf JCPV	327	#define CONFIG_SYS_EBC_PB2AP 0x00000000
6d0f6bcf JCPV	328	#define CONFIG_SYS_EBC_PB2CR 0x00000000
a20b27a3 SR	329
a20b27a3 SR	330	/* Memory Bank 3 (NAND) initialization */
6d0f6bcf JCPV	331	#define CONFIG_SYS_EBC_PB3AP 0x92015480
6d0f6bcf JCPV	332	#define CONFIG_SYS_EBC_PB3CR 0xF40B8000 /addr 0xF40, BS=32M,BU=R/W, BW=8bit /
a20b27a3 SR	333
a20b27a3 SR	334	/* Memory Bank 4 (FPGA regs) initialization */
6d0f6bcf JCPV	335	#define CONFIG_SYS_EBC_PB4AP 0x00000000
6d0f6bcf JCPV	336	#define CONFIG_SYS_EBC_PB4CR 0x00000000 /* leave it blank */
a20b27a3	337
6d0f6bcf	338	#define CONFIG_SYS_NAND_BASE 0xF4000000
a20b27a3 SR	339
	340	/*-----------------------------------------------------------------------
	341	* Definitions for initial stack pointer and data area (in data cache)
	342	*/
	343	/* use on chip memory ( OCM ) for temperary stack until sdram is tested */
6d0f6bcf	344	#define CONFIG_SYS_TEMP_STACK_OCM 1
a20b27a3 SR	345
a20b27a3 SR	346	/* On Chip Memory location */
6d0f6bcf JCPV	347	#define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000
	348	#define CONFIG_SYS_OCM_DATA_SIZE 0x1000
	349	#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */
	350	#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM */
a20b27a3	351
6d0f6bcf JCPV	352	#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
	353	#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
	354	#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
a20b27a3 SR	355
	356	/*-----------------------------------------------------------------------
	357	* Definitions for GPIO setup (PPC405EP specific)
	358	*
	359	* GPIO0[0] - External Bus Controller BLAST output
	360	* GPIO0[1-9] - Instruction trace outputs
	361	* GPIO0[10-13] - External Bus Controller CS_1 - CS_4 outputs
	362	* GPIO0[14-16] - External Bus Controller ABUS3-ABUS5 outputs
	363	* GPIO0[17-23] - External Interrupts IRQ0 - IRQ6 inputs
	364	* GPIO0[24-27] - UART0 control signal inputs/outputs
	365	* GPIO0[28-29] - UART1 data signal input/output
	366	* GPIO0[30-31] - EMAC0 and EMAC1 reject packet inputs
	367	*
	368	* following GPIO setting changed for G20000, 080304
	369	*/
6d0f6bcf JCPV	370	#define CONFIG_SYS_GPIO0_OSRH 0x40005555
	371	#define CONFIG_SYS_GPIO0_OSRL 0x40000110
	372	#define CONFIG_SYS_GPIO0_ISR1H 0x00000000
	373	#define CONFIG_SYS_GPIO0_ISR1L 0x15555445
	374	#define CONFIG_SYS_GPIO0_TSRH 0x00000000
	375	#define CONFIG_SYS_GPIO0_TSRL 0x00000000
	376	#define CONFIG_SYS_GPIO0_TCR 0xF7FF8014
a20b27a3 SR	377
	378	/*
	379	* Internal Definitions
	380	*
	381	* Boot Flags
	382	*/
	383	#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
	384	#define BOOTFLAG_WARM 0x02 /* Software reboot */
	385
	386	/*
	387	* Default speed selection (cpu_plb_opb_ebc) in mhz.
	388	* This value will be set if iic boot eprom is disabled.
	389	*/
	390	#if 1
	391	#define PLLMR0_DEFAULT PLLMR0_266_66_33_33
	392	#define PLLMR1_DEFAULT PLLMR1_266_66_33_33
	393	#endif
	394	#if 0
	395	#define PLLMR0_DEFAULT PLLMR0_266_133_66_33
	396	#define PLLMR1_DEFAULT PLLMR1_266_133_66_33
	397	#endif
	398	#if 0
	399	#define PLLMR0_DEFAULT PLLMR0_200_100_50_33
	400	#define PLLMR1_DEFAULT PLLMR1_200_100_50_33
	401	#endif
	402	#if 0
	403	#define PLLMR0_DEFAULT PLLMR0_133_66_66_33
	404	#define PLLMR1_DEFAULT PLLMR1_133_66_66_33
	405	#endif
	406
	407	#endif /* __CONFIG_H */