[people/ms/u-boot.git] / include / configs / JSE.h

/*
 * (C) Copyright 2003 Picture Elements, Inc.
 * Stephen Williams <steve@icarus.com>
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

/*
 * board/config.h - configuration options, board specific
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/*
 * High Level Configuration Options for the JSE board
 * (Theoretically easy to change, but the board is fixed.)
 */

#define CONFIG_JSE 1
  /* JSE has a PPC405GPr */
#define CONFIG_405GP 1
  /* ... which is a 4xxx series */
#define CONFIG_4x   1
  /* ... with a 33MHz OSC. connected to the SysCLK input */
#define CONFIG_SYS_CLK_FREQ	33333333
  /* ... with on-chip memory here (4KBytes) */
#define CONFIG_SYS_OCM_DATA_ADDR 0xF4000000
#define CONFIG_SYS_OCM_DATA_SIZE 0x00001000
  /* Do not set up locked dcache as init ram. */
#undef CONFIG_SYS_INIT_DCACHE_CS

#define	CONFIG_SYS_TEXT_BASE	0xFFF80000

  /* Map the SystemACE chip (CS#1) here. (Must be a multiple of 1Meg) */
#define CONFIG_SYSTEMACE 1
#define CONFIG_SYS_SYSTEMACE_BASE 0xf0000000
#define CONFIG_SYS_SYSTEMACE_WIDTH 8
#define CONFIG_DOS_PARTITION 1

  /* Use the On-Chip-Memory (OCM) as a temporary stack for the startup code. */
#define CONFIG_SYS_TEMP_STACK_OCM 1
  /* ... place INIT RAM in the OCM address */
# define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_DATA_ADDR
  /* ... give it the whole init ram */
# define CONFIG_SYS_INIT_RAM_SIZE	CONFIG_SYS_OCM_DATA_SIZE
  /* ... Shave a bit off the end for global data */
# define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  /* ... and place the stack pointer at the top of what's left. */
# define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET

  /* Enable board_pre_init function */
#define CONFIG_BOARD_PRE_INIT	1
#define CONFIG_BOARD_EARLY_INIT_F 1
  /* Disable post-clk setup init function */
#undef CONFIG_BOARD_POSTCLK_INIT
  /* Disable call to post_init_f: late init function. */
#undef CONFIG_POST
  /* Enable DRAM test. */
#define CONFIG_SYS_DRAM_TEST 1
  /* Enable misc_init_r function. */
#define CONFIG_MISC_INIT_R 1

  /* JSE has EEPROM chips that are good for environment. */
#undef	CONFIG_ENV_IS_IN_NVRAM
#undef	CONFIG_ENV_IS_IN_FLASH
#define CONFIG_ENV_IS_IN_EEPROM 1
#undef	CONFIG_ENV_IS_NOWHERE

  /* This is the 7bit address of the device, not including P. */
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
  /* After the device address, need one more address byte. */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
  /* The EEPROM is 512 bytes. */
#define CONFIG_SYS_EEPROM_SIZE 512
  /* The EEPROM can do 16byte ( 1 << 4 ) page writes. */
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
  /* Put the environment in the second half. */
#define CONFIG_ENV_OFFSET	0x00
#define CONFIG_ENV_SIZE	512

  /* The JSE connects UART1 to the console tap connector. */
#define CONFIG_CONS_INDEX	2
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE	1
#define CONFIG_SYS_NS16550_CLK		get_serial_clock()

  /* Set console baudrate to 9600 */
#define CONFIG_BAUDRATE		9600

/*
 * Configuration related to auto-boot.
 *
 * CONFIG_BOOTDELAY sets the delay (in seconds) that U-Boot will wait
 * before resorting to autoboot. This value can be overridden by the
 * bootdelay environment variable.
 *
 * CONFIG_AUTOBOOT_PROMPT is the string that U-Boot emits to warn the
 * user that an autoboot will happen.
 *
 * CONFIG_BOOTCOMMAND is the sequence of commands that U-Boot will
 * execute to boot the JSE. This loads the uimage and initrd.img files
 * from CompactFlash into memory, then boots them from memory.
 *
 * CONFIG_BOOTARGS is the arguments passed to the Linux kernel to get
 * it going on the JSE.
 */
#define CONFIG_BOOTDELAY	5
#define CONFIG_BOOTARGS		"root=/dev/ram0 init=/linuxrc rw"
#define CONFIG_BOOTCOMMAND	"fatload ace 0 2000000 uimage; fatload ace 0 2100000 initrd.img; bootm 2000000 2100000"


#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/

#define CONFIG_PPC4xx_EMAC
#define CONFIG_MII		1	/* MII PHY management		*/
#define CONFIG_PHY_ADDR		1	/* PHY address			*/


/*
 * BOOTP options
 */
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME


/*
 * Command line configuration.
 */
#include <config_cmd_default.h>

#define CONFIG_CMD_DHCP
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_ELF
#define CONFIG_CMD_FAT
#define CONFIG_CMD_FLASH
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_MII
#define CONFIG_CMD_NET
#define CONFIG_CMD_PCI
#define CONFIG_CMD_PING


  /* watchdog disabled */
#undef CONFIG_WATCHDOG
  /* SPD EEPROM (sdram speed config) disabled */
#undef CONFIG_SPD_EEPROM
#undef SPD_EEPROM_ADDRESS

/*
 * Miscellaneous configurable options
 */
#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/

#define CONFIG_SYS_HUSH_PARSER			/* use "hush" command parser	*/

#if defined(CONFIG_CMD_KGDB)
#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
#else
#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
#endif
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/

#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/

/*
 * If CONFIG_SYS_EXT_SERIAL_CLOCK, then the UART divisor is 1.
 * If CONFIG_SYS_405_UART_ERRATA_59, then UART divisor is 31.
 * Otherwise, UART divisor is determined by CPU Clock and CONFIG_SYS_BASE_BAUD value.
 * The Linux BASE_BAUD define should match this configuration.
 *    baseBaud = cpuClock/(uartDivisor*16)
 * If CONFIG_SYS_405_UART_ERRATA_59 and 200MHz CPU clock,
 * set Linux BASE_BAUD to 403200.
 */
#undef	CONFIG_SYS_EXT_SERIAL_CLOCK	       /* external serial clock */
#undef	CONFIG_SYS_405_UART_ERRATA_59	       /* 405GP/CR Rev. D silicon */
#define CONFIG_SYS_BASE_BAUD	    691200

/* The following table includes the supported baudrates */
#define CONFIG_SYS_BAUDRATE_TABLE  \
    {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}

#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
#define CONFIG_SYS_EXTBDINFO		1	/* To use extended board_into (bd_t) */

#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */

#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_PPC4XX
#define CONFIG_SYS_I2C_PPC4XX_CH0
#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		400000
#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0		0x7F


/*-----------------------------------------------------------------------
 * PCI stuff
 *-----------------------------------------------------------------------
 */
#define PCI_HOST_ADAPTER 0		/* configure ar pci adapter	*/
#define PCI_HOST_FORCE	1		/* configure as pci host	*/
#define PCI_HOST_AUTO	2		/* detected via arbiter enable	*/

#define CONFIG_PCI			/* include pci support		*/
#define CONFIG_PCI_INDIRECT_BRIDGE	/* indirect PCI bridge support */
#define CONFIG_PCI_HOST PCI_HOST_FORCE	/* select pci host function	*/
#undef	CONFIG_PCI_PNP			/* do pci plug-and-play		*/
					/* resource configuration	*/

#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x0000	/* PCI Vendor ID: to-do!!!	*/
#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0000	/* PCI Device ID: to-do!!!	*/
#define CONFIG_SYS_PCI_PTM1LA	0x00000000	/* point to sdram		*/
#define CONFIG_SYS_PCI_PTM1MS	0x80000001	/* 2GB, enable hard-wired to 1	*/
#define CONFIG_SYS_PCI_PTM1PCI 0x00000000	/* Host: use this pci address	*/
#define CONFIG_SYS_PCI_PTM2LA	0x00000000	/* disabled			*/
#define CONFIG_SYS_PCI_PTM2MS	0x00000000	/* disabled			*/
#define CONFIG_SYS_PCI_PTM2PCI 0x04000000	/* Host: use this pci address	*/

/*-----------------------------------------------------------------------
 * External peripheral base address
 *-----------------------------------------------------------------------
 */
#undef	CONFIG_IDE_LED			/* no led for ide supported	*/
#undef	CONFIG_IDE_RESET		/* no reset for ide supported	*/

#define CONFIG_SYS_KEY_REG_BASE_ADDR	0xF0100000
#define CONFIG_SYS_IR_REG_BASE_ADDR	0xF0200000
#define CONFIG_SYS_FPGA_REG_BASE_ADDR	0xF0300000

/*-----------------------------------------------------------------------
 * Start addresses for the final memory configuration
 * (Set up by the startup code)
 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 */
#define CONFIG_SYS_SDRAM_BASE		0x00000000
#define CONFIG_SYS_FLASH_BASE		0xFFF80000
#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Monitor	*/
#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 8 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization.
 */
#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */

/*-----------------------------------------------------------------------
 * FLASH organization
 */
#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/

#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/

/*
 * Init Memory Controller:
 *
 * BR0/1 and OR0/1 (FLASH)
 */

#define FLASH_BASE0_PRELIM	CONFIG_SYS_FLASH_BASE	/* FLASH bank #0	*/
#define FLASH_BASE1_PRELIM	0		/* FLASH bank #1	*/


/* Configuration Port location */
#define CONFIG_PORT_ADDR	0xF0000500

#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
#endif
#endif	/* __CONFIG_H */
Commit	Line	Data
db01a2ea WD	1	/*
	2	* (C) Copyright 2003 Picture Elements, Inc.
	3	* Stephen Williams <steve@icarus.com>
	4	*
	5	* See file CREDITS for list of people who contributed to this
	6	* project.
	7	*
	8	* This program is free software; you can redistribute it and/or
	9	* modify it under the terms of the GNU General Public License as
	10	* published by the Free Software Foundation; either version 2 of
	11	* the License, or (at your option) any later version.
	12	*
	13	* This program is distributed in the hope that it will be useful,
	14	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	15	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	16	* GNU General Public License for more details.
	17	*
	18	* You should have received a copy of the GNU General Public License
	19	* along with this program; if not, write to the Free Software
	20	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	21	* MA 02111-1307 USA
	22	*/
	23
	24	/*
	25	* board/config.h - configuration options, board specific
	26	*/
	27
	28	#ifndef __CONFIG_H
	29	#define __CONFIG_H
	30
	31	/*
	32	* High Level Configuration Options for the JSE board
	33	* (Theoretically easy to change, but the board is fixed.)
	34	*/
	35
	36	#define CONFIG_JSE 1
	37	/* JSE has a PPC405GPr */
	38	#define CONFIG_405GP 1
	39	/* ... which is a 4xxx series */
2ae18241	40	#define CONFIG_4x 1
db01a2ea WD	41	/* ... with a 33MHz OSC. connected to the SysCLK input */
	42	#define CONFIG_SYS_CLK_FREQ 33333333
	43	/* ... with on-chip memory here (4KBytes) */
6d0f6bcf JCPV	44	#define CONFIG_SYS_OCM_DATA_ADDR 0xF4000000
6d0f6bcf JCPV	45	#define CONFIG_SYS_OCM_DATA_SIZE 0x00001000
db01a2ea	46	/* Do not set up locked dcache as init ram. */
6d0f6bcf	47	#undef CONFIG_SYS_INIT_DCACHE_CS
db01a2ea	48
2ae18241 WD	49	#define CONFIG_SYS_TEXT_BASE 0xFFF80000
2ae18241 WD	50
db01a2ea WD	51	/* Map the SystemACE chip (CS#1) here. (Must be a multiple of 1Meg) */
db01a2ea WD	52	#define CONFIG_SYSTEMACE 1
6d0f6bcf JCPV	53	#define CONFIG_SYS_SYSTEMACE_BASE 0xf0000000
6d0f6bcf JCPV	54	#define CONFIG_SYS_SYSTEMACE_WIDTH 8
db01a2ea WD	55	#define CONFIG_DOS_PARTITION 1
	56
	57	/* Use the On-Chip-Memory (OCM) as a temporary stack for the startup code. */
6d0f6bcf	58	#define CONFIG_SYS_TEMP_STACK_OCM 1
db01a2ea	59	/* ... place INIT RAM in the OCM address */
6d0f6bcf	60	# define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR
db01a2ea	61	/* ... give it the whole init ram */
553f0982	62	# define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE
db01a2ea	63	/* ... Shave a bit off the end for global data */
25ddd1fb	64	# define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
db01a2ea	65	/* ... and place the stack pointer at the top of what's left. */
6d0f6bcf	66	# define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
db01a2ea WD	67
	68	/* Enable board_pre_init function */
	69	#define CONFIG_BOARD_PRE_INIT 1
	70	#define CONFIG_BOARD_EARLY_INIT_F 1
	71	/* Disable post-clk setup init function */
	72	#undef CONFIG_BOARD_POSTCLK_INIT
	73	/* Disable call to post_init_f: late init function. */
	74	#undef CONFIG_POST
	75	/* Enable DRAM test. */
6d0f6bcf	76	#define CONFIG_SYS_DRAM_TEST 1
db01a2ea WD	77	/* Enable misc_init_r function. */
	78	#define CONFIG_MISC_INIT_R 1
	79
	80	/* JSE has EEPROM chips that are good for environment. */
9314cee6	81	#undef CONFIG_ENV_IS_IN_NVRAM
5a1aceb0	82	#undef CONFIG_ENV_IS_IN_FLASH
bb1f8b4f	83	#define CONFIG_ENV_IS_IN_EEPROM 1
93f6d725	84	#undef CONFIG_ENV_IS_NOWHERE
db01a2ea WD	85
db01a2ea WD	86	/* This is the 7bit address of the device, not including P. */
6d0f6bcf	87	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
db01a2ea	88	/* After the device address, need one more address byte. */
6d0f6bcf	89	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
db01a2ea	90	/* The EEPROM is 512 bytes. */
6d0f6bcf	91	#define CONFIG_SYS_EEPROM_SIZE 512
db01a2ea	92	/* The EEPROM can do 16byte ( 1 << 4 ) page writes. */
6d0f6bcf JCPV	93	#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4
6d0f6bcf JCPV	94	#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
db01a2ea	95	/* Put the environment in the second half. */
0e8d1586 JCPV	96	#define CONFIG_ENV_OFFSET 0x00
0e8d1586 JCPV	97	#define CONFIG_ENV_SIZE 512
db01a2ea	98
db01a2ea	99	/* The JSE connects UART1 to the console tap connector. */
550650dd SR	100	#define CONFIG_CONS_INDEX 2
	101	#define CONFIG_SYS_NS16550
	102	#define CONFIG_SYS_NS16550_SERIAL
	103	#define CONFIG_SYS_NS16550_REG_SIZE 1
	104	#define CONFIG_SYS_NS16550_CLK get_serial_clock()
	105
db01a2ea WD	106	/* Set console baudrate to 9600 */
	107	#define CONFIG_BAUDRATE 9600
	108
db01a2ea WD	109	/*
	110	* Configuration related to auto-boot.
	111	*
	112	* CONFIG_BOOTDELAY sets the delay (in seconds) that U-Boot will wait
	113	* before resorting to autoboot. This value can be overridden by the
	114	* bootdelay environment variable.
	115	*
	116	* CONFIG_AUTOBOOT_PROMPT is the string that U-Boot emits to warn the
	117	* user that an autoboot will happen.
	118	*
	119	* CONFIG_BOOTCOMMAND is the sequence of commands that U-Boot will
	120	* execute to boot the JSE. This loads the uimage and initrd.img files
	121	* from CompactFlash into memory, then boots them from memory.
	122	*
	123	* CONFIG_BOOTARGS is the arguments passed to the Linux kernel to get
	124	* it going on the JSE.
	125	*/
	126	#define CONFIG_BOOTDELAY 5
	127	#define CONFIG_BOOTARGS "root=/dev/ram0 init=/linuxrc rw"
	128	#define CONFIG_BOOTCOMMAND "fatload ace 0 2000000 uimage; fatload ace 0 2100000 initrd.img; bootm 2000000 2100000"
	129
	130
	131	#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
6d0f6bcf	132	#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
db01a2ea	133
96e21f86	134	#define CONFIG_PPC4xx_EMAC
db01a2ea WD	135	#define CONFIG_MII 1 /* MII PHY management */
	136	#define CONFIG_PHY_ADDR 1 /* PHY address */
	137
348f258f	138
659e2f67 JL	139	/*
	140	* BOOTP options
	141	*/
	142	#define CONFIG_BOOTP_BOOTFILESIZE
	143	#define CONFIG_BOOTP_BOOTPATH
	144	#define CONFIG_BOOTP_GATEWAY
	145	#define CONFIG_BOOTP_HOSTNAME
	146
	147
348f258f JL	148	/*
	149	* Command line configuration.
	150	*/
	151	#include <config_cmd_default.h>
	152
	153	#define CONFIG_CMD_DHCP
	154	#define CONFIG_CMD_EEPROM
	155	#define CONFIG_CMD_ELF
	156	#define CONFIG_CMD_FAT
	157	#define CONFIG_CMD_FLASH
	158	#define CONFIG_CMD_IRQ
	159	#define CONFIG_CMD_MII
	160	#define CONFIG_CMD_NET
	161	#define CONFIG_CMD_PCI
	162	#define CONFIG_CMD_PING
	163
db01a2ea WD	164
	165	/* watchdog disabled */
	166	#undef CONFIG_WATCHDOG
	167	/* SPD EEPROM (sdram speed config) disabled */
2471111d	168	#undef CONFIG_SPD_EEPROM
db01a2ea WD	169	#undef SPD_EEPROM_ADDRESS
	170
	171	/*
	172	* Miscellaneous configurable options
	173	*/
6d0f6bcf JCPV	174	#define CONFIG_SYS_LONGHELP /* undef to save memory */
6d0f6bcf JCPV	175	#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
db01a2ea	176
6d0f6bcf	177	#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
db01a2ea	178
348f258f	179	#if defined(CONFIG_CMD_KGDB)
6d0f6bcf	180	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
db01a2ea	181	#else
6d0f6bcf	182	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
db01a2ea	183	#endif
6d0f6bcf JCPV	184	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
	185	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	186	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
db01a2ea	187
6d0f6bcf JCPV	188	#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
6d0f6bcf JCPV	189	#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
db01a2ea WD	190
db01a2ea WD	191	/*
6d0f6bcf JCPV	192	* If CONFIG_SYS_EXT_SERIAL_CLOCK, then the UART divisor is 1.
	193	* If CONFIG_SYS_405_UART_ERRATA_59, then UART divisor is 31.
	194	* Otherwise, UART divisor is determined by CPU Clock and CONFIG_SYS_BASE_BAUD value.
db01a2ea WD	195	* The Linux BASE_BAUD define should match this configuration.
db01a2ea WD	196	* baseBaud = cpuClock/(uartDivisor*16)
6d0f6bcf	197	* If CONFIG_SYS_405_UART_ERRATA_59 and 200MHz CPU clock,
db01a2ea WD	198	* set Linux BASE_BAUD to 403200.
db01a2ea WD	199	*/
6d0f6bcf JCPV	200	#undef CONFIG_SYS_EXT_SERIAL_CLOCK /* external serial clock */
	201	#undef CONFIG_SYS_405_UART_ERRATA_59 /* 405GP/CR Rev. D silicon */
	202	#define CONFIG_SYS_BASE_BAUD 691200
db01a2ea WD	203
db01a2ea WD	204	/* The following table includes the supported baudrates */
6d0f6bcf	205	#define CONFIG_SYS_BAUDRATE_TABLE \
db01a2ea WD	206	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
db01a2ea WD	207
6d0f6bcf JCPV	208	#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
6d0f6bcf JCPV	209	#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */
db01a2ea	210
6d0f6bcf	211	#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
db01a2ea	212
880540de DE	213	#define CONFIG_SYS_I2C
	214	#define CONFIG_SYS_I2C_PPC4XX
	215	#define CONFIG_SYS_I2C_PPC4XX_CH0
	216	#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000
	217	#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F
db01a2ea WD	218
	219
	220	/*-----------------------------------------------------------------------
	221	* PCI stuff
	222	*-----------------------------------------------------------------------
	223	*/
	224	#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */
	225	#define PCI_HOST_FORCE 1 /* configure as pci host */
	226	#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
	227
	228	#define CONFIG_PCI /* include pci support */
842033e6	229	#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
db01a2ea WD	230	#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */
	231	#undef CONFIG_PCI_PNP /* do pci plug-and-play */
	232	/* resource configuration */
	233
6d0f6bcf JCPV	234	#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x0000 /* PCI Vendor ID: to-do!!! */
	235	#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0000 /* PCI Device ID: to-do!!! */
	236	#define CONFIG_SYS_PCI_PTM1LA 0x00000000 /* point to sdram */
	237	#define CONFIG_SYS_PCI_PTM1MS 0x80000001 /* 2GB, enable hard-wired to 1 */
	238	#define CONFIG_SYS_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
	239	#define CONFIG_SYS_PCI_PTM2LA 0x00000000 /* disabled */
	240	#define CONFIG_SYS_PCI_PTM2MS 0x00000000 /* disabled */
	241	#define CONFIG_SYS_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */
db01a2ea WD	242
	243	/*-----------------------------------------------------------------------
	244	* External peripheral base address
	245	*-----------------------------------------------------------------------
	246	*/
	247	#undef CONFIG_IDE_LED /* no led for ide supported */
	248	#undef CONFIG_IDE_RESET /* no reset for ide supported */
	249
6d0f6bcf JCPV	250	#define CONFIG_SYS_KEY_REG_BASE_ADDR 0xF0100000
	251	#define CONFIG_SYS_IR_REG_BASE_ADDR 0xF0200000
	252	#define CONFIG_SYS_FPGA_REG_BASE_ADDR 0xF0300000
db01a2ea WD	253
	254	/*-----------------------------------------------------------------------
	255	* Start addresses for the final memory configuration
	256	* (Set up by the startup code)
6d0f6bcf	257	* Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
db01a2ea	258	*/
6d0f6bcf JCPV	259	#define CONFIG_SYS_SDRAM_BASE 0x00000000
	260	#define CONFIG_SYS_FLASH_BASE 0xFFF80000
	261	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
	262	#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */
	263	#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
db01a2ea WD	264
	265	/*
	266	* For booting Linux, the board info and command line data
	267	* have to be in the first 8 MB of memory, since this is
	268	* the maximum mapped by the Linux kernel during initialization.
	269	*/
6d0f6bcf	270	#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
db01a2ea WD	271
	272	/*-----------------------------------------------------------------------
	273	* FLASH organization
	274	*/
6d0f6bcf JCPV	275	#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
6d0f6bcf JCPV	276	#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
db01a2ea	277
6d0f6bcf JCPV	278	#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
6d0f6bcf JCPV	279	#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
db01a2ea	280
db01a2ea WD	281	/*
	282	* Init Memory Controller:
	283	*
	284	* BR0/1 and OR0/1 (FLASH)
	285	*/
	286
6d0f6bcf	287	#define FLASH_BASE0_PRELIM CONFIG_SYS_FLASH_BASE /* FLASH bank #0 */
db01a2ea WD	288	#define FLASH_BASE1_PRELIM 0 /* FLASH bank #1 */
	289
	290
	291	/* Configuration Port location */
	292	#define CONFIG_PORT_ADDR 0xF0000500
	293
348f258f	294	#if defined(CONFIG_CMD_KGDB)
db01a2ea WD	295	#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
	296	#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
	297	#endif
	298	#endif /* __CONFIG_H */