[people/ms/u-boot.git] / include / configs / M53017EVB.h

/*
 * Configuation settings for the Freescale MCF53017EVB.
 *
 * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
 * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
 *
 * SPDX-License-Identifier:	GPL-2.0+ 
 */

/*
 * board/config.h - configuration options, board specific
 */

#ifndef _M53017EVB_H
#define _M53017EVB_H

/*
 * High Level Configuration Options
 * (easy to change)
 */
#define CONFIG_MCF5301x		/* define processor family */
#define CONFIG_M53015		/* define processor type */

#define CONFIG_MCFUART
#define CONFIG_SYS_UART_PORT		(0)
#define CONFIG_BAUDRATE			115200

#undef CONFIG_WATCHDOG
#define CONFIG_WATCHDOG_TIMEOUT		5000

/* Command line configuration */
#include <config_cmd_default.h>

#define CONFIG_CMD_CACHE
#define CONFIG_CMD_DATE
#define CONFIG_CMD_ELF
#define CONFIG_CMD_FLASH
#undef CONFIG_CMD_I2C
#define CONFIG_CMD_MEMORY
#define CONFIG_CMD_MISC
#define CONFIG_CMD_MII
#define CONFIG_CMD_NET
#define CONFIG_CMD_PING
#define CONFIG_CMD_REGINFO

#define CONFIG_SYS_UNIFY_CACHE

#define CONFIG_MCFFEC
#ifdef CONFIG_MCFFEC
#	define CONFIG_MII		1
#	define CONFIG_MII_INIT		1
#	define CONFIG_SYS_DISCOVER_PHY
#	define CONFIG_SYS_RX_ETH_BUFFER	8
#	define CONFIG_SYS_TX_ETH_BUFFER	8
#	define CONFIG_SYS_FEC_BUF_USE_SRAM
#	define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
#	define CONFIG_HAS_ETH1

#	define CONFIG_SYS_FEC0_PINMUX	0
#	define CONFIG_SYS_FEC0_MIIBASE	CONFIG_SYS_FEC0_IOBASE
#	define CONFIG_SYS_FEC1_PINMUX	0
#	define CONFIG_SYS_FEC1_MIIBASE	CONFIG_SYS_FEC1_IOBASE
#	define MCFFEC_TOUT_LOOP		50000

#	define CONFIG_BOOTARGS		"root=/dev/mtdblock3 rw rootfstype=jffs2"

/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
#	ifndef CONFIG_SYS_DISCOVER_PHY
#		define FECDUPLEX	FULL
#		define FECSPEED		_100BASET
#	else
#		ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
#			define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
#		endif
#	endif			/* CONFIG_SYS_DISCOVER_PHY */
#endif

#define CONFIG_MCFRTC
#undef RTC_DEBUG
#define CONFIG_SYS_RTC_CNT		(0x8000)
#define CONFIG_SYS_RTC_SETUP		(RTC_OCEN_OSCBYP | RTC_OCEN_CLKEN)

/* Timer */
#define CONFIG_MCFTMR
#undef CONFIG_MCFPIT

/* I2C */
#define CONFIG_FSL_I2C
#define CONFIG_HARD_I2C			/* I2C with hw support */
#undef CONFIG_SOFT_I2C			/* I2C bit-banged */
#define CONFIG_SYS_I2C_SPEED		80000
#define CONFIG_SYS_I2C_SLAVE		0x7F
#define CONFIG_SYS_I2C_OFFSET		0x58000
#define CONFIG_SYS_IMMR			CONFIG_SYS_MBAR

#define CONFIG_BOOTDELAY		1	/* autoboot after 5 seconds */
#define CONFIG_UDP_CHECKSUM

#ifdef CONFIG_MCFFEC
#	define CONFIG_ETHADDR	00:e0:0c:bc:e5:60
#	define CONFIG_ETH1ADDR	00:e0:0c:bc:e5:61
#	define CONFIG_IPADDR	192.162.1.2
#	define CONFIG_NETMASK	255.255.255.0
#	define CONFIG_SERVERIP	192.162.1.1
#	define CONFIG_GATEWAYIP	192.162.1.1
#	define CONFIG_OVERWRITE_ETHADDR_ONCE
#endif				/* FEC_ENET */

#define CONFIG_HOSTNAME		M53017
#define CONFIG_EXTRA_ENV_SETTINGS		\
	"netdev=eth0\0"				\
	"loadaddr=40010000\0"			\
	"u-boot=u-boot.bin\0"			\
	"load=tftp ${loadaddr) ${u-boot}\0"	\
	"upd=run load; run prog\0"		\
	"prog=prot off 0 3ffff;"		\
	"era 0 3ffff;"				\
	"cp.b ${loadaddr} 0 ${filesize};"	\
	"save\0"				\
	""

#define CONFIG_PRAM		512	/* 512 KB */
#define CONFIG_SYS_PROMPT	"-> "
#define CONFIG_SYS_LONGHELP	/* undef to save memory */

#ifdef CONFIG_CMD_KGDB
#	define CONFIG_SYS_CBSIZE	1024	/* Console I/O Buffer Size */
#else
#	define CONFIG_SYS_CBSIZE	256	/* Console I/O Buffer Size */
#endif

#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
#define CONFIG_SYS_MAXARGS	16		/* max number of cmd args */
#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Arg Buf Sz */
#define CONFIG_SYS_LOAD_ADDR	0x40010000

#define CONFIG_SYS_HZ		1000
#define CONFIG_SYS_CLK		80000000
#define CONFIG_SYS_CPU_CLK	CONFIG_SYS_CLK * 3

#define CONFIG_SYS_MBAR		0xFC000000

/*
 * Low Level Configuration Settings
 * (address mappings, register initial values, etc.)
 * You should know what you are doing if you make changes here.
 */
/*
 * Definitions for initial stack pointer and data area (in DPRAM)
 */
#define CONFIG_SYS_INIT_RAM_ADDR	0x80000000
#define CONFIG_SYS_INIT_RAM_SIZE		0x20000	/* Size of used area in internal SRAM */
#define CONFIG_SYS_INIT_RAM_CTRL	0x221
#define CONFIG_SYS_GBL_DATA_OFFSET	((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 0x10)
#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET

/*
 * Start addresses for the final memory configuration
 * (Set up by the startup code)
 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 */
#define CONFIG_SYS_SDRAM_BASE		0x40000000
#define CONFIG_SYS_SDRAM_SIZE		64	/* SDRAM size in MB */
#define CONFIG_SYS_SDRAM_CFG1		0x43711630
#define CONFIG_SYS_SDRAM_CFG2		0x56670000
#define CONFIG_SYS_SDRAM_CTRL		0xE1092000
#define CONFIG_SYS_SDRAM_EMOD		0x80010000
#define CONFIG_SYS_SDRAM_MODE		0x00CD0000

#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE + 0x400
#define CONFIG_SYS_MEMTEST_END		((CONFIG_SYS_SDRAM_SIZE - 3) << 20)

#define CONFIG_SYS_MONITOR_BASE		(CONFIG_SYS_FLASH_BASE + 0x400)
#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */

#define CONFIG_SYS_BOOTPARAMS_LEN	64*1024
#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc() */

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 8 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization ??
 */
#define CONFIG_SYS_BOOTMAPSZ		(CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
#define CONFIG_SYS_BOOTM_LEN		(CONFIG_SYS_SDRAM_SIZE << 20)

/*-----------------------------------------------------------------------
 * FLASH organization
 */
#define CONFIG_SYS_FLASH_CFI
#ifdef CONFIG_SYS_FLASH_CFI
#	define CONFIG_FLASH_CFI_DRIVER		1
#	define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1
#	define CONFIG_FLASH_SPANSION_S29WS_N	1
#	define CONFIG_SYS_FLASH_SIZE		0x1000000	/* Max size that the board might have */
#	define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
#	define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
#	define CONFIG_SYS_MAX_FLASH_SECT	137	/* max number of sectors on one chip */
#	define CONFIG_SYS_FLASH_PROTECTION	/* "Real" (hardware) sectors protection */
#endif

#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_CS0_BASE

/* Configuration for environment
 * Environment is embedded in u-boot in the second sector of the flash
 */
#define CONFIG_ENV_OFFSET		0x8000
#define CONFIG_ENV_SIZE			0x1000
#define CONFIG_ENV_SECT_SIZE		0x8000
#define CONFIG_ENV_IS_IN_FLASH		1

/*-----------------------------------------------------------------------
 * Cache Configuration
 */
#define CONFIG_SYS_CACHELINE_SIZE	16

#define ICACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
					 CONFIG_SYS_INIT_RAM_SIZE - 8)
#define DCACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
					 CONFIG_SYS_INIT_RAM_SIZE - 4)
#define CONFIG_SYS_ICACHE_INV		(CF_CACR_CINVA)
#define CONFIG_SYS_CACHE_ACR0		(CONFIG_SYS_SDRAM_BASE | \
					 CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
					 CF_ACR_EN | CF_ACR_SM_ALL)
#define CONFIG_SYS_CACHE_ICACR		(CF_CACR_EC | CF_CACR_CINVA | \
					 CF_CACR_DCM_P)

/*-----------------------------------------------------------------------
 * Chipselect bank definitions
 */
/*
 * CS0 - NOR Flash
 * CS1 - Ext SRAM
 * CS2 - Available
 * CS3 - Available
 * CS4 - Available
 * CS5 - Available
 */
#define CONFIG_SYS_CS0_BASE		0
#define CONFIG_SYS_CS0_MASK		0x00FF0001
#define CONFIG_SYS_CS0_CTRL		0x00001FA0

#define CONFIG_SYS_CS1_BASE		0xC0000000
#define CONFIG_SYS_CS1_MASK		0x00070001
#define CONFIG_SYS_CS1_CTRL		0x00001FA0

#endif				/* _M53017EVB_H */
Commit	Line	Data
536e7dac TL	1	/*
	2	* Configuation settings for the Freescale MCF53017EVB.
	3	*
	4	* Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
	5	* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
	6	*
1a459660	7	* SPDX-License-Identifier: GPL-2.0+
536e7dac TL	8	*/
	9
	10	/*
	11	* board/config.h - configuration options, board specific
	12	*/
	13
	14	#ifndef _M53017EVB_H
	15	#define _M53017EVB_H
	16
	17	/*
	18	* High Level Configuration Options
	19	* (easy to change)
	20	*/
	21	#define CONFIG_MCF5301x /* define processor family */
	22	#define CONFIG_M53015 /* define processor type */
	23
	24	#define CONFIG_MCFUART
	25	#define CONFIG_SYS_UART_PORT (0)
	26	#define CONFIG_BAUDRATE 115200
536e7dac TL	27
	28	#undef CONFIG_WATCHDOG
	29	#define CONFIG_WATCHDOG_TIMEOUT 5000
	30
	31	/* Command line configuration */
	32	#include <config_cmd_default.h>
	33
	34	#define CONFIG_CMD_CACHE
	35	#define CONFIG_CMD_DATE
	36	#define CONFIG_CMD_ELF
	37	#define CONFIG_CMD_FLASH
	38	#undef CONFIG_CMD_I2C
	39	#define CONFIG_CMD_MEMORY
	40	#define CONFIG_CMD_MISC
	41	#define CONFIG_CMD_MII
	42	#define CONFIG_CMD_NET
	43	#define CONFIG_CMD_PING
	44	#define CONFIG_CMD_REGINFO
	45
	46	#define CONFIG_SYS_UNIFY_CACHE
	47
	48	#define CONFIG_MCFFEC
	49	#ifdef CONFIG_MCFFEC
536e7dac TL	50	# define CONFIG_MII 1
	51	# define CONFIG_MII_INIT 1
	52	# define CONFIG_SYS_DISCOVER_PHY
	53	# define CONFIG_SYS_RX_ETH_BUFFER 8
9e8e9270 TL	54	# define CONFIG_SYS_TX_ETH_BUFFER 8
9e8e9270 TL	55	# define CONFIG_SYS_FEC_BUF_USE_SRAM
536e7dac TL	56	# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
	57	# define CONFIG_HAS_ETH1
	58
	59	# define CONFIG_SYS_FEC0_PINMUX 0
	60	# define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE
	61	# define CONFIG_SYS_FEC1_PINMUX 0
	62	# define CONFIG_SYS_FEC1_MIIBASE CONFIG_SYS_FEC1_IOBASE
	63	# define MCFFEC_TOUT_LOOP 50000
052c0891 TL	64
	65	# define CONFIG_BOOTARGS "root=/dev/mtdblock3 rw rootfstype=jffs2"
	66
536e7dac TL	67	/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
	68	# ifndef CONFIG_SYS_DISCOVER_PHY
	69	# define FECDUPLEX FULL
	70	# define FECSPEED _100BASET
	71	# else
	72	# ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
	73	# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
	74	# endif
	75	# endif /* CONFIG_SYS_DISCOVER_PHY */
	76	#endif
	77
	78	#define CONFIG_MCFRTC
	79	#undef RTC_DEBUG
	80	#define CONFIG_SYS_RTC_CNT (0x8000)
	81	#define CONFIG_SYS_RTC_SETUP (RTC_OCEN_OSCBYP \| RTC_OCEN_CLKEN)
	82
	83	/* Timer */
	84	#define CONFIG_MCFTMR
	85	#undef CONFIG_MCFPIT
	86
	87	/* I2C */
	88	#define CONFIG_FSL_I2C
	89	#define CONFIG_HARD_I2C /* I2C with hw support */
	90	#undef CONFIG_SOFT_I2C /* I2C bit-banged */
	91	#define CONFIG_SYS_I2C_SPEED 80000
	92	#define CONFIG_SYS_I2C_SLAVE 0x7F
	93	#define CONFIG_SYS_I2C_OFFSET 0x58000
	94	#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR
	95
	96	#define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */
	97	#define CONFIG_UDP_CHECKSUM
	98
	99	#ifdef CONFIG_MCFFEC
	100	# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60
	101	# define CONFIG_ETH1ADDR 00:e0:0c:bc:e5:61
	102	# define CONFIG_IPADDR 192.162.1.2
	103	# define CONFIG_NETMASK 255.255.255.0
	104	# define CONFIG_SERVERIP 192.162.1.1
	105	# define CONFIG_GATEWAYIP 192.162.1.1
	106	# define CONFIG_OVERWRITE_ETHADDR_ONCE
	107	#endif /* FEC_ENET */
	108
	109	#define CONFIG_HOSTNAME M53017
	110	#define CONFIG_EXTRA_ENV_SETTINGS \
	111	"netdev=eth0\0" \
	112	"loadaddr=40010000\0" \
	113	"u-boot=u-boot.bin\0" \
	114	"load=tftp ${loadaddr) ${u-boot}\0" \
	115	"upd=run load; run prog\0" \
	116	"prog=prot off 0 3ffff;" \
	117	"era 0 3ffff;" \
	118	"cp.b ${loadaddr} 0 ${filesize};" \
	119	"save\0" \
	120	""
	121
	122	#define CONFIG_PRAM 512 /* 512 KB */
	123	#define CONFIG_SYS_PROMPT "-> "
	124	#define CONFIG_SYS_LONGHELP /* undef to save memory */
	125
	126	#ifdef CONFIG_CMD_KGDB
	127	# define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
	128	#else
	129	# define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
	130	#endif
131
132	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
133	#define CONFIG_SYS_MAXARGS 16 /* max number of cmd args */
134	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Arg Buf Sz */
135	#define CONFIG_SYS_LOAD_ADDR 0x40010000
136
137	#define CONFIG_SYS_HZ 1000
138	#define CONFIG_SYS_CLK 80000000
139	#define CONFIG_SYS_CPU_CLK CONFIG_SYS_CLK * 3
140
141	#define CONFIG_SYS_MBAR 0xFC000000
142
143	/*
144	* Low Level Configuration Settings
145	* (address mappings, register initial values, etc.)
146	* You should know what you are doing if you make changes here.
147	*/
148	/*
149	* Definitions for initial stack pointer and data area (in DPRAM)
150	*/
151	#define CONFIG_SYS_INIT_RAM_ADDR 0x80000000
553f0982	152	#define CONFIG_SYS_INIT_RAM_SIZE 0x20000 /* Size of used area in internal SRAM */
9e8e9270	153	#define CONFIG_SYS_INIT_RAM_CTRL 0x221
25ddd1fb	154	#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 0x10)
536e7dac TL	155	#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
	156
	157	/*
	158	* Start addresses for the final memory configuration
	159	* (Set up by the startup code)
	160	* Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
	161	*/
	162	#define CONFIG_SYS_SDRAM_BASE 0x40000000
	163	#define CONFIG_SYS_SDRAM_SIZE 64 /* SDRAM size in MB */
	164	#define CONFIG_SYS_SDRAM_CFG1 0x43711630
	165	#define CONFIG_SYS_SDRAM_CFG2 0x56670000
9e8e9270	166	#define CONFIG_SYS_SDRAM_CTRL 0xE1092000
536e7dac TL	167	#define CONFIG_SYS_SDRAM_EMOD 0x80010000
	168	#define CONFIG_SYS_SDRAM_MODE 0x00CD0000
	169
	170	#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE + 0x400
	171	#define CONFIG_SYS_MEMTEST_END ((CONFIG_SYS_SDRAM_SIZE - 3) << 20)
	172
	173	#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
	174	#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
	175
	176	#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024
	177	#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
	178
	179	/*
	180	* For booting Linux, the board info and command line data
	181	* have to be in the first 8 MB of memory, since this is
	182	* the maximum mapped by the Linux kernel during initialization ??
	183	*/
	184	#define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
d6e4baf4	185	#define CONFIG_SYS_BOOTM_LEN (CONFIG_SYS_SDRAM_SIZE << 20)
536e7dac TL	186
	187	/*-----------------------------------------------------------------------
	188	* FLASH organization
	189	*/
	190	#define CONFIG_SYS_FLASH_CFI
	191	#ifdef CONFIG_SYS_FLASH_CFI
	192	# define CONFIG_FLASH_CFI_DRIVER 1
bbf6bbff TL	193	# define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
bbf6bbff TL	194	# define CONFIG_FLASH_SPANSION_S29WS_N 1
4567c7bf	195	# define CONFIG_SYS_FLASH_SIZE 0x1000000 /* Max size that the board might have */
536e7dac TL	196	# define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
	197	# define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
	198	# define CONFIG_SYS_MAX_FLASH_SECT 137 /* max number of sectors on one chip */
	199	# define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */
	200	#endif
	201
	202	#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE
	203
	204	/* Configuration for environment
	205	* Environment is embedded in u-boot in the second sector of the flash
	206	*/
	207	#define CONFIG_ENV_OFFSET 0x8000
	208	#define CONFIG_ENV_SIZE 0x1000
	209	#define CONFIG_ENV_SECT_SIZE 0x8000
	210	#define CONFIG_ENV_IS_IN_FLASH 1
	211
	212	/*-----------------------------------------------------------------------
	213	* Cache Configuration
	214	*/
	215	#define CONFIG_SYS_CACHELINE_SIZE 16
	216
dd9f054e	217	#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
553f0982	218	CONFIG_SYS_INIT_RAM_SIZE - 8)
dd9f054e	219	#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
553f0982	220	CONFIG_SYS_INIT_RAM_SIZE - 4)
dd9f054e TL	221	#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINVA)
	222	#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE \| \
	223	CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) \| \
	224	CF_ACR_EN \| CF_ACR_SM_ALL)
	225	#define CONFIG_SYS_CACHE_ICACR (CF_CACR_EC \| CF_CACR_CINVA \| \
	226	CF_CACR_DCM_P)
	227
536e7dac TL	228	/*-----------------------------------------------------------------------
	229	* Chipselect bank definitions
	230	*/
	231	/*
	232	* CS0 - NOR Flash
	233	* CS1 - Ext SRAM
	234	* CS2 - Available
	235	* CS3 - Available
	236	* CS4 - Available
	237	* CS5 - Available
	238	*/
	239	#define CONFIG_SYS_CS0_BASE 0
	240	#define CONFIG_SYS_CS0_MASK 0x00FF0001
	241	#define CONFIG_SYS_CS0_CTRL 0x00001FA0
	242
	243	#define CONFIG_SYS_CS1_BASE 0xC0000000
	244	#define CONFIG_SYS_CS1_MASK 0x00070001
	245	#define CONFIG_SYS_CS1_CTRL 0x00001FA0
	246
	247	#endif /* _M53017EVB_H */