]>
Commit | Line | Data |
---|---|---|
186fc4db AW |
1 | /* |
2 | * Configuation settings for the Freescale MCF54418 TWR board. | |
3 | * | |
4 | * Copyright 2010-2012 Freescale Semiconductor, Inc. | |
5 | * TsiChung Liew (Tsi-Chung.Liew@freescale.com) | |
6 | * | |
3765b3e7 | 7 | * SPDX-License-Identifier: GPL-2.0+ |
186fc4db AW |
8 | */ |
9 | ||
10 | /* | |
11 | * board/config.h - configuration options, board specific | |
12 | */ | |
13 | ||
14 | #ifndef _M54418TWR_H | |
15 | #define _M54418TWR_H | |
16 | ||
17 | /* | |
18 | * High Level Configuration Options | |
19 | * (easy to change) | |
20 | */ | |
186fc4db AW |
21 | #define CONFIG_M54418TWR /* M54418TWR board */ |
22 | ||
23 | #define CONFIG_MCFUART | |
24 | #define CONFIG_SYS_UART_PORT (0) | |
186fc4db AW |
25 | #define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } |
26 | ||
27 | #undef CONFIG_WATCHDOG | |
28 | ||
29 | #define CONFIG_TIMESTAMP /* Print image info with timestamp */ | |
30 | ||
31 | /* | |
32 | * BOOTP options | |
33 | */ | |
34 | #define CONFIG_BOOTP_BOOTFILESIZE | |
35 | #define CONFIG_BOOTP_BOOTPATH | |
36 | #define CONFIG_BOOTP_GATEWAY | |
37 | #define CONFIG_BOOTP_HOSTNAME | |
38 | ||
39 | /* Command line configuration */ | |
186fc4db | 40 | #undef CONFIG_CMD_NAND |
186fc4db AW |
41 | |
42 | /* | |
43 | * NAND FLASH | |
44 | */ | |
45 | #ifdef CONFIG_CMD_NAND | |
46 | #define CONFIG_JFFS2_NAND | |
47 | #define CONFIG_NAND_FSL_NFC | |
48 | #define CONFIG_SYS_NAND_BASE 0xFC0FC000 | |
49 | #define CONFIG_SYS_MAX_NAND_DEVICE 1 | |
50 | #define NAND_MAX_CHIPS CONFIG_SYS_MAX_NAND_DEVICE | |
51 | #define CONFIG_SYS_NAND_SELECT_DEVICE | |
186fc4db AW |
52 | #endif |
53 | ||
54 | /* Network configuration */ | |
55 | #define CONFIG_MCFFEC | |
56 | #ifdef CONFIG_MCFFEC | |
186fc4db AW |
57 | #define CONFIG_MII 1 |
58 | #define CONFIG_MII_INIT 1 | |
59 | #define CONFIG_SYS_DISCOVER_PHY | |
60 | #define CONFIG_SYS_RX_ETH_BUFFER 2 | |
e34b913a | 61 | #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN |
186fc4db AW |
62 | #define CONFIG_SYS_TX_ETH_BUFFER 2 |
63 | #define CONFIG_HAS_ETH1 | |
64 | ||
65 | #define CONFIG_SYS_FEC0_PINMUX 0 | |
66 | #define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE | |
67 | #define CONFIG_SYS_FEC1_PINMUX 0 | |
68 | #define CONFIG_SYS_FEC1_MIIBASE CONFIG_SYS_FEC0_MIIBASE | |
69 | #define MCFFEC_TOUT_LOOP 50000 | |
70 | #define CONFIG_SYS_FEC0_PHYADDR 0 | |
71 | #define CONFIG_SYS_FEC1_PHYADDR 1 | |
72 | ||
186fc4db AW |
73 | |
74 | #ifdef CONFIG_SYS_NAND_BOOT | |
75 | #define CONFIG_BOOTARGS "root=/dev/mtdblock2 rw rootfstype=jffs2 " \ | |
76 | "mtdparts=NAND:1M(u-boot)ro,7M(kernel)ro," \ | |
77 | "-(jffs2) console=ttyS0,115200" | |
78 | #else | |
79 | #define CONFIG_BOOTARGS "root=/dev/nfs rw nfsroot=" \ | |
80 | __stringify(CONFIG_SERVERIP) ":/tftpboot/" \ | |
81 | __stringify(CONFIG_IPADDR) " ip=" \ | |
82 | __stringify(CONFIG_IPADDR) ":" \ | |
83 | __stringify(CONFIG_SERVERIP)":" \ | |
84 | __stringify(CONFIG_GATEWAYIP)": " \ | |
85 | __stringify(CONFIG_NETMASK) \ | |
86 | "::eth0:off:rw console=ttyS0,115200" | |
87 | #endif | |
88 | ||
186fc4db AW |
89 | #define CONFIG_ETHPRIME "FEC0" |
90 | #define CONFIG_IPADDR 192.168.1.2 | |
91 | #define CONFIG_NETMASK 255.255.255.0 | |
92 | #define CONFIG_SERVERIP 192.168.1.1 | |
93 | #define CONFIG_GATEWAYIP 192.168.1.1 | |
94 | ||
186fc4db AW |
95 | #define CONFIG_SYS_FEC_BUF_USE_SRAM |
96 | /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */ | |
97 | #ifndef CONFIG_SYS_DISCOVER_PHY | |
98 | #define FECDUPLEX FULL | |
99 | #define FECSPEED _100BASET | |
100 | #define LINKSTATUS 1 | |
101 | #else | |
102 | #define LINKSTATUS 0 | |
103 | #ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN | |
104 | #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN | |
105 | #endif | |
106 | #endif /* CONFIG_SYS_DISCOVER_PHY */ | |
107 | #endif | |
108 | ||
109 | #define CONFIG_HOSTNAME M54418TWR | |
110 | ||
111 | #if defined(CONFIG_CF_SBF) | |
112 | /* ST Micro serial flash */ | |
113 | #define CONFIG_SYS_LOAD_ADDR2 0x40010007 | |
114 | #define CONFIG_EXTRA_ENV_SETTINGS \ | |
115 | "netdev=eth0\0" \ | |
116 | "inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0" \ | |
117 | "loadaddr=0x40010000\0" \ | |
118 | "sbfhdr=sbfhdr.bin\0" \ | |
119 | "uboot=u-boot.bin\0" \ | |
120 | "load=tftp ${loadaddr} ${sbfhdr};" \ | |
121 | "tftp " __stringify(CONFIG_SYS_LOAD_ADDR2) " ${uboot} \0" \ | |
122 | "upd=run load; run prog\0" \ | |
123 | "prog=sf probe 0:1 1000000 3;" \ | |
124 | "sf erase 0 40000;" \ | |
125 | "sf write ${loadaddr} 0 40000;" \ | |
126 | "save\0" \ | |
127 | "" | |
128 | #elif defined(CONFIG_SYS_NAND_BOOT) | |
129 | #define CONFIG_EXTRA_ENV_SETTINGS \ | |
130 | "netdev=eth0\0" \ | |
131 | "inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0" \ | |
132 | "loadaddr=0x40010000\0" \ | |
133 | "u-boot=u-boot.bin\0" \ | |
134 | "load=tftp ${loadaddr} ${u-boot};\0" \ | |
135 | "upd=run load; run prog\0" \ | |
136 | "prog=nand device 0;" \ | |
137 | "nand erase 0 40000;" \ | |
138 | "nb_update ${loadaddr} ${filesize};" \ | |
139 | "save\0" \ | |
140 | "" | |
141 | #else | |
142 | #define CONFIG_SYS_UBOOT_END 0x3FFFF | |
143 | #define CONFIG_EXTRA_ENV_SETTINGS \ | |
144 | "netdev=eth0\0" \ | |
145 | "inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0" \ | |
146 | "loadaddr=40010000\0" \ | |
147 | "u-boot=u-boot.bin\0" \ | |
148 | "load=tftp ${loadaddr) ${u-boot}\0" \ | |
149 | "upd=run load; run prog\0" \ | |
150 | "prog=prot off mram" " ;" \ | |
151 | "cp.b ${loadaddr} 0 ${filesize};" \ | |
152 | "save\0" \ | |
153 | "" | |
154 | #endif | |
155 | ||
156 | /* Realtime clock */ | |
157 | #undef CONFIG_MCFRTC | |
158 | #define CONFIG_RTC_MCFRRTC | |
159 | #define CONFIG_SYS_MCFRRTC_BASE 0xFC0A8000 | |
160 | ||
161 | /* Timer */ | |
162 | #define CONFIG_MCFTMR | |
163 | #undef CONFIG_MCFPIT | |
164 | ||
165 | /* I2c */ | |
00f792e0 | 166 | #undef CONFIG_SYS_FSL_I2C |
ea818dbb | 167 | #undef CONFIG_SYS_I2C_SOFT /* I2C bit-banged */ |
186fc4db AW |
168 | /* I2C speed and slave address */ |
169 | #define CONFIG_SYS_I2C_SPEED 80000 | |
170 | #define CONFIG_SYS_I2C_SLAVE 0x7F | |
171 | #define CONFIG_SYS_I2C_OFFSET 0x58000 | |
172 | #define CONFIG_SYS_IMMR CONFIG_SYS_MBAR | |
173 | ||
174 | /* DSPI and Serial Flash */ | |
175 | #define CONFIG_CF_SPI | |
176 | #define CONFIG_CF_DSPI | |
177 | #define CONFIG_SERIAL_FLASH | |
178 | #define CONFIG_HARD_SPI | |
179 | #define CONFIG_SYS_SBFHDR_SIZE 0x7 | |
180 | #ifdef CONFIG_CMD_SPI | |
186fc4db AW |
181 | |
182 | # define CONFIG_SYS_DSPI_CTAR0 (DSPI_CTAR_TRSZ(7) | \ | |
183 | DSPI_CTAR_PCSSCK_1CLK | \ | |
184 | DSPI_CTAR_PASC(0) | \ | |
185 | DSPI_CTAR_PDT(0) | \ | |
186 | DSPI_CTAR_CSSCK(0) | \ | |
187 | DSPI_CTAR_ASC(0) | \ | |
188 | DSPI_CTAR_DT(1)) | |
189 | # define CONFIG_SYS_DSPI_CTAR1 (CONFIG_SYS_DSPI_CTAR0) | |
190 | # define CONFIG_SYS_DSPI_CTAR2 (CONFIG_SYS_DSPI_CTAR0) | |
191 | #endif | |
192 | ||
193 | /* Input, PCI, Flexbus, and VCO */ | |
194 | #define CONFIG_EXTRA_CLOCK | |
195 | ||
196 | #define CONFIG_PRAM 2048 /* 2048 KB */ | |
197 | ||
186fc4db AW |
198 | #define CONFIG_SYS_LONGHELP /* undef to save memory */ |
199 | ||
200 | #if defined(CONFIG_CMD_KGDB) | |
201 | #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ | |
202 | #else | |
203 | #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ | |
204 | #endif | |
205 | /* Print Buffer Size */ | |
206 | #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ | |
207 | sizeof(CONFIG_SYS_PROMPT) + 16) | |
208 | #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ | |
209 | /* Boot Argument Buffer Size */ | |
210 | #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE | |
211 | ||
212 | #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x10000) | |
213 | ||
186fc4db AW |
214 | #define CONFIG_SYS_MBAR 0xFC000000 |
215 | ||
216 | /* | |
217 | * Low Level Configuration Settings | |
218 | * (address mappings, register initial values, etc.) | |
219 | * You should know what you are doing if you make changes here. | |
220 | */ | |
221 | ||
222 | /*----------------------------------------------------------------------- | |
223 | * Definitions for initial stack pointer and data area (in DPRAM) | |
224 | */ | |
225 | #define CONFIG_SYS_INIT_RAM_ADDR 0x80000000 | |
226 | /* End of used area in internal SRAM */ | |
227 | #define CONFIG_SYS_INIT_RAM_SIZE 0x10000 | |
228 | #define CONFIG_SYS_INIT_RAM_CTRL 0x221 | |
186fc4db | 229 | #define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - \ |
627b73e2 | 230 | GENERATED_GBL_DATA_SIZE) - 32) |
186fc4db AW |
231 | #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET |
232 | #define CONFIG_SYS_SBFHDR_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - 32) | |
233 | ||
234 | /*----------------------------------------------------------------------- | |
235 | * Start addresses for the final memory configuration | |
236 | * (Set up by the startup code) | |
237 | * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 | |
238 | */ | |
239 | #define CONFIG_SYS_SDRAM_BASE 0x40000000 | |
240 | #define CONFIG_SYS_SDRAM_SIZE 128 /* SDRAM size in MB */ | |
241 | ||
242 | #define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE + 0x400) | |
243 | #define CONFIG_SYS_MEMTEST_END ((CONFIG_SYS_SDRAM_SIZE - 3) << 20) | |
244 | #define CONFIG_SYS_DRAM_TEST | |
245 | ||
246 | #if defined(CONFIG_CF_SBF) || defined(CONFIG_SYS_NAND_BOOT) | |
247 | #define CONFIG_SERIAL_BOOT | |
248 | #endif | |
249 | ||
250 | #if defined(CONFIG_SERIAL_BOOT) | |
61a4392a | 251 | #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_TEXT_BASE + 0x400) |
186fc4db AW |
252 | #else |
253 | #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400) | |
254 | #endif | |
255 | ||
256 | #define CONFIG_SYS_BOOTPARAMS_LEN (64 * 1024) | |
257 | /* Reserve 256 kB for Monitor */ | |
258 | #define CONFIG_SYS_MONITOR_LEN (256 << 10) | |
259 | /* Reserve 256 kB for malloc() */ | |
260 | #define CONFIG_SYS_MALLOC_LEN (256 << 10) | |
261 | ||
262 | /* | |
263 | * For booting Linux, the board info and command line data | |
264 | * have to be in the first 8 MB of memory, since this is | |
265 | * the maximum mapped by the Linux kernel during initialization ?? | |
266 | */ | |
267 | /* Initial Memory map for Linux */ | |
268 | #define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + \ | |
269 | (CONFIG_SYS_SDRAM_SIZE << 20)) | |
270 | ||
271 | /* Configuration for environment | |
272 | * Environment is embedded in u-boot in the second sector of the flash | |
273 | */ | |
274 | #if !defined(CONFIG_SERIAL_BOOT) /*MRAM boot*/ | |
186fc4db AW |
275 | #define CONFIG_ENV_IS_IN_MRAM 1 |
276 | #define CONFIG_ENV_ADDR (0x40000 - 0x1000) /*MRAM size 40000*/ | |
277 | #define CONFIG_ENV_SIZE 0x1000 | |
278 | #endif | |
279 | ||
280 | #if defined(CONFIG_CF_SBF) | |
186fc4db AW |
281 | #define CONFIG_ENV_IS_IN_SPI_FLASH 1 |
282 | #define CONFIG_ENV_SPI_CS 1 | |
283 | #define CONFIG_ENV_OFFSET 0x40000 | |
284 | #define CONFIG_ENV_SIZE 0x2000 | |
285 | #define CONFIG_ENV_SECT_SIZE 0x10000 | |
286 | #endif | |
287 | #if defined(CONFIG_SYS_NAND_BOOT) | |
b765fce9 | 288 | #define CONFIG_ENV_IS_NOWHERE |
186fc4db AW |
289 | #define CONFIG_ENV_OFFSET 0x80000 |
290 | #define CONFIG_ENV_SIZE 0x20000 | |
291 | #define CONFIG_ENV_SECT_SIZE 0x20000 | |
292 | #endif | |
293 | #undef CONFIG_ENV_OVERWRITE | |
294 | ||
295 | /* FLASH organization */ | |
296 | #define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE | |
297 | ||
298 | #undef CONFIG_SYS_FLASH_CFI | |
299 | #ifdef CONFIG_SYS_FLASH_CFI | |
300 | ||
301 | #define CONFIG_FLASH_CFI_DRIVER 1 | |
302 | /* Max size that the board might have */ | |
303 | #define CONFIG_SYS_FLASH_SIZE 0x1000000 | |
304 | #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT | |
305 | /* max number of memory banks */ | |
306 | #define CONFIG_SYS_MAX_FLASH_BANKS 1 | |
307 | /* max number of sectors on one chip */ | |
308 | #define CONFIG_SYS_MAX_FLASH_SECT 270 | |
309 | /* "Real" (hardware) sectors protection */ | |
310 | #define CONFIG_SYS_FLASH_PROTECTION | |
311 | #define CONFIG_SYS_FLASH_CHECKSUM | |
312 | #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_CS0_BASE } | |
313 | #else | |
314 | /* max number of sectors on one chip */ | |
315 | #define CONFIG_SYS_MAX_FLASH_SECT 270 | |
316 | /* max number of sectors on one chip */ | |
317 | #define CONFIG_SYS_MAX_FLASH_BANKS 0 | |
318 | #endif | |
319 | ||
320 | /* | |
321 | * This is setting for JFFS2 support in u-boot. | |
322 | * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support. | |
323 | */ | |
324 | #ifdef CONFIG_CMD_JFFS2 | |
325 | #define CONFIG_JFFS2_DEV "nand0" | |
326 | #define CONFIG_JFFS2_PART_OFFSET (0x800000) | |
327 | #define CONFIG_CMD_MTDPARTS | |
328 | #define CONFIG_MTD_DEVICE | |
329 | #define MTDIDS_DEFAULT "nand0=m54418twr.nand" | |
330 | ||
331 | #define MTDPARTS_DEFAULT "mtdparts=m54418twr.nand:1m(data)," \ | |
332 | "7m(kernel)," \ | |
333 | "-(rootfs)" | |
334 | ||
335 | #endif | |
336 | ||
337 | #ifdef CONFIG_CMD_UBI | |
338 | #define CONFIG_CMD_MTDPARTS | |
339 | #define CONFIG_MTD_DEVICE /* needed for mtdparts command */ | |
340 | #define CONFIG_MTD_PARTITIONS /* mtdparts and UBI support */ | |
341 | #define CONFIG_RBTREE | |
342 | #define MTDIDS_DEFAULT "nand0=NAND" | |
343 | #define MTDPARTS_DEFAULT "mtdparts=NAND:1m(u-boot)," \ | |
344 | "-(ubi)" | |
345 | #endif | |
346 | /* Cache Configuration */ | |
347 | #define CONFIG_SYS_CACHELINE_SIZE 16 | |
348 | #define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ | |
349 | CONFIG_SYS_INIT_RAM_SIZE - 8) | |
350 | #define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ | |
351 | CONFIG_SYS_INIT_RAM_SIZE - 4) | |
352 | #define CONFIG_SYS_ICACHE_INV (CF_CACR_BCINVA + CF_CACR_ICINVA) | |
353 | #define CONFIG_SYS_DCACHE_INV (CF_CACR_DCINVA) | |
354 | #define CONFIG_SYS_CACHE_ACR2 (CONFIG_SYS_SDRAM_BASE | \ | |
355 | CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ | |
356 | CF_ACR_EN | CF_ACR_SM_ALL) | |
357 | #define CONFIG_SYS_CACHE_ICACR (CF_CACR_BEC | CF_CACR_IEC | \ | |
358 | CF_CACR_ICINVA | CF_CACR_EUSP) | |
359 | #define CONFIG_SYS_CACHE_DCACR ((CONFIG_SYS_CACHE_ICACR | \ | |
360 | CF_CACR_DEC | CF_CACR_DDCM_P | \ | |
361 | CF_CACR_DCINVA) & ~CF_CACR_ICINVA) | |
362 | ||
363 | #define CACR_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ | |
364 | CONFIG_SYS_INIT_RAM_SIZE - 12) | |
365 | ||
366 | /*----------------------------------------------------------------------- | |
367 | * Memory bank definitions | |
368 | */ | |
369 | /* | |
370 | * CS0 - NOR Flash 16MB | |
371 | * CS1 - Available | |
372 | * CS2 - Available | |
373 | * CS3 - Available | |
374 | * CS4 - Available | |
375 | * CS5 - Available | |
376 | */ | |
377 | ||
378 | /* Flash */ | |
379 | #define CONFIG_SYS_CS0_BASE 0x00000000 | |
380 | #define CONFIG_SYS_CS0_MASK 0x000F0101 | |
381 | #define CONFIG_SYS_CS0_CTRL 0x00001D60 | |
382 | ||
383 | #endif /* _M54418TWR_H */ |