[people/ms/u-boot.git] / include / configs / MCR3000.h

/*
 * Copyright (C) 2010-2017 CS Systemes d'Information
 * Christophe Leroy <christophe.leroy@c-s.fr>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/* High Level Configuration Options */
#define CONFIG_BOARD_EARLY_INIT_F	1	/* Call board_early_init_f */
#define CONFIG_MISC_INIT_R		1	/* Call misc_init_r	*/

#define CONFIG_EXTRA_ENV_SETTINGS					\
	"sdram_type=SDRAM\0"						\
	"flash_type=AM29LV160DB\0"					\
	"loadaddr=0x400000\0"						\
	"filename=uImage.lzma\0"					\
	"nfsroot=/opt/ofs\0"						\
	"dhcp_ip=ip=:::::eth0:dhcp\0"					\
	"console_args=console=ttyCPM0,115200N8\0"			\
	"flashboot=setenv bootargs "					\
		"${console_args} "					\
		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:"	\
		"mcr3k:eth0:off;"					\
		"${ofl_args}; "						\
		"bootm 0x04060000 - 0x04050000\0"			\
	"tftpboot=setenv bootargs "					\
		"${console_args} "					\
		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:"	\
		"mcr3k:eth0:off "					\
		"${ofl_args}; "						\
		"tftp ${loadaddr} ${filename};"				\
		"tftp 0xf00000 mcr3000.dtb;"				\
		"bootm ${loadaddr} - 0xf00000\0"			\
	"netboot=dhcp ${loadaddr} ${filename};"				\
		"tftp 0xf00000 mcr3000.dtb;"				\
		"setenv bootargs "					\
		"root=/dev/nfs rw "					\
		"${console_args} "					\
		"${dhcp_ip};"						\
		"bootm ${loadaddr} - 0xf00000\0"			\
	"nfsboot=setenv bootargs "					\
		"root=/dev/nfs rw nfsroot=${serverip}:${nfsroot} "	\
		"${console_args} "					\
		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:"	\
		"mcr3k:eth0:off;"					\
		"bootm 0x04060000 - 0x04050000\0"			\
	"dhcpboot=dhcp ${loadaddr} ${filename};"			\
		"tftp 0xf00000 mcr3000.dtb;"				\
		"setenv bootargs "					\
		"${console_args} "					\
		"${dhcp_ip} "						\
		"${ofl_args}; "						\
		"bootm ${loadaddr} - 0xf00000\0"

#define CONFIG_BOOTDELAY		5

#define CONFIG_IPADDR			192.168.0.3
#define CONFIG_SERVERIP			192.168.0.1
#define CONFIG_NETMASK			255.0.0.0

#define CONFIG_BOOTCOMMAND		"run flashboot"

#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
#undef	CONFIG_LOADS_BAUD_CHANGE	/* don't allow baudrate change	*/

#define CONFIG_WATCHDOG		1	/* watchdog enabled */

/* Miscellaneous configurable options */

#ifdef	CONFIG_HUSH_PARSER
#define	CONFIG_SYS_PROMPT_HUSH_PS2	"S3K> "
#endif

#define CONFIG_SYS_MEMTEST_START	0x00002000
#define CONFIG_SYS_MEMTEST_END		0x00800000

#define	CONFIG_SYS_LOAD_ADDR		0x200000

#define	CONFIG_SYS_HZ			1000

/* Definitions for initial stack pointer and data area (in DPRAM) */
#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
#define	CONFIG_SYS_INIT_RAM_SIZE	0x2f00
#define	CONFIG_SYS_GBL_DATA_SIZE	64
#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - \
					 CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET

/* RAM configuration (note that CONFIG_SYS_SDRAM_BASE must be zero) */
#define	CONFIG_SYS_SDRAM_BASE		0x00000000
#define SDRAM_MAX_SIZE			(32 * 1024 * 1024)

/* FLASH organization */
#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_FLASH_CFI		1
#define CONFIG_FLASH_CFI_DRIVER		1
#define CONFIG_SYS_MAX_FLASH_BANKS	1
#define CONFIG_SYS_MAX_FLASH_SECT	35
#define CONFIG_SYS_FLASH_ERASE_TOUT	120000
#define CONFIG_SYS_FLASH_WRITE_TOUT	500

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 8 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization.
 */
#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)
#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)
#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MALLOC_LEN		(4096 << 10)

/* Environment Configuration */

/* environment is in FLASH */
#define CONFIG_ENV_SECT_SIZE	(64 * 1024)
#define CONFIG_ENV_SIZE		CONFIG_ENV_SECT_SIZE
#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
#define CONFIG_ENV_OFFSET	(CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE)
#define CONFIG_ENV_OVERWRITE	1

/* Cache Configuration */
#define CONFIG_SYS_CACHELINE_SIZE	16

/* Ethernet configuration part */
#define CONFIG_SYS_DISCOVER_PHY		1
#ifdef CONFIG_MPC8XX_FEC
#define CONFIG_MII_INIT			1
#endif

/* NAND configuration part */
#define CONFIG_SYS_MAX_NAND_DEVICE	1
#define CONFIG_SYS_NAND_MAX_CHIPS	1
#define CONFIG_SYS_NAND_BASE		0x0C000000

/* Internal Definitions */

/* Boot Flags*/
#define	BOOTFLAG_COLD			0x01
#define BOOTFLAG_WARM			0x02

#endif /* __CONFIG_H */
Commit	Line	Data
53193a4f CL	1	/*
	2	* Copyright (C) 2010-2017 CS Systemes d'Information
	3	* Christophe Leroy <christophe.leroy@c-s.fr>
	4	*
	5	* SPDX-License-Identifier: GPL-2.0+
	6	*/
	7
	8	#ifndef __CONFIG_H
	9	#define __CONFIG_H
	10
	11	/* High Level Configuration Options */
	12	#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
	13	#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */
	14
	15	#define CONFIG_EXTRA_ENV_SETTINGS \
	16	"sdram_type=SDRAM\0" \
	17	"flash_type=AM29LV160DB\0" \
	18	"loadaddr=0x400000\0" \
	19	"filename=uImage.lzma\0" \
	20	"nfsroot=/opt/ofs\0" \
	21	"dhcp_ip=ip=:::::eth0:dhcp\0" \
	22	"console_args=console=ttyCPM0,115200N8\0" \
	23	"flashboot=setenv bootargs " \
	24	"${console_args} " \
	25	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:" \
	26	"mcr3k:eth0:off;" \
	27	"${ofl_args}; " \
	28	"bootm 0x04060000 - 0x04050000\0" \
	29	"tftpboot=setenv bootargs " \
	30	"${console_args} " \
	31	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:" \
	32	"mcr3k:eth0:off " \
	33	"${ofl_args}; " \
	34	"tftp ${loadaddr} ${filename};" \
	35	"tftp 0xf00000 mcr3000.dtb;" \
	36	"bootm ${loadaddr} - 0xf00000\0" \
	37	"netboot=dhcp ${loadaddr} ${filename};" \
	38	"tftp 0xf00000 mcr3000.dtb;" \
	39	"setenv bootargs " \
	40	"root=/dev/nfs rw " \
	41	"${console_args} " \
	42	"${dhcp_ip};" \
	43	"bootm ${loadaddr} - 0xf00000\0" \
	44	"nfsboot=setenv bootargs " \
	45	"root=/dev/nfs rw nfsroot=${serverip}:${nfsroot} " \
	46	"${console_args} " \
	47	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:" \
	48	"mcr3k:eth0:off;" \
	49	"bootm 0x04060000 - 0x04050000\0" \
	50	"dhcpboot=dhcp ${loadaddr} ${filename};" \
	51	"tftp 0xf00000 mcr3000.dtb;" \
	52	"setenv bootargs " \
	53	"${console_args} " \
	54	"${dhcp_ip} " \
	55	"${ofl_args}; " \
	56	"bootm ${loadaddr} - 0xf00000\0"
	57
	58	#define CONFIG_BOOTDELAY 5
	59
	60	#define CONFIG_IPADDR 192.168.0.3
	61	#define CONFIG_SERVERIP 192.168.0.1
	62	#define CONFIG_NETMASK 255.0.0.0
	63
	64	#define CONFIG_BOOTCOMMAND "run flashboot"
53193a4f CL	65
	66	#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
	67	#undef CONFIG_LOADS_BAUD_CHANGE /* don't allow baudrate change */
	68
	69	#define CONFIG_WATCHDOG 1 /* watchdog enabled */
	70
	71	/* Miscellaneous configurable options */
53193a4f	72
53193a4f CL	73	#ifdef CONFIG_HUSH_PARSER
	74	#define CONFIG_SYS_PROMPT_HUSH_PS2 "S3K> "
	75	#endif
	76
	77	#define CONFIG_SYS_MEMTEST_START 0x00002000
	78	#define CONFIG_SYS_MEMTEST_END 0x00800000
	79
	80	#define CONFIG_SYS_LOAD_ADDR 0x200000
	81
	82	#define CONFIG_SYS_HZ 1000
	83
	84	/* Definitions for initial stack pointer and data area (in DPRAM) */
	85	#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
	86	#define CONFIG_SYS_INIT_RAM_SIZE 0x2f00
	87	#define CONFIG_SYS_GBL_DATA_SIZE 64
	88	#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
	89	CONFIG_SYS_GBL_DATA_SIZE)
	90	#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
	91
	92	/* RAM configuration (note that CONFIG_SYS_SDRAM_BASE must be zero) */
	93	#define CONFIG_SYS_SDRAM_BASE 0x00000000
	94	#define SDRAM_MAX_SIZE (32 * 1024 * 1024)
	95
	96	/* FLASH organization */
	97	#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_TEXT_BASE
	98	#define CONFIG_SYS_FLASH_CFI 1
	99	#define CONFIG_FLASH_CFI_DRIVER 1
	100	#define CONFIG_SYS_MAX_FLASH_BANKS 1
	101	#define CONFIG_SYS_MAX_FLASH_SECT 35
	102	#define CONFIG_SYS_FLASH_ERASE_TOUT 120000
	103	#define CONFIG_SYS_FLASH_WRITE_TOUT 500
	104
	105	/*
	106	* For booting Linux, the board info and command line data
	107	* have to be in the first 8 MB of memory, since this is
	108	* the maximum mapped by the Linux kernel during initialization.
	109	*/
	110	#define CONFIG_SYS_BOOTMAPSZ (8 << 20)
	111	#define CONFIG_SYS_MONITOR_LEN (256 << 10)
	112	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
	113	#define CONFIG_SYS_MALLOC_LEN (4096 << 10)
	114
	115	/* Environment Configuration */
	116
	117	/* environment is in FLASH */
53193a4f CL	118	#define CONFIG_ENV_SECT_SIZE (64 * 1024)
	119	#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
	120	#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
	121	#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE)
	122	#define CONFIG_ENV_OVERWRITE 1
	123
	124	/* Cache Configuration */
	125	#define CONFIG_SYS_CACHELINE_SIZE 16
	126
	127	/* Ethernet configuration part */
	128	#define CONFIG_SYS_DISCOVER_PHY 1
	129	#ifdef CONFIG_MPC8XX_FEC
	130	#define CONFIG_MII_INIT 1
	131	#endif
	132
	133	/* NAND configuration part */
	134	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	135	#define CONFIG_SYS_NAND_MAX_CHIPS 1
	136	#define CONFIG_SYS_NAND_BASE 0x0C000000
	137
	138	/* Internal Definitions */
	139
	140	/* Boot Flags*/
	141	#define BOOTFLAG_COLD 0x01
	142	#define BOOTFLAG_WARM 0x02
	143
53193a4f	144	#endif /* __CONFIG_H */