[people/ms/u-boot.git] / include / configs / MOUSSE.h

/*
 * (C) Copyright 2000, 2001
 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 *
 * (C) Copyright 2001
 * James F. Dougherty (jfd@cs.stanford.edu)
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

/*
 *
 * Configuration settings for the MOUSSE board.
 * See also: http://www.vooha.com/
 *
 */

/* ------------------------------------------------------------------------- */

/*
 * board/config.h - configuration options, board specific
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/*
 * High Level Configuration Options
 * (easy to change)
 */

#define CONFIG_MPC824X      1
#define CONFIG_MPC8240      1
#define CONFIG_MOUSSE       1
#define CFG_ADDR_MAP_B      1
#define CONFIG_CONS_INDEX   1
#define CONFIG_BAUDRATE     9600
#if 1
#define CONFIG_BOOTCOMMAND  "tftp 100000 vmlinux.img;bootm"    /* autoboot command */
#else
#define CONFIG_BOOTCOMMAND  "bootm ffe10000"
#endif
#define CONFIG_BOOTARGS      "console=ttyS0 root=/dev/nfs rw nfsroot=209.128.93.133:/boot nfsaddrs=209.128.93.133:209.128.93.138"
#define CONFIG_BOOTDELAY     3


/*
 * BOOTP options
 */
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME


/*
 * Command line configuration.
 */
#include <config_cmd_default.h>

#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_DATE


#define CONFIG_ENV_OVERWRITE 1
#define CONFIG_ETH_ADDR      "00:10:18:10:00:06"

#define CONFIG_DOS_PARTITION  1 /* MSDOS bootable partitiion support */

#include "../board/mousse/mousse.h"

/*
 * Miscellaneous configurable options
 */
#undef CFG_LONGHELP                /* undef to save memory     */
#define CFG_PROMPT      "=>"  /* Monitor Command Prompt   */
#define CFG_CBSIZE      256        /* Console I/O Buffer Size  */
#define CFG_PBSIZE      (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
#define CFG_MAXARGS     8           /* Max number of command args   */

#define CFG_BARGSIZE    CFG_CBSIZE  /* Boot Argument Buffer Size    */
#define CFG_LOAD_ADDR   0x00100000  /* Default load address         */

/*-----------------------------------------------------------------------
 * Start addresses for the final memory configuration
 * (Set up by the startup code)
 * Please note that CFG_SDRAM_BASE _must_ start at 0
 */
#define CFG_SDRAM_BASE      0x00000000

#ifdef DEBUG
#define CFG_MONITOR_BASE    CFG_SDRAM_BASE
#else
#define CFG_MONITOR_BASE    CFG_FLASH_BASE
#endif

#ifdef DEBUG
#define CFG_MONITOR_LEN     (4 << 20)	/* lots of mem ... */
#else
#define CFG_MONITOR_LEN     (512 << 10)	/* 512K PLCC bootrom */
#endif
#define CFG_MALLOC_LEN      (2*(4096 << 10))    /* 2*4096kB for malloc()  */

#define CFG_MEMTEST_START   0x00004000	/* memtest works on      */
#define CFG_MEMTEST_END     0x02000000	/* 0 ... 32 MB in DRAM   */


#define CFG_EUMB_ADDR       0xFC000000

#define CFG_ISA_MEM         0xFD000000
#define CFG_ISA_IO          0xFE000000

#define CFG_FLASH_BASE      0xFFF00000
#define CFG_FLASH_SIZE      ((uint)(512 * 1024))
#define CFG_RESET_ADDRESS   0xFFF00100
#define FLASH_BASE0_PRELIM  0xFFF00000  /* 512K PLCC FLASH/AM29F040*/
#define FLASH_BASE0_SIZE    0x80000     /* 512K */
#define FLASH_BASE1_PRELIM  0xFFE10000  /* AMD 29LV160DB
					   1MB - 64K FLASH0 SEG =960K
					   (size=0xf0000)*/

#define CFG_BAUDRATE_TABLE  { 9600, 19200, 38400, 57600, 115200 }

/*
 * NS16550 Configuration
 */
#define CFG_NS16550
#define CFG_NS16550_SERIAL

#define CFG_NS16550_REG_SIZE	1

#define CFG_NS16550_CLK		18432000

#define CFG_NS16550_COM1	0xFFE08080

/*-----------------------------------------------------------------------
 * Definitions for initial stack pointer and data area (in DPRAM)
 */
#define CFG_INIT_RAM_ADDR CFG_SDRAM_BASE + CFG_MONITOR_LEN
#define CFG_INIT_RAM_END   0x2F00  /* End of used area in DPRAM  */
#define CFG_GBL_DATA_SIZE  64  /* size in bytes reserved for initial data */
#define CFG_GBL_DATA_OFFSET  (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET  CFG_GBL_DATA_OFFSET

/*
 * Low Level Configuration Settings
 * (address mappings, register initial values, etc.)
 * You should know what you are doing if you make changes here.
 * For the detail description refer to the MPC8240 user's manual.
 */

#define CONFIG_SYS_CLK_FREQ  33000000	/* external frequency to pll */
#define CONFIG_PLL_PCI_TO_MEM_MULTIPLIER  2
#define CFG_HZ               1000

#define CFG_ETH_DEV_FN       0x00
#define CFG_ETH_IOBASE       0x00104000


	/* Bit-field values for MCCR1.
	 */
#define CFG_ROMNAL          8
#define CFG_ROMFAL          8

	/* Bit-field values for MCCR2.
	 */
#define CFG_REFINT          0xf5     /* Refresh interval               */

	/* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4.
	 */
#define CFG_BSTOPRE         0x79

#ifdef INCLUDE_ECC
#define USE_ECC				1
#else /* INCLUDE_ECC */
#define USE_ECC				0
#endif /* INCLUDE_ECC */


	/* Bit-field values for MCCR3.
	 */
#define CFG_REFREC          8       /* Refresh to activate interval   */
#define CFG_RDLAT           (4+USE_ECC)   /* Data latancy from read command */

	/* Bit-field values for MCCR4.
	 */
#define CFG_PRETOACT        3       /* Precharge to activate interval */
#define CFG_ACTTOPRE        5       /* Activate to Precharge interval */
#define CFG_SDMODE_CAS_LAT  3       /* SDMODE CAS latancy             */
#define CFG_SDMODE_WRAP     0       /* SDMODE wrap type               */
#define CFG_SDMODE_BURSTLEN 2       /* SDMODE Burst length            */
#define CFG_ACTORW          2
#define CFG_REGISTERD_TYPE_BUFFER (1-USE_ECC)

/* Memory bank settings.
 * Only bits 20-29 are actually used from these vales to set the
 * start/end addresses. The upper two bits will always be 0, and the lower
 * 20 bits will be 0x00000 for a start address, or 0xfffff for an end
 * address. Refer to the MPC8240 book.
 */
#define CFG_RAM_SIZE        0x04000000  /* 64MB */


#define CFG_BANK0_START     0x00000000
#define CFG_BANK0_END       (CFG_RAM_SIZE - 1)
#define CFG_BANK0_ENABLE    1
#define CFG_BANK1_START     0x3ff00000
#define CFG_BANK1_END       0x3fffffff
#define CFG_BANK1_ENABLE    0
#define CFG_BANK2_START     0x3ff00000
#define CFG_BANK2_END       0x3fffffff
#define CFG_BANK2_ENABLE    0
#define CFG_BANK3_START     0x3ff00000
#define CFG_BANK3_END       0x3fffffff
#define CFG_BANK3_ENABLE    0
#define CFG_BANK4_START     0x3ff00000
#define CFG_BANK4_END       0x3fffffff
#define CFG_BANK4_ENABLE    0
#define CFG_BANK5_START     0x3ff00000
#define CFG_BANK5_END       0x3fffffff
#define CFG_BANK5_ENABLE    0
#define CFG_BANK6_START     0x3ff00000
#define CFG_BANK6_END       0x3fffffff
#define CFG_BANK6_ENABLE    0
#define CFG_BANK7_START     0x3ff00000
#define CFG_BANK7_END       0x3fffffff
#define CFG_BANK7_ENABLE    0

#define CFG_ODCR            0x7f


#define CFG_PGMAX           0x32 /* how long the 8240 reatins the currently accessed page in memory
				    see 8240 book for details*/
#define PCI_MEM_SPACE1_START	0x80000000
#define PCI_MEM_SPACE2_START	0xfd000000

/* IBAT/DBAT Configuration */
/* Ram: 64MB, starts at address-0, r/w instruction/data */
#define CFG_IBAT0U      (CFG_SDRAM_BASE | BATU_BL_64M | BATU_VS | BATU_VP)
#define CFG_IBAT0L      (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
#define CFG_DBAT0U      CFG_IBAT0U
#define CFG_DBAT0L      CFG_IBAT0L

/* MPLD/Port-X I/O Space : data and instruction read/write,  cache-inhibit */
#define CFG_IBAT1U      (PORTX_DEV_BASE | BATU_BL_128M | BATU_VS | BATU_VP)
#if 0
#define CFG_IBAT1L      (PORTX_DEV_BASE | BATL_PP_10  | BATL_MEMCOHERENCE |\
			 BATL_WRITETHROUGH | BATL_CACHEINHIBIT)
#else
#define CFG_IBAT1L      (PORTX_DEV_BASE | BATL_PP_10 |BATL_CACHEINHIBIT)
#endif
#define CFG_DBAT1U	CFG_IBAT1U
#define CFG_DBAT1L	CFG_IBAT1L

/* PCI Memory region 1: 0x8XXX_XXXX PCI Mem space: EUMBAR, etc - 16MB */
#define CFG_IBAT2U	(PCI_MEM_SPACE1_START|BATU_BL_16M | BATU_VS | BATU_VP)
#define CFG_IBAT2L	(PCI_MEM_SPACE1_START|BATL_PP_10 | BATL_GUARDEDSTORAGE|BATL_CACHEINHIBIT)
#define CFG_DBAT2U      CFG_IBAT2U
#define CFG_DBAT2L      CFG_IBAT2L

/* PCI Memory region 2: PCI Devices in 0xFD space */
#define CFG_IBAT3U	(PCI_MEM_SPACE2_START|BATU_BL_16M | BATU_VS | BATU_VP)
#define CFG_IBAT3L	(PCI_MEM_SPACE2_START|BATL_PP_10 | BATL_GUARDEDSTORAGE | BATL_CACHEINHIBIT)
#define CFG_DBAT3U      CFG_IBAT3U
#define CFG_DBAT3L      CFG_IBAT3L


/*
 * For booting Linux, the board info and command line data
 * have to be in the first 8 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization.
 */
#define CFG_BOOTMAPSZ       (8 << 20)   /* Initial Memory map for Linux */

/*-----------------------------------------------------------------------
 * FLASH organization
 */
#define CFG_MAX_FLASH_BANKS     3       /* Max number of flash banks         */
#define CFG_MAX_FLASH_SECT      64      /* Max number of sectors in one bank */

#define CFG_FLASH_ERASE_TOUT    120000  /* Timeout for Flash Erase (in ms)   */
#define CFG_FLASH_WRITE_TOUT    500     /* Timeout for Flash Write (in ms)   */

#if 0
#define	CONFIG_ENV_IS_IN_FLASH	    1
#define CFG_ENV_OFFSET          0x8000  /* Offset of the Environment Sector	*/
#define CFG_ENV_SIZE            0x4000  /* Size of the Environment Sector    */
#else
#define CONFIG_ENV_IS_IN_NVRAM          1
#define CFG_ENV_ADDR            NV_OFF_U_BOOT_ADDR /* PortX NVM Free addr*/
#define CFG_ENV_OFFSET          CFG_ENV_ADDR
#define CFG_ENV_SIZE            NV_U_BOOT_ENV_SIZE /* 2K */
#endif
/*-----------------------------------------------------------------------
 * Cache Configuration
 */
#define CFG_CACHELINE_SIZE  16


/*
 * Internal Definitions
 *
 * Boot Flags
 */
#define BOOTFLAG_COLD           0x01    /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM           0x02    /* Software reboot                  */

/* Localizations */
#if 0
#define CONFIG_ETHADDR          0:0:0:0:1:d
#define CONFIG_IPADDR           172.16.40.113
#define CONFIG_SERVERIP         172.16.40.111
#else
#define CONFIG_ETHADDR          0:0:0:0:1:d
#define CONFIG_IPADDR           209.128.93.138
#define CONFIG_SERVERIP         209.128.93.133
#endif

/*-----------------------------------------------------------------------
 * PCI stuff
 *-----------------------------------------------------------------------
 */
#define CONFIG_PCI			/* include pci support			*/
#undef CONFIG_PCI_PNP

#define CONFIG_NET_MULTI		/* Multi ethernet cards support		*/

#define CONFIG_TULIP

#endif  /* __CONFIG_H */
Commit	Line	Data
fe8c2806 WD	1	/*
	2	* (C) Copyright 2000, 2001
	3	* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
	4	*
	5	* (C) Copyright 2001
	6	* James F. Dougherty (jfd@cs.stanford.edu)
	7	*
	8	* See file CREDITS for list of people who contributed to this
	9	* project.
	10	*
	11	* This program is free software; you can redistribute it and/or
	12	* modify it under the terms of the GNU General Public License as
	13	* published by the Free Software Foundation; either version 2 of
	14	* the License, or (at your option) any later version.
	15	*
	16	* This program is distributed in the hope that it will be useful,
	17	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	18	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	19	* GNU General Public License for more details.
	20	*
	21	* You should have received a copy of the GNU General Public License
	22	* along with this program; if not, write to the Free Software
	23	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	24	* MA 02111-1307 USA
	25	*/
	26
	27	/*
	28	*
	29	* Configuration settings for the MOUSSE board.
	30	* See also: http://www.vooha.com/
	31	*
	32	*/
	33
	34	/* ------------------------------------------------------------------------- */
	35
	36	/*
	37	* board/config.h - configuration options, board specific
	38	*/
	39
	40	#ifndef __CONFIG_H
	41	#define __CONFIG_H
	42
	43	/*
	44	* High Level Configuration Options
	45	* (easy to change)
	46	*/
	47
	48	#define CONFIG_MPC824X 1
	49	#define CONFIG_MPC8240 1
	50	#define CONFIG_MOUSSE 1
	51	#define CFG_ADDR_MAP_B 1
	52	#define CONFIG_CONS_INDEX 1
	53	#define CONFIG_BAUDRATE 9600
	54	#if 1
	55	#define CONFIG_BOOTCOMMAND "tftp 100000 vmlinux.img;bootm" /* autoboot command */
	56	#else
	57	#define CONFIG_BOOTCOMMAND "bootm ffe10000"
	58	#endif
	59	#define CONFIG_BOOTARGS "console=ttyS0 root=/dev/nfs rw nfsroot=209.128.93.133:/boot nfsaddrs=209.128.93.133:209.128.93.138"
	60	#define CONFIG_BOOTDELAY 3
8353e139 JL	61
8353e139 JL	62
659e2f67 JL	63	/*
	64	* BOOTP options
	65	*/
	66	#define CONFIG_BOOTP_BOOTFILESIZE
	67	#define CONFIG_BOOTP_BOOTPATH
	68	#define CONFIG_BOOTP_GATEWAY
	69	#define CONFIG_BOOTP_HOSTNAME
	70
	71
8353e139 JL	72	/*
	73	* Command line configuration.
	74	*/
	75	#include <config_cmd_default.h>
	76
	77	#define CONFIG_CMD_ASKENV
	78	#define CONFIG_CMD_DATE
	79
	80
fe8c2806 WD	81	#define CONFIG_ENV_OVERWRITE 1
	82	#define CONFIG_ETH_ADDR "00:10:18:10:00:06"
	83
	84	#define CONFIG_DOS_PARTITION 1 /* MSDOS bootable partitiion support */
8353e139	85
fe8c2806 WD	86	#include "../board/mousse/mousse.h"
	87
	88	/*
	89	* Miscellaneous configurable options
	90	*/
	91	#undef CFG_LONGHELP /* undef to save memory */
	92	#define CFG_PROMPT "=>" /* Monitor Command Prompt */
	93	#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
	94	#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
	95	#define CFG_MAXARGS 8 /* Max number of command args */
	96
	97	#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
	98	#define CFG_LOAD_ADDR 0x00100000 /* Default load address */
	99
	100	/*-----------------------------------------------------------------------
	101	* Start addresses for the final memory configuration
	102	* (Set up by the startup code)
	103	* Please note that CFG_SDRAM_BASE _must_ start at 0
	104	*/
	105	#define CFG_SDRAM_BASE 0x00000000
	106
	107	#ifdef DEBUG
	108	#define CFG_MONITOR_BASE CFG_SDRAM_BASE
	109	#else
	110	#define CFG_MONITOR_BASE CFG_FLASH_BASE
	111	#endif
	112
	113	#ifdef DEBUG
	114	#define CFG_MONITOR_LEN (4 << 20) /* lots of mem ... */
	115	#else
	116	#define CFG_MONITOR_LEN (512 << 10) /* 512K PLCC bootrom */
	117	#endif
	118	#define CFG_MALLOC_LEN (2(4096 << 10)) / 24096kB for malloc() /
	119
	120	#define CFG_MEMTEST_START 0x00004000 /* memtest works on */
	121	#define CFG_MEMTEST_END 0x02000000 /* 0 ... 32 MB in DRAM */
	122
	123
	124	#define CFG_EUMB_ADDR 0xFC000000
	125
	126	#define CFG_ISA_MEM 0xFD000000
	127	#define CFG_ISA_IO 0xFE000000
	128
	129	#define CFG_FLASH_BASE 0xFFF00000
	130	#define CFG_FLASH_SIZE ((uint)(512 * 1024))
	131	#define CFG_RESET_ADDRESS 0xFFF00100
	132	#define FLASH_BASE0_PRELIM 0xFFF00000 /* 512K PLCC FLASH/AM29F040*/
	133	#define FLASH_BASE0_SIZE 0x80000 /* 512K */
	134	#define FLASH_BASE1_PRELIM 0xFFE10000 /* AMD 29LV160DB
	135	1MB - 64K FLASH0 SEG =960K
	136	(size=0xf0000)*/
	137
	138	#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
	139
	140	/*
	141	* NS16550 Configuration
	142	*/
	143	#define CFG_NS16550
	144	#define CFG_NS16550_SERIAL
	145
	146	#define CFG_NS16550_REG_SIZE 1
	147
	148	#define CFG_NS16550_CLK 18432000
	149
150	#define CFG_NS16550_COM1 0xFFE08080
151
152	/*-----------------------------------------------------------------------
153	* Definitions for initial stack pointer and data area (in DPRAM)
154	*/
155	#define CFG_INIT_RAM_ADDR CFG_SDRAM_BASE + CFG_MONITOR_LEN
156	#define CFG_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */
157	#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
158	#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
159	#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
160
161	/*
162	* Low Level Configuration Settings
163	* (address mappings, register initial values, etc.)
164	* You should know what you are doing if you make changes here.
165	* For the detail description refer to the MPC8240 user's manual.
166	*/
167
168	#define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */
169	#define CONFIG_PLL_PCI_TO_MEM_MULTIPLIER 2
170	#define CFG_HZ 1000
171
172	#define CFG_ETH_DEV_FN 0x00
173	#define CFG_ETH_IOBASE 0x00104000
174
175
176	/* Bit-field values for MCCR1.
177	*/
178	#define CFG_ROMNAL 8
179	#define CFG_ROMFAL 8
180
181	/* Bit-field values for MCCR2.
182	*/
183	#define CFG_REFINT 0xf5 /* Refresh interval */
184
185	/* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4.
186	*/
187	#define CFG_BSTOPRE 0x79
188
189	#ifdef INCLUDE_ECC
190	#define USE_ECC 1
191	#else /* INCLUDE_ECC */
192	#define USE_ECC 0
193	#endif /* INCLUDE_ECC */
194
195
196	/* Bit-field values for MCCR3.
197	*/
198	#define CFG_REFREC 8 /* Refresh to activate interval */
199	#define CFG_RDLAT (4+USE_ECC) /* Data latancy from read command */
200
201	/* Bit-field values for MCCR4.
202	*/
203	#define CFG_PRETOACT 3 /* Precharge to activate interval */
204	#define CFG_ACTTOPRE 5 /* Activate to Precharge interval */
205	#define CFG_SDMODE_CAS_LAT 3 /* SDMODE CAS latancy */
206	#define CFG_SDMODE_WRAP 0 /* SDMODE wrap type */
207	#define CFG_SDMODE_BURSTLEN 2 /* SDMODE Burst length */
208	#define CFG_ACTORW 2
209	#define CFG_REGISTERD_TYPE_BUFFER (1-USE_ECC)
210
211	/* Memory bank settings.
212	* Only bits 20-29 are actually used from these vales to set the
213	* start/end addresses. The upper two bits will always be 0, and the lower
214	* 20 bits will be 0x00000 for a start address, or 0xfffff for an end
215	* address. Refer to the MPC8240 book.
216	*/
217	#define CFG_RAM_SIZE 0x04000000 /* 64MB */
218
219
220	#define CFG_BANK0_START 0x00000000
221	#define CFG_BANK0_END (CFG_RAM_SIZE - 1)
222	#define CFG_BANK0_ENABLE 1
223	#define CFG_BANK1_START 0x3ff00000
224	#define CFG_BANK1_END 0x3fffffff
225	#define CFG_BANK1_ENABLE 0
226	#define CFG_BANK2_START 0x3ff00000
227	#define CFG_BANK2_END 0x3fffffff
228	#define CFG_BANK2_ENABLE 0
229	#define CFG_BANK3_START 0x3ff00000
230	#define CFG_BANK3_END 0x3fffffff
231	#define CFG_BANK3_ENABLE 0
232	#define CFG_BANK4_START 0x3ff00000
233	#define CFG_BANK4_END 0x3fffffff
234	#define CFG_BANK4_ENABLE 0
235	#define CFG_BANK5_START 0x3ff00000
236	#define CFG_BANK5_END 0x3fffffff
237	#define CFG_BANK5_ENABLE 0
238	#define CFG_BANK6_START 0x3ff00000
239	#define CFG_BANK6_END 0x3fffffff
240	#define CFG_BANK6_ENABLE 0
241	#define CFG_BANK7_START 0x3ff00000
242	#define CFG_BANK7_END 0x3fffffff
243	#define CFG_BANK7_ENABLE 0
244
245	#define CFG_ODCR 0x7f
246
247
248	#define CFG_PGMAX 0x32 /* how long the 8240 reatins the currently accessed page in memory
8bde7f77	249	see 8240 book for details*/
fe8c2806 WD	250	#define PCI_MEM_SPACE1_START 0x80000000
	251	#define PCI_MEM_SPACE2_START 0xfd000000
	252
	253	/* IBAT/DBAT Configuration */
	254	/* Ram: 64MB, starts at address-0, r/w instruction/data */
	255	#define CFG_IBAT0U (CFG_SDRAM_BASE \| BATU_BL_64M \| BATU_VS \| BATU_VP)
	256	#define CFG_IBAT0L (CFG_SDRAM_BASE \| BATL_PP_10 \| BATL_MEMCOHERENCE)
	257	#define CFG_DBAT0U CFG_IBAT0U
	258	#define CFG_DBAT0L CFG_IBAT0L
	259
	260	/* MPLD/Port-X I/O Space : data and instruction read/write, cache-inhibit */
	261	#define CFG_IBAT1U (PORTX_DEV_BASE \| BATU_BL_128M \| BATU_VS \| BATU_VP)
	262	#if 0
	263	#define CFG_IBAT1L (PORTX_DEV_BASE \| BATL_PP_10 \| BATL_MEMCOHERENCE \|\
	264	BATL_WRITETHROUGH \| BATL_CACHEINHIBIT)
	265	#else
	266	#define CFG_IBAT1L (PORTX_DEV_BASE \| BATL_PP_10 \|BATL_CACHEINHIBIT)
	267	#endif
53677ef1 WD	268	#define CFG_DBAT1U CFG_IBAT1U
53677ef1 WD	269	#define CFG_DBAT1L CFG_IBAT1L
fe8c2806 WD	270
fe8c2806 WD	271	/* PCI Memory region 1: 0x8XXX_XXXX PCI Mem space: EUMBAR, etc - 16MB */
53677ef1 WD	272	#define CFG_IBAT2U (PCI_MEM_SPACE1_START\|BATU_BL_16M \| BATU_VS \| BATU_VP)
53677ef1 WD	273	#define CFG_IBAT2L (PCI_MEM_SPACE1_START\|BATL_PP_10 \| BATL_GUARDEDSTORAGE\|BATL_CACHEINHIBIT)
fe8c2806 WD	274	#define CFG_DBAT2U CFG_IBAT2U
	275	#define CFG_DBAT2L CFG_IBAT2L
	276
	277	/* PCI Memory region 2: PCI Devices in 0xFD space */
53677ef1 WD	278	#define CFG_IBAT3U (PCI_MEM_SPACE2_START\|BATU_BL_16M \| BATU_VS \| BATU_VP)
53677ef1 WD	279	#define CFG_IBAT3L (PCI_MEM_SPACE2_START\|BATL_PP_10 \| BATL_GUARDEDSTORAGE \| BATL_CACHEINHIBIT)
fe8c2806 WD	280	#define CFG_DBAT3U CFG_IBAT3U
	281	#define CFG_DBAT3L CFG_IBAT3L
	282
	283
	284	/*
	285	* For booting Linux, the board info and command line data
	286	* have to be in the first 8 MB of memory, since this is
	287	* the maximum mapped by the Linux kernel during initialization.
	288	*/
	289	#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
	290
	291	/*-----------------------------------------------------------------------
	292	* FLASH organization
	293	*/
	294	#define CFG_MAX_FLASH_BANKS 3 /* Max number of flash banks */
	295	#define CFG_MAX_FLASH_SECT 64 /* Max number of sectors in one bank */
	296
	297	#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
	298	#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
	299
	300	#if 0
5a1aceb0	301	#define CONFIG_ENV_IS_IN_FLASH 1
53677ef1	302	#define CFG_ENV_OFFSET 0x8000 /* Offset of the Environment Sector */
fe8c2806 WD	303	#define CFG_ENV_SIZE 0x4000 /* Size of the Environment Sector */
fe8c2806 WD	304	#else
9314cee6	305	#define CONFIG_ENV_IS_IN_NVRAM 1
fe8c2806 WD	306	#define CFG_ENV_ADDR NV_OFF_U_BOOT_ADDR /* PortX NVM Free addr*/
	307	#define CFG_ENV_OFFSET CFG_ENV_ADDR
	308	#define CFG_ENV_SIZE NV_U_BOOT_ENV_SIZE /* 2K */
	309	#endif
	310	/*-----------------------------------------------------------------------
	311	* Cache Configuration
	312	*/
	313	#define CFG_CACHELINE_SIZE 16
	314
	315
fe8c2806 WD	316	/*
	317	* Internal Definitions
	318	*
	319	* Boot Flags
	320	*/
	321	#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
	322	#define BOOTFLAG_WARM 0x02 /* Software reboot */
	323
	324	/* Localizations */
	325	#if 0
	326	#define CONFIG_ETHADDR 0:0:0:0:1:d
	327	#define CONFIG_IPADDR 172.16.40.113
	328	#define CONFIG_SERVERIP 172.16.40.111
	329	#else
	330	#define CONFIG_ETHADDR 0:0:0:0:1:d
	331	#define CONFIG_IPADDR 209.128.93.138
	332	#define CONFIG_SERVERIP 209.128.93.133
	333	#endif
	334
	335	/*-----------------------------------------------------------------------
	336	* PCI stuff
	337	*-----------------------------------------------------------------------
	338	*/
	339	#define CONFIG_PCI /* include pci support */
	340	#undef CONFIG_PCI_PNP
	341
53677ef1	342	#define CONFIG_NET_MULTI /* Multi ethernet cards support */
fe8c2806 WD	343
	344	#define CONFIG_TULIP
	345
	346	#endif /* __CONFIG_H */