[people/ms/u-boot.git] / include / configs / MPC832XEMDS.h

/*
 * Copyright (C) 2006 Freescale Semiconductor, Inc.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/*
 * High Level Configuration Options
 */
#define CONFIG_E300		1	/* E300 family */
#define CONFIG_QE		1	/* Has QE */
#define CONFIG_MPC83XX		1	/* MPC83xx family */
#define CONFIG_MPC832X		1	/* MPC832x CPU specific */
#define CONFIG_MPC832XEMDS	1	/* MPC832XEMDS board specific */
#undef CONFIG_PQ_MDS_PIB /* POWERQUICC MDS Platform IO Board */
#undef CONFIG_PQ_MDS_PIB_ATM	/* QOC3 ATM card */

/*
 * System Clock Setup
 */
#ifdef CONFIG_PCISLAVE
#define CONFIG_83XX_PCICLK	66000000	/* in HZ */
#else
#define CONFIG_83XX_CLKIN	66000000	/* in Hz */
#endif

#ifndef CONFIG_SYS_CLK_FREQ
#define CONFIG_SYS_CLK_FREQ	66000000
#endif

/*
 * Hardware Reset Configuration Word
 */
#define CFG_HRCW_LOW (\
	HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
	HRCWL_DDR_TO_SCB_CLK_2X1 |\
	HRCWL_VCO_1X2 |\
	HRCWL_CSB_TO_CLKIN_2X1 |\
	HRCWL_CORE_TO_CSB_2X1 |\
	HRCWL_CE_PLL_VCO_DIV_2 |\
	HRCWL_CE_PLL_DIV_1X1 |\
	HRCWL_CE_TO_PLL_1X3)

#ifdef CONFIG_PCISLAVE
#define CFG_HRCW_HIGH (\
	HRCWH_PCI_AGENT |\
	HRCWH_PCI1_ARBITER_DISABLE |\
	HRCWH_CORE_ENABLE |\
	HRCWH_FROM_0XFFF00100 |\
	HRCWH_BOOTSEQ_DISABLE |\
	HRCWH_SW_WATCHDOG_DISABLE |\
	HRCWH_ROM_LOC_LOCAL_16BIT |\
	HRCWH_BIG_ENDIAN |\
	HRCWH_LALE_NORMAL)
#else
#define CFG_HRCW_HIGH (\
	HRCWH_PCI_HOST |\
	HRCWH_PCI1_ARBITER_ENABLE |\
	HRCWH_CORE_ENABLE |\
	HRCWH_FROM_0X00000100 |\
	HRCWH_BOOTSEQ_DISABLE |\
	HRCWH_SW_WATCHDOG_DISABLE |\
	HRCWH_ROM_LOC_LOCAL_16BIT |\
	HRCWH_BIG_ENDIAN |\
	HRCWH_LALE_NORMAL)
#endif

/*
 * System IO Config
 */
#define CFG_SICRL		0x00000000

#define CONFIG_BOARD_EARLY_INIT_F	/* call board_pre_init */
#define CONFIG_BOARD_EARLY_INIT_R

/*
 * IMMR new address
 */
#define CFG_IMMR		0xE0000000

/*
 * DDR Setup
 */
#define CFG_DDR_BASE		0x00000000	/* DDR is system memory */
#define CFG_SDRAM_BASE		CFG_DDR_BASE
#define CFG_DDR_SDRAM_BASE	CFG_DDR_BASE
#define CFG_DDRCDR		0x73000002	/* DDR II voltage is 1.8V */

#undef CONFIG_SPD_EEPROM
#if defined(CONFIG_SPD_EEPROM)
/* Determine DDR configuration from I2C interface
 */
#define SPD_EEPROM_ADDRESS	0x51	/* DDR SODIMM */
#else
/* Manually set up DDR parameters
 */
#define CFG_DDR_SIZE		128	/* MB */
#define CFG_DDR_CS0_CONFIG	0x80840102
#define CFG_DDR_TIMING_0	0x00220802
#define CFG_DDR_TIMING_1	0x3935d322
#define CFG_DDR_TIMING_2	0x0f9048ca
#define CFG_DDR_TIMING_3	0x00000000
#define CFG_DDR_CLK_CNTL	0x02000000
#define CFG_DDR_MODE		0x44400232
#define CFG_DDR_MODE2		0x8000c000
#define CFG_DDR_INTERVAL	0x03200064
#define CFG_DDR_CS0_BNDS	0x00000007
#define CFG_DDR_SDRAM_CFG	0x43080000
#define CFG_DDR_SDRAM_CFG2	0x00401000
#endif

/*
 * Memory test
 */
#undef CFG_DRAM_TEST		/* memory test, takes time */
#define CFG_MEMTEST_START	0x00000000	/* memtest region */
#define CFG_MEMTEST_END		0x00100000

/*
 * The reserved memory
 */
#define CFG_MONITOR_BASE	TEXT_BASE	/* start of monitor */

#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
#define CFG_RAMBOOT
#else
#undef  CFG_RAMBOOT
#endif

/* CFG_MONITOR_LEN must be a multiple of CFG_ENV_SECT_SIZE */
#define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Mon */
#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserved for malloc */

/*
 * Initial RAM Base Address Setup
 */
#define CFG_INIT_RAM_LOCK	1
#define CFG_INIT_RAM_ADDR	0xE6000000	/* Initial RAM address */
#define CFG_INIT_RAM_END	0x1000		/* End of used area in RAM */
#define CFG_GBL_DATA_SIZE	0x100		/* num bytes initial data */
#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)

/*
 * Local Bus Configuration & Clock Setup
 */
#define CFG_LCRR		(LCRR_DBYP | LCRR_CLKDIV_2)
#define CFG_LBC_LBCR		0x00000000

/*
 * FLASH on the Local Bus
 */
#define CFG_FLASH_CFI		/* use the Common Flash Interface */
#define CFG_FLASH_CFI_DRIVER	/* use the CFI driver */
#define CFG_FLASH_BASE		0xFE000000	/* FLASH base address */
#define CFG_FLASH_SIZE		16	/* FLASH size is 16M */

#define CFG_LBLAWBAR0_PRELIM	CFG_FLASH_BASE	/* Window base at flash base */
#define CFG_LBLAWAR0_PRELIM	0x80000018	/* 32MB window size */

#define CFG_BR0_PRELIM	(CFG_FLASH_BASE |	/* Flash Base address */ \
			(2 << BR_PS_SHIFT) |	/* 16 bit port size */ \
			BR_V)			/* valid */
#define CFG_OR0_PRELIM		0xfe006ff7	/* 16MB Flash size */

#define CFG_MAX_FLASH_BANKS	1		/* number of banks */
#define CFG_MAX_FLASH_SECT	128		/* sectors per device */

#undef CFG_FLASH_CHECKSUM

/*
 * BCSR on the Local Bus
 */
#define CFG_BCSR		0xF8000000
#define CFG_LBLAWBAR1_PRELIM	CFG_BCSR	/* Access window base at BCSR base */
#define CFG_LBLAWAR1_PRELIM	0x8000000E	/* Access window size 32K */

#define CFG_BR1_PRELIM		(CFG_BCSR|0x00000801)	/* Port size=8bit, MSEL=GPCM */
#define CFG_OR1_PRELIM		0xFFFFE9f7	/* length 32K */

/*
 * SDRAM on the Local Bus
 */
#undef CFG_LB_SDRAM		/* The board has not SRDAM on local bus */

#ifdef CFG_LB_SDRAM
#define CFG_LBC_SDRAM_BASE	0xF0000000	/* SDRAM base address */
#define CFG_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB */

#define CFG_LBLAWBAR2_PRELIM	CFG_LBC_SDRAM_BASE
#define CFG_LBLAWAR2_PRELIM	0x80000019	/* 64MB */

/*local bus BR2, OR2 definition for SDRAM if soldered on the EPB board */
/*
 * Base Register 2 and Option Register 2 configure SDRAM.
 * The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000.
 *
 * For BR2, need:
 *    Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
 *    port size = 32-bits = BR2[19:20] = 11
 *    no parity checking = BR2[21:22] = 00
 *    SDRAM for MSEL = BR2[24:26] = 011
 *    Valid = BR[31] = 1
 *
 * 0    4    8    12   16   20   24   28
 * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861
 *
 * CFG_LBC_SDRAM_BASE should be masked and OR'ed into
 * the top 17 bits of BR2.
 */

#define CFG_BR2_PRELIM	0xf0001861	/*Port size=32bit, MSEL=SDRAM */

/*
 * The SDRAM size in MB, CFG_LBC_SDRAM_SIZE, is 64.
 *
 * For OR2, need:
 *    64MB mask for AM, OR2[0:7] = 1111 1100
 *                 XAM, OR2[17:18] = 11
 *    9 columns OR2[19-21] = 010
 *    13 rows   OR2[23-25] = 100
 *    EAD set for extra time OR[31] = 1
 *
 * 0    4    8    12   16   20   24   28
 * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901
 */

#define CFG_OR2_PRELIM	0xfc006901

#define CFG_LBC_LSRT	0x32000000	/* LB sdram refresh timer, about 6us */
#define CFG_LBC_MRTPR	0x20000000	/* LB refresh timer prescal, 266MHz/32 */

/*
 * LSDMR masks
 */
#define CFG_LBC_LSDMR_OP_NORMAL	(0 << (31 - 4))
#define CFG_LBC_LSDMR_OP_ARFRSH	(1 << (31 - 4))
#define CFG_LBC_LSDMR_OP_SRFRSH	(2 << (31 - 4))
#define CFG_LBC_LSDMR_OP_MRW	(3 << (31 - 4))
#define CFG_LBC_LSDMR_OP_PRECH	(4 << (31 - 4))
#define CFG_LBC_LSDMR_OP_PCHALL	(5 << (31 - 4))
#define CFG_LBC_LSDMR_OP_ACTBNK	(6 << (31 - 4))
#define CFG_LBC_LSDMR_OP_RWINV	(7 << (31 - 4))

#define CFG_LBC_LSDMR_COMMON	0x0063b723

/*
 * SDRAM Controller configuration sequence.
 */
#define CFG_LBC_LSDMR_1		( CFG_LBC_LSDMR_COMMON \
				| CFG_LBC_LSDMR_OP_PCHALL)
#define CFG_LBC_LSDMR_2		( CFG_LBC_LSDMR_COMMON \
				| CFG_LBC_LSDMR_OP_ARFRSH)
#define CFG_LBC_LSDMR_3		( CFG_LBC_LSDMR_COMMON \
				| CFG_LBC_LSDMR_OP_ARFRSH)
#define CFG_LBC_LSDMR_4		( CFG_LBC_LSDMR_COMMON \
				| CFG_LBC_LSDMR_OP_MRW)
#define CFG_LBC_LSDMR_5		( CFG_LBC_LSDMR_COMMON \
				| CFG_LBC_LSDMR_OP_NORMAL)

#endif

/*
 * Windows to access PIB via local bus
 */
#define CFG_LBLAWBAR3_PRELIM	0xf8008000	/* windows base 0xf8008000 */
#define CFG_LBLAWAR3_PRELIM	0x8000000f	/* windows size 64KB */

/*
 * CS2 on Local Bus, to PIB
 */
#define CFG_BR2_PRELIM	0xf8008801	/* CS2 base address at 0xf8008000 */
#define CFG_OR2_PRELIM	0xffffe9f7	/* size 32KB, port size 8bit, GPCM */

/*
 * CS3 on Local Bus, to PIB
 */
#define CFG_BR3_PRELIM	0xf8010801	/* CS3 base address at 0xf8010000 */
#define CFG_OR3_PRELIM	0xffffe9f7	/* size 32KB, port size 8bit, GPCM */

/*
 * Serial Port
 */
#define CONFIG_CONS_INDEX	1
#undef CONFIG_SERIAL_SOFTWARE_FIFO
#define CFG_NS16550
#define CFG_NS16550_SERIAL
#define CFG_NS16550_REG_SIZE	1
#define CFG_NS16550_CLK		get_bus_freq(0)

#define CFG_BAUDRATE_TABLE  \
	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}

#define CFG_NS16550_COM1	(CFG_IMMR+0x4500)
#define CFG_NS16550_COM2	(CFG_IMMR+0x4600)

#define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
/* Use the HUSH parser */
#define CFG_HUSH_PARSER
#ifdef CFG_HUSH_PARSER
#define CFG_PROMPT_HUSH_PS2 "> "
#endif

/* pass open firmware flat tree */
#define CONFIG_OF_LIBFDT	1
#define CONFIG_OF_BOARD_SETUP	1
#define CONFIG_OF_STDOUT_VIA_ALIAS	1

/* I2C */
#define CONFIG_HARD_I2C		/* I2C with hardware support */
#undef CONFIG_SOFT_I2C		/* I2C bit-banged */
#define CONFIG_FSL_I2C
#define CFG_I2C_SPEED	400000	/* I2C speed and slave address */
#define CFG_I2C_SLAVE	0x7F
#define CFG_I2C_NOPROBES	{0x51}	/* Don't probe these addrs */
#define CFG_I2C_OFFSET	0x3000

/*
 * Config on-board RTC
 */
#define CONFIG_RTC_DS1374		/* use ds1374 rtc via i2c */
#define CFG_I2C_RTC_ADDR	0x68	/* at address 0x68 */

/*
 * General PCI
 * Addresses are mapped 1-1.
 */
#define CFG_PCI_MEM_BASE	0x80000000
#define CFG_PCI_MEM_PHYS	CFG_PCI_MEM_BASE
#define CFG_PCI_MEM_SIZE	0x10000000	/* 256M */
#define CFG_PCI_MMIO_BASE	0x90000000
#define CFG_PCI_MMIO_PHYS	CFG_PCI_MMIO_BASE
#define CFG_PCI_MMIO_SIZE	0x10000000	/* 256M */
#define CFG_PCI_IO_BASE		0x00000000
#define CFG_PCI_IO_PHYS		0xE0300000
#define CFG_PCI_IO_SIZE		0x100000	/* 1M */

#define CFG_PCI_SLV_MEM_LOCAL	CFG_SDRAM_BASE
#define CFG_PCI_SLV_MEM_BUS	0x00000000
#define CFG_PCI_SLV_MEM_SIZE	0x80000000


#ifdef CONFIG_PCI

#define CONFIG_NET_MULTI
#define CONFIG_PCI_PNP		/* do pci plug-and-play */

#undef CONFIG_EEPRO100
#undef CONFIG_PCI_SCAN_SHOW	/* show pci devices on startup */
#define CFG_PCI_SUBSYS_VENDORID	0x1957	/* Freescale */

#endif	/* CONFIG_PCI */


#ifndef CONFIG_NET_MULTI
#define CONFIG_NET_MULTI	1
#endif

/*
 * QE UEC ethernet configuration
 */
#define CONFIG_UEC_ETH
#define CONFIG_ETHPRIME		"FSL UEC0"

#define CONFIG_UEC_ETH1		/* ETH3 */

#ifdef CONFIG_UEC_ETH1
#define CFG_UEC1_UCC_NUM	2	/* UCC3 */
#define CFG_UEC1_RX_CLK		QE_CLK9
#define CFG_UEC1_TX_CLK		QE_CLK10
#define CFG_UEC1_ETH_TYPE	FAST_ETH
#define CFG_UEC1_PHY_ADDR	3
#define CFG_UEC1_INTERFACE_MODE	ENET_100_MII
#endif

#define CONFIG_UEC_ETH2		/* ETH4 */

#ifdef CONFIG_UEC_ETH2
#define CFG_UEC2_UCC_NUM	3	/* UCC4 */
#define CFG_UEC2_RX_CLK		QE_CLK7
#define CFG_UEC2_TX_CLK		QE_CLK8
#define CFG_UEC2_ETH_TYPE	FAST_ETH
#define CFG_UEC2_PHY_ADDR	4
#define CFG_UEC2_INTERFACE_MODE	ENET_100_MII
#endif

/*
 * Environment
 */
#ifndef CFG_RAMBOOT
	#define CFG_ENV_IS_IN_FLASH	1
	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
	#define CFG_ENV_SECT_SIZE	0x20000
	#define CFG_ENV_SIZE		0x2000
#else
	#define CFG_NO_FLASH		1	/* Flash is not usable now */
	#define CFG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
	#define CFG_ENV_SIZE		0x2000
#endif

#define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */

/*
 * BOOTP options
 */
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME


/*
 * Command line configuration.
 */
#include <config_cmd_default.h>

#define CONFIG_CMD_PING
#define CONFIG_CMD_I2C
#define CONFIG_CMD_ASKENV

#if defined(CONFIG_PCI)
    #define CONFIG_CMD_PCI
#endif

#if defined(CFG_RAMBOOT)
    #undef CONFIG_CMD_ENV
    #undef CONFIG_CMD_LOADS
#endif


#undef CONFIG_WATCHDOG		/* watchdog disabled */

/*
 * Miscellaneous configurable options
 */
#define CFG_LONGHELP		/* undef to save memory */
#define CFG_LOAD_ADDR		0x2000000	/* default load address */
#define CFG_PROMPT		"=> "	/* Monitor Command Prompt */

#if defined(CONFIG_CMD_KGDB)
	#define CFG_CBSIZE	1024	/* Console I/O Buffer Size */
#else
	#define CFG_CBSIZE	256	/* Console I/O Buffer Size */
#endif

#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
#define CFG_MAXARGS	16		/* max number of command args */
#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
#define CFG_HZ		1000		/* decrementer freq: 1ms ticks */

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 8 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization.
 */
#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */

/*
 * Core HID Setup
 */
#define CFG_HID0_INIT		0x000000000
#define CFG_HID0_FINAL		HID0_ENABLE_MACHINE_CHECK
#define CFG_HID2		HID2_HBE

/*
 * MMU Setup
 */

/* DDR: cache cacheable */
#define CFG_IBAT0L	(CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
#define CFG_IBAT0U	(CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
#define CFG_DBAT0L	CFG_IBAT0L
#define CFG_DBAT0U	CFG_IBAT0U

/* IMMRBAR & PCI IO: cache-inhibit and guarded */
#define CFG_IBAT1L	(CFG_IMMR | BATL_PP_10 | \
			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
#define CFG_IBAT1U	(CFG_IMMR | BATU_BL_4M | BATU_VS | BATU_VP)
#define CFG_DBAT1L	CFG_IBAT1L
#define CFG_DBAT1U	CFG_IBAT1U

/* BCSR: cache-inhibit and guarded */
#define CFG_IBAT2L	(CFG_BCSR | BATL_PP_10 | \
			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
#define CFG_IBAT2U	(CFG_BCSR | BATU_BL_128K | BATU_VS | BATU_VP)
#define CFG_DBAT2L	CFG_IBAT2L
#define CFG_DBAT2U	CFG_IBAT2U

/* FLASH: icache cacheable, but dcache-inhibit and guarded */
#define CFG_IBAT3L	(CFG_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
#define CFG_IBAT3U	(CFG_FLASH_BASE | BATU_BL_32M | BATU_VS | BATU_VP)
#define CFG_DBAT3L	(CFG_FLASH_BASE | BATL_PP_10 | \
			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
#define CFG_DBAT3U	CFG_IBAT3U

#define CFG_IBAT4L	(0)
#define CFG_IBAT4U	(0)
#define CFG_DBAT4L	CFG_IBAT4L
#define CFG_DBAT4U	CFG_IBAT4U

/* Stack in dcache: cacheable, no memory coherence */
#define CFG_IBAT5L	(CFG_INIT_RAM_ADDR | BATL_PP_10)
#define CFG_IBAT5U	(CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
#define CFG_DBAT5L	CFG_IBAT5L
#define CFG_DBAT5U	CFG_IBAT5U

#ifdef CONFIG_PCI
/* PCI MEM space: cacheable */
#define CFG_IBAT6L	(CFG_PCI_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE)
#define CFG_IBAT6U	(CFG_PCI_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
#define CFG_DBAT6L	CFG_IBAT6L
#define CFG_DBAT6U	CFG_IBAT6U
/* PCI MMIO space: cache-inhibit and guarded */
#define CFG_IBAT7L	(CFG_PCI_MMIO_PHYS | BATL_PP_10 | \
			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
#define CFG_IBAT7U	(CFG_PCI_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
#define CFG_DBAT7L	CFG_IBAT7L
#define CFG_DBAT7U	CFG_IBAT7U
#else
#define CFG_IBAT6L	(0)
#define CFG_IBAT6U	(0)
#define CFG_IBAT7L	(0)
#define CFG_IBAT7U	(0)
#define CFG_DBAT6L	CFG_IBAT6L
#define CFG_DBAT6U	CFG_IBAT6U
#define CFG_DBAT7L	CFG_IBAT7L
#define CFG_DBAT7U	CFG_IBAT7U
#endif

/*
 * Internal Definitions
 *
 * Boot Flags
 */
#define BOOTFLAG_COLD	0x01	/* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM	0x02	/* Software reboot */

#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
#endif

/*
 * Environment Configuration
 */

#define CONFIG_ENV_OVERWRITE

#if defined(CONFIG_UEC_ETH)
#define CONFIG_HAS_ETH0
#define CONFIG_ETHADDR	00:04:9f:ef:03:01
#define CONFIG_HAS_ETH1
#define CONFIG_ETH1ADDR	00:04:9f:ef:03:02
#endif

#define CONFIG_BAUDRATE	115200

#define CONFIG_LOADADDR	500000	/* default location for tftp and bootm */

#define CONFIG_BOOTDELAY 6 	/* -1 disables auto-boot */
#undef  CONFIG_BOOTARGS		/* the boot command will set bootargs */

#define CONFIG_EXTRA_ENV_SETTINGS					\
   "netdev=eth0\0"							\
   "consoledev=ttyS0\0"							\
   "ramdiskaddr=1000000\0"						\
   "ramdiskfile=ramfs.83xx\0"						\
   "fdtaddr=400000\0"							\
   "fdtfile=mpc832x_mds.dtb\0"						\
   ""

#define CONFIG_NFSBOOTCOMMAND						\
   "setenv bootargs root=/dev/nfs rw "					\
      "nfsroot=$serverip:$rootpath "					\
      "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off "	\
      "console=$consoledev,$baudrate $othbootargs;"			\
   "tftp $loadaddr $bootfile;"						\
   "tftp $fdtaddr $fdtfile;"						\
   "bootm $loadaddr - $fdtaddr"

#define CONFIG_RAMBOOTCOMMAND						\
   "setenv bootargs root=/dev/ram rw "					\
      "console=$consoledev,$baudrate $othbootargs;"			\
   "tftp $ramdiskaddr $ramdiskfile;"					\
   "tftp $loadaddr $bootfile;"						\
   "tftp $fdtaddr $fdtfile;"						\
   "bootm $loadaddr $ramdiskaddr $fdtaddr"


#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND

#endif	/* __CONFIG_H */
Commit	Line	Data
24c3aca3 DL	1	/*
	2	* Copyright (C) 2006 Freescale Semiconductor, Inc.
	3	*
	4	* This program is free software; you can redistribute it and/or
	5	* modify it under the terms of the GNU General Public License as
	6	* published by the Free Software Foundation; either version 2 of
	7	* the License, or (at your option) any later version.
	8	*
	9	* This program is distributed in the hope that it will be useful,
	10	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	11	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	12	* GNU General Public License for more details.
	13	*
	14	* You should have received a copy of the GNU General Public License
	15	* along with this program; if not, write to the Free Software
	16	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	17	* MA 02111-1307 USA
	18	*/
	19
	20	#ifndef __CONFIG_H
	21	#define __CONFIG_H
	22
24c3aca3 DL	23	/*
	24	* High Level Configuration Options
	25	*/
	26	#define CONFIG_E300 1 /* E300 family */
	27	#define CONFIG_QE 1 /* Has QE */
	28	#define CONFIG_MPC83XX 1 /* MPC83xx family */
	29	#define CONFIG_MPC832X 1 /* MPC832x CPU specific */
	30	#define CONFIG_MPC832XEMDS 1 /* MPC832XEMDS board specific */
14778585 TL	31	#undef CONFIG_PQ_MDS_PIB /* POWERQUICC MDS Platform IO Board */
14778585 TL	32	#undef CONFIG_PQ_MDS_PIB_ATM /* QOC3 ATM card */
24c3aca3 DL	33
	34	/*
	35	* System Clock Setup
	36	*/
	37	#ifdef CONFIG_PCISLAVE
	38	#define CONFIG_83XX_PCICLK 66000000 /* in HZ */
	39	#else
	40	#define CONFIG_83XX_CLKIN 66000000 /* in Hz */
	41	#endif
	42
	43	#ifndef CONFIG_SYS_CLK_FREQ
	44	#define CONFIG_SYS_CLK_FREQ 66000000
	45	#endif
	46
	47	/*
	48	* Hardware Reset Configuration Word
	49	*/
	50	#define CFG_HRCW_LOW (\
	51	HRCWL_LCL_BUS_TO_SCB_CLK_1X1 \|\
	52	HRCWL_DDR_TO_SCB_CLK_2X1 \|\
	53	HRCWL_VCO_1X2 \|\
	54	HRCWL_CSB_TO_CLKIN_2X1 \|\
	55	HRCWL_CORE_TO_CSB_2X1 \|\
	56	HRCWL_CE_PLL_VCO_DIV_2 \|\
	57	HRCWL_CE_PLL_DIV_1X1 \|\
	58	HRCWL_CE_TO_PLL_1X3)
	59
	60	#ifdef CONFIG_PCISLAVE
	61	#define CFG_HRCW_HIGH (\
	62	HRCWH_PCI_AGENT \|\
	63	HRCWH_PCI1_ARBITER_DISABLE \|\
	64	HRCWH_CORE_ENABLE \|\
	65	HRCWH_FROM_0XFFF00100 \|\
	66	HRCWH_BOOTSEQ_DISABLE \|\
	67	HRCWH_SW_WATCHDOG_DISABLE \|\
	68	HRCWH_ROM_LOC_LOCAL_16BIT \|\
	69	HRCWH_BIG_ENDIAN \|\
	70	HRCWH_LALE_NORMAL)
	71	#else
	72	#define CFG_HRCW_HIGH (\
	73	HRCWH_PCI_HOST \|\
	74	HRCWH_PCI1_ARBITER_ENABLE \|\
	75	HRCWH_CORE_ENABLE \|\
	76	HRCWH_FROM_0X00000100 \|\
	77	HRCWH_BOOTSEQ_DISABLE \|\
	78	HRCWH_SW_WATCHDOG_DISABLE \|\
	79	HRCWH_ROM_LOC_LOCAL_16BIT \|\
	80	HRCWH_BIG_ENDIAN \|\
	81	HRCWH_LALE_NORMAL)
	82	#endif
	83
	84	/*
	85	* System IO Config
	86	*/
	87	#define CFG_SICRL 0x00000000
	88
	89	#define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */
14778585	90	#define CONFIG_BOARD_EARLY_INIT_R
24c3aca3 DL	91
	92	/*
	93	* IMMR new address
	94	*/
	95	#define CFG_IMMR 0xE0000000
	96
	97	/*
	98	* DDR Setup
	99	*/
	100	#define CFG_DDR_BASE 0x00000000 /* DDR is system memory */
	101	#define CFG_SDRAM_BASE CFG_DDR_BASE
	102	#define CFG_DDR_SDRAM_BASE CFG_DDR_BASE
	103	#define CFG_DDRCDR 0x73000002 /* DDR II voltage is 1.8V */
	104
	105	#undef CONFIG_SPD_EEPROM
	106	#if defined(CONFIG_SPD_EEPROM)
	107	/* Determine DDR configuration from I2C interface
	108	*/
	109	#define SPD_EEPROM_ADDRESS 0x51 /* DDR SODIMM */
	110	#else
	111	/* Manually set up DDR parameters
	112	*/
	113	#define CFG_DDR_SIZE 128 /* MB */
	114	#define CFG_DDR_CS0_CONFIG 0x80840102
	115	#define CFG_DDR_TIMING_0 0x00220802
	116	#define CFG_DDR_TIMING_1 0x3935d322
	117	#define CFG_DDR_TIMING_2 0x0f9048ca
	118	#define CFG_DDR_TIMING_3 0x00000000
	119	#define CFG_DDR_CLK_CNTL 0x02000000
	120	#define CFG_DDR_MODE 0x44400232
	121	#define CFG_DDR_MODE2 0x8000c000
	122	#define CFG_DDR_INTERVAL 0x03200064
	123	#define CFG_DDR_CS0_BNDS 0x00000007
	124	#define CFG_DDR_SDRAM_CFG 0x43080000
	125	#define CFG_DDR_SDRAM_CFG2 0x00401000
	126	#endif
	127
	128	/*
	129	* Memory test
	130	*/
	131	#undef CFG_DRAM_TEST /* memory test, takes time */
	132	#define CFG_MEMTEST_START 0x00000000 /* memtest region */
	133	#define CFG_MEMTEST_END 0x00100000
	134
	135	/*
	136	* The reserved memory
	137	*/
	138	#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
	139
	140	#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
	141	#define CFG_RAMBOOT
	142	#else
	143	#undef CFG_RAMBOOT
	144	#endif
	145
b2893e1f	146	/* CFG_MONITOR_LEN must be a multiple of CFG_ENV_SECT_SIZE */
24c3aca3 DL	147	#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
	148	#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
	149
	150	/*
	151	* Initial RAM Base Address Setup
	152	*/
	153	#define CFG_INIT_RAM_LOCK 1
	154	#define CFG_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */
	155	#define CFG_INIT_RAM_END 0x1000 /* End of used area in RAM */
	156	#define CFG_GBL_DATA_SIZE 0x100 /* num bytes initial data */
	157	#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
	158
	159	/*
	160	* Local Bus Configuration & Clock Setup
	161	*/
	162	#define CFG_LCRR (LCRR_DBYP \| LCRR_CLKDIV_2)
	163	#define CFG_LBC_LBCR 0x00000000
	164
	165	/*
	166	* FLASH on the Local Bus
	167	*/
	168	#define CFG_FLASH_CFI /* use the Common Flash Interface */
	169	#define CFG_FLASH_CFI_DRIVER /* use the CFI driver */
	170	#define CFG_FLASH_BASE 0xFE000000 /* FLASH base address */
	171	#define CFG_FLASH_SIZE 16 /* FLASH size is 16M */
	172
	173	#define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE /* Window base at flash base */
	174	#define CFG_LBLAWAR0_PRELIM 0x80000018 /* 32MB window size */
	175
	176	#define CFG_BR0_PRELIM (CFG_FLASH_BASE \| /* Flash Base address */ \
	177	(2 << BR_PS_SHIFT) \| /* 16 bit port size */ \
	178	BR_V) /* valid */
	179	#define CFG_OR0_PRELIM 0xfe006ff7 /* 16MB Flash size */
	180
	181	#define CFG_MAX_FLASH_BANKS 1 /* number of banks */
	182	#define CFG_MAX_FLASH_SECT 128 /* sectors per device */
	183
	184	#undef CFG_FLASH_CHECKSUM
	185
	186	/*
	187	* BCSR on the Local Bus
	188	*/
	189	#define CFG_BCSR 0xF8000000
	190	#define CFG_LBLAWBAR1_PRELIM CFG_BCSR /* Access window base at BCSR base */
	191	#define CFG_LBLAWAR1_PRELIM 0x8000000E /* Access window size 32K */
	192
	193	#define CFG_BR1_PRELIM (CFG_BCSR\|0x00000801) /* Port size=8bit, MSEL=GPCM */
	194	#define CFG_OR1_PRELIM 0xFFFFE9f7 /* length 32K */
	195
	196	/*
	197	* SDRAM on the Local Bus
	198	*/
	199	#undef CFG_LB_SDRAM /* The board has not SRDAM on local bus */
	200
	201	#ifdef CFG_LB_SDRAM
	202	#define CFG_LBC_SDRAM_BASE 0xF0000000 /* SDRAM base address */
	203	#define CFG_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */
	204
	205	#define CFG_LBLAWBAR2_PRELIM CFG_LBC_SDRAM_BASE
	206	#define CFG_LBLAWAR2_PRELIM 0x80000019 /* 64MB */
	207
	208	/local bus BR2, OR2 definition for SDRAM if soldered on the EPB board /
	209	/*
	210	* Base Register 2 and Option Register 2 configure SDRAM.
211	* The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000.
212	*
213	* For BR2, need:
214	* Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
215	* port size = 32-bits = BR2[19:20] = 11
216	* no parity checking = BR2[21:22] = 00
217	* SDRAM for MSEL = BR2[24:26] = 011
218	* Valid = BR[31] = 1
219	*
220	* 0 4 8 12 16 20 24 28
221	* 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861
222	*
223	* CFG_LBC_SDRAM_BASE should be masked and OR'ed into
224	* the top 17 bits of BR2.
225	*/
226
227	#define CFG_BR2_PRELIM 0xf0001861 /Port size=32bit, MSEL=SDRAM /
228
229	/*
230	* The SDRAM size in MB, CFG_LBC_SDRAM_SIZE, is 64.
231	*
232	* For OR2, need:
233	* 64MB mask for AM, OR2[0:7] = 1111 1100
234	* XAM, OR2[17:18] = 11
235	* 9 columns OR2[19-21] = 010
236	* 13 rows OR2[23-25] = 100
237	* EAD set for extra time OR[31] = 1
238	*
239	* 0 4 8 12 16 20 24 28
240	* 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901
241	*/
242
243	#define CFG_OR2_PRELIM 0xfc006901
244
245	#define CFG_LBC_LSRT 0x32000000 /* LB sdram refresh timer, about 6us */
246	#define CFG_LBC_MRTPR 0x20000000 /* LB refresh timer prescal, 266MHz/32 */
247
248	/*
249	* LSDMR masks
250	*/
251	#define CFG_LBC_LSDMR_OP_NORMAL (0 << (31 - 4))
252	#define CFG_LBC_LSDMR_OP_ARFRSH (1 << (31 - 4))
253	#define CFG_LBC_LSDMR_OP_SRFRSH (2 << (31 - 4))
254	#define CFG_LBC_LSDMR_OP_MRW (3 << (31 - 4))
255	#define CFG_LBC_LSDMR_OP_PRECH (4 << (31 - 4))
256	#define CFG_LBC_LSDMR_OP_PCHALL (5 << (31 - 4))
257	#define CFG_LBC_LSDMR_OP_ACTBNK (6 << (31 - 4))
258	#define CFG_LBC_LSDMR_OP_RWINV (7 << (31 - 4))
259
260	#define CFG_LBC_LSDMR_COMMON 0x0063b723
261
262	/*
263	* SDRAM Controller configuration sequence.
264	*/
265	#define CFG_LBC_LSDMR_1 ( CFG_LBC_LSDMR_COMMON \
266	\| CFG_LBC_LSDMR_OP_PCHALL)
267	#define CFG_LBC_LSDMR_2 ( CFG_LBC_LSDMR_COMMON \
268	\| CFG_LBC_LSDMR_OP_ARFRSH)
269	#define CFG_LBC_LSDMR_3 ( CFG_LBC_LSDMR_COMMON \
270	\| CFG_LBC_LSDMR_OP_ARFRSH)
271	#define CFG_LBC_LSDMR_4 ( CFG_LBC_LSDMR_COMMON \
272	\| CFG_LBC_LSDMR_OP_MRW)
273	#define CFG_LBC_LSDMR_5 ( CFG_LBC_LSDMR_COMMON \
274	\| CFG_LBC_LSDMR_OP_NORMAL)
275
276	#endif
277
278	/*
279	* Windows to access PIB via local bus
280	*/
281	#define CFG_LBLAWBAR3_PRELIM 0xf8008000 /* windows base 0xf8008000 */
282	#define CFG_LBLAWAR3_PRELIM 0x8000000f /* windows size 64KB */
283
284	/*
285	* CS2 on Local Bus, to PIB
286	*/
287	#define CFG_BR2_PRELIM 0xf8008801 /* CS2 base address at 0xf8008000 */
288	#define CFG_OR2_PRELIM 0xffffe9f7 /* size 32KB, port size 8bit, GPCM */
289
290	/*
291	* CS3 on Local Bus, to PIB
292	*/
293	#define CFG_BR3_PRELIM 0xf8010801 /* CS3 base address at 0xf8010000 */
294	#define CFG_OR3_PRELIM 0xffffe9f7 /* size 32KB, port size 8bit, GPCM */
295
296	/*
297	* Serial Port
298	*/
299	#define CONFIG_CONS_INDEX 1
300	#undef CONFIG_SERIAL_SOFTWARE_FIFO
301	#define CFG_NS16550
302	#define CFG_NS16550_SERIAL
303	#define CFG_NS16550_REG_SIZE 1
304	#define CFG_NS16550_CLK get_bus_freq(0)
305
306	#define CFG_BAUDRATE_TABLE \
307	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
308
309	#define CFG_NS16550_COM1 (CFG_IMMR+0x4500)
310	#define CFG_NS16550_COM2 (CFG_IMMR+0x4600)
311
22d71a71	312	#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
24c3aca3 DL	313	/* Use the HUSH parser */
	314	#define CFG_HUSH_PARSER
	315	#ifdef CFG_HUSH_PARSER
	316	#define CFG_PROMPT_HUSH_PS2 "> "
	317	#endif
	318
	319	/* pass open firmware flat tree */
35cc4e48	320	#define CONFIG_OF_LIBFDT 1
24c3aca3	321	#define CONFIG_OF_BOARD_SETUP 1
5b8bc606	322	#define CONFIG_OF_STDOUT_VIA_ALIAS 1
24c3aca3 DL	323
	324	/* I2C */
	325	#define CONFIG_HARD_I2C /* I2C with hardware support */
	326	#undef CONFIG_SOFT_I2C /* I2C bit-banged */
	327	#define CONFIG_FSL_I2C
	328	#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
	329	#define CFG_I2C_SLAVE 0x7F
	330	#define CFG_I2C_NOPROBES {0x51} /* Don't probe these addrs */
	331	#define CFG_I2C_OFFSET 0x3000
	332
	333	/*
	334	* Config on-board RTC
	335	*/
	336	#define CONFIG_RTC_DS1374 /* use ds1374 rtc via i2c */
	337	#define CFG_I2C_RTC_ADDR 0x68 /* at address 0x68 */
	338
	339	/*
	340	* General PCI
	341	* Addresses are mapped 1-1.
	342	*/
	343	#define CFG_PCI_MEM_BASE 0x80000000
	344	#define CFG_PCI_MEM_PHYS CFG_PCI_MEM_BASE
	345	#define CFG_PCI_MEM_SIZE 0x10000000 /* 256M */
	346	#define CFG_PCI_MMIO_BASE 0x90000000
	347	#define CFG_PCI_MMIO_PHYS CFG_PCI_MMIO_BASE
	348	#define CFG_PCI_MMIO_SIZE 0x10000000 /* 256M */
a7ba32d4	349	#define CFG_PCI_IO_BASE 0x00000000
24c3aca3 DL	350	#define CFG_PCI_IO_PHYS 0xE0300000
	351	#define CFG_PCI_IO_SIZE 0x100000 /* 1M */
	352
	353	#define CFG_PCI_SLV_MEM_LOCAL CFG_SDRAM_BASE
	354	#define CFG_PCI_SLV_MEM_BUS 0x00000000
	355	#define CFG_PCI_SLV_MEM_SIZE 0x80000000
	356
	357
	358	#ifdef CONFIG_PCI
	359
	360	#define CONFIG_NET_MULTI
	361	#define CONFIG_PCI_PNP /* do pci plug-and-play */
	362
	363	#undef CONFIG_EEPRO100
	364	#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
	365	#define CFG_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */
	366
	367	#endif /* CONFIG_PCI */
	368
	369
	370	#ifndef CONFIG_NET_MULTI
	371	#define CONFIG_NET_MULTI 1
	372	#endif
	373
	374	/*
	375	* QE UEC ethernet configuration
	376	*/
	377	#define CONFIG_UEC_ETH
711a7946	378	#define CONFIG_ETHPRIME "FSL UEC0"
24c3aca3 DL	379
	380	#define CONFIG_UEC_ETH1 /* ETH3 */
	381
	382	#ifdef CONFIG_UEC_ETH1
	383	#define CFG_UEC1_UCC_NUM 2 /* UCC3 */
	384	#define CFG_UEC1_RX_CLK QE_CLK9
	385	#define CFG_UEC1_TX_CLK QE_CLK10
	386	#define CFG_UEC1_ETH_TYPE FAST_ETH
	387	#define CFG_UEC1_PHY_ADDR 3
	388	#define CFG_UEC1_INTERFACE_MODE ENET_100_MII
	389	#endif
	390
	391	#define CONFIG_UEC_ETH2 /* ETH4 */
	392
	393	#ifdef CONFIG_UEC_ETH2
	394	#define CFG_UEC2_UCC_NUM 3 /* UCC4 */
	395	#define CFG_UEC2_RX_CLK QE_CLK7
	396	#define CFG_UEC2_TX_CLK QE_CLK8
	397	#define CFG_UEC2_ETH_TYPE FAST_ETH
	398	#define CFG_UEC2_PHY_ADDR 4
	399	#define CFG_UEC2_INTERFACE_MODE ENET_100_MII
	400	#endif
	401
	402	/*
	403	* Environment
	404	*/
	405	#ifndef CFG_RAMBOOT
	406	#define CFG_ENV_IS_IN_FLASH 1
b2893e1f TT	407	#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
b2893e1f TT	408	#define CFG_ENV_SECT_SIZE 0x20000
24c3aca3 DL	409	#define CFG_ENV_SIZE 0x2000
	410	#else
	411	#define CFG_NO_FLASH 1 /* Flash is not usable now */
	412	#define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */
	413	#define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000)
	414	#define CFG_ENV_SIZE 0x2000
	415	#endif
	416
	417	#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
	418	#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
	419
079a136c JL	420	/*
	421	* BOOTP options
	422	*/
	423	#define CONFIG_BOOTP_BOOTFILESIZE
	424	#define CONFIG_BOOTP_BOOTPATH
	425	#define CONFIG_BOOTP_GATEWAY
	426	#define CONFIG_BOOTP_HOSTNAME
	427
	428
8ea5499a JL	429	/*
	430	* Command line configuration.
	431	*/
	432	#include <config_cmd_default.h>
	433
	434	#define CONFIG_CMD_PING
	435	#define CONFIG_CMD_I2C
	436	#define CONFIG_CMD_ASKENV
	437
24c3aca3	438	#if defined(CONFIG_PCI)
8ea5499a	439	#define CONFIG_CMD_PCI
24c3aca3	440	#endif
8ea5499a JL	441
	442	#if defined(CFG_RAMBOOT)
	443	#undef CONFIG_CMD_ENV
	444	#undef CONFIG_CMD_LOADS
24c3aca3 DL	445	#endif
24c3aca3 DL	446
24c3aca3 DL	447
	448	#undef CONFIG_WATCHDOG /* watchdog disabled */
	449
	450	/*
	451	* Miscellaneous configurable options
	452	*/
	453	#define CFG_LONGHELP /* undef to save memory */
	454	#define CFG_LOAD_ADDR 0x2000000 /* default load address */
	455	#define CFG_PROMPT "=> " /* Monitor Command Prompt */
	456
8ea5499a	457	#if defined(CONFIG_CMD_KGDB)
24c3aca3 DL	458	#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
	459	#else
	460	#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
	461	#endif
	462
	463	#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
	464	#define CFG_MAXARGS 16 /* max number of command args */
	465	#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
	466	#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */
	467
	468	/*
	469	* For booting Linux, the board info and command line data
	470	* have to be in the first 8 MB of memory, since this is
	471	* the maximum mapped by the Linux kernel during initialization.
	472	*/
	473	#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
	474
	475	/*
	476	* Core HID Setup
	477	*/
	478	#define CFG_HID0_INIT 0x000000000
	479	#define CFG_HID0_FINAL HID0_ENABLE_MACHINE_CHECK
	480	#define CFG_HID2 HID2_HBE
	481
24c3aca3 DL	482	/*
	483	* MMU Setup
	484	*/
	485
	486	/* DDR: cache cacheable */
	487	#define CFG_IBAT0L (CFG_SDRAM_BASE \| BATL_PP_10 \| BATL_MEMCOHERENCE)
	488	#define CFG_IBAT0U (CFG_SDRAM_BASE \| BATU_BL_256M \| BATU_VS \| BATU_VP)
	489	#define CFG_DBAT0L CFG_IBAT0L
	490	#define CFG_DBAT0U CFG_IBAT0U
	491
	492	/* IMMRBAR & PCI IO: cache-inhibit and guarded */
	493	#define CFG_IBAT1L (CFG_IMMR \| BATL_PP_10 \| \
	494	BATL_CACHEINHIBIT \| BATL_GUARDEDSTORAGE)
	495	#define CFG_IBAT1U (CFG_IMMR \| BATU_BL_4M \| BATU_VS \| BATU_VP)
	496	#define CFG_DBAT1L CFG_IBAT1L
	497	#define CFG_DBAT1U CFG_IBAT1U
	498
	499	/* BCSR: cache-inhibit and guarded */
	500	#define CFG_IBAT2L (CFG_BCSR \| BATL_PP_10 \| \
	501	BATL_CACHEINHIBIT \| BATL_GUARDEDSTORAGE)
	502	#define CFG_IBAT2U (CFG_BCSR \| BATU_BL_128K \| BATU_VS \| BATU_VP)
	503	#define CFG_DBAT2L CFG_IBAT2L
	504	#define CFG_DBAT2U CFG_IBAT2U
	505
	506	/* FLASH: icache cacheable, but dcache-inhibit and guarded */
	507	#define CFG_IBAT3L (CFG_FLASH_BASE \| BATL_PP_10 \| BATL_MEMCOHERENCE)
	508	#define CFG_IBAT3U (CFG_FLASH_BASE \| BATU_BL_32M \| BATU_VS \| BATU_VP)
	509	#define CFG_DBAT3L (CFG_FLASH_BASE \| BATL_PP_10 \| \
	510	BATL_CACHEINHIBIT \| BATL_GUARDEDSTORAGE)
	511	#define CFG_DBAT3U CFG_IBAT3U
	512
	513	#define CFG_IBAT4L (0)
	514	#define CFG_IBAT4U (0)
	515	#define CFG_DBAT4L CFG_IBAT4L
	516	#define CFG_DBAT4U CFG_IBAT4U
	517
	518	/* Stack in dcache: cacheable, no memory coherence */
	519	#define CFG_IBAT5L (CFG_INIT_RAM_ADDR \| BATL_PP_10)
	520	#define CFG_IBAT5U (CFG_INIT_RAM_ADDR \| BATU_BL_128K \| BATU_VS \| BATU_VP)
	521	#define CFG_DBAT5L CFG_IBAT5L
	522	#define CFG_DBAT5U CFG_IBAT5U
	523
	524	#ifdef CONFIG_PCI
	525	/* PCI MEM space: cacheable */
	526	#define CFG_IBAT6L (CFG_PCI_MEM_PHYS \| BATL_PP_10 \| BATL_MEMCOHERENCE)
	527	#define CFG_IBAT6U (CFG_PCI_MEM_PHYS \| BATU_BL_256M \| BATU_VS \| BATU_VP)
	528	#define CFG_DBAT6L CFG_IBAT6L
	529	#define CFG_DBAT6U CFG_IBAT6U
	530	/* PCI MMIO space: cache-inhibit and guarded */
	531	#define CFG_IBAT7L (CFG_PCI_MMIO_PHYS \| BATL_PP_10 \| \
	532	BATL_CACHEINHIBIT \| BATL_GUARDEDSTORAGE)
	533	#define CFG_IBAT7U (CFG_PCI_MMIO_PHYS \| BATU_BL_256M \| BATU_VS \| BATU_VP)
	534	#define CFG_DBAT7L CFG_IBAT7L
	535	#define CFG_DBAT7U CFG_IBAT7U
	536	#else
	537	#define CFG_IBAT6L (0)
	538	#define CFG_IBAT6U (0)
	539	#define CFG_IBAT7L (0)
	540	#define CFG_IBAT7U (0)
	541	#define CFG_DBAT6L CFG_IBAT6L
	542	#define CFG_DBAT6U CFG_IBAT6U
	543	#define CFG_DBAT7L CFG_IBAT7L
	544	#define CFG_DBAT7U CFG_IBAT7U
	545	#endif
546
547	/*
548	* Internal Definitions
549	*
550	* Boot Flags
551	*/
552	#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
553	#define BOOTFLAG_WARM 0x02 /* Software reboot */
554
8ea5499a	555	#if defined(CONFIG_CMD_KGDB)
24c3aca3 DL	556	#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */
	557	#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
	558	#endif
	559
	560	/*
	561	* Environment Configuration
	562	*/
	563
	564	#define CONFIG_ENV_OVERWRITE
	565
	566	#if defined(CONFIG_UEC_ETH)
977b5758	567	#define CONFIG_HAS_ETH0
24c3aca3 DL	568	#define CONFIG_ETHADDR 00:04:9f:ef:03:01
	569	#define CONFIG_HAS_ETH1
	570	#define CONFIG_ETH1ADDR 00:04:9f:ef:03:02
	571	#endif
	572
	573	#define CONFIG_BAUDRATE 115200
	574
b2115757	575	#define CONFIG_LOADADDR 500000 /* default location for tftp and bootm */
24c3aca3 DL	576
	577	#define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */
	578	#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
	579
	580	#define CONFIG_EXTRA_ENV_SETTINGS \
	581	"netdev=eth0\0" \
	582	"consoledev=ttyS0\0" \
	583	"ramdiskaddr=1000000\0" \
	584	"ramdiskfile=ramfs.83xx\0" \
	585	"fdtaddr=400000\0" \
270fe261	586	"fdtfile=mpc832x_mds.dtb\0" \
24c3aca3 DL	587	""
	588
	589	#define CONFIG_NFSBOOTCOMMAND \
	590	"setenv bootargs root=/dev/nfs rw " \
	591	"nfsroot=$serverip:$rootpath " \
	592	"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
	593	"console=$consoledev,$baudrate $othbootargs;" \
	594	"tftp $loadaddr $bootfile;" \
	595	"tftp $fdtaddr $fdtfile;" \
	596	"bootm $loadaddr - $fdtaddr"
	597
	598	#define CONFIG_RAMBOOTCOMMAND \
	599	"setenv bootargs root=/dev/ram rw " \
	600	"console=$consoledev,$baudrate $othbootargs;" \
	601	"tftp $ramdiskaddr $ramdiskfile;" \
	602	"tftp $loadaddr $bootfile;" \
	603	"tftp $fdtaddr $fdtfile;" \
	604	"bootm $loadaddr $ramdiskaddr $fdtaddr"
	605
	606
	607	#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
	608
	609	#endif /* __CONFIG_H */