]> git.ipfire.org Git - people/ms/u-boot.git/blame - include/configs/MPC8349EMDS.h
cleanup use of CFG_ENV_IS_IN_FLASH
[people/ms/u-boot.git] / include / configs / MPC8349EMDS.h
CommitLineData
991425fe
MB
1/*
2 * (C) Copyright 2006
3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 */
23
24/*
25 * mpc8349emds board configuration file
26 *
27 */
28
29#ifndef __CONFIG_H
30#define __CONFIG_H
31
991425fe
MB
32/*
33 * High Level Configuration Options
34 */
35#define CONFIG_E300 1 /* E300 Family */
bf0b542d 36#define CONFIG_MPC83XX 1 /* MPC83XX family */
b24f119d 37#define CONFIG_MPC834X 1 /* MPC834X family */
991425fe
MB
38#define CONFIG_MPC8349 1 /* MPC8349 specific */
39#define CONFIG_MPC8349EMDS 1 /* MPC8349EMDS board specific */
40
977b50f8 41#undef CONFIG_PCI
53677ef1 42#undef CONFIG_MPC83XX_PCI2 /* support for 2nd PCI controller */
991425fe
MB
43
44#define PCI_66M
45#ifdef PCI_66M
46#define CONFIG_83XX_CLKIN 66000000 /* in Hz */
47#else
48#define CONFIG_83XX_CLKIN 33000000 /* in Hz */
49#endif
50
447ad576
IS
51#ifdef CONFIG_PCISLAVE
52#define CONFIG_PCI
53#define CONFIG_83XX_PCICLK 66666666 /* in Hz */
54#endif /* CONFIG_PCISLAVE */
55
991425fe
MB
56#ifndef CONFIG_SYS_CLK_FREQ
57#ifdef PCI_66M
58#define CONFIG_SYS_CLK_FREQ 66000000
8fe9bf61 59#define HRCWL_CSB_TO_CLKIN HRCWL_CSB_TO_CLKIN_4X1
991425fe
MB
60#else
61#define CONFIG_SYS_CLK_FREQ 33000000
8fe9bf61 62#define HRCWL_CSB_TO_CLKIN HRCWL_CSB_TO_CLKIN_8X1
991425fe
MB
63#endif
64#endif
65
66#define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */
67
d239d74b 68#define CFG_IMMR 0xE0000000
991425fe
MB
69
70#undef CFG_DRAM_TEST /* memory test, takes time */
71#define CFG_MEMTEST_START 0x00000000 /* memtest region */
72#define CFG_MEMTEST_END 0x00100000
73
74/*
75 * DDR Setup
76 */
8d172c0f 77#define CONFIG_DDR_ECC /* support DDR ECC function */
d326f4a2 78#define CONFIG_DDR_ECC_CMD /* use DDR ECC user commands */
991425fe
MB
79#define CONFIG_SPD_EEPROM /* use SPD EEPROM for DDR setup*/
80
dc9e499c
RJ
81/*
82 * 32-bit data path mode.
cf48eb9a 83 *
dc9e499c
RJ
84 * Please note that using this mode for devices with the real density of 64-bit
85 * effectively reduces the amount of available memory due to the effect of
86 * wrapping around while translating address to row/columns, for example in the
87 * 256MB module the upper 128MB get aliased with contents of the lower
88 * 128MB); normally this define should be used for devices with real 32-bit
cf48eb9a 89 * data path.
dc9e499c
RJ
90 */
91#undef CONFIG_DDR_32BIT
92
991425fe
MB
93#define CFG_DDR_BASE 0x00000000 /* DDR is system memory*/
94#define CFG_SDRAM_BASE CFG_DDR_BASE
95#define CFG_DDR_SDRAM_BASE CFG_DDR_BASE
8d172c0f
XX
96#define CFG_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN | \
97 DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05)
991425fe
MB
98#undef CONFIG_DDR_2T_TIMING
99
8d172c0f
XX
100/*
101 * DDRCDR - DDR Control Driver Register
102 */
103#define CFG_DDRCDR_VALUE 0x80080001
104
991425fe 105#if defined(CONFIG_SPD_EEPROM)
dc9e499c
RJ
106/*
107 * Determine DDR configuration from I2C interface.
108 */
109#define SPD_EEPROM_ADDRESS 0x51 /* DDR DIMM */
991425fe 110#else
dc9e499c
RJ
111/*
112 * Manually set up DDR parameters
113 */
114#define CFG_DDR_SIZE 256 /* MB */
8d172c0f
XX
115#if defined(CONFIG_DDR_II)
116#define CFG_DDRCDR 0x80080001
117#define CFG_DDR_CS2_BNDS 0x0000000f
118#define CFG_DDR_CS2_CONFIG 0x80330102
119#define CFG_DDR_TIMING_0 0x00220802
120#define CFG_DDR_TIMING_1 0x38357322
121#define CFG_DDR_TIMING_2 0x2f9048c8
122#define CFG_DDR_TIMING_3 0x00000000
123#define CFG_DDR_CLK_CNTL 0x02000000
124#define CFG_DDR_MODE 0x47d00432
125#define CFG_DDR_MODE2 0x8000c000
126#define CFG_DDR_INTERVAL 0x03cf0080
127#define CFG_DDR_SDRAM_CFG 0x43000000
128#define CFG_DDR_SDRAM_CFG2 0x00401000
129#else
dc9e499c
RJ
130#define CFG_DDR_CONFIG (CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10)
131#define CFG_DDR_TIMING_1 0x36332321
132#define CFG_DDR_TIMING_2 0x00000800 /* P9-45,may need tuning */
133#define CFG_DDR_CONTROL 0xc2000000 /* unbuffered,no DYN_PWR */
134#define CFG_DDR_INTERVAL 0x04060100 /* autocharge,no open page */
135
136#if defined(CONFIG_DDR_32BIT)
137/* set burst length to 8 for 32-bit data path */
138#define CFG_DDR_MODE 0x00000023 /* DLL,normal,seq,4/2.5, 8 burst len */
139#else
140/* the default burst length is 4 - for 64-bit data path */
141#define CFG_DDR_MODE 0x00000022 /* DLL,normal,seq,4/2.5, 4 burst len */
142#endif
991425fe 143#endif
8d172c0f 144#endif
991425fe
MB
145
146/*
147 * SDRAM on the Local Bus
148 */
149#define CFG_LBC_SDRAM_BASE 0xF0000000 /* Localbus SDRAM */
150#define CFG_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */
151
152/*
153 * FLASH on the Local Bus
154 */
155#define CFG_FLASH_CFI /* use the Common Flash Interface */
00b1883a 156#define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */
991425fe 157#define CFG_FLASH_BASE 0xFE000000 /* start of FLASH */
8d172c0f 158#define CFG_FLASH_SIZE 32 /* max flash size in MB */
991425fe
MB
159/* #define CFG_FLASH_USE_BUFFER_WRITE */
160
161#define CFG_BR0_PRELIM (CFG_FLASH_BASE | /* flash Base address */ \
8d172c0f 162 (2 << BR_PS_SHIFT) | /* 16 bit port size */ \
991425fe 163 BR_V) /* valid */
8d172c0f 164#define CFG_OR0_PRELIM ((~(CFG_FLASH_SIZE - 1) << 20) | OR_UPM_XAM | \
f9023afb 165 OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_XACS | OR_GPCM_SCY_15 | \
8d172c0f 166 OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD)
991425fe 167#define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE /* window base at flash base */
8d172c0f 168#define CFG_LBLAWAR0_PRELIM 0x80000018 /* 32 MB window size */
991425fe
MB
169
170#define CFG_MAX_FLASH_BANKS 1 /* number of banks */
8d172c0f 171#define CFG_MAX_FLASH_SECT 256 /* max sectors per device */
991425fe
MB
172
173#undef CFG_FLASH_CHECKSUM
174#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
175#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
176
177#define CFG_MID_FLASH_JUMP 0x7F000000
178#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
179
180#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
181#define CFG_RAMBOOT
182#else
183#undef CFG_RAMBOOT
184#endif
185
186/*
187 * BCSR register on local bus 32KB, 8-bit wide for MDS config reg
188 */
8fe9bf61 189#define CFG_BCSR 0xE2400000
991425fe
MB
190#define CFG_LBLAWBAR1_PRELIM CFG_BCSR /* Access window base at BCSR base */
191#define CFG_LBLAWAR1_PRELIM 0x8000000E /* Access window size 32K */
192#define CFG_BR1_PRELIM (CFG_BCSR|0x00000801) /* Port-size=8bit, MSEL=GPCM */
193#define CFG_OR1_PRELIM 0xFFFFE8F0 /* length 32K */
194
195#define CONFIG_L1_INIT_RAM
196#define CFG_INIT_RAM_LOCK 1
8fe9bf61 197#define CFG_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */
991425fe
MB
198#define CFG_INIT_RAM_END 0x1000 /* End of used area in RAM*/
199
200#define CFG_GBL_DATA_SIZE 0x100 /* num bytes initial data */
201#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
202#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
203
204#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
205#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
206
207/*
208 * Local Bus LCRR and LBCR regs
209 * LCRR: DLL bypass, Clock divider is 4
210 * External Local Bus rate is
211 * CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV
212 */
213#define CFG_LCRR (LCRR_DBYP | LCRR_CLKDIV_4)
214#define CFG_LBC_LBCR 0x00000000
215
8d172c0f
XX
216/*
217 * The MPC834xEA MDS for 834xE rev3.1 may not be assembled SDRAM memory.
218 * if board has SRDAM on local bus, you can define CFG_LB_SDRAM
219 */
220#undef CFG_LB_SDRAM
991425fe
MB
221
222#ifdef CFG_LB_SDRAM
223/* Local bus BR2, OR2 definition for SDRAM if soldered on the MDS board */
224/*
225 * Base Register 2 and Option Register 2 configure SDRAM.
226 * The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000.
227 *
228 * For BR2, need:
229 * Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
230 * port-size = 32-bits = BR2[19:20] = 11
231 * no parity checking = BR2[21:22] = 00
232 * SDRAM for MSEL = BR2[24:26] = 011
233 * Valid = BR[31] = 1
234 *
235 * 0 4 8 12 16 20 24 28
236 * 1111 0000 0000 0000 0001 1000 0110 0001 = F0001861
237 *
238 * FIXME: CFG_LBC_SDRAM_BASE should be masked and OR'ed into
239 * FIXME: the top 17 bits of BR2.
240 */
241
242#define CFG_BR2_PRELIM 0xF0001861 /* Port-size=32bit, MSEL=SDRAM */
243#define CFG_LBLAWBAR2_PRELIM 0xF0000000
244#define CFG_LBLAWAR2_PRELIM 0x80000019 /* 64M */
245
246/*
247 * The SDRAM size in MB, CFG_LBC_SDRAM_SIZE, is 64.
248 *
249 * For OR2, need:
250 * 64MB mask for AM, OR2[0:7] = 1111 1100
251 * XAM, OR2[17:18] = 11
252 * 9 columns OR2[19-21] = 010
253 * 13 rows OR2[23-25] = 100
254 * EAD set for extra time OR[31] = 1
255 *
256 * 0 4 8 12 16 20 24 28
257 * 1111 1100 0000 0000 0110 1001 0000 0001 = FC006901
258 */
259
260#define CFG_OR2_PRELIM 0xFC006901
261
262#define CFG_LBC_LSRT 0x32000000 /* LB sdram refresh timer, about 6us */
263#define CFG_LBC_MRTPR 0x20000000 /* LB refresh timer prescal, 266MHz/32 */
264
265/*
266 * LSDMR masks
267 */
268#define CFG_LBC_LSDMR_RFEN (1 << (31 - 1))
269#define CFG_LBC_LSDMR_BSMA1516 (3 << (31 - 10))
270#define CFG_LBC_LSDMR_BSMA1617 (4 << (31 - 10))
271#define CFG_LBC_LSDMR_RFCR5 (3 << (31 - 16))
272#define CFG_LBC_LSDMR_RFCR8 (5 << (31 - 16))
273#define CFG_LBC_LSDMR_RFCR16 (7 << (31 - 16))
274#define CFG_LBC_LSDMR_PRETOACT3 (3 << (31 - 19))
275#define CFG_LBC_LSDMR_PRETOACT6 (5 << (31 - 19))
276#define CFG_LBC_LSDMR_PRETOACT7 (7 << (31 - 19))
277#define CFG_LBC_LSDMR_ACTTORW3 (3 << (31 - 22))
278#define CFG_LBC_LSDMR_ACTTORW7 (7 << (31 - 22))
279#define CFG_LBC_LSDMR_ACTTORW6 (6 << (31 - 22))
280#define CFG_LBC_LSDMR_BL8 (1 << (31 - 23))
281#define CFG_LBC_LSDMR_WRC2 (2 << (31 - 27))
282#define CFG_LBC_LSDMR_WRC3 (3 << (31 - 27))
283#define CFG_LBC_LSDMR_WRC4 (0 << (31 - 27))
284#define CFG_LBC_LSDMR_BUFCMD (1 << (31 - 29))
285#define CFG_LBC_LSDMR_CL3 (3 << (31 - 31))
286
287#define CFG_LBC_LSDMR_OP_NORMAL (0 << (31 - 4))
288#define CFG_LBC_LSDMR_OP_ARFRSH (1 << (31 - 4))
289#define CFG_LBC_LSDMR_OP_SRFRSH (2 << (31 - 4))
290#define CFG_LBC_LSDMR_OP_MRW (3 << (31 - 4))
291#define CFG_LBC_LSDMR_OP_PRECH (4 << (31 - 4))
292#define CFG_LBC_LSDMR_OP_PCHALL (5 << (31 - 4))
293#define CFG_LBC_LSDMR_OP_ACTBNK (6 << (31 - 4))
294#define CFG_LBC_LSDMR_OP_RWINV (7 << (31 - 4))
295
296#define CFG_LBC_LSDMR_COMMON ( CFG_LBC_LSDMR_RFEN \
297 | CFG_LBC_LSDMR_BSMA1516 \
298 | CFG_LBC_LSDMR_RFCR8 \
299 | CFG_LBC_LSDMR_PRETOACT6 \
300 | CFG_LBC_LSDMR_ACTTORW3 \
301 | CFG_LBC_LSDMR_BL8 \
302 | CFG_LBC_LSDMR_WRC3 \
303 | CFG_LBC_LSDMR_CL3 \
304 )
305
306/*
307 * SDRAM Controller configuration sequence.
308 */
309#define CFG_LBC_LSDMR_1 ( CFG_LBC_LSDMR_COMMON \
310 | CFG_LBC_LSDMR_OP_PCHALL)
311#define CFG_LBC_LSDMR_2 ( CFG_LBC_LSDMR_COMMON \
312 | CFG_LBC_LSDMR_OP_ARFRSH)
313#define CFG_LBC_LSDMR_3 ( CFG_LBC_LSDMR_COMMON \
314 | CFG_LBC_LSDMR_OP_ARFRSH)
315#define CFG_LBC_LSDMR_4 ( CFG_LBC_LSDMR_COMMON \
316 | CFG_LBC_LSDMR_OP_MRW)
317#define CFG_LBC_LSDMR_5 ( CFG_LBC_LSDMR_COMMON \
318 | CFG_LBC_LSDMR_OP_NORMAL)
319#endif
320
321/*
322 * Serial Port
323 */
324#define CONFIG_CONS_INDEX 1
325#undef CONFIG_SERIAL_SOFTWARE_FIFO
326#define CFG_NS16550
327#define CFG_NS16550_SERIAL
328#define CFG_NS16550_REG_SIZE 1
329#define CFG_NS16550_CLK get_bus_freq(0)
330
331#define CFG_BAUDRATE_TABLE \
332 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
333
d239d74b
TT
334#define CFG_NS16550_COM1 (CFG_IMMR+0x4500)
335#define CFG_NS16550_COM2 (CFG_IMMR+0x4600)
991425fe 336
22d71a71 337#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
991425fe
MB
338/* Use the HUSH parser */
339#define CFG_HUSH_PARSER
340#ifdef CFG_HUSH_PARSER
341#define CFG_PROMPT_HUSH_PS2 "> "
342#endif
343
bf0b542d 344/* pass open firmware flat tree */
35cc4e48 345#define CONFIG_OF_LIBFDT 1
bf0b542d 346#define CONFIG_OF_BOARD_SETUP 1
5b8bc606 347#define CONFIG_OF_STDOUT_VIA_ALIAS 1
bf0b542d 348
991425fe
MB
349/* I2C */
350#define CONFIG_HARD_I2C /* I2C with hardware support*/
351#undef CONFIG_SOFT_I2C /* I2C bit-banged */
be5e6181 352#define CONFIG_FSL_I2C
b24f119d
BW
353#define CONFIG_I2C_MULTI_BUS
354#define CONFIG_I2C_CMD_TREE
991425fe
MB
355#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
356#define CFG_I2C_SLAVE 0x7F
b24f119d 357#define CFG_I2C_NOPROBES {{0,0x69}} /* Don't probe these addrs */
991425fe
MB
358#define CFG_I2C_OFFSET 0x3000
359#define CFG_I2C2_OFFSET 0x3100
360
80ddd226 361/* SPI */
8931ab17 362#define CONFIG_MPC8XXX_SPI
80ddd226 363#undef CONFIG_SOFT_SPI /* SPI bit-banged */
80ddd226
BW
364
365/* GPIOs. Used as SPI chip selects */
366#define CFG_GPIO1_PRELIM
367#define CFG_GPIO1_DIR 0xC0000000 /* SPI CS on 0, LED on 1 */
368#define CFG_GPIO1_DAT 0xC0000000 /* Both are active LOW */
369
991425fe
MB
370/* TSEC */
371#define CFG_TSEC1_OFFSET 0x24000
d239d74b 372#define CFG_TSEC1 (CFG_IMMR+CFG_TSEC1_OFFSET)
991425fe 373#define CFG_TSEC2_OFFSET 0x25000
d239d74b 374#define CFG_TSEC2 (CFG_IMMR+CFG_TSEC2_OFFSET)
991425fe 375
8fe9bf61
KG
376/* USB */
377#define CFG_USE_MPC834XSYS_USB_PHY 1 /* Use SYS board PHY */
991425fe
MB
378
379/*
380 * General PCI
381 * Addresses are mapped 1-1.
382 */
383#define CFG_PCI1_MEM_BASE 0x80000000
384#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE
8fe9bf61
KG
385#define CFG_PCI1_MEM_SIZE 0x10000000 /* 256M */
386#define CFG_PCI1_MMIO_BASE 0x90000000
387#define CFG_PCI1_MMIO_PHYS CFG_PCI1_MMIO_BASE
388#define CFG_PCI1_MMIO_SIZE 0x10000000 /* 256M */
991425fe 389#define CFG_PCI1_IO_BASE 0x00000000
8fe9bf61
KG
390#define CFG_PCI1_IO_PHYS 0xE2000000
391#define CFG_PCI1_IO_SIZE 0x00100000 /* 1M */
991425fe
MB
392
393#define CFG_PCI2_MEM_BASE 0xA0000000
394#define CFG_PCI2_MEM_PHYS CFG_PCI2_MEM_BASE
8fe9bf61
KG
395#define CFG_PCI2_MEM_SIZE 0x10000000 /* 256M */
396#define CFG_PCI2_MMIO_BASE 0xB0000000
397#define CFG_PCI2_MMIO_PHYS CFG_PCI2_MMIO_BASE
398#define CFG_PCI2_MMIO_SIZE 0x10000000 /* 256M */
991425fe 399#define CFG_PCI2_IO_BASE 0x00000000
8fe9bf61
KG
400#define CFG_PCI2_IO_PHYS 0xE2100000
401#define CFG_PCI2_IO_SIZE 0x00100000 /* 1M */
991425fe
MB
402
403#if defined(CONFIG_PCI)
404
8fe9bf61 405#define PCI_ONE_PCI1
991425fe
MB
406#if defined(PCI_64BIT)
407#undef PCI_ALL_PCI1
408#undef PCI_TWO_PCI1
409#undef PCI_ONE_PCI1
410#endif
411
412#define CONFIG_NET_MULTI
413#define CONFIG_PCI_PNP /* do pci plug-and-play */
162338e1
IS
414#define CONFIG_83XX_GENERIC_PCI
415#define CONFIG_83XX_PCI_STREAMING
991425fe
MB
416
417#undef CONFIG_EEPRO100
418#undef CONFIG_TULIP
419
420#if !defined(CONFIG_PCI_PNP)
421 #define PCI_ENET0_IOADDR 0xFIXME
422 #define PCI_ENET0_MEMADDR 0xFIXME
53677ef1 423 #define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */
991425fe
MB
424#endif
425
426#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
162338e1 427#define CFG_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */
991425fe
MB
428
429#endif /* CONFIG_PCI */
430
431/*
432 * TSEC configuration
433 */
434#define CONFIG_TSEC_ENET /* TSEC ethernet support */
435
436#if defined(CONFIG_TSEC_ENET)
437#ifndef CONFIG_NET_MULTI
438#define CONFIG_NET_MULTI 1
439#endif
440
441#define CONFIG_GMII 1 /* MII PHY management */
255a3577
KP
442#define CONFIG_TSEC1 1
443#define CONFIG_TSEC1_NAME "TSEC0"
444#define CONFIG_TSEC2 1
445#define CONFIG_TSEC2_NAME "TSEC1"
991425fe
MB
446#define TSEC1_PHY_ADDR 0
447#define TSEC2_PHY_ADDR 1
448#define TSEC1_PHYIDX 0
449#define TSEC2_PHYIDX 0
3a79013e
AF
450#define TSEC1_FLAGS TSEC_GIGABIT
451#define TSEC2_FLAGS TSEC_GIGABIT
991425fe
MB
452
453/* Options are: TSEC[0-1] */
454#define CONFIG_ETHPRIME "TSEC0"
455
456#endif /* CONFIG_TSEC_ENET */
457
458/*
459 * Configure on-board RTC
460 */
461#define CONFIG_RTC_DS1374 /* use ds1374 rtc via i2c */
462#define CFG_I2C_RTC_ADDR 0x68 /* at address 0x68 */
463
464/*
465 * Environment
466 */
467#ifndef CFG_RAMBOOT
468 #define CFG_ENV_IS_IN_FLASH 1
b2893e1f 469 #define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
991425fe
MB
470 #define CFG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */
471 #define CFG_ENV_SIZE 0x2000
472
473/* Address and size of Redundant Environment Sector */
474#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
475#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
476
477#else
478 #define CFG_NO_FLASH 1 /* Flash is not usable now */
93f6d725 479 #define CONFIG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */
991425fe
MB
480 #define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000)
481 #define CFG_ENV_SIZE 0x2000
482#endif
483
484#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
485#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
486
8ea5499a 487
659e2f67
JL
488/*
489 * BOOTP options
490 */
491#define CONFIG_BOOTP_BOOTFILESIZE
492#define CONFIG_BOOTP_BOOTPATH
493#define CONFIG_BOOTP_GATEWAY
494#define CONFIG_BOOTP_HOSTNAME
495
496
8ea5499a
JL
497/*
498 * Command line configuration.
499 */
500#include <config_cmd_default.h>
501
502#define CONFIG_CMD_PING
503#define CONFIG_CMD_I2C
504#define CONFIG_CMD_DATE
505#define CONFIG_CMD_MII
506
991425fe 507#if defined(CONFIG_PCI)
8ea5499a 508 #define CONFIG_CMD_PCI
991425fe 509#endif
8ea5499a
JL
510
511#if defined(CFG_RAMBOOT)
512 #undef CONFIG_CMD_ENV
513 #undef CONFIG_CMD_LOADS
991425fe
MB
514#endif
515
991425fe
MB
516
517#undef CONFIG_WATCHDOG /* watchdog disabled */
518
519/*
520 * Miscellaneous configurable options
521 */
522#define CFG_LONGHELP /* undef to save memory */
523#define CFG_LOAD_ADDR 0x2000000 /* default load address */
524#define CFG_PROMPT "=> " /* Monitor Command Prompt */
525
8ea5499a 526#if defined(CONFIG_CMD_KGDB)
991425fe
MB
527 #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
528#else
529 #define CFG_CBSIZE 256 /* Console I/O Buffer Size */
530#endif
531
532#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
533#define CFG_MAXARGS 16 /* max number of command args */
534#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
535#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */
536
537/*
538 * For booting Linux, the board info and command line data
539 * have to be in the first 8 MB of memory, since this is
540 * the maximum mapped by the Linux kernel during initialization.
541 */
542#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/
543
991425fe
MB
544#define CFG_RCWH_PCIHOST 0x80000000 /* PCIHOST */
545
546#if 1 /*528/264*/
547#define CFG_HRCW_LOW (\
548 HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
549 HRCWL_DDR_TO_SCB_CLK_1X1 |\
8fe9bf61 550 HRCWL_CSB_TO_CLKIN |\
991425fe
MB
551 HRCWL_VCO_1X2 |\
552 HRCWL_CORE_TO_CSB_2X1)
553#elif 0 /*396/132*/
554#define CFG_HRCW_LOW (\
555 HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
556 HRCWL_DDR_TO_SCB_CLK_1X1 |\
8fe9bf61 557 HRCWL_CSB_TO_CLKIN |\
991425fe
MB
558 HRCWL_VCO_1X4 |\
559 HRCWL_CORE_TO_CSB_3X1)
560#elif 0 /*264/132*/
561#define CFG_HRCW_LOW (\
562 HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
563 HRCWL_DDR_TO_SCB_CLK_1X1 |\
8fe9bf61 564 HRCWL_CSB_TO_CLKIN |\
991425fe
MB
565 HRCWL_VCO_1X4 |\
566 HRCWL_CORE_TO_CSB_2X1)
567#elif 0 /*132/132*/
568#define CFG_HRCW_LOW (\
569 HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
570 HRCWL_DDR_TO_SCB_CLK_1X1 |\
8fe9bf61 571 HRCWL_CSB_TO_CLKIN |\
991425fe
MB
572 HRCWL_VCO_1X4 |\
573 HRCWL_CORE_TO_CSB_1X1)
574#elif 0 /*264/264 */
575#define CFG_HRCW_LOW (\
576 HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
577 HRCWL_DDR_TO_SCB_CLK_1X1 |\
8fe9bf61 578 HRCWL_CSB_TO_CLKIN |\
991425fe
MB
579 HRCWL_VCO_1X4 |\
580 HRCWL_CORE_TO_CSB_1X1)
581#endif
582
447ad576
IS
583#ifdef CONFIG_PCISLAVE
584#define CFG_HRCW_HIGH (\
585 HRCWH_PCI_AGENT |\
586 HRCWH_64_BIT_PCI |\
587 HRCWH_PCI1_ARBITER_DISABLE |\
588 HRCWH_PCI2_ARBITER_DISABLE |\
589 HRCWH_CORE_ENABLE |\
590 HRCWH_FROM_0X00000100 |\
591 HRCWH_BOOTSEQ_DISABLE |\
592 HRCWH_SW_WATCHDOG_DISABLE |\
593 HRCWH_ROM_LOC_LOCAL_16BIT |\
594 HRCWH_TSEC1M_IN_GMII |\
595 HRCWH_TSEC2M_IN_GMII )
596#else
991425fe
MB
597#if defined(PCI_64BIT)
598#define CFG_HRCW_HIGH (\
599 HRCWH_PCI_HOST |\
600 HRCWH_64_BIT_PCI |\
601 HRCWH_PCI1_ARBITER_ENABLE |\
602 HRCWH_PCI2_ARBITER_DISABLE |\
603 HRCWH_CORE_ENABLE |\
604 HRCWH_FROM_0X00000100 |\
605 HRCWH_BOOTSEQ_DISABLE |\
606 HRCWH_SW_WATCHDOG_DISABLE |\
607 HRCWH_ROM_LOC_LOCAL_16BIT |\
608 HRCWH_TSEC1M_IN_GMII |\
609 HRCWH_TSEC2M_IN_GMII )
610#else
611#define CFG_HRCW_HIGH (\
612 HRCWH_PCI_HOST |\
613 HRCWH_32_BIT_PCI |\
614 HRCWH_PCI1_ARBITER_ENABLE |\
615 HRCWH_PCI2_ARBITER_ENABLE |\
616 HRCWH_CORE_ENABLE |\
617 HRCWH_FROM_0X00000100 |\
618 HRCWH_BOOTSEQ_DISABLE |\
619 HRCWH_SW_WATCHDOG_DISABLE |\
620 HRCWH_ROM_LOC_LOCAL_16BIT |\
621 HRCWH_TSEC1M_IN_GMII |\
622 HRCWH_TSEC2M_IN_GMII )
447ad576
IS
623#endif /* PCI_64BIT */
624#endif /* CONFIG_PCISLAVE */
991425fe 625
a5fe514e
LN
626/*
627 * System performance
628 */
629#define CFG_ACR_PIPE_DEP 3 /* Arbiter pipeline depth (0-3) */
630#define CFG_ACR_RPTCNT 3 /* Arbiter repeat count (0-7) */
631#define CFG_SPCR_TSEC1EP 3 /* TSEC1 emergency priority (0-3) */
632#define CFG_SPCR_TSEC2EP 3 /* TSEC2 emergency priority (0-3) */
633#define CFG_SCCR_TSEC1CM 1 /* TSEC1 clock mode (0-3) */
634#define CFG_SCCR_TSEC2CM 1 /* TSEC2 & I2C0 clock mode (0-3) */
635
991425fe
MB
636/* System IO Config */
637#define CFG_SICRH SICRH_TSOBI1
638#define CFG_SICRL SICRL_LDP_A
639
640#define CFG_HID0_INIT 0x000000000
8fe9bf61 641#define CFG_HID0_FINAL HID0_ENABLE_MACHINE_CHECK
991425fe
MB
642
643/* #define CFG_HID0_FINAL (\
644 HID0_ENABLE_INSTRUCTION_CACHE |\
645 HID0_ENABLE_M_BIT |\
646 HID0_ENABLE_ADDRESS_BROADCAST ) */
647
648
649#define CFG_HID2 HID2_HBE
31d82672 650#define CONFIG_HIGH_BATS 1 /* High BATs supported */
991425fe
MB
651
652/* DDR @ 0x00000000 */
653#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
654#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
655
656/* PCI @ 0x80000000 */
657#ifdef CONFIG_PCI
658#define CFG_IBAT1L (CFG_PCI1_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
659#define CFG_IBAT1U (CFG_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
660#define CFG_IBAT2L (CFG_PCI1_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
661#define CFG_IBAT2U (CFG_PCI1_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
662#else
663#define CFG_IBAT1L (0)
664#define CFG_IBAT1U (0)
665#define CFG_IBAT2L (0)
666#define CFG_IBAT2U (0)
667#endif
668
8fe9bf61
KG
669#ifdef CONFIG_MPC83XX_PCI2
670#define CFG_IBAT3L (CFG_PCI2_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
671#define CFG_IBAT3U (CFG_PCI2_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
672#define CFG_IBAT4L (CFG_PCI2_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
673#define CFG_IBAT4U (CFG_PCI2_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
674#else
675#define CFG_IBAT3L (0)
676#define CFG_IBAT3U (0)
677#define CFG_IBAT4L (0)
678#define CFG_IBAT4U (0)
679#endif
991425fe 680
8fe9bf61 681/* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */
d239d74b
TT
682#define CFG_IBAT5L (CFG_IMMR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
683#define CFG_IBAT5U (CFG_IMMR | BATU_BL_256M | BATU_VS | BATU_VP)
991425fe 684
8fe9bf61
KG
685/* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */
686#define CFG_IBAT6L (0xF0000000 | BATL_PP_10 | BATL_MEMCOHERENCE)
687#define CFG_IBAT6U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
991425fe 688
8fe9bf61
KG
689#define CFG_IBAT7L (0)
690#define CFG_IBAT7U (0)
991425fe
MB
691
692#define CFG_DBAT0L CFG_IBAT0L
693#define CFG_DBAT0U CFG_IBAT0U
694#define CFG_DBAT1L CFG_IBAT1L
695#define CFG_DBAT1U CFG_IBAT1U
696#define CFG_DBAT2L CFG_IBAT2L
697#define CFG_DBAT2U CFG_IBAT2U
698#define CFG_DBAT3L CFG_IBAT3L
699#define CFG_DBAT3U CFG_IBAT3U
700#define CFG_DBAT4L CFG_IBAT4L
701#define CFG_DBAT4U CFG_IBAT4U
702#define CFG_DBAT5L CFG_IBAT5L
703#define CFG_DBAT5U CFG_IBAT5U
704#define CFG_DBAT6L CFG_IBAT6L
705#define CFG_DBAT6U CFG_IBAT6U
706#define CFG_DBAT7L CFG_IBAT7L
707#define CFG_DBAT7U CFG_IBAT7U
708
709/*
710 * Internal Definitions
711 *
712 * Boot Flags
713 */
714#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
715#define BOOTFLAG_WARM 0x02 /* Software reboot */
716
8ea5499a 717#if defined(CONFIG_CMD_KGDB)
991425fe
MB
718#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */
719#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
720#endif
721
722/*
723 * Environment Configuration
724 */
725#define CONFIG_ENV_OVERWRITE
726
727#if defined(CONFIG_TSEC_ENET)
728#define CONFIG_ETHADDR 00:04:9f:ef:23:33
729#define CONFIG_HAS_ETH1
10327dc5 730#define CONFIG_HAS_ETH0
991425fe
MB
731#define CONFIG_ETH1ADDR 00:E0:0C:00:7E:21
732#endif
733
bf0b542d 734#define CONFIG_IPADDR 192.168.1.253
991425fe
MB
735
736#define CONFIG_HOSTNAME mpc8349emds
bf0b542d
KP
737#define CONFIG_ROOTPATH /nfsroot/rootfs
738#define CONFIG_BOOTFILE uImage
991425fe
MB
739
740#define CONFIG_SERVERIP 192.168.1.1
741#define CONFIG_GATEWAYIP 192.168.1.1
742#define CONFIG_NETMASK 255.255.255.0
743
b2115757 744#define CONFIG_LOADADDR 500000 /* default location for tftp and bootm */
991425fe
MB
745
746#define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */
747#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
748
749#define CONFIG_BAUDRATE 115200
750
751#define CONFIG_PREBOOT "echo;" \
32bf3d14 752 "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
991425fe
MB
753 "echo"
754
755#define CONFIG_EXTRA_ENV_SETTINGS \
756 "netdev=eth0\0" \
757 "hostname=mpc8349emds\0" \
758 "nfsargs=setenv bootargs root=/dev/nfs rw " \
759 "nfsroot=${serverip}:${rootpath}\0" \
760 "ramargs=setenv bootargs root=/dev/ram rw\0" \
761 "addip=setenv bootargs ${bootargs} " \
762 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
763 ":${hostname}:${netdev}:off panic=1\0" \
764 "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
765 "flash_nfs=run nfsargs addip addtty;" \
766 "bootm ${kernel_addr}\0" \
767 "flash_self=run ramargs addip addtty;" \
768 "bootm ${kernel_addr} ${ramdisk_addr}\0" \
769 "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \
770 "bootm\0" \
991425fe
MB
771 "load=tftp 100000 /tftpboot/mpc8349emds/u-boot.bin\0" \
772 "update=protect off fe000000 fe03ffff; " \
773 "era fe000000 fe03ffff; cp.b 100000 fe000000 ${filesize}\0" \
d8ab58b2 774 "upd=run load update\0" \
bf0b542d
KP
775 "fdtaddr=400000\0" \
776 "fdtfile=mpc8349emds.dtb\0" \
991425fe
MB
777 ""
778
bf0b542d
KP
779#define CONFIG_NFSBOOTCOMMAND \
780 "setenv bootargs root=/dev/nfs rw " \
781 "nfsroot=$serverip:$rootpath " \
782 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
783 "console=$consoledev,$baudrate $othbootargs;" \
784 "tftp $loadaddr $bootfile;" \
785 "tftp $fdtaddr $fdtfile;" \
786 "bootm $loadaddr - $fdtaddr"
787
788#define CONFIG_RAMBOOTCOMMAND \
789 "setenv bootargs root=/dev/ram rw " \
790 "console=$consoledev,$baudrate $othbootargs;" \
791 "tftp $ramdiskaddr $ramdiskfile;" \
792 "tftp $loadaddr $bootfile;" \
793 "tftp $fdtaddr $fdtfile;" \
794 "bootm $loadaddr $ramdiskaddr $fdtaddr"
795
991425fe
MB
796#define CONFIG_BOOTCOMMAND "run flash_self"
797
798#endif /* __CONFIG_H */