[people/ms/u-boot.git] / include / configs / MPC8540EVAL.h

/*
 * (C) Copyright 2002,2003 Motorola,Inc.
 * Modified by Lunsheng Wang, lunsheng@sohu.com
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

/* mpc8540eval board configuration file */
/* please refer to doc/README.mpc85xxads for more info */
/* make sure you change the MAC address and other network params first,
 * search for CONFIG_ETHADDR,CONFIG_SERVERIP,etc in this file
 */

#ifndef __CONFIG_H
#define __CONFIG_H
/* High Level Configuration Options */
#define CONFIG_BOOKE		1	    /* BOOKE 			*/
#define CONFIG_E500		1	    /* BOOKE e500 family	*/
#define CONFIG_MPC85xx		1	    /* MPC8540/MPC8560		*/
#define CONFIG_MPC8540		1	    /* MPC8540 specific	        */
#define CONFIG_MPC8540EVAL	1	    /* MPC8540EVAL board specific */

#undef  CONFIG_PCI	         	    /* pci ethernet support	*/
#define CONFIG_TSEC_ENET 		    /* tsec ethernet support  */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_SPD_EEPROM                   /* Use SPD EEPROM for DDR setup */
#undef  CONFIG_DDR_ECC			    /* only for ECC DDR module */
#define CONFIG_DDR_DLL                      /* possible DLL fix needed */

/* Using Localbus SDRAM to emulate flash before we can program the flash,
 * normally you only need a flash-boot image(u-boot.bin),if unsure undef this.
 * Not availabe for EVAL board
 */
#undef CONFIG_RAM_AS_FLASH

/* sysclk for MPC8540EVAL */
#if defined(CONFIG_SYSCLK_66M)
	/*
	 * the oscillator on board is 66Mhz
	 * can also get 66M clock from external PCI
	 */
	#define CONFIG_SYS_CLK_FREQ   66000000
#else
	#define CONFIG_SYS_CLK_FREQ   33000000   /* most pci cards are 33Mhz */
#endif

/* below can be toggled for performance analysis. otherwise use default */
#define CONFIG_L2_CACHE		    	    /* toggle L2 cache 	*/
#undef  CONFIG_BTB			    /* toggle branch predition */
#undef  CONFIG_ADDR_STREAMING		    /* toggle addr streaming   */

#define CONFIG_BOARD_PRE_INIT	1	    /* Call board_pre_init	*/

#undef	CFG_DRAM_TEST			    /* memory test, takes time  */
#define CFG_MEMTEST_START	0x00200000	/* memtest works on	*/
#define CFG_MEMTEST_END		0x00400000

#if defined(CONFIG_PCI) && defined(CONFIG_TSEC_ENET)
#error "You can only use either PCI Ethernet Card or TSEC Ethernet, not both."
#endif

/*
 * Base addresses -- Note these are effective addresses where the
 * actual resources get mapped (not physical addresses)
 */
#define CFG_CCSRBAR_DEFAULT 	0xff700000	/* CCSRBAR Default	*/
#define CFG_CCSRBAR		0xe0000000	/* relocated CCSRBAR 	*/
#define CFG_IMMR		CFG_CCSRBAR	/* PQII uses CFG_IMMR	*/

#define CFG_DDR_SDRAM_BASE	0x00000000	/* DDR is system memory  */
#define CFG_SDRAM_BASE		CFG_DDR_SDRAM_BASE
#define CFG_SDRAM_SIZE		256             /* DDR is now 256MB     */

#if defined(CONFIG_RAM_AS_FLASH)
#define CFG_LBC_SDRAM_BASE	0xfc000000	/* Localbus SDRAM */
#else
#define CFG_LBC_SDRAM_BASE      0xf0000000      /* Localbus SDRAM */
#endif
#define CFG_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 0MB	*/

#if defined(CONFIG_RAM_AS_FLASH)
#define CFG_FLASH_BASE          0xf8000000      /* start of FLASH  16M  */
#define CFG_BR0_PRELIM          0xf8001801      /* port size 32bit */
#else /* Boot from real Flash */
#define CFG_FLASH_BASE		0xff800000	/* start of FLASH 8M    */
#define CFG_BR0_PRELIM		0xff801001	/* port size 16bit	*/
#endif

#define	CFG_OR0_PRELIM		0xff806f67	/* 8MB Flash		*/
#define CFG_MAX_FLASH_BANKS	1		/* number of banks	*/
#define CFG_MAX_FLASH_SECT	64		/* sectors per device   */
#undef	CFG_FLASH_CHECKSUM
#define CFG_FLASH_ERASE_TOUT	60000	/* Timeout for Flash Erase (in ms)*/
#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)*/
#define CFG_FLASH_CFI		1

#define CFG_MONITOR_BASE    	TEXT_BASE	/* start of monitor */

#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
#define CFG_RAMBOOT
#else
#undef  CFG_RAMBOOT
#endif

#define SPD_EEPROM_ADDRESS	0x51		/* DDR DIMM */

/* Here some DDR setting should be added */


#undef CONFIG_CLOCKS_IN_MHZ

/* local bus definitions */
#define CFG_BR2_PRELIM		0xf0001861	/* 64MB localbus SDRAM  */
#define CFG_OR2_PRELIM		0xfc006901
#define CFG_LBC_LCRR		0x00030004	/* local bus freq divider*/
#define CFG_LBC_LBCR		0x00000000
#define CFG_LBC_LSRT		0x20000000
#define CFG_LBC_MRTPR		0x20000000
#define CFG_LBC_LSDMR_1		0x2861b723
#define CFG_LBC_LSDMR_2		0x0861b723
#define CFG_LBC_LSDMR_3		0x0861b723
#define CFG_LBC_LSDMR_4		0x1861b723
#define CFG_LBC_LSDMR_5		0x4061b723

#if defined(CONFIG_RAM_AS_FLASH)
#define CFG_BR4_PRELIM          0xf8000801      /* 32KB, 8-bit wide for ADS config reg */
#else
#define CFG_BR4_PRELIM          0xf8000801      /* 32KB, 8-bit wide for ADS config reg */
#endif
#define CFG_OR4_PRELIM          0xffffe1f1
#define CFG_BCSR                (CFG_BR4_PRELIM & 0xffff8000)

#define CONFIG_L1_INIT_RAM
#define CFG_INIT_RAM_LOCK 	1
#define CFG_INIT_RAM_ADDR   	0x40000000 	/* Initial RAM address	*/
#define CFG_INIT_RAM_END    	0x4000	    	/* End of used area in RAM */

#define CFG_GBL_DATA_SIZE  	128		/* num bytes initial data */
#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET

#define CFG_MONITOR_LEN	    	(256 * 1024)    /* Reserve 256 kB for Mon */
#define CFG_MALLOC_LEN	    	(128 * 1024)    /* Reserved for malloc */

/* Serial Port */
#define CONFIG_CONS_INDEX     1
#undef	CONFIG_SERIAL_SOFTWARE_FIFO
#define CFG_NS16550
#define CFG_NS16550_SERIAL
#define CFG_NS16550_REG_SIZE    1
#define CFG_NS16550_CLK		get_bus_freq(0)
#define CONFIG_BAUDRATE	 	115200

#define CFG_BAUDRATE_TABLE  \
	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}

#define CFG_NS16550_COM1        (CFG_CCSRBAR+0x4500)
#define CFG_NS16550_COM2        (CFG_CCSRBAR+0x4600)

/* Use the HUSH parser */
#define CFG_HUSH_PARSER
#ifdef  CFG_HUSH_PARSER
#define CFG_PROMPT_HUSH_PS2 "> "
#endif

/*
 * I2C
 */
#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
#define CONFIG_HARD_I2C		/* I2C with hardware support*/
#undef	CONFIG_SOFT_I2C			/* I2C bit-banged		*/
#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
#define CFG_I2C_SLAVE		0x7F
#define CFG_I2C_NOPROBES        {0x69}	/* Don't probe these addrs */
#define CFG_I2C_OFFSET		0x3000

/* General PCI */
#define CFG_PCI_MEM_BASE	0x80000000
#define CFG_PCI_MEM_PHYS	0x80000000
#define CFG_PCI_MEM_SIZE	0x20000000
#define CFG_PCI_IO_BASE         0xe2000000

#if defined(CONFIG_PCI)
#define CONFIG_NET_MULTI
#undef CONFIG_EEPRO100
#define CONFIG_TULIP
#define CONFIG_PCI_PNP	               	/* do pci plug-and-play */
#if !defined(CONFIG_PCI_PNP)
#define PCI_ENET0_IOADDR      0xe0000000
#define PCI_ENET0_MEMADDR     0xe0000000
#define PCI_IDSEL_NUMBER      0x0c 	/*slot0->3(IDSEL)=12->15*/
#endif
#define CONFIG_PCI_SCAN_SHOW    1       /* show pci devices on startup  */
#define CFG_PCI_SUBSYS_VENDORID 0x1057  /* Motorola */
#define CFG_PCI_SUBSYS_DEVICEID 0x0008
#elif defined(CONFIG_TSEC_ENET)
#define CONFIG_NET_MULTI 	1
#define CONFIG_MII		1	/* MII PHY management	*/
#define CONFIG_TSEC1    1
#define CONFIG_TSEC1_NAME      "TSEC0"
#define CONFIG_TSEC2	1
#define CONFIG_TSEC2_NAME      "TSEC1"
#define CONFIG_MPC85XX_FEC      1
#define CONFIG_MPC85XX_FEC_NAME                "FEC"
#define TSEC1_PHY_ADDR          7
#define	TSEC2_PHY_ADDR		4
#define FEC_PHY_ADDR            2
#define TSEC1_PHYIDX            0
#define TSEC2_PHYIDX            0
#define FEC_PHYIDX              0
/* Options are: TSEC[0-1], FEC */
#define CONFIG_ETHPRIME                "TSEC0"

#define CONFIG_PHY_M88E1011     1       /* GigaBit Ether PHY    */
#define INTEL_LXT971_PHY	1
#endif

#undef DEBUG

/* Environment */
#ifndef CFG_RAMBOOT
#if defined(CONFIG_RAM_AS_FLASH)
#define CFG_ENV_IS_NOWHERE
#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x100000)
#define CFG_ENV_SIZE		0x2000
#else
#define CFG_ENV_IS_IN_FLASH	1
#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x40000)
#define CFG_ENV_SECT_SIZE	0x40000	/* 256K(one sector) for env */
#endif
#define CFG_ENV_SIZE		0x2000
#else
/* #define CFG_NO_FLASH		1 */	/* Flash is not usable now	*/
#define CFG_ENV_IS_NOWHERE	1	/* Store ENV in memory only	*/
#define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
#define CFG_ENV_SIZE		0x2000
#endif

#define CONFIG_BOOTARGS	"root=/dev/ram rw console=ttyS0,115200"
#define CONFIG_BOOTCOMMAND	"bootm 0xff800000 0xffa00000"
#define CONFIG_BOOTDELAY	3 	/* -1 disable autoboot */

#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/


/*
 * BOOTP options
 */
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME


/*
 * Command line configuration.
 */
#include <config_cmd_default.h>

#define CONFIG_CMD_PING
#define CONFIG_CMD_I2C

#if defined(CONFIG_PCI)
    #define CONFIG_CMD_PCI
#endif

#if defined(CFG_RAMBOOT) || defined(CONFIG_RAM_AS_FLASH)
    #undef CONFIG_CMD_ENV
    #undef CONFIG_CMD_LOADS
#endif


#undef CONFIG_WATCHDOG			/* watchdog disabled		*/

/*
 * Miscellaneous configurable options
 */
#define CFG_LONGHELP			/* undef to save memory		*/
#define CFG_LOAD_ADDR   0x2000000       /* default load address */
#define CFG_PROMPT	"MPC8540EVAL=> "/* Monitor Command Prompt	*/
#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
#else
#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
#endif
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define CFG_MAXARGS	16		/* max number of command args	*/
#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 8 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization.
 */
#define CFG_BOOTMAPSZ	(8 << 20) 	/* Initial Memory map for Linux */

/* Cache Configuration */
#define CFG_DCACHE_SIZE	32768
#define CFG_CACHELINE_SIZE	32
#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
#endif

/*
 * Internal Definitions
 *
 * Boot Flags
 */
#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM	0x02		/* Software reboot		*/

#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
#endif

/*****************************/
/* Environment Configuration */
/*****************************/
/* The mac addresses for all ethernet interface */
/* NOTE: change below for your network setting!!! */
#if defined(CONFIG_TSEC_ENET)
#define CONFIG_ETHADDR  00:01:af:07:9b:8a
#define CONFIG_ETH1ADDR  00:01:af:07:9b:8b
#define CONFIG_ETH2ADDR  00:01:af:07:9b:8c
#endif

#define CONFIG_ROOTPATH  /nfsroot
#define CONFIG_BOOTFILE  your.uImage

#define CONFIG_SERVERIP         192.168.101.1
#define CONFIG_IPADDR           192.168.101.11
#define CONFIG_GATEWAYIP        192.168.101.0
#define CONFIG_NETMASK          255.255.255.0

#define CONFIG_LOADADDR  200000   /* default location for tftp and bootm */

#define CONFIG_HOSTNAME         MPC8540EVAL

#endif	/* __CONFIG_H */
Commit	Line	Data
b0e32949 LW	1	/*
	2	* (C) Copyright 2002,2003 Motorola,Inc.
	3	* Modified by Lunsheng Wang, lunsheng@sohu.com
	4	*
	5	* See file CREDITS for list of people who contributed to this
	6	* project.
	7	*
	8	* This program is free software; you can redistribute it and/or
	9	* modify it under the terms of the GNU General Public License as
	10	* published by the Free Software Foundation; either version 2 of
	11	* the License, or (at your option) any later version.
	12	*
	13	* This program is distributed in the hope that it will be useful,
	14	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	15	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	16	* GNU General Public License for more details.
	17	*
	18	* You should have received a copy of the GNU General Public License
	19	* along with this program; if not, write to the Free Software
	20	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	21	* MA 02111-1307 USA
	22	*/
	23
	24	/* mpc8540eval board configuration file */
	25	/* please refer to doc/README.mpc85xxads for more info */
	26	/* make sure you change the MAC address and other network params first,
	27	* search for CONFIG_ETHADDR,CONFIG_SERVERIP,etc in this file
	28	*/
	29
	30	#ifndef __CONFIG_H
	31	#define __CONFIG_H
	32	/* High Level Configuration Options */
	33	#define CONFIG_BOOKE 1 /* BOOKE */
	34	#define CONFIG_E500 1 /* BOOKE e500 family */
	35	#define CONFIG_MPC85xx 1 /* MPC8540/MPC8560 */
	36	#define CONFIG_MPC8540 1 /* MPC8540 specific */
	37	#define CONFIG_MPC8540EVAL 1 /* MPC8540EVAL board specific */
	38
	39	#undef CONFIG_PCI /* pci ethernet support */
	40	#define CONFIG_TSEC_ENET /* tsec ethernet support */
	41	#define CONFIG_ENV_OVERWRITE
	42	#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */
	43	#undef CONFIG_DDR_ECC /* only for ECC DDR module */
	44	#define CONFIG_DDR_DLL /* possible DLL fix needed */
	45
	46	/* Using Localbus SDRAM to emulate flash before we can program the flash,
	47	* normally you only need a flash-boot image(u-boot.bin),if unsure undef this.
	48	* Not availabe for EVAL board
	49	*/
	50	#undef CONFIG_RAM_AS_FLASH
	51
	52	/* sysclk for MPC8540EVAL */
	53	#if defined(CONFIG_SYSCLK_66M)
de1d0a69 JL	54	/*
	55	* the oscillator on board is 66Mhz
	56	* can also get 66M clock from external PCI
	57	*/
	58	#define CONFIG_SYS_CLK_FREQ 66000000
b0e32949	59	#else
de1d0a69	60	#define CONFIG_SYS_CLK_FREQ 33000000 /* most pci cards are 33Mhz */
b0e32949 LW	61	#endif
	62
	63	/* below can be toggled for performance analysis. otherwise use default */
	64	#define CONFIG_L2_CACHE /* toggle L2 cache */
	65	#undef CONFIG_BTB /* toggle branch predition */
	66	#undef CONFIG_ADDR_STREAMING /* toggle addr streaming */
	67
	68	#define CONFIG_BOARD_PRE_INIT 1 /* Call board_pre_init */
	69
	70	#undef CFG_DRAM_TEST /* memory test, takes time */
	71	#define CFG_MEMTEST_START 0x00200000 /* memtest works on */
	72	#define CFG_MEMTEST_END 0x00400000
	73
	74	#if defined(CONFIG_PCI) && defined(CONFIG_TSEC_ENET)
	75	#error "You can only use either PCI Ethernet Card or TSEC Ethernet, not both."
	76	#endif
	77
	78	/*
	79	* Base addresses -- Note these are effective addresses where the
	80	* actual resources get mapped (not physical addresses)
	81	*/
	82	#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
	83	#define CFG_CCSRBAR 0xe0000000 /* relocated CCSRBAR */
	84	#define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */
	85
	86	#define CFG_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory */
	87	#define CFG_SDRAM_BASE CFG_DDR_SDRAM_BASE
	88	#define CFG_SDRAM_SIZE 256 /* DDR is now 256MB */
	89
	90	#if defined(CONFIG_RAM_AS_FLASH)
	91	#define CFG_LBC_SDRAM_BASE 0xfc000000 /* Localbus SDRAM */
	92	#else
	93	#define CFG_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */
	94	#endif
	95	#define CFG_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 0MB */
	96
	97	#if defined(CONFIG_RAM_AS_FLASH)
	98	#define CFG_FLASH_BASE 0xf8000000 /* start of FLASH 16M */
	99	#define CFG_BR0_PRELIM 0xf8001801 /* port size 32bit */
	100	#else /* Boot from real Flash */
	101	#define CFG_FLASH_BASE 0xff800000 /* start of FLASH 8M */
	102	#define CFG_BR0_PRELIM 0xff801001 /* port size 16bit */
	103	#endif
	104
	105	#define CFG_OR0_PRELIM 0xff806f67 /* 8MB Flash */
	106	#define CFG_MAX_FLASH_BANKS 1 /* number of banks */
	107	#define CFG_MAX_FLASH_SECT 64 /* sectors per device */
	108	#undef CFG_FLASH_CHECKSUM
	109	#define CFG_FLASH_ERASE_TOUT 60000 /* Timeout for Flash Erase (in ms)*/
	110	#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms)*/
	111	#define CFG_FLASH_CFI 1
	112
	113	#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
	114
	115	#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
	116	#define CFG_RAMBOOT
	117	#else
	118	#undef CFG_RAMBOOT
	119	#endif
	120
	121	#define SPD_EEPROM_ADDRESS 0x51 /* DDR DIMM */
	122
	123	/* Here some DDR setting should be added */
	124
125
126	#undef CONFIG_CLOCKS_IN_MHZ
127
128	/* local bus definitions */
129	#define CFG_BR2_PRELIM 0xf0001861 /* 64MB localbus SDRAM */
130	#define CFG_OR2_PRELIM 0xfc006901
131	#define CFG_LBC_LCRR 0x00030004 /* local bus freq divider*/
132	#define CFG_LBC_LBCR 0x00000000
133	#define CFG_LBC_LSRT 0x20000000
134	#define CFG_LBC_MRTPR 0x20000000
135	#define CFG_LBC_LSDMR_1 0x2861b723
136	#define CFG_LBC_LSDMR_2 0x0861b723
137	#define CFG_LBC_LSDMR_3 0x0861b723
138	#define CFG_LBC_LSDMR_4 0x1861b723
139	#define CFG_LBC_LSDMR_5 0x4061b723
140
141	#if defined(CONFIG_RAM_AS_FLASH)
142	#define CFG_BR4_PRELIM 0xf8000801 /* 32KB, 8-bit wide for ADS config reg */
143	#else
144	#define CFG_BR4_PRELIM 0xf8000801 /* 32KB, 8-bit wide for ADS config reg */
145	#endif
146	#define CFG_OR4_PRELIM 0xffffe1f1
147	#define CFG_BCSR (CFG_BR4_PRELIM & 0xffff8000)
148
149	#define CONFIG_L1_INIT_RAM
150	#define CFG_INIT_RAM_LOCK 1
151	#define CFG_INIT_RAM_ADDR 0x40000000 /* Initial RAM address */
152	#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */
153
154	#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
155	#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
156	#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
157
158	#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
159	#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
160
161	/* Serial Port */
162	#define CONFIG_CONS_INDEX 1
163	#undef CONFIG_SERIAL_SOFTWARE_FIFO
164	#define CFG_NS16550
165	#define CFG_NS16550_SERIAL
166	#define CFG_NS16550_REG_SIZE 1
167	#define CFG_NS16550_CLK get_bus_freq(0)
168	#define CONFIG_BAUDRATE 115200
169
170	#define CFG_BAUDRATE_TABLE \
171	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
172
173	#define CFG_NS16550_COM1 (CFG_CCSRBAR+0x4500)
174	#define CFG_NS16550_COM2 (CFG_CCSRBAR+0x4600)
175
176	/* Use the HUSH parser */
177	#define CFG_HUSH_PARSER
178	#ifdef CFG_HUSH_PARSER
179	#define CFG_PROMPT_HUSH_PS2 "> "
180	#endif
181
20476726 JL	182	/*
	183	* I2C
	184	*/
	185	#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
	186	#define CONFIG_HARD_I2C /* I2C with hardware support*/
b0e32949 LW	187	#undef CONFIG_SOFT_I2C /* I2C bit-banged */
	188	#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
	189	#define CFG_I2C_SLAVE 0x7F
	190	#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */
20476726	191	#define CFG_I2C_OFFSET 0x3000
b0e32949 LW	192
	193	/* General PCI */
	194	#define CFG_PCI_MEM_BASE 0x80000000
	195	#define CFG_PCI_MEM_PHYS 0x80000000
	196	#define CFG_PCI_MEM_SIZE 0x20000000
	197	#define CFG_PCI_IO_BASE 0xe2000000
	198
	199	#if defined(CONFIG_PCI)
	200	#define CONFIG_NET_MULTI
	201	#undef CONFIG_EEPRO100
	202	#define CONFIG_TULIP
	203	#define CONFIG_PCI_PNP /* do pci plug-and-play */
de1d0a69 JL	204	#if !defined(CONFIG_PCI_PNP)
	205	#define PCI_ENET0_IOADDR 0xe0000000
	206	#define PCI_ENET0_MEMADDR 0xe0000000
	207	#define PCI_IDSEL_NUMBER 0x0c /slot0->3(IDSEL)=12->15/
	208	#endif
b0e32949 LW	209	#define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */
	210	#define CFG_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */
	211	#define CFG_PCI_SUBSYS_DEVICEID 0x0008
	212	#elif defined(CONFIG_TSEC_ENET)
	213	#define CONFIG_NET_MULTI 1
	214	#define CONFIG_MII 1 /* MII PHY management */
255a3577 KP	215	#define CONFIG_TSEC1 1
	216	#define CONFIG_TSEC1_NAME "TSEC0"
	217	#define CONFIG_TSEC2 1
	218	#define CONFIG_TSEC2_NAME "TSEC1"
b0e32949 LW	219	#define CONFIG_MPC85XX_FEC 1
	220	#define CONFIG_MPC85XX_FEC_NAME "FEC"
	221	#define TSEC1_PHY_ADDR 7
	222	#define TSEC2_PHY_ADDR 4
	223	#define FEC_PHY_ADDR 2
	224	#define TSEC1_PHYIDX 0
	225	#define TSEC2_PHYIDX 0
	226	#define FEC_PHYIDX 0
	227	/* Options are: TSEC[0-1], FEC */
	228	#define CONFIG_ETHPRIME "TSEC0"
	229
	230	#define CONFIG_PHY_M88E1011 1 /* GigaBit Ether PHY */
de1d0a69	231	#define INTEL_LXT971_PHY 1
b0e32949 LW	232	#endif
	233
	234	#undef DEBUG
	235
	236	/* Environment */
	237	#ifndef CFG_RAMBOOT
de1d0a69 JL	238	#if defined(CONFIG_RAM_AS_FLASH)
	239	#define CFG_ENV_IS_NOWHERE
	240	#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x100000)
	241	#define CFG_ENV_SIZE 0x2000
	242	#else
	243	#define CFG_ENV_IS_IN_FLASH 1
	244	#define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000)
	245	#define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */
	246	#endif
	247	#define CFG_ENV_SIZE 0x2000
b0e32949 LW	248	#else
	249	/* #define CFG_NO_FLASH 1 / / Flash is not usable now */
	250	#define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */
	251	#define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000)
	252	#define CFG_ENV_SIZE 0x2000
	253	#endif
	254
b0e32949 LW	255	#define CONFIG_BOOTARGS "root=/dev/ram rw console=ttyS0,115200"
	256	#define CONFIG_BOOTCOMMAND "bootm 0xff800000 0xffa00000"
	257	#define CONFIG_BOOTDELAY 3 /* -1 disable autoboot */
	258
	259	#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
	260	#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
	261
2835e518	262
659e2f67 JL	263	/*
	264	* BOOTP options
	265	*/
	266	#define CONFIG_BOOTP_BOOTFILESIZE
	267	#define CONFIG_BOOTP_BOOTPATH
	268	#define CONFIG_BOOTP_GATEWAY
	269	#define CONFIG_BOOTP_HOSTNAME
	270
	271
2835e518 JL	272	/*
	273	* Command line configuration.
	274	*/
	275	#include <config_cmd_default.h>
	276
	277	#define CONFIG_CMD_PING
	278	#define CONFIG_CMD_I2C
	279
de1d0a69	280	#if defined(CONFIG_PCI)
2835e518	281	#define CONFIG_CMD_PCI
de1d0a69	282	#endif
2835e518 JL	283
	284	#if defined(CFG_RAMBOOT) \|\| defined(CONFIG_RAM_AS_FLASH)
	285	#undef CONFIG_CMD_ENV
	286	#undef CONFIG_CMD_LOADS
de1d0a69 JL	287	#endif
de1d0a69 JL	288
b0e32949 LW	289
	290	#undef CONFIG_WATCHDOG /* watchdog disabled */
	291
	292	/*
	293	* Miscellaneous configurable options
	294	*/
	295	#define CFG_LONGHELP /* undef to save memory */
	296	#define CFG_LOAD_ADDR 0x2000000 /* default load address */
	297	#define CFG_PROMPT "MPC8540EVAL=> "/* Monitor Command Prompt */
2835e518	298	#if defined(CONFIG_CMD_KGDB)
b0e32949 LW	299	#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
	300	#else
	301	#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
	302	#endif
	303	#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
	304	#define CFG_MAXARGS 16 /* max number of command args */
	305	#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
	306	#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
	307
	308	/*
	309	* For booting Linux, the board info and command line data
	310	* have to be in the first 8 MB of memory, since this is
	311	* the maximum mapped by the Linux kernel during initialization.
	312	*/
	313	#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
	314
	315	/* Cache Configuration */
	316	#define CFG_DCACHE_SIZE 32768
	317	#define CFG_CACHELINE_SIZE 32
2835e518	318	#if defined(CONFIG_CMD_KGDB)
b0e32949 LW	319	#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
	320	#endif
	321
	322	/*
	323	* Internal Definitions
	324	*
	325	* Boot Flags
	326	*/
	327	#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
	328	#define BOOTFLAG_WARM 0x02 /* Software reboot */
	329
2835e518	330	#if defined(CONFIG_CMD_KGDB)
b0e32949 LW	331	#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
	332	#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
	333	#endif
	334
	335	/*****************************/
	336	/* Environment Configuration */
	337	/*****************************/
	338	/* The mac addresses for all ethernet interface */
	339	/* NOTE: change below for your network setting!!! */
	340	#if defined(CONFIG_TSEC_ENET)
	341	#define CONFIG_ETHADDR 00:01:af:07:9b:8a
	342	#define CONFIG_ETH1ADDR 00:01:af:07:9b:8b
	343	#define CONFIG_ETH2ADDR 00:01:af:07:9b:8c
	344	#endif
	345
	346	#define CONFIG_ROOTPATH /nfsroot
	347	#define CONFIG_BOOTFILE your.uImage
	348
	349	#define CONFIG_SERVERIP 192.168.101.1
	350	#define CONFIG_IPADDR 192.168.101.11
	351	#define CONFIG_GATEWAYIP 192.168.101.0
	352	#define CONFIG_NETMASK 255.255.255.0
	353
	354	#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */
	355
	356	#define CONFIG_HOSTNAME MPC8540EVAL
	357
	358	#endif /* __CONFIG_H */