[people/ms/u-boot.git] / include / configs / P1023RDB.h

/*
 * Copyright 2013 Freescale Semiconductor, Inc.
 *
 * Authors:  Roy Zang <tie-fei.zang@freescale.com>
 *	     Chunhe Lan <Chunhe.Lan@freescale.com>
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#ifndef CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_TEXT_BASE	0xeff80000
#endif

#ifndef CONFIG_SYS_MONITOR_BASE
#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE	/* start of monitor */
#endif

#ifndef CONFIG_RESET_VECTOR_ADDRESS
#define CONFIG_RESET_VECTOR_ADDRESS	0xeffffffc
#endif

/* High Level Configuration Options */
#define CONFIG_BOOKE		/* BOOKE */
#define CONFIG_E500		/* BOOKE e500 family */
#define CONFIG_MPC85xx
#define CONFIG_P1023
#define CONFIG_MP		/* support multiple processors */

#define CONFIG_FSL_ELBC		/* Has Enhanced localbus controller */
#define CONFIG_PCI		/* Enable PCI/PCIE */
#define CONFIG_PCI_INDIRECT_BRIDGE     /* indirect PCI bridge support */
#define CONFIG_PCIE1		/* PCIE controler 1 (slot 1) */
#define CONFIG_PCIE2		/* PCIE controler 2 (slot 2) */
#define CONFIG_PCIE3		/* PCIE controler 3 (slot 3) */
#define CONFIG_FSL_PCI_INIT	/* Use common FSL init code */
#define CONFIG_FSL_PCIE_RESET	/* need PCIe reset errata */
#define CONFIG_SYS_PCI_64BIT	/* enable 64-bit PCI resources */
#define CONFIG_FSL_LAW		/* Use common FSL init code */

#ifndef __ASSEMBLY__
extern unsigned long get_clock_freq(void);
#endif

#define CONFIG_SYS_CLK_FREQ	66666666
#define CONFIG_DDR_CLK_FREQ	CONFIG_SYS_CLK_FREQ

/*
 * These can be toggled for performance analysis, otherwise use default.
 */
#define CONFIG_L2_CACHE			/* toggle L2 cache */
#define CONFIG_BTB			/* toggle branch predition */
#define CONFIG_HWCONFIG

#define CONFIG_ENABLE_36BIT_PHYS

#define CONFIG_SYS_MEMTEST_START	0x01000000	/* memtest works on */
#define CONFIG_SYS_MEMTEST_END		0x02000000

#define CONFIG_PANIC_HANG	/* do not reset board on panic */

/* Implement conversion of addresses in the LBC */
#define CONFIG_SYS_LBC_LBCR		0x00000000
#define CONFIG_SYS_LBC_LCRR		LCRR_CLKDIV_8

/* DDR Setup */
#define CONFIG_VERY_BIG_RAM
#define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000
#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE

#define CONFIG_DIMM_SLOTS_PER_CTLR	1
#define CONFIG_CHIP_SELECTS_PER_CTRL	1

#define CONFIG_DDR_SPD
#define CONFIG_FSL_DDR3
#define CONFIG_FSL_DDR_INTERACTIVE
#define CONFIG_SYS_SDRAM_SIZE		512u	/* DDR is 512M */
#define CONFIG_SYS_SPD_BUS_NUM          0
#define SPD_EEPROM_ADDRESS              0x50
#define CONFIG_SYS_DDR_RAW_TIMING

/*
 * Memory map
 *
 * 0x0000_0000	0x1fff_ffff	DDR			512M cacheable
 * 0x8000_0000	0xbfff_ffff	PCI Express Mem		1G non-cacheable
 * 0xc000_0000	0xdfff_ffff	PCI			512M non-cacheable
 * 0xe100_0000	0xe3ff_ffff	PCI IO range		4M non-cacheable
 * 0xff00_0000	0xff3f_ffff	DPAA_QBMAN		4M cacheable
 * 0xff60_0000	0xff7f_ffff	CCSR			2M non-cacheable
 * 0xffd0_0000	0xffd0_3fff	L1 for stack		16K cacheable TLB0
 *
 * Localbus non-cacheable
 *
 * 0xec00_0000	0xefff_ffff	NOR flash		64M non-cacheable
 * 0xffa0_0000	0xffaf_ffff	NAND			1M non-cacheable
 */

/*
 * Local Bus Definitions
 */
#define CONFIG_SYS_FLASH_BASE		0xec000000 /* start of FLASH 64M */
#define CONFIG_SYS_FLASH_BASE_PHYS	CONFIG_SYS_FLASH_BASE

#define CONFIG_FLASH_BR_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \
				| BR_PS_16 | BR_V)
#define CONFIG_FLASH_OR_PRELIM	0xfc000ff7

#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_SYS_FLASH_EMPTY_INFO
#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* number of banks */
#define CONFIG_SYS_MAX_FLASH_SECT	512	/* sectors per device */
#define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */

#define CONFIG_BOARD_EARLY_INIT_F	/* call board_early_init_f function */
#define CONFIG_BOARD_EARLY_INIT_R	/* call board_early_init_r function */

#define CONFIG_SYS_INIT_RAM_LOCK
#define CONFIG_SYS_INIT_RAM_ADDR	0xffd00000	/* Initial L1 address */
#define CONFIG_SYS_INIT_RAM_SIZE	0x00004000/* Size of used area in RAM */
#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - \
					GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET

#define CONFIG_SYS_MONITOR_LEN	(512 * 1024)	  /* Reserve 512 kB for Mon */
#define CONFIG_SYS_MALLOC_LEN	(6 * 1024 * 1024) /* Reserved for malloc */

#define CONFIG_SYS_NAND_BASE		0xffa00000
#define CONFIG_SYS_NAND_BASE_PHYS	CONFIG_SYS_NAND_BASE

#define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
#define CONFIG_SYS_MAX_NAND_DEVICE	1
#define CONFIG_MTD_NAND_VERIFY_WRITE
#define CONFIG_CMD_NAND
#define CONFIG_NAND_FSL_ELBC
#define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)

/* NAND flash config */
#define CONFIG_SYS_NAND_BR_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
				| (2<<BR_DECC_SHIFT)	/* Use HW ECC */ \
				| BR_PS_8		/* Port Size = 8bit */ \
				| BR_MS_FCM		/* MSEL = FCM */ \
				| BR_V)			/* valid */
#define CONFIG_SYS_NAND_OR_PRELIM  (OR_AM_256KB		/* length 256K */ \
				| OR_FCM_PGS \
				| OR_FCM_CSCT \
				| OR_FCM_CST \
				| OR_FCM_CHT \
				| OR_FCM_SCY_1 \
				| OR_FCM_TRLX \
				| OR_FCM_EHTR)

#define CONFIG_SYS_BR0_PRELIM	CONFIG_FLASH_BR_PRELIM	/* NOR Base Address */
#define CONFIG_SYS_OR0_PRELIM	CONFIG_FLASH_OR_PRELIM	/* NOR Options */
#define CONFIG_SYS_BR1_PRELIM	CONFIG_SYS_NAND_BR_PRELIM
#define CONFIG_SYS_OR1_PRELIM	CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */

/* Serial Port */
#define CONFIG_CONS_INDEX		1
#undef	CONFIG_SERIAL_SOFTWARE_FIFO
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE	1
#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)

#define CONFIG_SYS_BAUDRATE_TABLE	\
	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}

#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CCSRBAR + 0x4500)
#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_CCSRBAR + 0x4600)

/* Use the HUSH parser */
#define CONFIG_SYS_HUSH_PARSER

/*
 * Pass open firmware flat tree
 */
#define CONFIG_OF_LIBFDT
#define CONFIG_OF_BOARD_SETUP
#define CONFIG_OF_STDOUT_VIA_ALIAS

/* new uImage format support */
#define CONFIG_FIT
#define CONFIG_FIT_VERBOSE	/* enable fit_format_{error,warning}() */

/* I2C */
#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
#define CONFIG_HARD_I2C		/* I2C with hardware support */
#define CONFIG_I2C_MULTI_BUS
#define CONFIG_SYS_I2C_SPEED	400000	/* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE		0x7F
#define CONFIG_SYS_I2C_OFFSET		0x3000
#define CONFIG_SYS_I2C2_OFFSET		0x3100

/*
 * I2C2 EEPROM
 */
#define CONFIG_ID_EEPROM
#ifdef CONFIG_ID_EEPROM
#define CONFIG_SYS_I2C_EEPROM_NXID
#endif
#define CONFIG_SYS_I2C_EEPROM_ADDR		0x50
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
#define CONFIG_SYS_EEPROM_BUS_NUM		0

#define CONFIG_CMD_I2C

/*
 * General PCI
 * Memory space is mapped 1-1, but I/O space must start from 0.
 */

/* controller 3, Slot 1, tgtid 3, Base address b000 */
#define CONFIG_SYS_PCIE3_NAME		"Slot 3"
#define CONFIG_SYS_PCIE3_MEM_VIRT	0x80000000
#define CONFIG_SYS_PCIE3_MEM_BUS	0x80000000
#define CONFIG_SYS_PCIE3_MEM_PHYS	0x80000000
#define CONFIG_SYS_PCIE3_MEM_SIZE	0x20000000	/* 512M */
#define CONFIG_SYS_PCIE3_IO_VIRT	0xffc00000
#define CONFIG_SYS_PCIE3_IO_BUS		0x00000000
#define CONFIG_SYS_PCIE3_IO_PHYS	0xffc00000
#define CONFIG_SYS_PCIE3_IO_SIZE	0x00010000	/* 64k */

/* controller 2, direct to uli, tgtid 2, Base address 9000 */
#define CONFIG_SYS_PCIE2_NAME		"Slot 2"
#define CONFIG_SYS_PCIE2_MEM_VIRT	0xa0000000
#define CONFIG_SYS_PCIE2_MEM_BUS	0xa0000000
#define CONFIG_SYS_PCIE2_MEM_PHYS	0xa0000000
#define CONFIG_SYS_PCIE2_MEM_SIZE	0x20000000	/* 512M */
#define CONFIG_SYS_PCIE2_IO_VIRT	0xffc10000
#define CONFIG_SYS_PCIE2_IO_BUS		0x00000000
#define CONFIG_SYS_PCIE2_IO_PHYS	0xffc10000
#define CONFIG_SYS_PCIE2_IO_SIZE	0x00010000	/* 64k */

/* controller 1, Slot 2, tgtid 1, Base address a000 */
#define CONFIG_SYS_PCIE1_NAME		"Slot 1"
#define CONFIG_SYS_PCIE1_MEM_VIRT	0xc0000000
#define CONFIG_SYS_PCIE1_MEM_BUS	0xc0000000
#define CONFIG_SYS_PCIE1_MEM_PHYS	0xc0000000
#define CONFIG_SYS_PCIE1_MEM_SIZE	0x20000000	/* 512M */
#define CONFIG_SYS_PCIE1_IO_VIRT	0xffc20000
#define CONFIG_SYS_PCIE1_IO_BUS		0x00000000
#define CONFIG_SYS_PCIE1_IO_PHYS	0xffc20000
#define CONFIG_SYS_PCIE1_IO_SIZE	0x00010000	/* 64k */

#if defined(CONFIG_PCI)
#define CONFIG_E1000		/* Defind e1000 pci Ethernet card */
#define CONFIG_PCI_PNP		/* do pci plug-and-play */
#define CONFIG_PCI_SCAN_SHOW	/* show pci devices on startup */
#endif	/* CONFIG_PCI */

/*
 * Environment
 */
#define CONFIG_ENV_OVERWRITE

#define CONFIG_ENV_IS_IN_FLASH
#if CONFIG_SYS_MONITOR_BASE > 0xfff80000
#define CONFIG_ENV_ADDR		0xfff80000
#else
#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
#endif
#define CONFIG_ENV_SIZE		0x2000
#define CONFIG_ENV_SECT_SIZE	0x20000 /* 128K (one sector) */

#define CONFIG_LOADS_ECHO		/* echo on for serial download */
#define CONFIG_SYS_LOADS_BAUD_CHANGE	/* allow baudrate change */

/*
 * Command line configuration.
 */
#include <config_cmd_default.h>

#define CONFIG_CMD_IRQ
#define CONFIG_CMD_PING
#define CONFIG_CMD_MII
#define CONFIG_CMD_SETEXPR
#define CONFIG_CMD_REGINFO

#if defined(CONFIG_PCI)
#define CONFIG_CMD_PCI
#define CONFIG_CMD_NET
#endif

/*
 * USB
 */
#define CONFIG_HAS_FSL_DR_USB
#ifdef CONFIG_HAS_FSL_DR_USB
#define CONFIG_USB_EHCI

#ifdef CONFIG_USB_EHCI
#define CONFIG_CMD_USB
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
#define CONFIG_USB_EHCI_FSL
#define CONFIG_USB_STORAGE
#define CONFIG_CMD_FAT
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_FAT
#define CONFIG_DOS_PARTITION
#endif
#endif

/*
 * Miscellaneous configurable options
 */
#define CONFIG_SYS_LONGHELP			/* undef to save memory	*/
#define CONFIG_CMDLINE_EDITING		/* Command-line editing */
#define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt */
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size */
#else
#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size */
#endif
/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT)+16)
#define CONFIG_SYS_MAXARGS	16		/* max number of command args */
/* Boot Argument Buffer Size */
#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
#define CONFIG_SYS_HZ	1000		/* decrementer freq: 1ms ticks */

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 64 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization.
 */
#define CONFIG_SYS_BOOTMAPSZ	(64 << 20)   /* Initial Memory map for Linux*/
#define CONFIG_SYS_BOOTM_LEN	(64 << 20)   /* Increase max gunzip size */

/*
 * Environment Configuration
 */
#define CONFIG_BOOTFILE		"uImage"
#define CONFIG_UBOOTPATH	(u-boot.bin) /* U-Boot image on TFTP server */

/* default location for tftp and bootm */
#define CONFIG_LOADADDR		1000000

#define CONFIG_BOOTDELAY -1	/* -1 disables auto-boot */

#define CONFIG_BAUDRATE	115200

/* Qman/Bman */
#define CONFIG_SYS_DPAA_QBMAN		/* support Q/Bman */
#define CONFIG_SYS_QMAN_MEM_BASE	0xff000000
#define CONFIG_SYS_QMAN_MEM_PHYS	CONFIG_SYS_QMAN_MEM_BASE
#define CONFIG_SYS_QMAN_MEM_SIZE	0x00200000
#define CONFIG_SYS_BMAN_MEM_BASE	0xff200000
#define CONFIG_SYS_BMAN_MEM_PHYS	CONFIG_SYS_BMAN_MEM_BASE
#define CONFIG_SYS_BMAN_MEM_SIZE	0x00200000

/* For FM */
#define CONFIG_SYS_DPAA_FMAN
#define CONFIG_PHY_GIGE		/* Include GbE speed/duplex detection */

#ifdef CONFIG_SYS_DPAA_FMAN
#define CONFIG_FMAN_ENET
#define CONFIG_PHY_ATHEROS
#endif

/* Default address of microcode for the Linux Fman driver */
/* QE microcode/firmware address */
#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
#define CONFIG_SYS_QE_FMAN_FW_ADDR	0xeff40000
#define CONFIG_SYS_QE_FMAN_FW_LENGTH	0x10000
#define CONFIG_SYS_FDT_PAD		(0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)

#ifdef CONFIG_FMAN_ENET
#define CONFIG_SYS_FM1_DTSEC1_PHY_ADDR	0x1
#define CONFIG_SYS_FM1_DTSEC2_PHY_ADDR	0x2

#define CONFIG_SYS_TBIPA_VALUE	8
#define CONFIG_MII		/* MII PHY management */
#define CONFIG_ETHPRIME		"FM1@DTSEC1"
#endif

#define CONFIG_EXTRA_ENV_SETTINGS	\
	"hwconfig=usb1:dr_mode=host,phy_type=ulpi\0"

#endif	/* __CONFIG_H */
Commit	Line	Data
57072338 CL	1	/*
	2	* Copyright 2013 Freescale Semiconductor, Inc.
	3	*
	4	* Authors: Roy Zang <tie-fei.zang@freescale.com>
	5	* Chunhe Lan <Chunhe.Lan@freescale.com>
	6	*
	7	* See file CREDITS for list of people who contributed to this
	8	* project.
	9	*
	10	* This program is free software; you can redistribute it and/or
	11	* modify it under the terms of the GNU General Public License as
	12	* published by the Free Software Foundation; either version 2 of
	13	* the License, or (at your option) any later version.
	14	*
	15	* This program is distributed in the hope that it will be useful,
	16	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	17	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	18	* GNU General Public License for more details.
	19	*
	20	* You should have received a copy of the GNU General Public License
	21	* along with this program; if not, write to the Free Software
	22	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	23	* MA 02111-1307 USA
	24	*/
	25
	26	#ifndef __CONFIG_H
	27	#define __CONFIG_H
	28
	29	#ifndef CONFIG_SYS_TEXT_BASE
	30	#define CONFIG_SYS_TEXT_BASE 0xeff80000
	31	#endif
	32
	33	#ifndef CONFIG_SYS_MONITOR_BASE
	34	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
	35	#endif
	36
	37	#ifndef CONFIG_RESET_VECTOR_ADDRESS
	38	#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc
	39	#endif
	40
	41	/* High Level Configuration Options */
	42	#define CONFIG_BOOKE /* BOOKE */
	43	#define CONFIG_E500 /* BOOKE e500 family */
	44	#define CONFIG_MPC85xx
	45	#define CONFIG_P1023
	46	#define CONFIG_MP /* support multiple processors */
	47
	48	#define CONFIG_FSL_ELBC /* Has Enhanced localbus controller */
	49	#define CONFIG_PCI /* Enable PCI/PCIE */
	50	#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
	51	#define CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */
	52	#define CONFIG_PCIE2 /* PCIE controler 2 (slot 2) */
	53	#define CONFIG_PCIE3 /* PCIE controler 3 (slot 3) */
	54	#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */
	55	#define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */
	56	#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */
	57	#define CONFIG_FSL_LAW /* Use common FSL init code */
	58
	59	#ifndef __ASSEMBLY__
	60	extern unsigned long get_clock_freq(void);
	61	#endif
	62
	63	#define CONFIG_SYS_CLK_FREQ 66666666
	64	#define CONFIG_DDR_CLK_FREQ CONFIG_SYS_CLK_FREQ
65
66	/*
67	* These can be toggled for performance analysis, otherwise use default.
68	*/
69	#define CONFIG_L2_CACHE /* toggle L2 cache */
70	#define CONFIG_BTB /* toggle branch predition */
71	#define CONFIG_HWCONFIG
72
73	#define CONFIG_ENABLE_36BIT_PHYS
74
75	#define CONFIG_SYS_MEMTEST_START 0x01000000 /* memtest works on */
76	#define CONFIG_SYS_MEMTEST_END 0x02000000
77
78	#define CONFIG_PANIC_HANG /* do not reset board on panic */
79
80	/* Implement conversion of addresses in the LBC */
81	#define CONFIG_SYS_LBC_LBCR 0x00000000
82	#define CONFIG_SYS_LBC_LCRR LCRR_CLKDIV_8
83
84	/* DDR Setup */
85	#define CONFIG_VERY_BIG_RAM
86	#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000
87	#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
88
89	#define CONFIG_DIMM_SLOTS_PER_CTLR 1
90	#define CONFIG_CHIP_SELECTS_PER_CTRL 1
91
92	#define CONFIG_DDR_SPD
93	#define CONFIG_FSL_DDR3
94	#define CONFIG_FSL_DDR_INTERACTIVE
95	#define CONFIG_SYS_SDRAM_SIZE 512u /* DDR is 512M */
96	#define CONFIG_SYS_SPD_BUS_NUM 0
97	#define SPD_EEPROM_ADDRESS 0x50
98	#define CONFIG_SYS_DDR_RAW_TIMING
99
100	/*
101	* Memory map
102	*
103	* 0x0000_0000 0x1fff_ffff DDR 512M cacheable
104	* 0x8000_0000 0xbfff_ffff PCI Express Mem 1G non-cacheable
105	* 0xc000_0000 0xdfff_ffff PCI 512M non-cacheable
106	* 0xe100_0000 0xe3ff_ffff PCI IO range 4M non-cacheable
107	* 0xff00_0000 0xff3f_ffff DPAA_QBMAN 4M cacheable
108	* 0xff60_0000 0xff7f_ffff CCSR 2M non-cacheable
109	* 0xffd0_0000 0xffd0_3fff L1 for stack 16K cacheable TLB0
110	*
111	* Localbus non-cacheable
112	*
113	* 0xec00_0000 0xefff_ffff NOR flash 64M non-cacheable
114	* 0xffa0_0000 0xffaf_ffff NAND 1M non-cacheable
115	*/
116
117	/*
118	* Local Bus Definitions
119	*/
120	#define CONFIG_SYS_FLASH_BASE 0xec000000 /* start of FLASH 64M */
121	#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE
122
123	#define CONFIG_FLASH_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \
124	\| BR_PS_16 \| BR_V)
125	#define CONFIG_FLASH_OR_PRELIM 0xfc000ff7
126
127	#define CONFIG_FLASH_CFI_DRIVER
128	#define CONFIG_SYS_FLASH_CFI
129	#define CONFIG_SYS_FLASH_EMPTY_INFO
130	#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
131	#define CONFIG_SYS_MAX_FLASH_SECT 512 /* sectors per device */
132	#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
133	#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
134
135	#define CONFIG_BOARD_EARLY_INIT_F /* call board_early_init_f function */
136	#define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */
137
138	#define CONFIG_SYS_INIT_RAM_LOCK
139	#define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */
140	#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000/* Size of used area in RAM */
141	#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
142	GENERATED_GBL_DATA_SIZE)
143	#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
144
145	#define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Mon */
146	#define CONFIG_SYS_MALLOC_LEN (6 * 1024 * 1024) /* Reserved for malloc */
147
148	#define CONFIG_SYS_NAND_BASE 0xffa00000
149	#define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE
150
151	#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE }
152	#define CONFIG_SYS_MAX_NAND_DEVICE 1
153	#define CONFIG_MTD_NAND_VERIFY_WRITE
154	#define CONFIG_CMD_NAND
155	#define CONFIG_NAND_FSL_ELBC
156	#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
157
158	/* NAND flash config */
159	#define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
160	\| (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
161	\| BR_PS_8 /* Port Size = 8bit */ \
162	\| BR_MS_FCM /* MSEL = FCM */ \
163	\| BR_V) /* valid */
164	#define CONFIG_SYS_NAND_OR_PRELIM (OR_AM_256KB /* length 256K */ \
165	\| OR_FCM_PGS \
166	\| OR_FCM_CSCT \
167	\| OR_FCM_CST \
168	\| OR_FCM_CHT \
169	\| OR_FCM_SCY_1 \
170	\| OR_FCM_TRLX \
171	\| OR_FCM_EHTR)
172
173	#define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */
174	#define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */
175	#define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM
176	#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
177
178	/* Serial Port */
179	#define CONFIG_CONS_INDEX 1
180	#undef CONFIG_SERIAL_SOFTWARE_FIFO
181	#define CONFIG_SYS_NS16550
182	#define CONFIG_SYS_NS16550_SERIAL
183	#define CONFIG_SYS_NS16550_REG_SIZE 1
184	#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
185
186	#define CONFIG_SYS_BAUDRATE_TABLE \
187	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
188
189	#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR + 0x4500)
190	#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR + 0x4600)
191
192	/* Use the HUSH parser */
193	#define CONFIG_SYS_HUSH_PARSER
194
195	/*
196	* Pass open firmware flat tree
197	*/
198	#define CONFIG_OF_LIBFDT
199	#define CONFIG_OF_BOARD_SETUP
200	#define CONFIG_OF_STDOUT_VIA_ALIAS
201
202	/* new uImage format support */
203	#define CONFIG_FIT
204	#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */
205
206	/* I2C */
207	#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
208	#define CONFIG_HARD_I2C /* I2C with hardware support */
209	#define CONFIG_I2C_MULTI_BUS
210	#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
211	#define CONFIG_SYS_I2C_SLAVE 0x7F
212	#define CONFIG_SYS_I2C_OFFSET 0x3000
213	#define CONFIG_SYS_I2C2_OFFSET 0x3100
214
215	/*
216	* I2C2 EEPROM
217	*/
218	#define CONFIG_ID_EEPROM
219	#ifdef CONFIG_ID_EEPROM
220	#define CONFIG_SYS_I2C_EEPROM_NXID
221	#endif
222	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
223	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
224	#define CONFIG_SYS_EEPROM_BUS_NUM 0
225
226	#define CONFIG_CMD_I2C
227
228	/*
229	* General PCI
230	* Memory space is mapped 1-1, but I/O space must start from 0.
231	*/
232
233	/* controller 3, Slot 1, tgtid 3, Base address b000 */
234	#define CONFIG_SYS_PCIE3_NAME "Slot 3"
235	#define CONFIG_SYS_PCIE3_MEM_VIRT 0x80000000
236	#define CONFIG_SYS_PCIE3_MEM_BUS 0x80000000
237	#define CONFIG_SYS_PCIE3_MEM_PHYS 0x80000000
238	#define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */
239	#define CONFIG_SYS_PCIE3_IO_VIRT 0xffc00000
240	#define CONFIG_SYS_PCIE3_IO_BUS 0x00000000
241	#define CONFIG_SYS_PCIE3_IO_PHYS 0xffc00000
242	#define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */
243
244	/* controller 2, direct to uli, tgtid 2, Base address 9000 */
245	#define CONFIG_SYS_PCIE2_NAME "Slot 2"
246	#define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000
247	#define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000
248	#define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000
249	#define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */
250	#define CONFIG_SYS_PCIE2_IO_VIRT 0xffc10000
251	#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000
252	#define CONFIG_SYS_PCIE2_IO_PHYS 0xffc10000
253	#define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */
254
255	/* controller 1, Slot 2, tgtid 1, Base address a000 */
256	#define CONFIG_SYS_PCIE1_NAME "Slot 1"
257	#define CONFIG_SYS_PCIE1_MEM_VIRT 0xc0000000
258	#define CONFIG_SYS_PCIE1_MEM_BUS 0xc0000000
259	#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc0000000
260	#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */
261	#define CONFIG_SYS_PCIE1_IO_VIRT 0xffc20000
262	#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000
263	#define CONFIG_SYS_PCIE1_IO_PHYS 0xffc20000
264	#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */
265
266	#if defined(CONFIG_PCI)
267	#define CONFIG_E1000 /* Defind e1000 pci Ethernet card */
268	#define CONFIG_PCI_PNP /* do pci plug-and-play */
269	#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
270	#endif /* CONFIG_PCI */
271
272	/*
273	* Environment
274	*/
275	#define CONFIG_ENV_OVERWRITE
276
277	#define CONFIG_ENV_IS_IN_FLASH
278	#if CONFIG_SYS_MONITOR_BASE > 0xfff80000
279	#define CONFIG_ENV_ADDR 0xfff80000
280	#else
281	#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
282	#endif
283	#define CONFIG_ENV_SIZE 0x2000
284	#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */
285
286	#define CONFIG_LOADS_ECHO /* echo on for serial download */
287	#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
288
289	/*
290	* Command line configuration.
291	*/
292	#include <config_cmd_default.h>
293
294	#define CONFIG_CMD_IRQ
295	#define CONFIG_CMD_PING
296	#define CONFIG_CMD_MII
297	#define CONFIG_CMD_SETEXPR
298	#define CONFIG_CMD_REGINFO
299
300	#if defined(CONFIG_PCI)
301	#define CONFIG_CMD_PCI
302	#define CONFIG_CMD_NET
303	#endif
304
305	/*
306	* USB
307	*/
308	#define CONFIG_HAS_FSL_DR_USB
309	#ifdef CONFIG_HAS_FSL_DR_USB
310	#define CONFIG_USB_EHCI
311
312	#ifdef CONFIG_USB_EHCI
313	#define CONFIG_CMD_USB
314	#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
315	#define CONFIG_USB_EHCI_FSL
316	#define CONFIG_USB_STORAGE
317	#define CONFIG_CMD_FAT
318	#define CONFIG_CMD_EXT2
319	#define CONFIG_CMD_FAT
320	#define CONFIG_DOS_PARTITION
321	#endif
322	#endif
323
324	/*
325	* Miscellaneous configurable options
326	*/
327	#define CONFIG_SYS_LONGHELP /* undef to save memory */
328	#define CONFIG_CMDLINE_EDITING /* Command-line editing */
329	#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
330	#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
331	#if defined(CONFIG_CMD_KGDB)
332	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
333	#else
334	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
335	#endif
336	/* Print Buffer Size */
337	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT)+16)
338	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
339	/* Boot Argument Buffer Size */
340	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
341	#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */
342
343	/*
344	* For booting Linux, the board info and command line data
345	* have to be in the first 64 MB of memory, since this is
346	* the maximum mapped by the Linux kernel during initialization.
347	*/
348	#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/
349	#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
350
351	/*
352	* Environment Configuration
353	*/
354	#define CONFIG_BOOTFILE "uImage"
355	#define CONFIG_UBOOTPATH (u-boot.bin) /* U-Boot image on TFTP server */
356
357	/* default location for tftp and bootm */
358	#define CONFIG_LOADADDR 1000000
359
360	#define CONFIG_BOOTDELAY -1 /* -1 disables auto-boot */
361
362	#define CONFIG_BAUDRATE 115200
363
364	/* Qman/Bman */
365	#define CONFIG_SYS_DPAA_QBMAN /* support Q/Bman */
366	#define CONFIG_SYS_QMAN_MEM_BASE 0xff000000
367	#define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE
368	#define CONFIG_SYS_QMAN_MEM_SIZE 0x00200000
369	#define CONFIG_SYS_BMAN_MEM_BASE 0xff200000
370	#define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE
371	#define CONFIG_SYS_BMAN_MEM_SIZE 0x00200000
372
373	/* For FM */
374	#define CONFIG_SYS_DPAA_FMAN
375	#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */
376
377	#ifdef CONFIG_SYS_DPAA_FMAN
378	#define CONFIG_FMAN_ENET
379	#define CONFIG_PHY_ATHEROS
380	#endif
381
382	/* Default address of microcode for the Linux Fman driver */
383	/* QE microcode/firmware address */
384	#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
385	#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xeff40000
386	#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000
387	#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
388
389	#ifdef CONFIG_FMAN_ENET
390	#define CONFIG_SYS_FM1_DTSEC1_PHY_ADDR 0x1
391	#define CONFIG_SYS_FM1_DTSEC2_PHY_ADDR 0x2
392
393	#define CONFIG_SYS_TBIPA_VALUE 8
394	#define CONFIG_MII /* MII PHY management */
395	#define CONFIG_ETHPRIME "FM1@DTSEC1"
396	#endif
397
398	#define CONFIG_EXTRA_ENV_SETTINGS \
399	"hwconfig=usb1:dr_mode=host,phy_type=ulpi\0"
400
401	#endif /* __CONFIG_H */