projects / people / ms / u-boot.git / blame
| Commit | Line | Data |
|---|---|---|
| aba80048 SL |
1 | /* |
| 2 | * Copyright 2014 Freescale Semiconductor, Inc. | |
| 3 | * | |
| 4 | * SPDX-License-Identifier: GPL-2.0+ | |
| 5 | */ | |
| 6 | ||
| 7 | /* | |
| 8 | * T1024/T1023 QDS board configuration file | |
| 9 | */ | |
| 10 | ||
| 11 | #ifndef __T1024QDS_H | |
| 12 | #define __T1024QDS_H | |
| 13 | ||
| 14 | /* High Level Configuration Options */ | |
| aba80048 SL |
15 | #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ |
| 16 | #define CONFIG_MP /* support multiple processors */ | |
| aba80048 SL |
17 | #define CONFIG_ENABLE_36BIT_PHYS |
| 18 | ||
| 19 | #ifdef CONFIG_PHYS_64BIT | |
| 20 | #define CONFIG_ADDR_MAP 1 | |
| 21 | #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ | |
| 22 | #endif | |
| 23 | ||
| 24 | #define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ | |
| 51370d56 | 25 | #define CONFIG_SYS_NUM_CPC CONFIG_SYS_NUM_DDR_CTLRS |
| aba80048 | 26 | |
| aba80048 SL |
27 | #define CONFIG_ENV_OVERWRITE |
| 28 | ||
| 29 | #define CONFIG_DEEP_SLEEP | |
| aba80048 | 30 | |
| ef6c55a2 AB |
31 | #define CONFIG_FSL_CAAM /* Enable SEC/CAAM */ |
| 32 | ||
| aba80048 SL |
33 | #ifdef CONFIG_RAMBOOT_PBL |
| 34 | #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t102xqds/t1024_pbi.cfg | |
| aba80048 SL |
35 | #define CONFIG_SPL_FLUSH_IMAGE |
| 36 | #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" | |
| aba80048 SL |
37 | #define CONFIG_SYS_TEXT_BASE 0x00201000 |
| 38 | #define CONFIG_SPL_TEXT_BASE 0xFFFD8000 | |
| 39 | #define CONFIG_SPL_PAD_TO 0x40000 | |
| 40 | #define CONFIG_SPL_MAX_SIZE 0x28000 | |
| 41 | #define RESET_VECTOR_OFFSET 0x27FFC | |
| 42 | #define BOOT_PAGE_OFFSET 0x27000 | |
| 43 | #ifdef CONFIG_SPL_BUILD | |
| 44 | #define CONFIG_SPL_SKIP_RELOCATE | |
| 45 | #define CONFIG_SPL_COMMON_INIT_DDR | |
| 46 | #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE | |
| aba80048 SL |
47 | #endif |
| 48 | ||
| 49 | #ifdef CONFIG_NAND | |
| aba80048 SL |
50 | #define CONFIG_SYS_NAND_U_BOOT_SIZE (768 << 10) |
| 51 | #define CONFIG_SYS_NAND_U_BOOT_DST 0x00200000 | |
| 52 | #define CONFIG_SYS_NAND_U_BOOT_START 0x00200000 | |
| 53 | #define CONFIG_SYS_NAND_U_BOOT_OFFS (256 << 10) | |
| 54 | #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" | |
| ec90ac73 | 55 | #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xqds/t1024_nand_rcw.cfg |
| aba80048 SL |
56 | #define CONFIG_SPL_NAND_BOOT |
| 57 | #endif | |
| 58 | ||
| 59 | #ifdef CONFIG_SPIFLASH | |
| 60 | #define CONFIG_RESET_VECTOR_ADDRESS 0x200FFC | |
| aba80048 SL |
61 | #define CONFIG_SPL_SPI_FLASH_MINIMAL |
| 62 | #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10) | |
| 63 | #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x00200000) | |
| 64 | #define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x00200000) | |
| 65 | #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (256 << 10) | |
| 66 | #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" | |
| 67 | #ifndef CONFIG_SPL_BUILD | |
| 68 | #define CONFIG_SYS_MPC85XX_NO_RESETVEC | |
| 69 | #endif | |
| ec90ac73 | 70 | #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xqds/t1024_spi_rcw.cfg |
| aba80048 SL |
71 | #define CONFIG_SPL_SPI_BOOT |
| 72 | #endif | |
| 73 | ||
| 74 | #ifdef CONFIG_SDCARD | |
| 75 | #define CONFIG_RESET_VECTOR_ADDRESS 0x200FFC | |
| aba80048 SL |
76 | #define CONFIG_SPL_MMC_MINIMAL |
| 77 | #define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10) | |
| 78 | #define CONFIG_SYS_MMC_U_BOOT_DST (0x00200000) | |
| 79 | #define CONFIG_SYS_MMC_U_BOOT_START (0x00200000) | |
| 80 | #define CONFIG_SYS_MMC_U_BOOT_OFFS (260 << 10) | |
| 81 | #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" | |
| 82 | #ifndef CONFIG_SPL_BUILD | |
| 83 | #define CONFIG_SYS_MPC85XX_NO_RESETVEC | |
| 84 | #endif | |
| ec90ac73 | 85 | #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xqds/t1024_sd_rcw.cfg |
| aba80048 SL |
86 | #define CONFIG_SPL_MMC_BOOT |
| 87 | #endif | |
| 88 | ||
| 89 | #endif /* CONFIG_RAMBOOT_PBL */ | |
| 90 | ||
| 91 | #ifndef CONFIG_SYS_TEXT_BASE | |
| 92 | #define CONFIG_SYS_TEXT_BASE 0xeff40000 | |
| 93 | #endif | |
| 94 | ||
| 95 | #ifndef CONFIG_RESET_VECTOR_ADDRESS | |
| 96 | #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc | |
| 97 | #endif | |
| 98 | ||
| e856bdcf | 99 | #ifdef CONFIG_MTD_NOR_FLASH |
| aba80048 SL |
100 | #define CONFIG_FLASH_CFI_DRIVER |
| 101 | #define CONFIG_SYS_FLASH_CFI | |
| 102 | #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE | |
| 103 | #endif | |
| 104 | ||
| 105 | /* PCIe Boot - Master */ | |
| 106 | #define CONFIG_SRIO_PCIE_BOOT_MASTER | |
| 107 | /* | |
| 108 | * for slave u-boot IMAGE instored in master memory space, | |
| 109 | * PHYS must be aligned based on the SIZE | |
| 110 | */ | |
| 111 | #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull | |
| 112 | #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000 /* 1M */ | |
| 113 | #ifdef CONFIG_PHYS_64BIT | |
| 114 | #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull | |
| 115 | #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull | |
| 116 | #else | |
| 117 | #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xef200000 | |
| 118 | #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0xfff00000 | |
| 119 | #endif | |
| 120 | /* | |
| 121 | * for slave UCODE and ENV instored in master memory space, | |
| 122 | * PHYS must be aligned based on the SIZE | |
| 123 | */ | |
| 124 | #ifdef CONFIG_PHYS_64BIT | |
| 125 | #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull | |
| 126 | #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull | |
| 127 | #else | |
| 128 | #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xef100000 | |
| 129 | #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0xffe00000 | |
| 130 | #endif | |
| 131 | #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000 /* 256K */ | |
| 132 | /* slave core release by master*/ | |
| 133 | #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4 | |
| 134 | #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */ | |
| 135 | ||
| 136 | /* PCIe Boot - Slave */ | |
| 137 | #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE | |
| 138 | #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000 | |
| 139 | #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \ | |
| 140 | (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR) | |
| 141 | /* Set 1M boot space for PCIe boot */ | |
| 142 | #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000) | |
| 143 | #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \ | |
| 144 | (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR) | |
| 145 | #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc | |
| aba80048 SL |
146 | #endif |
| 147 | ||
| 148 | #if defined(CONFIG_SPIFLASH) | |
| 149 | #define CONFIG_SYS_EXTRA_ENV_RELOC | |
| 150 | #define CONFIG_ENV_IS_IN_SPI_FLASH | |
| 151 | #define CONFIG_ENV_SPI_BUS 0 | |
| 152 | #define CONFIG_ENV_SPI_CS 0 | |
| 153 | #define CONFIG_ENV_SPI_MAX_HZ 10000000 | |
| 154 | #define CONFIG_ENV_SPI_MODE 0 | |
| 155 | #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ | |
| 156 | #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ | |
| 157 | #define CONFIG_ENV_SECT_SIZE 0x10000 | |
| 158 | #elif defined(CONFIG_SDCARD) | |
| 159 | #define CONFIG_SYS_EXTRA_ENV_RELOC | |
| 160 | #define CONFIG_ENV_IS_IN_MMC | |
| 161 | #define CONFIG_SYS_MMC_ENV_DEV 0 | |
| 162 | #define CONFIG_ENV_SIZE 0x2000 | |
| 163 | #define CONFIG_ENV_OFFSET (512 * 0x800) | |
| 164 | #elif defined(CONFIG_NAND) | |
| 165 | #define CONFIG_SYS_EXTRA_ENV_RELOC | |
| 166 | #define CONFIG_ENV_IS_IN_NAND | |
| 167 | #define CONFIG_ENV_SIZE 0x2000 | |
| 168 | #define CONFIG_ENV_OFFSET (10 * CONFIG_SYS_NAND_BLOCK_SIZE) | |
| 169 | #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) | |
| 170 | #define CONFIG_ENV_IS_IN_REMOTE | |
| 171 | #define CONFIG_ENV_ADDR 0xffe20000 | |
| 172 | #define CONFIG_ENV_SIZE 0x2000 | |
| 173 | #elif defined(CONFIG_ENV_IS_NOWHERE) | |
| 174 | #define CONFIG_ENV_SIZE 0x2000 | |
| 175 | #else | |
| 176 | #define CONFIG_ENV_IS_IN_FLASH | |
| 177 | #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) | |
| 178 | #define CONFIG_ENV_SIZE 0x2000 | |
| 179 | #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ | |
| 180 | #endif | |
| 181 | ||
| aba80048 SL |
182 | #ifndef __ASSEMBLY__ |
| 183 | unsigned long get_board_sys_clk(void); | |
| 184 | unsigned long get_board_ddr_clk(void); | |
| 185 | #endif | |
| 186 | ||
| 187 | #define CONFIG_SYS_CLK_FREQ get_board_sys_clk() | |
| 188 | #define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() | |
| 189 | ||
| 190 | /* | |
| 191 | * These can be toggled for performance analysis, otherwise use default. | |
| 192 | */ | |
| 193 | #define CONFIG_SYS_CACHE_STASHING | |
| 194 | #define CONFIG_BACKSIDE_L2_CACHE | |
| 195 | #define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E | |
| 196 | #define CONFIG_BTB /* toggle branch predition */ | |
| 197 | #define CONFIG_DDR_ECC | |
| 198 | #ifdef CONFIG_DDR_ECC | |
| 199 | #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER | |
| 200 | #define CONFIG_MEM_INIT_VALUE 0xdeadbeef | |
| 201 | #endif | |
| 202 | ||
| 203 | #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ | |
| 204 | #define CONFIG_SYS_MEMTEST_END 0x00400000 | |
| 205 | #define CONFIG_SYS_ALT_MEMTEST | |
| 206 | #define CONFIG_PANIC_HANG /* do not reset board on panic */ | |
| 207 | ||
| 208 | /* | |
| 209 | * Config the L3 Cache as L3 SRAM | |
| 210 | */ | |
| 211 | #define CONFIG_SYS_INIT_L3_ADDR 0xFFFC0000 | |
| 212 | #define CONFIG_SYS_L3_SIZE (256 << 10) | |
| 213 | #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024) | |
| 214 | #ifdef CONFIG_RAMBOOT_PBL | |
| 215 | #define CONFIG_ENV_ADDR (CONFIG_SPL_GD_ADDR + 4 * 1024) | |
| 216 | #endif | |
| 217 | #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SPL_GD_ADDR + 12 * 1024) | |
| 218 | #define CONFIG_SPL_RELOC_MALLOC_SIZE (30 << 10) | |
| 219 | #define CONFIG_SPL_RELOC_STACK (CONFIG_SPL_GD_ADDR + 64 * 1024) | |
| 220 | #define CONFIG_SPL_RELOC_STACK_SIZE (22 << 10) | |
| 221 | ||
| 222 | #ifdef CONFIG_PHYS_64BIT | |
| 223 | #define CONFIG_SYS_DCSRBAR 0xf0000000 | |
| 224 | #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull | |
| 225 | #endif | |
| 226 | ||
| 227 | /* EEPROM */ | |
| 228 | #define CONFIG_ID_EEPROM | |
| 229 | #define CONFIG_SYS_I2C_EEPROM_NXID | |
| 230 | #define CONFIG_SYS_EEPROM_BUS_NUM 0 | |
| 231 | #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 | |
| 232 | #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 | |
| 233 | #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 | |
| 234 | #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 | |
| 235 | ||
| 236 | /* | |
| 237 | * DDR Setup | |
| 238 | */ | |
| 239 | #define CONFIG_VERY_BIG_RAM | |
| 240 | #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 | |
| 241 | #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE | |
| 242 | #define CONFIG_DIMM_SLOTS_PER_CTLR 1 | |
| 243 | #define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR) | |
| 244 | #define CONFIG_DDR_SPD | |
| aba80048 SL |
245 | |
| 246 | #define CONFIG_SYS_SPD_BUS_NUM 0 | |
| 247 | #define SPD_EEPROM_ADDRESS 0x51 | |
| 248 | ||
| 249 | #define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ | |
| 250 | ||
| 251 | /* | |
| 252 | * IFC Definitions | |
| 253 | */ | |
| 254 | #define CONFIG_SYS_FLASH_BASE 0xe0000000 | |
| 255 | #ifdef CONFIG_PHYS_64BIT | |
| 256 | #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) | |
| 257 | #else | |
| 258 | #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE | |
| 259 | #endif | |
| 260 | ||
| 261 | #define CONFIG_SYS_NOR0_CSPR_EXT (0xf) | |
| 262 | #define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \ | |
| 263 | + 0x8000000) | \ | |
| 264 | CSPR_PORT_SIZE_16 | \ | |
| 265 | CSPR_MSEL_NOR | \ | |
| 266 | CSPR_V) | |
| 267 | #define CONFIG_SYS_NOR1_CSPR_EXT (0xf) | |
| 268 | #define CONFIG_SYS_NOR1_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ | |
| 269 | CSPR_PORT_SIZE_16 | \ | |
| 270 | CSPR_MSEL_NOR | \ | |
| 271 | CSPR_V) | |
| 272 | #define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) | |
| 273 | /* NOR Flash Timing Params */ | |
| 274 | #define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80 | |
| 275 | #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ | |
| 276 | FTIM0_NOR_TEADC(0x5) | \ | |
| 277 | FTIM0_NOR_TEAHC(0x5)) | |
| 278 | #define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ | |
| 279 | FTIM1_NOR_TRAD_NOR(0x1A) |\ | |
| 280 | FTIM1_NOR_TSEQRAD_NOR(0x13)) | |
| 281 | #define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ | |
| 282 | FTIM2_NOR_TCH(0x4) | \ | |
| 283 | FTIM2_NOR_TWPH(0x0E) | \ | |
| 284 | FTIM2_NOR_TWP(0x1c)) | |
| 285 | #define CONFIG_SYS_NOR_FTIM3 0x0 | |
| 286 | ||
| 287 | #define CONFIG_SYS_FLASH_QUIET_TEST | |
| 288 | #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ | |
| 289 | ||
| 290 | #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ | |
| 291 | #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ | |
| 292 | #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ | |
| 293 | #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ | |
| 294 | ||
| 295 | #define CONFIG_SYS_FLASH_EMPTY_INFO | |
| 296 | #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS \ | |
| 297 | + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS} | |
| 298 | #define CONFIG_FSL_QIXIS /* use common QIXIS code */ | |
| 299 | #define QIXIS_BASE 0xffdf0000 | |
| 300 | #ifdef CONFIG_PHYS_64BIT | |
| 301 | #define QIXIS_BASE_PHYS (0xf00000000ull | QIXIS_BASE) | |
| 302 | #else | |
| 303 | #define QIXIS_BASE_PHYS QIXIS_BASE | |
| 304 | #endif | |
| 305 | #define QIXIS_LBMAP_SWITCH 0x06 | |
| 306 | #define QIXIS_LBMAP_MASK 0x0f | |
| 307 | #define QIXIS_LBMAP_SHIFT 0 | |
| 308 | #define QIXIS_LBMAP_DFLTBANK 0x00 | |
| 309 | #define QIXIS_LBMAP_ALTBANK 0x04 | |
| 310 | #define QIXIS_RST_CTL_RESET 0x31 | |
| 311 | #define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20 | |
| 312 | #define QIXIS_RCFG_CTL_RECONFIG_START 0x21 | |
| 313 | #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 | |
| 314 | #define QIXIS_RST_FORCE_MEM 0x01 | |
| 315 | ||
| 316 | #define CONFIG_SYS_CSPR3_EXT (0xf) | |
| 317 | #define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \ | |
| 318 | | CSPR_PORT_SIZE_8 \ | |
| 319 | | CSPR_MSEL_GPCM \ | |
| 320 | | CSPR_V) | |
| 321 | #define CONFIG_SYS_AMASK3 IFC_AMASK(4*1024) | |
| 322 | #define CONFIG_SYS_CSOR3 0x0 | |
| 323 | /* QIXIS Timing parameters for IFC CS3 */ | |
| 324 | #define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ | |
| 325 | FTIM0_GPCM_TEADC(0x0e) | \ | |
| 326 | FTIM0_GPCM_TEAHC(0x0e)) | |
| 327 | #define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0xff) | \ | |
| 328 | FTIM1_GPCM_TRAD(0x3f)) | |
| 329 | #define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ | |
| 330 | FTIM2_GPCM_TCH(0x8) | \ | |
| 331 | FTIM2_GPCM_TWP(0x1f)) | |
| 332 | #define CONFIG_SYS_CS3_FTIM3 0x0 | |
| 333 | ||
| 334 | #define CONFIG_NAND_FSL_IFC | |
| 335 | #define CONFIG_SYS_NAND_BASE 0xff800000 | |
| 336 | #ifdef CONFIG_PHYS_64BIT | |
| 337 | #define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE) | |
| 338 | #else | |
| 339 | #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE | |
| 340 | #endif | |
| 341 | #define CONFIG_SYS_NAND_CSPR_EXT (0xf) | |
| 342 | #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ | |
| 343 | | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ | |
| 344 | | CSPR_MSEL_NAND /* MSEL = NAND */ \ | |
| 345 | | CSPR_V) | |
| 346 | #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) | |
| 347 | ||
| 348 | #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ | |
| 349 | | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ | |
| 350 | | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ | |
| 351 | | CSOR_NAND_RAL_3 /* RAL = 3Byes */ \ | |
| 352 | | CSOR_NAND_PGS_2K /* Page Size = 2K */ \ | |
| 353 | | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \ | |
| 354 | | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ | |
| 355 | ||
| 356 | #define CONFIG_SYS_NAND_ONFI_DETECTION | |
| 357 | ||
| 358 | /* ONFI NAND Flash mode0 Timing Params */ | |
| 359 | #define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \ | |
| 360 | FTIM0_NAND_TWP(0x18) | \ | |
| 361 | FTIM0_NAND_TWCHT(0x07) | \ | |
| 362 | FTIM0_NAND_TWH(0x0a)) | |
| 363 | #define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ | |
| 364 | FTIM1_NAND_TWBE(0x39) | \ | |
| 365 | FTIM1_NAND_TRR(0x0e) | \ | |
| 366 | FTIM1_NAND_TRP(0x18)) | |
| 367 | #define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ | |
| 368 | FTIM2_NAND_TREH(0x0a) | \ | |
| 369 | FTIM2_NAND_TWHRE(0x1e)) | |
| 370 | #define CONFIG_SYS_NAND_FTIM3 0x0 | |
| 371 | ||
| 372 | #define CONFIG_SYS_NAND_DDR_LAW 11 | |
| 373 | #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } | |
| 374 | #define CONFIG_SYS_MAX_NAND_DEVICE 1 | |
| aba80048 SL |
375 | #define CONFIG_CMD_NAND |
| 376 | ||
| 377 | #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) | |
| 378 | ||
| 379 | #if defined(CONFIG_NAND) | |
| 380 | #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT | |
| 381 | #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR | |
| 382 | #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK | |
| 383 | #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR | |
| 384 | #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 | |
| 385 | #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 | |
| 386 | #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 | |
| 387 | #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 | |
| 388 | #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR0_CSPR_EXT | |
| 389 | #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR0_CSPR | |
| 390 | #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK | |
| 391 | #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR | |
| 392 | #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 | |
| 393 | #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 | |
| 394 | #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 | |
| 395 | #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 | |
| 396 | #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR1_CSPR_EXT | |
| 397 | #define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR1_CSPR | |
| 398 | #define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK | |
| 399 | #define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR | |
| 400 | #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0 | |
| 401 | #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1 | |
| 402 | #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2 | |
| 403 | #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3 | |
| 404 | #else | |
| 405 | #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT | |
| 406 | #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR | |
| 407 | #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK | |
| 408 | #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR | |
| 409 | #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 | |
| 410 | #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 | |
| 411 | #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 | |
| 412 | #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 | |
| 413 | #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR1_CSPR_EXT | |
| 414 | #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR1_CSPR | |
| 415 | #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK | |
| 416 | #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR | |
| 417 | #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 | |
| 418 | #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 | |
| 419 | #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 | |
| 420 | #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 | |
| 421 | #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NAND_CSPR_EXT | |
| 422 | #define CONFIG_SYS_CSPR2 CONFIG_SYS_NAND_CSPR | |
| 423 | #define CONFIG_SYS_AMASK2 CONFIG_SYS_NAND_AMASK | |
| 424 | #define CONFIG_SYS_CSOR2 CONFIG_SYS_NAND_CSOR | |
| 425 | #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NAND_FTIM0 | |
| 426 | #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NAND_FTIM1 | |
| 427 | #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NAND_FTIM2 | |
| 428 | #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NAND_FTIM3 | |
| 429 | #endif | |
| 430 | ||
| 431 | #ifdef CONFIG_SPL_BUILD | |
| 432 | #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE | |
| 433 | #else | |
| 434 | #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE | |
| 435 | #endif | |
| 436 | ||
| 437 | #if defined(CONFIG_RAMBOOT_PBL) | |
| 438 | #define CONFIG_SYS_RAMBOOT | |
| 439 | #endif | |
| 440 | ||
| 441 | #define CONFIG_BOARD_EARLY_INIT_R | |
| 442 | #define CONFIG_MISC_INIT_R | |
| 443 | ||
| 444 | #define CONFIG_HWCONFIG | |
| 445 | ||
| 446 | /* define to use L1 as initial stack */ | |
| 447 | #define CONFIG_L1_INIT_RAM | |
| 448 | #define CONFIG_SYS_INIT_RAM_LOCK | |
| 449 | #define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ | |
| 450 | #ifdef CONFIG_PHYS_64BIT | |
| 451 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf | |
| b3142e2c | 452 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe03c000 |
| aba80048 SL |
453 | /* The assembler doesn't like typecast */ |
| 454 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ | |
| 455 | ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ | |
| 456 | CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) | |
| 457 | #else | |
| b3142e2c | 458 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS 0xfe03c000 /* Initial L1 address */ |
| aba80048 SL |
459 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 |
| 460 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS | |
| 461 | #endif | |
| 462 | #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 | |
| 463 | ||
| 464 | #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ | |
| 465 | GENERATED_GBL_DATA_SIZE) | |
| 466 | #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET | |
| 467 | ||
| 468 | #define CONFIG_SYS_MONITOR_LEN (768 * 1024) | |
| 469 | #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) | |
| 470 | ||
| 471 | /* Serial Port */ | |
| 472 | #define CONFIG_CONS_INDEX 1 | |
| aba80048 SL |
473 | #define CONFIG_SYS_NS16550_SERIAL |
| 474 | #define CONFIG_SYS_NS16550_REG_SIZE 1 | |
| 475 | #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) | |
| 476 | ||
| 477 | #define CONFIG_SYS_BAUDRATE_TABLE \ | |
| 478 | {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} | |
| 479 | ||
| 480 | #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) | |
| 481 | #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) | |
| 482 | #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) | |
| 483 | #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) | |
| aba80048 | 484 | |
| aba80048 | 485 | /* Video */ |
| e5d5f5a8 | 486 | #ifdef CONFIG_ARCH_T1024 /* no DIU on T1023 */ |
| aba80048 SL |
487 | #define CONFIG_FSL_DIU_FB |
| 488 | #ifdef CONFIG_FSL_DIU_FB | |
| 489 | #define CONFIG_FSL_DIU_CH7301 | |
| 490 | #define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR + 0x180000) | |
| aba80048 | 491 | #define CONFIG_CMD_BMP |
| aba80048 SL |
492 | #define CONFIG_VIDEO_LOGO |
| 493 | #define CONFIG_VIDEO_BMP_LOGO | |
| 494 | #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS | |
| 495 | /* | |
| 496 | * With CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS, flash I/O is really slow, so | |
| 497 | * disable empty flash sector detection, which is I/O-intensive. | |
| 498 | */ | |
| 499 | #undef CONFIG_SYS_FLASH_EMPTY_INFO | |
| 500 | #endif | |
| 501 | #endif | |
| 502 | ||
| aba80048 SL |
503 | /* I2C */ |
| 504 | #define CONFIG_SYS_I2C | |
| 505 | #define CONFIG_SYS_I2C_FSL /* Use FSL common I2C driver */ | |
| 506 | #define CONFIG_SYS_FSL_I2C_SPEED 50000 /* I2C speed in Hz */ | |
| 507 | #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F | |
| 508 | #define CONFIG_SYS_FSL_I2C2_SPEED 50000 /* I2C speed in Hz */ | |
| 509 | #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F | |
| 510 | #define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 | |
| 511 | #define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100 | |
| 512 | ||
| 513 | #define I2C_MUX_PCA_ADDR 0x77 | |
| 514 | #define I2C_MUX_PCA_ADDR_PRI 0x77 /* Primary Mux*/ | |
| 10227aaa SL |
515 | #define I2C_MUX_PCA_ADDR_SEC 0x76 /* Secondary multiplexer */ |
| 516 | #define I2C_RETIMER_ADDR 0x18 | |
| aba80048 SL |
517 | |
| 518 | /* I2C bus multiplexer */ | |
| 519 | #define I2C_MUX_CH_DEFAULT 0x8 | |
| 520 | #define I2C_MUX_CH_DIU 0xC | |
| 10227aaa SL |
521 | #define I2C_MUX_CH5 0xD |
| 522 | #define I2C_MUX_CH7 0xF | |
| aba80048 SL |
523 | |
| 524 | /* LDI/DVI Encoder for display */ | |
| 525 | #define CONFIG_SYS_I2C_LDI_ADDR 0x38 | |
| 526 | #define CONFIG_SYS_I2C_DVI_ADDR 0x75 | |
| 527 | ||
| 528 | /* | |
| 529 | * RTC configuration | |
| 530 | */ | |
| 531 | #define RTC | |
| 532 | #define CONFIG_RTC_DS3231 1 | |
| 533 | #define CONFIG_SYS_I2C_RTC_ADDR 0x68 | |
| 534 | ||
| 535 | /* | |
| 536 | * eSPI - Enhanced SPI | |
| 537 | */ | |
| aba80048 | 538 | #ifndef CONFIG_SPL_BUILD |
| aba80048 | 539 | #endif |
| aba80048 SL |
540 | #define CONFIG_SPI_FLASH_BAR |
| 541 | #define CONFIG_SF_DEFAULT_SPEED 10000000 | |
| 542 | #define CONFIG_SF_DEFAULT_MODE 0 | |
| 543 | ||
| 544 | /* | |
| 545 | * General PCIe | |
| 546 | * Memory space is mapped 1-1, but I/O space must start from 0. | |
| 547 | */ | |
| b38eaec5 RD |
548 | #define CONFIG_PCIE1 /* PCIE controller 1 */ |
| 549 | #define CONFIG_PCIE2 /* PCIE controller 2 */ | |
| 550 | #define CONFIG_PCIE3 /* PCIE controller 3 */ | |
| aba80048 SL |
551 | #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ |
| 552 | #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ | |
| 553 | #define CONFIG_PCI_INDIRECT_BRIDGE | |
| 554 | ||
| 555 | #ifdef CONFIG_PCI | |
| 556 | /* controller 1, direct to uli, tgtid 3, Base address 20000 */ | |
| 557 | #ifdef CONFIG_PCIE1 | |
| 558 | #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 | |
| 559 | #ifdef CONFIG_PHYS_64BIT | |
| 560 | #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 | |
| 561 | #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull | |
| 562 | #else | |
| 563 | #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 | |
| 564 | #define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 | |
| 565 | #endif | |
| 566 | #define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000 /* 256M */ | |
| 567 | #define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 | |
| 568 | #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 | |
| 569 | #ifdef CONFIG_PHYS_64BIT | |
| 570 | #define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull | |
| 571 | #else | |
| 572 | #define CONFIG_SYS_PCIE1_IO_PHYS 0xf8000000 | |
| 573 | #endif | |
| 574 | #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ | |
| 575 | #endif | |
| 576 | ||
| 577 | /* controller 2, Slot 2, tgtid 2, Base address 201000 */ | |
| 578 | #ifdef CONFIG_PCIE2 | |
| 579 | #define CONFIG_SYS_PCIE2_MEM_VIRT 0x90000000 | |
| 580 | #ifdef CONFIG_PHYS_64BIT | |
| 581 | #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 | |
| 582 | #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc10000000ull | |
| 583 | #else | |
| 584 | #define CONFIG_SYS_PCIE2_MEM_BUS 0x90000000 | |
| 585 | #define CONFIG_SYS_PCIE2_MEM_PHYS 0x90000000 | |
| 586 | #endif | |
| 587 | #define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000 /* 256M */ | |
| 588 | #define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 | |
| 589 | #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 | |
| 590 | #ifdef CONFIG_PHYS_64BIT | |
| 591 | #define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull | |
| 592 | #else | |
| 593 | #define CONFIG_SYS_PCIE2_IO_PHYS 0xf8010000 | |
| 594 | #endif | |
| 595 | #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ | |
| 596 | #endif | |
| 597 | ||
| 598 | /* controller 3, Slot 1, tgtid 1, Base address 202000 */ | |
| 599 | #ifdef CONFIG_PCIE3 | |
| 600 | #define CONFIG_SYS_PCIE3_MEM_VIRT 0xa0000000 | |
| 601 | #ifdef CONFIG_PHYS_64BIT | |
| 602 | #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 | |
| 603 | #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc20000000ull | |
| 604 | #else | |
| 605 | #define CONFIG_SYS_PCIE3_MEM_BUS 0xa0000000 | |
| 606 | #define CONFIG_SYS_PCIE3_MEM_PHYS 0xa0000000 | |
| 607 | #endif | |
| 608 | #define CONFIG_SYS_PCIE3_MEM_SIZE 0x10000000 /* 256M */ | |
| 609 | #define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 | |
| 610 | #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 | |
| 611 | #ifdef CONFIG_PHYS_64BIT | |
| 612 | #define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull | |
| 613 | #else | |
| 614 | #define CONFIG_SYS_PCIE3_IO_PHYS 0xf8020000 | |
| 615 | #endif | |
| 616 | #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ | |
| 617 | #endif | |
| 618 | ||
| aba80048 | 619 | #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ |
| aba80048 SL |
620 | #endif /* CONFIG_PCI */ |
| 621 | ||
| 622 | /* | |
| 623 | *SATA | |
| 624 | */ | |
| 625 | #define CONFIG_FSL_SATA_V2 | |
| 626 | #ifdef CONFIG_FSL_SATA_V2 | |
| 627 | #define CONFIG_LIBATA | |
| 628 | #define CONFIG_FSL_SATA | |
| 629 | #define CONFIG_SYS_SATA_MAX_DEVICE 1 | |
| 630 | #define CONFIG_SATA1 | |
| 631 | #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR | |
| 632 | #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA | |
| 633 | #define CONFIG_LBA48 | |
| 634 | #define CONFIG_CMD_SATA | |
| aba80048 SL |
635 | #endif |
| 636 | ||
| 637 | /* | |
| 638 | * USB | |
| 639 | */ | |
| 640 | #define CONFIG_HAS_FSL_DR_USB | |
| 641 | ||
| 642 | #ifdef CONFIG_HAS_FSL_DR_USB | |
| 643 | #define CONFIG_USB_EHCI | |
| aba80048 SL |
644 | #define CONFIG_USB_EHCI_FSL |
| 645 | #define CONFIG_EHCI_HCD_INIT_AFTER_RESET | |
| aba80048 SL |
646 | #endif |
| 647 | ||
| 648 | /* | |
| 649 | * SDHC | |
| 650 | */ | |
| aba80048 SL |
651 | #ifdef CONFIG_MMC |
| 652 | #define CONFIG_FSL_ESDHC | |
| 653 | #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR | |
| aba80048 SL |
654 | #endif |
| 655 | ||
| 656 | /* Qman/Bman */ | |
| 657 | #ifndef CONFIG_NOBQFMAN | |
| 658 | #define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ | |
| 2a8b3422 | 659 | #define CONFIG_SYS_BMAN_NUM_PORTALS 10 |
| aba80048 SL |
660 | #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 |
| 661 | #ifdef CONFIG_PHYS_64BIT | |
| 662 | #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull | |
| 663 | #else | |
| 664 | #define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE | |
| 665 | #endif | |
| 666 | #define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 | |
| 3fa66db4 JL |
667 | #define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000 |
| 668 | #define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 | |
| 669 | #define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE | |
| 670 | #define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) | |
| 671 | #define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ | |
| 672 | CONFIG_SYS_BMAN_CENA_SIZE) | |
| 673 | #define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) | |
| 674 | #define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 | |
| 2a8b3422 | 675 | #define CONFIG_SYS_QMAN_NUM_PORTALS 10 |
| aba80048 SL |
676 | #define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 |
| 677 | #ifdef CONFIG_PHYS_64BIT | |
| 678 | #define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull | |
| 679 | #else | |
| 680 | #define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE | |
| 681 | #endif | |
| 682 | #define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 | |
| 3fa66db4 JL |
683 | #define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000 |
| 684 | #define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 | |
| 685 | #define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE | |
| 686 | #define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) | |
| 687 | #define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ | |
| 688 | CONFIG_SYS_QMAN_CENA_SIZE) | |
| 689 | #define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) | |
| 690 | #define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 | |
| aba80048 SL |
691 | |
| 692 | #define CONFIG_SYS_DPAA_FMAN | |
| 693 | ||
| 694 | #define CONFIG_QE | |
| 695 | #define CONFIG_U_QE | |
| 696 | /* Default address of microcode for the Linux FMan driver */ | |
| 697 | #if defined(CONFIG_SPIFLASH) | |
| 698 | /* | |
| 699 | * env is stored at 0x100000, sector size is 0x10000, ucode is stored after | |
| 700 | * env, so we got 0x110000. | |
| 701 | */ | |
| 702 | #define CONFIG_SYS_QE_FW_IN_SPIFLASH | |
| 703 | #define CONFIG_SYS_FMAN_FW_ADDR 0x110000 | |
| 704 | #define CONFIG_SYS_QE_FW_ADDR 0x130000 | |
| 705 | #elif defined(CONFIG_SDCARD) | |
| 706 | /* | |
| 707 | * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is | |
| 708 | * about 1MB (2048 blocks), Env is stored after the image, and the env size is | |
| 709 | * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080(0x820). | |
| 710 | */ | |
| 711 | #define CONFIG_SYS_QE_FMAN_FW_IN_MMC | |
| 712 | #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820) | |
| 713 | #define CONFIG_SYS_QE_FW_ADDR (512 * 0x920) | |
| 714 | #elif defined(CONFIG_NAND) | |
| 715 | #define CONFIG_SYS_QE_FMAN_FW_IN_NAND | |
| 716 | #define CONFIG_SYS_FMAN_FW_ADDR (11 * CONFIG_SYS_NAND_BLOCK_SIZE) | |
| 717 | #define CONFIG_SYS_QE_FW_ADDR (12 * CONFIG_SYS_NAND_BLOCK_SIZE) | |
| 718 | #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) | |
| 719 | /* | |
| 720 | * Slave has no ucode locally, it can fetch this from remote. When implementing | |
| 721 | * in two corenet boards, slave's ucode could be stored in master's memory | |
| 722 | * space, the address can be mapped from slave TLB->slave LAW-> | |
| 723 | * slave SRIO or PCIE outbound window->master inbound window-> | |
| 724 | * master LAW->the ucode address in master's memory space. | |
| 725 | */ | |
| 726 | #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE | |
| 727 | #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000 | |
| 728 | #else | |
| 729 | #define CONFIG_SYS_QE_FMAN_FW_IN_NOR | |
| 730 | #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 | |
| 731 | #define CONFIG_SYS_QE_FW_ADDR 0xEFE00000 | |
| 732 | #endif | |
| 733 | #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 | |
| 734 | #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) | |
| 735 | #endif /* CONFIG_NOBQFMAN */ | |
| 736 | ||
| 737 | #ifdef CONFIG_SYS_DPAA_FMAN | |
| 738 | #define CONFIG_FMAN_ENET | |
| 739 | #define CONFIG_PHYLIB_10G | |
| 740 | #define CONFIG_PHY_VITESSE | |
| 741 | #define CONFIG_PHY_REALTEK | |
| 742 | #define CONFIG_PHY_TERANETICS | |
| 743 | #define RGMII_PHY1_ADDR 0x1 | |
| 744 | #define RGMII_PHY2_ADDR 0x2 | |
| 745 | #define SGMII_CARD_AQ_PHY_ADDR_S3 0x3 | |
| 746 | #define SGMII_CARD_AQ_PHY_ADDR_S4 0x4 | |
| 747 | #define SGMII_CARD_AQ_PHY_ADDR_S5 0x5 | |
| 748 | #define SGMII_CARD_PORT1_PHY_ADDR 0x1C | |
| 749 | #define SGMII_CARD_PORT2_PHY_ADDR 0x1D | |
| 750 | #define SGMII_CARD_PORT3_PHY_ADDR 0x1E | |
| 751 | #define SGMII_CARD_PORT4_PHY_ADDR 0x1F | |
| 752 | #endif | |
| 753 | ||
| 754 | #ifdef CONFIG_FMAN_ENET | |
| 755 | #define CONFIG_MII /* MII PHY management */ | |
| 756 | #define CONFIG_ETHPRIME "FM1@DTSEC4" | |
| 757 | #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ | |
| 758 | #endif | |
| 759 | ||
| 760 | /* | |
| 761 | * Dynamic MTD Partition support with mtdparts | |
| 762 | */ | |
| e856bdcf | 763 | #ifdef CONFIG_MTD_NOR_FLASH |
| aba80048 SL |
764 | #define CONFIG_MTD_DEVICE |
| 765 | #define CONFIG_MTD_PARTITIONS | |
| 766 | #define CONFIG_CMD_MTDPARTS | |
| 767 | #define CONFIG_FLASH_CFI_MTD | |
| 768 | #define MTDIDS_DEFAULT "nor0=fe8000000.nor,nand0=fff800000.flash," \ | |
| 769 | "spi0=spife110000.0" | |
| 770 | #define MTDPARTS_DEFAULT "mtdparts=fe8000000.nor:1m(uboot),5m(kernel)," \ | |
| 771 | "128k(dtb),96m(fs),-(user);"\ | |
| 772 | "fff800000.flash:2m(uboot),9m(kernel),"\ | |
| 773 | "128k(dtb),96m(fs),-(user);spife110000.0:" \ | |
| 774 | "2m(uboot),9m(kernel),128k(dtb),-(user)" | |
| 775 | #endif | |
| 776 | ||
| 777 | /* | |
| 778 | * Environment | |
| 779 | */ | |
| 780 | #define CONFIG_LOADS_ECHO /* echo on for serial download */ | |
| 781 | #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ | |
| 782 | ||
| 783 | /* | |
| 784 | * Command line configuration. | |
| 785 | */ | |
| aba80048 | 786 | #define CONFIG_CMD_DATE |
| aba80048 | 787 | #define CONFIG_CMD_EEPROM |
| aba80048 | 788 | #define CONFIG_CMD_ERRATA |
| aba80048 | 789 | #define CONFIG_CMD_IRQ |
| aba80048 | 790 | #define CONFIG_CMD_REGINFO |
| aba80048 SL |
791 | |
| 792 | #ifdef CONFIG_PCI | |
| 793 | #define CONFIG_CMD_PCI | |
| aba80048 SL |
794 | #endif |
| 795 | ||
| 796 | /* | |
| 797 | * Miscellaneous configurable options | |
| 798 | */ | |
| 799 | #define CONFIG_SYS_LONGHELP /* undef to save memory */ | |
| 800 | #define CONFIG_CMDLINE_EDITING /* Command-line editing */ | |
| 801 | #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ | |
| 802 | #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ | |
| aba80048 SL |
803 | #ifdef CONFIG_CMD_KGDB |
| 804 | #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ | |
| 805 | #else | |
| 806 | #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ | |
| 807 | #endif | |
| 808 | #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) | |
| 809 | #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ | |
| 810 | #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ | |
| 811 | ||
| 812 | /* | |
| 813 | * For booting Linux, the board info and command line data | |
| 814 | * have to be in the first 64 MB of memory, since this is | |
| 815 | * the maximum mapped by the Linux kernel during initialization. | |
| 816 | */ | |
| 817 | #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ | |
| 818 | #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ | |
| 819 | ||
| 820 | #ifdef CONFIG_CMD_KGDB | |
| 821 | #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ | |
| 822 | #endif | |
| 823 | ||
| 824 | /* | |
| 825 | * Environment Configuration | |
| 826 | */ | |
| 827 | #define CONFIG_ROOTPATH "/opt/nfsroot" | |
| 828 | #define CONFIG_BOOTFILE "uImage" | |
| 829 | #define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server */ | |
| 830 | #define CONFIG_LOADADDR 1000000 /* default location for tftp, bootm */ | |
| aba80048 SL |
831 | #define CONFIG_BAUDRATE 115200 |
| 832 | #define __USB_PHY_TYPE utmi | |
| 833 | ||
| aba80048 SL |
834 | #define CONFIG_EXTRA_ENV_SETTINGS \ |
| 835 | "hwconfig=fsl_ddr:ctlr_intlv=cacheline,bank_intlv=cs0_cs1;\0" \ | |
| 836 | "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0" \ | |
| 837 | "bootargs=root=/dev/ram rw console=ttyS0,115200\0" \ | |
| 838 | "ramdiskfile=t1024qds/ramdisk.uboot\0" \ | |
| 839 | "fdtfile=t1024qds/t1024qds.dtb\0" \ | |
| 840 | "netdev=eth0\0" \ | |
| 841 | "video-mode=fslfb:1024x768-32@60,monitor=dvi\0" \ | |
| 842 | "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ | |
| 843 | "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ | |
| 844 | "tftpflash=tftpboot $loadaddr $uboot && " \ | |
| 845 | "protect off $ubootaddr +$filesize && " \ | |
| 846 | "erase $ubootaddr +$filesize && " \ | |
| 847 | "cp.b $loadaddr $ubootaddr $filesize && " \ | |
| 848 | "protect on $ubootaddr +$filesize && " \ | |
| 849 | "cmp.b $loadaddr $ubootaddr $filesize\0" \ | |
| 850 | "consoledev=ttyS0\0" \ | |
| 851 | "ramdiskaddr=2000000\0" \ | |
| 852 | "fdtaddr=d00000\0" \ | |
| 853 | "bdev=sda3\0" | |
| 854 | ||
| 855 | #define CONFIG_LINUX \ | |
| 856 | "setenv bootargs root=/dev/ram rw " \ | |
| 857 | "console=$consoledev,$baudrate $othbootargs;" \ | |
| 858 | "setenv ramdiskaddr 0x02000000;" \ | |
| 859 | "setenv fdtaddr 0x00c00000;" \ | |
| 860 | "setenv loadaddr 0x1000000;" \ | |
| 861 | "bootm $loadaddr $ramdiskaddr $fdtaddr" | |
| 862 | ||
| 863 | #define CONFIG_NFSBOOTCOMMAND \ | |
| 864 | "setenv bootargs root=/dev/nfs rw " \ | |
| 865 | "nfsroot=$serverip:$rootpath " \ | |
| 866 | "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ | |
| 867 | "console=$consoledev,$baudrate $othbootargs;" \ | |
| 868 | "tftp $loadaddr $bootfile;" \ | |
| 869 | "tftp $fdtaddr $fdtfile;" \ | |
| 870 | "bootm $loadaddr - $fdtaddr" | |
| 871 | ||
| 872 | #define CONFIG_BOOTCOMMAND CONFIG_LINUX | |
| 873 | ||
| ef6c55a2 AB |
874 | /* Hash command with SHA acceleration supported in hardware */ |
| 875 | #ifdef CONFIG_FSL_CAAM | |
| 876 | #define CONFIG_CMD_HASH | |
| 877 | #define CONFIG_SHA_HW_ACCEL | |
| 878 | #endif | |
| 879 | ||
| aba80048 | 880 | #include <asm/fsl_secure_boot.h> |
| ef6c55a2 | 881 | |
| aba80048 | 882 | #endif /* __T1024QDS_H */ |