projects / people / ms / u-boot.git / blame
| Commit | Line | Data |
|---|---|---|
| 7d436078 PK |
1 | /* |
| 2 | * Copyright 2013 Freescale Semiconductor, Inc. | |
| 3 | * | |
| 4 | * See file CREDITS for list of people who contributed to this | |
| 5 | * project. | |
| 6 | * | |
| 7 | * This program is free software; you can redistribute it and/or | |
| 8 | * modify it under the terms of the GNU General Public License as | |
| 9 | * published by the Free Software Foundation; either version 2 of | |
| 10 | * the License, or (at your option) any later version. | |
| 11 | * | |
| 12 | * This program is distributed in the hope that it will be useful, | |
| 13 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| 14 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| 15 | * GNU General Public License for more details. | |
| 16 | * | |
| 17 | * You should have received a copy of the GNU General Public License | |
| 18 | * along with this program; if not, write to the Free Software | |
| 19 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | |
| 20 | * MA 02111-1307 USA | |
| 21 | */ | |
| 22 | ||
| 23 | #ifndef __CONFIG_H | |
| 24 | #define __CONFIG_H | |
| 25 | ||
| 26 | /* | |
| 27 | * T1040 QDS board configuration file | |
| 28 | */ | |
| 29 | #define CONFIG_T1040QDS | |
| 30 | #define CONFIG_PHYS_64BIT | |
| 31 | ||
| 32 | #ifdef CONFIG_RAMBOOT_PBL | |
| 33 | #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE | |
| 34 | #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc | |
| 690e4258 PK |
35 | #define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t1040qds/t1040_pbi.cfg |
| 36 | #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t1040qds/t1040_rcw.cfg | |
| 7d436078 PK |
37 | #endif |
| 38 | ||
| 39 | /* High Level Configuration Options */ | |
| 40 | #define CONFIG_BOOKE | |
| 41 | #define CONFIG_E500 /* BOOKE e500 family */ | |
| 42 | #define CONFIG_E500MC /* BOOKE e500mc family */ | |
| 43 | #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ | |
| 44 | #define CONFIG_MPC85xx /* MPC85xx/PQ3 platform */ | |
| 45 | #define CONFIG_MP /* support multiple processors */ | |
| 46 | ||
| 47 | #ifndef CONFIG_SYS_TEXT_BASE | |
| 48 | #define CONFIG_SYS_TEXT_BASE 0xeff80000 | |
| 49 | #endif | |
| 50 | ||
| 51 | #ifndef CONFIG_RESET_VECTOR_ADDRESS | |
| 52 | #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc | |
| 53 | #endif | |
| 54 | ||
| 55 | #define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ | |
| 56 | #define CONFIG_SYS_NUM_CPC CONFIG_NUM_DDR_CONTROLLERS | |
| 57 | #define CONFIG_FSL_IFC /* Enable IFC Support */ | |
| 58 | #define CONFIG_PCI /* Enable PCI/PCIE */ | |
| 59 | #define CONFIG_PCI_INDIRECT_BRIDGE | |
| 60 | #define CONFIG_PCIE1 /* PCIE controler 1 */ | |
| 61 | #define CONFIG_PCIE2 /* PCIE controler 2 */ | |
| 62 | #define CONFIG_PCIE3 /* PCIE controler 3 */ | |
| 63 | #define CONFIG_PCIE4 /* PCIE controler 4 */ | |
| 64 | ||
| 65 | #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ | |
| 66 | #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ | |
| 67 | ||
| 68 | #define CONFIG_FSL_LAW /* Use common FSL init code */ | |
| 69 | ||
| 70 | #define CONFIG_ENV_OVERWRITE | |
| 71 | ||
| 72 | #ifdef CONFIG_SYS_NO_FLASH | |
| 73 | #define CONFIG_ENV_IS_NOWHERE | |
| 74 | #else | |
| 75 | #define CONFIG_FLASH_CFI_DRIVER | |
| 76 | #define CONFIG_SYS_FLASH_CFI | |
| 77 | #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE | |
| 78 | #endif | |
| 79 | ||
| 80 | #ifndef CONFIG_SYS_NO_FLASH | |
| 81 | #if defined(CONFIG_SPIFLASH) | |
| 82 | #define CONFIG_SYS_EXTRA_ENV_RELOC | |
| 83 | #define CONFIG_ENV_IS_IN_SPI_FLASH | |
| 84 | #define CONFIG_ENV_SPI_BUS 0 | |
| 85 | #define CONFIG_ENV_SPI_CS 0 | |
| 86 | #define CONFIG_ENV_SPI_MAX_HZ 10000000 | |
| 87 | #define CONFIG_ENV_SPI_MODE 0 | |
| 88 | #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ | |
| 89 | #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ | |
| 90 | #define CONFIG_ENV_SECT_SIZE 0x10000 | |
| 91 | #elif defined(CONFIG_SDCARD) | |
| 92 | #define CONFIG_SYS_EXTRA_ENV_RELOC | |
| 93 | #define CONFIG_ENV_IS_IN_MMC | |
| 94 | #define CONFIG_SYS_MMC_ENV_DEV 0 | |
| 95 | #define CONFIG_ENV_SIZE 0x2000 | |
| 96 | #define CONFIG_ENV_OFFSET (512 * 1105) | |
| 97 | #elif defined(CONFIG_NAND) | |
| 98 | #define CONFIG_SYS_EXTRA_ENV_RELOC | |
| 99 | #define CONFIG_ENV_IS_IN_NAND | |
| 100 | #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE | |
| 101 | #define CONFIG_ENV_OFFSET (5 * CONFIG_SYS_NAND_BLOCK_SIZE) | |
| 102 | #else | |
| 103 | #define CONFIG_ENV_IS_IN_FLASH | |
| 104 | #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) | |
| 105 | #define CONFIG_ENV_SIZE 0x2000 | |
| 106 | #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ | |
| 107 | #endif | |
| 108 | #else /* CONFIG_SYS_NO_FLASH */ | |
| 109 | #define CONFIG_ENV_SIZE 0x2000 | |
| 110 | #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ | |
| 111 | #endif | |
| 112 | ||
| 113 | #ifndef __ASSEMBLY__ | |
| 114 | unsigned long get_board_sys_clk(void); | |
| 115 | unsigned long get_board_ddr_clk(void); | |
| 116 | #endif | |
| 117 | ||
| 118 | #define CONFIG_SYS_CLK_FREQ get_board_sys_clk() /* sysclk for MPC85xx */ | |
| 119 | #define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() | |
| 120 | ||
| 121 | /* | |
| 122 | * These can be toggled for performance analysis, otherwise use default. | |
| 123 | */ | |
| 124 | #define CONFIG_SYS_CACHE_STASHING | |
| 125 | #define CONFIG_BACKSIDE_L2_CACHE | |
| 126 | #define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E | |
| 127 | #define CONFIG_BTB /* toggle branch predition */ | |
| 128 | #define CONFIG_DDR_ECC | |
| 129 | #ifdef CONFIG_DDR_ECC | |
| 130 | #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER | |
| 131 | #define CONFIG_MEM_INIT_VALUE 0xdeadbeef | |
| 132 | #endif | |
| 133 | ||
| 134 | #define CONFIG_ENABLE_36BIT_PHYS | |
| 135 | ||
| 136 | #define CONFIG_ADDR_MAP | |
| 137 | #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ | |
| 138 | ||
| 139 | #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ | |
| 140 | #define CONFIG_SYS_MEMTEST_END 0x00400000 | |
| 141 | #define CONFIG_SYS_ALT_MEMTEST | |
| 142 | #define CONFIG_PANIC_HANG /* do not reset board on panic */ | |
| 143 | ||
| 144 | /* | |
| 145 | * Config the L3 Cache as L3 SRAM | |
| 146 | */ | |
| 147 | #define CONFIG_SYS_INIT_L3_ADDR 0xFFFC0000 | |
| 148 | ||
| 149 | #define CONFIG_SYS_DCSRBAR 0xf0000000 | |
| 150 | #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull | |
| 151 | ||
| 152 | /* EEPROM */ | |
| 153 | #define CONFIG_ID_EEPROM | |
| 154 | #define CONFIG_SYS_I2C_EEPROM_NXID | |
| 155 | #define CONFIG_SYS_EEPROM_BUS_NUM 0 | |
| 156 | #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 | |
| 157 | #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 | |
| 158 | #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 | |
| 159 | #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 | |
| 160 | ||
| 161 | /* | |
| 162 | * DDR Setup | |
| 163 | */ | |
| 164 | #define CONFIG_VERY_BIG_RAM | |
| 165 | #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 | |
| 166 | #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE | |
| 167 | ||
| 168 | /* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */ | |
| 169 | #define CONFIG_DIMM_SLOTS_PER_CTLR 1 | |
| 2eb3ac7f | 170 | #define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) |
| 7d436078 PK |
171 | |
| 172 | #define CONFIG_DDR_SPD | |
| 5614e71b | 173 | #define CONFIG_SYS_FSL_DDR3 |
| 7d436078 PK |
174 | #define CONFIG_FSL_DDR_INTERACTIVE |
| 175 | ||
| 176 | #define CONFIG_SYS_SPD_BUS_NUM 0 | |
| 177 | #define SPD_EEPROM_ADDRESS 0x51 | |
| 178 | ||
| 179 | #define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ | |
| 180 | ||
| 181 | /* | |
| 182 | * IFC Definitions | |
| 183 | */ | |
| 184 | #define CONFIG_SYS_FLASH_BASE 0xe0000000 | |
| 185 | #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) | |
| 186 | ||
| 187 | #define CONFIG_SYS_NOR0_CSPR_EXT (0xf) | |
| 188 | #define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \ | |
| 189 | + 0x8000000) | \ | |
| 190 | CSPR_PORT_SIZE_16 | \ | |
| 191 | CSPR_MSEL_NOR | \ | |
| 192 | CSPR_V) | |
| 193 | #define CONFIG_SYS_NOR1_CSPR_EXT (0xf) | |
| 194 | #define CONFIG_SYS_NOR1_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ | |
| 195 | CSPR_PORT_SIZE_16 | \ | |
| 196 | CSPR_MSEL_NOR | \ | |
| 197 | CSPR_V) | |
| 198 | #define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) | |
| 199 | /* NOR Flash Timing Params */ | |
| 200 | #define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80 | |
| 201 | #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ | |
| 202 | FTIM0_NOR_TEADC(0x5) | \ | |
| 203 | FTIM0_NOR_TEAHC(0x5)) | |
| 204 | #define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ | |
| 205 | FTIM1_NOR_TRAD_NOR(0x1A) |\ | |
| 206 | FTIM1_NOR_TSEQRAD_NOR(0x13)) | |
| 207 | #define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ | |
| 208 | FTIM2_NOR_TCH(0x4) | \ | |
| 209 | FTIM2_NOR_TWPH(0x0E) | \ | |
| 210 | FTIM2_NOR_TWP(0x1c)) | |
| 211 | #define CONFIG_SYS_NOR_FTIM3 0x0 | |
| 212 | ||
| 213 | #define CONFIG_SYS_FLASH_QUIET_TEST | |
| 214 | #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ | |
| 215 | ||
| 216 | #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ | |
| 217 | #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ | |
| 218 | #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ | |
| 219 | #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ | |
| 220 | ||
| 221 | #define CONFIG_SYS_FLASH_EMPTY_INFO | |
| 222 | #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS \ | |
| 223 | + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS} | |
| 224 | #define CONFIG_FSL_QIXIS /* use common QIXIS code */ | |
| 225 | #define QIXIS_BASE 0xffdf0000 | |
| 226 | #define QIXIS_BASE_PHYS (0xf00000000ull | QIXIS_BASE) | |
| 227 | #define QIXIS_LBMAP_SWITCH 0x06 | |
| 228 | #define QIXIS_LBMAP_MASK 0x0f | |
| 229 | #define QIXIS_LBMAP_SHIFT 0 | |
| 230 | #define QIXIS_LBMAP_DFLTBANK 0x00 | |
| 231 | #define QIXIS_LBMAP_ALTBANK 0x04 | |
| 232 | #define QIXIS_RST_CTL_RESET 0x31 | |
| 233 | #define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20 | |
| 234 | #define QIXIS_RCFG_CTL_RECONFIG_START 0x21 | |
| 235 | #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 | |
| 8c618dd6 | 236 | #define QIXIS_RST_FORCE_MEM 0x01 |
| 7d436078 PK |
237 | |
| 238 | #define CONFIG_SYS_CSPR3_EXT (0xf) | |
| 239 | #define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \ | |
| 240 | | CSPR_PORT_SIZE_8 \ | |
| 241 | | CSPR_MSEL_GPCM \ | |
| 242 | | CSPR_V) | |
| 243 | #define CONFIG_SYS_AMASK3 IFC_AMASK(4*1024) | |
| 244 | #define CONFIG_SYS_CSOR3 0x0 | |
| 245 | /* QIXIS Timing parameters for IFC CS3 */ | |
| 246 | #define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ | |
| 247 | FTIM0_GPCM_TEADC(0x0e) | \ | |
| 248 | FTIM0_GPCM_TEAHC(0x0e)) | |
| 249 | #define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0xff) | \ | |
| 250 | FTIM1_GPCM_TRAD(0x3f)) | |
| 251 | #define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ | |
| 562de1d6 | 252 | FTIM2_GPCM_TCH(0x8) | \ |
| 7d436078 PK |
253 | FTIM2_GPCM_TWP(0x1f)) |
| 254 | #define CONFIG_SYS_CS3_FTIM3 0x0 | |
| 255 | ||
| 256 | #define CONFIG_NAND_FSL_IFC | |
| 257 | #define CONFIG_SYS_NAND_BASE 0xff800000 | |
| 258 | #define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE) | |
| 259 | ||
| 260 | #define CONFIG_SYS_NAND_CSPR_EXT (0xf) | |
| 261 | #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ | |
| 262 | | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ | |
| 263 | | CSPR_MSEL_NAND /* MSEL = NAND */ \ | |
| 264 | | CSPR_V) | |
| 265 | #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) | |
| 266 | ||
| 267 | #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ | |
| 268 | | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ | |
| 269 | | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ | |
| 270 | | CSOR_NAND_RAL_3 /* RAL = 3Byes */ \ | |
| 271 | | CSOR_NAND_PGS_2K /* Page Size = 2K */ \ | |
| 272 | | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \ | |
| 273 | | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ | |
| 274 | ||
| 275 | #define CONFIG_SYS_NAND_ONFI_DETECTION | |
| 276 | ||
| 277 | /* ONFI NAND Flash mode0 Timing Params */ | |
| 278 | #define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \ | |
| 279 | FTIM0_NAND_TWP(0x18) | \ | |
| 280 | FTIM0_NAND_TWCHT(0x07) | \ | |
| 281 | FTIM0_NAND_TWH(0x0a)) | |
| 282 | #define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ | |
| 283 | FTIM1_NAND_TWBE(0x39) | \ | |
| 284 | FTIM1_NAND_TRR(0x0e) | \ | |
| 285 | FTIM1_NAND_TRP(0x18)) | |
| 286 | #define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ | |
| 287 | FTIM2_NAND_TREH(0x0a) | \ | |
| 288 | FTIM2_NAND_TWHRE(0x1e)) | |
| 289 | #define CONFIG_SYS_NAND_FTIM3 0x0 | |
| 290 | ||
| 291 | #define CONFIG_SYS_NAND_DDR_LAW 11 | |
| 292 | #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } | |
| 293 | #define CONFIG_SYS_MAX_NAND_DEVICE 1 | |
| 294 | #define CONFIG_MTD_NAND_VERIFY_WRITE | |
| 295 | #define CONFIG_CMD_NAND | |
| 296 | ||
| 297 | #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) | |
| 298 | ||
| 299 | #if defined(CONFIG_NAND) | |
| 300 | #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT | |
| 301 | #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR | |
| 302 | #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK | |
| 303 | #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR | |
| 304 | #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 | |
| 305 | #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 | |
| 306 | #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 | |
| 307 | #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 | |
| 308 | #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR0_CSPR_EXT | |
| 309 | #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR0_CSPR | |
| 310 | #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK | |
| 311 | #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR | |
| 312 | #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 | |
| 313 | #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 | |
| 314 | #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 | |
| 315 | #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 | |
| 316 | #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR1_CSPR_EXT | |
| 317 | #define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR1_CSPR | |
| 318 | #define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK | |
| 319 | #define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR | |
| 320 | #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0 | |
| 321 | #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1 | |
| 322 | #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2 | |
| 323 | #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3 | |
| 324 | #else | |
| 325 | #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT | |
| 326 | #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR | |
| 327 | #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK | |
| 328 | #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR | |
| 329 | #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 | |
| 330 | #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 | |
| 331 | #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 | |
| 332 | #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 | |
| 333 | #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR1_CSPR_EXT | |
| 334 | #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR1_CSPR | |
| 335 | #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK | |
| 336 | #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR | |
| 337 | #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 | |
| 338 | #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 | |
| 339 | #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 | |
| 340 | #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 | |
| 341 | #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NAND_CSPR_EXT | |
| 342 | #define CONFIG_SYS_CSPR2 CONFIG_SYS_NAND_CSPR | |
| 343 | #define CONFIG_SYS_AMASK2 CONFIG_SYS_NAND_AMASK | |
| 344 | #define CONFIG_SYS_CSOR2 CONFIG_SYS_NAND_CSOR | |
| 345 | #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NAND_FTIM0 | |
| 346 | #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NAND_FTIM1 | |
| 347 | #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NAND_FTIM2 | |
| 348 | #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NAND_FTIM3 | |
| 349 | #endif | |
| 350 | ||
| 351 | #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE | |
| 352 | ||
| 353 | #if defined(CONFIG_RAMBOOT_PBL) | |
| 354 | #define CONFIG_SYS_RAMBOOT | |
| 355 | #endif | |
| 356 | ||
| 357 | #define CONFIG_BOARD_EARLY_INIT_R | |
| 358 | #define CONFIG_MISC_INIT_R | |
| 359 | ||
| 360 | #define CONFIG_HWCONFIG | |
| 361 | ||
| 362 | /* define to use L1 as initial stack */ | |
| 363 | #define CONFIG_L1_INIT_RAM | |
| 364 | #define CONFIG_SYS_INIT_RAM_LOCK | |
| 365 | #define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ | |
| 366 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf | |
| 367 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe0ec000 | |
| 368 | /* The assembler doesn't like typecast */ | |
| 369 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ | |
| 370 | ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ | |
| 371 | CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) | |
| 372 | #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 | |
| 373 | ||
| 374 | #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ | |
| 375 | GENERATED_GBL_DATA_SIZE) | |
| 376 | #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET | |
| 377 | ||
| 378 | #define CONFIG_SYS_MONITOR_LEN (512 * 1024) | |
| 379 | #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) | |
| 380 | ||
| 381 | /* Serial Port - controlled on board with jumper J8 | |
| 382 | * open - index 2 | |
| 383 | * shorted - index 1 | |
| 384 | */ | |
| 385 | #define CONFIG_CONS_INDEX 1 | |
| 386 | #define CONFIG_SYS_NS16550 | |
| 387 | #define CONFIG_SYS_NS16550_SERIAL | |
| 388 | #define CONFIG_SYS_NS16550_REG_SIZE 1 | |
| 389 | #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) | |
| 390 | ||
| 391 | #define CONFIG_SYS_BAUDRATE_TABLE \ | |
| 392 | {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} | |
| 393 | ||
| 394 | #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) | |
| 395 | #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) | |
| 396 | #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) | |
| 397 | #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) | |
| 398 | #define CONFIG_SERIAL_MULTI /* Enable both serial ports */ | |
| 399 | #define CONFIG_SYS_CONSOLE_IS_IN_ENV /* determine from environment */ | |
| 400 | ||
| 401 | /* Use the HUSH parser */ | |
| 402 | #define CONFIG_SYS_HUSH_PARSER | |
| 403 | #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " | |
| 404 | ||
| 405 | /* pass open firmware flat tree */ | |
| 406 | #define CONFIG_OF_LIBFDT | |
| 407 | #define CONFIG_OF_BOARD_SETUP | |
| 408 | #define CONFIG_OF_STDOUT_VIA_ALIAS | |
| 409 | ||
| 410 | /* new uImage format support */ | |
| 411 | #define CONFIG_FIT | |
| 412 | #define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ | |
| 413 | ||
| 414 | /* I2C */ | |
| 415 | #define CONFIG_SYS_I2C | |
| 416 | #define CONFIG_SYS_I2C_FSL /* Use FSL common I2C driver */ | |
| 2eb3ac7f | 417 | #define CONFIG_SYS_FSL_I2C_SPEED 50000 /* I2C speed in Hz */ |
| 7d436078 | 418 | #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F |
| 2eb3ac7f | 419 | #define CONFIG_SYS_FSL_I2C2_SPEED 50000 /* I2C speed in Hz */ |
| 7d436078 PK |
420 | #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F |
| 421 | #define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 | |
| 422 | #define CONFIG_SYS_FSL_I2C2_OFFSET 0x119000 | |
| 423 | ||
| 424 | #define I2C_MUX_PCA_ADDR 0x77 | |
| 425 | #define I2C_MUX_PCA_ADDR_PRI 0x77 /* Primary Mux*/ | |
| 426 | ||
| 427 | ||
| 428 | /* I2C bus multiplexer */ | |
| 429 | #define I2C_MUX_CH_DEFAULT 0x8 | |
| 430 | ||
| 431 | /* | |
| 432 | * RTC configuration | |
| 433 | */ | |
| 434 | #define RTC | |
| 435 | #define CONFIG_RTC_DS3231 1 | |
| 436 | #define CONFIG_SYS_I2C_RTC_ADDR 0x68 | |
| 437 | ||
| 438 | /* | |
| 439 | * eSPI - Enhanced SPI | |
| 440 | */ | |
| 441 | #define CONFIG_FSL_ESPI | |
| 442 | #define CONFIG_SPI_FLASH | |
| 443 | #define CONFIG_SPI_FLASH_STMICRO | |
| 444 | #define CONFIG_SPI_FLASH_SST | |
| 445 | #define CONFIG_SPI_FLASH_EON | |
| 446 | #define CONFIG_CMD_SF | |
| 447 | #define CONFIG_SF_DEFAULT_SPEED 10000000 | |
| 448 | #define CONFIG_SF_DEFAULT_MODE 0 | |
| 449 | ||
| 450 | /* | |
| 451 | * General PCI | |
| 452 | * Memory space is mapped 1-1, but I/O space must start from 0. | |
| 453 | */ | |
| 454 | ||
| 455 | #ifdef CONFIG_PCI | |
| 456 | /* controller 1, direct to uli, tgtid 3, Base address 20000 */ | |
| 457 | #ifdef CONFIG_PCIE1 | |
| 458 | #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 | |
| 459 | #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 | |
| 460 | #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull | |
| 461 | #define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000 /* 256M */ | |
| 462 | #define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 | |
| 463 | #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 | |
| 464 | #define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull | |
| 465 | #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ | |
| 466 | #endif | |
| 467 | ||
| 468 | /* controller 2, Slot 2, tgtid 2, Base address 201000 */ | |
| 469 | #ifdef CONFIG_PCIE2 | |
| 470 | #define CONFIG_SYS_PCIE2_MEM_VIRT 0x90000000 | |
| 471 | #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 | |
| 472 | #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc10000000ull | |
| 473 | #define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000 /* 256M */ | |
| 474 | #define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 | |
| 475 | #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 | |
| 476 | #define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull | |
| 477 | #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ | |
| 478 | #endif | |
| 479 | ||
| 480 | /* controller 3, Slot 1, tgtid 1, Base address 202000 */ | |
| 481 | #ifdef CONFIG_PCIE3 | |
| 482 | #define CONFIG_SYS_PCIE3_MEM_VIRT 0xa0000000 | |
| 483 | #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 | |
| 484 | #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc20000000ull | |
| 485 | #define CONFIG_SYS_PCIE3_MEM_SIZE 0x10000000 /* 256M */ | |
| 486 | #define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 | |
| 487 | #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 | |
| 488 | #define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull | |
| 489 | #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ | |
| 490 | #endif | |
| 491 | ||
| 492 | /* controller 4, Base address 203000 */ | |
| 493 | #ifdef CONFIG_PCIE4 | |
| 494 | #define CONFIG_SYS_PCIE4_MEM_VIRT 0xb0000000 | |
| 495 | #define CONFIG_SYS_PCIE4_MEM_BUS 0xe0000000 | |
| 496 | #define CONFIG_SYS_PCIE4_MEM_PHYS 0xc30000000ull | |
| 497 | #define CONFIG_SYS_PCIE4_MEM_SIZE 0x10000000 /* 256M */ | |
| 498 | #define CONFIG_SYS_PCIE4_IO_VIRT 0xf8030000 | |
| 499 | #define CONFIG_SYS_PCIE4_IO_BUS 0x00000000 | |
| 500 | #define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull | |
| 501 | #define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */ | |
| 502 | #endif | |
| 503 | ||
| 504 | #define CONFIG_PCI_PNP /* do pci plug-and-play */ | |
| 505 | #define CONFIG_E1000 | |
| 506 | ||
| 507 | #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ | |
| 508 | #define CONFIG_DOS_PARTITION | |
| 509 | #endif /* CONFIG_PCI */ | |
| 510 | ||
| 511 | /* SATA */ | |
| 512 | #define CONFIG_FSL_SATA_V2 | |
| 513 | #ifdef CONFIG_FSL_SATA_V2 | |
| 514 | #define CONFIG_LIBATA | |
| 515 | #define CONFIG_FSL_SATA | |
| 516 | ||
| 517 | #define CONFIG_SYS_SATA_MAX_DEVICE 2 | |
| 518 | #define CONFIG_SATA1 | |
| 519 | #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR | |
| 520 | #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA | |
| 521 | #define CONFIG_SATA2 | |
| 522 | #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR | |
| 523 | #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA | |
| 524 | ||
| 525 | #define CONFIG_LBA48 | |
| 526 | #define CONFIG_CMD_SATA | |
| 527 | #define CONFIG_DOS_PARTITION | |
| 528 | #define CONFIG_CMD_EXT2 | |
| 529 | #endif | |
| 530 | ||
| 531 | /* | |
| 532 | * USB | |
| 533 | */ | |
| 534 | #define CONFIG_HAS_FSL_DR_USB | |
| 535 | ||
| 536 | #ifdef CONFIG_HAS_FSL_DR_USB | |
| 537 | #define CONFIG_USB_EHCI | |
| 538 | ||
| 539 | #ifdef CONFIG_USB_EHCI | |
| 540 | #define CONFIG_CMD_USB | |
| 541 | #define CONFIG_USB_STORAGE | |
| 542 | #define CONFIG_USB_EHCI_FSL | |
| 543 | #define CONFIG_EHCI_HCD_INIT_AFTER_RESET | |
| 544 | #define CONFIG_CMD_EXT2 | |
| 545 | #endif | |
| 546 | #endif | |
| 547 | ||
| 548 | #define CONFIG_MMC | |
| 549 | ||
| 550 | #ifdef CONFIG_MMC | |
| 551 | #define CONFIG_FSL_ESDHC | |
| 552 | #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR | |
| 553 | #define CONFIG_CMD_MMC | |
| 554 | #define CONFIG_GENERIC_MMC | |
| 555 | #define CONFIG_CMD_EXT2 | |
| 556 | #define CONFIG_CMD_FAT | |
| 557 | #define CONFIG_DOS_PARTITION | |
| 558 | #endif | |
| 559 | ||
| 560 | /* Qman/Bman */ | |
| 561 | #ifndef CONFIG_NOBQFMAN | |
| 562 | #define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ | |
| 563 | #define CONFIG_SYS_BMAN_NUM_PORTALS 25 | |
| 564 | #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 | |
| 565 | #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull | |
| 566 | #define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 | |
| 567 | #define CONFIG_SYS_QMAN_NUM_PORTALS 25 | |
| 568 | #define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 | |
| 569 | #define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull | |
| 570 | #define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 | |
| 571 | ||
| 572 | #define CONFIG_SYS_DPAA_FMAN | |
| 573 | #define CONFIG_SYS_DPAA_PME | |
| 574 | ||
| 575 | /* Default address of microcode for the Linux Fman driver */ | |
| 576 | #if defined(CONFIG_SPIFLASH) | |
| 577 | /* | |
| 578 | * env is stored at 0x100000, sector size is 0x10000, ucode is stored after | |
| 579 | * env, so we got 0x110000. | |
| 580 | */ | |
| 581 | #define CONFIG_SYS_QE_FW_IN_SPIFLASH | |
| 582 | #define CONFIG_SYS_QE_FMAN_FW_ADDR 0x110000 | |
| 583 | #elif defined(CONFIG_SDCARD) | |
| 584 | /* | |
| 585 | * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is | |
| 586 | * about 545KB (1089 blocks), Env is stored after the image, and the env size is | |
| 587 | * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130. | |
| 588 | */ | |
| 589 | #define CONFIG_SYS_QE_FMAN_FW_IN_MMC | |
| 590 | #define CONFIG_SYS_QE_FMAN_FW_ADDR (512 * 1130) | |
| 591 | #elif defined(CONFIG_NAND) | |
| 592 | #define CONFIG_SYS_QE_FMAN_FW_IN_NAND | |
| 593 | #define CONFIG_SYS_QE_FMAN_FW_ADDR (6 * CONFIG_SYS_NAND_BLOCK_SIZE) | |
| 594 | #else | |
| 595 | #define CONFIG_SYS_QE_FMAN_FW_IN_NOR | |
| 596 | #define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF40000 | |
| 597 | #endif | |
| 598 | #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 | |
| 599 | #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) | |
| 600 | #endif /* CONFIG_NOBQFMAN */ | |
| 601 | ||
| 602 | #ifdef CONFIG_SYS_DPAA_FMAN | |
| 603 | #define CONFIG_FMAN_ENET | |
| 604 | #define CONFIG_PHYLIB_10G | |
| 605 | #define CONFIG_PHY_VITESSE | |
| 606 | #define CONFIG_PHY_REALTEK | |
| 607 | #define CONFIG_PHY_TERANETICS | |
| 608 | #define SGMII_CARD_PORT1_PHY_ADDR 0x1C | |
| 609 | #define SGMII_CARD_PORT2_PHY_ADDR 0x10 | |
| 610 | #define SGMII_CARD_PORT3_PHY_ADDR 0x1E | |
| 611 | #define SGMII_CARD_PORT4_PHY_ADDR 0x11 | |
| 612 | #endif | |
| 613 | ||
| 614 | #ifdef CONFIG_FMAN_ENET | |
| 615 | #define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR 0x10 | |
| 616 | #define CONFIG_SYS_FM1_DTSEC6_PHY_ADDR 0x11 | |
| 617 | #define CONFIG_SYS_FM1_10GEC1_PHY_ADDR 4 | |
| 618 | ||
| 619 | #define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR 0x1c | |
| 620 | #define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR 0x1d | |
| 621 | #define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR 0x1e | |
| 622 | #define CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR 0x1f | |
| 623 | ||
| 624 | #define CONFIG_MII /* MII PHY management */ | |
| 625 | #define CONFIG_ETHPRIME "FM1@DTSEC1" | |
| 626 | #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ | |
| 627 | #endif | |
| 628 | ||
| 629 | /* | |
| 630 | * Environment | |
| 631 | */ | |
| 632 | #define CONFIG_LOADS_ECHO /* echo on for serial download */ | |
| 633 | #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ | |
| 634 | ||
| 635 | /* | |
| 636 | * Command line configuration. | |
| 637 | */ | |
| 638 | #include <config_cmd_default.h> | |
| 639 | ||
| 640 | #define CONFIG_CMD_DATE | |
| 641 | #define CONFIG_CMD_DHCP | |
| 642 | #define CONFIG_CMD_EEPROM | |
| 643 | #define CONFIG_CMD_ELF | |
| 644 | #define CONFIG_CMD_ERRATA | |
| 645 | #define CONFIG_CMD_GREPENV | |
| 646 | #define CONFIG_CMD_IRQ | |
| 647 | #define CONFIG_CMD_I2C | |
| 648 | #define CONFIG_CMD_MII | |
| 649 | #define CONFIG_CMD_PING | |
| 650 | #define CONFIG_CMD_REGINFO | |
| 651 | #define CONFIG_CMD_SETEXPR | |
| 652 | ||
| 653 | #ifdef CONFIG_PCI | |
| 654 | #define CONFIG_CMD_PCI | |
| 655 | #define CONFIG_CMD_NET | |
| 656 | #endif | |
| 657 | ||
| 658 | /* | |
| 659 | * Miscellaneous configurable options | |
| 660 | */ | |
| 661 | #define CONFIG_SYS_LONGHELP /* undef to save memory */ | |
| 662 | #define CONFIG_CMDLINE_EDITING /* Command-line editing */ | |
| 663 | #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ | |
| 664 | #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ | |
| 665 | #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ | |
| 666 | #ifdef CONFIG_CMD_KGDB | |
| 667 | #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ | |
| 668 | #else | |
| 669 | #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ | |
| 670 | #endif | |
| 671 | #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) | |
| 672 | #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ | |
| 673 | #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ | |
| 674 | #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks*/ | |
| 675 | ||
| 676 | /* | |
| 677 | * For booting Linux, the board info and command line data | |
| 678 | * have to be in the first 64 MB of memory, since this is | |
| 679 | * the maximum mapped by the Linux kernel during initialization. | |
| 680 | */ | |
| 681 | #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ | |
| 682 | #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ | |
| 683 | ||
| 684 | #ifdef CONFIG_CMD_KGDB | |
| 685 | #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ | |
| 7d436078 PK |
686 | #endif |
| 687 | ||
| 688 | /* | |
| 689 | * Environment Configuration | |
| 690 | */ | |
| 691 | #define CONFIG_ROOTPATH "/opt/nfsroot" | |
| 692 | #define CONFIG_BOOTFILE "uImage" | |
| 693 | #define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server*/ | |
| 694 | ||
| 695 | /* default location for tftp and bootm */ | |
| 696 | #define CONFIG_LOADADDR 1000000 | |
| 697 | ||
| 698 | #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ | |
| 699 | ||
| 700 | #define CONFIG_BAUDRATE 115200 | |
| 701 | ||
| 702 | #define __USB_PHY_TYPE utmi | |
| 703 | ||
| 704 | #define CONFIG_EXTRA_ENV_SETTINGS \ | |
| 705 | "hwconfig=fsl_ddr:ctlr_intlv=cacheline," \ | |
| 706 | "bank_intlv=cs0_cs1;" \ | |
| 707 | "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ | |
| 708 | "netdev=eth0\0" \ | |
| 709 | "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ | |
| 710 | "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ | |
| 711 | "tftpflash=tftpboot $loadaddr $uboot && " \ | |
| 712 | "protect off $ubootaddr +$filesize && " \ | |
| 713 | "erase $ubootaddr +$filesize && " \ | |
| 714 | "cp.b $loadaddr $ubootaddr $filesize && " \ | |
| 715 | "protect on $ubootaddr +$filesize && " \ | |
| 716 | "cmp.b $loadaddr $ubootaddr $filesize\0" \ | |
| 717 | "consoledev=ttyS0\0" \ | |
| 718 | "ramdiskaddr=2000000\0" \ | |
| 719 | "ramdiskfile=t1040qds/ramdisk.uboot\0" \ | |
| 720 | "fdtaddr=c00000\0" \ | |
| 721 | "fdtfile=t1040qds/t1040qds.dtb\0" \ | |
| 722 | "bdev=sda3\0" \ | |
| 723 | "c=ffe\0" | |
| 724 | ||
| 725 | #define CONFIG_LINUX \ | |
| 726 | "setenv bootargs root=/dev/ram rw " \ | |
| 727 | "console=$consoledev,$baudrate $othbootargs;" \ | |
| 728 | "setenv ramdiskaddr 0x02000000;" \ | |
| 729 | "setenv fdtaddr 0x00c00000;" \ | |
| 730 | "setenv loadaddr 0x1000000;" \ | |
| 731 | "bootm $loadaddr $ramdiskaddr $fdtaddr" | |
| 732 | ||
| 733 | #define CONFIG_HDBOOT \ | |
| 734 | "setenv bootargs root=/dev/$bdev rw " \ | |
| 735 | "console=$consoledev,$baudrate $othbootargs;" \ | |
| 736 | "tftp $loadaddr $bootfile;" \ | |
| 737 | "tftp $fdtaddr $fdtfile;" \ | |
| 738 | "bootm $loadaddr - $fdtaddr" | |
| 739 | ||
| 740 | #define CONFIG_NFSBOOTCOMMAND \ | |
| 741 | "setenv bootargs root=/dev/nfs rw " \ | |
| 742 | "nfsroot=$serverip:$rootpath " \ | |
| 743 | "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ | |
| 744 | "console=$consoledev,$baudrate $othbootargs;" \ | |
| 745 | "tftp $loadaddr $bootfile;" \ | |
| 746 | "tftp $fdtaddr $fdtfile;" \ | |
| 747 | "bootm $loadaddr - $fdtaddr" | |
| 748 | ||
| 749 | #define CONFIG_RAMBOOTCOMMAND \ | |
| 750 | "setenv bootargs root=/dev/ram rw " \ | |
| 751 | "console=$consoledev,$baudrate $othbootargs;" \ | |
| 752 | "tftp $ramdiskaddr $ramdiskfile;" \ | |
| 753 | "tftp $loadaddr $bootfile;" \ | |
| 754 | "tftp $fdtaddr $fdtfile;" \ | |
| 755 | "bootm $loadaddr $ramdiskaddr $fdtaddr" | |
| 756 | ||
| 757 | #define CONFIG_BOOTCOMMAND CONFIG_LINUX | |
| 758 | ||
| 759 | #ifdef CONFIG_SECURE_BOOT | |
| 760 | #include <asm/fsl_secure_boot.h> | |
| 761 | #endif | |
| 762 | ||
| 763 | #endif /* __CONFIG_H */ |