projects / people / ms / u-boot.git / blame
| Commit | Line | Data |
|---|---|---|
| 062ef1a6 PJ |
1 | /* |
| 2 | * Copyright 2013 Freescale Semiconductor, Inc. | |
| 3 | * | |
| 4 | * See file CREDITS for list of people who contributed to this | |
| 5 | * project. | |
| 6 | * | |
| 7 | * This program is free software; you can redistribute it and/or | |
| 8 | * modify it under the terms of the GNU General Public License as | |
| 9 | * published by the Free Software Foundation; either version 2 of | |
| 10 | * the License, or (at your option) any later version. | |
| 11 | * | |
| 12 | * This program is distributed in the hope that it will be useful, | |
| 13 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| 14 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| 15 | * GNU General Public License for more details. | |
| 16 | * | |
| 17 | * You should have received a copy of the GNU General Public License | |
| 18 | * along with this program; if not, write to the Free Software | |
| 19 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | |
| 20 | * MA 02111-1307 USA | |
| 21 | */ | |
| 22 | ||
| 23 | #ifndef __CONFIG_H | |
| 24 | #define __CONFIG_H | |
| 25 | ||
| 26 | /* | |
| 27 | * T1040 RDB board configuration file | |
| 28 | */ | |
| 29 | #define CONFIG_T104xRDB | |
| 30 | #define CONFIG_T1040RDB | |
| 31 | #define CONFIG_PHYS_64BIT | |
| 32 | ||
| 33 | #ifdef CONFIG_RAMBOOT_PBL | |
| 34 | #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE | |
| 35 | #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc | |
| 36 | #endif | |
| 37 | ||
| 38 | /* High Level Configuration Options */ | |
| 39 | #define CONFIG_BOOKE | |
| 40 | #define CONFIG_E500 /* BOOKE e500 family */ | |
| 41 | #define CONFIG_E500MC /* BOOKE e500mc family */ | |
| 42 | #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ | |
| 062ef1a6 PJ |
43 | #define CONFIG_MP /* support multiple processors */ |
| 44 | ||
| 45 | #ifndef CONFIG_SYS_TEXT_BASE | |
| e222b1f3 | 46 | #define CONFIG_SYS_TEXT_BASE 0xeff40000 |
| 062ef1a6 PJ |
47 | #endif |
| 48 | ||
| 49 | #ifndef CONFIG_RESET_VECTOR_ADDRESS | |
| 50 | #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc | |
| 51 | #endif | |
| 52 | ||
| 53 | #define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ | |
| 54 | #define CONFIG_SYS_NUM_CPC CONFIG_NUM_DDR_CONTROLLERS | |
| 55 | #define CONFIG_FSL_IFC /* Enable IFC Support */ | |
| 56 | #define CONFIG_PCI /* Enable PCI/PCIE */ | |
| 57 | #define CONFIG_PCI_INDIRECT_BRIDGE | |
| 58 | #define CONFIG_PCIE1 /* PCIE controler 1 */ | |
| 59 | #define CONFIG_PCIE2 /* PCIE controler 2 */ | |
| 60 | #define CONFIG_PCIE3 /* PCIE controler 3 */ | |
| 61 | #define CONFIG_PCIE4 /* PCIE controler 4 */ | |
| 62 | ||
| 63 | #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ | |
| 64 | #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ | |
| 65 | ||
| 66 | #define CONFIG_FSL_LAW /* Use common FSL init code */ | |
| 67 | ||
| 68 | #define CONFIG_ENV_OVERWRITE | |
| 69 | ||
| 70 | #ifdef CONFIG_SYS_NO_FLASH | |
| 71 | #define CONFIG_ENV_IS_NOWHERE | |
| 72 | #else | |
| 73 | #define CONFIG_FLASH_CFI_DRIVER | |
| 74 | #define CONFIG_SYS_FLASH_CFI | |
| 75 | #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE | |
| 76 | #endif | |
| 77 | ||
| 78 | #ifndef CONFIG_SYS_NO_FLASH | |
| 79 | #if defined(CONFIG_SPIFLASH) | |
| 80 | #define CONFIG_SYS_EXTRA_ENV_RELOC | |
| 81 | #define CONFIG_ENV_IS_IN_SPI_FLASH | |
| 062ef1a6 PJ |
82 | #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ |
| 83 | #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ | |
| 84 | #define CONFIG_ENV_SECT_SIZE 0x10000 | |
| 85 | #elif defined(CONFIG_SDCARD) | |
| 86 | #define CONFIG_SYS_EXTRA_ENV_RELOC | |
| 87 | #define CONFIG_ENV_IS_IN_MMC | |
| 88 | #define CONFIG_SYS_MMC_ENV_DEV 0 | |
| 89 | #define CONFIG_ENV_SIZE 0x2000 | |
| e222b1f3 | 90 | #define CONFIG_ENV_OFFSET (512 * 1658) |
| 062ef1a6 PJ |
91 | #elif defined(CONFIG_NAND) |
| 92 | #define CONFIG_SYS_EXTRA_ENV_RELOC | |
| 93 | #define CONFIG_ENV_IS_IN_NAND | |
| 94 | #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE | |
| e222b1f3 | 95 | #define CONFIG_ENV_OFFSET (3 * CONFIG_SYS_NAND_BLOCK_SIZE) |
| 062ef1a6 PJ |
96 | #else |
| 97 | #define CONFIG_ENV_IS_IN_FLASH | |
| 98 | #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) | |
| 99 | #define CONFIG_ENV_SIZE 0x2000 | |
| 100 | #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ | |
| 101 | #endif | |
| 102 | #else /* CONFIG_SYS_NO_FLASH */ | |
| 103 | #define CONFIG_ENV_SIZE 0x2000 | |
| 104 | #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ | |
| 105 | #endif | |
| 106 | ||
| 107 | #define CONFIG_SYS_CLK_FREQ 100000000 | |
| 108 | #define CONFIG_DDR_CLK_FREQ 66666666 | |
| 109 | ||
| 110 | /* | |
| 111 | * These can be toggled for performance analysis, otherwise use default. | |
| 112 | */ | |
| 113 | #define CONFIG_SYS_CACHE_STASHING | |
| 114 | #define CONFIG_BACKSIDE_L2_CACHE | |
| 115 | #define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E | |
| 116 | #define CONFIG_BTB /* toggle branch predition */ | |
| 117 | #define CONFIG_DDR_ECC | |
| 118 | #ifdef CONFIG_DDR_ECC | |
| 119 | #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER | |
| 120 | #define CONFIG_MEM_INIT_VALUE 0xdeadbeef | |
| 121 | #endif | |
| 122 | ||
| 123 | #define CONFIG_ENABLE_36BIT_PHYS | |
| 124 | ||
| 125 | #define CONFIG_ADDR_MAP | |
| 126 | #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ | |
| 127 | ||
| 128 | #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ | |
| 129 | #define CONFIG_SYS_MEMTEST_END 0x00400000 | |
| 130 | #define CONFIG_SYS_ALT_MEMTEST | |
| 131 | #define CONFIG_PANIC_HANG /* do not reset board on panic */ | |
| 132 | ||
| 133 | /* | |
| 134 | * Config the L3 Cache as L3 SRAM | |
| 135 | */ | |
| 136 | #define CONFIG_SYS_INIT_L3_ADDR 0xFFFC0000 | |
| 137 | ||
| 138 | #define CONFIG_SYS_DCSRBAR 0xf0000000 | |
| 139 | #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull | |
| 140 | ||
| 141 | /* | |
| 142 | * DDR Setup | |
| 143 | */ | |
| 144 | #define CONFIG_VERY_BIG_RAM | |
| 145 | #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 | |
| 146 | #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE | |
| 147 | ||
| 148 | /* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */ | |
| 149 | #define CONFIG_DIMM_SLOTS_PER_CTLR 1 | |
| 96ac18c9 | 150 | #define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) |
| 062ef1a6 PJ |
151 | |
| 152 | #define CONFIG_DDR_SPD | |
| 153 | #define CONFIG_SYS_DDR_RAW_TIMING | |
| 5614e71b | 154 | #define CONFIG_SYS_FSL_DDR3 |
| 062ef1a6 PJ |
155 | |
| 156 | #define CONFIG_SYS_SPD_BUS_NUM 0 | |
| 157 | #define SPD_EEPROM_ADDRESS 0x51 | |
| 158 | ||
| 159 | #define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ | |
| 160 | ||
| 161 | /* | |
| 162 | * IFC Definitions | |
| 163 | */ | |
| 164 | #define CONFIG_SYS_FLASH_BASE 0xe8000000 | |
| 165 | #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) | |
| 166 | ||
| 167 | #define CONFIG_SYS_NOR_CSPR_EXT (0xf) | |
| 168 | #define CONFIG_SYS_NOR_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE) | \ | |
| 169 | CSPR_PORT_SIZE_16 | \ | |
| 170 | CSPR_MSEL_NOR | \ | |
| 171 | CSPR_V) | |
| 172 | #define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) | |
| 173 | /* NOR Flash Timing Params */ | |
| 174 | #define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80 | |
| 175 | #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ | |
| 176 | FTIM0_NOR_TEADC(0x5) | \ | |
| 177 | FTIM0_NOR_TEAHC(0x5)) | |
| 178 | #define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ | |
| 179 | FTIM1_NOR_TRAD_NOR(0x1A) |\ | |
| 180 | FTIM1_NOR_TSEQRAD_NOR(0x13)) | |
| 181 | #define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ | |
| 182 | FTIM2_NOR_TCH(0x4) | \ | |
| 183 | FTIM2_NOR_TWPH(0x0E) | \ | |
| 184 | FTIM2_NOR_TWP(0x1c)) | |
| 185 | #define CONFIG_SYS_NOR_FTIM3 0x0 | |
| 186 | ||
| 187 | #define CONFIG_SYS_FLASH_QUIET_TEST | |
| 188 | #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ | |
| 189 | ||
| 190 | #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ | |
| 191 | #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ | |
| 192 | #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ | |
| 193 | #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ | |
| 194 | ||
| 195 | #define CONFIG_SYS_FLASH_EMPTY_INFO | |
| 196 | #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} | |
| 197 | ||
| 198 | /* CPLD on IFC */ | |
| 199 | #define CONFIG_SYS_CPLD_BASE 0xffdf0000 | |
| 200 | #define CONFIG_SYS_CPLD_BASE_PHYS (0xf00000000ull | CONFIG_SYS_CPLD_BASE) | |
| 9b444be3 | 201 | #define CONFIG_SYS_CSPR2_EXT (0xf) |
| 062ef1a6 PJ |
202 | #define CONFIG_SYS_CSPR2 (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \ |
| 203 | | CSPR_PORT_SIZE_8 \ | |
| 204 | | CSPR_MSEL_GPCM \ | |
| 205 | | CSPR_V) | |
| 206 | #define CONFIG_SYS_AMASK2 IFC_AMASK(64*1024) | |
| 207 | #define CONFIG_SYS_CSOR2 0x0 | |
| 208 | /* CPLD Timing parameters for IFC CS2 */ | |
| 209 | #define CONFIG_SYS_CS2_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ | |
| 210 | FTIM0_GPCM_TEADC(0x0e) | \ | |
| 211 | FTIM0_GPCM_TEAHC(0x0e)) | |
| 212 | #define CONFIG_SYS_CS2_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \ | |
| 213 | FTIM1_GPCM_TRAD(0x1f)) | |
| 214 | #define CONFIG_SYS_CS2_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ | |
| 215 | FTIM2_GPCM_TCH(0x0) | \ | |
| 216 | FTIM2_GPCM_TWP(0x1f)) | |
| 217 | #define CONFIG_SYS_CS2_FTIM3 0x0 | |
| 218 | ||
| 219 | /* NAND Flash on IFC */ | |
| 220 | #define CONFIG_NAND_FSL_IFC | |
| 221 | #define CONFIG_SYS_NAND_BASE 0xff800000 | |
| 222 | #define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE) | |
| 223 | ||
| 224 | #define CONFIG_SYS_NAND_CSPR_EXT (0xf) | |
| 225 | #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ | |
| 226 | | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ | |
| 227 | | CSPR_MSEL_NAND /* MSEL = NAND */ \ | |
| 228 | | CSPR_V) | |
| 229 | #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) | |
| 230 | ||
| 231 | #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ | |
| 232 | | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ | |
| 233 | | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ | |
| 234 | | CSOR_NAND_RAL_3 /* RAL = 3Byes */ \ | |
| 235 | | CSOR_NAND_PGS_4K /* Page Size = 4K */ \ | |
| 236 | | CSOR_NAND_SPRZ_224/* Spare size = 224 */ \ | |
| 237 | | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ | |
| 238 | ||
| 239 | #define CONFIG_SYS_NAND_ONFI_DETECTION | |
| 240 | ||
| 241 | /* ONFI NAND Flash mode0 Timing Params */ | |
| 242 | #define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \ | |
| 243 | FTIM0_NAND_TWP(0x18) | \ | |
| 244 | FTIM0_NAND_TWCHT(0x07) | \ | |
| 245 | FTIM0_NAND_TWH(0x0a)) | |
| 246 | #define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ | |
| 247 | FTIM1_NAND_TWBE(0x39) | \ | |
| 248 | FTIM1_NAND_TRR(0x0e) | \ | |
| 249 | FTIM1_NAND_TRP(0x18)) | |
| 250 | #define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ | |
| 251 | FTIM2_NAND_TREH(0x0a) | \ | |
| 252 | FTIM2_NAND_TWHRE(0x1e)) | |
| 253 | #define CONFIG_SYS_NAND_FTIM3 0x0 | |
| 254 | ||
| 255 | #define CONFIG_SYS_NAND_DDR_LAW 11 | |
| 256 | #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } | |
| 257 | #define CONFIG_SYS_MAX_NAND_DEVICE 1 | |
| 258 | #define CONFIG_MTD_NAND_VERIFY_WRITE | |
| 259 | #define CONFIG_CMD_NAND | |
| 260 | ||
| 261 | #define CONFIG_SYS_NAND_BLOCK_SIZE (512 * 1024) | |
| 262 | ||
| 263 | #if defined(CONFIG_NAND) | |
| 264 | #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT | |
| 265 | #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR | |
| 266 | #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK | |
| 267 | #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR | |
| 268 | #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 | |
| 269 | #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 | |
| 270 | #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 | |
| 271 | #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 | |
| 272 | #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR_CSPR_EXT | |
| 273 | #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR_CSPR | |
| 274 | #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK | |
| 275 | #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR | |
| 276 | #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 | |
| 277 | #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 | |
| 278 | #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 | |
| 279 | #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 | |
| 280 | #else | |
| 281 | #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR_CSPR_EXT | |
| 282 | #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR_CSPR | |
| 283 | #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK | |
| 284 | #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR | |
| 285 | #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 | |
| 286 | #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 | |
| 287 | #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 | |
| 288 | #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 | |
| 289 | #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NAND_CSPR_EXT | |
| 290 | #define CONFIG_SYS_CSPR1 CONFIG_SYS_NAND_CSPR | |
| 291 | #define CONFIG_SYS_AMASK1 CONFIG_SYS_NAND_AMASK | |
| 292 | #define CONFIG_SYS_CSOR1 CONFIG_SYS_NAND_CSOR | |
| 293 | #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NAND_FTIM0 | |
| 294 | #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1 | |
| 295 | #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2 | |
| 296 | #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3 | |
| 297 | #endif | |
| 298 | ||
| 299 | #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE | |
| 300 | ||
| 301 | #if defined(CONFIG_RAMBOOT_PBL) | |
| 302 | #define CONFIG_SYS_RAMBOOT | |
| 303 | #endif | |
| 304 | ||
| 305 | #define CONFIG_BOARD_EARLY_INIT_R | |
| 306 | #define CONFIG_MISC_INIT_R | |
| 307 | ||
| 308 | #define CONFIG_HWCONFIG | |
| 309 | ||
| 310 | /* define to use L1 as initial stack */ | |
| 311 | #define CONFIG_L1_INIT_RAM | |
| 312 | #define CONFIG_SYS_INIT_RAM_LOCK | |
| 313 | #define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ | |
| 314 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf | |
| 315 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe0ec000 | |
| 316 | /* The assembler doesn't like typecast */ | |
| 317 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ | |
| 318 | ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ | |
| 319 | CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) | |
| 320 | #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 | |
| 321 | ||
| 322 | #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ | |
| 323 | GENERATED_GBL_DATA_SIZE) | |
| 324 | #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET | |
| 325 | ||
| 326 | #define CONFIG_SYS_MONITOR_LEN (512 * 1024) | |
| 327 | #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) | |
| 328 | ||
| 329 | /* Serial Port - controlled on board with jumper J8 | |
| 330 | * open - index 2 | |
| 331 | * shorted - index 1 | |
| 332 | */ | |
| 333 | #define CONFIG_CONS_INDEX 1 | |
| 334 | #define CONFIG_SYS_NS16550 | |
| 335 | #define CONFIG_SYS_NS16550_SERIAL | |
| 336 | #define CONFIG_SYS_NS16550_REG_SIZE 1 | |
| 337 | #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) | |
| 338 | ||
| 339 | #define CONFIG_SYS_BAUDRATE_TABLE \ | |
| 340 | {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} | |
| 341 | ||
| 342 | #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) | |
| 343 | #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) | |
| 344 | #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) | |
| 345 | #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) | |
| 346 | #define CONFIG_SERIAL_MULTI /* Enable both serial ports */ | |
| 347 | #define CONFIG_SYS_CONSOLE_IS_IN_ENV /* determine from environment */ | |
| 348 | ||
| 349 | /* Use the HUSH parser */ | |
| 350 | #define CONFIG_SYS_HUSH_PARSER | |
| 351 | #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " | |
| 352 | ||
| 353 | /* pass open firmware flat tree */ | |
| 354 | #define CONFIG_OF_LIBFDT | |
| 355 | #define CONFIG_OF_BOARD_SETUP | |
| 356 | #define CONFIG_OF_STDOUT_VIA_ALIAS | |
| 357 | ||
| 358 | /* new uImage format support */ | |
| 359 | #define CONFIG_FIT | |
| 360 | #define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ | |
| 361 | ||
| 362 | /* I2C */ | |
| 363 | #define CONFIG_SYS_I2C | |
| 364 | #define CONFIG_SYS_I2C_FSL /* Use FSL common I2C driver */ | |
| 365 | #define CONFIG_SYS_FSL_I2C_SPEED 400000 /* I2C speed in Hz */ | |
| 366 | #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F | |
| 367 | #define CONFIG_SYS_FSL_I2C2_SPEED 400000 /* I2C speed in Hz */ | |
| 368 | #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F | |
| 369 | #define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 | |
| 370 | #define CONFIG_SYS_FSL_I2C2_OFFSET 0x119000 | |
| 371 | ||
| 372 | /* I2C bus multiplexer */ | |
| 373 | #define I2C_MUX_PCA_ADDR 0x70 | |
| 374 | #define I2C_MUX_CH_DEFAULT 0x8 | |
| 375 | ||
| 376 | ||
| 377 | /* | |
| 378 | * eSPI - Enhanced SPI | |
| 379 | */ | |
| 380 | #define CONFIG_FSL_ESPI | |
| 381 | #define CONFIG_SPI_FLASH | |
| 382 | #define CONFIG_SPI_FLASH_STMICRO | |
| 383 | #define CONFIG_CMD_SF | |
| 384 | #define CONFIG_SF_DEFAULT_SPEED 10000000 | |
| 385 | #define CONFIG_SF_DEFAULT_MODE 0 | |
| 9b444be3 PJ |
386 | #define CONFIG_ENV_SPI_BUS 0 |
| 387 | #define CONFIG_ENV_SPI_CS 0 | |
| 388 | #define CONFIG_ENV_SPI_MAX_HZ 10000000 | |
| 389 | #define CONFIG_ENV_SPI_MODE 0 | |
| 062ef1a6 PJ |
390 | |
| 391 | /* | |
| 392 | * General PCI | |
| 393 | * Memory space is mapped 1-1, but I/O space must start from 0. | |
| 394 | */ | |
| 395 | ||
| 396 | #ifdef CONFIG_PCI | |
| 397 | /* controller 1, direct to uli, tgtid 3, Base address 20000 */ | |
| 398 | #ifdef CONFIG_PCIE1 | |
| 399 | #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 | |
| 400 | #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 | |
| 401 | #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull | |
| 402 | #define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000 /* 256M */ | |
| 403 | #define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 | |
| 404 | #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 | |
| 405 | #define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull | |
| 406 | #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ | |
| 407 | #endif | |
| 408 | ||
| 409 | /* controller 2, Slot 2, tgtid 2, Base address 201000 */ | |
| 410 | #ifdef CONFIG_PCIE2 | |
| 411 | #define CONFIG_SYS_PCIE2_MEM_VIRT 0x90000000 | |
| 412 | #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 | |
| 413 | #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc10000000ull | |
| 414 | #define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000 /* 256M */ | |
| 415 | #define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 | |
| 416 | #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 | |
| 417 | #define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull | |
| 418 | #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ | |
| 419 | #endif | |
| 420 | ||
| 421 | /* controller 3, Slot 1, tgtid 1, Base address 202000 */ | |
| 422 | #ifdef CONFIG_PCIE3 | |
| 423 | #define CONFIG_SYS_PCIE3_MEM_VIRT 0xa0000000 | |
| 424 | #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 | |
| 425 | #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc20000000ull | |
| 426 | #define CONFIG_SYS_PCIE3_MEM_SIZE 0x10000000 /* 256M */ | |
| 427 | #define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 | |
| 428 | #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 | |
| 429 | #define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull | |
| 430 | #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ | |
| 431 | #endif | |
| 432 | ||
| 433 | /* controller 4, Base address 203000 */ | |
| 434 | #ifdef CONFIG_PCIE4 | |
| 435 | #define CONFIG_SYS_PCIE4_MEM_VIRT 0xb0000000 | |
| 436 | #define CONFIG_SYS_PCIE4_MEM_BUS 0xe0000000 | |
| 437 | #define CONFIG_SYS_PCIE4_MEM_PHYS 0xc30000000ull | |
| 438 | #define CONFIG_SYS_PCIE4_MEM_SIZE 0x10000000 /* 256M */ | |
| 439 | #define CONFIG_SYS_PCIE4_IO_VIRT 0xf8030000 | |
| 440 | #define CONFIG_SYS_PCIE4_IO_BUS 0x00000000 | |
| 441 | #define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull | |
| 442 | #define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */ | |
| 443 | #endif | |
| 444 | ||
| 445 | #define CONFIG_PCI_PNP /* do pci plug-and-play */ | |
| 446 | #define CONFIG_E1000 | |
| 447 | ||
| 448 | #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ | |
| 449 | #define CONFIG_DOS_PARTITION | |
| 450 | #endif /* CONFIG_PCI */ | |
| 451 | ||
| 452 | /* SATA */ | |
| 453 | #define CONFIG_FSL_SATA_V2 | |
| 454 | #ifdef CONFIG_FSL_SATA_V2 | |
| 455 | #define CONFIG_LIBATA | |
| 456 | #define CONFIG_FSL_SATA | |
| 457 | ||
| 458 | #define CONFIG_SYS_SATA_MAX_DEVICE 1 | |
| 459 | #define CONFIG_SATA1 | |
| 460 | #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR | |
| 461 | #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA | |
| 462 | ||
| 463 | #define CONFIG_LBA48 | |
| 464 | #define CONFIG_CMD_SATA | |
| 465 | #define CONFIG_DOS_PARTITION | |
| 466 | #define CONFIG_CMD_EXT2 | |
| 467 | #endif | |
| 468 | ||
| 469 | /* | |
| 470 | * USB | |
| 471 | */ | |
| 472 | #define CONFIG_HAS_FSL_DR_USB | |
| 473 | ||
| 474 | #ifdef CONFIG_HAS_FSL_DR_USB | |
| 475 | #define CONFIG_USB_EHCI | |
| 476 | ||
| 477 | #ifdef CONFIG_USB_EHCI | |
| 478 | #define CONFIG_CMD_USB | |
| 479 | #define CONFIG_USB_STORAGE | |
| 480 | #define CONFIG_USB_EHCI_FSL | |
| 481 | #define CONFIG_EHCI_HCD_INIT_AFTER_RESET | |
| 482 | #define CONFIG_CMD_EXT2 | |
| 483 | #endif | |
| 484 | #endif | |
| 485 | ||
| 486 | #define CONFIG_MMC | |
| 487 | ||
| 488 | #ifdef CONFIG_MMC | |
| 489 | #define CONFIG_FSL_ESDHC | |
| 490 | #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR | |
| 491 | #define CONFIG_CMD_MMC | |
| 492 | #define CONFIG_GENERIC_MMC | |
| 493 | #define CONFIG_CMD_EXT2 | |
| 494 | #define CONFIG_CMD_FAT | |
| 495 | #define CONFIG_DOS_PARTITION | |
| 496 | #endif | |
| 497 | ||
| 498 | /* Qman/Bman */ | |
| 499 | #ifndef CONFIG_NOBQFMAN | |
| 500 | #define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ | |
| 501 | #define CONFIG_SYS_BMAN_NUM_PORTALS 25 | |
| 502 | #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 | |
| 503 | #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull | |
| 504 | #define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 | |
| 505 | #define CONFIG_SYS_QMAN_NUM_PORTALS 25 | |
| 506 | #define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 | |
| 507 | #define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull | |
| 508 | #define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 | |
| 509 | ||
| 510 | #define CONFIG_SYS_DPAA_FMAN | |
| 511 | #define CONFIG_SYS_DPAA_PME | |
| 512 | ||
| 513 | /* Default address of microcode for the Linux Fman driver */ | |
| 514 | #if defined(CONFIG_SPIFLASH) | |
| 515 | /* | |
| 516 | * env is stored at 0x100000, sector size is 0x10000, ucode is stored after | |
| 517 | * env, so we got 0x110000. | |
| 518 | */ | |
| 519 | #define CONFIG_SYS_QE_FW_IN_SPIFLASH | |
| 520 | #define CONFIG_SYS_QE_FMAN_FW_ADDR 0x110000 | |
| 521 | #elif defined(CONFIG_SDCARD) | |
| 522 | /* | |
| 523 | * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is | |
| e222b1f3 PK |
524 | * about 825KB (1650 blocks), Env is stored after the image, and the env size is |
| 525 | * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680. | |
| 062ef1a6 PJ |
526 | */ |
| 527 | #define CONFIG_SYS_QE_FMAN_FW_IN_MMC | |
| e222b1f3 | 528 | #define CONFIG_SYS_QE_FMAN_FW_ADDR (512 * 1680) |
| 062ef1a6 PJ |
529 | #elif defined(CONFIG_NAND) |
| 530 | #define CONFIG_SYS_QE_FMAN_FW_IN_NAND | |
| e222b1f3 | 531 | #define CONFIG_SYS_QE_FMAN_FW_ADDR (4 * CONFIG_SYS_NAND_BLOCK_SIZE) |
| 062ef1a6 PJ |
532 | #else |
| 533 | #define CONFIG_SYS_QE_FMAN_FW_IN_NOR | |
| e222b1f3 | 534 | #define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF00000 |
| 062ef1a6 PJ |
535 | #endif |
| 536 | #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 | |
| 537 | #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) | |
| 538 | #endif /* CONFIG_NOBQFMAN */ | |
| 539 | ||
| 540 | #ifdef CONFIG_SYS_DPAA_FMAN | |
| 541 | #define CONFIG_FMAN_ENET | |
| 542 | #define CONFIG_PHY_VITESSE | |
| 543 | #define CONFIG_PHY_REALTEK | |
| 544 | #endif | |
| 545 | ||
| 546 | #ifdef CONFIG_FMAN_ENET | |
| 714fd406 PJ |
547 | #define CONFIG_SYS_SGMII1_PHY_ADDR 0x03 |
| 548 | #define CONFIG_SYS_RGMII1_PHY_ADDR 0x01 | |
| 549 | #define CONFIG_SYS_RGMII2_PHY_ADDR 0x02 | |
| 062ef1a6 PJ |
550 | |
| 551 | #define CONFIG_MII /* MII PHY management */ | |
| 714fd406 | 552 | #define CONFIG_ETHPRIME "FM1@DTSEC4" |
| 062ef1a6 PJ |
553 | #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ |
| 554 | #endif | |
| 555 | ||
| 556 | /* | |
| 557 | * Environment | |
| 558 | */ | |
| 559 | #define CONFIG_LOADS_ECHO /* echo on for serial download */ | |
| 560 | #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ | |
| 561 | ||
| 562 | /* | |
| 563 | * Command line configuration. | |
| 564 | */ | |
| 565 | #include <config_cmd_default.h> | |
| 566 | ||
| 567 | #define CONFIG_CMD_DHCP | |
| 568 | #define CONFIG_CMD_ELF | |
| 569 | #define CONFIG_CMD_ERRATA | |
| 570 | #define CONFIG_CMD_GREPENV | |
| 571 | #define CONFIG_CMD_IRQ | |
| 572 | #define CONFIG_CMD_I2C | |
| 573 | #define CONFIG_CMD_MII | |
| 574 | #define CONFIG_CMD_PING | |
| 575 | #define CONFIG_CMD_REGINFO | |
| 576 | #define CONFIG_CMD_SETEXPR | |
| 577 | ||
| 578 | #ifdef CONFIG_PCI | |
| 579 | #define CONFIG_CMD_PCI | |
| 580 | #define CONFIG_CMD_NET | |
| 581 | #endif | |
| 582 | ||
| 583 | /* | |
| 584 | * Miscellaneous configurable options | |
| 585 | */ | |
| 586 | #define CONFIG_SYS_LONGHELP /* undef to save memory */ | |
| 587 | #define CONFIG_CMDLINE_EDITING /* Command-line editing */ | |
| 588 | #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ | |
| 589 | #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ | |
| 590 | #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ | |
| 591 | #ifdef CONFIG_CMD_KGDB | |
| 592 | #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ | |
| 593 | #else | |
| 594 | #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ | |
| 595 | #endif | |
| 596 | #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) | |
| 597 | #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ | |
| 598 | #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ | |
| 062ef1a6 PJ |
599 | |
| 600 | /* | |
| 601 | * For booting Linux, the board info and command line data | |
| 602 | * have to be in the first 64 MB of memory, since this is | |
| 603 | * the maximum mapped by the Linux kernel during initialization. | |
| 604 | */ | |
| 605 | #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ | |
| 606 | #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ | |
| 607 | ||
| 608 | #ifdef CONFIG_CMD_KGDB | |
| 609 | #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ | |
| 062ef1a6 PJ |
610 | #endif |
| 611 | ||
| 612 | /* | |
| 613 | * Environment Configuration | |
| 614 | */ | |
| 615 | #define CONFIG_ROOTPATH "/opt/nfsroot" | |
| 616 | #define CONFIG_BOOTFILE "uImage" | |
| 617 | #define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server*/ | |
| 618 | ||
| 619 | /* default location for tftp and bootm */ | |
| 620 | #define CONFIG_LOADADDR 1000000 | |
| 621 | ||
| 622 | #define CONFIG_BOOTDELAY 10 /*-1 disables auto-boot*/ | |
| 623 | ||
| 624 | #define CONFIG_BAUDRATE 115200 | |
| 625 | ||
| 626 | #define __USB_PHY_TYPE utmi | |
| 627 | ||
| 628 | #define CONFIG_EXTRA_ENV_SETTINGS \ | |
| 9b444be3 PJ |
629 | "hwconfig=fsl_ddr:bank_intlv=cs0_cs1;" \ |
| 630 | "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\ | |
| 631 | "usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ | |
| 062ef1a6 PJ |
632 | "netdev=eth0\0" \ |
| 633 | "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ | |
| 634 | "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ | |
| 635 | "tftpflash=tftpboot $loadaddr $uboot && " \ | |
| 636 | "protect off $ubootaddr +$filesize && " \ | |
| 637 | "erase $ubootaddr +$filesize && " \ | |
| 638 | "cp.b $loadaddr $ubootaddr $filesize && " \ | |
| 639 | "protect on $ubootaddr +$filesize && " \ | |
| 640 | "cmp.b $loadaddr $ubootaddr $filesize\0" \ | |
| 641 | "consoledev=ttyS0\0" \ | |
| 642 | "ramdiskaddr=2000000\0" \ | |
| 643 | "ramdiskfile=t1040rdb/ramdisk.uboot\0" \ | |
| 644 | "fdtaddr=c00000\0" \ | |
| 645 | "fdtfile=t1040rdb/t1040rdb.dtb\0" \ | |
| 646 | "bdev=sda3\0" \ | |
| 647 | "c=ffe\0" | |
| 648 | ||
| 649 | #define CONFIG_LINUX \ | |
| 650 | "setenv bootargs root=/dev/ram rw " \ | |
| 651 | "console=$consoledev,$baudrate $othbootargs;" \ | |
| 652 | "setenv ramdiskaddr 0x02000000;" \ | |
| 653 | "setenv fdtaddr 0x00c00000;" \ | |
| 654 | "setenv loadaddr 0x1000000;" \ | |
| 655 | "bootm $loadaddr $ramdiskaddr $fdtaddr" | |
| 656 | ||
| 657 | #define CONFIG_HDBOOT \ | |
| 658 | "setenv bootargs root=/dev/$bdev rw " \ | |
| 659 | "console=$consoledev,$baudrate $othbootargs;" \ | |
| 660 | "tftp $loadaddr $bootfile;" \ | |
| 661 | "tftp $fdtaddr $fdtfile;" \ | |
| 662 | "bootm $loadaddr - $fdtaddr" | |
| 663 | ||
| 664 | #define CONFIG_NFSBOOTCOMMAND \ | |
| 665 | "setenv bootargs root=/dev/nfs rw " \ | |
| 666 | "nfsroot=$serverip:$rootpath " \ | |
| 667 | "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ | |
| 668 | "console=$consoledev,$baudrate $othbootargs;" \ | |
| 669 | "tftp $loadaddr $bootfile;" \ | |
| 670 | "tftp $fdtaddr $fdtfile;" \ | |
| 671 | "bootm $loadaddr - $fdtaddr" | |
| 672 | ||
| 673 | #define CONFIG_RAMBOOTCOMMAND \ | |
| 674 | "setenv bootargs root=/dev/ram rw " \ | |
| 675 | "console=$consoledev,$baudrate $othbootargs;" \ | |
| 676 | "tftp $ramdiskaddr $ramdiskfile;" \ | |
| 677 | "tftp $loadaddr $bootfile;" \ | |
| 678 | "tftp $fdtaddr $fdtfile;" \ | |
| 679 | "bootm $loadaddr $ramdiskaddr $fdtaddr" | |
| 680 | ||
| 681 | #define CONFIG_BOOTCOMMAND CONFIG_LINUX | |
| 682 | ||
| 683 | #ifdef CONFIG_SECURE_BOOT | |
| 684 | #include <asm/fsl_secure_boot.h> | |
| 685 | #endif | |
| 686 | ||
| 687 | #endif /* __CONFIG_H */ |