]>
Commit | Line | Data |
---|---|---|
8d67c368 SL |
1 | /* |
2 | * Copyright 2014 Freescale Semiconductor, Inc. | |
3 | * | |
4 | * SPDX-License-Identifier: GPL-2.0+ | |
5 | */ | |
6 | ||
7 | /* | |
8 | * T2080 RDB/PCIe board configuration file | |
9 | */ | |
10 | ||
11 | #ifndef __T2080RDB_H | |
12 | #define __T2080RDB_H | |
13 | ||
14 | #define CONFIG_T2080RDB | |
15 | #define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */ | |
16 | #define CONFIG_MMC | |
17 | #define CONFIG_SPI_FLASH | |
18 | #define CONFIG_USB_EHCI | |
19 | #define CONFIG_FSL_SATA_V2 | |
20 | ||
21 | /* High Level Configuration Options */ | |
22 | #define CONFIG_PHYS_64BIT | |
23 | #define CONFIG_BOOKE | |
24 | #define CONFIG_E500 /* BOOKE e500 family */ | |
25 | #define CONFIG_E500MC /* BOOKE e500mc family */ | |
26 | #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ | |
27 | #define CONFIG_MP /* support multiple processors */ | |
28 | #define CONFIG_ENABLE_36BIT_PHYS | |
29 | ||
30 | #ifdef CONFIG_PHYS_64BIT | |
31 | #define CONFIG_ADDR_MAP 1 | |
32 | #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ | |
33 | #endif | |
34 | ||
35 | #define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ | |
36 | #define CONFIG_SYS_NUM_CPC CONFIG_NUM_DDR_CONTROLLERS | |
37 | #define CONFIG_FSL_IFC /* Enable IFC Support */ | |
38 | #define CONFIG_FSL_LAW /* Use common FSL init code */ | |
39 | #define CONFIG_ENV_OVERWRITE | |
40 | ||
41 | #ifdef CONFIG_RAMBOOT_PBL | |
42 | #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE | |
43 | #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc | |
e4536f8e MY |
44 | #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t208xrdb/t2080_pbi.cfg |
45 | #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xrdb/t2080_rcw.cfg | |
8d67c368 SL |
46 | #endif |
47 | ||
48 | #define CONFIG_SRIO_PCIE_BOOT_MASTER | |
49 | #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE | |
50 | /* Set 1M boot space */ | |
51 | #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000) | |
52 | #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \ | |
53 | (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR) | |
54 | #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc | |
55 | #define CONFIG_SYS_NO_FLASH | |
56 | #endif | |
57 | ||
58 | #ifndef CONFIG_SYS_TEXT_BASE | |
59 | #define CONFIG_SYS_TEXT_BASE 0xeff40000 | |
60 | #endif | |
61 | ||
62 | #ifndef CONFIG_RESET_VECTOR_ADDRESS | |
63 | #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc | |
64 | #endif | |
65 | ||
66 | /* | |
67 | * These can be toggled for performance analysis, otherwise use default. | |
68 | */ | |
69 | #define CONFIG_SYS_CACHE_STASHING | |
70 | #define CONFIG_BTB /* toggle branch predition */ | |
71 | #define CONFIG_DDR_ECC | |
72 | #ifdef CONFIG_DDR_ECC | |
73 | #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER | |
74 | #define CONFIG_MEM_INIT_VALUE 0xdeadbeef | |
75 | #endif | |
76 | ||
77 | #ifdef CONFIG_SYS_NO_FLASH | |
78 | #if !defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) && !defined(CONFIG_RAMBOOT_PBL) | |
79 | #define CONFIG_ENV_IS_NOWHERE | |
80 | #endif | |
81 | #else | |
82 | #define CONFIG_FLASH_CFI_DRIVER | |
83 | #define CONFIG_SYS_FLASH_CFI | |
84 | #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE | |
85 | #endif | |
86 | ||
87 | #if defined(CONFIG_SPIFLASH) | |
88 | #define CONFIG_SYS_EXTRA_ENV_RELOC | |
89 | #define CONFIG_ENV_IS_IN_SPI_FLASH | |
90 | #define CONFIG_ENV_SPI_BUS 0 | |
91 | #define CONFIG_ENV_SPI_CS 0 | |
92 | #define CONFIG_ENV_SPI_MAX_HZ 10000000 | |
93 | #define CONFIG_ENV_SPI_MODE 0 | |
94 | #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ | |
95 | #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ | |
96 | #define CONFIG_ENV_SECT_SIZE 0x10000 | |
97 | #elif defined(CONFIG_SDCARD) | |
98 | #define CONFIG_SYS_EXTRA_ENV_RELOC | |
99 | #define CONFIG_ENV_IS_IN_MMC | |
100 | #define CONFIG_SYS_MMC_ENV_DEV 0 | |
101 | #define CONFIG_ENV_SIZE 0x2000 | |
102 | #define CONFIG_ENV_OFFSET (512 * 1658) | |
103 | #elif defined(CONFIG_NAND) | |
104 | #define CONFIG_SYS_EXTRA_ENV_RELOC | |
105 | #define CONFIG_ENV_IS_IN_NAND | |
106 | #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE | |
107 | #define CONFIG_ENV_OFFSET (2 * CONFIG_SYS_NAND_BLOCK_SIZE) | |
108 | #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) | |
109 | #define CONFIG_ENV_IS_IN_REMOTE | |
110 | #define CONFIG_ENV_ADDR 0xffe20000 | |
111 | #define CONFIG_ENV_SIZE 0x2000 | |
112 | #elif defined(CONFIG_ENV_IS_NOWHERE) | |
113 | #define CONFIG_ENV_SIZE 0x2000 | |
114 | #else | |
115 | #define CONFIG_ENV_IS_IN_FLASH | |
116 | #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) | |
117 | #define CONFIG_ENV_SIZE 0x2000 | |
118 | #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ | |
119 | #endif | |
120 | ||
121 | #ifndef __ASSEMBLY__ | |
122 | unsigned long get_board_sys_clk(void); | |
123 | unsigned long get_board_ddr_clk(void); | |
124 | #endif | |
125 | ||
126 | #define CONFIG_SYS_CLK_FREQ 66660000 | |
127 | #define CONFIG_DDR_CLK_FREQ 133330000 | |
128 | ||
129 | /* | |
130 | * Config the L3 Cache as L3 SRAM | |
131 | */ | |
132 | #define CONFIG_SYS_INIT_L3_ADDR CONFIG_RAMBOOT_TEXT_BASE | |
133 | ||
134 | #define CONFIG_SYS_DCSRBAR 0xf0000000 | |
135 | #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull | |
136 | ||
137 | /* EEPROM */ | |
138 | #define CONFIG_ID_EEPROM | |
139 | #define CONFIG_SYS_I2C_EEPROM_NXID | |
140 | #define CONFIG_SYS_EEPROM_BUS_NUM 0 | |
141 | #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 | |
142 | #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 | |
143 | ||
144 | /* | |
145 | * DDR Setup | |
146 | */ | |
147 | #define CONFIG_VERY_BIG_RAM | |
148 | #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 | |
149 | #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE | |
150 | #define CONFIG_DIMM_SLOTS_PER_CTLR 1 | |
151 | #define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR) | |
152 | #define CONFIG_DDR_SPD | |
153 | #define CONFIG_SYS_FSL_DDR3 | |
154 | #undef CONFIG_FSL_DDR_INTERACTIVE | |
155 | #define CONFIG_SYS_SPD_BUS_NUM 0 | |
156 | #define CONFIG_SYS_SDRAM_SIZE 2048 /* for fixed parameter use */ | |
157 | #define SPD_EEPROM_ADDRESS1 0x51 | |
158 | #define SPD_EEPROM_ADDRESS2 0x52 | |
159 | #define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 | |
160 | #define CTRL_INTLV_PREFERED cacheline | |
161 | ||
162 | /* | |
163 | * IFC Definitions | |
164 | */ | |
165 | #define CONFIG_SYS_FLASH_BASE 0xe8000000 | |
166 | #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) | |
167 | #define CONFIG_SYS_NOR0_CSPR_EXT (0xf) | |
168 | #define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ | |
169 | CSPR_PORT_SIZE_16 | \ | |
170 | CSPR_MSEL_NOR | \ | |
171 | CSPR_V) | |
172 | #define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) | |
173 | ||
174 | /* NOR Flash Timing Params */ | |
175 | #define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80 | |
176 | ||
177 | #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ | |
178 | FTIM0_NOR_TEADC(0x5) | \ | |
179 | FTIM0_NOR_TEAHC(0x5)) | |
180 | #define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ | |
181 | FTIM1_NOR_TRAD_NOR(0x1A) |\ | |
182 | FTIM1_NOR_TSEQRAD_NOR(0x13)) | |
183 | #define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ | |
184 | FTIM2_NOR_TCH(0x4) | \ | |
185 | FTIM2_NOR_TWPH(0x0E) | \ | |
186 | FTIM2_NOR_TWP(0x1c)) | |
187 | #define CONFIG_SYS_NOR_FTIM3 0x0 | |
188 | ||
189 | #define CONFIG_SYS_FLASH_QUIET_TEST | |
190 | #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ | |
191 | ||
192 | #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ | |
193 | #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ | |
194 | #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ | |
195 | #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ | |
196 | #define CONFIG_SYS_FLASH_EMPTY_INFO | |
197 | #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS } | |
198 | ||
199 | /* CPLD on IFC */ | |
200 | #define CONFIG_SYS_CPLD_BASE 0xffdf0000 | |
201 | #define CONFIG_SYS_CPLD_BASE_PHYS (0xf00000000ull | CONFIG_SYS_CPLD_BASE) | |
202 | #define CONFIG_SYS_CSPR2_EXT (0xf) | |
203 | #define CONFIG_SYS_CSPR2 (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE) \ | |
204 | | CSPR_PORT_SIZE_8 \ | |
205 | | CSPR_MSEL_GPCM \ | |
206 | | CSPR_V) | |
207 | #define CONFIG_SYS_AMASK2 IFC_AMASK(64*1024) | |
208 | #define CONFIG_SYS_CSOR2 0x0 | |
209 | ||
210 | /* CPLD Timing parameters for IFC CS2 */ | |
211 | #define CONFIG_SYS_CS2_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ | |
212 | FTIM0_GPCM_TEADC(0x0e) | \ | |
213 | FTIM0_GPCM_TEAHC(0x0e)) | |
214 | #define CONFIG_SYS_CS2_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \ | |
215 | FTIM1_GPCM_TRAD(0x1f)) | |
216 | #define CONFIG_SYS_CS2_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ | |
217 | FTIM2_GPCM_TCH(0x0) | \ | |
218 | FTIM2_GPCM_TWP(0x1f)) | |
219 | #define CONFIG_SYS_CS2_FTIM3 0x0 | |
220 | ||
221 | /* NAND Flash on IFC */ | |
222 | #define CONFIG_NAND_FSL_IFC | |
223 | #define CONFIG_SYS_NAND_BASE 0xff800000 | |
224 | #define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE) | |
225 | ||
226 | #define CONFIG_SYS_NAND_CSPR_EXT (0xf) | |
227 | #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ | |
228 | | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ | |
229 | | CSPR_MSEL_NAND /* MSEL = NAND */ \ | |
230 | | CSPR_V) | |
231 | #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) | |
232 | ||
233 | #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ | |
234 | | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ | |
235 | | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ | |
236 | | CSOR_NAND_RAL_3 /* RAL = 2Byes */ \ | |
237 | | CSOR_NAND_PGS_2K /* Page Size = 2K */\ | |
238 | | CSOR_NAND_SPRZ_64 /* Spare size = 64 */\ | |
239 | | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ | |
240 | ||
241 | #define CONFIG_SYS_NAND_ONFI_DETECTION | |
242 | ||
243 | /* ONFI NAND Flash mode0 Timing Params */ | |
244 | #define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \ | |
245 | FTIM0_NAND_TWP(0x18) | \ | |
246 | FTIM0_NAND_TWCHT(0x07) | \ | |
247 | FTIM0_NAND_TWH(0x0a)) | |
248 | #define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ | |
249 | FTIM1_NAND_TWBE(0x39) | \ | |
250 | FTIM1_NAND_TRR(0x0e) | \ | |
251 | FTIM1_NAND_TRP(0x18)) | |
252 | #define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ | |
253 | FTIM2_NAND_TREH(0x0a) | \ | |
254 | FTIM2_NAND_TWHRE(0x1e)) | |
255 | #define CONFIG_SYS_NAND_FTIM3 0x0 | |
256 | ||
257 | #define CONFIG_SYS_NAND_DDR_LAW 11 | |
258 | #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } | |
259 | #define CONFIG_SYS_MAX_NAND_DEVICE 1 | |
260 | #define CONFIG_MTD_NAND_VERIFY_WRITE | |
261 | #define CONFIG_CMD_NAND | |
262 | #define CONFIG_SYS_NAND_BLOCK_SIZE (512 * 1024) | |
263 | ||
264 | #if defined(CONFIG_NAND) | |
265 | #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT | |
266 | #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR | |
267 | #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK | |
268 | #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR | |
269 | #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 | |
270 | #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 | |
271 | #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 | |
272 | #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 | |
273 | #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR0_CSPR_EXT | |
274 | #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR0_CSPR | |
275 | #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK | |
276 | #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR | |
277 | #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 | |
278 | #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 | |
279 | #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 | |
280 | #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 | |
281 | #else | |
282 | #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT | |
283 | #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR | |
284 | #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK | |
285 | #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR | |
286 | #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 | |
287 | #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 | |
288 | #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 | |
289 | #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 | |
290 | #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NAND_CSPR_EXT | |
291 | #define CONFIG_SYS_CSPR1 CONFIG_SYS_NAND_CSPR | |
292 | #define CONFIG_SYS_AMASK1 CONFIG_SYS_NAND_AMASK | |
293 | #define CONFIG_SYS_CSOR1 CONFIG_SYS_NAND_CSOR | |
294 | #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NAND_FTIM0 | |
295 | #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1 | |
296 | #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2 | |
297 | #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3 | |
298 | #endif | |
299 | ||
300 | #if defined(CONFIG_RAMBOOT_PBL) | |
301 | #define CONFIG_SYS_RAMBOOT | |
302 | #endif | |
303 | ||
304 | #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE | |
305 | #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ | |
306 | #define CONFIG_MISC_INIT_R | |
307 | #define CONFIG_HWCONFIG | |
308 | ||
309 | /* define to use L1 as initial stack */ | |
310 | #define CONFIG_L1_INIT_RAM | |
311 | #define CONFIG_SYS_INIT_RAM_LOCK | |
312 | #define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ | |
313 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf | |
314 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe0ec000 | |
315 | /* The assembler doesn't like typecast */ | |
316 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ | |
317 | ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ | |
318 | CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) | |
319 | #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 | |
320 | #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ | |
321 | GENERATED_GBL_DATA_SIZE) | |
322 | #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET | |
323 | #define CONFIG_SYS_MONITOR_LEN (512 * 1024) | |
324 | #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) | |
325 | ||
326 | /* | |
327 | * Serial Port | |
328 | */ | |
329 | #define CONFIG_CONS_INDEX 1 | |
330 | #define CONFIG_SYS_NS16550 | |
331 | #define CONFIG_SYS_NS16550_SERIAL | |
332 | #define CONFIG_SYS_NS16550_REG_SIZE 1 | |
333 | #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) | |
334 | #define CONFIG_SYS_BAUDRATE_TABLE \ | |
335 | {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} | |
336 | #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) | |
337 | #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) | |
338 | #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) | |
339 | #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) | |
340 | ||
341 | /* Use the HUSH parser */ | |
342 | #define CONFIG_SYS_HUSH_PARSER | |
343 | #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " | |
344 | ||
345 | /* pass open firmware flat tree */ | |
346 | #define CONFIG_OF_LIBFDT | |
347 | #define CONFIG_OF_BOARD_SETUP | |
348 | #define CONFIG_OF_STDOUT_VIA_ALIAS | |
349 | ||
350 | /* new uImage format support */ | |
351 | #define CONFIG_FIT | |
352 | #define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ | |
353 | ||
354 | /* | |
355 | * I2C | |
356 | */ | |
357 | #define CONFIG_SYS_I2C | |
358 | #define CONFIG_SYS_I2C_FSL | |
359 | #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F | |
360 | #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F | |
361 | #define CONFIG_SYS_FSL_I2C3_SLAVE 0x7F | |
362 | #define CONFIG_SYS_FSL_I2C4_SLAVE 0x7F | |
363 | #define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 | |
364 | #define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100 | |
365 | #define CONFIG_SYS_FSL_I2C3_OFFSET 0x119000 | |
366 | #define CONFIG_SYS_FSL_I2C4_OFFSET 0x119100 | |
367 | #define CONFIG_SYS_FSL_I2C_SPEED 100000 | |
368 | #define CONFIG_SYS_FSL_I2C2_SPEED 100000 | |
369 | #define CONFIG_SYS_FSL_I2C3_SPEED 100000 | |
370 | #define CONFIG_SYS_FSL_I2C4_SPEED 100000 | |
371 | #define I2C_MUX_PCA_ADDR_PRI 0x77 /* I2C bus multiplexer,primary */ | |
372 | #define I2C_MUX_PCA_ADDR_SEC1 0x75 /* I2C bus multiplexer,secondary 1 */ | |
373 | #define I2C_MUX_PCA_ADDR_SEC2 0x76 /* I2C bus multiplexer,secondary 2 */ | |
374 | #define I2C_MUX_CH_DEFAULT 0x8 | |
375 | ||
376 | ||
377 | /* | |
378 | * RapidIO | |
379 | */ | |
380 | #define CONFIG_SYS_SRIO1_MEM_VIRT 0xa0000000 | |
381 | #define CONFIG_SYS_SRIO1_MEM_PHYS 0xc20000000ull | |
382 | #define CONFIG_SYS_SRIO1_MEM_SIZE 0x10000000 /* 256M */ | |
383 | #define CONFIG_SYS_SRIO2_MEM_VIRT 0xb0000000 | |
384 | #define CONFIG_SYS_SRIO2_MEM_PHYS 0xc30000000ull | |
385 | #define CONFIG_SYS_SRIO2_MEM_SIZE 0x10000000 /* 256M */ | |
386 | /* | |
387 | * for slave u-boot IMAGE instored in master memory space, | |
388 | * PHYS must be aligned based on the SIZE | |
389 | */ | |
390 | #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef080000ull | |
391 | #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff80000ull | |
392 | #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x80000 /* 512K */ | |
393 | #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff80000ull | |
394 | /* | |
395 | * for slave UCODE and ENV instored in master memory space, | |
396 | * PHYS must be aligned based on the SIZE | |
397 | */ | |
398 | #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef040000ull | |
399 | #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull | |
400 | #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000 /* 256K */ | |
401 | ||
402 | /* slave core release by master*/ | |
403 | #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4 | |
404 | #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */ | |
405 | ||
406 | /* | |
407 | * SRIO_PCIE_BOOT - SLAVE | |
408 | */ | |
409 | #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE | |
410 | #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000 | |
411 | #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \ | |
412 | (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR) | |
413 | #endif | |
414 | ||
415 | /* | |
416 | * eSPI - Enhanced SPI | |
417 | */ | |
418 | #ifdef CONFIG_SPI_FLASH | |
419 | #define CONFIG_FSL_ESPI | |
420 | #define CONFIG_SPI_FLASH_STMICRO | |
421 | #define CONFIG_SPI_FLASH_BAR | |
422 | #define CONFIG_CMD_SF | |
423 | #define CONFIG_SF_DEFAULT_SPEED 10000000 | |
424 | #define CONFIG_SF_DEFAULT_MODE 0 | |
425 | #endif | |
426 | ||
427 | /* | |
428 | * General PCI | |
429 | * Memory space is mapped 1-1, but I/O space must start from 0. | |
430 | */ | |
431 | #define CONFIG_PCI /* Enable PCI/PCIE */ | |
432 | #define CONFIG_PCIE1 /* PCIE controler 1 */ | |
433 | #define CONFIG_PCIE2 /* PCIE controler 2 */ | |
434 | #define CONFIG_PCIE3 /* PCIE controler 3 */ | |
435 | #define CONFIG_PCIE4 /* PCIE controler 4 */ | |
436 | #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ | |
437 | #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ | |
438 | /* controller 1, direct to uli, tgtid 3, Base address 20000 */ | |
439 | #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 | |
440 | #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 | |
441 | #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull | |
442 | #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ | |
443 | #define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 | |
444 | #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 | |
445 | #define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull | |
446 | #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ | |
447 | ||
448 | /* controller 2, Slot 2, tgtid 2, Base address 201000 */ | |
449 | #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 | |
450 | #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 | |
451 | #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull | |
452 | #define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000 /* 256M */ | |
453 | #define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 | |
454 | #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 | |
455 | #define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull | |
456 | #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ | |
457 | ||
458 | /* controller 3, Slot 1, tgtid 1, Base address 202000 */ | |
459 | #define CONFIG_SYS_PCIE3_MEM_VIRT 0xb0000000 | |
460 | #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 | |
461 | #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc30000000ull | |
462 | #define CONFIG_SYS_PCIE3_MEM_SIZE 0x10000000 /* 256M */ | |
463 | #define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 | |
464 | #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 | |
465 | #define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull | |
466 | #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ | |
467 | ||
468 | /* controller 4, Base address 203000 */ | |
469 | #define CONFIG_SYS_PCIE4_MEM_VIRT 0xc0000000 | |
470 | #define CONFIG_SYS_PCIE4_MEM_BUS 0xe0000000 | |
471 | #define CONFIG_SYS_PCIE4_MEM_PHYS 0xc40000000ull | |
472 | #define CONFIG_SYS_PCIE4_MEM_SIZE 0x10000000 /* 256M */ | |
473 | #define CONFIG_SYS_PCIE4_IO_BUS 0x00000000 | |
474 | #define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull | |
475 | #define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */ | |
476 | ||
477 | #ifdef CONFIG_PCI | |
478 | #define CONFIG_PCI_INDIRECT_BRIDGE | |
479 | #define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata LSZ ADD */ | |
480 | #define CONFIG_NET_MULTI | |
481 | #define CONFIG_E1000 | |
482 | #define CONFIG_PCI_PNP /* do pci plug-and-play */ | |
483 | #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ | |
484 | #define CONFIG_DOS_PARTITION | |
485 | #endif | |
486 | ||
487 | /* Qman/Bman */ | |
488 | #ifndef CONFIG_NOBQFMAN | |
489 | #define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ | |
490 | #define CONFIG_SYS_BMAN_NUM_PORTALS 18 | |
491 | #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 | |
492 | #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull | |
493 | #define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 | |
494 | #define CONFIG_SYS_QMAN_NUM_PORTALS 18 | |
495 | #define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 | |
496 | #define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull | |
497 | #define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 | |
498 | ||
499 | #define CONFIG_SYS_DPAA_FMAN | |
500 | #define CONFIG_SYS_DPAA_PME | |
501 | #define CONFIG_SYS_PMAN | |
502 | #define CONFIG_SYS_DPAA_DCE | |
503 | #define CONFIG_SYS_DPAA_RMAN /* RMan */ | |
504 | #define CONFIG_SYS_INTERLAKEN | |
505 | ||
506 | /* Default address of microcode for the Linux Fman driver */ | |
507 | #if defined(CONFIG_SPIFLASH) | |
508 | /* | |
509 | * env is stored at 0x100000, sector size is 0x10000, ucode is stored after | |
510 | * env, so we got 0x110000. | |
511 | */ | |
512 | #define CONFIG_SYS_QE_FW_IN_SPIFLASH | |
dcf1d774 | 513 | #define CONFIG_SYS_FMAN_FW_ADDR 0x110000 |
8d67c368 SL |
514 | #define CONFIG_CORTINA_FW_ADDR 0x120000 |
515 | ||
516 | #elif defined(CONFIG_SDCARD) | |
517 | /* | |
518 | * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is | |
519 | * about 825KB (1650 blocks), Env is stored after the image, and the env size is | |
520 | * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680. | |
521 | */ | |
522 | #define CONFIG_SYS_QE_FMAN_FW_IN_MMC | |
dcf1d774 | 523 | #define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680) |
8d67c368 SL |
524 | #define CONFIG_CORTINA_FW_ADDR (512 * 1808) |
525 | ||
526 | #elif defined(CONFIG_NAND) | |
527 | #define CONFIG_SYS_QE_FMAN_FW_IN_NAND | |
dcf1d774 | 528 | #define CONFIG_SYS_FMAN_FW_ADDR (6 * CONFIG_SYS_NAND_BLOCK_SIZE) |
8d67c368 SL |
529 | #define CONFIG_CORTINA_FW_ADDR (7 * CONFIG_SYS_NAND_BLOCK_SIZE) |
530 | #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) | |
531 | /* | |
532 | * Slave has no ucode locally, it can fetch this from remote. When implementing | |
533 | * in two corenet boards, slave's ucode could be stored in master's memory | |
534 | * space, the address can be mapped from slave TLB->slave LAW-> | |
535 | * slave SRIO or PCIE outbound window->master inbound window-> | |
536 | * master LAW->the ucode address in master's memory space. | |
537 | */ | |
538 | #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE | |
dcf1d774 | 539 | #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000 |
8d67c368 SL |
540 | #define CONFIG_CORTINA_FW_ADDR 0xFFE10000 |
541 | #else | |
542 | #define CONFIG_SYS_QE_FMAN_FW_IN_NOR | |
dcf1d774 | 543 | #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 |
8d67c368 SL |
544 | #define CONFIG_CORTINA_FW_ADDR 0xEFE00000 |
545 | #endif | |
546 | #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 | |
547 | #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) | |
548 | #endif /* CONFIG_NOBQFMAN */ | |
549 | ||
550 | #ifdef CONFIG_SYS_DPAA_FMAN | |
551 | #define CONFIG_FMAN_ENET | |
552 | #define CONFIG_PHYLIB_10G | |
553 | #define CONFIG_PHY_CORTINA | |
554 | #define CONFIG_PHY_AQ1202 | |
555 | #define CONFIG_PHY_REALTEK | |
556 | #define CONFIG_CORTINA_FW_LENGTH 0x40000 | |
557 | #define RGMII_PHY1_ADDR 0x01 /* RealTek RTL8211E */ | |
558 | #define RGMII_PHY2_ADDR 0x02 | |
559 | #define CORTINA_PHY_ADDR1 0x0c /* Cortina CS4315 */ | |
560 | #define CORTINA_PHY_ADDR2 0x0d | |
561 | #define FM1_10GEC3_PHY_ADDR 0x00 /* Aquantia AQ1202 10G Base-T */ | |
562 | #define FM1_10GEC4_PHY_ADDR 0x01 | |
563 | #endif | |
564 | ||
565 | ||
566 | #ifdef CONFIG_FMAN_ENET | |
567 | #define CONFIG_MII /* MII PHY management */ | |
568 | #define CONFIG_ETHPRIME "FM1@DTSEC3" | |
569 | #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ | |
570 | #endif | |
571 | ||
572 | /* | |
573 | * SATA | |
574 | */ | |
575 | #ifdef CONFIG_FSL_SATA_V2 | |
576 | #define CONFIG_LIBATA | |
577 | #define CONFIG_FSL_SATA | |
578 | #define CONFIG_SYS_SATA_MAX_DEVICE 2 | |
579 | #define CONFIG_SATA1 | |
580 | #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR | |
581 | #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA | |
582 | #define CONFIG_SATA2 | |
583 | #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR | |
584 | #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA | |
585 | #define CONFIG_LBA48 | |
586 | #define CONFIG_CMD_SATA | |
587 | #define CONFIG_DOS_PARTITION | |
588 | #define CONFIG_CMD_EXT2 | |
589 | #endif | |
590 | ||
591 | /* | |
592 | * USB | |
593 | */ | |
594 | #ifdef CONFIG_USB_EHCI | |
595 | #define CONFIG_CMD_USB | |
596 | #define CONFIG_USB_STORAGE | |
597 | #define CONFIG_USB_EHCI_FSL | |
598 | #define CONFIG_EHCI_HCD_INIT_AFTER_RESET | |
599 | #define CONFIG_CMD_EXT2 | |
600 | #define CONFIG_HAS_FSL_DR_USB | |
601 | #endif | |
602 | ||
603 | /* | |
604 | * SDHC | |
605 | */ | |
606 | #ifdef CONFIG_MMC | |
607 | #define CONFIG_CMD_MMC | |
608 | #define CONFIG_FSL_ESDHC | |
609 | #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR | |
610 | #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT | |
611 | #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 | |
612 | #define CONFIG_GENERIC_MMC | |
613 | #define CONFIG_CMD_EXT2 | |
614 | #define CONFIG_CMD_FAT | |
615 | #define CONFIG_DOS_PARTITION | |
616 | #endif | |
617 | ||
4feac1c6 SL |
618 | /* |
619 | * Dynamic MTD Partition support with mtdparts | |
620 | */ | |
621 | #ifndef CONFIG_SYS_NO_FLASH | |
622 | #define CONFIG_MTD_DEVICE | |
623 | #define CONFIG_MTD_PARTITIONS | |
624 | #define CONFIG_CMD_MTDPARTS | |
625 | #define CONFIG_FLASH_CFI_MTD | |
626 | #define MTDIDS_DEFAULT "nor0=fe8000000.nor,nand0=fff800000.flash," \ | |
627 | "spi0=spife110000.1" | |
628 | #define MTDPARTS_DEFAULT "mtdparts=fe8000000.nor:1m(uboot),5m(kernel)," \ | |
629 | "128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot)," \ | |
630 | "5m(kernel),128k(dtb),96m(fs),-(user);spife110000.1:" \ | |
631 | "1m(uboot),5m(kernel),128k(dtb),-(user)" | |
632 | #endif | |
633 | ||
8d67c368 SL |
634 | /* |
635 | * Environment | |
636 | */ | |
637 | ||
638 | /* | |
639 | * Command line configuration. | |
640 | */ | |
641 | #include <config_cmd_default.h> | |
642 | ||
643 | #define CONFIG_CMD_DHCP | |
644 | #define CONFIG_CMD_ELF | |
645 | #define CONFIG_CMD_MII | |
646 | #define CONFIG_CMD_I2C | |
647 | #define CONFIG_CMD_PING | |
648 | #define CONFIG_CMD_ECHO | |
649 | #define CONFIG_CMD_SETEXPR | |
650 | #define CONFIG_CMD_REGINFO | |
651 | #define CONFIG_CMD_BDI | |
652 | ||
653 | #ifdef CONFIG_PCI | |
654 | #define CONFIG_CMD_PCI | |
655 | #define CONFIG_CMD_NET | |
656 | #endif | |
657 | ||
658 | /* | |
659 | * Miscellaneous configurable options | |
660 | */ | |
661 | #define CONFIG_SYS_LONGHELP /* undef to save memory */ | |
662 | #define CONFIG_CMDLINE_EDITING /* Command-line editing */ | |
663 | #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ | |
664 | #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ | |
665 | #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ | |
666 | #ifdef CONFIG_CMD_KGDB | |
667 | #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ | |
668 | #else | |
669 | #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ | |
670 | #endif | |
671 | #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) | |
672 | #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ | |
673 | #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ | |
674 | #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks*/ | |
675 | ||
676 | /* | |
677 | * For booting Linux, the board info and command line data | |
678 | * have to be in the first 64 MB of memory, since this is | |
679 | * the maximum mapped by the Linux kernel during initialization. | |
680 | */ | |
681 | #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ | |
682 | #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ | |
683 | ||
684 | #ifdef CONFIG_CMD_KGDB | |
685 | #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ | |
686 | #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ | |
687 | #endif | |
688 | ||
689 | /* | |
690 | * Environment Configuration | |
691 | */ | |
692 | #define CONFIG_ROOTPATH "/opt/nfsroot" | |
693 | #define CONFIG_BOOTFILE "uImage" | |
694 | #define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server */ | |
695 | ||
696 | /* default location for tftp and bootm */ | |
697 | #define CONFIG_LOADADDR 1000000 | |
698 | #define CONFIG_BAUDRATE 115200 | |
699 | #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ | |
700 | #define __USB_PHY_TYPE utmi | |
701 | ||
702 | #define CONFIG_EXTRA_ENV_SETTINGS \ | |
703 | "hwconfig=fsl_ddr:" \ | |
704 | "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) "," \ | |
705 | "bank_intlv=auto;" \ | |
706 | "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ | |
707 | "netdev=eth0\0" \ | |
708 | "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ | |
709 | "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ | |
710 | "tftpflash=tftpboot $loadaddr $uboot && " \ | |
711 | "protect off $ubootaddr +$filesize && " \ | |
712 | "erase $ubootaddr +$filesize && " \ | |
713 | "cp.b $loadaddr $ubootaddr $filesize && " \ | |
714 | "protect on $ubootaddr +$filesize && " \ | |
715 | "cmp.b $loadaddr $ubootaddr $filesize\0" \ | |
716 | "consoledev=ttyS0\0" \ | |
717 | "ramdiskaddr=2000000\0" \ | |
718 | "ramdiskfile=t2080rdb/ramdisk.uboot\0" \ | |
719 | "fdtaddr=c00000\0" \ | |
720 | "fdtfile=t2080rdb/t2080rdb.dtb\0" \ | |
721 | "bdev=sda3\0" \ | |
722 | "c=ffe\0" | |
723 | ||
724 | /* | |
725 | * For emulation this causes u-boot to jump to the start of the | |
726 | * proof point app code automatically | |
727 | */ | |
728 | #define CONFIG_PROOF_POINTS \ | |
729 | "setenv bootargs root=/dev/$bdev rw " \ | |
730 | "console=$consoledev,$baudrate $othbootargs;" \ | |
731 | "cpu 1 release 0x29000000 - - -;" \ | |
732 | "cpu 2 release 0x29000000 - - -;" \ | |
733 | "cpu 3 release 0x29000000 - - -;" \ | |
734 | "cpu 4 release 0x29000000 - - -;" \ | |
735 | "cpu 5 release 0x29000000 - - -;" \ | |
736 | "cpu 6 release 0x29000000 - - -;" \ | |
737 | "cpu 7 release 0x29000000 - - -;" \ | |
738 | "go 0x29000000" | |
739 | ||
740 | #define CONFIG_HVBOOT \ | |
741 | "setenv bootargs config-addr=0x60000000; " \ | |
742 | "bootm 0x01000000 - 0x00f00000" | |
743 | ||
744 | #define CONFIG_ALU \ | |
745 | "setenv bootargs root=/dev/$bdev rw " \ | |
746 | "console=$consoledev,$baudrate $othbootargs;" \ | |
747 | "cpu 1 release 0x01000000 - - -;" \ | |
748 | "cpu 2 release 0x01000000 - - -;" \ | |
749 | "cpu 3 release 0x01000000 - - -;" \ | |
750 | "cpu 4 release 0x01000000 - - -;" \ | |
751 | "cpu 5 release 0x01000000 - - -;" \ | |
752 | "cpu 6 release 0x01000000 - - -;" \ | |
753 | "cpu 7 release 0x01000000 - - -;" \ | |
754 | "go 0x01000000" | |
755 | ||
756 | #define CONFIG_LINUX \ | |
757 | "setenv bootargs root=/dev/ram rw " \ | |
758 | "console=$consoledev,$baudrate $othbootargs;" \ | |
759 | "setenv ramdiskaddr 0x02000000;" \ | |
760 | "setenv fdtaddr 0x00c00000;" \ | |
761 | "setenv loadaddr 0x1000000;" \ | |
762 | "bootm $loadaddr $ramdiskaddr $fdtaddr" | |
763 | ||
764 | #define CONFIG_HDBOOT \ | |
765 | "setenv bootargs root=/dev/$bdev rw " \ | |
766 | "console=$consoledev,$baudrate $othbootargs;" \ | |
767 | "tftp $loadaddr $bootfile;" \ | |
768 | "tftp $fdtaddr $fdtfile;" \ | |
769 | "bootm $loadaddr - $fdtaddr" | |
770 | ||
771 | #define CONFIG_NFSBOOTCOMMAND \ | |
772 | "setenv bootargs root=/dev/nfs rw " \ | |
773 | "nfsroot=$serverip:$rootpath " \ | |
774 | "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ | |
775 | "console=$consoledev,$baudrate $othbootargs;" \ | |
776 | "tftp $loadaddr $bootfile;" \ | |
777 | "tftp $fdtaddr $fdtfile;" \ | |
778 | "bootm $loadaddr - $fdtaddr" | |
779 | ||
780 | #define CONFIG_RAMBOOTCOMMAND \ | |
781 | "setenv bootargs root=/dev/ram rw " \ | |
782 | "console=$consoledev,$baudrate $othbootargs;" \ | |
783 | "tftp $ramdiskaddr $ramdiskfile;" \ | |
784 | "tftp $loadaddr $bootfile;" \ | |
785 | "tftp $fdtaddr $fdtfile;" \ | |
786 | "bootm $loadaddr $ramdiskaddr $fdtaddr" | |
787 | ||
788 | #define CONFIG_BOOTCOMMAND CONFIG_LINUX | |
789 | ||
790 | #ifdef CONFIG_SECURE_BOOT | |
791 | #include <asm/fsl_secure_boot.h> | |
792 | #undef CONFIG_CMD_USB | |
793 | #endif | |
794 | ||
795 | #endif /* __T2080RDB_H */ |