[people/ms/u-boot.git] / include / configs / T4240EMU.h

/*
 * Copyright 2013 Freescale Semiconductor, Inc.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

/*
 * T4240 EMU board configuration file
 */
#ifndef __CONFIG_H
#define __CONFIG_H

#define CONFIG_T4240EMU
#define CONFIG_PHYS_64BIT

#define CONFIG_SYS_NO_FLASH		1
#define CONFIG_SYS_FSL_DDR_EMU		1
#define CONFIG_SYS_FSL_NO_QIXIS		1
#define CONFIG_SYS_FSL_NO_SERDES	1

#include "t4qds.h"

#define CONFIG_CMD_CACHE
#define CONFIG_CMD_CACHE_FLUSH

#define CONFIG_ENV_IS_NOWHERE
#define CONFIG_ENV_SIZE         0x2000

#define CONFIG_SYS_CLK_FREQ	100000000
#define CONFIG_DDR_CLK_FREQ	133333333
#define CONFIG_FSL_TBCLK_EXTRA_DIV 100

/*
 * DDR Setup
 */
#define CONFIG_SYS_SPD_BUS_NUM	1
#define SPD_EEPROM_ADDRESS1	0x51
#define SPD_EEPROM_ADDRESS2	0x52
#define SPD_EEPROM_ADDRESS3	0x53
#define SPD_EEPROM_ADDRESS4	0x54
#define SPD_EEPROM_ADDRESS5	0x55
#define SPD_EEPROM_ADDRESS6	0x56
#define SPD_EEPROM_ADDRESS	SPD_EEPROM_ADDRESS1	/* for p3041/p5010 */
#define CONFIG_SYS_SDRAM_SIZE	4096	/* for fixed parameter use */

/*
 * IFC Definitions
 */
#define CONFIG_SYS_NOR0_CSPR_EXT	(0xf)
#define CONFIG_SYS_NOR_AMASK	IFC_AMASK(128*1024*1024)
/* NOR Flash Timing Params */
#define CONFIG_SYS_NOR0_CSPR	(CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
				+ 0x8000000) | \
				CSPR_PORT_SIZE_32 | \
				CSPR_MSEL_NOR | \
				CSPR_V)
#define CONFIG_SYS_NOR_CSOR	CSOR_NOR_ADM_SHIFT(0)
#define CONFIG_SYS_NOR_FTIM0	(FTIM0_NOR_TACSE(0x1) | \
				FTIM0_NOR_TEADC(0x1) | \
				FTIM0_NOR_TEAHC(0x1))
#define CONFIG_SYS_NOR_FTIM1	(FTIM1_NOR_TACO(0x1) | \
				FTIM1_NOR_TRAD_NOR(0x1))
#define CONFIG_SYS_NOR_FTIM2	(FTIM2_NOR_TCS(0x0) | \
				FTIM2_NOR_TCH(0x0) | \
				FTIM2_NOR_TWP(0x1))
#define CONFIG_SYS_NOR_FTIM3	0x04000000
#define CONFIG_SYS_IFC_CCR	0x01000000

#define CONFIG_SYS_CSPR0_EXT		CONFIG_SYS_NOR0_CSPR_EXT
#define CONFIG_SYS_CSPR0		CONFIG_SYS_NOR0_CSPR
#define CONFIG_SYS_AMASK0		CONFIG_SYS_NOR_AMASK
#define CONFIG_SYS_CSOR0		CONFIG_SYS_NOR_CSOR
#define CONFIG_SYS_CS0_FTIM0		CONFIG_SYS_NOR_FTIM0
#define CONFIG_SYS_CS0_FTIM1		CONFIG_SYS_NOR_FTIM1
#define CONFIG_SYS_CS0_FTIM2		CONFIG_SYS_NOR_FTIM2
#define CONFIG_SYS_CS0_FTIM3		CONFIG_SYS_NOR_FTIM3

/* I2C */
#define CONFIG_SYS_FSL_I2C_SPEED	4000000	/* faster speed for emulator */
#define CONFIG_SYS_FSL_I2C2_SPEED	4000000

/* Qman/Bman */
#define CONFIG_SYS_DPAA_QBMAN		/* Support Q/Bman */
#define CONFIG_SYS_BMAN_NUM_PORTALS	50
#define CONFIG_SYS_BMAN_MEM_BASE	0xf4000000
#define CONFIG_SYS_BMAN_MEM_PHYS	0xff4000000ull
#define CONFIG_SYS_BMAN_MEM_SIZE	0x02000000
#define CONFIG_SYS_QMAN_NUM_PORTALS	50
#define CONFIG_SYS_QMAN_MEM_BASE	0xf6000000
#define CONFIG_SYS_QMAN_MEM_PHYS	0xff6000000ull
#define CONFIG_SYS_QMAN_MEM_SIZE	0x02000000

#define CONFIG_SYS_DPAA_FMAN
#define CONFIG_SYS_DPAA_PME
#define CONFIG_SYS_PMAN
#define CONFIG_SYS_DPAA_DCE
#define CONFIG_SYS_DPAA_RMAN
#define CONFIG_SYS_INTERLAKEN

#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
#define CONFIG_SYS_FMAN_FW_ADDR		0xEFF00000
#define CONFIG_SYS_QE_FMAN_FW_LENGTH	0x10000
#define CONFIG_SYS_FDT_PAD		(0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)

#define CONFIG_BOOTDELAY	0

/*
 * T4240 has 3 DDR controllers. Default to 3-way interleaving. It can be
 * 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to 2-way
 * interleaving. It can be cacheline, page, bank, superbank.
 * See doc/README.fsl-ddr for details.
 */
#ifdef CONFIG_PPC_T4240
#define CTRL_INTLV_PREFERED 3way_4KB
#else
#define CTRL_INTLV_PREFERED cacheline
#endif

#define	CONFIG_EXTRA_ENV_SETTINGS				\
	"hwconfig=fsl_ddr:"					\
	"ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) ","	\
	"bank_intlv=auto;"					\
	"netdev=eth0\0"						\
	"uboot=" __stringify(CONFIG_UBOOTPATH) "\0"			\
"ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"		\
	"consoledev=ttyS0\0"					\
	"ramdiskaddr=2000000\0"					\
	"ramdiskfile=t4240emu/ramdisk.uboot\0"			\
	"fdtaddr=c00000\0"					\
	"fdtfile=t4240emu/t4240emu.dtb\0"				\
	"bdev=sda3\0"

/*
 * For emulation this causes u-boot to jump to the start of the proof point
 * app code automatically
 */
#define CONFIG_PROOF_POINTS			\
	"setenv bootargs root=/dev/$bdev rw "		\
	"console=$consoledev,$baudrate $othbootargs;"	\
	"cpu 1 release 0x29000000 - - -;"		\
	"cpu 2 release 0x29000000 - - -;"		\
	"cpu 3 release 0x29000000 - - -;"		\
	"cpu 4 release 0x29000000 - - -;"		\
	"cpu 5 release 0x29000000 - - -;"		\
	"cpu 6 release 0x29000000 - - -;"		\
	"cpu 7 release 0x29000000 - - -;"		\
	"go 0x29000000"

#define CONFIG_HVBOOT				\
	"setenv bootargs config-addr=0x60000000; "	\
	"bootm 0x01000000 - 0x00f00000"

#define CONFIG_LINUX					\
	"errata;"					\
	"setenv othbootargs ignore_loglevel;"		\
	"setenv bootargs root=/dev/ram rw "		\
	"console=$consoledev,$baudrate $othbootargs;"	\
	"setenv ramdiskaddr 0x02000000;"		\
	"setenv fdtaddr 0x00c00000;"			\
	"setenv loadaddr 0x1000000;"			\
	"bootm $loadaddr $ramdiskaddr $fdtaddr"

#define CONFIG_BOOTCOMMAND		CONFIG_LINUX

#endif	/* __CONFIG_H */
Commit	Line	Data
1cb19fbb YS	1	/*
	2	* Copyright 2013 Freescale Semiconductor, Inc.
	3	*
3aab0cd8	4	* SPDX-License-Identifier: GPL-2.0+
1cb19fbb YS	5	*/
	6
	7	/*
	8	* T4240 EMU board configuration file
	9	*/
	10	#ifndef __CONFIG_H
	11	#define __CONFIG_H
	12
	13	#define CONFIG_T4240EMU
	14	#define CONFIG_PHYS_64BIT
	15
	16	#define CONFIG_SYS_NO_FLASH 1
	17	#define CONFIG_SYS_FSL_DDR_EMU 1
	18	#define CONFIG_SYS_FSL_NO_QIXIS 1
	19	#define CONFIG_SYS_FSL_NO_SERDES 1
	20
	21	#include "t4qds.h"
	22
	23	#define CONFIG_CMD_CACHE
	24	#define CONFIG_CMD_CACHE_FLUSH
	25
	26	#define CONFIG_ENV_IS_NOWHERE
	27	#define CONFIG_ENV_SIZE 0x2000
	28
	29	#define CONFIG_SYS_CLK_FREQ 100000000
	30	#define CONFIG_DDR_CLK_FREQ 133333333
	31	#define CONFIG_FSL_TBCLK_EXTRA_DIV 100
	32
1cb19fbb YS	33	/*
	34	* DDR Setup
	35	*/
	36	#define CONFIG_SYS_SPD_BUS_NUM 1
	37	#define SPD_EEPROM_ADDRESS1 0x51
	38	#define SPD_EEPROM_ADDRESS2 0x52
	39	#define SPD_EEPROM_ADDRESS3 0x53
	40	#define SPD_EEPROM_ADDRESS4 0x54
	41	#define SPD_EEPROM_ADDRESS5 0x55
	42	#define SPD_EEPROM_ADDRESS6 0x56
	43	#define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 /* for p3041/p5010 */
	44	#define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */
	45
	46	/*
	47	* IFC Definitions
	48	*/
	49	#define CONFIG_SYS_NOR0_CSPR_EXT (0xf)
	50	#define CONFIG_SYS_NOR_AMASK IFC_AMASK(12810241024)
	51	/* NOR Flash Timing Params */
	52	#define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
	53	+ 0x8000000) \| \
	54	CSPR_PORT_SIZE_32 \| \
	55	CSPR_MSEL_NOR \| \
	56	CSPR_V)
	57	#define CONFIG_SYS_NOR_CSOR CSOR_NOR_ADM_SHIFT(0)
	58	#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x1) \| \
	59	FTIM0_NOR_TEADC(0x1) \| \
	60	FTIM0_NOR_TEAHC(0x1))
	61	#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x1) \| \
	62	FTIM1_NOR_TRAD_NOR(0x1))
	63	#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x0) \| \
	64	FTIM2_NOR_TCH(0x0) \| \
	65	FTIM2_NOR_TWP(0x1))
	66	#define CONFIG_SYS_NOR_FTIM3 0x04000000
	67	#define CONFIG_SYS_IFC_CCR 0x01000000
	68
	69	#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT
	70	#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR
	71	#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK
	72	#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR
	73	#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0
	74	#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1
	75	#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2
	76	#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3
	77
1cb19fbb YS	78	/* I2C */
	79	#define CONFIG_SYS_FSL_I2C_SPEED 4000000 /* faster speed for emulator */
	80	#define CONFIG_SYS_FSL_I2C2_SPEED 4000000
	81
	82	/* Qman/Bman */
	83	#define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */
	84	#define CONFIG_SYS_BMAN_NUM_PORTALS 50
	85	#define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000
	86	#define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull
	87	#define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000
	88	#define CONFIG_SYS_QMAN_NUM_PORTALS 50
	89	#define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000
	90	#define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull
	91	#define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000
	92
	93	#define CONFIG_SYS_DPAA_FMAN
	94	#define CONFIG_SYS_DPAA_PME
	95	#define CONFIG_SYS_PMAN
	96	#define CONFIG_SYS_DPAA_DCE
0795eff3	97	#define CONFIG_SYS_DPAA_RMAN
1cb19fbb YS	98	#define CONFIG_SYS_INTERLAKEN
	99
	100	#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
dcf1d774	101	#define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000
1cb19fbb YS	102	#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000
	103	#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
	104
1cb19fbb YS	105	#define CONFIG_BOOTDELAY 0
	106
	107	/*
	108	* T4240 has 3 DDR controllers. Default to 3-way interleaving. It can be
	109	* 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to 2-way
	110	* interleaving. It can be cacheline, page, bank, superbank.
	111	* See doc/README.fsl-ddr for details.
	112	*/
	113	#ifdef CONFIG_PPC_T4240
	114	#define CTRL_INTLV_PREFERED 3way_4KB
	115	#else
	116	#define CTRL_INTLV_PREFERED cacheline
	117	#endif
	118
	119	#define CONFIG_EXTRA_ENV_SETTINGS \
	120	"hwconfig=fsl_ddr:" \
	121	"ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) "," \
	122	"bank_intlv=auto;" \
	123	"netdev=eth0\0" \
	124	"uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \
e222b1f3	125	"ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \
1cb19fbb YS	126	"consoledev=ttyS0\0" \
	127	"ramdiskaddr=2000000\0" \
	128	"ramdiskfile=t4240emu/ramdisk.uboot\0" \
	129	"fdtaddr=c00000\0" \
	130	"fdtfile=t4240emu/t4240emu.dtb\0" \
3246584d	131	"bdev=sda3\0"
1cb19fbb YS	132
	133	/*
	134	* For emulation this causes u-boot to jump to the start of the proof point
	135	* app code automatically
	136	*/
	137	#define CONFIG_PROOF_POINTS \
	138	"setenv bootargs root=/dev/$bdev rw " \
	139	"console=$consoledev,$baudrate $othbootargs;" \
	140	"cpu 1 release 0x29000000 - - -;" \
	141	"cpu 2 release 0x29000000 - - -;" \
	142	"cpu 3 release 0x29000000 - - -;" \
	143	"cpu 4 release 0x29000000 - - -;" \
	144	"cpu 5 release 0x29000000 - - -;" \
	145	"cpu 6 release 0x29000000 - - -;" \
	146	"cpu 7 release 0x29000000 - - -;" \
	147	"go 0x29000000"
	148
	149	#define CONFIG_HVBOOT \
	150	"setenv bootargs config-addr=0x60000000; " \
	151	"bootm 0x01000000 - 0x00f00000"
	152
	153	#define CONFIG_LINUX \
	154	"errata;" \
	155	"setenv othbootargs ignore_loglevel;" \
	156	"setenv bootargs root=/dev/ram rw " \
	157	"console=$consoledev,$baudrate $othbootargs;" \
	158	"setenv ramdiskaddr 0x02000000;" \
	159	"setenv fdtaddr 0x00c00000;" \
	160	"setenv loadaddr 0x1000000;" \
	161	"bootm $loadaddr $ramdiskaddr $fdtaddr"
	162
	163	#define CONFIG_BOOTCOMMAND CONFIG_LINUX
	164
	165	#endif /* __CONFIG_H */