projects / people / ms / u-boot.git / blame
| Commit | Line | Data |
|---|---|---|
| 0b2e13d9 CL |
1 | /* |
| 2 | * Copyright 2014 Freescale Semiconductor, Inc. | |
| 3 | * | |
| 4 | * SPDX-License-Identifier: GPL-2.0+ | |
| 5 | */ | |
| 6 | ||
| 7 | /* | |
| 8 | * T4240 RDB board configuration file | |
| 9 | */ | |
| 10 | #ifndef __CONFIG_H | |
| 11 | #define __CONFIG_H | |
| 12 | ||
| 13 | #define CONFIG_T4240RDB | |
| 14 | #define CONFIG_PHYS_64BIT | |
| 9a509cf6 CL |
15 | #define CONFIG_SYS_GENERIC_BOARD |
| 16 | #define CONFIG_DISPLAY_BOARDINFO | |
| 0b2e13d9 CL |
17 | |
| 18 | #define CONFIG_FSL_SATA_V2 | |
| 19 | #define CONFIG_PCIE4 | |
| 20 | ||
| 21 | #define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */ | |
| 22 | ||
| 23 | #ifdef CONFIG_RAMBOOT_PBL | |
| 0b2e13d9 CL |
24 | #define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t4rdb/t4_pbi.cfg |
| 25 | #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t4rdb/t4_rcw.cfg | |
| 373762c3 CL |
26 | #ifndef CONFIG_SDCARD |
| 27 | #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE | |
| 28 | #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc | |
| 29 | #else | |
| 30 | #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT | |
| 31 | #define CONFIG_SPL_ENV_SUPPORT | |
| 32 | #define CONFIG_SPL_SERIAL_SUPPORT | |
| 33 | #define CONFIG_SPL_FLUSH_IMAGE | |
| 34 | #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" | |
| 35 | #define CONFIG_SPL_LIBGENERIC_SUPPORT | |
| 36 | #define CONFIG_SPL_LIBCOMMON_SUPPORT | |
| 37 | #define CONFIG_SPL_I2C_SUPPORT | |
| 38 | #define CONFIG_SPL_DRIVERS_MISC_SUPPORT | |
| 39 | #define CONFIG_FSL_LAW /* Use common FSL init code */ | |
| 40 | #define CONFIG_SYS_TEXT_BASE 0x00201000 | |
| 41 | #define CONFIG_SPL_TEXT_BASE 0xFFFD8000 | |
| 42 | #define CONFIG_SPL_PAD_TO 0x40000 | |
| 43 | #define CONFIG_SPL_MAX_SIZE 0x28000 | |
| 44 | #define RESET_VECTOR_OFFSET 0x27FFC | |
| 45 | #define BOOT_PAGE_OFFSET 0x27000 | |
| 46 | ||
| 47 | #ifdef CONFIG_SDCARD | |
| 48 | #define CONFIG_RESET_VECTOR_ADDRESS 0x200FFC | |
| 49 | #define CONFIG_SPL_MMC_SUPPORT | |
| 50 | #define CONFIG_SPL_MMC_MINIMAL | |
| 51 | #define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10) | |
| 52 | #define CONFIG_SYS_MMC_U_BOOT_DST 0x00200000 | |
| 53 | #define CONFIG_SYS_MMC_U_BOOT_START 0x00200000 | |
| 54 | #define CONFIG_SYS_MMC_U_BOOT_OFFS (260 << 10) | |
| 55 | #ifndef CONFIG_SPL_BUILD | |
| 56 | #define CONFIG_SYS_MPC85XX_NO_RESETVEC | |
| 57 | #endif | |
| 58 | #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" | |
| 59 | #define CONFIG_SPL_MMC_BOOT | |
| 60 | #endif | |
| 61 | ||
| 62 | #ifdef CONFIG_SPL_BUILD | |
| 63 | #define CONFIG_SPL_SKIP_RELOCATE | |
| 64 | #define CONFIG_SPL_COMMON_INIT_DDR | |
| 65 | #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE | |
| 66 | #define CONFIG_SYS_NO_FLASH | |
| 67 | #endif | |
| 68 | ||
| 0b2e13d9 | 69 | #endif |
| 373762c3 | 70 | #endif /* CONFIG_RAMBOOT_PBL */ |
| 0b2e13d9 CL |
71 | |
| 72 | #define CONFIG_DDR_ECC | |
| 73 | ||
| 74 | #define CONFIG_CMD_REGINFO | |
| 75 | ||
| 76 | /* High Level Configuration Options */ | |
| 77 | #define CONFIG_BOOKE | |
| 78 | #define CONFIG_E500 /* BOOKE e500 family */ | |
| 79 | #define CONFIG_E500MC /* BOOKE e500mc family */ | |
| 80 | #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ | |
| 81 | #define CONFIG_MP /* support multiple processors */ | |
| 82 | ||
| 83 | #ifndef CONFIG_SYS_TEXT_BASE | |
| 84 | #define CONFIG_SYS_TEXT_BASE 0xeff40000 | |
| 85 | #endif | |
| 86 | ||
| 87 | #ifndef CONFIG_RESET_VECTOR_ADDRESS | |
| 88 | #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc | |
| 89 | #endif | |
| 90 | ||
| 91 | #define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ | |
| 92 | #define CONFIG_SYS_NUM_CPC CONFIG_NUM_DDR_CONTROLLERS | |
| 93 | #define CONFIG_FSL_IFC /* Enable IFC Support */ | |
| 737537ef | 94 | #define CONFIG_FSL_CAAM /* Enable SEC/CAAM */ |
| 0b2e13d9 CL |
95 | #define CONFIG_PCI /* Enable PCI/PCIE */ |
| 96 | #define CONFIG_PCIE1 /* PCIE controler 1 */ | |
| 97 | #define CONFIG_PCIE2 /* PCIE controler 2 */ | |
| 98 | #define CONFIG_PCIE3 /* PCIE controler 3 */ | |
| 99 | #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ | |
| 100 | #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ | |
| 101 | ||
| 102 | #define CONFIG_FSL_LAW /* Use common FSL init code */ | |
| 103 | ||
| 104 | #define CONFIG_ENV_OVERWRITE | |
| 105 | ||
| 106 | /* | |
| 107 | * These can be toggled for performance analysis, otherwise use default. | |
| 108 | */ | |
| 109 | #define CONFIG_SYS_CACHE_STASHING | |
| 110 | #define CONFIG_BTB /* toggle branch predition */ | |
| 111 | #ifdef CONFIG_DDR_ECC | |
| 112 | #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER | |
| 113 | #define CONFIG_MEM_INIT_VALUE 0xdeadbeef | |
| 114 | #endif | |
| 115 | ||
| 116 | #define CONFIG_ENABLE_36BIT_PHYS | |
| 117 | ||
| 118 | #define CONFIG_ADDR_MAP | |
| 119 | #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ | |
| 120 | ||
| 121 | #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ | |
| 122 | #define CONFIG_SYS_MEMTEST_END 0x00400000 | |
| 123 | #define CONFIG_SYS_ALT_MEMTEST | |
| 124 | #define CONFIG_PANIC_HANG /* do not reset board on panic */ | |
| 125 | ||
| 126 | /* | |
| 127 | * Config the L3 Cache as L3 SRAM | |
| 128 | */ | |
| 373762c3 CL |
129 | #define CONFIG_SYS_INIT_L3_ADDR 0xFFFC0000 |
| 130 | #define CONFIG_SYS_L3_SIZE (512 << 10) | |
| 131 | #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024) | |
| 132 | #ifdef CONFIG_RAMBOOT_PBL | |
| 133 | #define CONFIG_ENV_ADDR (CONFIG_SPL_GD_ADDR + 4 * 1024) | |
| 134 | #endif | |
| 135 | #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SPL_GD_ADDR + 12 * 1024) | |
| 136 | #define CONFIG_SPL_RELOC_MALLOC_SIZE (50 << 10) | |
| 137 | #define CONFIG_SPL_RELOC_STACK (CONFIG_SPL_GD_ADDR + 64 * 1024) | |
| 138 | #define CONFIG_SPL_RELOC_STACK_SIZE (22 << 10) | |
| 0b2e13d9 CL |
139 | |
| 140 | #define CONFIG_SYS_DCSRBAR 0xf0000000 | |
| 141 | #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull | |
| 142 | ||
| 143 | /* | |
| 144 | * DDR Setup | |
| 145 | */ | |
| 146 | #define CONFIG_VERY_BIG_RAM | |
| 147 | #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 | |
| 148 | #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE | |
| 149 | ||
| 150 | /* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */ | |
| 151 | #define CONFIG_DIMM_SLOTS_PER_CTLR 1 | |
| 152 | #define CONFIG_CHIP_SELECTS_PER_CTRL 4 | |
| 153 | #define CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE | |
| 154 | ||
| 155 | #define CONFIG_DDR_SPD | |
| 156 | #define CONFIG_SYS_FSL_DDR3 | |
| 157 | ||
| 158 | ||
| 159 | /* | |
| 160 | * IFC Definitions | |
| 161 | */ | |
| 162 | #define CONFIG_SYS_FLASH_BASE 0xe0000000 | |
| 163 | #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) | |
| 164 | ||
| 165 | ||
| 373762c3 CL |
166 | #ifdef CONFIG_SPL_BUILD |
| 167 | #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE | |
| 168 | #else | |
| 0b2e13d9 | 169 | #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE |
| 373762c3 | 170 | #endif |
| 0b2e13d9 CL |
171 | |
| 172 | #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ | |
| 173 | #define CONFIG_MISC_INIT_R | |
| 174 | ||
| 175 | #define CONFIG_HWCONFIG | |
| 176 | ||
| 177 | /* define to use L1 as initial stack */ | |
| 178 | #define CONFIG_L1_INIT_RAM | |
| 179 | #define CONFIG_SYS_INIT_RAM_LOCK | |
| 180 | #define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ | |
| 181 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf | |
| 182 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe0ec000 | |
| 183 | /* The assembler doesn't like typecast */ | |
| 184 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ | |
| 185 | ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ | |
| 186 | CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) | |
| 187 | #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 | |
| 188 | ||
| 189 | #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ | |
| 190 | GENERATED_GBL_DATA_SIZE) | |
| 191 | #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET | |
| 192 | ||
| 373762c3 | 193 | #define CONFIG_SYS_MONITOR_LEN (768 * 1024) |
| 0b2e13d9 CL |
194 | #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) |
| 195 | ||
| 196 | /* Serial Port - controlled on board with jumper J8 | |
| 197 | * open - index 2 | |
| 198 | * shorted - index 1 | |
| 199 | */ | |
| 200 | #define CONFIG_CONS_INDEX 1 | |
| 201 | #define CONFIG_SYS_NS16550 | |
| 202 | #define CONFIG_SYS_NS16550_SERIAL | |
| 203 | #define CONFIG_SYS_NS16550_REG_SIZE 1 | |
| 204 | #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) | |
| 205 | ||
| 206 | #define CONFIG_SYS_BAUDRATE_TABLE \ | |
| 207 | {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} | |
| 208 | ||
| 209 | #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) | |
| 210 | #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) | |
| 211 | #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) | |
| 212 | #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) | |
| 213 | ||
| 214 | /* Use the HUSH parser */ | |
| 215 | #define CONFIG_SYS_HUSH_PARSER | |
| 216 | #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " | |
| 217 | ||
| 218 | /* pass open firmware flat tree */ | |
| 219 | #define CONFIG_OF_LIBFDT | |
| 220 | #define CONFIG_OF_BOARD_SETUP | |
| 221 | #define CONFIG_OF_STDOUT_VIA_ALIAS | |
| 222 | ||
| 223 | /* new uImage format support */ | |
| 224 | #define CONFIG_FIT | |
| 225 | #define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ | |
| 226 | ||
| 227 | /* I2C */ | |
| 228 | #define CONFIG_SYS_I2C | |
| 229 | #define CONFIG_SYS_I2C_FSL | |
| 230 | #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F | |
| 231 | #define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 | |
| 232 | #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F | |
| 233 | #define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100 | |
| 234 | ||
| 235 | /* | |
| 236 | * General PCI | |
| 237 | * Memory space is mapped 1-1, but I/O space must start from 0. | |
| 238 | */ | |
| 239 | ||
| 240 | /* controller 1, direct to uli, tgtid 3, Base address 20000 */ | |
| 241 | #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 | |
| 242 | #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 | |
| 243 | #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull | |
| 244 | #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ | |
| 245 | #define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 | |
| 246 | #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 | |
| 247 | #define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull | |
| 248 | #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ | |
| 249 | ||
| 250 | /* controller 2, Slot 2, tgtid 2, Base address 201000 */ | |
| 251 | #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 | |
| 252 | #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 | |
| 253 | #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull | |
| 254 | #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ | |
| 255 | #define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 | |
| 256 | #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 | |
| 257 | #define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull | |
| 258 | #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ | |
| 259 | ||
| 260 | /* controller 3, Slot 1, tgtid 1, Base address 202000 */ | |
| 261 | #define CONFIG_SYS_PCIE3_MEM_VIRT 0xc0000000 | |
| 262 | #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 | |
| 263 | #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc40000000ull | |
| 264 | #define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ | |
| 265 | #define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 | |
| 266 | #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 | |
| 267 | #define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull | |
| 268 | #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ | |
| 269 | ||
| 270 | /* controller 4, Base address 203000 */ | |
| 271 | #define CONFIG_SYS_PCIE4_MEM_BUS 0xe0000000 | |
| 272 | #define CONFIG_SYS_PCIE4_MEM_PHYS 0xc60000000ull | |
| 273 | #define CONFIG_SYS_PCIE4_MEM_SIZE 0x20000000 /* 512M */ | |
| 274 | #define CONFIG_SYS_PCIE4_IO_BUS 0x00000000 | |
| 275 | #define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull | |
| 276 | #define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */ | |
| 277 | ||
| 278 | #ifdef CONFIG_PCI | |
| 279 | #define CONFIG_PCI_INDIRECT_BRIDGE | |
| 0b2e13d9 CL |
280 | #define CONFIG_PCI_PNP /* do pci plug-and-play */ |
| 281 | #define CONFIG_E1000 | |
| 282 | ||
| 283 | #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ | |
| 284 | #define CONFIG_DOS_PARTITION | |
| 285 | #endif /* CONFIG_PCI */ | |
| 286 | ||
| 287 | /* SATA */ | |
| 288 | #ifdef CONFIG_FSL_SATA_V2 | |
| 289 | #define CONFIG_LIBATA | |
| 290 | #define CONFIG_FSL_SATA | |
| 291 | ||
| 292 | #define CONFIG_SYS_SATA_MAX_DEVICE 2 | |
| 293 | #define CONFIG_SATA1 | |
| 294 | #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR | |
| 295 | #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA | |
| 296 | #define CONFIG_SATA2 | |
| 297 | #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR | |
| 298 | #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA | |
| 299 | ||
| 300 | #define CONFIG_LBA48 | |
| 301 | #define CONFIG_CMD_SATA | |
| 302 | #define CONFIG_DOS_PARTITION | |
| 303 | #define CONFIG_CMD_EXT2 | |
| 304 | #endif | |
| 305 | ||
| 306 | #ifdef CONFIG_FMAN_ENET | |
| 307 | #define CONFIG_MII /* MII PHY management */ | |
| 308 | #define CONFIG_ETHPRIME "FM1@DTSEC1" | |
| 309 | #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ | |
| 310 | #endif | |
| 311 | ||
| 312 | /* | |
| 313 | * Environment | |
| 314 | */ | |
| 315 | #define CONFIG_LOADS_ECHO /* echo on for serial download */ | |
| 316 | #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ | |
| 317 | ||
| 318 | /* | |
| 319 | * Command line configuration. | |
| 320 | */ | |
| 0b2e13d9 CL |
321 | #define CONFIG_CMD_DHCP |
| 322 | #define CONFIG_CMD_ELF | |
| 323 | #define CONFIG_CMD_ERRATA | |
| 324 | #define CONFIG_CMD_GREPENV | |
| 325 | #define CONFIG_CMD_IRQ | |
| 326 | #define CONFIG_CMD_I2C | |
| 327 | #define CONFIG_CMD_MII | |
| 328 | #define CONFIG_CMD_PING | |
| 0b2e13d9 CL |
329 | |
| 330 | #ifdef CONFIG_PCI | |
| 331 | #define CONFIG_CMD_PCI | |
| 0b2e13d9 CL |
332 | #endif |
| 333 | ||
| 334 | /* | |
| 335 | * Miscellaneous configurable options | |
| 336 | */ | |
| 337 | #define CONFIG_SYS_LONGHELP /* undef to save memory */ | |
| 338 | #define CONFIG_CMDLINE_EDITING /* Command-line editing */ | |
| 339 | #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ | |
| 340 | #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ | |
| 341 | #ifdef CONFIG_CMD_KGDB | |
| 342 | #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ | |
| 343 | #else | |
| 344 | #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ | |
| 345 | #endif | |
| 346 | #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) | |
| 347 | #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ | |
| 348 | #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ | |
| 349 | ||
| 350 | /* | |
| 351 | * For booting Linux, the board info and command line data | |
| 352 | * have to be in the first 64 MB of memory, since this is | |
| 353 | * the maximum mapped by the Linux kernel during initialization. | |
| 354 | */ | |
| 355 | #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ | |
| 356 | #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ | |
| 357 | ||
| 358 | #ifdef CONFIG_CMD_KGDB | |
| 359 | #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ | |
| 360 | #endif | |
| 361 | ||
| 362 | /* | |
| 363 | * Environment Configuration | |
| 364 | */ | |
| 365 | #define CONFIG_ROOTPATH "/opt/nfsroot" | |
| 366 | #define CONFIG_BOOTFILE "uImage" | |
| 367 | #define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server*/ | |
| 368 | ||
| 369 | /* default location for tftp and bootm */ | |
| 370 | #define CONFIG_LOADADDR 1000000 | |
| 371 | ||
| 372 | ||
| 373 | #define CONFIG_BAUDRATE 115200 | |
| 374 | ||
| 375 | #define CONFIG_HVBOOT \ | |
| 376 | "setenv bootargs config-addr=0x60000000; " \ | |
| 377 | "bootm 0x01000000 - 0x00f00000" | |
| 378 | ||
| 379 | #ifdef CONFIG_SYS_NO_FLASH | |
| 380 | #ifndef CONFIG_RAMBOOT_PBL | |
| 381 | #define CONFIG_ENV_IS_NOWHERE | |
| 382 | #endif | |
| 383 | #else | |
| 384 | #define CONFIG_FLASH_CFI_DRIVER | |
| 385 | #define CONFIG_SYS_FLASH_CFI | |
| 386 | #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE | |
| 387 | #endif | |
| 388 | ||
| 389 | #if defined(CONFIG_SPIFLASH) | |
| 390 | #define CONFIG_SYS_EXTRA_ENV_RELOC | |
| 391 | #define CONFIG_ENV_IS_IN_SPI_FLASH | |
| 392 | #define CONFIG_ENV_SPI_BUS 0 | |
| 393 | #define CONFIG_ENV_SPI_CS 0 | |
| 394 | #define CONFIG_ENV_SPI_MAX_HZ 10000000 | |
| 395 | #define CONFIG_ENV_SPI_MODE 0 | |
| 396 | #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ | |
| 397 | #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ | |
| 398 | #define CONFIG_ENV_SECT_SIZE 0x10000 | |
| 399 | #elif defined(CONFIG_SDCARD) | |
| 400 | #define CONFIG_SYS_EXTRA_ENV_RELOC | |
| 401 | #define CONFIG_ENV_IS_IN_MMC | |
| 402 | #define CONFIG_SYS_MMC_ENV_DEV 0 | |
| 403 | #define CONFIG_ENV_SIZE 0x2000 | |
| 373762c3 | 404 | #define CONFIG_ENV_OFFSET (512 * 0x800) |
| 0b2e13d9 CL |
405 | #elif defined(CONFIG_NAND) |
| 406 | #define CONFIG_SYS_EXTRA_ENV_RELOC | |
| 407 | #define CONFIG_ENV_IS_IN_NAND | |
| 408 | #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE | |
| 409 | #define CONFIG_ENV_OFFSET (7 * CONFIG_SYS_NAND_BLOCK_SIZE) | |
| 410 | #elif defined(CONFIG_ENV_IS_NOWHERE) | |
| 411 | #define CONFIG_ENV_SIZE 0x2000 | |
| 412 | #else | |
| 413 | #define CONFIG_ENV_IS_IN_FLASH | |
| 414 | #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) | |
| 415 | #define CONFIG_ENV_SIZE 0x2000 | |
| 416 | #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ | |
| 417 | #endif | |
| 418 | ||
| 419 | #define CONFIG_SYS_CLK_FREQ 66666666 | |
| 420 | #define CONFIG_DDR_CLK_FREQ 133333333 | |
| 421 | ||
| 422 | #ifndef __ASSEMBLY__ | |
| 423 | unsigned long get_board_sys_clk(void); | |
| 424 | unsigned long get_board_ddr_clk(void); | |
| 425 | #endif | |
| 426 | ||
| 427 | /* | |
| 428 | * DDR Setup | |
| 429 | */ | |
| 430 | #define CONFIG_SYS_SPD_BUS_NUM 0 | |
| 431 | #define SPD_EEPROM_ADDRESS1 0x52 | |
| 432 | #define SPD_EEPROM_ADDRESS2 0x54 | |
| 433 | #define SPD_EEPROM_ADDRESS3 0x56 | |
| 434 | #define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 /* for p3041/p5010 */ | |
| 435 | #define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ | |
| 436 | ||
| 437 | /* | |
| 438 | * IFC Definitions | |
| 439 | */ | |
| 440 | #define CONFIG_SYS_NOR0_CSPR_EXT (0xf) | |
| 441 | #define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \ | |
| 442 | + 0x8000000) | \ | |
| 443 | CSPR_PORT_SIZE_16 | \ | |
| 444 | CSPR_MSEL_NOR | \ | |
| 445 | CSPR_V) | |
| 446 | #define CONFIG_SYS_NOR1_CSPR_EXT (0xf) | |
| 447 | #define CONFIG_SYS_NOR1_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ | |
| 448 | CSPR_PORT_SIZE_16 | \ | |
| 449 | CSPR_MSEL_NOR | \ | |
| 450 | CSPR_V) | |
| 451 | #define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) | |
| 452 | /* NOR Flash Timing Params */ | |
| 453 | #define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80 | |
| 454 | ||
| 455 | #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ | |
| 456 | FTIM0_NOR_TEADC(0x5) | \ | |
| 457 | FTIM0_NOR_TEAHC(0x5)) | |
| 458 | #define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ | |
| 459 | FTIM1_NOR_TRAD_NOR(0x1A) |\ | |
| 460 | FTIM1_NOR_TSEQRAD_NOR(0x13)) | |
| 461 | #define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ | |
| 462 | FTIM2_NOR_TCH(0x4) | \ | |
| 463 | FTIM2_NOR_TWPH(0x0E) | \ | |
| 464 | FTIM2_NOR_TWP(0x1c)) | |
| 465 | #define CONFIG_SYS_NOR_FTIM3 0x0 | |
| 466 | ||
| 467 | #define CONFIG_SYS_FLASH_QUIET_TEST | |
| 468 | #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ | |
| 469 | ||
| 470 | #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ | |
| 471 | #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ | |
| 472 | #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ | |
| 473 | #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ | |
| 474 | ||
| 475 | #define CONFIG_SYS_FLASH_EMPTY_INFO | |
| 476 | #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS \ | |
| 477 | + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS} | |
| 478 | ||
| 479 | /* NAND Flash on IFC */ | |
| 480 | #define CONFIG_NAND_FSL_IFC | |
| 481 | #define CONFIG_SYS_NAND_MAX_ECCPOS 256 | |
| 482 | #define CONFIG_SYS_NAND_MAX_OOBFREE 2 | |
| 483 | #define CONFIG_SYS_NAND_BASE 0xff800000 | |
| 484 | #define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE) | |
| 485 | ||
| 486 | #define CONFIG_SYS_NAND_CSPR_EXT (0xf) | |
| 487 | #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ | |
| 488 | | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ | |
| 489 | | CSPR_MSEL_NAND /* MSEL = NAND */ \ | |
| 490 | | CSPR_V) | |
| 491 | #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) | |
| 492 | ||
| 493 | #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ | |
| 494 | | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ | |
| 495 | | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ | |
| 496 | | CSOR_NAND_RAL_3 /* RAL = 2Byes */ \ | |
| 497 | | CSOR_NAND_PGS_4K /* Page Size = 4K */ \ | |
| 498 | | CSOR_NAND_SPRZ_224 /* Spare size = 224 */ \ | |
| 499 | | CSOR_NAND_PB(128)) /*Page Per Block = 128*/ | |
| 500 | ||
| 501 | #define CONFIG_SYS_NAND_ONFI_DETECTION | |
| 502 | ||
| 503 | /* ONFI NAND Flash mode0 Timing Params */ | |
| 504 | #define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \ | |
| 505 | FTIM0_NAND_TWP(0x18) | \ | |
| 506 | FTIM0_NAND_TWCHT(0x07) | \ | |
| 507 | FTIM0_NAND_TWH(0x0a)) | |
| 508 | #define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ | |
| 509 | FTIM1_NAND_TWBE(0x39) | \ | |
| 510 | FTIM1_NAND_TRR(0x0e) | \ | |
| 511 | FTIM1_NAND_TRP(0x18)) | |
| 512 | #define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ | |
| 513 | FTIM2_NAND_TREH(0x0a) | \ | |
| 514 | FTIM2_NAND_TWHRE(0x1e)) | |
| 515 | #define CONFIG_SYS_NAND_FTIM3 0x0 | |
| 516 | ||
| 517 | #define CONFIG_SYS_NAND_DDR_LAW 11 | |
| 518 | #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } | |
| 519 | #define CONFIG_SYS_MAX_NAND_DEVICE 1 | |
| 0b2e13d9 CL |
520 | #define CONFIG_CMD_NAND |
| 521 | ||
| 522 | #define CONFIG_SYS_NAND_BLOCK_SIZE (512 * 1024) | |
| 523 | ||
| 524 | #if defined(CONFIG_NAND) | |
| 525 | #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT | |
| 526 | #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR | |
| 527 | #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK | |
| 528 | #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR | |
| 529 | #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 | |
| 530 | #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 | |
| 531 | #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 | |
| 532 | #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 | |
| 533 | #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR0_CSPR_EXT | |
| 534 | #define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR0_CSPR | |
| 535 | #define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK | |
| 536 | #define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR | |
| 537 | #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0 | |
| 538 | #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1 | |
| 539 | #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2 | |
| 540 | #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3 | |
| 541 | #else | |
| 542 | #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT | |
| 543 | #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR | |
| 544 | #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK | |
| 545 | #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR | |
| 546 | #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 | |
| 547 | #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 | |
| 548 | #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 | |
| 549 | #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 | |
| 550 | #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NAND_CSPR_EXT | |
| 551 | #define CONFIG_SYS_CSPR1 CONFIG_SYS_NAND_CSPR | |
| 552 | #define CONFIG_SYS_AMASK1 CONFIG_SYS_NAND_AMASK | |
| 553 | #define CONFIG_SYS_CSOR1 CONFIG_SYS_NAND_CSOR | |
| 554 | #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NAND_FTIM0 | |
| 555 | #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1 | |
| 556 | #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2 | |
| 557 | #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3 | |
| 558 | #endif | |
| 559 | #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR1_CSPR_EXT | |
| 560 | #define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR1_CSPR | |
| 561 | #define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK | |
| 562 | #define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR | |
| 563 | #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0 | |
| 564 | #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1 | |
| 565 | #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2 | |
| 566 | #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3 | |
| 567 | ||
| ab06b236 CL |
568 | /* CPLD on IFC */ |
| 569 | #define CONFIG_SYS_CPLD_BASE 0xffdf0000 | |
| 570 | #define CONFIG_SYS_CPLD_BASE_PHYS (0xf00000000ull | CONFIG_SYS_CPLD_BASE) | |
| 571 | #define CONFIG_SYS_CSPR3_EXT (0xf) | |
| 572 | #define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \ | |
| 573 | | CSPR_PORT_SIZE_8 \ | |
| 574 | | CSPR_MSEL_GPCM \ | |
| 575 | | CSPR_V) | |
| 576 | ||
| 577 | #define CONFIG_SYS_AMASK3 IFC_AMASK(4*1024) | |
| 578 | #define CONFIG_SYS_CSOR3 0x0 | |
| 579 | ||
| 580 | /* CPLD Timing parameters for IFC CS3 */ | |
| 581 | #define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ | |
| 582 | FTIM0_GPCM_TEADC(0x0e) | \ | |
| 583 | FTIM0_GPCM_TEAHC(0x0e)) | |
| 584 | #define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \ | |
| 585 | FTIM1_GPCM_TRAD(0x1f)) | |
| 586 | #define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ | |
| 1b5c2b51 | 587 | FTIM2_GPCM_TCH(0x8) | \ |
| ab06b236 CL |
588 | FTIM2_GPCM_TWP(0x1f)) |
| 589 | #define CONFIG_SYS_CS3_FTIM3 0x0 | |
| 590 | ||
| 0b2e13d9 CL |
591 | #if defined(CONFIG_RAMBOOT_PBL) |
| 592 | #define CONFIG_SYS_RAMBOOT | |
| 593 | #endif | |
| 594 | ||
| 595 | ||
| 596 | /* I2C */ | |
| 597 | #define CONFIG_SYS_FSL_I2C_SPEED 100000 /* I2C speed */ | |
| 598 | #define CONFIG_SYS_FSL_I2C2_SPEED 100000 /* I2C2 speed */ | |
| 599 | #define I2C_MUX_PCA_ADDR_PRI 0x77 /* I2C bus multiplexer,primary */ | |
| 600 | #define I2C_MUX_PCA_ADDR_SEC 0x76 /* I2C bus multiplexer,secondary */ | |
| 601 | ||
| 602 | #define I2C_MUX_CH_DEFAULT 0x8 | |
| 603 | #define I2C_MUX_CH_VOL_MONITOR 0xa | |
| 604 | #define I2C_MUX_CH_VSC3316_FS 0xc | |
| 605 | #define I2C_MUX_CH_VSC3316_BS 0xd | |
| 606 | ||
| 607 | /* Voltage monitor on channel 2*/ | |
| 608 | #define I2C_VOL_MONITOR_ADDR 0x40 | |
| 609 | #define I2C_VOL_MONITOR_BUS_V_OFFSET 0x2 | |
| 610 | #define I2C_VOL_MONITOR_BUS_V_OVF 0x1 | |
| 611 | #define I2C_VOL_MONITOR_BUS_V_SHIFT 3 | |
| 612 | ||
| 613 | /* | |
| 614 | * eSPI - Enhanced SPI | |
| 615 | */ | |
| 616 | #define CONFIG_FSL_ESPI | |
| 0b2e13d9 CL |
617 | #define CONFIG_SPI_FLASH_SST |
| 618 | #define CONFIG_CMD_SF | |
| 619 | #define CONFIG_SF_DEFAULT_SPEED 10000000 | |
| 620 | #define CONFIG_SF_DEFAULT_MODE 0 | |
| 621 | ||
| 622 | ||
| 623 | /* Qman/Bman */ | |
| 624 | #ifndef CONFIG_NOBQFMAN | |
| 625 | #define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ | |
| 626 | #define CONFIG_SYS_BMAN_NUM_PORTALS 50 | |
| 627 | #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 | |
| 628 | #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull | |
| 629 | #define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 | |
| 3fa66db4 JL |
630 | #define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000 |
| 631 | #define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 | |
| 632 | #define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE | |
| 633 | #define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) | |
| 634 | #define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ | |
| 635 | CONFIG_SYS_BMAN_CENA_SIZE) | |
| 636 | #define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) | |
| 637 | #define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 | |
| 0b2e13d9 CL |
638 | #define CONFIG_SYS_QMAN_NUM_PORTALS 50 |
| 639 | #define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 | |
| 640 | #define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull | |
| 641 | #define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 | |
| 3fa66db4 JL |
642 | #define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000 |
| 643 | #define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 | |
| 644 | #define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE | |
| 645 | #define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) | |
| 646 | #define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ | |
| 647 | CONFIG_SYS_QMAN_CENA_SIZE) | |
| 648 | #define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) | |
| 649 | #define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 | |
| 0b2e13d9 CL |
650 | |
| 651 | #define CONFIG_SYS_DPAA_FMAN | |
| 652 | #define CONFIG_SYS_DPAA_PME | |
| 653 | #define CONFIG_SYS_PMAN | |
| 654 | #define CONFIG_SYS_DPAA_DCE | |
| 655 | #define CONFIG_SYS_DPAA_RMAN | |
| 656 | #define CONFIG_SYS_INTERLAKEN | |
| 657 | ||
| 658 | /* Default address of microcode for the Linux Fman driver */ | |
| 659 | #if defined(CONFIG_SPIFLASH) | |
| 660 | /* | |
| 661 | * env is stored at 0x100000, sector size is 0x10000, ucode is stored after | |
| 662 | * env, so we got 0x110000. | |
| 663 | */ | |
| 664 | #define CONFIG_SYS_QE_FW_IN_SPIFLASH | |
| 665 | #define CONFIG_SYS_FMAN_FW_ADDR 0x110000 | |
| 666 | #elif defined(CONFIG_SDCARD) | |
| 667 | /* | |
| 668 | * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is | |
| 373762c3 CL |
669 | * about 1MB (2048 blocks), Env is stored after the image, and the env size is |
| 670 | * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080. | |
| 0b2e13d9 CL |
671 | */ |
| 672 | #define CONFIG_SYS_QE_FMAN_FW_IN_MMC | |
| 373762c3 | 673 | #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820) |
| 0b2e13d9 CL |
674 | #elif defined(CONFIG_NAND) |
| 675 | #define CONFIG_SYS_QE_FMAN_FW_IN_NAND | |
| 676 | #define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE) | |
| 677 | #else | |
| 678 | #define CONFIG_SYS_QE_FMAN_FW_IN_NOR | |
| 679 | #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 | |
| 680 | #endif | |
| 681 | #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 | |
| 682 | #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) | |
| 683 | #endif /* CONFIG_NOBQFMAN */ | |
| 684 | ||
| 685 | #ifdef CONFIG_SYS_DPAA_FMAN | |
| 686 | #define CONFIG_FMAN_ENET | |
| 687 | #define CONFIG_PHYLIB_10G | |
| 688 | #define CONFIG_PHY_VITESSE | |
| 689 | #define CONFIG_PHY_CORTINA | |
| a8efe79c | 690 | #define CONFIG_SYS_CORTINA_FW_IN_NOR |
| 0b2e13d9 CL |
691 | #define CONFIG_CORTINA_FW_ADDR 0xefe00000 |
| 692 | #define CONFIG_CORTINA_FW_LENGTH 0x40000 | |
| 693 | #define CONFIG_PHY_TERANETICS | |
| 694 | #define SGMII_PHY_ADDR1 0x0 | |
| 695 | #define SGMII_PHY_ADDR2 0x1 | |
| 696 | #define SGMII_PHY_ADDR3 0x2 | |
| 697 | #define SGMII_PHY_ADDR4 0x3 | |
| 698 | #define SGMII_PHY_ADDR5 0x4 | |
| 699 | #define SGMII_PHY_ADDR6 0x5 | |
| 700 | #define SGMII_PHY_ADDR7 0x6 | |
| 701 | #define SGMII_PHY_ADDR8 0x7 | |
| 702 | #define FM1_10GEC1_PHY_ADDR 0x10 | |
| 703 | #define FM1_10GEC2_PHY_ADDR 0x11 | |
| 704 | #define FM2_10GEC1_PHY_ADDR 0x12 | |
| 705 | #define FM2_10GEC2_PHY_ADDR 0x13 | |
| 706 | #define CORTINA_PHY_ADDR1 FM1_10GEC1_PHY_ADDR | |
| 707 | #define CORTINA_PHY_ADDR2 FM1_10GEC2_PHY_ADDR | |
| 708 | #define CORTINA_PHY_ADDR3 FM2_10GEC1_PHY_ADDR | |
| 709 | #define CORTINA_PHY_ADDR4 FM2_10GEC2_PHY_ADDR | |
| 710 | #endif | |
| 711 | ||
| 712 | ||
| 713 | /* SATA */ | |
| 714 | #ifdef CONFIG_FSL_SATA_V2 | |
| 715 | #define CONFIG_LIBATA | |
| 716 | #define CONFIG_FSL_SATA | |
| 717 | ||
| 718 | #define CONFIG_SYS_SATA_MAX_DEVICE 2 | |
| 719 | #define CONFIG_SATA1 | |
| 720 | #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR | |
| 721 | #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA | |
| 722 | #define CONFIG_SATA2 | |
| 723 | #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR | |
| 724 | #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA | |
| 725 | ||
| 726 | #define CONFIG_LBA48 | |
| 727 | #define CONFIG_CMD_SATA | |
| 728 | #define CONFIG_DOS_PARTITION | |
| 729 | #define CONFIG_CMD_EXT2 | |
| 730 | #endif | |
| 731 | ||
| 732 | #ifdef CONFIG_FMAN_ENET | |
| 733 | #define CONFIG_MII /* MII PHY management */ | |
| 734 | #define CONFIG_ETHPRIME "FM1@DTSEC1" | |
| 735 | #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ | |
| 736 | #endif | |
| 737 | ||
| 738 | /* | |
| 739 | * USB | |
| 740 | */ | |
| 741 | #define CONFIG_CMD_USB | |
| 742 | #define CONFIG_USB_STORAGE | |
| 743 | #define CONFIG_USB_EHCI | |
| 744 | #define CONFIG_USB_EHCI_FSL | |
| 745 | #define CONFIG_EHCI_HCD_INIT_AFTER_RESET | |
| 746 | #define CONFIG_CMD_EXT2 | |
| 747 | #define CONFIG_HAS_FSL_DR_USB | |
| 748 | ||
| 749 | #define CONFIG_MMC | |
| 750 | ||
| 751 | #ifdef CONFIG_MMC | |
| 752 | #define CONFIG_FSL_ESDHC | |
| 753 | #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR | |
| 754 | #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT | |
| 755 | #define CONFIG_CMD_MMC | |
| 756 | #define CONFIG_GENERIC_MMC | |
| 757 | #define CONFIG_CMD_EXT2 | |
| 758 | #define CONFIG_CMD_FAT | |
| 759 | #define CONFIG_DOS_PARTITION | |
| 929dfdc2 | 760 | #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 |
| 0b2e13d9 CL |
761 | #endif |
| 762 | ||
| 737537ef RG |
763 | /* Hash command with SHA acceleration supported in hardware */ |
| 764 | #ifdef CONFIG_FSL_CAAM | |
| 765 | #define CONFIG_CMD_HASH | |
| 766 | #define CONFIG_SHA_HW_ACCEL | |
| 767 | #endif | |
| 768 | ||
| 0b2e13d9 CL |
769 | #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ |
| 770 | ||
| 771 | #define __USB_PHY_TYPE utmi | |
| 772 | ||
| 773 | /* | |
| 774 | * T4240 has 3 DDR controllers. Default to 3-way interleaving. It can be | |
| 775 | * 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to 2-way | |
| 776 | * interleaving. It can be cacheline, page, bank, superbank. | |
| 777 | * See doc/README.fsl-ddr for details. | |
| 778 | */ | |
| 1a344456 | 779 | #ifdef CONFIG_PPC_T4240 |
| 0b2e13d9 | 780 | #define CTRL_INTLV_PREFERED 3way_4KB |
| 1a344456 CL |
781 | #else |
| 782 | #define CTRL_INTLV_PREFERED cacheline | |
| 783 | #endif | |
| 0b2e13d9 CL |
784 | |
| 785 | #define CONFIG_EXTRA_ENV_SETTINGS \ | |
| 786 | "hwconfig=fsl_ddr:" \ | |
| 787 | "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) "," \ | |
| 788 | "bank_intlv=auto;" \ | |
| 789 | "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ | |
| 790 | "netdev=eth0\0" \ | |
| 791 | "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ | |
| 792 | "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ | |
| 793 | "tftpflash=tftpboot $loadaddr $uboot && " \ | |
| 794 | "protect off $ubootaddr +$filesize && " \ | |
| 795 | "erase $ubootaddr +$filesize && " \ | |
| 796 | "cp.b $loadaddr $ubootaddr $filesize && " \ | |
| 797 | "protect on $ubootaddr +$filesize && " \ | |
| 798 | "cmp.b $loadaddr $ubootaddr $filesize\0" \ | |
| 799 | "consoledev=ttyS0\0" \ | |
| 800 | "ramdiskaddr=2000000\0" \ | |
| 801 | "ramdiskfile=t4240rdb/ramdisk.uboot\0" \ | |
| 802 | "fdtaddr=c00000\0" \ | |
| 803 | "fdtfile=t4240rdb/t4240rdb.dtb\0" \ | |
| 804 | "bdev=sda3\0" | |
| 805 | ||
| 806 | #define CONFIG_HVBOOT \ | |
| 807 | "setenv bootargs config-addr=0x60000000; " \ | |
| 808 | "bootm 0x01000000 - 0x00f00000" | |
| 809 | ||
| 810 | #define CONFIG_LINUX \ | |
| 811 | "setenv bootargs root=/dev/ram rw " \ | |
| 812 | "console=$consoledev,$baudrate $othbootargs;" \ | |
| 813 | "setenv ramdiskaddr 0x02000000;" \ | |
| 814 | "setenv fdtaddr 0x00c00000;" \ | |
| 815 | "setenv loadaddr 0x1000000;" \ | |
| 816 | "bootm $loadaddr $ramdiskaddr $fdtaddr" | |
| 817 | ||
| 818 | #define CONFIG_HDBOOT \ | |
| 819 | "setenv bootargs root=/dev/$bdev rw " \ | |
| 820 | "console=$consoledev,$baudrate $othbootargs;" \ | |
| 821 | "tftp $loadaddr $bootfile;" \ | |
| 822 | "tftp $fdtaddr $fdtfile;" \ | |
| 823 | "bootm $loadaddr - $fdtaddr" | |
| 824 | ||
| 825 | #define CONFIG_NFSBOOTCOMMAND \ | |
| 826 | "setenv bootargs root=/dev/nfs rw " \ | |
| 827 | "nfsroot=$serverip:$rootpath " \ | |
| 828 | "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ | |
| 829 | "console=$consoledev,$baudrate $othbootargs;" \ | |
| 830 | "tftp $loadaddr $bootfile;" \ | |
| 831 | "tftp $fdtaddr $fdtfile;" \ | |
| 832 | "bootm $loadaddr - $fdtaddr" | |
| 833 | ||
| 834 | #define CONFIG_RAMBOOTCOMMAND \ | |
| 835 | "setenv bootargs root=/dev/ram rw " \ | |
| 836 | "console=$consoledev,$baudrate $othbootargs;" \ | |
| 837 | "tftp $ramdiskaddr $ramdiskfile;" \ | |
| 838 | "tftp $loadaddr $bootfile;" \ | |
| 839 | "tftp $fdtaddr $fdtfile;" \ | |
| 840 | "bootm $loadaddr $ramdiskaddr $fdtaddr" | |
| 841 | ||
| 842 | #define CONFIG_BOOTCOMMAND CONFIG_LINUX | |
| 843 | ||
| 844 | #include <asm/fsl_secure_boot.h> | |
| 845 | ||
| 846 | #ifdef CONFIG_SECURE_BOOT | |
| 847 | /* Secure Boot target was not getting build for T4240 because of | |
| 848 | * increased binary size. So the size is being reduced by removing USB | |
| 849 | * which is anyways not used in Secure Environment. | |
| 850 | */ | |
| 851 | #undef CONFIG_CMD_USB | |
| 789490b6 | 852 | #define CONFIG_CMD_BLOB |
| 0b2e13d9 CL |
853 | #endif |
| 854 | ||
| 855 | #endif /* __CONFIG_H */ |