[people/ms/u-boot.git] / include / configs / advantech_dms-ba16.h

/*
 * Copyright (C) 2016 Timesys Corporation
 * Copyright (C) 2016 Advantech Corporation
 * Copyright (C) 2012 Freescale Semiconductor, Inc.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __ADVANTECH_DMSBA16_CONFIG_H
#define __ADVANTECH_DMSBA16_CONFIG_H

#include <asm/arch/imx-regs.h>
#include <asm/imx-common/gpio.h>

#define CONFIG_BOARD_NAME	"Advantech DMS-BA16"

#define CONFIG_MXC_UART_BASE	UART4_BASE
#define CONSOLE_DEV	"ttymxc3"
#define CONFIG_EXTRA_BOOTARGS	"panic=10"

#define CONFIG_BOOT_DIR	""
#define CONFIG_LOADCMD "fatload"
#define CONFIG_RFSPART "2"

#define CONFIG_SUPPORT_EMMC_BOOT

#include "mx6_common.h"
#include <linux/sizes.h>

#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
#define CONFIG_REVISION_TAG
#define CONFIG_SYS_MALLOC_LEN		(10 * SZ_1M)

#define CONFIG_MXC_GPIO
#define CONFIG_MXC_UART

#define CONFIG_CMD_FUSE
#define CONFIG_MXC_OCOTP

/* SATA Configs */
#define CONFIG_CMD_SATA
#define CONFIG_DWC_AHSATA
#define CONFIG_SYS_SATA_MAX_DEVICE	1
#define CONFIG_DWC_AHSATA_PORT_ID	0
#define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_ARB_BASE_ADDR
#define CONFIG_LBA48
#define CONFIG_LIBATA

/* MMC Configs */
#define CONFIG_FSL_ESDHC
#define CONFIG_FSL_USDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR      0
#define CONFIG_GENERIC_MMC
#define CONFIG_BOUNCE_BUFFER
#define CONFIG_DOS_PARTITION

/* USB Configs */
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_MX6
#define CONFIG_USB_STORAGE
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
#define CONFIG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS	0
#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP

#define CONFIG_USBD_HS
#define CONFIG_USB_FUNCTION_MASS_STORAGE
#define CONFIG_USB_GADGET_VBUS_DRAW 2

/* Networking Configs */
#define CONFIG_FEC_MXC
#define CONFIG_MII
#define IMX_FEC_BASE			ENET_BASE_ADDR
#define CONFIG_FEC_XCV_TYPE		RGMII
#define CONFIG_ETHPRIME		"FEC"
#define CONFIG_FEC_MXC_PHYADDR		4
#define CONFIG_PHYLIB
#define CONFIG_PHY_ATHEROS

/* Serial Flash */
#ifdef CONFIG_CMD_SF
#define CONFIG_MXC_SPI
#define CONFIG_SF_DEFAULT_BUS		0
#define CONFIG_SF_DEFAULT_CS		0
#define CONFIG_SF_DEFAULT_SPEED	20000000
#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
#endif

/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX	1
#define CONFIG_BAUDRATE	115200

/* Command definition */
#define CONFIG_CMD_BMODE

#define CONFIG_LOADADDR	0x12000000
#define CONFIG_SYS_TEXT_BASE	0x17800000

#define CONFIG_EXTRA_ENV_SETTINGS \
	"script=boot.scr\0" \
	"image=" CONFIG_BOOT_DIR "/uImage\0" \
	"uboot=u-boot.imx\0" \
	"fdt_file=" CONFIG_BOOT_DIR "/" CONFIG_DEFAULT_FDT_FILE "\0" \
	"fdt_addr=0x18000000\0" \
	"boot_fdt=yes\0" \
	"ip_dyn=yes\0" \
	"console=" CONSOLE_DEV "\0" \
	"fdt_high=0xffffffff\0"	  \
	"initrd_high=0xffffffff\0" \
	"sddev=0\0" \
	"emmcdev=1\0" \
	"partnum=1\0" \
	"loadcmd=" CONFIG_LOADCMD "\0" \
	"rfspart=" CONFIG_RFSPART "\0" \
	"update_sd_firmware=" \
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"if mmc dev ${mmcdev}; then "	\
			"if ${get_cmd} ${update_sd_firmware_filename}; then " \
				"setexpr fw_sz ${filesize} / 0x200; " \
				"setexpr fw_sz ${fw_sz} + 1; "	\
				"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
			"fi; "	\
		"fi\0" \
	"update_sf_uboot=" \
		"if tftp $loadaddr $uboot; then " \
			"sf probe; " \
			"sf erase 0 0xC0000; " \
			"sf write $loadaddr 0x400 $filesize; " \
			"echo 'U-Boot upgraded. Please reset'; " \
		"fi\0" \
	"setargs=setenv bootargs console=${console},${baudrate} " \
		"root=/dev/${rootdev} rw rootwait " CONFIG_EXTRA_BOOTARGS "\0" \
	"loadbootscript=" \
		"${loadcmd} ${dev} ${devnum}:${partnum} ${loadaddr} ${script};\0" \
	"bootscript=echo Running bootscript from ${dev}:${devnum}:${partnum};" \
		" source\0" \
	"loadimage=" \
		"${loadcmd} ${dev} ${devnum}:${partnum} ${loadaddr} ${image}\0" \
	"loadfdt=${loadcmd} ${dev} ${devnum}:${partnum} ${fdt_addr} ${fdt_file}\0" \
	"tryboot=" \
		"if run loadbootscript; then " \
			"run bootscript; " \
		"else " \
			"if run loadimage; then " \
				"run doboot; " \
			"fi; " \
		"fi;\0" \
	"doboot=echo Booting from ${dev}:${devnum}:${partnum} ...; " \
		"run setargs; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if run loadfdt; then " \
				"bootm ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootm; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootm; " \
		"fi;\0" \
	"netargs=setenv bootargs console=${console},${baudrate} " \
		"root=/dev/nfs " \
		"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
	"netboot=echo Booting from net ...; " \
		"run netargs; " \
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"${get_cmd} ${image}; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
				"bootm ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootm; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootm; " \
		"fi;\0" \

#define CONFIG_BOOTCOMMAND \
	"usb start; " \
	"setenv dev usb; " \
	"setenv devnum 0; " \
	"setenv rootdev sda${rfspart}; " \
	"run tryboot; " \
	\
	"setenv dev mmc; " \
	"setenv rootdev mmcblk0p${rfspart}; " \
	\
	"setenv devnum ${sddev}; " \
	"if mmc dev ${devnum}; then " \
		"run tryboot; " \
	"fi; " \
	\
	"setenv devnum ${emmcdev}; " \
	"setenv rootdev mmcblk${emmcdev}p${rfspart}; " \
	"if mmc dev ${devnum}; then " \
		"run tryboot; " \
	"fi; " \
	\
	"bmode usb; " \

#define CONFIG_ARP_TIMEOUT     200UL

/* Miscellaneous configurable options */
#define CONFIG_SYS_LONGHELP
#define CONFIG_AUTO_COMPLETE

/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE

#define CONFIG_SYS_MEMTEST_START       0x10000000
#define CONFIG_SYS_MEMTEST_END         0x10010000
#define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000

#define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR

#define CONFIG_CMDLINE_EDITING
#define CONFIG_STACKSIZE               (128 * 1024)

/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS           1
#define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR

#define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/* FLASH and environment organization */
#define CONFIG_SYS_NO_FLASH

#define CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_ENV_SIZE                 (8 * 1024)
#define CONFIG_ENV_OFFSET               (768 * 1024)
#define CONFIG_ENV_SECT_SIZE            (64 * 1024)
#define CONFIG_ENV_SPI_BUS              CONFIG_SF_DEFAULT_BUS
#define CONFIG_ENV_SPI_CS               CONFIG_SF_DEFAULT_CS
#define CONFIG_ENV_SPI_MODE             CONFIG_SF_DEFAULT_MODE
#define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED

#ifndef CONFIG_SYS_DCACHE_OFF
#endif

#define CONFIG_SYS_FSL_USDHC_NUM        3

/* Framebuffer */
#define CONFIG_VIDEO_IPUV3
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_SPLASH_SCREEN
#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_BMP_LOGO
#define CONFIG_IPUV3_CLK                260000000
#define CONFIG_IMX_HDMI
#define CONFIG_IMX_VIDEO_SKIP

#define CONFIG_PWM_IMX
#define CONFIG_IMX6_PWM_PER_CLK         66000000

#undef CONFIG_CMD_PCI
#ifdef CONFIG_CMD_PCI
#define CONFIG_PCI_SCAN_SHOW
#define CONFIG_PCIE_IMX
#define CONFIG_PCIE_IMX_PERST_GPIO      IMX_GPIO_NR(7, 12)
#define CONFIG_PCIE_IMX_POWER_GPIO      IMX_GPIO_NR(1, 5)
#endif

/* I2C Configs */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_SPEED            100000
#define CONFIG_SYS_I2C_MXC_I2C1
#define CONFIG_SYS_I2C_MXC_I2C2
#define CONFIG_SYS_I2C_MXC_I2C3

#endif	/* __ADVANTECH_DMSBA16_CONFIG_H */
Commit	Line	Data
ff383220 AB	1	/*
	2	* Copyright (C) 2016 Timesys Corporation
	3	* Copyright (C) 2016 Advantech Corporation
	4	* Copyright (C) 2012 Freescale Semiconductor, Inc.
	5	*
	6	* SPDX-License-Identifier: GPL-2.0+
	7	*/
	8
	9	#ifndef __ADVANTECH_DMSBA16_CONFIG_H
	10	#define __ADVANTECH_DMSBA16_CONFIG_H
	11
	12	#include <asm/arch/imx-regs.h>
	13	#include <asm/imx-common/gpio.h>
	14
	15	#define CONFIG_BOARD_NAME "Advantech DMS-BA16"
ff383220 AB	16
ff383220 AB	17	#define CONFIG_MXC_UART_BASE UART4_BASE
12ca05a3	18	#define CONSOLE_DEV "ttymxc3"
ff383220 AB	19	#define CONFIG_EXTRA_BOOTARGS "panic=10"
	20
	21	#define CONFIG_BOOT_DIR ""
	22	#define CONFIG_LOADCMD "fatload"
	23	#define CONFIG_RFSPART "2"
	24
	25	#define CONFIG_SUPPORT_EMMC_BOOT
	26
	27	#include "mx6_common.h"
	28	#include <linux/sizes.h>
	29
ff383220 AB	30	#define CONFIG_CMDLINE_TAG
	31	#define CONFIG_SETUP_MEMORY_TAGS
	32	#define CONFIG_INITRD_TAG
	33	#define CONFIG_REVISION_TAG
	34	#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
	35
ff383220 AB	36	#define CONFIG_MXC_GPIO
	37	#define CONFIG_MXC_UART
	38
	39	#define CONFIG_CMD_FUSE
	40	#define CONFIG_MXC_OCOTP
	41
	42	/* SATA Configs */
	43	#define CONFIG_CMD_SATA
	44	#define CONFIG_DWC_AHSATA
	45	#define CONFIG_SYS_SATA_MAX_DEVICE 1
	46	#define CONFIG_DWC_AHSATA_PORT_ID 0
	47	#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
	48	#define CONFIG_LBA48
	49	#define CONFIG_LIBATA
	50
	51	/* MMC Configs */
	52	#define CONFIG_FSL_ESDHC
	53	#define CONFIG_FSL_USDHC
	54	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
ff383220 AB	55	#define CONFIG_GENERIC_MMC
	56	#define CONFIG_BOUNCE_BUFFER
	57	#define CONFIG_DOS_PARTITION
	58
	59	/* USB Configs */
	60	#define CONFIG_USB_EHCI
	61	#define CONFIG_USB_EHCI_MX6
	62	#define CONFIG_USB_STORAGE
	63	#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
	64	#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
	65	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
	66	#define CONFIG_MXC_USB_FLAGS 0
ff383220 AB	67	#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
	68
	69	#define CONFIG_USBD_HS
	70	#define CONFIG_USB_FUNCTION_MASS_STORAGE
	71	#define CONFIG_USB_GADGET_VBUS_DRAW 2
	72
	73	/* Networking Configs */
	74	#define CONFIG_FEC_MXC
	75	#define CONFIG_MII
	76	#define IMX_FEC_BASE ENET_BASE_ADDR
	77	#define CONFIG_FEC_XCV_TYPE RGMII
	78	#define CONFIG_ETHPRIME "FEC"
	79	#define CONFIG_FEC_MXC_PHYADDR 4
	80	#define CONFIG_PHYLIB
	81	#define CONFIG_PHY_ATHEROS
	82
	83	/* Serial Flash */
	84	#ifdef CONFIG_CMD_SF
	85	#define CONFIG_MXC_SPI
	86	#define CONFIG_SF_DEFAULT_BUS 0
	87	#define CONFIG_SF_DEFAULT_CS 0
	88	#define CONFIG_SF_DEFAULT_SPEED 20000000
	89	#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
	90	#endif
	91
	92	/* allow to overwrite serial and ethaddr */
	93	#define CONFIG_ENV_OVERWRITE
	94	#define CONFIG_CONS_INDEX 1
	95	#define CONFIG_BAUDRATE 115200
	96
	97	/* Command definition */
	98	#define CONFIG_CMD_BMODE
	99
	100	#define CONFIG_LOADADDR 0x12000000
	101	#define CONFIG_SYS_TEXT_BASE 0x17800000
	102
	103	#define CONFIG_EXTRA_ENV_SETTINGS \
	104	"script=boot.scr\0" \
	105	"image=" CONFIG_BOOT_DIR "/uImage\0" \
	106	"uboot=u-boot.imx\0" \
	107	"fdt_file=" CONFIG_BOOT_DIR "/" CONFIG_DEFAULT_FDT_FILE "\0" \
	108	"fdt_addr=0x18000000\0" \
	109	"boot_fdt=yes\0" \
	110	"ip_dyn=yes\0" \
12ca05a3	111	"console=" CONSOLE_DEV "\0" \
ff383220 AB	112	"fdt_high=0xffffffff\0" \
	113	"initrd_high=0xffffffff\0" \
	114	"sddev=0\0" \
	115	"emmcdev=1\0" \
	116	"partnum=1\0" \
	117	"loadcmd=" CONFIG_LOADCMD "\0" \
	118	"rfspart=" CONFIG_RFSPART "\0" \
	119	"update_sd_firmware=" \
	120	"if test ${ip_dyn} = yes; then " \
	121	"setenv get_cmd dhcp; " \
	122	"else " \
	123	"setenv get_cmd tftp; " \
	124	"fi; " \
	125	"if mmc dev ${mmcdev}; then " \
	126	"if ${get_cmd} ${update_sd_firmware_filename}; then " \
	127	"setexpr fw_sz ${filesize} / 0x200; " \
	128	"setexpr fw_sz ${fw_sz} + 1; " \
	129	"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
	130	"fi; " \
	131	"fi\0" \
	132	"update_sf_uboot=" \
	133	"if tftp $loadaddr $uboot; then " \
	134	"sf probe; " \
	135	"sf erase 0 0xC0000; " \
	136	"sf write $loadaddr 0x400 $filesize; " \
	137	"echo 'U-Boot upgraded. Please reset'; " \
	138	"fi\0" \
	139	"setargs=setenv bootargs console=${console},${baudrate} " \
	140	"root=/dev/${rootdev} rw rootwait " CONFIG_EXTRA_BOOTARGS "\0" \
	141	"loadbootscript=" \
	142	"${loadcmd} ${dev} ${devnum}:${partnum} ${loadaddr} ${script};\0" \
	143	"bootscript=echo Running bootscript from ${dev}:${devnum}:${partnum};" \
	144	" source\0" \
	145	"loadimage=" \
	146	"${loadcmd} ${dev} ${devnum}:${partnum} ${loadaddr} ${image}\0" \
	147	"loadfdt=${loadcmd} ${dev} ${devnum}:${partnum} ${fdt_addr} ${fdt_file}\0" \
	148	"tryboot=" \
	149	"if run loadbootscript; then " \
	150	"run bootscript; " \
	151	"else " \
	152	"if run loadimage; then " \
	153	"run doboot; " \
	154	"fi; " \
	155	"fi;\0" \
	156	"doboot=echo Booting from ${dev}:${devnum}:${partnum} ...; " \
	157	"run setargs; " \
	158	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	159	"if run loadfdt; then " \
	160	"bootm ${loadaddr} - ${fdt_addr}; " \
	161	"else " \
	162	"if test ${boot_fdt} = try; then " \
	163	"bootm; " \
	164	"else " \
	165	"echo WARN: Cannot load the DT; " \
	166	"fi; " \
	167	"fi; " \
	168	"else " \
	169	"bootm; " \
	170	"fi;\0" \
	171	"netargs=setenv bootargs console=${console},${baudrate} " \
	172	"root=/dev/nfs " \
	173	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
	174	"netboot=echo Booting from net ...; " \
	175	"run netargs; " \
176	"if test ${ip_dyn} = yes; then " \
177	"setenv get_cmd dhcp; " \
178	"else " \
179	"setenv get_cmd tftp; " \
180	"fi; " \
181	"${get_cmd} ${image}; " \
182	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
183	"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
184	"bootm ${loadaddr} - ${fdt_addr}; " \
185	"else " \
186	"if test ${boot_fdt} = try; then " \
187	"bootm; " \
188	"else " \
189	"echo WARN: Cannot load the DT; " \
190	"fi; " \
191	"fi; " \
192	"else " \
193	"bootm; " \
194	"fi;\0" \
195
196	#define CONFIG_BOOTCOMMAND \
197	"usb start; " \
198	"setenv dev usb; " \
199	"setenv devnum 0; " \
200	"setenv rootdev sda${rfspart}; " \
201	"run tryboot; " \
202	\
203	"setenv dev mmc; " \
204	"setenv rootdev mmcblk0p${rfspart}; " \
205	\
206	"setenv devnum ${sddev}; " \
207	"if mmc dev ${devnum}; then " \
208	"run tryboot; " \
209	"fi; " \
210	\
211	"setenv devnum ${emmcdev}; " \
212	"setenv rootdev mmcblk${emmcdev}p${rfspart}; " \
213	"if mmc dev ${devnum}; then " \
214	"run tryboot; " \
215	"fi; " \
216	\
217	"bmode usb; " \
218
219	#define CONFIG_ARP_TIMEOUT 200UL
220
221	/* Miscellaneous configurable options */
222	#define CONFIG_SYS_LONGHELP
223	#define CONFIG_AUTO_COMPLETE
224
225	/* Print Buffer Size */
226	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
227	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
228
229	#define CONFIG_SYS_MEMTEST_START 0x10000000
230	#define CONFIG_SYS_MEMTEST_END 0x10010000
231	#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
232
233	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
234
235	#define CONFIG_CMDLINE_EDITING
236	#define CONFIG_STACKSIZE (128 * 1024)
237
238	/* Physical Memory Map */
239	#define CONFIG_NR_DRAM_BANKS 1
240	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
241
242	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
243	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
244	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
245
246	#define CONFIG_SYS_INIT_SP_OFFSET \
247	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
248	#define CONFIG_SYS_INIT_SP_ADDR \
249	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
250
251	/* FLASH and environment organization */
252	#define CONFIG_SYS_NO_FLASH
253
254	#define CONFIG_ENV_IS_IN_SPI_FLASH
255	#define CONFIG_ENV_SIZE (8 * 1024)
256	#define CONFIG_ENV_OFFSET (768 * 1024)
257	#define CONFIG_ENV_SECT_SIZE (64 * 1024)
258	#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
259	#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
260	#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
261	#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
262
263	#ifndef CONFIG_SYS_DCACHE_OFF
264	#endif
265
266	#define CONFIG_SYS_FSL_USDHC_NUM 3
267
268	/* Framebuffer */
ff383220	269	#define CONFIG_VIDEO_IPUV3
ff383220 AB	270	#define CONFIG_VIDEO_BMP_RLE8
	271	#define CONFIG_SPLASH_SCREEN
	272	#define CONFIG_SPLASH_SCREEN_ALIGN
	273	#define CONFIG_BMP_16BPP
	274	#define CONFIG_VIDEO_LOGO
	275	#define CONFIG_VIDEO_BMP_LOGO
	276	#define CONFIG_IPUV3_CLK 260000000
	277	#define CONFIG_IMX_HDMI
	278	#define CONFIG_IMX_VIDEO_SKIP
	279
	280	#define CONFIG_PWM_IMX
	281	#define CONFIG_IMX6_PWM_PER_CLK 66000000
	282
	283	#undef CONFIG_CMD_PCI
	284	#ifdef CONFIG_CMD_PCI
ff383220 AB	285	#define CONFIG_PCI_SCAN_SHOW
	286	#define CONFIG_PCIE_IMX
	287	#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(7, 12)
	288	#define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(1, 5)
	289	#endif
	290
	291	/* I2C Configs */
	292	#define CONFIG_SYS_I2C
	293	#define CONFIG_SYS_I2C_MXC
	294	#define CONFIG_SYS_I2C_SPEED 100000
	295	#define CONFIG_SYS_I2C_MXC_I2C1
	296	#define CONFIG_SYS_I2C_MXC_I2C2
	297	#define CONFIG_SYS_I2C_MXC_I2C3
	298
	299	#endif /* __ADVANTECH_DMSBA16_CONFIG_H */