[people/ms/u-boot.git] / include / configs / advantech_dms-ba16.h

/*
 * Copyright (C) 2016 Timesys Corporation
 * Copyright (C) 2016 Advantech Corporation
 * Copyright (C) 2012 Freescale Semiconductor, Inc.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __ADVANTECH_DMSBA16_CONFIG_H
#define __ADVANTECH_DMSBA16_CONFIG_H

#include <asm/arch/imx-regs.h>
#include <asm/imx-common/gpio.h>

#define CONFIG_BOARD_NAME	"Advantech DMS-BA16"

#define CONFIG_MXC_UART_BASE	UART4_BASE
#define CONSOLE_DEV	"ttymxc3"
#define CONFIG_EXTRA_BOOTARGS	"panic=10"

#define CONFIG_BOOT_DIR	""
#define CONFIG_LOADCMD "fatload"
#define CONFIG_RFSPART "2"

#define CONFIG_SUPPORT_EMMC_BOOT

#include "mx6_common.h"
#include <linux/sizes.h>

#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
#define CONFIG_REVISION_TAG
#define CONFIG_SYS_MALLOC_LEN		(10 * SZ_1M)

#define CONFIG_BOARD_EARLY_INIT_F

#define CONFIG_MXC_GPIO
#define CONFIG_MXC_UART

#define CONFIG_CMD_FUSE
#define CONFIG_MXC_OCOTP

/* SATA Configs */
#define CONFIG_CMD_SATA
#define CONFIG_DWC_AHSATA
#define CONFIG_SYS_SATA_MAX_DEVICE	1
#define CONFIG_DWC_AHSATA_PORT_ID	0
#define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_ARB_BASE_ADDR
#define CONFIG_LBA48
#define CONFIG_LIBATA

/* MMC Configs */
#define CONFIG_FSL_ESDHC
#define CONFIG_FSL_USDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR      0
#define CONFIG_GENERIC_MMC
#define CONFIG_BOUNCE_BUFFER
#define CONFIG_DOS_PARTITION

/* USB Configs */
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_MX6
#define CONFIG_USB_STORAGE
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
#define CONFIG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS	0
#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP

#define CONFIG_USBD_HS
#define CONFIG_USB_FUNCTION_MASS_STORAGE
#define CONFIG_USB_GADGET_VBUS_DRAW 2

/* Networking Configs */
#define CONFIG_FEC_MXC
#define CONFIG_MII
#define IMX_FEC_BASE			ENET_BASE_ADDR
#define CONFIG_FEC_XCV_TYPE		RGMII
#define CONFIG_ETHPRIME		"FEC"
#define CONFIG_FEC_MXC_PHYADDR		4
#define CONFIG_PHYLIB
#define CONFIG_PHY_ATHEROS

/* Serial Flash */
#ifdef CONFIG_CMD_SF
#define CONFIG_MXC_SPI
#define CONFIG_SF_DEFAULT_BUS		0
#define CONFIG_SF_DEFAULT_CS		0
#define CONFIG_SF_DEFAULT_SPEED	20000000
#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
#endif

/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX	1
#define CONFIG_BAUDRATE	115200

/* Command definition */
#define CONFIG_CMD_BMODE

#define CONFIG_LOADADDR	0x12000000
#define CONFIG_SYS_TEXT_BASE	0x17800000

#define CONFIG_EXTRA_ENV_SETTINGS \
	"script=boot.scr\0" \
	"image=" CONFIG_BOOT_DIR "/uImage\0" \
	"uboot=u-boot.imx\0" \
	"fdt_file=" CONFIG_BOOT_DIR "/" CONFIG_DEFAULT_FDT_FILE "\0" \
	"fdt_addr=0x18000000\0" \
	"boot_fdt=yes\0" \
	"ip_dyn=yes\0" \
	"console=" CONSOLE_DEV "\0" \
	"fdt_high=0xffffffff\0"	  \
	"initrd_high=0xffffffff\0" \
	"sddev=0\0" \
	"emmcdev=1\0" \
	"partnum=1\0" \
	"loadcmd=" CONFIG_LOADCMD "\0" \
	"rfspart=" CONFIG_RFSPART "\0" \
	"update_sd_firmware=" \
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"if mmc dev ${mmcdev}; then "	\
			"if ${get_cmd} ${update_sd_firmware_filename}; then " \
				"setexpr fw_sz ${filesize} / 0x200; " \
				"setexpr fw_sz ${fw_sz} + 1; "	\
				"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
			"fi; "	\
		"fi\0" \
	"update_sf_uboot=" \
		"if tftp $loadaddr $uboot; then " \
			"sf probe; " \
			"sf erase 0 0xC0000; " \
			"sf write $loadaddr 0x400 $filesize; " \
			"echo 'U-Boot upgraded. Please reset'; " \
		"fi\0" \
	"setargs=setenv bootargs console=${console},${baudrate} " \
		"root=/dev/${rootdev} rw rootwait " CONFIG_EXTRA_BOOTARGS "\0" \
	"loadbootscript=" \
		"${loadcmd} ${dev} ${devnum}:${partnum} ${loadaddr} ${script};\0" \
	"bootscript=echo Running bootscript from ${dev}:${devnum}:${partnum};" \
		" source\0" \
	"loadimage=" \
		"${loadcmd} ${dev} ${devnum}:${partnum} ${loadaddr} ${image}\0" \
	"loadfdt=${loadcmd} ${dev} ${devnum}:${partnum} ${fdt_addr} ${fdt_file}\0" \
	"tryboot=" \
		"if run loadbootscript; then " \
			"run bootscript; " \
		"else " \
			"if run loadimage; then " \
				"run doboot; " \
			"fi; " \
		"fi;\0" \
	"doboot=echo Booting from ${dev}:${devnum}:${partnum} ...; " \
		"run setargs; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if run loadfdt; then " \
				"bootm ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootm; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootm; " \
		"fi;\0" \
	"netargs=setenv bootargs console=${console},${baudrate} " \
		"root=/dev/nfs " \
		"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
	"netboot=echo Booting from net ...; " \
		"run netargs; " \
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"${get_cmd} ${image}; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
				"bootm ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootm; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootm; " \
		"fi;\0" \

#define CONFIG_BOOTCOMMAND \
	"usb start; " \
	"setenv dev usb; " \
	"setenv devnum 0; " \
	"setenv rootdev sda${rfspart}; " \
	"run tryboot; " \
	\
	"setenv dev mmc; " \
	"setenv rootdev mmcblk0p${rfspart}; " \
	\
	"setenv devnum ${sddev}; " \
	"if mmc dev ${devnum}; then " \
		"run tryboot; " \
	"fi; " \
	\
	"setenv devnum ${emmcdev}; " \
	"setenv rootdev mmcblk${emmcdev}p${rfspart}; " \
	"if mmc dev ${devnum}; then " \
		"run tryboot; " \
	"fi; " \
	\
	"bmode usb; " \

#define CONFIG_ARP_TIMEOUT     200UL

/* Miscellaneous configurable options */
#define CONFIG_SYS_LONGHELP
#define CONFIG_AUTO_COMPLETE

/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE

#define CONFIG_SYS_MEMTEST_START       0x10000000
#define CONFIG_SYS_MEMTEST_END         0x10010000
#define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000

#define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR

#define CONFIG_CMDLINE_EDITING
#define CONFIG_STACKSIZE               (128 * 1024)

/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS           1
#define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR

#define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/* FLASH and environment organization */
#define CONFIG_SYS_NO_FLASH

#define CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_ENV_SIZE                 (8 * 1024)
#define CONFIG_ENV_OFFSET               (768 * 1024)
#define CONFIG_ENV_SECT_SIZE            (64 * 1024)
#define CONFIG_ENV_SPI_BUS              CONFIG_SF_DEFAULT_BUS
#define CONFIG_ENV_SPI_CS               CONFIG_SF_DEFAULT_CS
#define CONFIG_ENV_SPI_MODE             CONFIG_SF_DEFAULT_MODE
#define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED

#ifndef CONFIG_SYS_DCACHE_OFF
#endif

#define CONFIG_SYS_FSL_USDHC_NUM        3

/* Framebuffer */
#define CONFIG_VIDEO_IPUV3
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_SPLASH_SCREEN
#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_BMP_LOGO
#define CONFIG_IPUV3_CLK                260000000
#define CONFIG_IMX_HDMI
#define CONFIG_IMX_VIDEO_SKIP

#define CONFIG_PWM_IMX
#define CONFIG_IMX6_PWM_PER_CLK         66000000

#undef CONFIG_CMD_PCI
#ifdef CONFIG_CMD_PCI
#define CONFIG_PCI_SCAN_SHOW
#define CONFIG_PCIE_IMX
#define CONFIG_PCIE_IMX_PERST_GPIO      IMX_GPIO_NR(7, 12)
#define CONFIG_PCIE_IMX_POWER_GPIO      IMX_GPIO_NR(1, 5)
#endif

/* I2C Configs */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_SPEED            100000
#define CONFIG_SYS_I2C_MXC_I2C1
#define CONFIG_SYS_I2C_MXC_I2C2
#define CONFIG_SYS_I2C_MXC_I2C3

#endif	/* __ADVANTECH_DMSBA16_CONFIG_H */
Commit	Line	Data
ff383220 AB	1	/*
	2	* Copyright (C) 2016 Timesys Corporation
	3	* Copyright (C) 2016 Advantech Corporation
	4	* Copyright (C) 2012 Freescale Semiconductor, Inc.
	5	*
	6	* SPDX-License-Identifier: GPL-2.0+
	7	*/
	8
	9	#ifndef __ADVANTECH_DMSBA16_CONFIG_H
	10	#define __ADVANTECH_DMSBA16_CONFIG_H
	11
	12	#include <asm/arch/imx-regs.h>
	13	#include <asm/imx-common/gpio.h>
	14
	15	#define CONFIG_BOARD_NAME "Advantech DMS-BA16"
ff383220 AB	16
ff383220 AB	17	#define CONFIG_MXC_UART_BASE UART4_BASE
12ca05a3	18	#define CONSOLE_DEV "ttymxc3"
ff383220 AB	19	#define CONFIG_EXTRA_BOOTARGS "panic=10"
	20
	21	#define CONFIG_BOOT_DIR ""
	22	#define CONFIG_LOADCMD "fatload"
	23	#define CONFIG_RFSPART "2"
	24
	25	#define CONFIG_SUPPORT_EMMC_BOOT
	26
	27	#include "mx6_common.h"
	28	#include <linux/sizes.h>
	29
ff383220 AB	30	#define CONFIG_CMDLINE_TAG
	31	#define CONFIG_SETUP_MEMORY_TAGS
	32	#define CONFIG_INITRD_TAG
	33	#define CONFIG_REVISION_TAG
	34	#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
	35
	36	#define CONFIG_BOARD_EARLY_INIT_F
ff383220 AB	37
	38	#define CONFIG_MXC_GPIO
	39	#define CONFIG_MXC_UART
	40
	41	#define CONFIG_CMD_FUSE
	42	#define CONFIG_MXC_OCOTP
	43
	44	/* SATA Configs */
	45	#define CONFIG_CMD_SATA
	46	#define CONFIG_DWC_AHSATA
	47	#define CONFIG_SYS_SATA_MAX_DEVICE 1
	48	#define CONFIG_DWC_AHSATA_PORT_ID 0
	49	#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
	50	#define CONFIG_LBA48
	51	#define CONFIG_LIBATA
	52
	53	/* MMC Configs */
	54	#define CONFIG_FSL_ESDHC
	55	#define CONFIG_FSL_USDHC
	56	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
ff383220 AB	57	#define CONFIG_GENERIC_MMC
	58	#define CONFIG_BOUNCE_BUFFER
	59	#define CONFIG_DOS_PARTITION
	60
	61	/* USB Configs */
	62	#define CONFIG_USB_EHCI
	63	#define CONFIG_USB_EHCI_MX6
	64	#define CONFIG_USB_STORAGE
	65	#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
	66	#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
	67	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
	68	#define CONFIG_MXC_USB_FLAGS 0
ff383220 AB	69	#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
	70
	71	#define CONFIG_USBD_HS
	72	#define CONFIG_USB_FUNCTION_MASS_STORAGE
	73	#define CONFIG_USB_GADGET_VBUS_DRAW 2
	74
	75	/* Networking Configs */
	76	#define CONFIG_FEC_MXC
	77	#define CONFIG_MII
	78	#define IMX_FEC_BASE ENET_BASE_ADDR
	79	#define CONFIG_FEC_XCV_TYPE RGMII
	80	#define CONFIG_ETHPRIME "FEC"
	81	#define CONFIG_FEC_MXC_PHYADDR 4
	82	#define CONFIG_PHYLIB
	83	#define CONFIG_PHY_ATHEROS
	84
	85	/* Serial Flash */
	86	#ifdef CONFIG_CMD_SF
	87	#define CONFIG_MXC_SPI
	88	#define CONFIG_SF_DEFAULT_BUS 0
	89	#define CONFIG_SF_DEFAULT_CS 0
	90	#define CONFIG_SF_DEFAULT_SPEED 20000000
	91	#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
	92	#endif
	93
	94	/* allow to overwrite serial and ethaddr */
	95	#define CONFIG_ENV_OVERWRITE
	96	#define CONFIG_CONS_INDEX 1
	97	#define CONFIG_BAUDRATE 115200
	98
	99	/* Command definition */
	100	#define CONFIG_CMD_BMODE
	101
	102	#define CONFIG_LOADADDR 0x12000000
	103	#define CONFIG_SYS_TEXT_BASE 0x17800000
	104
	105	#define CONFIG_EXTRA_ENV_SETTINGS \
	106	"script=boot.scr\0" \
	107	"image=" CONFIG_BOOT_DIR "/uImage\0" \
	108	"uboot=u-boot.imx\0" \
	109	"fdt_file=" CONFIG_BOOT_DIR "/" CONFIG_DEFAULT_FDT_FILE "\0" \
	110	"fdt_addr=0x18000000\0" \
	111	"boot_fdt=yes\0" \
	112	"ip_dyn=yes\0" \
12ca05a3	113	"console=" CONSOLE_DEV "\0" \
ff383220 AB	114	"fdt_high=0xffffffff\0" \
	115	"initrd_high=0xffffffff\0" \
	116	"sddev=0\0" \
	117	"emmcdev=1\0" \
	118	"partnum=1\0" \
	119	"loadcmd=" CONFIG_LOADCMD "\0" \
	120	"rfspart=" CONFIG_RFSPART "\0" \
	121	"update_sd_firmware=" \
	122	"if test ${ip_dyn} = yes; then " \
	123	"setenv get_cmd dhcp; " \
	124	"else " \
	125	"setenv get_cmd tftp; " \
	126	"fi; " \
	127	"if mmc dev ${mmcdev}; then " \
	128	"if ${get_cmd} ${update_sd_firmware_filename}; then " \
	129	"setexpr fw_sz ${filesize} / 0x200; " \
	130	"setexpr fw_sz ${fw_sz} + 1; " \
	131	"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
	132	"fi; " \
	133	"fi\0" \
	134	"update_sf_uboot=" \
	135	"if tftp $loadaddr $uboot; then " \
	136	"sf probe; " \
	137	"sf erase 0 0xC0000; " \
	138	"sf write $loadaddr 0x400 $filesize; " \
	139	"echo 'U-Boot upgraded. Please reset'; " \
	140	"fi\0" \
	141	"setargs=setenv bootargs console=${console},${baudrate} " \
	142	"root=/dev/${rootdev} rw rootwait " CONFIG_EXTRA_BOOTARGS "\0" \
	143	"loadbootscript=" \
	144	"${loadcmd} ${dev} ${devnum}:${partnum} ${loadaddr} ${script};\0" \
	145	"bootscript=echo Running bootscript from ${dev}:${devnum}:${partnum};" \
	146	" source\0" \
	147	"loadimage=" \
	148	"${loadcmd} ${dev} ${devnum}:${partnum} ${loadaddr} ${image}\0" \
	149	"loadfdt=${loadcmd} ${dev} ${devnum}:${partnum} ${fdt_addr} ${fdt_file}\0" \
	150	"tryboot=" \
	151	"if run loadbootscript; then " \
	152	"run bootscript; " \
	153	"else " \
	154	"if run loadimage; then " \
	155	"run doboot; " \
	156	"fi; " \
	157	"fi;\0" \
	158	"doboot=echo Booting from ${dev}:${devnum}:${partnum} ...; " \
	159	"run setargs; " \
	160	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	161	"if run loadfdt; then " \
	162	"bootm ${loadaddr} - ${fdt_addr}; " \
	163	"else " \
	164	"if test ${boot_fdt} = try; then " \
	165	"bootm; " \
	166	"else " \
	167	"echo WARN: Cannot load the DT; " \
	168	"fi; " \
	169	"fi; " \
	170	"else " \
	171	"bootm; " \
	172	"fi;\0" \
	173	"netargs=setenv bootargs console=${console},${baudrate} " \
	174	"root=/dev/nfs " \
	175	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
	176	"netboot=echo Booting from net ...; " \
	177	"run netargs; " \
178	"if test ${ip_dyn} = yes; then " \
179	"setenv get_cmd dhcp; " \
180	"else " \
181	"setenv get_cmd tftp; " \
182	"fi; " \
183	"${get_cmd} ${image}; " \
184	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
185	"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
186	"bootm ${loadaddr} - ${fdt_addr}; " \
187	"else " \
188	"if test ${boot_fdt} = try; then " \
189	"bootm; " \
190	"else " \
191	"echo WARN: Cannot load the DT; " \
192	"fi; " \
193	"fi; " \
194	"else " \
195	"bootm; " \
196	"fi;\0" \
197
198	#define CONFIG_BOOTCOMMAND \
199	"usb start; " \
200	"setenv dev usb; " \
201	"setenv devnum 0; " \
202	"setenv rootdev sda${rfspart}; " \
203	"run tryboot; " \
204	\
205	"setenv dev mmc; " \
206	"setenv rootdev mmcblk0p${rfspart}; " \
207	\
208	"setenv devnum ${sddev}; " \
209	"if mmc dev ${devnum}; then " \
210	"run tryboot; " \
211	"fi; " \
212	\
213	"setenv devnum ${emmcdev}; " \
214	"setenv rootdev mmcblk${emmcdev}p${rfspart}; " \
215	"if mmc dev ${devnum}; then " \
216	"run tryboot; " \
217	"fi; " \
218	\
219	"bmode usb; " \
220
221	#define CONFIG_ARP_TIMEOUT 200UL
222
223	/* Miscellaneous configurable options */
224	#define CONFIG_SYS_LONGHELP
225	#define CONFIG_AUTO_COMPLETE
226
227	/* Print Buffer Size */
228	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
229	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
230
231	#define CONFIG_SYS_MEMTEST_START 0x10000000
232	#define CONFIG_SYS_MEMTEST_END 0x10010000
233	#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
234
235	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
236
237	#define CONFIG_CMDLINE_EDITING
238	#define CONFIG_STACKSIZE (128 * 1024)
239
240	/* Physical Memory Map */
241	#define CONFIG_NR_DRAM_BANKS 1
242	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
243
244	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
245	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
246	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
247
248	#define CONFIG_SYS_INIT_SP_OFFSET \
249	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
250	#define CONFIG_SYS_INIT_SP_ADDR \
251	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
252
253	/* FLASH and environment organization */
254	#define CONFIG_SYS_NO_FLASH
255
256	#define CONFIG_ENV_IS_IN_SPI_FLASH
257	#define CONFIG_ENV_SIZE (8 * 1024)
258	#define CONFIG_ENV_OFFSET (768 * 1024)
259	#define CONFIG_ENV_SECT_SIZE (64 * 1024)
260	#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
261	#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
262	#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
263	#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
264
265	#ifndef CONFIG_SYS_DCACHE_OFF
266	#endif
267
268	#define CONFIG_SYS_FSL_USDHC_NUM 3
269
270	/* Framebuffer */
ff383220	271	#define CONFIG_VIDEO_IPUV3
ff383220 AB	272	#define CONFIG_VIDEO_BMP_RLE8
	273	#define CONFIG_SPLASH_SCREEN
	274	#define CONFIG_SPLASH_SCREEN_ALIGN
	275	#define CONFIG_BMP_16BPP
	276	#define CONFIG_VIDEO_LOGO
	277	#define CONFIG_VIDEO_BMP_LOGO
	278	#define CONFIG_IPUV3_CLK 260000000
	279	#define CONFIG_IMX_HDMI
	280	#define CONFIG_IMX_VIDEO_SKIP
	281
	282	#define CONFIG_PWM_IMX
	283	#define CONFIG_IMX6_PWM_PER_CLK 66000000
	284
	285	#undef CONFIG_CMD_PCI
	286	#ifdef CONFIG_CMD_PCI
ff383220 AB	287	#define CONFIG_PCI_SCAN_SHOW
	288	#define CONFIG_PCIE_IMX
	289	#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(7, 12)
	290	#define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(1, 5)
	291	#endif
	292
	293	/* I2C Configs */
	294	#define CONFIG_SYS_I2C
	295	#define CONFIG_SYS_I2C_MXC
	296	#define CONFIG_SYS_I2C_SPEED 100000
	297	#define CONFIG_SYS_I2C_MXC_I2C1
	298	#define CONFIG_SYS_I2C_MXC_I2C2
	299	#define CONFIG_SYS_I2C_MXC_I2C3
	300
	301	#endif /* __ADVANTECH_DMSBA16_CONFIG_H */