]>
Commit | Line | Data |
---|---|---|
915162da S |
1 | /* |
2 | * am3517_crane.h - Default configuration for AM3517 CraneBoard. | |
3 | * | |
4 | * Author: Srinath.R <srinath@mistralsolutions.com> | |
5 | * | |
6 | * Based on include/configs/am3517evm.h | |
7 | * | |
8 | * Copyright (C) 2011 Mistral Solutions pvt Ltd | |
9 | * | |
1a459660 | 10 | * SPDX-License-Identifier: GPL-2.0+ |
915162da S |
11 | */ |
12 | ||
13 | #ifndef __CONFIG_H | |
14 | #define __CONFIG_H | |
15 | ||
16 | /* | |
17 | * High Level Configuration Options | |
18 | */ | |
915162da | 19 | #define CONFIG_OMAP 1 /* in a TI OMAP core */ |
915162da | 20 | #define CONFIG_OMAP3_AM3517CRANE 1 /* working with CRANEBOARD */ |
806d2792 | 21 | #define CONFIG_OMAP_COMMON |
c6f90e14 NM |
22 | /* Common ARM Erratas */ |
23 | #define CONFIG_ARM_ERRATA_454179 | |
24 | #define CONFIG_ARM_ERRATA_430973 | |
25 | #define CONFIG_ARM_ERRATA_621766 | |
915162da S |
26 | |
27 | #define CONFIG_EMIF4 /* The chip has EMIF4 controller */ | |
28 | ||
29 | #include <asm/arch/cpu.h> /* get chip and board defs */ | |
987ec585 | 30 | #include <asm/arch/omap.h> |
915162da S |
31 | |
32 | /* | |
33 | * Display CPU and Board information | |
34 | */ | |
35 | #define CONFIG_DISPLAY_CPUINFO 1 | |
36 | #define CONFIG_DISPLAY_BOARDINFO 1 | |
37 | ||
38 | /* Clock Defines */ | |
39 | #define V_OSCK 26000000 /* Clock output from T2 */ | |
40 | #define V_SCLK (V_OSCK >> 1) | |
41 | ||
915162da S |
42 | #define CONFIG_MISC_INIT_R |
43 | ||
44 | #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ | |
45 | #define CONFIG_SETUP_MEMORY_TAGS 1 | |
46 | #define CONFIG_INITRD_TAG 1 | |
47 | #define CONFIG_REVISION_TAG 1 | |
48 | ||
49 | /* | |
50 | * Size of malloc() pool | |
51 | */ | |
52 | #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB sector */ | |
53 | #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) | |
54 | /* initial data */ | |
55 | /* | |
56 | * DDR related | |
57 | */ | |
915162da S |
58 | #define CONFIG_SYS_CS0_SIZE (256 * 1024 * 1024) |
59 | ||
60 | /* | |
61 | * Hardware drivers | |
62 | */ | |
63 | ||
64 | /* | |
65 | * NS16550 Configuration | |
66 | */ | |
67 | #define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ | |
68 | ||
915162da S |
69 | #define CONFIG_SYS_NS16550_SERIAL |
70 | #define CONFIG_SYS_NS16550_REG_SIZE (-4) | |
71 | #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK | |
72 | ||
73 | /* | |
74 | * select serial console configuration | |
75 | */ | |
76 | #define CONFIG_CONS_INDEX 3 | |
77 | #define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 | |
78 | #define CONFIG_SERIAL3 3 /* UART3 on CRANEBOARD */ | |
79 | ||
80 | /* allow to overwrite serial and ethaddr */ | |
81 | #define CONFIG_ENV_OVERWRITE | |
82 | #define CONFIG_BAUDRATE 115200 | |
83 | #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ | |
84 | 115200} | |
a5a8821c | 85 | #define CONFIG_GENERIC_MMC 1 |
915162da | 86 | #define CONFIG_MMC 1 |
a5a8821c | 87 | #define CONFIG_OMAP_HSMMC 1 |
915162da S |
88 | #define CONFIG_DOS_PARTITION 1 |
89 | ||
90 | /* | |
91 | * USB configuration | |
95de1e2f PK |
92 | * Enable CONFIG_USB_MUSB_HCD for Host functionalities MSC, keyboard |
93 | * Enable CONFIG_USB_MUSB_UDC for Device functionalities. | |
915162da S |
94 | */ |
95 | #define CONFIG_USB_AM35X 1 | |
95de1e2f | 96 | #define CONFIG_USB_MUSB_HCD 1 |
915162da S |
97 | |
98 | #ifdef CONFIG_USB_AM35X | |
99 | ||
95de1e2f | 100 | #ifdef CONFIG_USB_MUSB_HCD |
915162da S |
101 | |
102 | #define CONFIG_USB_STORAGE | |
103 | #define CONGIG_CMD_STORAGE | |
915162da S |
104 | |
105 | #ifdef CONFIG_USB_KEYBOARD | |
106 | #define CONFIG_SYS_USB_EVENT_POLL | |
107 | #define CONFIG_PREBOOT "usb start" | |
108 | #endif /* CONFIG_USB_KEYBOARD */ | |
109 | ||
95de1e2f | 110 | #endif /* CONFIG_USB_MUSB_HCD */ |
915162da | 111 | |
95de1e2f | 112 | #ifdef CONFIG_USB_MUSB_UDC |
915162da S |
113 | /* USB device configuration */ |
114 | #define CONFIG_USB_DEVICE 1 | |
115 | #define CONFIG_USB_TTY 1 | |
116 | #define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 | |
117 | /* Change these to suit your needs */ | |
118 | #define CONFIG_USBD_VENDORID 0x0451 | |
119 | #define CONFIG_USBD_PRODUCTID 0x5678 | |
120 | #define CONFIG_USBD_MANUFACTURER "Texas Instruments" | |
121 | #define CONFIG_USBD_PRODUCT_NAME "AM3517CRANE" | |
95de1e2f | 122 | #endif /* CONFIG_USB_MUSB_UDC */ |
915162da S |
123 | |
124 | #endif /* CONFIG_USB_AM35X */ | |
125 | ||
126 | /* commands to include */ | |
915162da S |
127 | #define CONFIG_CMD_JFFS2 /* JFFS2 Support */ |
128 | ||
915162da | 129 | #define CONFIG_CMD_NAND /* NAND support */ |
915162da | 130 | |
915162da | 131 | #define CONFIG_SYS_NO_FLASH |
6789e84e HS |
132 | #define CONFIG_SYS_I2C |
133 | #define CONFIG_SYS_OMAP24_I2C_SPEED 100000 | |
134 | #define CONFIG_SYS_OMAP24_I2C_SLAVE 1 | |
135 | #define CONFIG_SYS_I2C_OMAP34XX | |
915162da | 136 | |
915162da S |
137 | /* |
138 | * Board NAND Info. | |
139 | */ | |
140 | #define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ | |
141 | /* to access nand */ | |
142 | #define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ | |
143 | /* to access */ | |
144 | /* nand at CS0 */ | |
145 | ||
146 | #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */ | |
147 | /* NAND devices */ | |
915162da S |
148 | |
149 | #define CONFIG_JFFS2_NAND | |
150 | /* nand device jffs2 lives on */ | |
151 | #define CONFIG_JFFS2_DEV "nand0" | |
152 | /* start of jffs2 partition */ | |
153 | #define CONFIG_JFFS2_PART_OFFSET 0x680000 | |
154 | #define CONFIG_JFFS2_PART_SIZE 0xf980000 /* sz of jffs2 part */ | |
155 | ||
156 | /* Environment information */ | |
915162da | 157 | |
b3f44c21 | 158 | #define CONFIG_BOOTFILE "uImage" |
915162da S |
159 | |
160 | #define CONFIG_EXTRA_ENV_SETTINGS \ | |
161 | "loadaddr=0x82000000\0" \ | |
162 | "console=ttyS2,115200n8\0" \ | |
a5a8821c | 163 | "mmcdev=0\0" \ |
915162da S |
164 | "mmcargs=setenv bootargs console=${console} " \ |
165 | "root=/dev/mmcblk0p2 rw " \ | |
166 | "rootfstype=ext3 rootwait\0" \ | |
167 | "nandargs=setenv bootargs console=${console} " \ | |
168 | "root=/dev/mtdblock4 rw " \ | |
169 | "rootfstype=jffs2\0" \ | |
a5a8821c | 170 | "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ |
915162da S |
171 | "bootscript=echo Running bootscript from mmc ...; " \ |
172 | "source ${loadaddr}\0" \ | |
a5a8821c | 173 | "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ |
915162da S |
174 | "mmcboot=echo Booting from mmc ...; " \ |
175 | "run mmcargs; " \ | |
176 | "bootm ${loadaddr}\0" \ | |
177 | "nandboot=echo Booting from nand ...; " \ | |
178 | "run nandargs; " \ | |
179 | "nand read ${loadaddr} 280000 400000; " \ | |
180 | "bootm ${loadaddr}\0" \ | |
181 | ||
182 | #define CONFIG_BOOTCOMMAND \ | |
66968110 | 183 | "mmc dev ${mmcdev}; if mmc rescan; then " \ |
915162da S |
184 | "if run loadbootscript; then " \ |
185 | "run bootscript; " \ | |
186 | "else " \ | |
187 | "if run loaduimage; then " \ | |
188 | "run mmcboot; " \ | |
189 | "else run nandboot; " \ | |
190 | "fi; " \ | |
191 | "fi; " \ | |
192 | "else run nandboot; fi" | |
193 | ||
194 | #define CONFIG_AUTO_COMPLETE 1 | |
195 | /* | |
196 | * Miscellaneous configurable options | |
197 | */ | |
915162da | 198 | #define CONFIG_SYS_LONGHELP /* undef to save memory */ |
915162da S |
199 | #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ |
200 | /* Print Buffer Size */ | |
201 | #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ | |
202 | sizeof(CONFIG_SYS_PROMPT) + 16) | |
203 | #define CONFIG_SYS_MAXARGS 32 /* max number of command */ | |
204 | /* args */ | |
205 | /* Boot Argument Buffer Size */ | |
206 | #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) | |
207 | /* memtest works on */ | |
208 | #define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) | |
209 | #define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \ | |
210 | 0x01F00000) /* 31MB */ | |
211 | ||
212 | #define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load */ | |
213 | /* address */ | |
214 | ||
215 | /* | |
216 | * AM3517 has 12 GP timers, they can be driven by the system clock | |
217 | * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). | |
218 | * This rate is divided by a local divisor. | |
219 | */ | |
220 | #define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2 | |
221 | #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ | |
915162da | 222 | |
915162da S |
223 | /*----------------------------------------------------------------------- |
224 | * Physical Memory Map | |
225 | */ | |
226 | #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ | |
227 | #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 | |
915162da S |
228 | #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 |
229 | ||
915162da S |
230 | /*----------------------------------------------------------------------- |
231 | * FLASH and environment organization | |
232 | */ | |
233 | ||
234 | /* **** PISMO SUPPORT *** */ | |
915162da S |
235 | #define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors */ |
236 | /* on one chip */ | |
237 | #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */ | |
238 | #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ | |
239 | ||
222a3113 | 240 | #define CONFIG_SYS_FLASH_BASE NAND_BASE |
915162da S |
241 | |
242 | /* Monitor at start of flash */ | |
243 | #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE | |
244 | ||
245 | #define CONFIG_NAND_OMAP_GPMC | |
915162da S |
246 | #define CONFIG_ENV_IS_IN_NAND 1 |
247 | #define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ | |
248 | ||
6cbec7b3 LC |
249 | #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB sector */ |
250 | #define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET | |
251 | #define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET | |
915162da S |
252 | |
253 | /*----------------------------------------------------------------------- | |
254 | * CFI FLASH driver setup | |
255 | */ | |
256 | /* timeout values are in ticks */ | |
257 | #define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ) | |
258 | #define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ) | |
259 | ||
260 | /* Flash banks JFFS2 should use */ | |
261 | #define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \ | |
262 | CONFIG_SYS_MAX_NAND_DEVICE) | |
263 | #define CONFIG_SYS_JFFS2_MEM_NAND | |
264 | /* use flash_info[2] */ | |
265 | #define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS | |
266 | #define CONFIG_SYS_JFFS2_NUM_BANKS 1 | |
267 | ||
915162da S |
268 | #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 |
269 | #define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 | |
270 | #define CONFIG_SYS_INIT_RAM_SIZE 0x800 | |
271 | #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ | |
272 | CONFIG_SYS_INIT_RAM_SIZE - \ | |
273 | GENERATED_GBL_DATA_SIZE) | |
d067cc46 TR |
274 | |
275 | /* Defines for SPL */ | |
47f7bcae | 276 | #define CONFIG_SPL_FRAMEWORK |
d7cb93b2 | 277 | #define CONFIG_SPL_BOARD_INIT |
d067cc46 TR |
278 | #define CONFIG_SPL_NAND_SIMPLE |
279 | #define CONFIG_SPL_TEXT_BASE 0x40200800 | |
e0820ccc | 280 | #define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */ |
d067cc46 TR |
281 | |
282 | #define CONFIG_SPL_BSS_START_ADDR 0x80000000 | |
283 | #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ | |
284 | ||
285 | #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ | |
286 | #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ | |
e2ccdf89 | 287 | #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 |
205b4f33 | 288 | #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" |
d067cc46 TR |
289 | |
290 | #define CONFIG_SPL_LIBCOMMON_SUPPORT | |
291 | #define CONFIG_SPL_LIBDISK_SUPPORT | |
292 | #define CONFIG_SPL_I2C_SUPPORT | |
293 | #define CONFIG_SPL_LIBGENERIC_SUPPORT | |
294 | #define CONFIG_SPL_MMC_SUPPORT | |
295 | #define CONFIG_SPL_FAT_SUPPORT | |
296 | #define CONFIG_SPL_SERIAL_SUPPORT | |
297 | #define CONFIG_SPL_NAND_SUPPORT | |
6f2f01b9 SW |
298 | #define CONFIG_SPL_NAND_BASE |
299 | #define CONFIG_SPL_NAND_DRIVERS | |
300 | #define CONFIG_SPL_NAND_ECC | |
d067cc46 TR |
301 | #define CONFIG_SPL_POWER_SUPPORT |
302 | #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" | |
303 | ||
304 | /* NAND boot config */ | |
55f1b39f | 305 | #define CONFIG_SYS_NAND_BUSWIDTH_16BIT |
d067cc46 TR |
306 | #define CONFIG_SYS_NAND_5_ADDR_CYCLE |
307 | #define CONFIG_SYS_NAND_PAGE_COUNT 64 | |
308 | #define CONFIG_SYS_NAND_PAGE_SIZE 2048 | |
309 | #define CONFIG_SYS_NAND_OOBSIZE 64 | |
310 | #define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) | |
311 | #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS | |
312 | #define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\ | |
313 | 10, 11, 12, 13} | |
314 | #define CONFIG_SYS_NAND_ECCSIZE 512 | |
315 | #define CONFIG_SYS_NAND_ECCBYTES 3 | |
3f719069 | 316 | #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW |
d067cc46 TR |
317 | #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE |
318 | #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 | |
319 | ||
320 | /* | |
321 | * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM | |
322 | * 64 bytes before this address should be set aside for u-boot.img's | |
323 | * header. That is 0x800FFFC0--0x80100000 should not be used for any | |
324 | * other needs. | |
325 | */ | |
326 | #define CONFIG_SYS_TEXT_BASE 0x80100000 | |
327 | #define CONFIG_SYS_SPL_MALLOC_START 0x80208000 | |
328 | #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 | |
329 | ||
915162da | 330 | #endif /* __CONFIG_H */ |