[people/ms/u-boot.git] / include / configs / am57xx_evm.h

/*
 * (C) Copyright 2014
 * Texas Instruments Incorporated.
 * Felipe Balbi <balbi@ti.com>
 *
 * Configuration settings for the TI Beagle x15 board.
 * See ti_omap5_common.h for omap5 common settings.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_AM57XX_EVM_H
#define __CONFIG_AM57XX_EVM_H

#define CONFIG_AM57XX

#ifdef CONFIG_SPL_BUILD
#define CONFIG_IODELAY_RECALIBRATION
#endif

#define CONFIG_BOARD_EARLY_INIT_F

#define CONFIG_NR_DRAM_BANKS		2

#define CONFIG_ENV_SIZE			(64 << 10)
#define CONFIG_ENV_IS_IN_FAT
#define FAT_ENV_INTERFACE		"mmc"
#define FAT_ENV_DEVICE_AND_PART		"0:1"
#define FAT_ENV_FILE			"uboot.env"

#define CONSOLEDEV			"ttyO2"
#define CONFIG_SYS_NS16550_COM1		UART1_BASE	/* Base EVM has UART0 */
#define CONFIG_SYS_NS16550_COM2		UART2_BASE	/* UART2 */
#define CONFIG_SYS_NS16550_COM3		UART3_BASE	/* UART3 */
#define CONFIG_BAUDRATE			115200

#define CONFIG_SYS_OMAP_ABE_SYSCK

/* Define the default GPT table for eMMC */
#define PARTS_DEFAULT \
	/* Linux partitions */ \
	"uuid_disk=${uuid_gpt_disk};" \
	"name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \
	/* Android partitions */ \
	"partitions_android=" \
	"uuid_disk=${uuid_gpt_disk};" \
	"name=xloader,start=128K,size=256K,uuid=${uuid_gpt_xloader};" \
	"name=bootloader,size=768K,uuid=${uuid_gpt_bootloader};" \
	"name=environment,size=128K,uuid=${uuid_gpt_environment};" \
	"name=misc,size=128K,uuid=${uuid_gpt_misc};" \
	"name=reserved,size=256K,uuid=${uuid_gpt_reserved};" \
	"name=efs,size=16M,uuid=${uuid_gpt_efs};" \
	"name=crypto,size=16K,uuid=${uuid_gpt_crypto};" \
	"name=recovery,size=10M,uuid=${uuid_gpt_recovery};" \
	"name=boot,size=10M,uuid=${uuid_gpt_boot};" \
	"name=system,size=768M,uuid=${uuid_gpt_system};" \
	"name=cache,size=256M,uuid=${uuid_gpt_cache};" \
	"name=ipu1,size=1M,uuid=${uuid_gpt_ipu1};" \
	"name=ipu2,size=1M,uuid=${uuid_gpt_ipu2};" \
	"name=userdata,size=-,uuid=${uuid_gpt_userdata}"

#include <configs/ti_omap5_common.h>

/* Enhance our eMMC support / experience. */
#define CONFIG_CMD_GPT
#define CONFIG_EFI_PARTITION
#define CONFIG_RANDOM_UUID

/* CPSW Ethernet */
#define CONFIG_BOOTP_DNS		/* Configurable parts of CMD_DHCP */
#define CONFIG_BOOTP_DNS2
#define CONFIG_BOOTP_SEND_HOSTNAME
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_SUBNETMASK
#define CONFIG_NET_RETRY_COUNT		10
#define CONFIG_DRIVER_TI_CPSW		/* Driver for IP block */
#define CONFIG_MII			/* Required in net/eth.c */
#define CONFIG_PHY_GIGE			/* per-board part of CPSW */
#define CONFIG_PHYLIB
#define PHY_ANEG_TIMEOUT	8000	/* PHY needs longer aneg time at 1G */

#define CONFIG_SUPPORT_EMMC_BOOT

/* USB xHCI HOST */
#define CONFIG_USB_XHCI_OMAP
#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2

#define CONFIG_OMAP_USB_PHY
#define CONFIG_OMAP_USB3PHY1_HOST

/* SATA */
#define CONFIG_BOARD_LATE_INIT
#define CONFIG_SCSI
#define CONFIG_LIBATA
#define CONFIG_SCSI_AHCI
#define CONFIG_SCSI_AHCI_PLAT
#define CONFIG_SYS_SCSI_MAX_SCSI_ID	1
#define CONFIG_SYS_SCSI_MAX_LUN		1
#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
						CONFIG_SYS_SCSI_MAX_LUN)

/* EEPROM */
#define CONFIG_EEPROM_CHIP_ADDRESS 0x50
#define CONFIG_EEPROM_BUS_ADDRESS 0

/*
 * Default to using SPI for environment, etc.
 * 0x000000 - 0x040000 : QSPI.SPL (256KiB)
 * 0x040000 - 0x140000 : QSPI.u-boot (1MiB)
 * 0x140000 - 0x1C0000 : QSPI.u-boot-spl-os (512KiB)
 * 0x1C0000 - 0x1D0000 : QSPI.u-boot-env (64KiB)
 * 0x1D0000 - 0x1E0000 : QSPI.u-boot-env.backup1 (64KiB)
 * 0x1E0000 - 0x9E0000 : QSPI.kernel (8MiB)
 * 0x9E0000 - 0x2000000 : USERLAND
 */
#define CONFIG_SYS_SPI_KERNEL_OFFS      0x1E0000
#define CONFIG_SYS_SPI_ARGS_OFFS        0x140000
#define CONFIG_SYS_SPI_ARGS_SIZE        0x80000

#ifdef CONFIG_SPL_BUILD
#undef CONFIG_DM_SPI
#undef CONFIG_DM_SPI_FLASH
#endif

/* SPI SPL */
#define CONFIG_TI_EDMA3
#define CONFIG_SPL_SPI_LOAD
#define CONFIG_SYS_SPI_U_BOOT_OFFS     0x40000

/* SPI */
#undef	CONFIG_OMAP3_SPI
#define CONFIG_TI_SPI_MMAP
#define CONFIG_SF_DEFAULT_SPEED                76800000
#define CONFIG_SF_DEFAULT_MODE                 SPI_MODE_0
#define CONFIG_QSPI_QUAD_SUPPORT

#endif /* __CONFIG_AM57XX_EVM_H */
Commit	Line	Data
1e4ad74b FB	1	/*
	2	* (C) Copyright 2014
	3	* Texas Instruments Incorporated.
	4	* Felipe Balbi <balbi@ti.com>
	5	*
	6	* Configuration settings for the TI Beagle x15 board.
	7	* See ti_omap5_common.h for omap5 common settings.
	8	*
	9	* SPDX-License-Identifier: GPL-2.0+
	10	*/
	11
74cc8b09 KS	12	#ifndef __CONFIG_AM57XX_EVM_H
74cc8b09 KS	13	#define __CONFIG_AM57XX_EVM_H
1e4ad74b FB	14
	15	#define CONFIG_AM57XX
	16
f91e0c4c LV	17	#ifdef CONFIG_SPL_BUILD
	18	#define CONFIG_IODELAY_RECALIBRATION
	19	#endif
	20
334bbb38 LV	21	#define CONFIG_BOARD_EARLY_INIT_F
334bbb38 LV	22
1e4ad74b FB	23	#define CONFIG_NR_DRAM_BANKS 2
	24
	25	#define CONFIG_ENV_SIZE (64 << 10)
	26	#define CONFIG_ENV_IS_IN_FAT
	27	#define FAT_ENV_INTERFACE "mmc"
	28	#define FAT_ENV_DEVICE_AND_PART "0:1"
	29	#define FAT_ENV_FILE "uboot.env"
	30
1e4ad74b FB	31	#define CONSOLEDEV "ttyO2"
	32	#define CONFIG_SYS_NS16550_COM1 UART1_BASE /* Base EVM has UART0 */
	33	#define CONFIG_SYS_NS16550_COM2 UART2_BASE /* UART2 */
	34	#define CONFIG_SYS_NS16550_COM3 UART3_BASE /* UART3 */
	35	#define CONFIG_BAUDRATE 115200
	36
	37	#define CONFIG_SYS_OMAP_ABE_SYSCK
	38
	39	/* Define the default GPT table for eMMC */
	40	#define PARTS_DEFAULT \
a42cfa4f	41	/* Linux partitions */ \
1e4ad74b	42	"uuid_disk=${uuid_gpt_disk};" \
a42cfa4f SP	43	"name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \
	44	/* Android partitions */ \
	45	"partitions_android=" \
	46	"uuid_disk=${uuid_gpt_disk};" \
	47	"name=xloader,start=128K,size=256K,uuid=${uuid_gpt_xloader};" \
	48	"name=bootloader,size=768K,uuid=${uuid_gpt_bootloader};" \
	49	"name=environment,size=128K,uuid=${uuid_gpt_environment};" \
	50	"name=misc,size=128K,uuid=${uuid_gpt_misc};" \
	51	"name=reserved,size=256K,uuid=${uuid_gpt_reserved};" \
	52	"name=efs,size=16M,uuid=${uuid_gpt_efs};" \
	53	"name=crypto,size=16K,uuid=${uuid_gpt_crypto};" \
	54	"name=recovery,size=10M,uuid=${uuid_gpt_recovery};" \
	55	"name=boot,size=10M,uuid=${uuid_gpt_boot};" \
	56	"name=system,size=768M,uuid=${uuid_gpt_system};" \
	57	"name=cache,size=256M,uuid=${uuid_gpt_cache};" \
	58	"name=ipu1,size=1M,uuid=${uuid_gpt_ipu1};" \
	59	"name=ipu2,size=1M,uuid=${uuid_gpt_ipu2};" \
	60	"name=userdata,size=-,uuid=${uuid_gpt_userdata}"
1e4ad74b FB	61
	62	#include <configs/ti_omap5_common.h>
	63
	64	/* Enhance our eMMC support / experience. */
	65	#define CONFIG_CMD_GPT
	66	#define CONFIG_EFI_PARTITION
a42cfa4f	67	#define CONFIG_RANDOM_UUID
1e4ad74b FB	68
1e4ad74b FB	69	/* CPSW Ethernet */
1e4ad74b FB	70	#define CONFIG_BOOTP_DNS /* Configurable parts of CMD_DHCP */
	71	#define CONFIG_BOOTP_DNS2
	72	#define CONFIG_BOOTP_SEND_HOSTNAME
	73	#define CONFIG_BOOTP_GATEWAY
	74	#define CONFIG_BOOTP_SUBNETMASK
	75	#define CONFIG_NET_RETRY_COUNT 10
1e4ad74b FB	76	#define CONFIG_DRIVER_TI_CPSW /* Driver for IP block */
	77	#define CONFIG_MII /* Required in net/eth.c */
	78	#define CONFIG_PHY_GIGE /* per-board part of CPSW */
	79	#define CONFIG_PHYLIB
e736570c	80	#define PHY_ANEG_TIMEOUT 8000 /* PHY needs longer aneg time at 1G */
1e4ad74b FB	81
	82	#define CONFIG_SUPPORT_EMMC_BOOT
	83
	84	/* USB xHCI HOST */
1e4ad74b	85	#define CONFIG_USB_XHCI_OMAP
1e4ad74b FB	86	#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
	87
	88	#define CONFIG_OMAP_USB_PHY
	89	#define CONFIG_OMAP_USB3PHY1_HOST
	90
	91	/* SATA */
	92	#define CONFIG_BOARD_LATE_INIT
c649e3c9	93	#define CONFIG_SCSI
1e4ad74b FB	94	#define CONFIG_LIBATA
	95	#define CONFIG_SCSI_AHCI
	96	#define CONFIG_SCSI_AHCI_PLAT
	97	#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1
	98	#define CONFIG_SYS_SCSI_MAX_LUN 1
	99	#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
	100	CONFIG_SYS_SCSI_MAX_LUN)
	101
212f96f6 KS	102	/* EEPROM */
	103	#define CONFIG_EEPROM_CHIP_ADDRESS 0x50
	104	#define CONFIG_EEPROM_BUS_ADDRESS 0
	105
08887ed4 V	106	/*
	107	* Default to using SPI for environment, etc.
	108	* 0x000000 - 0x040000 : QSPI.SPL (256KiB)
	109	* 0x040000 - 0x140000 : QSPI.u-boot (1MiB)
	110	* 0x140000 - 0x1C0000 : QSPI.u-boot-spl-os (512KiB)
	111	* 0x1C0000 - 0x1D0000 : QSPI.u-boot-env (64KiB)
	112	* 0x1D0000 - 0x1E0000 : QSPI.u-boot-env.backup1 (64KiB)
	113	* 0x1E0000 - 0x9E0000 : QSPI.kernel (8MiB)
	114	* 0x9E0000 - 0x2000000 : USERLAND
	115	*/
	116	#define CONFIG_SYS_SPI_KERNEL_OFFS 0x1E0000
	117	#define CONFIG_SYS_SPI_ARGS_OFFS 0x140000
	118	#define CONFIG_SYS_SPI_ARGS_SIZE 0x80000
	119
	120	#ifdef CONFIG_SPL_BUILD
	121	#undef CONFIG_DM_SPI
	122	#undef CONFIG_DM_SPI_FLASH
08887ed4 V	123	#endif
	124
	125	/* SPI SPL */
08887ed4 V	126	#define CONFIG_TI_EDMA3
08887ed4 V	127	#define CONFIG_SPL_SPI_LOAD
08887ed4 V	128	#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x40000
	129
	130	/* SPI */
	131	#undef CONFIG_OMAP3_SPI
	132	#define CONFIG_TI_SPI_MMAP
	133	#define CONFIG_SF_DEFAULT_SPEED 76800000
	134	#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
	135	#define CONFIG_QSPI_QUAD_SUPPORT
	136
74cc8b09	137	#endif /* __CONFIG_AM57XX_EVM_H */