[people/ms/u-boot.git] / include / configs / amcc-common.h

/*
 * (C) Copyright 2008, 2009
 * Stefan Roese, DENX Software Engineering, sr@denx.de.
 *
 * Common configuration options for all AMCC boards
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __AMCC_COMMON_H
#define __AMCC_COMMON_H

#define CONFIG_SYS_GENERIC_BOARD

#define CONFIG_SYS_SDRAM_BASE		0x00000000	/* _must_ be 0		*/
#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE	/* Start of U-Boot	*/
#define CONFIG_SYS_MONITOR_LEN		(0xFFFFFFFF - CONFIG_SYS_MONITOR_BASE + 1)
#define CONFIG_SYS_MALLOC_LEN		(1 << 20)	/* Reserved for malloc	*/

/*
 * UART
 */
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#ifndef CONFIG_DM_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE	1
#define CONFIG_SYS_NS16550_CLK		get_serial_clock()
#endif
#define CONFIG_BAUDRATE		115200
#define CONFIG_SYS_BAUDRATE_TABLE  \
    {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}

/*
 * I2C
 */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_PPC4XX
#define CONFIG_SYS_I2C_PPC4XX_CH0
#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0		0x7F

/*
 * Ethernet/EMAC/PHY
 */
#define CONFIG_PPC4xx_EMAC
#define CONFIG_MII			/* MII PHY management		*/
#define CONFIG_NETCONSOLE		/* include NetConsole support	*/
#if defined(CONFIG_440)
#define CONFIG_SYS_RX_ETH_BUFFER	32	/* number of eth rx buffers	*/
#else
#define CONFIG_SYS_RX_ETH_BUFFER	16	/* number of eth rx buffers	*/
#endif

/*
 * Commands
 */
#include <config_cmd_default.h>

#define CONFIG_CMD_ASKENV
#if defined(CONFIG_440)
#define CONFIG_CMD_CACHE
#endif
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_DIAG
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_ELF
#define CONFIG_CMD_GREPENV
#define CONFIG_CMD_I2C
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_MII
#define CONFIG_CMD_NET
#define CONFIG_CMD_NFS
#define CONFIG_CMD_PING
#define CONFIG_CMD_REGINFO

/*
 * Miscellaneous configurable options
 */
#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size	*/
#else
#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size	*/
#endif
#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
#define CONFIG_SYS_MAXARGS		16	/* max number of command args	*/
#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size	*/

#define CONFIG_SYS_MEMTEST_START	0x0400000 /* memtest works on		*/
#define CONFIG_SYS_MEMTEST_END		0x0C00000 /* 4 ... 12 MB in DRAM	*/

#define CONFIG_SYS_LOAD_ADDR		0x100000  /* default load address	*/
#define CONFIG_SYS_EXTBDINFO			/* To use extended board_into (bd_t) */

#define CONFIG_CMDLINE_EDITING		/* add command line history	*/
#define CONFIG_AUTO_COMPLETE		/* add autocompletion support	*/
#define CONFIG_LOOPW			/* enable loopw command         */
#define CONFIG_MX_CYCLIC		/* enable mdc/mwc commands      */
#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
#define CONFIG_VERSION_VARIABLE 	/* include version env variable */
#define CONFIG_SYS_CONSOLE_INFO_QUIET	/* don't print console @ startup*/

#define CONFIG_SYS_HUSH_PARSER		/* Use the HUSH parser		*/

#define CONFIG_LOADS_ECHO		/* echo on for serial download	*/
#define CONFIG_SYS_LOADS_BAUD_CHANGE	/* allow baudrate change	*/

/*
 * BOOTP options
 */
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
#define CONFIG_BOOTP_SUBNETMASK

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 16 MB of memory, since this is
 * the maximum mapped by the 40x Linux kernel during initialization.
 */
#define CONFIG_SYS_BOOTMAPSZ		(16 << 20) /* Initial Memory map for Linux */
#define CONFIG_SYS_BOOTM_LEN		(16 << 20) /* Increase max gunzip size */

/*
 * Internal Definitions
 */
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port*/
#endif

/*
 * Pass open firmware flat tree
 */
#define CONFIG_OF_LIBFDT
#define CONFIG_OF_BOARD_SETUP
/* Update size in "reg" property of NOR FLASH device tree nodes */
#define CONFIG_FDT_FIXUP_NOR_FLASH_SIZE

/*
 * Booting and default environment
 */
#define CONFIG_PREBOOT	"echo;"	\
	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
	"echo"
#define CONFIG_BOOTCOMMAND	"run flash_self"

/*
 * Only very few boards have default console not on ttyS0 (like Taishan)
 */
#if !defined(CONFIG_USE_TTY)
#define CONFIG_USE_TTY	ttyS0
#endif

/*
 * Only very few boards have default netdev not set to eth0 (like Arches)
 */
#if !defined(CONFIG_USE_NETDEV)
#define CONFIG_USE_NETDEV	eth0
#endif

/*
 * Only some 4xx PPC's are equipped with an FPU
 */
#if defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \
    defined(CONFIG_460EX) || defined(CONFIG_460GT)
#define CONFIG_AMCC_DEF_ENV_ROOTPATH	"rootpath=/opt/eldk/ppc_4xxFP\0"
#else
#define CONFIG_AMCC_DEF_ENV_ROOTPATH	"rootpath=/opt/eldk/ppc_4xx\0"
#endif

/*
 * Only some boards need to extend the bootargs by some additional
 * parameters (like Makalu)
 */
#if !defined(CONFIG_ADDMISC)
#define CONFIG_ADDMISC	"addmisc=setenv bootargs ${bootargs}\0"
#endif

/*
 * General common environment variables shared on all AMCC eval boards
 */
#define CONFIG_AMCC_DEF_ENV						\
	"netdev=" __stringify(CONFIG_USE_NETDEV) "\0"				\
	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
		"nfsroot=${serverip}:${rootpath}\0"			\
	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
	"addip=setenv bootargs ${bootargs} "				\
		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
		":${hostname}:${netdev}:off panic=1\0"			\
	"addtty=setenv bootargs ${bootargs}"				\
		" console=" __stringify(CONFIG_USE_TTY) ",${baudrate}\0"	\
	CONFIG_ADDMISC							\
	"initrd_high=30000000\0"					\
	"kernel_addr_r=1000000\0"					\
	"fdt_addr_r=1800000\0"						\
	"ramdisk_addr_r=1900000\0"					\
	"hostname=" __stringify(CONFIG_HOSTNAME) "\0"				\
	"bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0"			\
	"ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/uRamdisk\0"		\
	CONFIG_AMCC_DEF_ENV_ROOTPATH

/*
 * Default environment for arch/powerpc booting
 * for boards that are ported to arch/powerpc
 */
#define CONFIG_AMCC_DEF_ENV_POWERPC					\
	"flash_self=run ramargs addip addtty addmisc;"			\
		"bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0"	\
	"flash_nfs=run nfsargs addip addtty addmisc;"			\
		"bootm ${kernel_addr} - ${fdt_addr}\0"			\
	"net_nfs=tftp ${kernel_addr_r} ${bootfile}; "			\
		"tftp ${fdt_addr_r} ${fdt_file}; "			\
		"run nfsargs addip addtty addmisc;"			\
		"bootm ${kernel_addr_r} - ${fdt_addr_r}\0"		\
	"net_self_load=tftp ${kernel_addr_r} ${bootfile};"		\
		"tftp ${fdt_addr_r} ${fdt_file};"			\
		"tftp ${ramdisk_addr_r} ${ramdisk_file};\0"		\
	"net_self=run net_self_load;"					\
		"run ramargs addip addtty addmisc;"			\
		"bootm ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}\0" \
	"fdt_file=" __stringify(CONFIG_HOSTNAME) "/" __stringify(CONFIG_HOSTNAME) ".dtb\0"

/*
 * Default environment for arch/ppc booting,
 * for boards that are not ported to arch/powerpc yet
 */
#define CONFIG_AMCC_DEF_ENV_PPC						\
	"flash_self=run ramargs addip addtty addmisc;"			\
		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
	"flash_nfs=run nfsargs addip addtty addmisc;"			\
		"bootm ${kernel_addr}\0"				\
	"net_nfs=tftp ${kernel_addr_r} ${bootfile};"			\
		"run nfsargs addip addtty addmisc;"			\
		"bootm ${kernel_addr_r}\0"

/*
 * Default environment for arch/ppc booting (old version),
 * for boards that are ported to arch/ppc and arch/powerpc
 */
#define CONFIG_AMCC_DEF_ENV_PPC_OLD					\
	"flash_self_old=run ramargs addip addtty addmisc;"		\
		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
	"flash_nfs_old=run nfsargs addip addtty addmisc;"		\
		"bootm ${kernel_addr}\0"				\
	"net_nfs_old=tftp ${kernel_addr_r} ${bootfile};"		\
		"run nfsargs addip addtty addmisc;"			\
		"bootm ${kernel_addr_r}\0"

#define CONFIG_AMCC_DEF_ENV_NOR_UPD					\
	"u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0"		\
	"load=tftp 200000 ${u-boot}\0"					\
	"update=protect off " __stringify(CONFIG_SYS_MONITOR_BASE) " FFFFFFFF;"	\
		"era " __stringify(CONFIG_SYS_MONITOR_BASE) " FFFFFFFF;"	\
		"cp.b ${fileaddr} " __stringify(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0" \
	"upd=run load update\0"						\

#endif /* __AMCC_COMMON_H */
Commit	Line	Data
a8a11a9e	1	/*
c8355b9d	2	* (C) Copyright 2008, 2009
a8a11a9e SR	3	* Stefan Roese, DENX Software Engineering, sr@denx.de.
	4	*
	5	* Common configuration options for all AMCC boards
	6	*
1a459660	7	* SPDX-License-Identifier: GPL-2.0+
a8a11a9e SR	8	*/
	9
	10	#ifndef __AMCC_COMMON_H
	11	#define __AMCC_COMMON_H
	12
5db75235 AG	13	#define CONFIG_SYS_GENERIC_BOARD
5db75235 AG	14
6d0f6bcf	15	#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* _must_ be 0 */
14d0a02a	16	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* Start of U-Boot */
6d0f6bcf JCPV	17	#define CONFIG_SYS_MONITOR_LEN (0xFFFFFFFF - CONFIG_SYS_MONITOR_BASE + 1)
6d0f6bcf JCPV	18	#define CONFIG_SYS_MALLOC_LEN (1 << 20) /* Reserved for malloc */
a8a11a9e SR	19
	20	/*
	21	* UART
	22	*/
550650dd SR	23	#define CONFIG_SYS_NS16550
550650dd SR	24	#define CONFIG_SYS_NS16550_SERIAL
0e7806d2	25	#ifndef CONFIG_DM_SERIAL
550650dd SR	26	#define CONFIG_SYS_NS16550_REG_SIZE 1
550650dd SR	27	#define CONFIG_SYS_NS16550_CLK get_serial_clock()
0e7806d2	28	#endif
550650dd	29	#define CONFIG_BAUDRATE 115200
6d0f6bcf	30	#define CONFIG_SYS_BAUDRATE_TABLE \
a8a11a9e SR	31	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
	32
	33	/*
	34	* I2C
	35	*/
880540de DE	36	#define CONFIG_SYS_I2C
	37	#define CONFIG_SYS_I2C_PPC4XX
	38	#define CONFIG_SYS_I2C_PPC4XX_CH0
	39	#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F
a8a11a9e SR	40
	41	/*
	42	* Ethernet/EMAC/PHY
	43	*/
96e21f86	44	#define CONFIG_PPC4xx_EMAC
a8a11a9e	45	#define CONFIG_MII /* MII PHY management */
a8a11a9e SR	46	#define CONFIG_NETCONSOLE /* include NetConsole support */
a8a11a9e SR	47	#if defined(CONFIG_440)
6d0f6bcf	48	#define CONFIG_SYS_RX_ETH_BUFFER 32 /* number of eth rx buffers */
a8a11a9e	49	#else
6d0f6bcf	50	#define CONFIG_SYS_RX_ETH_BUFFER 16 /* number of eth rx buffers */
a8a11a9e SR	51	#endif
	52
	53	/*
	54	* Commands
	55	*/
	56	#include <config_cmd_default.h>
	57
	58	#define CONFIG_CMD_ASKENV
	59	#if defined(CONFIG_440)
	60	#define CONFIG_CMD_CACHE
	61	#endif
	62	#define CONFIG_CMD_DHCP
	63	#define CONFIG_CMD_DIAG
	64	#define CONFIG_CMD_EEPROM
	65	#define CONFIG_CMD_ELF
3f9315c0	66	#define CONFIG_CMD_GREPENV
a8a11a9e SR	67	#define CONFIG_CMD_I2C
	68	#define CONFIG_CMD_IRQ
	69	#define CONFIG_CMD_MII
	70	#define CONFIG_CMD_NET
	71	#define CONFIG_CMD_NFS
	72	#define CONFIG_CMD_PING
	73	#define CONFIG_CMD_REGINFO
	74
	75	/*
	76	* Miscellaneous configurable options
	77	*/
	78	#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
6d0f6bcf	79	#define CONFIG_SYS_LONGHELP /* undef to save memory */
a8a11a9e	80	#if defined(CONFIG_CMD_KGDB)
6d0f6bcf	81	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
a8a11a9e	82	#else
6d0f6bcf	83	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
a8a11a9e	84	#endif
6d0f6bcf JCPV	85	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
	86	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	87	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
a8a11a9e	88
6d0f6bcf JCPV	89	#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
6d0f6bcf JCPV	90	#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
a8a11a9e	91
6d0f6bcf JCPV	92	#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
6d0f6bcf JCPV	93	#define CONFIG_SYS_EXTBDINFO /* To use extended board_into (bd_t) */
a8a11a9e	94
a8a11a9e SR	95	#define CONFIG_CMDLINE_EDITING /* add command line history */
	96	#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
	97	#define CONFIG_LOOPW /* enable loopw command */
	98	#define CONFIG_MX_CYCLIC /* enable mdc/mwc commands */
	99	#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
	100	#define CONFIG_VERSION_VARIABLE /* include version env variable */
c88840af	101	#define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup*/
a8a11a9e	102
c88840af	103	#define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */
a8a11a9e SR	104
a8a11a9e SR	105	#define CONFIG_LOADS_ECHO /* echo on for serial download */
c88840af	106	#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
a8a11a9e SR	107
	108	/*
	109	* BOOTP options
	110	*/
	111	#define CONFIG_BOOTP_BOOTFILESIZE
	112	#define CONFIG_BOOTP_BOOTPATH
	113	#define CONFIG_BOOTP_GATEWAY
	114	#define CONFIG_BOOTP_HOSTNAME
	115	#define CONFIG_BOOTP_SUBNETMASK
	116
	117	/*
	118	* For booting Linux, the board info and command line data
6942efc2 SR	119	* have to be in the first 16 MB of memory, since this is
6942efc2 SR	120	* the maximum mapped by the 40x Linux kernel during initialization.
a8a11a9e	121	*/
6942efc2 SR	122	#define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux */
6942efc2 SR	123	#define CONFIG_SYS_BOOTM_LEN (16 << 20) /* Increase max gunzip size */
a8a11a9e SR	124
	125	/*
	126	* Internal Definitions
	127	*/
	128	#if defined(CONFIG_CMD_KGDB)
	129	#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port*/
a8a11a9e SR	130	#endif
	131
	132	/*
	133	* Pass open firmware flat tree
	134	*/
	135	#define CONFIG_OF_LIBFDT
	136	#define CONFIG_OF_BOARD_SETUP
92b8964b SR	137	/* Update size in "reg" property of NOR FLASH device tree nodes */
92b8964b SR	138	#define CONFIG_FDT_FIXUP_NOR_FLASH_SIZE
a8a11a9e SR	139
	140	/*
	141	* Booting and default environment
	142	*/
	143	#define CONFIG_PREBOOT "echo;" \
	144	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
	145	"echo"
	146	#define CONFIG_BOOTCOMMAND "run flash_self"
	147
	148	/*
	149	* Only very few boards have default console not on ttyS0 (like Taishan)
	150	*/
	151	#if !defined(CONFIG_USE_TTY)
	152	#define CONFIG_USE_TTY ttyS0
	153	#endif
	154
f09f09d3 AG	155	/*
	156	* Only very few boards have default netdev not set to eth0 (like Arches)
	157	*/
	158	#if !defined(CONFIG_USE_NETDEV)
	159	#define CONFIG_USE_NETDEV eth0
	160	#endif
	161
a8a11a9e SR	162	/*
	163	* Only some 4xx PPC's are equipped with an FPU
	164	*/
	165	#if defined(CONFIG_440EP) \|\| defined(CONFIG_440EPX) \|\| \
	166	defined(CONFIG_460EX) \|\| defined(CONFIG_460GT)
	167	#define CONFIG_AMCC_DEF_ENV_ROOTPATH "rootpath=/opt/eldk/ppc_4xxFP\0"
	168	#else
	169	#define CONFIG_AMCC_DEF_ENV_ROOTPATH "rootpath=/opt/eldk/ppc_4xx\0"
	170	#endif
	171
	172	/*
	173	* Only some boards need to extend the bootargs by some additional
	174	* parameters (like Makalu)
	175	*/
	176	#if !defined(CONFIG_ADDMISC)
	177	#define CONFIG_ADDMISC "addmisc=setenv bootargs ${bootargs}\0"
	178	#endif
	179
a8a11a9e SR	180	/*
	181	* General common environment variables shared on all AMCC eval boards
	182	*/
	183	#define CONFIG_AMCC_DEF_ENV \
93ea89f0	184	"netdev=" __stringify(CONFIG_USE_NETDEV) "\0" \
a8a11a9e SR	185	"nfsargs=setenv bootargs root=/dev/nfs rw " \
	186	"nfsroot=${serverip}:${rootpath}\0" \
	187	"ramargs=setenv bootargs root=/dev/ram rw\0" \
	188	"addip=setenv bootargs ${bootargs} " \
	189	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
	190	":${hostname}:${netdev}:off panic=1\0" \
	191	"addtty=setenv bootargs ${bootargs}" \
93ea89f0	192	" console=" __stringify(CONFIG_USE_TTY) ",${baudrate}\0" \
a8a11a9e SR	193	CONFIG_ADDMISC \
a8a11a9e SR	194	"initrd_high=30000000\0" \
27dd5f8e SR	195	"kernel_addr_r=1000000\0" \
	196	"fdt_addr_r=1800000\0" \
	197	"ramdisk_addr_r=1900000\0" \
93ea89f0 MV	198	"hostname=" __stringify(CONFIG_HOSTNAME) "\0" \
	199	"bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0" \
	200	"ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/uRamdisk\0" \
a8a11a9e SR	201	CONFIG_AMCC_DEF_ENV_ROOTPATH
	202
	203	/*
	204	* Default environment for arch/powerpc booting
	205	* for boards that are ported to arch/powerpc
	206	*/
	207	#define CONFIG_AMCC_DEF_ENV_POWERPC \
	208	"flash_self=run ramargs addip addtty addmisc;" \
	209	"bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \
	210	"flash_nfs=run nfsargs addip addtty addmisc;" \
	211	"bootm ${kernel_addr} - ${fdt_addr}\0" \
	212	"net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \
	213	"tftp ${fdt_addr_r} ${fdt_file}; " \
	214	"run nfsargs addip addtty addmisc;" \
	215	"bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \
f09f09d3 AG	216	"net_self_load=tftp ${kernel_addr_r} ${bootfile};" \
	217	"tftp ${fdt_addr_r} ${fdt_file};" \
	218	"tftp ${ramdisk_addr_r} ${ramdisk_file};\0" \
	219	"net_self=run net_self_load;" \
	220	"run ramargs addip addtty addmisc;" \
	221	"bootm ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}\0" \
93ea89f0	222	"fdt_file=" __stringify(CONFIG_HOSTNAME) "/" __stringify(CONFIG_HOSTNAME) ".dtb\0"
a8a11a9e SR	223
	224	/*
	225	* Default environment for arch/ppc booting,
	226	* for boards that are not ported to arch/powerpc yet
	227	*/
	228	#define CONFIG_AMCC_DEF_ENV_PPC \
	229	"flash_self=run ramargs addip addtty addmisc;" \
	230	"bootm ${kernel_addr} ${ramdisk_addr}\0" \
	231	"flash_nfs=run nfsargs addip addtty addmisc;" \
	232	"bootm ${kernel_addr}\0" \
	233	"net_nfs=tftp ${kernel_addr_r} ${bootfile};" \
	234	"run nfsargs addip addtty addmisc;" \
	235	"bootm ${kernel_addr_r}\0"
	236
	237	/*
	238	* Default environment for arch/ppc booting (old version),
	239	* for boards that are ported to arch/ppc and arch/powerpc
	240	*/
	241	#define CONFIG_AMCC_DEF_ENV_PPC_OLD \
	242	"flash_self_old=run ramargs addip addtty addmisc;" \
	243	"bootm ${kernel_addr} ${ramdisk_addr}\0" \
	244	"flash_nfs_old=run nfsargs addip addtty addmisc;" \
	245	"bootm ${kernel_addr}\0" \
	246	"net_nfs_old=tftp ${kernel_addr_r} ${bootfile};" \
	247	"run nfsargs addip addtty addmisc;" \
	248	"bootm ${kernel_addr_r}\0"
	249
	250	#define CONFIG_AMCC_DEF_ENV_NOR_UPD \
93ea89f0	251	"u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0" \
c8355b9d	252	"load=tftp 200000 ${u-boot}\0" \
93ea89f0 MV	253	"update=protect off " __stringify(CONFIG_SYS_MONITOR_BASE) " FFFFFFFF;" \
	254	"era " __stringify(CONFIG_SYS_MONITOR_BASE) " FFFFFFFF;" \
	255	"cp.b ${fileaddr} " __stringify(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0" \
a8a11a9e SR	256	"upd=run load update\0" \
a8a11a9e SR	257
a8a11a9e	258	#endif /* __AMCC_COMMON_H */