]>
Commit | Line | Data |
---|---|---|
a8a11a9e | 1 | /* |
c8355b9d | 2 | * (C) Copyright 2008, 2009 |
a8a11a9e SR |
3 | * Stefan Roese, DENX Software Engineering, sr@denx.de. |
4 | * | |
5 | * Common configuration options for all AMCC boards | |
6 | * | |
1a459660 | 7 | * SPDX-License-Identifier: GPL-2.0+ |
a8a11a9e SR |
8 | */ |
9 | ||
10 | #ifndef __AMCC_COMMON_H | |
11 | #define __AMCC_COMMON_H | |
12 | ||
6d0f6bcf | 13 | #define CONFIG_SYS_SDRAM_BASE 0x00000000 /* _must_ be 0 */ |
14d0a02a | 14 | #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* Start of U-Boot */ |
6d0f6bcf JCPV |
15 | #define CONFIG_SYS_MONITOR_LEN (0xFFFFFFFF - CONFIG_SYS_MONITOR_BASE + 1) |
16 | #define CONFIG_SYS_MALLOC_LEN (1 << 20) /* Reserved for malloc */ | |
a8a11a9e SR |
17 | |
18 | /* | |
19 | * UART | |
20 | */ | |
550650dd | 21 | #define CONFIG_SYS_NS16550_SERIAL |
0e7806d2 | 22 | #ifndef CONFIG_DM_SERIAL |
550650dd SR |
23 | #define CONFIG_SYS_NS16550_REG_SIZE 1 |
24 | #define CONFIG_SYS_NS16550_CLK get_serial_clock() | |
0e7806d2 | 25 | #endif |
550650dd | 26 | #define CONFIG_BAUDRATE 115200 |
6d0f6bcf | 27 | #define CONFIG_SYS_BAUDRATE_TABLE \ |
a8a11a9e SR |
28 | {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} |
29 | ||
30 | /* | |
31 | * I2C | |
32 | */ | |
880540de DE |
33 | #define CONFIG_SYS_I2C |
34 | #define CONFIG_SYS_I2C_PPC4XX | |
35 | #define CONFIG_SYS_I2C_PPC4XX_CH0 | |
36 | #define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F | |
a8a11a9e SR |
37 | |
38 | /* | |
39 | * Ethernet/EMAC/PHY | |
40 | */ | |
96e21f86 | 41 | #define CONFIG_PPC4xx_EMAC |
a8a11a9e | 42 | #define CONFIG_MII /* MII PHY management */ |
a8a11a9e SR |
43 | #define CONFIG_NETCONSOLE /* include NetConsole support */ |
44 | #if defined(CONFIG_440) | |
6d0f6bcf | 45 | #define CONFIG_SYS_RX_ETH_BUFFER 32 /* number of eth rx buffers */ |
a8a11a9e | 46 | #else |
6d0f6bcf | 47 | #define CONFIG_SYS_RX_ETH_BUFFER 16 /* number of eth rx buffers */ |
a8a11a9e SR |
48 | #endif |
49 | ||
50 | /* | |
51 | * Commands | |
52 | */ | |
a8a11a9e | 53 | #if defined(CONFIG_440) |
a8a11a9e | 54 | #endif |
a8a11a9e SR |
55 | #define CONFIG_CMD_DIAG |
56 | #define CONFIG_CMD_EEPROM | |
a8a11a9e | 57 | #define CONFIG_CMD_IRQ |
a8a11a9e SR |
58 | #define CONFIG_CMD_REGINFO |
59 | ||
60 | /* | |
61 | * Miscellaneous configurable options | |
62 | */ | |
a8a11a9e | 63 | #if defined(CONFIG_CMD_KGDB) |
6d0f6bcf | 64 | #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ |
a8a11a9e | 65 | #else |
6d0f6bcf | 66 | #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ |
a8a11a9e | 67 | #endif |
6d0f6bcf JCPV |
68 | #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) |
69 | #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ | |
70 | #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ | |
a8a11a9e | 71 | |
6d0f6bcf JCPV |
72 | #define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ |
73 | #define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ | |
a8a11a9e | 74 | |
6d0f6bcf JCPV |
75 | #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ |
76 | #define CONFIG_SYS_EXTBDINFO /* To use extended board_into (bd_t) */ | |
a8a11a9e | 77 | |
a8a11a9e SR |
78 | #define CONFIG_CMDLINE_EDITING /* add command line history */ |
79 | #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ | |
a8a11a9e | 80 | #define CONFIG_MX_CYCLIC /* enable mdc/mwc commands */ |
c88840af | 81 | #define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup*/ |
a8a11a9e | 82 | |
a8a11a9e | 83 | #define CONFIG_LOADS_ECHO /* echo on for serial download */ |
c88840af | 84 | #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ |
a8a11a9e SR |
85 | |
86 | /* | |
87 | * BOOTP options | |
88 | */ | |
89 | #define CONFIG_BOOTP_BOOTFILESIZE | |
90 | #define CONFIG_BOOTP_BOOTPATH | |
91 | #define CONFIG_BOOTP_GATEWAY | |
92 | #define CONFIG_BOOTP_HOSTNAME | |
93 | #define CONFIG_BOOTP_SUBNETMASK | |
94 | ||
95 | /* | |
96 | * For booting Linux, the board info and command line data | |
6942efc2 SR |
97 | * have to be in the first 16 MB of memory, since this is |
98 | * the maximum mapped by the 40x Linux kernel during initialization. | |
a8a11a9e | 99 | */ |
6942efc2 SR |
100 | #define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux */ |
101 | #define CONFIG_SYS_BOOTM_LEN (16 << 20) /* Increase max gunzip size */ | |
a8a11a9e SR |
102 | |
103 | /* | |
104 | * Internal Definitions | |
105 | */ | |
106 | #if defined(CONFIG_CMD_KGDB) | |
107 | #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port*/ | |
a8a11a9e SR |
108 | #endif |
109 | ||
92b8964b SR |
110 | /* Update size in "reg" property of NOR FLASH device tree nodes */ |
111 | #define CONFIG_FDT_FIXUP_NOR_FLASH_SIZE | |
a8a11a9e SR |
112 | |
113 | /* | |
114 | * Booting and default environment | |
115 | */ | |
116 | #define CONFIG_PREBOOT "echo;" \ | |
117 | "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ | |
118 | "echo" | |
119 | #define CONFIG_BOOTCOMMAND "run flash_self" | |
120 | ||
121 | /* | |
122 | * Only very few boards have default console not on ttyS0 (like Taishan) | |
123 | */ | |
124 | #if !defined(CONFIG_USE_TTY) | |
125 | #define CONFIG_USE_TTY ttyS0 | |
126 | #endif | |
127 | ||
f09f09d3 AG |
128 | /* |
129 | * Only very few boards have default netdev not set to eth0 (like Arches) | |
130 | */ | |
131 | #if !defined(CONFIG_USE_NETDEV) | |
132 | #define CONFIG_USE_NETDEV eth0 | |
133 | #endif | |
134 | ||
a8a11a9e SR |
135 | /* |
136 | * Only some 4xx PPC's are equipped with an FPU | |
137 | */ | |
138 | #if defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \ | |
139 | defined(CONFIG_460EX) || defined(CONFIG_460GT) | |
140 | #define CONFIG_AMCC_DEF_ENV_ROOTPATH "rootpath=/opt/eldk/ppc_4xxFP\0" | |
141 | #else | |
142 | #define CONFIG_AMCC_DEF_ENV_ROOTPATH "rootpath=/opt/eldk/ppc_4xx\0" | |
143 | #endif | |
144 | ||
145 | /* | |
146 | * Only some boards need to extend the bootargs by some additional | |
147 | * parameters (like Makalu) | |
148 | */ | |
149 | #if !defined(CONFIG_ADDMISC) | |
150 | #define CONFIG_ADDMISC "addmisc=setenv bootargs ${bootargs}\0" | |
151 | #endif | |
152 | ||
a8a11a9e SR |
153 | /* |
154 | * General common environment variables shared on all AMCC eval boards | |
155 | */ | |
156 | #define CONFIG_AMCC_DEF_ENV \ | |
93ea89f0 | 157 | "netdev=" __stringify(CONFIG_USE_NETDEV) "\0" \ |
a8a11a9e SR |
158 | "nfsargs=setenv bootargs root=/dev/nfs rw " \ |
159 | "nfsroot=${serverip}:${rootpath}\0" \ | |
160 | "ramargs=setenv bootargs root=/dev/ram rw\0" \ | |
161 | "addip=setenv bootargs ${bootargs} " \ | |
162 | "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ | |
163 | ":${hostname}:${netdev}:off panic=1\0" \ | |
164 | "addtty=setenv bootargs ${bootargs}" \ | |
93ea89f0 | 165 | " console=" __stringify(CONFIG_USE_TTY) ",${baudrate}\0" \ |
a8a11a9e SR |
166 | CONFIG_ADDMISC \ |
167 | "initrd_high=30000000\0" \ | |
27dd5f8e SR |
168 | "kernel_addr_r=1000000\0" \ |
169 | "fdt_addr_r=1800000\0" \ | |
170 | "ramdisk_addr_r=1900000\0" \ | |
93ea89f0 MV |
171 | "hostname=" __stringify(CONFIG_HOSTNAME) "\0" \ |
172 | "bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0" \ | |
173 | "ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/uRamdisk\0" \ | |
a8a11a9e SR |
174 | CONFIG_AMCC_DEF_ENV_ROOTPATH |
175 | ||
176 | /* | |
177 | * Default environment for arch/powerpc booting | |
178 | * for boards that are ported to arch/powerpc | |
179 | */ | |
180 | #define CONFIG_AMCC_DEF_ENV_POWERPC \ | |
181 | "flash_self=run ramargs addip addtty addmisc;" \ | |
182 | "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ | |
183 | "flash_nfs=run nfsargs addip addtty addmisc;" \ | |
184 | "bootm ${kernel_addr} - ${fdt_addr}\0" \ | |
185 | "net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \ | |
186 | "tftp ${fdt_addr_r} ${fdt_file}; " \ | |
187 | "run nfsargs addip addtty addmisc;" \ | |
188 | "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \ | |
f09f09d3 AG |
189 | "net_self_load=tftp ${kernel_addr_r} ${bootfile};" \ |
190 | "tftp ${fdt_addr_r} ${fdt_file};" \ | |
191 | "tftp ${ramdisk_addr_r} ${ramdisk_file};\0" \ | |
192 | "net_self=run net_self_load;" \ | |
193 | "run ramargs addip addtty addmisc;" \ | |
194 | "bootm ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}\0" \ | |
93ea89f0 | 195 | "fdt_file=" __stringify(CONFIG_HOSTNAME) "/" __stringify(CONFIG_HOSTNAME) ".dtb\0" |
a8a11a9e SR |
196 | |
197 | /* | |
198 | * Default environment for arch/ppc booting, | |
199 | * for boards that are not ported to arch/powerpc yet | |
200 | */ | |
201 | #define CONFIG_AMCC_DEF_ENV_PPC \ | |
202 | "flash_self=run ramargs addip addtty addmisc;" \ | |
203 | "bootm ${kernel_addr} ${ramdisk_addr}\0" \ | |
204 | "flash_nfs=run nfsargs addip addtty addmisc;" \ | |
205 | "bootm ${kernel_addr}\0" \ | |
206 | "net_nfs=tftp ${kernel_addr_r} ${bootfile};" \ | |
207 | "run nfsargs addip addtty addmisc;" \ | |
208 | "bootm ${kernel_addr_r}\0" | |
209 | ||
210 | /* | |
211 | * Default environment for arch/ppc booting (old version), | |
212 | * for boards that are ported to arch/ppc and arch/powerpc | |
213 | */ | |
214 | #define CONFIG_AMCC_DEF_ENV_PPC_OLD \ | |
215 | "flash_self_old=run ramargs addip addtty addmisc;" \ | |
216 | "bootm ${kernel_addr} ${ramdisk_addr}\0" \ | |
217 | "flash_nfs_old=run nfsargs addip addtty addmisc;" \ | |
218 | "bootm ${kernel_addr}\0" \ | |
219 | "net_nfs_old=tftp ${kernel_addr_r} ${bootfile};" \ | |
220 | "run nfsargs addip addtty addmisc;" \ | |
221 | "bootm ${kernel_addr_r}\0" | |
222 | ||
223 | #define CONFIG_AMCC_DEF_ENV_NOR_UPD \ | |
93ea89f0 | 224 | "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0" \ |
c8355b9d | 225 | "load=tftp 200000 ${u-boot}\0" \ |
93ea89f0 MV |
226 | "update=protect off " __stringify(CONFIG_SYS_MONITOR_BASE) " FFFFFFFF;" \ |
227 | "era " __stringify(CONFIG_SYS_MONITOR_BASE) " FFFFFFFF;" \ | |
228 | "cp.b ${fileaddr} " __stringify(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0" \ | |
a8a11a9e SR |
229 | "upd=run load update\0" \ |
230 | ||
a8a11a9e | 231 | #endif /* __AMCC_COMMON_H */ |