[people/ms/u-boot.git] / include / configs / aristainetos-common.h

/*
 * (C) Copyright 2015
 * (C) Copyright 2014
 * Heiko Schocher, DENX Software Engineering, hs@denx.de.
 *
 * Based on:
 * Copyright (C) 2012 Freescale Semiconductor, Inc.
 *
 * Configuration settings for the Freescale i.MX6Q SabreSD board.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */
#ifndef __ARISTAINETOS_COMMON_CONFIG_H
#define __ARISTAINETOS_COMMON_CONFIG_H

#include "mx6_common.h"

#define CONFIG_MACH_TYPE	4501
#define CONFIG_MMCROOT		"/dev/mmcblk0p1"

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(64 * SZ_1M)

#define CONFIG_MXC_UART

/* MMC Configs */
#define CONFIG_SYS_FSL_ESDHC_ADDR      0

#define CONFIG_FEC_MXC
#define CONFIG_MII
#define IMX_FEC_BASE			ENET_BASE_ADDR
#define CONFIG_ETHPRIME			"FEC"
#define CONFIG_FEC_MXC_PHYADDR		0

#define CONFIG_PHYLIB
#define CONFIG_PHY_MICREL

#define CONFIG_SPI_FLASH_MTD
#define CONFIG_MXC_SPI
#define CONFIG_SF_DEFAULT_SPEED		20000000
#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
#define CONFIG_SYS_SPI_ST_ENABLE_WP_PIN

#define CONFIG_EXTRA_ENV_SETTINGS \
	"script=u-boot.scr\0" \
	"fit_file=/boot/system.itb\0" \
	"loadaddr=0x12000000\0" \
	"fit_addr_r=0x14000000\0" \
	"uboot=/boot/u-boot.imx\0" \
	"uboot_sz=d0000\0" \
	"rescue_sys_addr=f0000\0" \
	"rescue_sys_length=f10000\0" \
	"panel=lb07wv8\0" \
	"splashpos=m,m\0" \
	"console=" CONSOLE_DEV "\0" \
	"fdt_high=0xffffffff\0"	  \
	"initrd_high=0xffffffff\0" \
	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
	"set_fit_default=fdt addr ${fit_addr_r};fdt set /configurations " \
		"default ${board_type}\0" \
	"get_env=mw ${loadaddr} 0 0x20000;" \
		"mmc rescan;" \
		"ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} env.txt;" \
		"env import -t ${loadaddr}\0" \
	"default_env=mw ${loadaddr} 0 0x20000;" \
		"env export -t ${loadaddr} serial# ethaddr eth1addr " \
		"board_type panel;" \
		"env default -a;" \
		"env import -t ${loadaddr}\0" \
	"loadbootscript=" \
		"ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	"bootscript=echo Running bootscript from mmc ...; " \
		"source\0" \
	"mmcpart=1\0" \
	"mmcdev=0\0" \
	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
	"mmcargs=setenv bootargs console=${console},${baudrate} " \
		"root=${mmcroot}\0" \
	"mmcboot=echo Booting from mmc ...; " \
		"run mmcargs addmtd addmisc set_fit_default;" \
		"bootm ${fit_addr_r}\0" \
	"mmc_load_fit=ext2load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \
		"${fit_file}\0" \
	"mmc_load_uboot=ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
		"${uboot}\0" \
	"mmc_upd_uboot=mw.b ${loadaddr} 0xff ${uboot_sz};" \
		"setexpr cmp_buf ${loadaddr} + ${uboot_sz};" \
		"setexpr uboot_maxsize ${uboot_sz} - 400;" \
		"mw.b ${cmp_buf} 0x00 ${uboot_sz};" \
		"run mmc_load_uboot;sf probe;sf erase 0 ${uboot_sz};" \
		"sf write ${loadaddr} 400 ${filesize};" \
		"sf read ${cmp_buf} 400 ${uboot_sz};" \
		"cmp.b ${loadaddr} ${cmp_buf} ${uboot_maxsize}\0" \
	"ubiboot=echo Booting from ubi ...; " \
		"run ubiargs addmtd addmisc set_fit_default;" \
		"bootm ${fit_addr_r}\0" \
	"rescueargs=setenv bootargs console=${console},${baudrate} " \
		"root=/dev/ram rw\0 " \
	"rescueboot=echo Booting rescue system from NOR ...; " \
		"run rescueargs addmtd addmisc set_fit_default;" \
		"bootm ${fit_addr_r}\0" \
	"rescue_load_fit=sf probe;sf read ${fit_addr_r} ${rescue_sys_addr} " \
		"${rescue_sys_length}; imi ${fit_addr_r}\0" \
	CONFIG_EXTRA_ENV_BOARD_SETTINGS

#define CONFIG_BOOTCOMMAND \
	"mmc dev ${mmcdev};" \
	"if mmc rescan; then " \
		"if run loadbootscript; then " \
			"run bootscript; " \
		"else " \
			"if run mmc_load_fit; then " \
				"run mmcboot; " \
			"else " \
				"if run ubifs_load_fit; then " \
					"run ubiboot; " \
				"else " \
					"if run rescue_load_fit; then " \
						"run rescueboot; " \
					"else " \
						"echo RESCUE SYSTEM BOOT " \
							"FAILURE;" \
					"fi; " \
				"fi; " \
			"fi; " \
		"fi; " \
	"else " \
		"if run ubifs_load_fit; then " \
			"run ubiboot; " \
		"else " \
			"if run rescue_load_fit; then " \
				"run rescueboot; " \
			"else " \
				"echo RESCUE SYSTEM BOOT FAILURE;" \
			"fi; " \
		"fi; " \
	"fi"

#define CONFIG_ARP_TIMEOUT		200UL

/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)

#define CONFIG_SYS_MEMTEST_START	PHYS_SDRAM
#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 0x100000)
#define CONFIG_SYS_MEMTEST_SCRATCH	0x10800000

/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS		1
#define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR

#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/* Environment organization */
#define CONFIG_ENV_SIZE			(12 * 1024)
#define CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
#define CONFIG_ENV_SPI_BUS		CONFIG_SF_DEFAULT_BUS
#define CONFIG_ENV_SPI_CS		CONFIG_SF_DEFAULT_CS
#define CONFIG_ENV_SPI_MAX_HZ		CONFIG_SF_DEFAULT_SPEED
#define CONFIG_ENV_SPI_MODE		CONFIG_SF_DEFAULT_MODE
#define CONFIG_ENV_SECT_SIZE		(0x010000)
#define CONFIG_ENV_OFFSET		(0x0d0000)
#define CONFIG_ENV_OFFSET_REDUND	(0x0e0000)

#define CONFIG_SYS_FSL_USDHC_NUM	2

/* I2C */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
#define CONFIG_SYS_I2C_SPEED		100000
#define CONFIG_SYS_I2C_SLAVE		0x7f
#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x00} }

/* NAND stuff */
#define CONFIG_CMD_NAND
#define CONFIG_CMD_NAND_TRIMFFS
#define CONFIG_NAND_MXS
#define CONFIG_SYS_MAX_NAND_DEVICE	1
#define CONFIG_SYS_NAND_BASE		0x40000000
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_ONFI_DETECTION

/* DMA stuff, needed for GPMI/MXS NAND support */
#define CONFIG_APBH_DMA
#define CONFIG_APBH_DMA_BURST
#define CONFIG_APBH_DMA_BURST8

/* RTC */
#define CONFIG_SYS_I2C_RTC_ADDR	0x68
#define CONFIG_SYS_RTC_BUS_NUM	2
#define CONFIG_RTC_M41T11

/* USB Configs */
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET	/* For OTG port */
#define CONFIG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS	0

/* UBI support */
#define CONFIG_MTD_PARTITIONS
#define CONFIG_MTD_DEVICE

#define CONFIG_HW_WATCHDOG
#define CONFIG_IMX_WATCHDOG

/* Framebuffer */
#define CONFIG_VIDEO_IPUV3
/* check this console not needed, after test remove it */
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_SPLASH_SCREEN
#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_BMP_LOGO
#define CONFIG_IPUV3_CLK 198000000
#define CONFIG_IMX_VIDEO_SKIP

#define CONFIG_PWM_IMX
#define CONFIG_IMX6_PWM_PER_CLK	66000000

#endif /* __ARISTAINETOS_COMMON_CONFIG_H */
Commit	Line	Data
7254d92e HS	1	/*
	2	* (C) Copyright 2015
	3	* (C) Copyright 2014
	4	* Heiko Schocher, DENX Software Engineering, hs@denx.de.
	5	*
	6	* Based on:
	7	* Copyright (C) 2012 Freescale Semiconductor, Inc.
	8	*
	9	* Configuration settings for the Freescale i.MX6Q SabreSD board.
	10	*
	11	* SPDX-License-Identifier: GPL-2.0+
	12	*/
	13	#ifndef __ARISTAINETOS_COMMON_CONFIG_H
	14	#define __ARISTAINETOS_COMMON_CONFIG_H
	15
7254d92e	16	#include "mx6_common.h"
7254d92e	17
7254d92e HS	18	#define CONFIG_MACH_TYPE 4501
7254d92e HS	19	#define CONFIG_MMCROOT "/dev/mmcblk0p1"
7254d92e	20
7254d92e HS	21	/* Size of malloc() pool */
	22	#define CONFIG_SYS_MALLOC_LEN (64 * SZ_1M)
	23
7254d92e HS	24	#define CONFIG_MXC_UART
7254d92e HS	25
7254d92e	26	/* MMC Configs */
7254d92e HS	27	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
7254d92e HS	28
7254d92e HS	29	#define CONFIG_FEC_MXC
	30	#define CONFIG_MII
	31	#define IMX_FEC_BASE ENET_BASE_ADDR
	32	#define CONFIG_ETHPRIME "FEC"
	33	#define CONFIG_FEC_MXC_PHYADDR 0
	34
	35	#define CONFIG_PHYLIB
	36	#define CONFIG_PHY_MICREL
	37
7254d92e	38	#define CONFIG_SPI_FLASH_MTD
7254d92e	39	#define CONFIG_MXC_SPI
7254d92e HS	40	#define CONFIG_SF_DEFAULT_SPEED 20000000
	41	#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
	42	#define CONFIG_SYS_SPI_ST_ENABLE_WP_PIN
	43
7254d92e HS	44	#define CONFIG_EXTRA_ENV_SETTINGS \
	45	"script=u-boot.scr\0" \
	46	"fit_file=/boot/system.itb\0" \
	47	"loadaddr=0x12000000\0" \
	48	"fit_addr_r=0x14000000\0" \
	49	"uboot=/boot/u-boot.imx\0" \
	50	"uboot_sz=d0000\0" \
	51	"rescue_sys_addr=f0000\0" \
	52	"rescue_sys_length=f10000\0" \
	53	"panel=lb07wv8\0" \
	54	"splashpos=m,m\0" \
12ca05a3	55	"console=" CONSOLE_DEV "\0" \
7254d92e HS	56	"fdt_high=0xffffffff\0" \
	57	"initrd_high=0xffffffff\0" \
	58	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
	59	"set_fit_default=fdt addr ${fit_addr_r};fdt set /configurations " \
	60	"default ${board_type}\0" \
	61	"get_env=mw ${loadaddr} 0 0x20000;" \
	62	"mmc rescan;" \
	63	"ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} env.txt;" \
	64	"env import -t ${loadaddr}\0" \
	65	"default_env=mw ${loadaddr} 0 0x20000;" \
	66	"env export -t ${loadaddr} serial# ethaddr eth1addr " \
	67	"board_type panel;" \
	68	"env default -a;" \
	69	"env import -t ${loadaddr}\0" \
	70	"loadbootscript=" \
	71	"ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	72	"bootscript=echo Running bootscript from mmc ...; " \
	73	"source\0" \
	74	"mmcpart=1\0" \
	75	"mmcdev=0\0" \
	76	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
	77	"mmcargs=setenv bootargs console=${console},${baudrate} " \
	78	"root=${mmcroot}\0" \
	79	"mmcboot=echo Booting from mmc ...; " \
	80	"run mmcargs addmtd addmisc set_fit_default;" \
	81	"bootm ${fit_addr_r}\0" \
	82	"mmc_load_fit=ext2load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \
	83	"${fit_file}\0" \
	84	"mmc_load_uboot=ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
	85	"${uboot}\0" \
	86	"mmc_upd_uboot=mw.b ${loadaddr} 0xff ${uboot_sz};" \
	87	"setexpr cmp_buf ${loadaddr} + ${uboot_sz};" \
	88	"setexpr uboot_maxsize ${uboot_sz} - 400;" \
	89	"mw.b ${cmp_buf} 0x00 ${uboot_sz};" \
	90	"run mmc_load_uboot;sf probe;sf erase 0 ${uboot_sz};" \
	91	"sf write ${loadaddr} 400 ${filesize};" \
	92	"sf read ${cmp_buf} 400 ${uboot_sz};" \
	93	"cmp.b ${loadaddr} ${cmp_buf} ${uboot_maxsize}\0" \
	94	"ubiboot=echo Booting from ubi ...; " \
	95	"run ubiargs addmtd addmisc set_fit_default;" \
	96	"bootm ${fit_addr_r}\0" \
7254d92e HS	97	"rescueargs=setenv bootargs console=${console},${baudrate} " \
	98	"root=/dev/ram rw\0 " \
	99	"rescueboot=echo Booting rescue system from NOR ...; " \
	100	"run rescueargs addmtd addmisc set_fit_default;" \
	101	"bootm ${fit_addr_r}\0" \
	102	"rescue_load_fit=sf probe;sf read ${fit_addr_r} ${rescue_sys_addr} " \
	103	"${rescue_sys_length}; imi ${fit_addr_r}\0" \
	104	CONFIG_EXTRA_ENV_BOARD_SETTINGS
	105
	106	#define CONFIG_BOOTCOMMAND \
	107	"mmc dev ${mmcdev};" \
	108	"if mmc rescan; then " \
	109	"if run loadbootscript; then " \
	110	"run bootscript; " \
	111	"else " \
	112	"if run mmc_load_fit; then " \
	113	"run mmcboot; " \
	114	"else " \
	115	"if run ubifs_load_fit; then " \
	116	"run ubiboot; " \
	117	"else " \
	118	"if run rescue_load_fit; then " \
	119	"run rescueboot; " \
	120	"else " \
	121	"echo RESCUE SYSTEM BOOT " \
	122	"FAILURE;" \
	123	"fi; " \
	124	"fi; " \
	125	"fi; " \
	126	"fi; " \
	127	"else " \
	128	"if run ubifs_load_fit; then " \
	129	"run ubiboot; " \
	130	"else " \
	131	"if run rescue_load_fit; then " \
	132	"run rescueboot; " \
	133	"else " \
	134	"echo RESCUE SYSTEM BOOT FAILURE;" \
	135	"fi; " \
	136	"fi; " \
	137	"fi"
	138
	139	#define CONFIG_ARP_TIMEOUT 200UL
	140
7254d92e HS	141	/* Print Buffer Size */
7254d92e HS	142	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
7254d92e HS	143
	144	#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
	145	#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x100000)
	146	#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
	147
7254d92e HS	148	/* Physical Memory Map */
	149	#define CONFIG_NR_DRAM_BANKS 1
	150	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
	151
	152	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	153	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	154	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	155
	156	#define CONFIG_SYS_INIT_SP_OFFSET \
	157	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	158	#define CONFIG_SYS_INIT_SP_ADDR \
	159	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	160
056845c2	161	/* Environment organization */
7254d92e HS	162	#define CONFIG_ENV_SIZE (12 * 1024)
	163	#define CONFIG_ENV_IS_IN_SPI_FLASH
	164	#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
	165	#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
	166	#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
	167	#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
	168	#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
	169	#define CONFIG_ENV_SECT_SIZE (0x010000)
	170	#define CONFIG_ENV_OFFSET (0x0d0000)
	171	#define CONFIG_ENV_OFFSET_REDUND (0x0e0000)
	172
7254d92e HS	173	#define CONFIG_SYS_FSL_USDHC_NUM 2
	174
	175	/* I2C */
7254d92e HS	176	#define CONFIG_SYS_I2C
7254d92e HS	177	#define CONFIG_SYS_I2C_MXC
03544c66 AA	178	#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
03544c66 AA	179	#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
7254d92e HS	180	#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
	181	#define CONFIG_SYS_I2C_SPEED 100000
	182	#define CONFIG_SYS_I2C_SLAVE 0x7f
	183	#define CONFIG_SYS_I2C_NOPROBES { {0, 0x00} }
	184
7254d92e HS	185	/* NAND stuff */
	186	#define CONFIG_CMD_NAND
	187	#define CONFIG_CMD_NAND_TRIMFFS
	188	#define CONFIG_NAND_MXS
	189	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	190	#define CONFIG_SYS_NAND_BASE 0x40000000
	191	#define CONFIG_SYS_NAND_5_ADDR_CYCLE
	192	#define CONFIG_SYS_NAND_ONFI_DETECTION
	193
	194	/* DMA stuff, needed for GPMI/MXS NAND support */
	195	#define CONFIG_APBH_DMA
	196	#define CONFIG_APBH_DMA_BURST
	197	#define CONFIG_APBH_DMA_BURST8
	198
	199	/* RTC */
	200	#define CONFIG_SYS_I2C_RTC_ADDR 0x68
	201	#define CONFIG_SYS_RTC_BUS_NUM 2
	202	#define CONFIG_RTC_M41T11
7254d92e HS	203
7254d92e HS	204	/* USB Configs */
7254d92e HS	205	#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
	206	#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
	207	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
	208	#define CONFIG_MXC_USB_FLAGS 0
	209
	210	/* UBI support */
7254d92e HS	211	#define CONFIG_MTD_PARTITIONS
7254d92e HS	212	#define CONFIG_MTD_DEVICE
7254d92e	213
7254d92e HS	214	#define CONFIG_HW_WATCHDOG
	215	#define CONFIG_IMX_WATCHDOG
	216
7254d92e	217	/* Framebuffer */
7254d92e HS	218	#define CONFIG_VIDEO_IPUV3
7254d92e HS	219	/* check this console not needed, after test remove it */
7254d92e HS	220	#define CONFIG_VIDEO_BMP_RLE8
	221	#define CONFIG_SPLASH_SCREEN
	222	#define CONFIG_SPLASH_SCREEN_ALIGN
	223	#define CONFIG_BMP_16BPP
	224	#define CONFIG_VIDEO_LOGO
	225	#define CONFIG_VIDEO_BMP_LOGO
	226	#define CONFIG_IPUV3_CLK 198000000
	227	#define CONFIG_IMX_VIDEO_SKIP
	228
7254d92e HS	229	#define CONFIG_PWM_IMX
	230	#define CONFIG_IMX6_PWM_PER_CLK 66000000
	231
	232	#endif /* __ARISTAINETOS_COMMON_CONFIG_H */