[people/ms/u-boot.git] / include / configs / aristainetos.h

/*
 * (C) Copyright 2015
 * (C) Copyright 2014
 * Heiko Schocher, DENX Software Engineering, hs@denx.de.
 *
 * Based on:
 * Copyright (C) 2012 Freescale Semiconductor, Inc.
 *
 * Configuration settings for the Freescale i.MX6Q SabreSD board.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */
#ifndef __ARISTAINETOS_CONFIG_H
#define __ARISTAINETOS_CONFIG_H

#define CONFIG_MX6

#include "mx6_common.h"
#include <linux/sizes.h>

#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO

#include <asm/arch/imx-regs.h>
#include <asm/imx-common/gpio.h>

#define CONFIG_MACH_TYPE	4501
#define CONFIG_MMCROOT		"/dev/mmcblk0p1"
#define CONFIG_HOSTNAME		aristainetos
#define PHYS_SDRAM_SIZE		(1u * 1024 * 1024 * 1024)

#define CONFIG_SYS_GENERIC_BOARD

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(64 * SZ_1M)

#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_MXC_GPIO

#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE	UART5_BASE
#define CONFIG_CONSOLE_DEV	"ttymxc4"

#define CONFIG_CMD_FUSE
#define CONFIG_MXC_OCOTP

/* MMC Configs */
#define CONFIG_FSL_ESDHC
#define CONFIG_FSL_USDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR      0

#define CONFIG_MMC
#define CONFIG_CMD_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_BOUNCE_BUFFER
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_FAT
#define CONFIG_DOS_PARTITION

#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_MII
#define CONFIG_CMD_NET
#define CONFIG_FEC_MXC
#define CONFIG_MII
#define IMX_FEC_BASE			ENET_BASE_ADDR
#define CONFIG_FEC_XCV_TYPE		RMII
#define CONFIG_ETHPRIME			"FEC"
#define CONFIG_FEC_MXC_PHYADDR		0

#define CONFIG_PHYLIB
#define CONFIG_PHY_MICREL

#define CONFIG_CMD_SF
#define CONFIG_SPI_FLASH
#define CONFIG_SPI_FLASH_MTD
#define CONFIG_SPI_FLASH_STMICRO
#define CONFIG_MXC_SPI
#define CONFIG_SF_DEFAULT_BUS		3
#define CONFIG_SF_DEFAULT_CS		0
#define CONFIG_SF_DEFAULT_SPEED		20000000
#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
#define CONFIG_SYS_SPI_ST_ENABLE_WP_PIN
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX		1
#define CONFIG_BAUDRATE			115200

/* Command definition */
#include <config_cmd_default.h>

#define CONFIG_CMD_BMODE
#define CONFIG_CMD_BOOTZ
#define CONFIG_CMD_SETEXPR
#undef CONFIG_CMD_IMLS

#define CONFIG_BOOTDELAY		3

#define CONFIG_LOADADDR			0x12000000
#define CONFIG_SYS_TEXT_BASE		0x17800000

#define CONFIG_EXTRA_ENV_SETTINGS \
	"script=u-boot.scr\0" \
	"fit_file=/boot/system.itb\0" \
	"loadaddr=0x12000000\0" \
	"fit_addr_r=0x14000000\0" \
	"uboot=/boot/u-boot.imx\0" \
	"uboot_sz=d0000\0" \
	"rescue_sys_addr=f0000\0" \
	"rescue_sys_length=f10000\0" \
	"board_type=aristainetos7@1\0" \
	"panel=lb07wv8\0" \
	"splashpos=m,m\0" \
	"console=" CONFIG_CONSOLE_DEV "\0" \
	"fdt_high=0xffffffff\0"	  \
	"initrd_high=0xffffffff\0" \
	"mtdids=nand0=gpmi-nand,nor0=spi3.0\0" \
	"mtdparts=mtdparts=spi3.0:832k(u-boot),64k(env),64k(env-red)," \
		"-(rescue-system);gpmi-nand:-(ubi)\0" \
	"addmisc=setenv bootargs ${bootargs} consoleblank=0\0" \
	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
	"set_fit_default=fdt addr ${fit_addr_r};fdt set /configurations " \
		"default ${board_type}\0" \
	"get_env=mw ${loadaddr} 0 0x20000;" \
		"mmc rescan;" \
		"ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} env.txt;" \
		"env import -t ${loadaddr}\0" \
	"default_env=mw ${loadaddr} 0 0x20000;" \
		"env export -t ${loadaddr} serial# ethaddr eth1addr " \
		"board_type panel;" \
		"env default -a;" \
		"env import -t ${loadaddr}\0" \
	"loadbootscript=" \
		"ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	"bootscript=echo Running bootscript from mmc ...; " \
		"source\0" \
	"mmcpart=1\0" \
	"mmcdev=0\0" \
	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
	"mmcargs=setenv bootargs console=${console},${baudrate} " \
		"root=${mmcroot}\0" \
	"mmcboot=echo Booting from mmc ...; " \
		"run mmcargs addmtd addmisc set_fit_default;" \
		"bootm ${fit_addr_r}\0" \
	"mmc_load_fit=ext2load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \
		"${fit_file}\0" \
	"mmc_load_uboot=ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
		"${uboot}\0" \
	"mmc_upd_uboot=mw.b ${loadaddr} 0xff ${uboot_sz};" \
		"setexpr cmp_buf ${loadaddr} + ${uboot_sz};" \
		"setexpr uboot_maxsize ${uboot_sz} - 400;" \
		"mw.b ${cmp_buf} 0x00 ${uboot_sz};" \
		"run mmc_load_uboot;sf probe;sf erase 0 ${uboot_sz};" \
		"sf write ${loadaddr} 400 ${filesize};" \
		"sf read ${cmp_buf} 400 ${uboot_sz};" \
		"cmp.b ${loadaddr} ${cmp_buf} ${uboot_maxsize}\0" \
	"ubiargs=setenv bootargs console=${console},${baudrate} " \
		"ubi.mtd=0,2048 root=ubi0:rootfs rootfstype=ubifs\0 " \
	"ubiboot=echo Booting from ubi ...; " \
		"run ubiargs addmtd addmisc set_fit_default;" \
		"bootm ${fit_addr_r}\0" \
	"ubifs_load_fit=sf probe;ubi part ubi 2048;ubifsmount ubi:rootfs;" \
		"ubifsload ${fit_addr_r} /boot/system.itb; " \
		"imi ${fit_addr_r}\0 " \
	"rescueargs=setenv bootargs console=${console},${baudrate} " \
		"root=/dev/ram rw\0 " \
	"rescueboot=echo Booting rescue system from NOR ...; " \
		"run rescueargs addmtd addmisc set_fit_default;" \
		"bootm ${fit_addr_r}\0" \
	"rescue_load_fit=sf probe;sf read ${fit_addr_r} ${rescue_sys_addr} " \
		"${rescue_sys_length}; imi ${fit_addr_r}\0 "

#define CONFIG_BOOTCOMMAND \
	"mmc dev ${mmcdev};" \
	"if mmc rescan; then " \
		"if run loadbootscript; then " \
			"run bootscript; " \
		"else " \
			"if run mmc_load_fit; then " \
				"run mmcboot; " \
			"else " \
				"if run ubifs_load_fit; then " \
					"run ubiboot; " \
				"else " \
					"if run rescue_load_fit; then " \
						"run rescueboot; " \
					"else " \
						"echo RESCUE SYSTEM BOOT " \
							"FAILURE;" \
					"fi; " \
				"fi; " \
			"fi; " \
		"fi; " \
	"else " \
		"if run ubifs_load_fit; then " \
			"run ubiboot; " \
		"else " \
			"if run rescue_load_fit; then " \
				"run rescueboot; " \
			"else " \
				"echo RESCUE SYSTEM BOOT FAILURE;" \
			"fi; " \
		"fi; " \
	"fi"

#define CONFIG_ARP_TIMEOUT		200UL

/* Miscellaneous configurable options */
#define CONFIG_SYS_LONGHELP
#define CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
#define CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_CBSIZE		256

/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_MAXARGS             16
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE

#define CONFIG_SYS_MEMTEST_START	PHYS_SDRAM
#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 0x100000)
#define CONFIG_SYS_MEMTEST_SCRATCH	0x10800000

#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR

#define CONFIG_CMDLINE_EDITING
#define CONFIG_STACKSIZE		(128 * 1024)

/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS		1
#define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR

#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/* FLASH and environment organization */
#define CONFIG_SYS_NO_FLASH

#define CONFIG_ENV_SIZE			(12 * 1024)
#define CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
#define CONFIG_ENV_SPI_BUS		CONFIG_SF_DEFAULT_BUS
#define CONFIG_ENV_SPI_CS		CONFIG_SF_DEFAULT_CS
#define CONFIG_ENV_SPI_MAX_HZ		CONFIG_SF_DEFAULT_SPEED
#define CONFIG_ENV_SPI_MODE		CONFIG_SF_DEFAULT_MODE
#define CONFIG_ENV_SECT_SIZE		(0x010000)
#define CONFIG_ENV_OFFSET		(0x0d0000)
#define CONFIG_ENV_OFFSET_REDUND	(0x0e0000)

#define CONFIG_OF_LIBFDT

#define CONFIG_CMD_CACHE

#define CONFIG_SYS_FSL_USDHC_NUM	2

#define CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_SPEED		100000
#define CONFIG_SYS_I2C_SLAVE		0x7f
#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x00} }

#define CONFIG_CMD_GPIO
#define CONFIG_GPIO_ENABLE_SPI_FLASH	IMX_GPIO_NR(2, 15)

/* NAND stuff */
#define CONFIG_CMD_NAND
#define CONFIG_CMD_NAND_TRIMFFS
#define CONFIG_NAND_MXS
#define CONFIG_SYS_MAX_NAND_DEVICE	1
#define CONFIG_SYS_NAND_BASE		0x40000000
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_ONFI_DETECTION

/* DMA stuff, needed for GPMI/MXS NAND support */
#define CONFIG_APBH_DMA
#define CONFIG_APBH_DMA_BURST
#define CONFIG_APBH_DMA_BURST8

/* RTC */
#define CONFIG_SYS_I2C_RTC_ADDR	0x68
#define CONFIG_SYS_RTC_BUS_NUM	2
#define CONFIG_RTC_M41T11
#define CONFIG_CMD_DATE

/* USB Configs */
#define CONFIG_CMD_USB
#define CONFIG_CMD_FAT
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_MX6
#define CONFIG_USB_STORAGE
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET	/* For OTG port */
#define CONFIG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS	0

#define ARISTAINETOS_USB_OTG_PWR	IMX_GPIO_NR(4, 15)
#define ARISTAINETOS_USB_H1_PWR		IMX_GPIO_NR(3, 31)

/* UBI support */
#define CONFIG_CMD_MTDPARTS
#define CONFIG_MTD_PARTITIONS
#define CONFIG_MTD_DEVICE
#define CONFIG_RBTREE
#define CONFIG_LZO
#define CONFIG_CMD_UBI
#define CONFIG_CMD_UBIFS

#define CONFIG_MTD_UBI_FASTMAP
#define CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT	1

#define CONFIG_HW_WATCHDOG
#define CONFIG_IMX_WATCHDOG

#define CONFIG_FIT

/* Framebuffer */
#define CONFIG_VIDEO
#define CONFIG_VIDEO_IPUV3
/* check this console not needed, after test remove it */
#define CONFIG_CFB_CONSOLE
#define CONFIG_VGA_AS_SINGLE_DEVICE
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_SPLASH_SCREEN
#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_BMP_LOGO
#define CONFIG_IPUV3_CLK 198000000
#define CONFIG_IMX_VIDEO_SKIP

#define CONFIG_CMD_BMP

#define CONFIG_PWM_IMX
#define CONFIG_IMX6_PWM_PER_CLK	66000000
#endif                         /* __ARISTAINETOS_CONFIG_H */
Commit	Line	Data
e379c039	1	/*
b4b39a7e	2	* (C) Copyright 2015
e379c039 HS	3	* (C) Copyright 2014
	4	* Heiko Schocher, DENX Software Engineering, hs@denx.de.
	5	*
	6	* Based on:
	7	* Copyright (C) 2012 Freescale Semiconductor, Inc.
	8	*
	9	* Configuration settings for the Freescale i.MX6Q SabreSD board.
	10	*
	11	* SPDX-License-Identifier: GPL-2.0+
	12	*/
	13	#ifndef __ARISTAINETOS_CONFIG_H
	14	#define __ARISTAINETOS_CONFIG_H
	15
	16	#define CONFIG_MX6
	17
	18	#include "mx6_common.h"
	19	#include <linux/sizes.h>
	20
	21	#define CONFIG_DISPLAY_CPUINFO
	22	#define CONFIG_DISPLAY_BOARDINFO
	23
	24	#include <asm/arch/imx-regs.h>
	25	#include <asm/imx-common/gpio.h>
	26
	27	#define CONFIG_MACH_TYPE 4501
b4b39a7e	28	#define CONFIG_MMCROOT "/dev/mmcblk0p1"
e379c039 HS	29	#define CONFIG_HOSTNAME aristainetos
	30	#define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024)
	31
	32	#define CONFIG_SYS_GENERIC_BOARD
	33
	34	/* Size of malloc() pool */
	35	#define CONFIG_SYS_MALLOC_LEN (64 * SZ_1M)
	36
	37	#define CONFIG_BOARD_EARLY_INIT_F
	38	#define CONFIG_MXC_GPIO
	39
	40	#define CONFIG_MXC_UART
	41	#define CONFIG_MXC_UART_BASE UART5_BASE
	42	#define CONFIG_CONSOLE_DEV "ttymxc4"
	43
	44	#define CONFIG_CMD_FUSE
	45	#define CONFIG_MXC_OCOTP
	46
	47	/* MMC Configs */
	48	#define CONFIG_FSL_ESDHC
	49	#define CONFIG_FSL_USDHC
	50	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
	51
	52	#define CONFIG_MMC
	53	#define CONFIG_CMD_MMC
	54	#define CONFIG_GENERIC_MMC
	55	#define CONFIG_BOUNCE_BUFFER
	56	#define CONFIG_CMD_EXT2
	57	#define CONFIG_CMD_FAT
	58	#define CONFIG_DOS_PARTITION
	59
	60	#define CONFIG_CMD_PING
	61	#define CONFIG_CMD_DHCP
	62	#define CONFIG_CMD_MII
	63	#define CONFIG_CMD_NET
	64	#define CONFIG_FEC_MXC
	65	#define CONFIG_MII
	66	#define IMX_FEC_BASE ENET_BASE_ADDR
	67	#define CONFIG_FEC_XCV_TYPE RMII
	68	#define CONFIG_ETHPRIME "FEC"
	69	#define CONFIG_FEC_MXC_PHYADDR 0
	70
	71	#define CONFIG_PHYLIB
	72	#define CONFIG_PHY_MICREL
	73
	74	#define CONFIG_CMD_SF
	75	#define CONFIG_SPI_FLASH
	76	#define CONFIG_SPI_FLASH_MTD
	77	#define CONFIG_SPI_FLASH_STMICRO
	78	#define CONFIG_MXC_SPI
	79	#define CONFIG_SF_DEFAULT_BUS 3
2f6bb0a9	80	#define CONFIG_SF_DEFAULT_CS 0
e379c039 HS	81	#define CONFIG_SF_DEFAULT_SPEED 20000000
	82	#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
	83	#define CONFIG_SYS_SPI_ST_ENABLE_WP_PIN
e379c039 HS	84	/* allow to overwrite serial and ethaddr */
	85	#define CONFIG_ENV_OVERWRITE
	86	#define CONFIG_CONS_INDEX 1
	87	#define CONFIG_BAUDRATE 115200
	88
	89	/* Command definition */
	90	#include <config_cmd_default.h>
	91
	92	#define CONFIG_CMD_BMODE
	93	#define CONFIG_CMD_BOOTZ
	94	#define CONFIG_CMD_SETEXPR
	95	#undef CONFIG_CMD_IMLS
	96
	97	#define CONFIG_BOOTDELAY 3
	98
	99	#define CONFIG_LOADADDR 0x12000000
	100	#define CONFIG_SYS_TEXT_BASE 0x17800000
	101
	102	#define CONFIG_EXTRA_ENV_SETTINGS \
b4b39a7e HS	103	"script=u-boot.scr\0" \
	104	"fit_file=/boot/system.itb\0" \
	105	"loadaddr=0x12000000\0" \
	106	"fit_addr_r=0x14000000\0" \
	107	"uboot=/boot/u-boot.imx\0" \
	108	"uboot_sz=d0000\0" \
	109	"rescue_sys_addr=f0000\0" \
	110	"rescue_sys_length=f10000\0" \
	111	"board_type=aristainetos7@1\0" \
	112	"panel=lb07wv8\0" \
	113	"splashpos=m,m\0" \
e379c039 HS	114	"console=" CONFIG_CONSOLE_DEV "\0" \
	115	"fdt_high=0xffffffff\0" \
	116	"initrd_high=0xffffffff\0" \
b4b39a7e HS	117	"mtdids=nand0=gpmi-nand,nor0=spi3.0\0" \
	118	"mtdparts=mtdparts=spi3.0:832k(u-boot),64k(env),64k(env-red)," \
	119	"-(rescue-system);gpmi-nand:-(ubi)\0" \
	120	"addmisc=setenv bootargs ${bootargs} consoleblank=0\0" \
	121	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
	122	"set_fit_default=fdt addr ${fit_addr_r};fdt set /configurations " \
	123	"default ${board_type}\0" \
	124	"get_env=mw ${loadaddr} 0 0x20000;" \
	125	"mmc rescan;" \
	126	"ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} env.txt;" \
	127	"env import -t ${loadaddr}\0" \
	128	"default_env=mw ${loadaddr} 0 0x20000;" \
	129	"env export -t ${loadaddr} serial# ethaddr eth1addr " \
	130	"board_type panel;" \
	131	"env default -a;" \
	132	"env import -t ${loadaddr}\0" \
	133	"loadbootscript=" \
	134	"ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	135	"bootscript=echo Running bootscript from mmc ...; " \
	136	"source\0" \
e379c039	137	"mmcpart=1\0" \
b4b39a7e	138	"mmcdev=0\0" \
e379c039 HS	139	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
	140	"mmcargs=setenv bootargs console=${console},${baudrate} " \
	141	"root=${mmcroot}\0" \
e379c039	142	"mmcboot=echo Booting from mmc ...; " \
b4b39a7e HS	143	"run mmcargs addmtd addmisc set_fit_default;" \
	144	"bootm ${fit_addr_r}\0" \
	145	"mmc_load_fit=ext2load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \
	146	"${fit_file}\0" \
	147	"mmc_load_uboot=ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
	148	"${uboot}\0" \
	149	"mmc_upd_uboot=mw.b ${loadaddr} 0xff ${uboot_sz};" \
	150	"setexpr cmp_buf ${loadaddr} + ${uboot_sz};" \
	151	"setexpr uboot_maxsize ${uboot_sz} - 400;" \
	152	"mw.b ${cmp_buf} 0x00 ${uboot_sz};" \
	153	"run mmc_load_uboot;sf probe;sf erase 0 ${uboot_sz};" \
e379c039	154	"sf write ${loadaddr} 400 ${filesize};" \
b4b39a7e HS	155	"sf read ${cmp_buf} 400 ${uboot_sz};" \
	156	"cmp.b ${loadaddr} ${cmp_buf} ${uboot_maxsize}\0" \
	157	"ubiargs=setenv bootargs console=${console},${baudrate} " \
	158	"ubi.mtd=0,2048 root=ubi0:rootfs rootfstype=ubifs\0 " \
	159	"ubiboot=echo Booting from ubi ...; " \
	160	"run ubiargs addmtd addmisc set_fit_default;" \
	161	"bootm ${fit_addr_r}\0" \
	162	"ubifs_load_fit=sf probe;ubi part ubi 2048;ubifsmount ubi:rootfs;" \
	163	"ubifsload ${fit_addr_r} /boot/system.itb; " \
	164	"imi ${fit_addr_r}\0 " \
	165	"rescueargs=setenv bootargs console=${console},${baudrate} " \
	166	"root=/dev/ram rw\0 " \
	167	"rescueboot=echo Booting rescue system from NOR ...; " \
	168	"run rescueargs addmtd addmisc set_fit_default;" \
	169	"bootm ${fit_addr_r}\0" \
	170	"rescue_load_fit=sf probe;sf read ${fit_addr_r} ${rescue_sys_addr} " \
	171	"${rescue_sys_length}; imi ${fit_addr_r}\0 "
e379c039 HS	172
	173	#define CONFIG_BOOTCOMMAND \
	174	"mmc dev ${mmcdev};" \
	175	"if mmc rescan; then " \
b4b39a7e HS	176	"if run loadbootscript; then " \
	177	"run bootscript; " \
	178	"else " \
	179	"if run mmc_load_fit; then " \
	180	"run mmcboot; " \
	181	"else " \
	182	"if run ubifs_load_fit; then " \
	183	"run ubiboot; " \
	184	"else " \
	185	"if run rescue_load_fit; then " \
	186	"run rescueboot; " \
	187	"else " \
	188	"echo RESCUE SYSTEM BOOT " \
	189	"FAILURE;" \
	190	"fi; " \
	191	"fi; " \
	192	"fi; " \
	193	"fi; " \
	194	"else " \
	195	"if run ubifs_load_fit; then " \
	196	"run ubiboot; " \
	197	"else " \
	198	"if run rescue_load_fit; then " \
	199	"run rescueboot; " \
	200	"else " \
	201	"echo RESCUE SYSTEM BOOT FAILURE;" \
	202	"fi; " \
	203	"fi; " \
	204	"fi"
e379c039 HS	205
	206	#define CONFIG_ARP_TIMEOUT 200UL
	207
	208	/* Miscellaneous configurable options */
	209	#define CONFIG_SYS_LONGHELP
	210	#define CONFIG_SYS_HUSH_PARSER
	211	#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
	212	#define CONFIG_AUTO_COMPLETE
	213	#define CONFIG_SYS_CBSIZE 256
	214
	215	/* Print Buffer Size */
	216	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
	217	#define CONFIG_SYS_MAXARGS 16
	218	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
	219
	220	#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
	221	#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x100000)
	222	#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
	223
	224	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
	225
	226	#define CONFIG_CMDLINE_EDITING
	227	#define CONFIG_STACKSIZE (128 * 1024)
	228
	229	/* Physical Memory Map */
	230	#define CONFIG_NR_DRAM_BANKS 1
	231	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
	232
	233	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	234	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	235	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	236
	237	#define CONFIG_SYS_INIT_SP_OFFSET \
	238	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	239	#define CONFIG_SYS_INIT_SP_ADDR \
	240	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	241
	242	/* FLASH and environment organization */
	243	#define CONFIG_SYS_NO_FLASH
	244
	245	#define CONFIG_ENV_SIZE (12 * 1024)
	246	#define CONFIG_ENV_IS_IN_SPI_FLASH
	247	#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
	248	#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
	249	#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
	250	#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
	251	#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
	252	#define CONFIG_ENV_SECT_SIZE (0x010000)
b4b39a7e HS	253	#define CONFIG_ENV_OFFSET (0x0d0000)
b4b39a7e HS	254	#define CONFIG_ENV_OFFSET_REDUND (0x0e0000)
e379c039 HS	255
	256	#define CONFIG_OF_LIBFDT
	257
	258	#define CONFIG_CMD_CACHE
	259
	260	#define CONFIG_SYS_FSL_USDHC_NUM 2
	261
	262	#define CONFIG_CMD_I2C
	263	#define CONFIG_SYS_I2C
	264	#define CONFIG_SYS_I2C_MXC
	265	#define CONFIG_SYS_I2C_SPEED 100000
	266	#define CONFIG_SYS_I2C_SLAVE 0x7f
	267	#define CONFIG_SYS_I2C_NOPROBES { {0, 0x00} }
	268
	269	#define CONFIG_CMD_GPIO
	270	#define CONFIG_GPIO_ENABLE_SPI_FLASH IMX_GPIO_NR(2, 15)
	271
	272	/* NAND stuff */
	273	#define CONFIG_CMD_NAND
	274	#define CONFIG_CMD_NAND_TRIMFFS
	275	#define CONFIG_NAND_MXS
	276	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	277	#define CONFIG_SYS_NAND_BASE 0x40000000
	278	#define CONFIG_SYS_NAND_5_ADDR_CYCLE
	279	#define CONFIG_SYS_NAND_ONFI_DETECTION
	280
	281	/* DMA stuff, needed for GPMI/MXS NAND support */
	282	#define CONFIG_APBH_DMA
	283	#define CONFIG_APBH_DMA_BURST
	284	#define CONFIG_APBH_DMA_BURST8
	285
	286	/* RTC */
	287	#define CONFIG_SYS_I2C_RTC_ADDR 0x68
	288	#define CONFIG_SYS_RTC_BUS_NUM 2
	289	#define CONFIG_RTC_M41T11
	290	#define CONFIG_CMD_DATE
	291
	292	/* USB Configs */
	293	#define CONFIG_CMD_USB
	294	#define CONFIG_CMD_FAT
	295	#define CONFIG_USB_EHCI
	296	#define CONFIG_USB_EHCI_MX6
	297	#define CONFIG_USB_STORAGE
	298	#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
	299	#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
	300	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
	301	#define CONFIG_MXC_USB_FLAGS 0
	302
	303	#define ARISTAINETOS_USB_OTG_PWR IMX_GPIO_NR(4, 15)
	304	#define ARISTAINETOS_USB_H1_PWR IMX_GPIO_NR(3, 31)
	305
	306	/* UBI support */
	307	#define CONFIG_CMD_MTDPARTS
	308	#define CONFIG_MTD_PARTITIONS
	309	#define CONFIG_MTD_DEVICE
	310	#define CONFIG_RBTREE
	311	#define CONFIG_LZO
	312	#define CONFIG_CMD_UBI
	313	#define CONFIG_CMD_UBIFS
	314
e379c039 HS	315	#define CONFIG_MTD_UBI_FASTMAP
	316	#define CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT 1
	317
	318	#define CONFIG_HW_WATCHDOG
	319	#define CONFIG_IMX_WATCHDOG
	320
	321	#define CONFIG_FIT
	322
	323	/* Framebuffer */
	324	#define CONFIG_VIDEO
	325	#define CONFIG_VIDEO_IPUV3
	326	/* check this console not needed, after test remove it */
	327	#define CONFIG_CFB_CONSOLE
	328	#define CONFIG_VGA_AS_SINGLE_DEVICE
	329	#define CONFIG_SYS_CONSOLE_IS_IN_ENV
	330	#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
	331	#define CONFIG_VIDEO_BMP_RLE8
	332	#define CONFIG_SPLASH_SCREEN
	333	#define CONFIG_SPLASH_SCREEN_ALIGN
	334	#define CONFIG_BMP_16BPP
	335	#define CONFIG_VIDEO_LOGO
	336	#define CONFIG_VIDEO_BMP_LOGO
	337	#define CONFIG_IPUV3_CLK 198000000
	338	#define CONFIG_IMX_VIDEO_SKIP
	339
	340	#define CONFIG_CMD_BMP
	341
	342	#define CONFIG_PWM_IMX
	343	#define CONFIG_IMX6_PWM_PER_CLK 66000000
e379c039	344	#endif /* __ARISTAINETOS_CONFIG_H */