[people/ms/u-boot.git] / include / configs / at91sam9261ek.h

/*
 * (C) Copyright 2007-2008
 * Stelian Pop <stelian@popies.net>
 * Lead Tech Design <www.leadtechdesign.com>
 *
 * Configuation settings for the AT91SAM9261EK board.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/* ARM asynchronous clock */
#define CONFIG_SYS_AT91_SLOW_CLOCK	32768		/* slow clock xtal */
#define CONFIG_SYS_AT91_MAIN_CLOCK	18432000	/* 18.432 MHz crystal */
#define CONFIG_SYS_HZ			1000

#ifdef CONFIG_AT91SAM9G10
#define CONFIG_AT91SAM9G10EK		/* It's an Atmel AT91SAM9G10 EK*/
#else
#define CONFIG_AT91SAM9261EK		/* It's an Atmel AT91SAM9261 EK*/
#endif

#include <asm/hardware.h>

#define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG

#define CONFIG_SKIP_LOWLEVEL_INIT

#define CONFIG_DISPLAY_CPUINFO

#define CONFIG_OF_LIBFDT

#define CONFIG_ATMEL_LEGACY
#define CONFIG_SYS_TEXT_BASE		0x21f00000

/*
 * Hardware drivers
 */

/* gpio */
#define CONFIG_AT91_GPIO
#define CONFIG_AT91_GPIO_PULLUP		1

/* serial console */
#define CONFIG_ATMEL_USART
#define CONFIG_USART_BASE		ATMEL_BASE_DBGU
#define CONFIG_USART_ID			ATMEL_ID_SYS
#define CONFIG_BAUDRATE			115200

/* LCD */
#define CONFIG_LCD
#define LCD_BPP				LCD_COLOR8
#define CONFIG_LCD_LOGO
#undef LCD_TEST_PATTERN
#define CONFIG_LCD_INFO
#define CONFIG_LCD_INFO_BELOW_LOGO
#define CONFIG_SYS_WHITE_ON_BLACK
#define CONFIG_ATMEL_LCD
#ifdef CONFIG_AT91SAM9261EK
#define CONFIG_ATMEL_LCD_BGR555
#endif

#define CONFIG_SYS_CONSOLE_IS_IN_ENV

/* LED */
#define CONFIG_AT91_LED
#define	CONFIG_RED_LED		AT91_PIN_PA23	/* this is the power led */
#define	CONFIG_GREEN_LED	AT91_PIN_PA13	/* this is the user1 led */
#define	CONFIG_YELLOW_LED	AT91_PIN_PA14	/* this is the user2 led */

#define CONFIG_BOOTDELAY	3

/*
 * BOOTP options
 */
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME

/*
 * Command line configuration.
 */
#include <config_cmd_default.h>
#undef CONFIG_CMD_BDI
#undef CONFIG_CMD_FPGA
#undef CONFIG_CMD_IMI
#undef CONFIG_CMD_IMLS
#undef CONFIG_CMD_LOADS
#undef CONFIG_CMD_SOURCE

#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_NAND
#define CONFIG_CMD_USB

/* SDRAM */
#define CONFIG_NR_DRAM_BANKS		1
#define CONFIG_SYS_SDRAM_BASE		0x20000000
#define CONFIG_SYS_SDRAM_SIZE		0x04000000
#define CONFIG_SYS_INIT_SP_ADDR \
	(ATMEL_BASE_SRAM + 0x1000 - GENERATED_GBL_DATA_SIZE)

/* DataFlash */
#define CONFIG_ATMEL_DATAFLASH_SPI
#define CONFIG_HAS_DATAFLASH
#define CONFIG_SYS_SPI_WRITE_TOUT		(5*CONFIG_SYS_HZ)
#define CONFIG_SYS_MAX_DATAFLASH_BANKS		2
#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000	/* CS0 */
#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3	0xD0000000	/* CS3 */
#define AT91_SPI_CLK				15000000
#define DATAFLASH_TCSS				(0x1a << 16)
#define DATAFLASH_TCHS				(0x1 << 24)

/* NAND flash */
#ifdef CONFIG_CMD_NAND
#define CONFIG_NAND_ATMEL
#define CONFIG_SYS_MAX_NAND_DEVICE		1
#define CONFIG_SYS_NAND_BASE			0x40000000
#define CONFIG_SYS_NAND_DBW_8
/* our ALE is AD22 */
#define CONFIG_SYS_NAND_MASK_ALE		(1 << 22)
/* our CLE is AD21 */
#define CONFIG_SYS_NAND_MASK_CLE		(1 << 21)
#define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIN_PC14
#define CONFIG_SYS_NAND_READY_PIN		AT91_PIN_PC15

#endif

/* NOR flash - no real flash on this board */
#define CONFIG_SYS_NO_FLASH

/* Ethernet */
#define CONFIG_DRIVER_DM9000
#define CONFIG_DM9000_BASE		0x30000000
#define DM9000_IO			CONFIG_DM9000_BASE
#define DM9000_DATA			(CONFIG_DM9000_BASE + 4)
#define CONFIG_DM9000_USE_16BIT
#define CONFIG_DM9000_NO_SROM
#define CONFIG_NET_RETRY_COUNT		20
#define CONFIG_RESET_PHY_R

/* USB */
#define CONFIG_USB_ATMEL
#define CONFIG_USB_OHCI_NEW
#define CONFIG_DOS_PARTITION
#define CONFIG_SYS_USB_OHCI_CPU_INIT
#define CONFIG_SYS_USB_OHCI_REGS_BASE		0x00500000	/* AT91SAM9261_UHP_BASE */
#ifdef CONFIG_AT91SAM9G10EK
#define CONFIG_SYS_USB_OHCI_SLOT_NAME		"at91sam9g10"
#else
#define CONFIG_SYS_USB_OHCI_SLOT_NAME		"at91sam9261"
#endif
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	2
#define CONFIG_USB_STORAGE
#define CONFIG_CMD_FAT

#define CONFIG_SYS_LOAD_ADDR			0x22000000	/* load address */

#define CONFIG_SYS_MEMTEST_START		CONFIG_SYS_SDRAM_BASE
#define CONFIG_SYS_MEMTEST_END			0x23e00000

#ifdef CONFIG_SYS_USE_DATAFLASH_CS0

/* bootstrap + u-boot + env + linux in dataflash on CS0 */
#define CONFIG_ENV_IS_IN_DATAFLASH
#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
#define CONFIG_ENV_OFFSET	0x4200
#define CONFIG_ENV_ADDR		(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
#define CONFIG_ENV_SIZE		0x4200
#define CONFIG_BOOTCOMMAND	"cp.b 0xC0084000 0x22000000 0x210000; bootm"
#define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
				"root=/dev/mtdblock0 "			\
				"mtdparts=atmel_nand:-(root) "		\
				"rw rootfstype=jffs2"

#elif CONFIG_SYS_USE_DATAFLASH_CS3

/* bootstrap + u-boot + env + linux in dataflash on CS3 */
#define CONFIG_ENV_IS_IN_DATAFLASH
#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 + 0x8400)
#define CONFIG_ENV_OFFSET	0x4200
#define CONFIG_ENV_ADDR		(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 + CONFIG_ENV_OFFSET)
#define CONFIG_ENV_SIZE		0x4200
#define CONFIG_BOOTCOMMAND	"cp.b 0xD0084000 0x22000000 0x210000; bootm"
#define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
				"root=/dev/mtdblock0 "			\
				"mtdparts=atmel_nand:-(root) "		\
				"rw rootfstype=jffs2"

#else /* CONFIG_SYS_USE_NANDFLASH */

/* bootstrap + u-boot + env + linux in nandflash */
#define CONFIG_ENV_IS_IN_NAND
#define CONFIG_ENV_OFFSET		0xc0000
#define CONFIG_ENV_OFFSET_REDUND	0x100000
#define CONFIG_ENV_SIZE		0x20000		/* 1 sector = 128 kB */
#define CONFIG_BOOTCOMMAND	"nand read 0x22000000 0x200000 0x300000; bootm"
#define CONFIG_BOOTARGS							\
	"console=ttyS0,115200 earlyprintk "				\
	"mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,"		\
	"256k(env),256k(env_redundant),256k(spare),"			\
	"512k(dtb),6M(kernel)ro,-(rootfs) "				\
	"root=/dev/mtdblock7 rw rootfstype=jffs2"
#endif

#define CONFIG_SYS_PROMPT		"U-Boot> "
#define CONFIG_SYS_CBSIZE		256
#define CONFIG_SYS_MAXARGS		16
#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_LONGHELP
#define CONFIG_CMDLINE_EDITING
#define CONFIG_AUTO_COMPLETE

/*
 * Size of malloc() pool
 */
#define CONFIG_SYS_MALLOC_LEN		ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)

#endif
Commit	Line	Data
d99a8ff6 SP	1	/*
d99a8ff6 SP	2	* (C) Copyright 2007-2008
c9e798d3	3	* Stelian Pop <stelian@popies.net>
d99a8ff6 SP	4	* Lead Tech Design <www.leadtechdesign.com>
	5	*
	6	* Configuation settings for the AT91SAM9261EK board.
	7	*
1a459660	8	* SPDX-License-Identifier: GPL-2.0+
d99a8ff6 SP	9	*/
	10
	11	#ifndef __CONFIG_H
	12	#define __CONFIG_H
	13
	14	/* ARM asynchronous clock */
f7aea46d	15	#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */
7c966a8b	16	#define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* 18.432 MHz crystal */
f7aea46d	17	#define CONFIG_SYS_HZ 1000
d99a8ff6	18
f7aea46d XH	19	#ifdef CONFIG_AT91SAM9G10
f7aea46d XH	20	#define CONFIG_AT91SAM9G10EK /* It's an Atmel AT91SAM9G10 EK*/
5ccc2d99	21	#else
f7aea46d	22	#define CONFIG_AT91SAM9261EK /* It's an Atmel AT91SAM9261 EK*/
5ccc2d99	23	#endif
f7aea46d XH	24
	25	#include <asm/hardware.h>
	26
f7aea46d XH	27	#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
	28	#define CONFIG_SETUP_MEMORY_TAGS
	29	#define CONFIG_INITRD_TAG
d99a8ff6 SP	30
d99a8ff6 SP	31	#define CONFIG_SKIP_LOWLEVEL_INIT
d99a8ff6	32
f7aea46d XH	33	#define CONFIG_DISPLAY_CPUINFO
f7aea46d XH	34
dc3e30ba BS	35	#define CONFIG_OF_LIBFDT
dc3e30ba BS	36
f7aea46d XH	37	#define CONFIG_ATMEL_LEGACY
	38	#define CONFIG_SYS_TEXT_BASE 0x21f00000
	39
d99a8ff6 SP	40	/*
	41	* Hardware drivers
	42	*/
f7aea46d XH	43
	44	/* gpio */
	45	#define CONFIG_AT91_GPIO
	46	#define CONFIG_AT91_GPIO_PULLUP 1
	47
	48	/* serial console */
	49	#define CONFIG_ATMEL_USART
	50	#define CONFIG_USART_BASE ATMEL_BASE_DBGU
	51	#define CONFIG_USART_ID ATMEL_ID_SYS
	52	#define CONFIG_BAUDRATE 115200
d99a8ff6	53
820f2a95	54	/* LCD */
f7aea46d	55	#define CONFIG_LCD
820f2a95	56	#define LCD_BPP LCD_COLOR8
f7aea46d	57	#define CONFIG_LCD_LOGO
820f2a95	58	#undef LCD_TEST_PATTERN
f7aea46d XH	59	#define CONFIG_LCD_INFO
	60	#define CONFIG_LCD_INFO_BELOW_LOGO
	61	#define CONFIG_SYS_WHITE_ON_BLACK
	62	#define CONFIG_ATMEL_LCD
5ccc2d99	63	#ifdef CONFIG_AT91SAM9261EK
f7aea46d	64	#define CONFIG_ATMEL_LCD_BGR555
5ccc2d99	65	#endif
f7aea46d XH	66
f7aea46d XH	67	#define CONFIG_SYS_CONSOLE_IS_IN_ENV
820f2a95	68
a484b00b JCPV	69	/* LED */
	70	#define CONFIG_AT91_LED
	71	#define CONFIG_RED_LED AT91_PIN_PA23 /* this is the power led */
	72	#define CONFIG_GREEN_LED AT91_PIN_PA13 /* this is the user1 led */
	73	#define CONFIG_YELLOW_LED AT91_PIN_PA14 /* this is the user2 led */
	74
d99a8ff6 SP	75	#define CONFIG_BOOTDELAY 3
d99a8ff6 SP	76
d99a8ff6 SP	77	/*
	78	* BOOTP options
	79	*/
f7aea46d XH	80	#define CONFIG_BOOTP_BOOTFILESIZE
	81	#define CONFIG_BOOTP_BOOTPATH
	82	#define CONFIG_BOOTP_GATEWAY
	83	#define CONFIG_BOOTP_HOSTNAME
d99a8ff6 SP	84
	85	/*
	86	* Command line configuration.
	87	*/
	88	#include <config_cmd_default.h>
	89	#undef CONFIG_CMD_BDI
d99a8ff6	90	#undef CONFIG_CMD_FPGA
74de7aef	91	#undef CONFIG_CMD_IMI
d99a8ff6	92	#undef CONFIG_CMD_IMLS
74de7aef WD	93	#undef CONFIG_CMD_LOADS
74de7aef WD	94	#undef CONFIG_CMD_SOURCE
d99a8ff6	95
f7aea46d XH	96	#define CONFIG_CMD_PING
	97	#define CONFIG_CMD_DHCP
	98	#define CONFIG_CMD_NAND
	99	#define CONFIG_CMD_USB
d99a8ff6 SP	100
	101	/* SDRAM */
	102	#define CONFIG_NR_DRAM_BANKS 1
f7aea46d XH	103	#define CONFIG_SYS_SDRAM_BASE 0x20000000
	104	#define CONFIG_SYS_SDRAM_SIZE 0x04000000
	105	#define CONFIG_SYS_INIT_SP_ADDR \
	106	(ATMEL_BASE_SRAM + 0x1000 - GENERATED_GBL_DATA_SIZE)
d99a8ff6 SP	107
d99a8ff6 SP	108	/* DataFlash */
4758ebdd	109	#define CONFIG_ATMEL_DATAFLASH_SPI
f7aea46d	110	#define CONFIG_HAS_DATAFLASH
6d0f6bcf JCPV	111	#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ)
	112	#define CONFIG_SYS_MAX_DATAFLASH_BANKS 2
	113	#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */
	114	#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 0xD0000000 /* CS3 */
f7aea46d XH	115	#define AT91_SPI_CLK 15000000
	116	#define DATAFLASH_TCSS (0x1a << 16)
	117	#define DATAFLASH_TCHS (0x1 << 24)
d99a8ff6 SP	118
d99a8ff6 SP	119	/* NAND flash */
74c076d6 JCPV	120	#ifdef CONFIG_CMD_NAND
74c076d6 JCPV	121	#define CONFIG_NAND_ATMEL
6d0f6bcf JCPV	122	#define CONFIG_SYS_MAX_NAND_DEVICE 1
6d0f6bcf JCPV	123	#define CONFIG_SYS_NAND_BASE 0x40000000
f7aea46d	124	#define CONFIG_SYS_NAND_DBW_8
74c076d6 JCPV	125	/* our ALE is AD22 */
	126	#define CONFIG_SYS_NAND_MASK_ALE (1 << 22)
	127	/* our CLE is AD21 */
	128	#define CONFIG_SYS_NAND_MASK_CLE (1 << 21)
	129	#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14
	130	#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC15
2eb99ca8	131
74c076d6	132	#endif
d99a8ff6 SP	133
d99a8ff6 SP	134	/* NOR flash - no real flash on this board */
f7aea46d	135	#define CONFIG_SYS_NO_FLASH
d99a8ff6 SP	136
d99a8ff6 SP	137	/* Ethernet */
f7aea46d	138	#define CONFIG_DRIVER_DM9000
d99a8ff6 SP	139	#define CONFIG_DM9000_BASE 0x30000000
	140	#define DM9000_IO CONFIG_DM9000_BASE
	141	#define DM9000_DATA (CONFIG_DM9000_BASE + 4)
f7aea46d XH	142	#define CONFIG_DM9000_USE_16BIT
f7aea46d XH	143	#define CONFIG_DM9000_NO_SROM
d99a8ff6	144	#define CONFIG_NET_RETRY_COUNT 20
f7aea46d	145	#define CONFIG_RESET_PHY_R
d99a8ff6 SP	146
d99a8ff6 SP	147	/* USB */
2b7178af	148	#define CONFIG_USB_ATMEL
f7aea46d XH	149	#define CONFIG_USB_OHCI_NEW
	150	#define CONFIG_DOS_PARTITION
	151	#define CONFIG_SYS_USB_OHCI_CPU_INIT
6d0f6bcf	152	#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 /* AT91SAM9261_UHP_BASE */
5ccc2d99 SG	153	#ifdef CONFIG_AT91SAM9G10EK
	154	#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9g10"
	155	#else
6d0f6bcf	156	#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9261"
5ccc2d99	157	#endif
6d0f6bcf	158	#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
f7aea46d XH	159	#define CONFIG_USB_STORAGE
f7aea46d XH	160	#define CONFIG_CMD_FAT
d99a8ff6	161
6d0f6bcf	162	#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
d99a8ff6	163
f7aea46d	164	#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
6d0f6bcf	165	#define CONFIG_SYS_MEMTEST_END 0x23e00000
d99a8ff6	166
6d0f6bcf	167	#ifdef CONFIG_SYS_USE_DATAFLASH_CS0
d99a8ff6 SP	168
d99a8ff6 SP	169	/* bootstrap + u-boot + env + linux in dataflash on CS0 */
f7aea46d	170	#define CONFIG_ENV_IS_IN_DATAFLASH
6d0f6bcf	171	#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
89a7a87f	172	#define CONFIG_ENV_OFFSET 0x4200
6d0f6bcf	173	#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
0e8d1586	174	#define CONFIG_ENV_SIZE 0x4200
e139cb31	175	#define CONFIG_BOOTCOMMAND "cp.b 0xC0084000 0x22000000 0x210000; bootm"
d99a8ff6 SP	176	#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
d99a8ff6 SP	177	"root=/dev/mtdblock0 " \
918319c7	178	"mtdparts=atmel_nand:-(root) " \
d99a8ff6 SP	179	"rw rootfstype=jffs2"
d99a8ff6 SP	180
89a7a87f NF	181	#elif CONFIG_SYS_USE_DATAFLASH_CS3
	182
	183	/* bootstrap + u-boot + env + linux in dataflash on CS3 */
f7aea46d	184	#define CONFIG_ENV_IS_IN_DATAFLASH
89a7a87f NF	185	#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 + 0x8400)
	186	#define CONFIG_ENV_OFFSET 0x4200
	187	#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 + CONFIG_ENV_OFFSET)
	188	#define CONFIG_ENV_SIZE 0x4200
e139cb31	189	#define CONFIG_BOOTCOMMAND "cp.b 0xD0084000 0x22000000 0x210000; bootm"
89a7a87f NF	190	#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
89a7a87f NF	191	"root=/dev/mtdblock0 " \
918319c7	192	"mtdparts=atmel_nand:-(root) " \
89a7a87f NF	193	"rw rootfstype=jffs2"
89a7a87f NF	194
6d0f6bcf	195	#else /* CONFIG_SYS_USE_NANDFLASH */
d99a8ff6 SP	196
d99a8ff6 SP	197	/* bootstrap + u-boot + env + linux in nandflash */
f7aea46d	198	#define CONFIG_ENV_IS_IN_NAND
0c58cfa9 BS	199	#define CONFIG_ENV_OFFSET 0xc0000
0c58cfa9 BS	200	#define CONFIG_ENV_OFFSET_REDUND 0x100000
0e8d1586	201	#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */
0c58cfa9 BS	202	#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0x200000 0x300000; bootm"
	203	#define CONFIG_BOOTARGS \
	204	"console=ttyS0,115200 earlyprintk " \
	205	"mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \
	206	"256k(env),256k(env_redundant),256k(spare)," \
	207	"512k(dtb),6M(kernel)ro,-(rootfs) " \
	208	"root=/dev/mtdblock7 rw rootfstype=jffs2"
d99a8ff6 SP	209	#endif
d99a8ff6 SP	210
6d0f6bcf JCPV	211	#define CONFIG_SYS_PROMPT "U-Boot> "
	212	#define CONFIG_SYS_CBSIZE 256
	213	#define CONFIG_SYS_MAXARGS 16
	214	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
f7aea46d XH	215	#define CONFIG_SYS_LONGHELP
f7aea46d XH	216	#define CONFIG_CMDLINE_EDITING
e139cb31	217	#define CONFIG_AUTO_COMPLETE
d99a8ff6	218
d99a8ff6 SP	219	/*
	220	* Size of malloc() pool
	221	*/
6d0f6bcf	222	#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
d99a8ff6	223
d99a8ff6	224	#endif