[people/ms/u-boot.git] / include / configs / at91sam9m10g45ek.h

/*
 * (C) Copyright 2007-2008
 * Stelian Pop <stelian@popies.net>
 * Lead Tech Design <www.leadtechdesign.com>
 *
 * Configuation settings for the AT91SAM9M10G45EK board(and AT91SAM9G45EKES).
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#include <asm/hardware.h>

#define CONFIG_SYS_TEXT_BASE		0x73f00000

#define CONFIG_ATMEL_LEGACY		/* required until (g)pio is fixed */

/* ARM asynchronous clock */
#define CONFIG_SYS_AT91_SLOW_CLOCK      32768
#define CONFIG_SYS_AT91_MAIN_CLOCK      12000000 /* from 12 MHz crystal */

#define CONFIG_AT91SAM9M10G45EK

#define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs	*/
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_DISPLAY_CPUINFO

#define CONFIG_CMD_BOOTZ

/* general purpose I/O */
#define CONFIG_ATMEL_LEGACY		/* required until (g)pio is fixed */
#define CONFIG_AT91_GPIO
#define CONFIG_AT91_GPIO_PULLUP	1	/* keep pullups on peripheral pins */

/* serial console */
#define CONFIG_ATMEL_USART
#define CONFIG_USART_BASE		ATMEL_BASE_DBGU
#define	CONFIG_USART_ID			ATMEL_ID_SYS

/* LCD */
#define CONFIG_LCD
#define LCD_BPP				LCD_COLOR8
#define CONFIG_LCD_LOGO
#undef LCD_TEST_PATTERN
#define CONFIG_LCD_INFO
#define CONFIG_LCD_INFO_BELOW_LOGO
#define CONFIG_SYS_WHITE_ON_BLACK
#define CONFIG_ATMEL_LCD
#define CONFIG_ATMEL_LCD_RGB565
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
/* board specific(not enough SRAM) */
#define CONFIG_AT91SAM9G45_LCD_BASE		0x73E00000

/* LED */
#define CONFIG_AT91_LED
#define	CONFIG_RED_LED		AT91_PIN_PD31	/* this is the user1 led */
#define	CONFIG_GREEN_LED	AT91_PIN_PD0	/* this is the user2 led */

#define CONFIG_BOOTDELAY	3

/*
 * BOOTP options
 */
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME

/*
 * Command line configuration.
 */

/* No NOR flash */
#define CONFIG_SYS_NO_FLASH
#define CONFIG_CMD_NAND

/* SDRAM */
#define CONFIG_NR_DRAM_BANKS		1
#define CONFIG_SYS_SDRAM_BASE           ATMEL_BASE_CS6
#define CONFIG_SYS_SDRAM_SIZE		0x08000000

#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)

/* NAND flash */
#ifdef CONFIG_CMD_NAND
#define CONFIG_NAND_ATMEL
#define CONFIG_SYS_MAX_NAND_DEVICE		1
#define CONFIG_SYS_NAND_BASE			ATMEL_BASE_CS3
#define CONFIG_SYS_NAND_DBW_8
/* our ALE is AD21 */
#define CONFIG_SYS_NAND_MASK_ALE		(1 << 21)
/* our CLE is AD22 */
#define CONFIG_SYS_NAND_MASK_CLE		(1 << 22)
#define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIN_PC14
#define CONFIG_SYS_NAND_READY_PIN		AT91_PIN_PC8

#endif

/* MMC */
#define CONFIG_CMD_MMC

#ifdef CONFIG_CMD_MMC
#define CONFIG_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_GENERIC_ATMEL_MCI
#endif

#if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC)
#define CONFIG_CMD_FAT
#define CONFIG_DOS_PARTITION
#endif

/* Ethernet */
#define CONFIG_MACB
#define CONFIG_RMII
#define CONFIG_NET_RETRY_COUNT		20
#define CONFIG_RESET_PHY_R
#define CONFIG_AT91_WANTS_COMMON_PHY

/* USB */
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_ATMEL
#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS	2
#define CONFIG_USB_STORAGE

#define CONFIG_SYS_LOAD_ADDR		0x22000000	/* load address */

#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
#define CONFIG_SYS_MEMTEST_END		0x23e00000

#ifdef CONFIG_SYS_USE_NANDFLASH
/* bootstrap + u-boot + env in nandflash */
#define CONFIG_ENV_IS_IN_NAND
#define CONFIG_ENV_OFFSET		0xc0000
#define CONFIG_ENV_OFFSET_REDUND	0x100000
#define CONFIG_ENV_SIZE			0x20000

#define CONFIG_BOOTCOMMAND						\
	"nand read 0x70000000 0x200000 0x300000;"			\
	"bootm 0x70000000"
#define CONFIG_BOOTARGS							\
	"console=ttyS0,115200 earlyprintk "				\
	"mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,"		\
	"256k(env),256k(env_redundant),256k(spare),"			\
	"512k(dtb),6M(kernel)ro,-(rootfs) "				\
	"root=/dev/mtdblock7 rw rootfstype=jffs2"
#elif CONFIG_SYS_USE_MMC
/* bootstrap + u-boot + env + linux in mmc */
#define FAT_ENV_INTERFACE	"mmc"
/*
 * We don't specify the part number, if device 0 has partition table, it means
 * the first partition; it no partition table, then take whole device as a
 * FAT file system.
 */
#define FAT_ENV_DEVICE_AND_PART	"0"
#define FAT_ENV_FILE		"uboot.env"
#define CONFIG_ENV_IS_IN_FAT
#define CONFIG_FAT_WRITE
#define CONFIG_ENV_SIZE		0x4000

#define CONFIG_BOOTARGS		"console=ttyS0,115200 " \
				"mtdparts=atmel_nand:" \
				"8M(bootstrap/uboot/kernel)ro,-(rootfs) " \
				"root=/dev/mmcblk0p2 rw rootwait"
#define CONFIG_BOOTCOMMAND	"fatload mmc 0:1 0x71000000 dtb; " \
				"fatload mmc 0:1 0x72000000 zImage; " \
				"bootz 0x72000000 - 0x71000000"
#endif

#define CONFIG_BAUDRATE			115200

#define CONFIG_SYS_CBSIZE		256
#define CONFIG_SYS_MAXARGS		16
#define CONFIG_SYS_LONGHELP
#define CONFIG_CMDLINE_EDITING
#define CONFIG_AUTO_COMPLETE

/*
 * Size of malloc() pool
 */
#define CONFIG_SYS_MALLOC_LEN		ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)

/* Defines for SPL */
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_TEXT_BASE		0x300000
#define CONFIG_SPL_MAX_SIZE		0x010000
#define CONFIG_SPL_STACK		0x310000

#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_SERIAL_SUPPORT
#define CONFIG_SPL_GPIO_SUPPORT

#define CONFIG_SYS_MONITOR_LEN		0x80000

#ifdef CONFIG_SYS_USE_MMC

#define CONFIG_SPL_BSS_START_ADDR	0x70000000
#define CONFIG_SPL_BSS_MAX_SIZE		0x00080000
#define CONFIG_SYS_SPL_MALLOC_START	0x70080000
#define CONFIG_SYS_SPL_MALLOC_SIZE	0x00080000

#define CONFIG_SPL_LDSCRIPT		arch/arm/mach-at91/arm926ejs/u-boot-spl.lds
#define CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x400
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200
#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME		"u-boot.img"
#define CONFIG_SPL_FAT_SUPPORT
#define CONFIG_SPL_LIBDISK_SUPPORT

#elif CONFIG_SYS_USE_NANDFLASH
#define CONFIG_SPL_NAND_SUPPORT
#define CONFIG_SPL_NAND_DRIVERS
#define CONFIG_SPL_NAND_BASE
#define CONFIG_SPL_NAND_ECC
#define CONFIG_SPL_NAND_SOFTECC
#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x40000
#define CONFIG_SYS_NAND_U_BOOT_SIZE	0x80000
#define CONFIG_SYS_NAND_5_ADDR_CYCLE

#define CONFIG_SYS_NAND_PAGE_SIZE	0x800
#define CONFIG_SYS_NAND_BLOCK_SIZE	0x20000
#define CONFIG_SYS_NAND_PAGE_COUNT	64
#define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
#define CONFIG_SYS_NAND_ECCSIZE		256
#define CONFIG_SYS_NAND_ECCBYTES	3
#define CONFIG_SYS_NAND_OOBSIZE		64
#define CONFIG_SYS_NAND_ECCPOS		{ 40, 41, 42, 43, 44, 45, 46, 47, \
					  48, 49, 50, 51, 52, 53, 54, 55, \
					  56, 57, 58, 59, 60, 61, 62, 63, }
#endif

#define CONFIG_SPL_ATMEL_SIZE
#define CONFIG_SYS_MASTER_CLOCK		132096000
#define CONFIG_SYS_AT91_PLLA		0x20c73f03
#define CONFIG_SYS_MCKR			0x1301
#define CONFIG_SYS_MCKR_CSS		0x1302

#endif
Commit	Line	Data
22ee6473 SG	1	/*
22ee6473 SG	2	* (C) Copyright 2007-2008
c9e798d3	3	* Stelian Pop <stelian@popies.net>
22ee6473 SG	4	* Lead Tech Design <www.leadtechdesign.com>
	5	*
	6	* Configuation settings for the AT91SAM9M10G45EK board(and AT91SAM9G45EKES).
	7	*
1a459660	8	* SPDX-License-Identifier: GPL-2.0+
22ee6473 SG	9	*/
	10
	11	#ifndef __CONFIG_H
	12	#define __CONFIG_H
	13
5cfeec51 TP	14	#include <asm/hardware.h>
5cfeec51 TP	15
77461a65 BS	16	#define CONFIG_SYS_TEXT_BASE 0x73f00000
77461a65 BS	17
5cfeec51	18	#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */
425de62d	19
22ee6473	20	/* ARM asynchronous clock */
5cfeec51 TP	21	#define CONFIG_SYS_AT91_SLOW_CLOCK 32768
5cfeec51 TP	22	#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */
5cfeec51 TP	23
5cfeec51 TP	24	#define CONFIG_AT91SAM9M10G45EK
22ee6473	25
5cfeec51 TP	26	#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
	27	#define CONFIG_SETUP_MEMORY_TAGS
	28	#define CONFIG_INITRD_TAG
22ee6473	29	#define CONFIG_SKIP_LOWLEVEL_INIT
5cfeec51 TP	30	#define CONFIG_BOARD_EARLY_INIT_F
	31	#define CONFIG_DISPLAY_CPUINFO
	32
f9129fe3	33	#define CONFIG_CMD_BOOTZ
68f16477	34
5cfeec51 TP	35	/* general purpose I/O */
	36	#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */
	37	#define CONFIG_AT91_GPIO
	38	#define CONFIG_AT91_GPIO_PULLUP 1 /* keep pullups on peripheral pins */
	39
	40	/* serial console */
	41	#define CONFIG_ATMEL_USART
	42	#define CONFIG_USART_BASE ATMEL_BASE_DBGU
	43	#define CONFIG_USART_ID ATMEL_ID_SYS
	44
22ee6473	45	/* LCD */
5cfeec51	46	#define CONFIG_LCD
22ee6473	47	#define LCD_BPP LCD_COLOR8
5cfeec51	48	#define CONFIG_LCD_LOGO
22ee6473	49	#undef LCD_TEST_PATTERN
5cfeec51 TP	50	#define CONFIG_LCD_INFO
	51	#define CONFIG_LCD_INFO_BELOW_LOGO
	52	#define CONFIG_SYS_WHITE_ON_BLACK
	53	#define CONFIG_ATMEL_LCD
	54	#define CONFIG_ATMEL_LCD_RGB565
	55	#define CONFIG_SYS_CONSOLE_IS_IN_ENV
22ee6473 SG	56	/* board specific(not enough SRAM) */
	57	#define CONFIG_AT91SAM9G45_LCD_BASE 0x73E00000
	58
	59	/* LED */
	60	#define CONFIG_AT91_LED
	61	#define CONFIG_RED_LED AT91_PIN_PD31 /* this is the user1 led */
	62	#define CONFIG_GREEN_LED AT91_PIN_PD0 /* this is the user2 led */
	63
	64	#define CONFIG_BOOTDELAY 3
	65
	66	/*
	67	* BOOTP options
	68	*/
5cfeec51 TP	69	#define CONFIG_BOOTP_BOOTFILESIZE
	70	#define CONFIG_BOOTP_BOOTPATH
	71	#define CONFIG_BOOTP_GATEWAY
	72	#define CONFIG_BOOTP_HOSTNAME
22ee6473 SG	73
	74	/*
	75	* Command line configuration.
	76	*/
782358fb BS	77
	78	/* No NOR flash */
	79	#define CONFIG_SYS_NO_FLASH
5cfeec51	80	#define CONFIG_CMD_NAND
22ee6473 SG	81
	82	/* SDRAM */
	83	#define CONFIG_NR_DRAM_BANKS 1
5cfeec51 TP	84	#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS6
5cfeec51 TP	85	#define CONFIG_SYS_SDRAM_SIZE 0x08000000
22ee6473	86
5cfeec51 TP	87	#define CONFIG_SYS_INIT_SP_ADDR \
	88	(CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
	89
22ee6473 SG	90	/* NAND flash */
22ee6473 SG	91	#ifdef CONFIG_CMD_NAND
22ee6473 SG	92	#define CONFIG_NAND_ATMEL
22ee6473 SG	93	#define CONFIG_SYS_MAX_NAND_DEVICE 1
5cfeec51 TP	94	#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3
5cfeec51 TP	95	#define CONFIG_SYS_NAND_DBW_8
22ee6473 SG	96	/* our ALE is AD21 */
	97	#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
	98	/* our CLE is AD22 */
	99	#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
	100	#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14
	101	#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC8
2eb99ca8	102
22ee6473 SG	103	#endif
22ee6473 SG	104
cf874c19 WJ	105	/* MMC */
	106	#define CONFIG_CMD_MMC
	107
	108	#ifdef CONFIG_CMD_MMC
	109	#define CONFIG_MMC
	110	#define CONFIG_GENERIC_MMC
	111	#define CONFIG_GENERIC_ATMEL_MCI
	112	#endif
	113
	114	#if defined(CONFIG_CMD_USB) \|\| defined(CONFIG_CMD_MMC)
	115	#define CONFIG_CMD_FAT
	116	#define CONFIG_DOS_PARTITION
	117	#endif
	118
22ee6473	119	/* Ethernet */
5cfeec51 TP	120	#define CONFIG_MACB
5cfeec51 TP	121	#define CONFIG_RMII
22ee6473	122	#define CONFIG_NET_RETRY_COUNT 20
5cfeec51	123	#define CONFIG_RESET_PHY_R
4535a24c	124	#define CONFIG_AT91_WANTS_COMMON_PHY
22ee6473 SG	125
22ee6473 SG	126	/* USB */
e1edd065 BS	127	#define CONFIG_USB_EHCI
	128	#define CONFIG_USB_EHCI_ATMEL
	129	#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2
5cfeec51	130	#define CONFIG_USB_STORAGE
22ee6473	131
5cfeec51	132	#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
22ee6473	133
5cfeec51 TP	134	#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
5cfeec51 TP	135	#define CONFIG_SYS_MEMTEST_END 0x23e00000
22ee6473	136
9637a1bb	137	#ifdef CONFIG_SYS_USE_NANDFLASH
5cfeec51 TP	138	/* bootstrap + u-boot + env in nandflash */
5cfeec51 TP	139	#define CONFIG_ENV_IS_IN_NAND
0c58cfa9 BS	140	#define CONFIG_ENV_OFFSET 0xc0000
0c58cfa9 BS	141	#define CONFIG_ENV_OFFSET_REDUND 0x100000
5cfeec51 TP	142	#define CONFIG_ENV_SIZE 0x20000
5cfeec51 TP	143
0c58cfa9 BS	144	#define CONFIG_BOOTCOMMAND \
0c58cfa9 BS	145	"nand read 0x70000000 0x200000 0x300000;" \
5cfeec51 TP	146	"bootm 0x70000000"
	147	#define CONFIG_BOOTARGS \
	148	"console=ttyS0,115200 earlyprintk " \
0c58cfa9 BS	149	"mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \
	150	"256k(env),256k(env_redundant),256k(spare)," \
	151	"512k(dtb),6M(kernel)ro,-(rootfs) " \
	152	"root=/dev/mtdblock7 rw rootfstype=jffs2"
9637a1bb WJ	153	#elif CONFIG_SYS_USE_MMC
	154	/* bootstrap + u-boot + env + linux in mmc */
	155	#define FAT_ENV_INTERFACE "mmc"
be354c1a WJ	156	/*
	157	* We don't specify the part number, if device 0 has partition table, it means
	158	* the first partition; it no partition table, then take whole device as a
	159	* FAT file system.
	160	*/
	161	#define FAT_ENV_DEVICE_AND_PART "0"
9637a1bb WJ	162	#define FAT_ENV_FILE "uboot.env"
	163	#define CONFIG_ENV_IS_IN_FAT
	164	#define CONFIG_FAT_WRITE
	165	#define CONFIG_ENV_SIZE 0x4000
	166
	167	#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
	168	"mtdparts=atmel_nand:" \
	169	"8M(bootstrap/uboot/kernel)ro,-(rootfs) " \
	170	"root=/dev/mmcblk0p2 rw rootwait"
	171	#define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x71000000 dtb; " \
	172	"fatload mmc 0:1 0x72000000 zImage; " \
	173	"bootz 0x72000000 - 0x71000000"
	174	#endif
5cfeec51 TP	175
5cfeec51 TP	176	#define CONFIG_BAUDRATE 115200
22ee6473	177
22ee6473 SG	178	#define CONFIG_SYS_CBSIZE 256
22ee6473 SG	179	#define CONFIG_SYS_MAXARGS 16
5cfeec51 TP	180	#define CONFIG_SYS_LONGHELP
5cfeec51 TP	181	#define CONFIG_CMDLINE_EDITING
22ee6473	182	#define CONFIG_AUTO_COMPLETE
22ee6473	183
22ee6473 SG	184	/*
	185	* Size of malloc() pool
	186	*/
	187	#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
22ee6473	188
41d41a93 BS	189	/* Defines for SPL */
	190	#define CONFIG_SPL_FRAMEWORK
	191	#define CONFIG_SPL_TEXT_BASE 0x300000
	192	#define CONFIG_SPL_MAX_SIZE 0x010000
	193	#define CONFIG_SPL_STACK 0x310000
	194
	195	#define CONFIG_SPL_LIBCOMMON_SUPPORT
	196	#define CONFIG_SPL_LIBGENERIC_SUPPORT
	197	#define CONFIG_SPL_SERIAL_SUPPORT
	198	#define CONFIG_SPL_GPIO_SUPPORT
	199
	200	#define CONFIG_SYS_MONITOR_LEN 0x80000
	201
	202	#ifdef CONFIG_SYS_USE_MMC
	203
	204	#define CONFIG_SPL_BSS_START_ADDR 0x70000000
	205	#define CONFIG_SPL_BSS_MAX_SIZE 0x00080000
	206	#define CONFIG_SYS_SPL_MALLOC_START 0x70080000
	207	#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00080000
	208
	209	#define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/arm926ejs/u-boot-spl.lds
	210	#define CONFIG_SPL_MMC_SUPPORT
	211	#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400
	212	#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200
	213	#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
	214	#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
	215	#define CONFIG_SPL_FAT_SUPPORT
	216	#define CONFIG_SPL_LIBDISK_SUPPORT
	217
	218	#elif CONFIG_SYS_USE_NANDFLASH
	219	#define CONFIG_SPL_NAND_SUPPORT
	220	#define CONFIG_SPL_NAND_DRIVERS
	221	#define CONFIG_SPL_NAND_BASE
	222	#define CONFIG_SPL_NAND_ECC
	223	#define CONFIG_SPL_NAND_SOFTECC
	224	#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000
	225	#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x80000
	226	#define CONFIG_SYS_NAND_5_ADDR_CYCLE
	227
	228	#define CONFIG_SYS_NAND_PAGE_SIZE 0x800
	229	#define CONFIG_SYS_NAND_BLOCK_SIZE 0x20000
	230	#define CONFIG_SYS_NAND_PAGE_COUNT 64
	231	#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
	232	#define CONFIG_SYS_NAND_ECCSIZE 256
	233	#define CONFIG_SYS_NAND_ECCBYTES 3
	234	#define CONFIG_SYS_NAND_OOBSIZE 64
	235	#define CONFIG_SYS_NAND_ECCPOS { 40, 41, 42, 43, 44, 45, 46, 47, \
	236	48, 49, 50, 51, 52, 53, 54, 55, \
	237	56, 57, 58, 59, 60, 61, 62, 63, }
	238	#endif
	239
	240	#define CONFIG_SPL_ATMEL_SIZE
	241	#define CONFIG_SYS_MASTER_CLOCK 132096000
	242	#define CONFIG_SYS_AT91_PLLA 0x20c73f03
	243	#define CONFIG_SYS_MCKR 0x1301
	244	#define CONFIG_SYS_MCKR_CSS 0x1302
	245
22ee6473	246	#endif