[people/ms/u-boot.git] / include / configs / at91sam9n12ek.h

/*
 * (C) Copyright 2013 Atmel Corporation.
 * Josh Wu <josh.wu@atmel.com>
 *
 * Configuation settings for the AT91SAM9N12-EK boards.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __AT91SAM9N12_CONFIG_H_
#define __AT91SAM9N12_CONFIG_H_

/*
 * SoC must be defined first, before hardware.h is included.
 * In this case SoC is defined in boards.cfg.
 */
#include <asm/hardware.h>

#define CONFIG_SYS_TEXT_BASE		0x26f00000

/* ARM asynchronous clock */
#define CONFIG_SYS_AT91_SLOW_CLOCK	32768		/* slow clock xtal */
#define CONFIG_SYS_AT91_MAIN_CLOCK	16000000	/* main clock xtal */

/* Misc CPU related */
#define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
#define CONFIG_SKIP_LOWLEVEL_INIT

/* LCD */
#define LCD_BPP				LCD_COLOR16
#define LCD_OUTPUT_BPP			24
#define CONFIG_LCD_LOGO
#define CONFIG_LCD_INFO
#define CONFIG_LCD_INFO_BELOW_LOGO
#define CONFIG_ATMEL_HLCD
#define CONFIG_ATMEL_LCD_RGB565

/*
 * BOOTP options
 */
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME

/*
 * Command line configuration.
 */
#define CONFIG_CMD_NAND

#define CONFIG_NR_DRAM_BANKS		1
#define CONFIG_SYS_SDRAM_BASE		0x20000000
#define CONFIG_SYS_SDRAM_SIZE		0x08000000

/*
 * Initial stack pointer: 4k - GENERATED_GBL_DATA_SIZE in internal SRAM,
 * leaving the correct space for initial global data structure above
 * that address while providing maximum stack area below.
 */
# define CONFIG_SYS_INIT_SP_ADDR \
	(ATMEL_BASE_SRAM + 16 * 1024 - GENERATED_GBL_DATA_SIZE)

/* DataFlash */
#ifdef CONFIG_CMD_SF
#define CONFIG_SF_DEFAULT_SPEED		30000000
#endif

/* NAND flash */
#ifdef CONFIG_CMD_NAND
#define CONFIG_NAND_ATMEL
#define CONFIG_SYS_MAX_NAND_DEVICE	1
#define CONFIG_SYS_NAND_BASE		0x40000000
#define CONFIG_SYS_NAND_MASK_ALE	(1 << 21)
#define CONFIG_SYS_NAND_MASK_CLE	(1 << 22)
#define CONFIG_SYS_NAND_ENABLE_PIN	GPIO_PIN_PD(4)
#define CONFIG_SYS_NAND_READY_PIN	GPIO_PIN_PD(5)

/* PMECC & PMERRLOC */
#define CONFIG_ATMEL_NAND_HWECC
#define CONFIG_ATMEL_NAND_HW_PMECC
#define CONFIG_PMECC_CAP		2
#define CONFIG_PMECC_SECTOR_SIZE	512
#define CONFIG_PMECC_INDEX_TABLE_OFFSET	0x8000

#define CONFIG_CMD_NAND_TRIMFFS

#endif

#define CONFIG_MTD_PARTITIONS
#define CONFIG_MTD_DEVICE
#define CONFIG_CMD_MTDPARTS
#define MTDIDS_DEFAULT			"nand0=atmel_nand"
#define MTDPARTS_DEFAULT						\
	"mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,"		\
	"256k(env),256k(env_redundant),256k(spare),"			\
	"512k(dtb),6M(kernel)ro,-(rootfs)"

#define CONFIG_EXTRA_ENV_SETTINGS                                       \
	"console=console=ttyS0,115200\0"                                \
	"mtdparts="MTDPARTS_DEFAULT"\0"					\
	"bootargs_nand=rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs rw\0"\
	"bootargs_mmc=root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait\0"

/* Ethernet */
#define CONFIG_KS8851_MLL
#define CONFIG_KS8851_MLL_BASEADDR	0x30000000 /* use NCS2 */

#define CONFIG_SYS_LOAD_ADDR		0x22000000 /* load address */

#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
#define CONFIG_SYS_MEMTEST_END		0x26e00000

/* USB host */
#ifdef CONFIG_CMD_USB
#define CONFIG_USB_ATMEL
#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
#define CONFIG_USB_OHCI_NEW
#define CONFIG_SYS_USB_OHCI_CPU_INIT
#define CONFIG_SYS_USB_OHCI_REGS_BASE	ATMEL_BASE_OHCI
#define CONFIG_SYS_USB_OHCI_SLOT_NAME	"at91sam9n12"
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	1
#endif

#ifdef CONFIG_SYS_USE_SPIFLASH

/* bootstrap + u-boot + env + linux in dataflash on CS0 */
#define CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_ENV_OFFSET		0x5000
#define CONFIG_ENV_SIZE			0x3000
#define CONFIG_ENV_SECT_SIZE		0x1000
#define CONFIG_BOOTCOMMAND						\
	"setenv bootargs ${console} ${mtdparts} ${bootargs_nand};"	\
	"sf probe 0; sf read 0x22000000 0x100000 0x300000; "		\
	"bootm 0x22000000"

#elif defined(CONFIG_SYS_USE_NANDFLASH)

/* bootstrap + u-boot + env + linux in nandflash */
#define CONFIG_ENV_IS_IN_NAND
#define CONFIG_ENV_OFFSET		0x120000
#define CONFIG_ENV_OFFSET_REDUND	0x100000
#define CONFIG_ENV_SIZE			0x20000		/* 1 sector = 128 kB */
#define CONFIG_BOOTCOMMAND						\
	"setenv bootargs ${console} ${mtdparts} ${bootargs_nand};"	\
	"nand read 0x21000000 0x180000 0x080000;"			\
	"nand read 0x22000000 0x200000 0x400000;"			\
	"bootm 0x22000000 - 0x21000000"

#else /* CONFIG_SYS_USE_MMC */

/* bootstrap + u-boot + env + linux in mmc */

#ifdef CONFIG_ENV_IS_IN_MMC
/* Use raw reserved sectors to save environment */
#define CONFIG_ENV_OFFSET		0x2000
#define CONFIG_ENV_SIZE			0x1000
#define CONFIG_SYS_MMC_ENV_DEV		0
#else
/* Use file in FAT file to save environment */
#define CONFIG_ENV_IS_IN_FAT
#define FAT_ENV_INTERFACE		"mmc"
#define FAT_ENV_FILE			"uboot.env"
#define FAT_ENV_DEVICE_AND_PART		"0"
#define CONFIG_ENV_SIZE			0x4000
#endif

#define CONFIG_BOOTCOMMAND						\
	"setenv bootargs ${console} ${mtdparts} ${bootargs_mmc};"	\
	"fatload mmc 0:1 0x21000000 dtb;"				\
	"fatload mmc 0:1 0x22000000 uImage;"				\
	"bootm 0x22000000 - 0x21000000"

#endif

#define CONFIG_SYS_CBSIZE	256
#define CONFIG_SYS_MAXARGS	16
#define CONFIG_SYS_LONGHELP
#define CONFIG_CMDLINE_EDITING
#define CONFIG_AUTO_COMPLETE

/*
 * Size of malloc() pool
 */
#define CONFIG_SYS_MALLOC_LEN	(4 * 1024 * 1024)

/* SPL */
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_TEXT_BASE		0x300000
#define CONFIG_SPL_MAX_SIZE		0x6000
#define CONFIG_SPL_STACK		0x308000

#define CONFIG_SPL_BSS_START_ADDR	0x20000000
#define CONFIG_SPL_BSS_MAX_SIZE		0x80000
#define CONFIG_SYS_SPL_MALLOC_START	0x20080000
#define CONFIG_SYS_SPL_MALLOC_SIZE	0x80000

#define CONFIG_SYS_MONITOR_LEN		(512 << 10)

#define CONFIG_SYS_MASTER_CLOCK		132096000
#define CONFIG_SYS_AT91_PLLA		0x20953f03
#define CONFIG_SYS_MCKR			0x1301
#define CONFIG_SYS_MCKR_CSS		0x1302

#ifdef CONFIG_SYS_USE_MMC
#define CONFIG_SPL_LDSCRIPT		arch/arm/mach-at91/arm926ejs/u-boot-spl.lds
#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME		"u-boot.img"

#elif CONFIG_SYS_USE_NANDFLASH
#define CONFIG_SPL_NAND_DRIVERS
#define CONFIG_SPL_NAND_BASE
#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x40000
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_PAGE_SIZE	0x800
#define CONFIG_SYS_NAND_PAGE_COUNT	64
#define CONFIG_SYS_NAND_OOBSIZE		64
#define CONFIG_SYS_NAND_BLOCK_SIZE	0x20000
#define CONFIG_SYS_NAND_BAD_BLOCK_POS	0x0
#define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER

#elif CONFIG_SYS_USE_SPIFLASH
#define CONFIG_SPL_SPI_LOAD
#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x8400

#endif

#endif
Commit	Line	Data
9e336903 WJ	1	/*
	2	* (C) Copyright 2013 Atmel Corporation.
	3	* Josh Wu <josh.wu@atmel.com>
	4	*
	5	* Configuation settings for the AT91SAM9N12-EK boards.
	6	*
1a459660	7	* SPDX-License-Identifier: GPL-2.0+
9e336903 WJ	8	*/
	9
	10	#ifndef __AT91SAM9N12_CONFIG_H_
	11	#define __AT91SAM9N12_CONFIG_H_
	12
	13	/*
	14	* SoC must be defined first, before hardware.h is included.
	15	* In this case SoC is defined in boards.cfg.
	16	*/
	17	#include <asm/hardware.h>
	18
	19	#define CONFIG_SYS_TEXT_BASE 0x26f00000
	20
9e336903 WJ	21	/* ARM asynchronous clock */
	22	#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */
	23	#define CONFIG_SYS_AT91_MAIN_CLOCK 16000000 /* main clock xtal */
9e336903 WJ	24
	25	/* Misc CPU related */
	26	#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
	27	#define CONFIG_SETUP_MEMORY_TAGS
	28	#define CONFIG_INITRD_TAG
	29	#define CONFIG_SKIP_LOWLEVEL_INIT
9e336903	30
9e336903	31	/* LCD */
9e336903 WJ	32	#define LCD_BPP LCD_COLOR16
	33	#define LCD_OUTPUT_BPP 24
	34	#define CONFIG_LCD_LOGO
	35	#define CONFIG_LCD_INFO
	36	#define CONFIG_LCD_INFO_BELOW_LOGO
9e336903 WJ	37	#define CONFIG_ATMEL_HLCD
9e336903 WJ	38	#define CONFIG_ATMEL_LCD_RGB565
9e336903	39
9e336903 WJ	40	/*
	41	* BOOTP options
	42	*/
	43	#define CONFIG_BOOTP_BOOTFILESIZE
	44	#define CONFIG_BOOTP_BOOTPATH
	45	#define CONFIG_BOOTP_GATEWAY
	46	#define CONFIG_BOOTP_HOSTNAME
	47
9e336903 WJ	48	/*
	49	* Command line configuration.
	50	*/
9e336903	51	#define CONFIG_CMD_NAND
9e336903 WJ	52
	53	#define CONFIG_NR_DRAM_BANKS 1
	54	#define CONFIG_SYS_SDRAM_BASE 0x20000000
	55	#define CONFIG_SYS_SDRAM_SIZE 0x08000000
	56
	57	/*
	58	* Initial stack pointer: 4k - GENERATED_GBL_DATA_SIZE in internal SRAM,
	59	* leaving the correct space for initial global data structure above
	60	* that address while providing maximum stack area below.
	61	*/
	62	# define CONFIG_SYS_INIT_SP_ADDR \
0ab5433d	63	(ATMEL_BASE_SRAM + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
9e336903 WJ	64
	65	/* DataFlash */
	66	#ifdef CONFIG_CMD_SF
9e336903	67	#define CONFIG_SF_DEFAULT_SPEED 30000000
9e336903 WJ	68	#endif
	69
	70	/* NAND flash */
	71	#ifdef CONFIG_CMD_NAND
	72	#define CONFIG_NAND_ATMEL
	73	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	74	#define CONFIG_SYS_NAND_BASE 0x40000000
	75	#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
	76	#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
ac45bb16 AB	77	#define CONFIG_SYS_NAND_ENABLE_PIN GPIO_PIN_PD(4)
ac45bb16 AB	78	#define CONFIG_SYS_NAND_READY_PIN GPIO_PIN_PD(5)
9e336903 WJ	79
	80	/* PMECC & PMERRLOC */
	81	#define CONFIG_ATMEL_NAND_HWECC
	82	#define CONFIG_ATMEL_NAND_HW_PMECC
	83	#define CONFIG_PMECC_CAP 2
	84	#define CONFIG_PMECC_SECTOR_SIZE 512
	85	#define CONFIG_PMECC_INDEX_TABLE_OFFSET 0x8000
ce76f0aa BS	86
	87	#define CONFIG_CMD_NAND_TRIMFFS
	88
9e336903 WJ	89	#endif
	90
	91	#define CONFIG_MTD_PARTITIONS
	92	#define CONFIG_MTD_DEVICE
	93	#define CONFIG_CMD_MTDPARTS
	94	#define MTDIDS_DEFAULT "nand0=atmel_nand"
	95	#define MTDPARTS_DEFAULT \
	96	"mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \
	97	"256k(env),256k(env_redundant),256k(spare)," \
	98	"512k(dtb),6M(kernel)ro,-(rootfs)"
	99
	100	#define CONFIG_EXTRA_ENV_SETTINGS \
	101	"console=console=ttyS0,115200\0" \
	102	"mtdparts="MTDPARTS_DEFAULT"\0" \
	103	"bootargs_nand=rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs rw\0"\
	104	"bootargs_mmc=root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait\0"
	105
16276220 BS	106	/* Ethernet */
	107	#define CONFIG_KS8851_MLL
	108	#define CONFIG_KS8851_MLL_BASEADDR 0x30000000 /* use NCS2 */
	109
9e336903 WJ	110	#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
	111
	112	#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
	113	#define CONFIG_SYS_MEMTEST_END 0x26e00000
	114
d9bef0ad BS	115	/* USB host */
	116	#ifdef CONFIG_CMD_USB
	117	#define CONFIG_USB_ATMEL
dcd2f1a0	118	#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
d9bef0ad BS	119	#define CONFIG_USB_OHCI_NEW
	120	#define CONFIG_SYS_USB_OHCI_CPU_INIT
	121	#define CONFIG_SYS_USB_OHCI_REGS_BASE ATMEL_BASE_OHCI
	122	#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9n12"
	123	#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1
d9bef0ad BS	124	#endif
d9bef0ad BS	125
9e336903 WJ	126	#ifdef CONFIG_SYS_USE_SPIFLASH
	127
	128	/* bootstrap + u-boot + env + linux in dataflash on CS0 */
	129	#define CONFIG_ENV_IS_IN_SPI_FLASH
	130	#define CONFIG_ENV_OFFSET 0x5000
	131	#define CONFIG_ENV_SIZE 0x3000
	132	#define CONFIG_ENV_SECT_SIZE 0x1000
	133	#define CONFIG_BOOTCOMMAND \
	134	"setenv bootargs ${console} ${mtdparts} ${bootargs_nand};" \
	135	"sf probe 0; sf read 0x22000000 0x100000 0x300000; " \
	136	"bootm 0x22000000"
	137
	138	#elif defined(CONFIG_SYS_USE_NANDFLASH)
	139
	140	/* bootstrap + u-boot + env + linux in nandflash */
	141	#define CONFIG_ENV_IS_IN_NAND
0ab5433d	142	#define CONFIG_ENV_OFFSET 0x120000
9e336903 WJ	143	#define CONFIG_ENV_OFFSET_REDUND 0x100000
	144	#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */
	145	#define CONFIG_BOOTCOMMAND \
	146	"setenv bootargs ${console} ${mtdparts} ${bootargs_nand};" \
	147	"nand read 0x21000000 0x180000 0x080000;" \
	148	"nand read 0x22000000 0x200000 0x400000;" \
	149	"bootm 0x22000000 - 0x21000000"
	150
	151	#else /* CONFIG_SYS_USE_MMC */
	152
	153	/* bootstrap + u-boot + env + linux in mmc */
23ac62d4 WJ	154
	155	#ifdef CONFIG_ENV_IS_IN_MMC
	156	/* Use raw reserved sectors to save environment */
9e336903 WJ	157	#define CONFIG_ENV_OFFSET 0x2000
	158	#define CONFIG_ENV_SIZE 0x1000
	159	#define CONFIG_SYS_MMC_ENV_DEV 0
23ac62d4 WJ	160	#else
	161	/* Use file in FAT file to save environment */
	162	#define CONFIG_ENV_IS_IN_FAT
23ac62d4 WJ	163	#define FAT_ENV_INTERFACE "mmc"
	164	#define FAT_ENV_FILE "uboot.env"
	165	#define FAT_ENV_DEVICE_AND_PART "0"
	166	#define CONFIG_ENV_SIZE 0x4000
	167	#endif
	168
9e336903 WJ	169	#define CONFIG_BOOTCOMMAND \
	170	"setenv bootargs ${console} ${mtdparts} ${bootargs_mmc};" \
	171	"fatload mmc 0:1 0x21000000 dtb;" \
	172	"fatload mmc 0:1 0x22000000 uImage;" \
	173	"bootm 0x22000000 - 0x21000000"
	174
	175	#endif
	176
9e336903 WJ	177	#define CONFIG_SYS_CBSIZE 256
9e336903 WJ	178	#define CONFIG_SYS_MAXARGS 16
9e336903 WJ	179	#define CONFIG_SYS_LONGHELP
	180	#define CONFIG_CMDLINE_EDITING
	181	#define CONFIG_AUTO_COMPLETE
9e336903 WJ	182
	183	/*
	184	* Size of malloc() pool
	185	*/
	186	#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
ff255e83 BS	187
	188	/* SPL */
	189	#define CONFIG_SPL_FRAMEWORK
	190	#define CONFIG_SPL_TEXT_BASE 0x300000
	191	#define CONFIG_SPL_MAX_SIZE 0x6000
	192	#define CONFIG_SPL_STACK 0x308000
	193
	194	#define CONFIG_SPL_BSS_START_ADDR 0x20000000
	195	#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
	196	#define CONFIG_SYS_SPL_MALLOC_START 0x20080000
	197	#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000
	198
ff255e83 BS	199	#define CONFIG_SYS_MONITOR_LEN (512 << 10)
	200
	201	#define CONFIG_SYS_MASTER_CLOCK 132096000
	202	#define CONFIG_SYS_AT91_PLLA 0x20953f03
	203	#define CONFIG_SYS_MCKR 0x1301
	204	#define CONFIG_SYS_MCKR_CSS 0x1302
	205
ff255e83 BS	206	#ifdef CONFIG_SYS_USE_MMC
ff255e83 BS	207	#define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/arm926ejs/u-boot-spl.lds
ff255e83 BS	208	#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
ff255e83 BS	209	#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
ff255e83 BS	210
ff255e83 BS	211	#elif CONFIG_SYS_USE_NANDFLASH
ff255e83 BS	212	#define CONFIG_SPL_NAND_DRIVERS
	213	#define CONFIG_SPL_NAND_BASE
	214	#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000
	215	#define CONFIG_SYS_NAND_5_ADDR_CYCLE
	216	#define CONFIG_SYS_NAND_PAGE_SIZE 0x800
	217	#define CONFIG_SYS_NAND_PAGE_COUNT 64
	218	#define CONFIG_SYS_NAND_OOBSIZE 64
	219	#define CONFIG_SYS_NAND_BLOCK_SIZE 0x20000
	220	#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0x0
	221	#define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER
	222
	223	#elif CONFIG_SYS_USE_SPIFLASH
ff255e83 BS	224	#define CONFIG_SPL_SPI_LOAD
	225	#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8400
	226
	227	#endif
9e336903 WJ	228
9e336903 WJ	229	#endif