[people/ms/u-boot.git] / include / configs / axs101.h

/*
 * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef _CONFIG_AXS101_H_
#define _CONFIG_AXS101_H_

/*
 *  CPU configuration
 */
#define CONFIG_SYS_TIMER_RATE		CONFIG_SYS_CLK_FREQ

/*
 * Board configuration
 */
#define CONFIG_ARCH_EARLY_INIT_R

#define ARC_FPGA_PERIPHERAL_BASE	0xE0000000
#define ARC_APB_PERIPHERAL_BASE		0xF0000000
#define ARC_DWMMC_BASE			(ARC_FPGA_PERIPHERAL_BASE + 0x15000)
#define ARC_DWGMAC_BASE			(ARC_FPGA_PERIPHERAL_BASE + 0x18000)

/*
 * Memory configuration
 */
#define CONFIG_SYS_TEXT_BASE		0x81000000
#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_TEXT_BASE

#define CONFIG_SYS_DDR_SDRAM_BASE	0x80000000
#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
#define CONFIG_SYS_SDRAM_SIZE		0x20000000	/* 512 Mb */

#define CONFIG_SYS_INIT_SP_ADDR		\
	(CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)

#define CONFIG_SYS_MALLOC_LEN		0x200000	/* 2 MB */
#define CONFIG_SYS_BOOTM_LEN		0x2000000	/* 32 MB */
#define CONFIG_SYS_LOAD_ADDR		0x82000000

/*
 * NAND Flash configuration
 */
#define CONFIG_SYS_NO_FLASH
#define CONFIG_SYS_NAND_BASE		(ARC_FPGA_PERIPHERAL_BASE + 0x16000)
#define CONFIG_SYS_MAX_NAND_DEVICE	1

/*
 * UART configuration
 *
 * CONFIG_CONS_INDEX = 1 - Debug UART
 * CONFIG_CONS_INDEX = 4 - FPGA UART connected to FTDI/USB
 */
#define CONFIG_CONS_INDEX		4
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE	-4
#if (CONFIG_CONS_INDEX == 1)
	/* Debug UART */
#	define CONFIG_SYS_NS16550_CLK		33333000
#else
	/* FPGA UARTs use different clock */
#	define CONFIG_SYS_NS16550_CLK		33333333
#endif
#define CONFIG_SYS_NS16550_COM1		(ARC_APB_PERIPHERAL_BASE + 0x5000)
#define CONFIG_SYS_NS16550_COM2		(ARC_FPGA_PERIPHERAL_BASE + 0x20000)
#define CONFIG_SYS_NS16550_COM3		(ARC_FPGA_PERIPHERAL_BASE + 0x21000)
#define CONFIG_SYS_NS16550_COM4		(ARC_FPGA_PERIPHERAL_BASE + 0x22000)
#define CONFIG_SYS_NS16550_MEM32

#define CONFIG_BAUDRATE			115200
/*
 * I2C configuration
 */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_DW
#define CONFIG_I2C_ENV_EEPROM_BUS	2
#define CONFIG_SYS_I2C_SPEED		100000
#define CONFIG_SYS_I2C_SPEED1		100000
#define CONFIG_SYS_I2C_SPEED2		100000
#define CONFIG_SYS_I2C_SLAVE		0
#define CONFIG_SYS_I2C_SLAVE1		0
#define CONFIG_SYS_I2C_SLAVE2		0
#define CONFIG_SYS_I2C_BASE		0xE001D000
#define CONFIG_SYS_I2C_BASE1		0xE001E000
#define CONFIG_SYS_I2C_BASE2		0xE001F000
#define CONFIG_SYS_I2C_BUS_MAX		3
#define IC_CLK				50

/*
 * EEPROM configuration
 */
#define CONFIG_SYS_I2C_MULTI_EEPROMS
#define CONFIG_SYS_I2C_EEPROM_ADDR		(0xA8 >> 1)
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW	1
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	64

/*
 * SD/MMC configuration
 */
#define CONFIG_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_DWMMC
#define CONFIG_DOS_PARTITION

/*
 * Ethernet PHY configuration
 */
#define CONFIG_PHYLIB
#define CONFIG_MII
#define CONFIG_PHY_GIGE

/*
 * Ethernet configuration
 */
#define CONFIG_DESIGNWARE_ETH
#define CONFIG_DW_AUTONEG
#define CONFIG_NET_MULTI

/*
 * Command line configuration
 */
#include <config_cmd_default.h>

#define CONFIG_CMD_DHCP
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_ELF
#define CONFIG_CMD_FAT
#define CONFIG_CMD_I2C
#define CONFIG_CMD_MMC
#define CONFIG_CMD_NAND
#define CONFIG_CMD_PING
#define CONFIG_CMD_RARP

#define CONFIG_OF_LIBFDT

#define CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_MAXARGS		16

/*
 * Environment settings
 */
#define CONFIG_ENV_IS_IN_EEPROM
#define CONFIG_ENV_SIZE			0x00200		/* 512 bytes */
#define CONFIG_ENV_OFFSET		0

/*
 * Environment configuration
 */
#define CONFIG_BOOTDELAY		3
#define CONFIG_BOOTFILE			"uImage"
#define CONFIG_BOOTARGS			"console=ttyS3,115200n8"
#define CONFIG_LOADADDR			CONFIG_SYS_LOAD_ADDR

/*
 * Console configuration
 */
#define CONFIG_SYS_LONGHELP
#define CONFIG_SYS_PROMPT		"AXS# "
#define CONFIG_SYS_CBSIZE		256
#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
						sizeof(CONFIG_SYS_PROMPT) + 16)

/*
 * Misc utility configuration
 */
#define CONFIG_BOUNCE_BUFFER

#endif /* _CONFIG_AXS101_H_ */
Commit	Line	Data
a7069ddf AB	1	/*
	2	* Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved.
	3	*
	4	* SPDX-License-Identifier: GPL-2.0+
	5	*/
	6
	7	#ifndef _CONFIG_AXS101_H_
	8	#define _CONFIG_AXS101_H_
	9
	10	/*
	11	* CPU configuration
	12	*/
a7069ddf AB	13	#define CONFIG_SYS_TIMER_RATE CONFIG_SYS_CLK_FREQ
a7069ddf AB	14
a7069ddf AB	15	/*
	16	* Board configuration
	17	*/
a7069ddf AB	18	#define CONFIG_ARCH_EARLY_INIT_R
	19
	20	#define ARC_FPGA_PERIPHERAL_BASE 0xE0000000
	21	#define ARC_APB_PERIPHERAL_BASE 0xF0000000
	22	#define ARC_DWMMC_BASE (ARC_FPGA_PERIPHERAL_BASE + 0x15000)
	23	#define ARC_DWGMAC_BASE (ARC_FPGA_PERIPHERAL_BASE + 0x18000)
	24
	25	/*
	26	* Memory configuration
	27	*/
	28	#define CONFIG_SYS_TEXT_BASE 0x81000000
	29	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
	30
	31	#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000
	32	#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
0cdd7620	33	#define CONFIG_SYS_SDRAM_SIZE 0x20000000 /* 512 Mb */
a7069ddf AB	34
	35	#define CONFIG_SYS_INIT_SP_ADDR \
	36	(CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
	37
	38	#define CONFIG_SYS_MALLOC_LEN 0x200000 /* 2 MB */
	39	#define CONFIG_SYS_BOOTM_LEN 0x2000000 /* 32 MB */
	40	#define CONFIG_SYS_LOAD_ADDR 0x82000000
	41
	42	/*
	43	* NAND Flash configuration
	44	*/
	45	#define CONFIG_SYS_NO_FLASH
	46	#define CONFIG_SYS_NAND_BASE (ARC_FPGA_PERIPHERAL_BASE + 0x16000)
	47	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	48
	49	/*
	50	* UART configuration
	51	*
	52	* CONFIG_CONS_INDEX = 1 - Debug UART
	53	* CONFIG_CONS_INDEX = 4 - FPGA UART connected to FTDI/USB
	54	*/
	55	#define CONFIG_CONS_INDEX 4
	56	#define CONFIG_SYS_NS16550
	57	#define CONFIG_SYS_NS16550_SERIAL
	58	#define CONFIG_SYS_NS16550_REG_SIZE -4
	59	#if (CONFIG_CONS_INDEX == 1)
	60	/* Debug UART */
	61	# define CONFIG_SYS_NS16550_CLK 33333000
	62	#else
	63	/* FPGA UARTs use different clock */
	64	# define CONFIG_SYS_NS16550_CLK 33333333
	65	#endif
	66	#define CONFIG_SYS_NS16550_COM1 (ARC_APB_PERIPHERAL_BASE + 0x5000)
	67	#define CONFIG_SYS_NS16550_COM2 (ARC_FPGA_PERIPHERAL_BASE + 0x20000)
	68	#define CONFIG_SYS_NS16550_COM3 (ARC_FPGA_PERIPHERAL_BASE + 0x21000)
	69	#define CONFIG_SYS_NS16550_COM4 (ARC_FPGA_PERIPHERAL_BASE + 0x22000)
	70	#define CONFIG_SYS_NS16550_MEM32
	71
	72	#define CONFIG_BAUDRATE 115200
	73	/*
	74	* I2C configuration
	75	*/
678398b1 SR	76	#define CONFIG_SYS_I2C
678398b1 SR	77	#define CONFIG_SYS_I2C_DW
a7069ddf AB	78	#define CONFIG_I2C_ENV_EEPROM_BUS 2
a7069ddf AB	79	#define CONFIG_SYS_I2C_SPEED 100000
678398b1 SR	80	#define CONFIG_SYS_I2C_SPEED1 100000
678398b1 SR	81	#define CONFIG_SYS_I2C_SPEED2 100000
a7069ddf	82	#define CONFIG_SYS_I2C_SLAVE 0
678398b1 SR	83	#define CONFIG_SYS_I2C_SLAVE1 0
678398b1 SR	84	#define CONFIG_SYS_I2C_SLAVE2 0
a7069ddf AB	85	#define CONFIG_SYS_I2C_BASE 0xE001D000
	86	#define CONFIG_SYS_I2C_BASE1 0xE001E000
	87	#define CONFIG_SYS_I2C_BASE2 0xE001F000
	88	#define CONFIG_SYS_I2C_BUS_MAX 3
	89	#define IC_CLK 50
	90
	91	/*
	92	* EEPROM configuration
	93	*/
	94	#define CONFIG_SYS_I2C_MULTI_EEPROMS
	95	#define CONFIG_SYS_I2C_EEPROM_ADDR (0xA8 >> 1)
	96	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
	97	#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 1
	98	#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
6bfa4420	99	#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 64
a7069ddf AB	100
	101	/*
	102	* SD/MMC configuration
	103	*/
	104	#define CONFIG_MMC
	105	#define CONFIG_GENERIC_MMC
	106	#define CONFIG_DWMMC
	107	#define CONFIG_DOS_PARTITION
	108
	109	/*
	110	* Ethernet PHY configuration
	111	*/
	112	#define CONFIG_PHYLIB
	113	#define CONFIG_MII
	114	#define CONFIG_PHY_GIGE
	115
	116	/*
	117	* Ethernet configuration
	118	*/
	119	#define CONFIG_DESIGNWARE_ETH
	120	#define CONFIG_DW_AUTONEG
a7069ddf AB	121	#define CONFIG_NET_MULTI
	122
	123	/*
	124	* Command line configuration
	125	*/
	126	#include <config_cmd_default.h>
	127
	128	#define CONFIG_CMD_DHCP
	129	#define CONFIG_CMD_EEPROM
	130	#define CONFIG_CMD_ELF
	131	#define CONFIG_CMD_FAT
	132	#define CONFIG_CMD_I2C
	133	#define CONFIG_CMD_MMC
	134	#define CONFIG_CMD_NAND
	135	#define CONFIG_CMD_PING
	136	#define CONFIG_CMD_RARP
	137
	138	#define CONFIG_OF_LIBFDT
	139
	140	#define CONFIG_AUTO_COMPLETE
	141	#define CONFIG_SYS_MAXARGS 16
	142
	143	/*
	144	* Environment settings
	145	*/
	146	#define CONFIG_ENV_IS_IN_EEPROM
	147	#define CONFIG_ENV_SIZE 0x00200 /* 512 bytes */
	148	#define CONFIG_ENV_OFFSET 0
	149
	150	/*
	151	* Environment configuration
	152	*/
	153	#define CONFIG_BOOTDELAY 3
	154	#define CONFIG_BOOTFILE "uImage"
	155	#define CONFIG_BOOTARGS "console=ttyS3,115200n8"
	156	#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
	157
	158	/*
	159	* Console configuration
	160	*/
	161	#define CONFIG_SYS_LONGHELP
c42eb7f2	162	#define CONFIG_SYS_PROMPT "AXS# "
a7069ddf AB	163	#define CONFIG_SYS_CBSIZE 256
	164	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
	165	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
	166	sizeof(CONFIG_SYS_PROMPT) + 16)
	167
	168	/*
	169	* Misc utility configuration
	170	*/
	171	#define CONFIG_BOUNCE_BUFFER
	172
	173	#endif /* _CONFIG_AXS101_H_ */