[people/ms/u-boot.git] / include / configs / baltos.h

/*
 * am335x_evm.h
 *
 * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation version 2.
 *
 * This program is distributed "as is" WITHOUT ANY WARRANTY of any
 * kind, whether express or implied; without even the implied warranty
 * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#ifndef __CONFIG_BALTOS_H
#define __CONFIG_BALTOS_H

#include <linux/sizes.h>
#include <configs/ti_am335x_common.h>

#define MACH_TYPE_TIAM335EVM		3589	/* Until the next sync */
#define CONFIG_MACH_TYPE		MACH_TYPE_TIAM335EVM
#define CONFIG_BOARD_LATE_INIT

/* Clock Defines */
#define V_OSCK				24000000  /* Clock output from T2 */
#define V_SCLK				(V_OSCK)

/* Custom script for NOR */
#define CONFIG_SYS_LDSCRIPT		"board/vscom/baltos/u-boot.lds"

/* Always 128 KiB env size */
#define CONFIG_ENV_SIZE			(128 << 10)

/* Enhance our eMMC support / experience. */
#define CONFIG_CMD_GPT
#define CONFIG_EFI_PARTITION
#define CONFIG_PARTITION_UUIDS
#define CONFIG_CMD_PART

/* FIT support */
#define CONFIG_SYS_BOOTM_LEN         SZ_64M

/* UBI Support */
#define CONFIG_CMD_MTDPARTS
#define CONFIG_MTD_PARTITIONS
#define CONFIG_MTD_DEVICE
#define CONFIG_RBTREE
#define CONFIG_LZO
#define CONFIG_CMD_UBI
#define CONFIG_CMD_UBIFS

/* I2C configuration */
#undef CONFIG_SYS_OMAP24_I2C_SPEED
#define CONFIG_SYS_OMAP24_I2C_SPEED 1000

#undef CONFIG_SPL_OS_BOOT
#ifdef CONFIG_NAND
#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x00080000
#ifdef CONFIG_SPL_OS_BOOT
#define CONFIG_CMD_SPL_NAND_OFS 0x00080000 /* os parameters */
#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000 /* kernel offset */
#define CONFIG_CMD_SPL_WRITE_SIZE	0x2000
#endif
#define NANDARGS \
	"mtdids=" MTDIDS_DEFAULT "\0" \
	"mtdparts=" MTDPARTS_DEFAULT "\0" \
	"nandargs=setenv bootargs console=${console} " \
		"${optargs} " \
		"${mtdparts} " \
		"root=${nandroot} " \
		"rootfstype=${nandrootfstype}\0" \
	"nandroot=ubi0:rootfs rw ubi.mtd=5\0" \
	"nandrootfstype=ubifs rootwait=1\0" \
	"nandboot=echo Booting from nand ...; " \
		"run nandargs; " \
		"setenv loadaddr 0x84000000; " \
		"ubi part UBI; " \
		"ubifsmount ubi0:kernel; " \
		"ubifsload $loadaddr kernel-fit.itb;" \
		"ubifsumount; " \
		"bootm ${loadaddr}#conf${board_name}; " \
		"if test $? -ne 0; then echo Using default FIT config; " \
		"bootm ${loadaddr}; fi;\0"
#else
#define NANDARGS ""
#endif

#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG

#ifndef CONFIG_SPL_BUILD
#define CONFIG_EXTRA_ENV_SETTINGS \
	DEFAULT_LINUX_BOOT_ENV \
	"boot_fdt=try\0" \
	"bootpart=0:2\0" \
	"bootdir=/boot\0" \
	"bootfile=zImage\0" \
	"fdtfile=undefined\0" \
	"console=ttyO0,115200n8\0" \
	"partitions=" \
		"uuid_disk=${uuid_gpt_disk};" \
		"name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \
	"optargs=\0" \
	"mmcdev=0\0" \
	"mmcroot=/dev/mmcblk0p2 ro\0" \
	"mmcrootfstype=ext4 rootwait\0" \
	"rootpath=/export/rootfs\0" \
	"nfsopts=nolock\0" \
	"static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \
		"::off\0" \
	"ramroot=/dev/ram0 rw\0" \
	"ramrootfstype=ext2\0" \
	"mmcargs=setenv bootargs console=${console} " \
		"${optargs} " \
		"${mtdparts} " \
		"root=${mmcroot} " \
		"rootfstype=${mmcrootfstype}\0" \
	"spiroot=/dev/mtdblock4 rw\0" \
	"spirootfstype=jffs2\0" \
	"spisrcaddr=0xe0000\0" \
	"spiimgsize=0x362000\0" \
	"spibusno=0\0" \
	"spiargs=setenv bootargs console=${console} " \
		"${optargs} " \
		"root=${spiroot} " \
		"rootfstype=${spirootfstype}\0" \
	"netargs=setenv bootargs console=${console} " \
		"${optargs} " \
		"root=/dev/nfs " \
		"nfsroot=${serverip}:${rootpath},${nfsopts} rw " \
		"ip=dhcp\0" \
	"bootenv=uEnv.txt\0" \
	"loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
	"importbootenv=echo Importing environment from mmc ...; " \
		"env import -t $loadaddr $filesize\0" \
	"ramargs=setenv bootargs console=${console} " \
		"${optargs} " \
		"root=${ramroot} " \
		"rootfstype=${ramrootfstype}\0" \
	"loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
	"loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
	"loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
	"mmcloados=run mmcargs; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if run loadfdt; then " \
				"bootz ${loadaddr} - ${fdtaddr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootz; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootz; " \
		"fi;\0" \
	"mmcboot=mmc dev ${mmcdev}; " \
		"if mmc rescan; then " \
			"echo SD/MMC found on device ${mmcdev};" \
			"if run loadbootenv; then " \
				"echo Loaded environment from ${bootenv};" \
				"run importbootenv;" \
			"fi;" \
			"if test -n $uenvcmd; then " \
				"echo Running uenvcmd ...;" \
				"run uenvcmd;" \
			"fi;" \
			"if run loadimage; then " \
				"run mmcloados;" \
			"fi;" \
		"fi;\0" \
	"spiboot=echo Booting from spi ...; " \
		"run spiargs; " \
		"sf probe ${spibusno}:0; " \
		"sf read ${loadaddr} ${spisrcaddr} ${spiimgsize}; " \
		"bootz ${loadaddr}\0" \
	"netboot=echo Booting from network ...; " \
		"setenv autoload no; " \
		"dhcp; " \
		"tftp ${loadaddr} ${bootfile}; " \
		"tftp ${fdtaddr} ${fdtfile}; " \
		"run netargs; " \
		"bootz ${loadaddr} - ${fdtaddr}\0" \
	"ramboot=echo Booting from ramdisk ...; " \
		"run ramargs; " \
		"bootz ${loadaddr} ${rdaddr} ${fdtaddr}\0" \
	"findfdt=setenv fdtfile am335x-baltos.dtb\0" \
	NANDARGS
	/*DFUARGS*/
#endif

#define CONFIG_BOOTCOMMAND \
	"run findfdt; " \
	"run mmcboot;" \
	"setenv mmcdev 1; " \
	"setenv bootpart 1:2; " \
	"run mmcboot;" \
	"run nandboot;"


/* NS16550 Configuration */
#define CONFIG_SYS_NS16550_COM1		0x44e09000	/* Base EVM has UART0 */
#define CONFIG_SYS_NS16550_COM2		0x48022000	/* UART1 */
#define CONFIG_SYS_NS16550_COM3		0x48024000	/* UART2 */
#define CONFIG_SYS_NS16550_COM4		0x481a6000	/* UART3 */
#define CONFIG_SYS_NS16550_COM5		0x481a8000	/* UART4 */
#define CONFIG_SYS_NS16550_COM6		0x481aa000	/* UART5 */
#define CONFIG_BAUDRATE			115200

#define CONFIG_CMD_EEPROM
#define CONFIG_ENV_EEPROM_IS_ON_I2C
#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* Main EEPROM */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2

/* PMIC support */
#define CONFIG_POWER_TPS65910

/* SPL */
#ifndef CONFIG_NOR_BOOT
#define CONFIG_SPL_POWER_SUPPORT
#define CONFIG_SPL_YMODEM_SUPPORT

/* Bootcount using the RTC block */
#define CONFIG_BOOTCOUNT_LIMIT
#define CONFIG_BOOTCOUNT_AM33XX

/* USB gadget RNDIS */
/*#define CONFIG_SPL_MUSB_NEW_SUPPORT*/

/* General network SPL, both CPSW and USB gadget RNDIS */
/*#define CONFIG_SPL_NET_SUPPORT
#define CONFIG_SPL_ENV_SUPPORT
#define CONFIG_SPL_NET_VCI_STRING	"AM335x U-Boot SPL"*/

#define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/am33xx/u-boot-spl.lds"

#ifdef CONFIG_NAND
#define CONFIG_NAND_OMAP_GPMC
#define CONFIG_NAND_OMAP_GPMC_PREFETCH
#define CONFIG_NAND_OMAP_ELM
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_PAGE_COUNT	(CONFIG_SYS_NAND_BLOCK_SIZE / \
					 CONFIG_SYS_NAND_PAGE_SIZE)
#define CONFIG_SYS_NAND_PAGE_SIZE	2048
#define CONFIG_SYS_NAND_OOBSIZE		64
#define CONFIG_SYS_NAND_BLOCK_SIZE	(128*1024)
#define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
#define CONFIG_SYS_NAND_ECCPOS		{ 2, 3, 4, 5, 6, 7, 8, 9, \
					 10, 11, 12, 13, 14, 15, 16, 17, \
					 18, 19, 20, 21, 22, 23, 24, 25, \
					 26, 27, 28, 29, 30, 31, 32, 33, \
					 34, 35, 36, 37, 38, 39, 40, 41, \
					 42, 43, 44, 45, 46, 47, 48, 49, \
					 50, 51, 52, 53, 54, 55, 56, 57, }

#define CONFIG_SYS_NAND_ECCSIZE		512
#define CONFIG_SYS_NAND_ECCBYTES	14
#define CONFIG_SYS_NAND_ONFI_DETECTION
#define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH8_CODE_HW
#define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
#endif
#endif

/*
 * USB configuration.  We enable MUSB support, both for host and for
 * gadget.  We set USB0 as peripheral and USB1 as host, based on the
 * board schematic and physical port wired to each.  Then for host we
 * add mass storage support and for gadget we add both RNDIS ethernet
 * and DFU.
 */
#define CONFIG_USB_MUSB_DSPS
#define CONFIG_ARCH_MISC_INIT
#define CONFIG_USB_MUSB_GADGET
#define CONFIG_USB_MUSB_PIO_ONLY
#define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
#define CONFIG_USB_GADGET
#define CONFIG_USBDOWNLOAD_GADGET
#define CONFIG_USB_GADGET_DUALSPEED
#define CONFIG_USB_GADGET_VBUS_DRAW	2
#define CONFIG_USB_MUSB_HOST
#define CONFIG_AM335X_USB0
#define CONFIG_AM335X_USB0_MODE	MUSB_HOST
#define CONFIG_AM335X_USB1
#define CONFIG_AM335X_USB1_MODE MUSB_OTG

#ifdef CONFIG_USB_MUSB_HOST
#define CONFIG_CMD_USB
#define CONFIG_USB_STORAGE
#endif

#ifdef CONFIG_USB_MUSB_GADGET
#define CONFIG_USB_ETHER
#define CONFIG_USB_ETH_RNDIS
#define CONFIG_USBNET_HOST_ADDR	"de:ad:be:af:00:00"

/* USB TI's IDs */
#define CONFIG_G_DNL_VENDOR_NUM 0x0403
#define CONFIG_G_DNL_PRODUCT_NUM 0xBD00
#define CONFIG_G_DNL_MANUFACTURER "Texas Instruments"
#endif /* CONFIG_USB_MUSB_GADGET */

#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USBETH_SUPPORT)
/* disable host part of MUSB in SPL */
#undef CONFIG_USB_MUSB_HOST
/* disable EFI partitions and partition UUID support */
#undef CONFIG_PARTITION_UUIDS
#undef CONFIG_EFI_PARTITION
/*
 * Disable CPSW SPL support so we fit within the 101KiB limit.
 */
#undef CONFIG_SPL_ETH_SUPPORT
#endif

/* Network. */
#define CONFIG_PHY_GIGE
#define CONFIG_PHYLIB
#define CONFIG_PHY_ADDR			0
#define CONFIG_PHY_SMSC
#define CONFIG_MII
#define CONFIG_CMD_MII
#define CONFIG_PHY_ATHEROS

/* NAND support */
#ifdef CONFIG_NAND
#define CONFIG_CMD_NAND
#define GPMC_NAND_ECC_LP_x8_LAYOUT	1
#if !defined(CONFIG_SPI_BOOT) && !defined(CONFIG_NOR_BOOT)
#define MTDIDS_DEFAULT			"nand0=omap2-nand.0"
#define MTDPARTS_DEFAULT		"mtdparts=omap2-nand.0:128k(SPL)," \
					"128k(SPL.backup1)," \
					"128k(SPL.backup2)," \
					"128k(SPL.backup3)," \
					"1920k(u-boot)," \
					"-(UBI)"
#define CONFIG_ENV_IS_NOWHERE
#endif
#endif

#endif	/* ! __CONFIG_BALTOS_H */
Commit	Line	Data
6ce89324 YY	1	/*
	2	* am335x_evm.h
	3	*
	4	* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
	5	*
	6	* This program is free software; you can redistribute it and/or
	7	* modify it under the terms of the GNU General Public License as
	8	* published by the Free Software Foundation version 2.
	9	*
	10	* This program is distributed "as is" WITHOUT ANY WARRANTY of any
	11	* kind, whether express or implied; without even the implied warranty
	12	* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	13	* GNU General Public License for more details.
	14	*/
	15
	16	#ifndef __CONFIG_BALTOS_H
	17	#define __CONFIG_BALTOS_H
	18
5f9c58e9	19	#include <linux/sizes.h>
6ce89324 YY	20	#include <configs/ti_am335x_common.h>
	21
	22	#define MACH_TYPE_TIAM335EVM 3589 /* Until the next sync */
	23	#define CONFIG_MACH_TYPE MACH_TYPE_TIAM335EVM
	24	#define CONFIG_BOARD_LATE_INIT
	25
	26	/* Clock Defines */
	27	#define V_OSCK 24000000 /* Clock output from T2 */
	28	#define V_SCLK (V_OSCK)
	29
	30	/* Custom script for NOR */
	31	#define CONFIG_SYS_LDSCRIPT "board/vscom/baltos/u-boot.lds"
	32
	33	/* Always 128 KiB env size */
	34	#define CONFIG_ENV_SIZE (128 << 10)
	35
	36	/* Enhance our eMMC support / experience. */
	37	#define CONFIG_CMD_GPT
	38	#define CONFIG_EFI_PARTITION
	39	#define CONFIG_PARTITION_UUIDS
	40	#define CONFIG_CMD_PART
	41
	42	/* FIT support */
5f9c58e9	43	#define CONFIG_SYS_BOOTM_LEN SZ_64M
6ce89324 YY	44
	45	/* UBI Support */
	46	#define CONFIG_CMD_MTDPARTS
	47	#define CONFIG_MTD_PARTITIONS
	48	#define CONFIG_MTD_DEVICE
	49	#define CONFIG_RBTREE
	50	#define CONFIG_LZO
	51	#define CONFIG_CMD_UBI
	52	#define CONFIG_CMD_UBIFS
	53
	54	/* I2C configuration */
	55	#undef CONFIG_SYS_OMAP24_I2C_SPEED
e6b1b58b	56	#define CONFIG_SYS_OMAP24_I2C_SPEED 1000
6ce89324	57
5f9c58e9	58	#undef CONFIG_SPL_OS_BOOT
6ce89324	59	#ifdef CONFIG_NAND
5f9c58e9	60	#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x00080000
6ce89324 YY	61	#ifdef CONFIG_SPL_OS_BOOT
	62	#define CONFIG_CMD_SPL_NAND_OFS 0x00080000 /* os parameters */
	63	#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000 /* kernel offset */
	64	#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000
	65	#endif
	66	#define NANDARGS \
	67	"mtdids=" MTDIDS_DEFAULT "\0" \
	68	"mtdparts=" MTDPARTS_DEFAULT "\0" \
	69	"nandargs=setenv bootargs console=${console} " \
	70	"${optargs} " \
	71	"${mtdparts} " \
	72	"root=${nandroot} " \
	73	"rootfstype=${nandrootfstype}\0" \
	74	"nandroot=ubi0:rootfs rw ubi.mtd=5\0" \
	75	"nandrootfstype=ubifs rootwait=1\0" \
	76	"nandboot=echo Booting from nand ...; " \
	77	"run nandargs; " \
	78	"setenv loadaddr 0x84000000; " \
	79	"ubi part UBI; " \
	80	"ubifsmount ubi0:kernel; " \
	81	"ubifsload $loadaddr kernel-fit.itb;" \
	82	"ubifsumount; " \
5f9c58e9 YY	83	"bootm ${loadaddr}#conf${board_name}; " \
	84	"if test $? -ne 0; then echo Using default FIT config; " \
	85	"bootm ${loadaddr}; fi;\0"
6ce89324 YY	86	#else
	87	#define NANDARGS ""
	88	#endif
	89
	90	#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
	91
	92	#ifndef CONFIG_SPL_BUILD
	93	#define CONFIG_EXTRA_ENV_SETTINGS \
	94	DEFAULT_LINUX_BOOT_ENV \
	95	"boot_fdt=try\0" \
	96	"bootpart=0:2\0" \
	97	"bootdir=/boot\0" \
	98	"bootfile=zImage\0" \
	99	"fdtfile=undefined\0" \
	100	"console=ttyO0,115200n8\0" \
	101	"partitions=" \
	102	"uuid_disk=${uuid_gpt_disk};" \
	103	"name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \
	104	"optargs=\0" \
	105	"mmcdev=0\0" \
	106	"mmcroot=/dev/mmcblk0p2 ro\0" \
	107	"mmcrootfstype=ext4 rootwait\0" \
	108	"rootpath=/export/rootfs\0" \
	109	"nfsopts=nolock\0" \
	110	"static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \
	111	"::off\0" \
	112	"ramroot=/dev/ram0 rw\0" \
	113	"ramrootfstype=ext2\0" \
	114	"mmcargs=setenv bootargs console=${console} " \
	115	"${optargs} " \
	116	"${mtdparts} " \
	117	"root=${mmcroot} " \
	118	"rootfstype=${mmcrootfstype}\0" \
	119	"spiroot=/dev/mtdblock4 rw\0" \
	120	"spirootfstype=jffs2\0" \
	121	"spisrcaddr=0xe0000\0" \
	122	"spiimgsize=0x362000\0" \
	123	"spibusno=0\0" \
	124	"spiargs=setenv bootargs console=${console} " \
	125	"${optargs} " \
	126	"root=${spiroot} " \
	127	"rootfstype=${spirootfstype}\0" \
	128	"netargs=setenv bootargs console=${console} " \
	129	"${optargs} " \
	130	"root=/dev/nfs " \
	131	"nfsroot=${serverip}:${rootpath},${nfsopts} rw " \
	132	"ip=dhcp\0" \
	133	"bootenv=uEnv.txt\0" \
	134	"loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
	135	"importbootenv=echo Importing environment from mmc ...; " \
	136	"env import -t $loadaddr $filesize\0" \
	137	"ramargs=setenv bootargs console=${console} " \
	138	"${optargs} " \
	139	"root=${ramroot} " \
	140	"rootfstype=${ramrootfstype}\0" \
	141	"loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
	142	"loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
	143	"loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
	144	"mmcloados=run mmcargs; " \
	145	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	146	"if run loadfdt; then " \
	147	"bootz ${loadaddr} - ${fdtaddr}; " \
	148	"else " \
	149	"if test ${boot_fdt} = try; then " \
150	"bootz; " \
151	"else " \
152	"echo WARN: Cannot load the DT; " \
153	"fi; " \
154	"fi; " \
155	"else " \
156	"bootz; " \
157	"fi;\0" \
158	"mmcboot=mmc dev ${mmcdev}; " \
159	"if mmc rescan; then " \
160	"echo SD/MMC found on device ${mmcdev};" \
161	"if run loadbootenv; then " \
162	"echo Loaded environment from ${bootenv};" \
163	"run importbootenv;" \
164	"fi;" \
165	"if test -n $uenvcmd; then " \
166	"echo Running uenvcmd ...;" \
167	"run uenvcmd;" \
168	"fi;" \
169	"if run loadimage; then " \
170	"run mmcloados;" \
171	"fi;" \
172	"fi;\0" \
173	"spiboot=echo Booting from spi ...; " \
174	"run spiargs; " \
175	"sf probe ${spibusno}:0; " \
176	"sf read ${loadaddr} ${spisrcaddr} ${spiimgsize}; " \
177	"bootz ${loadaddr}\0" \
178	"netboot=echo Booting from network ...; " \
179	"setenv autoload no; " \
180	"dhcp; " \
181	"tftp ${loadaddr} ${bootfile}; " \
182	"tftp ${fdtaddr} ${fdtfile}; " \
183	"run netargs; " \
184	"bootz ${loadaddr} - ${fdtaddr}\0" \
185	"ramboot=echo Booting from ramdisk ...; " \
186	"run ramargs; " \
187	"bootz ${loadaddr} ${rdaddr} ${fdtaddr}\0" \
188	"findfdt=setenv fdtfile am335x-baltos.dtb\0" \
189	NANDARGS
190	/DFUARGS/
191	#endif
192
193	#define CONFIG_BOOTCOMMAND \
194	"run findfdt; " \
195	"run mmcboot;" \
196	"setenv mmcdev 1; " \
197	"setenv bootpart 1:2; " \
198	"run mmcboot;" \
199	"run nandboot;"
200
6ce89324 YY	201
	202	/* NS16550 Configuration */
	203	#define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */
	204	#define CONFIG_SYS_NS16550_COM2 0x48022000 /* UART1 */
	205	#define CONFIG_SYS_NS16550_COM3 0x48024000 /* UART2 */
	206	#define CONFIG_SYS_NS16550_COM4 0x481a6000 /* UART3 */
	207	#define CONFIG_SYS_NS16550_COM5 0x481a8000 /* UART4 */
	208	#define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */
	209	#define CONFIG_BAUDRATE 115200
	210
	211	#define CONFIG_CMD_EEPROM
	212	#define CONFIG_ENV_EEPROM_IS_ON_I2C
	213	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */
	214	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
6ce89324 YY	215
	216	/* PMIC support */
	217	#define CONFIG_POWER_TPS65910
	218
	219	/* SPL */
	220	#ifndef CONFIG_NOR_BOOT
	221	#define CONFIG_SPL_POWER_SUPPORT
	222	#define CONFIG_SPL_YMODEM_SUPPORT
	223
	224	/* Bootcount using the RTC block */
	225	#define CONFIG_BOOTCOUNT_LIMIT
	226	#define CONFIG_BOOTCOUNT_AM33XX
	227
	228	/* USB gadget RNDIS */
	229	/#define CONFIG_SPL_MUSB_NEW_SUPPORT/
	230
	231	/* General network SPL, both CPSW and USB gadget RNDIS */
	232	/*#define CONFIG_SPL_NET_SUPPORT
	233	#define CONFIG_SPL_ENV_SUPPORT
	234	#define CONFIG_SPL_NET_VCI_STRING "AM335x U-Boot SPL"*/
	235
	236	#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds"
	237
	238	#ifdef CONFIG_NAND
	239	#define CONFIG_NAND_OMAP_GPMC
5f9c58e9	240	#define CONFIG_NAND_OMAP_GPMC_PREFETCH
6ce89324 YY	241	#define CONFIG_NAND_OMAP_ELM
	242	#define CONFIG_SYS_NAND_5_ADDR_CYCLE
	243	#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \
	244	CONFIG_SYS_NAND_PAGE_SIZE)
	245	#define CONFIG_SYS_NAND_PAGE_SIZE 2048
	246	#define CONFIG_SYS_NAND_OOBSIZE 64
	247	#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
	248	#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
	249	#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
	250	10, 11, 12, 13, 14, 15, 16, 17, \
	251	18, 19, 20, 21, 22, 23, 24, 25, \
	252	26, 27, 28, 29, 30, 31, 32, 33, \
	253	34, 35, 36, 37, 38, 39, 40, 41, \
	254	42, 43, 44, 45, 46, 47, 48, 49, \
	255	50, 51, 52, 53, 54, 55, 56, 57, }
	256
	257	#define CONFIG_SYS_NAND_ECCSIZE 512
	258	#define CONFIG_SYS_NAND_ECCBYTES 14
	259	#define CONFIG_SYS_NAND_ONFI_DETECTION
	260	#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW
	261	#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
	262	#endif
	263	#endif
	264
	265	/*
	266	* USB configuration. We enable MUSB support, both for host and for
	267	* gadget. We set USB0 as peripheral and USB1 as host, based on the
	268	* board schematic and physical port wired to each. Then for host we
	269	* add mass storage support and for gadget we add both RNDIS ethernet
	270	* and DFU.
	271	*/
	272	#define CONFIG_USB_MUSB_DSPS
	273	#define CONFIG_ARCH_MISC_INIT
95de1e2f PK	274	#define CONFIG_USB_MUSB_GADGET
	275	#define CONFIG_USB_MUSB_PIO_ONLY
	276	#define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
6ce89324 YY	277	#define CONFIG_USB_GADGET
	278	#define CONFIG_USBDOWNLOAD_GADGET
	279	#define CONFIG_USB_GADGET_DUALSPEED
	280	#define CONFIG_USB_GADGET_VBUS_DRAW 2
95de1e2f	281	#define CONFIG_USB_MUSB_HOST
6ce89324	282	#define CONFIG_AM335X_USB0
5e5055f0	283	#define CONFIG_AM335X_USB0_MODE MUSB_HOST
6ce89324	284	#define CONFIG_AM335X_USB1
5e5055f0	285	#define CONFIG_AM335X_USB1_MODE MUSB_OTG
6ce89324	286
95de1e2f	287	#ifdef CONFIG_USB_MUSB_HOST
6ce89324 YY	288	#define CONFIG_CMD_USB
	289	#define CONFIG_USB_STORAGE
	290	#endif
	291
95de1e2f	292	#ifdef CONFIG_USB_MUSB_GADGET
6ce89324 YY	293	#define CONFIG_USB_ETHER
	294	#define CONFIG_USB_ETH_RNDIS
	295	#define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00"
	296
	297	/* USB TI's IDs */
	298	#define CONFIG_G_DNL_VENDOR_NUM 0x0403
	299	#define CONFIG_G_DNL_PRODUCT_NUM 0xBD00
	300	#define CONFIG_G_DNL_MANUFACTURER "Texas Instruments"
95de1e2f	301	#endif /* CONFIG_USB_MUSB_GADGET */
6ce89324 YY	302
	303	#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USBETH_SUPPORT)
	304	/* disable host part of MUSB in SPL */
95de1e2f	305	#undef CONFIG_USB_MUSB_HOST
6ce89324 YY	306	/* disable EFI partitions and partition UUID support */
	307	#undef CONFIG_PARTITION_UUIDS
	308	#undef CONFIG_EFI_PARTITION
	309	/*
	310	* Disable CPSW SPL support so we fit within the 101KiB limit.
	311	*/
	312	#undef CONFIG_SPL_ETH_SUPPORT
	313	#endif
	314
	315	/* Network. */
	316	#define CONFIG_PHY_GIGE
	317	#define CONFIG_PHYLIB
	318	#define CONFIG_PHY_ADDR 0
	319	#define CONFIG_PHY_SMSC
	320	#define CONFIG_MII
	321	#define CONFIG_CMD_MII
	322	#define CONFIG_PHY_ATHEROS
	323
	324	/* NAND support */
	325	#ifdef CONFIG_NAND
	326	#define CONFIG_CMD_NAND
	327	#define GPMC_NAND_ECC_LP_x8_LAYOUT 1
	328	#if !defined(CONFIG_SPI_BOOT) && !defined(CONFIG_NOR_BOOT)
	329	#define MTDIDS_DEFAULT "nand0=omap2-nand.0"
	330	#define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:128k(SPL)," \
	331	"128k(SPL.backup1)," \
	332	"128k(SPL.backup2)," \
	333	"128k(SPL.backup3)," \
	334	"1920k(u-boot)," \
	335	"-(UBI)"
	336	#define CONFIG_ENV_IS_NOWHERE
	337	#endif
	338	#endif
	339
	340	#endif /* ! __CONFIG_BALTOS_H */