[people/ms/u-boot.git] / include / configs / bcm_ep_board.h

/*
 * Copyright 2014 Broadcom Corporation.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __BCM_EP_BOARD_H
#define __BCM_EP_BOARD_H

#include <asm/arch/configs.h>

#define CONFIG_SKIP_LOWLEVEL_INIT

/*
 * Memory configuration
 * (these must be defined elsewhere)
 */
#ifndef CONFIG_SYS_TEXT_BASE
#error	CONFIG_SYS_TEXT_BASE must be defined!
#endif
#ifndef CONFIG_SYS_SDRAM_BASE
#error	CONFIG_SYS_SDRAM_BASE must be defined!
#endif
#ifndef CONFIG_SYS_SDRAM_SIZE
#error	CONFIG_SYS_SDRAM_SIZE must be defined!
#endif

#define CONFIG_NR_DRAM_BANKS		1

#define CONFIG_SYS_MALLOC_LEN		(4 * 1024 * 1024)
#define CONFIG_STACKSIZE		(256 * 1024)

/* Some commands use this as the default load address */
#define CONFIG_SYS_LOAD_ADDR		CONFIG_SYS_SDRAM_BASE

/*
 * This is the initial SP which is used only briefly for relocating the u-boot
 * image to the top of SDRAM. After relocation u-boot moves the stack to the
 * proper place.
 */
#define CONFIG_SYS_INIT_SP_ADDR		CONFIG_SYS_TEXT_BASE

/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE

/* Serial Info */
#define CONFIG_SYS_NS16550_SERIAL

#define CONFIG_BAUDRATE			115200

#define CONFIG_ENV_SIZE			0x2000
#define CONFIG_ENV_IS_NOWHERE

#define CONFIG_SYS_NO_FLASH	/* Not using NAND/NOR unmanaged flash */

/* console configuration */
#define CONFIG_SYS_CBSIZE		1024	/* Console buffer size */
#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
			sizeof(CONFIG_SYS_PROMPT) + 16)	/* Printbuffer size */
#define CONFIG_SYS_MAXARGS		64
#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE

/*
 * One partition type must be defined for part.c
 * This is necessary for the fatls command to work on an SD card
 * for example.
 */
#define CONFIG_DOS_PARTITION

/* version string, parser, etc */
#define CONFIG_AUTO_COMPLETE
#define CONFIG_CMDLINE_EDITING
#define CONFIG_COMMAND_HISTORY
#define CONFIG_SYS_LONGHELP

#define CONFIG_CRC32_VERIFY
#define CONFIG_MX_CYCLIC

/* Commands */
#define CONFIG_FAT_WRITE

/* SHA hashing */
#define CONFIG_CMD_HASH
#define CONFIG_HASH_VERIFY
#define CONFIG_SHA1
#define CONFIG_SHA256

/* Enable Time Command */

/* Misc utility code */
#define CONFIG_BOUNCE_BUFFER
#define CONFIG_CRC32_VERIFY

#endif /* __BCM_EP_BOARD_H */
Commit	Line	Data
da1f5ac2 SB	1	/*
	2	* Copyright 2014 Broadcom Corporation.
	3	*
	4	* SPDX-License-Identifier: GPL-2.0+
	5	*/
	6
	7	#ifndef __BCM_EP_BOARD_H
	8	#define __BCM_EP_BOARD_H
	9
	10	#include <asm/arch/configs.h>
	11
da1f5ac2 SB	12	#define CONFIG_SKIP_LOWLEVEL_INIT
da1f5ac2 SB	13
da1f5ac2 SB	14	/*
	15	* Memory configuration
	16	* (these must be defined elsewhere)
	17	*/
	18	#ifndef CONFIG_SYS_TEXT_BASE
	19	#error CONFIG_SYS_TEXT_BASE must be defined!
	20	#endif
	21	#ifndef CONFIG_SYS_SDRAM_BASE
	22	#error CONFIG_SYS_SDRAM_BASE must be defined!
	23	#endif
	24	#ifndef CONFIG_SYS_SDRAM_SIZE
	25	#error CONFIG_SYS_SDRAM_SIZE must be defined!
	26	#endif
	27
	28	#define CONFIG_NR_DRAM_BANKS 1
	29
	30	#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
	31	#define CONFIG_STACKSIZE (256 * 1024)
	32
	33	/* Some commands use this as the default load address */
	34	#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE
	35
da1f5ac2 SB	36	/*
	37	* This is the initial SP which is used only briefly for relocating the u-boot
	38	* image to the top of SDRAM. After relocation u-boot moves the stack to the
	39	* proper place.
	40	*/
	41	#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE
	42
	43	/* allow to overwrite serial and ethaddr */
	44	#define CONFIG_ENV_OVERWRITE
	45
	46	/* Serial Info */
da1f5ac2 SB	47	#define CONFIG_SYS_NS16550_SERIAL
	48
	49	#define CONFIG_BAUDRATE 115200
	50
	51	#define CONFIG_ENV_SIZE 0x2000
	52	#define CONFIG_ENV_IS_NOWHERE
	53
	54	#define CONFIG_SYS_NO_FLASH /* Not using NAND/NOR unmanaged flash */
	55
	56	/* console configuration */
	57	#define CONFIG_SYS_CBSIZE 1024 /* Console buffer size */
	58	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
	59	sizeof(CONFIG_SYS_PROMPT) + 16) /* Printbuffer size */
	60	#define CONFIG_SYS_MAXARGS 64
	61	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
	62
	63	/*
	64	* One partition type must be defined for part.c
	65	* This is necessary for the fatls command to work on an SD card
	66	* for example.
	67	*/
	68	#define CONFIG_DOS_PARTITION
	69
	70	/* version string, parser, etc */
da1f5ac2	71	#define CONFIG_AUTO_COMPLETE
da1f5ac2 SB	72	#define CONFIG_CMDLINE_EDITING
	73	#define CONFIG_COMMAND_HISTORY
	74	#define CONFIG_SYS_LONGHELP
	75
	76	#define CONFIG_CRC32_VERIFY
	77	#define CONFIG_MX_CYCLIC
	78
	79	/* Commands */
da1f5ac2 SB	80	#define CONFIG_FAT_WRITE
da1f5ac2 SB	81
da1f5ac2 SB	82	/* SHA hashing */
	83	#define CONFIG_CMD_HASH
	84	#define CONFIG_HASH_VERIFY
	85	#define CONFIG_SHA1
	86	#define CONFIG_SHA256
	87
	88	/* Enable Time Command */
da1f5ac2	89
da1f5ac2 SB	90	/* Misc utility code */
	91	#define CONFIG_BOUNCE_BUFFER
	92	#define CONFIG_CRC32_VERIFY
	93
	94	#endif /* __BCM_EP_BOARD_H */