]> git.ipfire.org Git - people/ms/u-boot.git/blame - include/configs/bcm_ep_board.h
Move defaults from config_cmd_default.h to Kconfig
[people/ms/u-boot.git] / include / configs / bcm_ep_board.h
CommitLineData
da1f5ac2
SB
1/*
2 * Copyright 2014 Broadcom Corporation.
3 *
4 * SPDX-License-Identifier: GPL-2.0+
5 */
6
7#ifndef __BCM_EP_BOARD_H
8#define __BCM_EP_BOARD_H
9
10#include <asm/arch/configs.h>
11
da1f5ac2
SB
12#define CONFIG_SKIP_LOWLEVEL_INIT
13
14#define CONFIG_SYS_GENERIC_BOARD
15
16/*
17 * Memory configuration
18 * (these must be defined elsewhere)
19 */
20#ifndef CONFIG_SYS_TEXT_BASE
21#error CONFIG_SYS_TEXT_BASE must be defined!
22#endif
23#ifndef CONFIG_SYS_SDRAM_BASE
24#error CONFIG_SYS_SDRAM_BASE must be defined!
25#endif
26#ifndef CONFIG_SYS_SDRAM_SIZE
27#error CONFIG_SYS_SDRAM_SIZE must be defined!
28#endif
29
30#define CONFIG_NR_DRAM_BANKS 1
31
32#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
33#define CONFIG_STACKSIZE (256 * 1024)
34
35/* Some commands use this as the default load address */
36#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE
37
da1f5ac2
SB
38/*
39 * This is the initial SP which is used only briefly for relocating the u-boot
40 * image to the top of SDRAM. After relocation u-boot moves the stack to the
41 * proper place.
42 */
43#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE
44
45/* allow to overwrite serial and ethaddr */
46#define CONFIG_ENV_OVERWRITE
47
48/* Serial Info */
49#define CONFIG_SYS_NS16550
50#define CONFIG_SYS_NS16550_SERIAL
51
52#define CONFIG_BAUDRATE 115200
53
54#define CONFIG_ENV_SIZE 0x2000
55#define CONFIG_ENV_IS_NOWHERE
56
57#define CONFIG_SYS_NO_FLASH /* Not using NAND/NOR unmanaged flash */
58
59/* console configuration */
60#define CONFIG_SYS_CBSIZE 1024 /* Console buffer size */
61#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
62 sizeof(CONFIG_SYS_PROMPT) + 16) /* Printbuffer size */
63#define CONFIG_SYS_MAXARGS 64
64#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
65
66/*
67 * One partition type must be defined for part.c
68 * This is necessary for the fatls command to work on an SD card
69 * for example.
70 */
71#define CONFIG_DOS_PARTITION
72
73/* version string, parser, etc */
74#define CONFIG_VERSION_VARIABLE
75#define CONFIG_AUTO_COMPLETE
76#define CONFIG_SYS_HUSH_PARSER
77#define CONFIG_CMDLINE_EDITING
78#define CONFIG_COMMAND_HISTORY
79#define CONFIG_SYS_LONGHELP
80
81#define CONFIG_CRC32_VERIFY
82#define CONFIG_MX_CYCLIC
83
84/* Commands */
da1f5ac2
SB
85#define CONFIG_CMD_ASKENV
86#define CONFIG_CMD_CACHE
87#define CONFIG_CMD_FAT
88#define CONFIG_FAT_WRITE
89
90/* Enable devicetree support */
91#define CONFIG_OF_LIBFDT
92
93/* SHA hashing */
94#define CONFIG_CMD_HASH
95#define CONFIG_HASH_VERIFY
96#define CONFIG_SHA1
97#define CONFIG_SHA256
98
99/* Enable Time Command */
100#define CONFIG_CMD_TIME
101
102#define CONFIG_CMD_BOOTZ
103
104/* Misc utility code */
105#define CONFIG_BOUNCE_BUFFER
106#define CONFIG_CRC32_VERIFY
107
108#endif /* __BCM_EP_BOARD_H */