]>
Commit | Line | Data |
---|---|---|
0c31ddf7 | 1 | /* |
a187559e | 2 | * U-Boot - Configuration file for BF526 EZBrd board |
0c31ddf7 MF |
3 | */ |
4 | ||
5 | #ifndef __CONFIG_BF526_EZBRD_H__ | |
6 | #define __CONFIG_BF526_EZBRD_H__ | |
7 | ||
f348ab85 | 8 | #include <asm/config-pre.h> |
0c31ddf7 | 9 | |
0c31ddf7 MF |
10 | /* |
11 | * Processor Settings | |
12 | */ | |
fbcf8e8c | 13 | #define CONFIG_BFIN_CPU bf526-0.0 |
0c31ddf7 MF |
14 | #define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_PARA |
15 | ||
0c31ddf7 MF |
16 | /* |
17 | * Clock Settings | |
18 | * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV | |
19 | * SCLK = (CLKIN * VCO_MULT) / SCLK_DIV | |
20 | */ | |
21 | /* CONFIG_CLKIN_HZ is any value in Hz */ | |
22 | #define CONFIG_CLKIN_HZ 25000000 | |
23 | /* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */ | |
24 | /* 1 = CLKIN / 2 */ | |
25 | #define CONFIG_CLKIN_HALF 0 | |
26 | /* PLL_BYPASS controls the BYPASS bit in PLL_CTL 0 = do not bypass */ | |
27 | /* 1 = bypass PLL */ | |
28 | #define CONFIG_PLL_BYPASS 0 | |
29 | /* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */ | |
30 | /* Values can range from 0-63 (where 0 means 64) */ | |
31 | #define CONFIG_VCO_MULT 16 | |
32 | /* CCLK_DIV controls the core clock divider */ | |
33 | /* Values can be 1, 2, 4, or 8 ONLY */ | |
34 | #define CONFIG_CCLK_DIV 1 | |
35 | /* SCLK_DIV controls the system clock divider */ | |
36 | /* Values can range from 1-15 */ | |
37 | #define CONFIG_SCLK_DIV 5 | |
38 | ||
0c31ddf7 MF |
39 | /* |
40 | * Memory Settings | |
41 | */ | |
42 | /* This board has a 64meg MT48H32M16 */ | |
43 | #define CONFIG_MEM_ADD_WDTH 10 | |
44 | #define CONFIG_MEM_SIZE 64 | |
45 | ||
46 | #define CONFIG_EBIU_SDRRC_VAL 0x0267 | |
47 | #define CONFIG_EBIU_SDGCTL_VAL (SCTLE | CL_2 | PASR_ALL | TRAS_6 | TRP_4 | TRCD_2 | TWR_2 | PSS) | |
48 | ||
49 | #define CONFIG_EBIU_AMGCTL_VAL (AMCKEN | AMBEN_ALL) | |
50 | #define CONFIG_EBIU_AMBCTL0_VAL (B1WAT_15 | B1RAT_15 | B1HT_3 | B1RDYPOL | B0WAT_15 | B0RAT_15 | B0HT_3 | B0RDYPOL) | |
51 | #define CONFIG_EBIU_AMBCTL1_VAL (B3WAT_15 | B3RAT_15 | B3HT_3 | B3RDYPOL | B2WAT_15 | B2RAT_15 | B2HT_3 | B2RDYPOL) | |
52 | ||
301e66a9 | 53 | #define CONFIG_SYS_MONITOR_LEN (768 * 1024) |
0c31ddf7 MF |
54 | #define CONFIG_SYS_MALLOC_LEN (512 * 1024) |
55 | ||
0c31ddf7 MF |
56 | /* |
57 | * NAND Settings | |
58 | * (can't be used same time as ethernet) | |
59 | */ | |
60 | #if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_NAND) | |
301e66a9 MF |
61 | # define CONFIG_BFIN_NFC |
62 | # define CONFIG_BFIN_NFC_BOOTROM_ECC | |
0c31ddf7 MF |
63 | #endif |
64 | #ifdef CONFIG_BFIN_NFC | |
65 | #define CONFIG_BFIN_NFC_CTL_VAL 0x0033 | |
66 | #define CONFIG_DRIVER_NAND_BFIN | |
67 | #define CONFIG_SYS_NAND_BASE 0 /* not actually used */ | |
68 | #define CONFIG_SYS_MAX_NAND_DEVICE 1 | |
0c31ddf7 MF |
69 | #define CONFIG_CMD_NAND |
70 | #endif | |
71 | ||
0c31ddf7 MF |
72 | /* |
73 | * Network Settings | |
74 | */ | |
75 | #if !defined(__ADSPBF522__) && !defined(__ADSPBF523__) && \ | |
76 | !defined(__ADSPBF524__) && !defined(__ADSPBF525__) && !defined(CONFIG_BFIN_NFC) | |
77 | #define ADI_CMDS_NETWORK 1 | |
78 | #define CONFIG_BFIN_MAC | |
79 | #define CONFIG_RMII | |
80 | #define CONFIG_NETCONSOLE 1 | |
0c31ddf7 MF |
81 | #endif |
82 | #define CONFIG_HOSTNAME bf526-ezbrd | |
0c31ddf7 MF |
83 | |
84 | /* | |
85 | * Flash Settings | |
86 | */ | |
87 | #define CONFIG_FLASH_CFI_DRIVER | |
88 | #define CONFIG_SYS_FLASH_BASE 0x20000000 | |
89 | #define CONFIG_SYS_FLASH_CFI | |
90 | #define CONFIG_SYS_FLASH_PROTECTION | |
91 | #define CONFIG_SYS_MAX_FLASH_BANKS 1 | |
92 | #define CONFIG_SYS_MAX_FLASH_SECT 71 | |
93 | ||
0c31ddf7 MF |
94 | /* |
95 | * SPI Settings | |
96 | */ | |
97 | #define CONFIG_BFIN_SPI | |
98 | #define CONFIG_ENV_SPI_MAX_HZ 30000000 | |
afac8b07 | 99 | #define CONFIG_SF_DEFAULT_SPEED 30000000 |
0c31ddf7 | 100 | |
0c31ddf7 MF |
101 | /* |
102 | * Env Storage Settings | |
103 | */ | |
104 | #if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER) | |
105 | #define CONFIG_ENV_IS_IN_SPI_FLASH | |
106 | #define CONFIG_ENV_OFFSET 0x4000 | |
107 | #define CONFIG_ENV_SIZE 0x2000 | |
108 | #define CONFIG_ENV_SECT_SIZE 0x2000 | |
109 | #else | |
110 | #define CONFIG_ENV_IS_IN_FLASH | |
111 | #define CONFIG_ENV_OFFSET 0x4000 | |
112 | #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET) | |
113 | #define CONFIG_ENV_SIZE 0x2000 | |
114 | #define CONFIG_ENV_SECT_SIZE 0x2000 | |
115 | #endif | |
76d82187 | 116 | #define CONFIG_ENV_IS_EMBEDDED_IN_LDR |
0c31ddf7 | 117 | |
0c31ddf7 MF |
118 | /* |
119 | * I2C Settings | |
120 | */ | |
c469703b | 121 | #define CONFIG_SYS_I2C |
fea9b69a | 122 | #define CONFIG_SYS_I2C_ADI |
0c31ddf7 | 123 | |
0c31ddf7 MF |
124 | /* |
125 | * USB Settings | |
126 | */ | |
127 | #if !defined(__ADSPBF522__) && !defined(__ADSPBF523__) | |
95de1e2f | 128 | #define CONFIG_USB_MUSB_HCD |
0c31ddf7 | 129 | #define CONFIG_USB_BLACKFIN |
95de1e2f | 130 | #define CONFIG_USB_MUSB_TIMEOUT 100000 |
0c31ddf7 MF |
131 | #endif |
132 | ||
0c31ddf7 MF |
133 | /* |
134 | * Misc Settings | |
135 | */ | |
136 | #define CONFIG_MISC_INIT_R | |
137 | #define CONFIG_RTC_BFIN | |
138 | #define CONFIG_UART_CONSOLE 1 | |
139 | ||
140 | /* define to enable run status via led */ | |
0c31ddf7 | 141 | |
0c31ddf7 MF |
142 | /* |
143 | * Pull in common ADI header for remaining command/environment setup | |
144 | */ | |
145 | #include <configs/bfin_adi_common.h> | |
146 | ||
0c31ddf7 | 147 | #endif |