[people/ms/u-boot.git] / include / configs / bf526-ezbrd.h

/*
 * U-boot - Configuration file for BF526 EZBrd board
 */

#ifndef __CONFIG_BF526_EZBRD_H__
#define __CONFIG_BF526_EZBRD_H__

#include <asm/config-pre.h>


/*
 * Processor Settings
 */
#define CONFIG_BFIN_CPU             bf526-0.0
#define CONFIG_BFIN_BOOT_MODE       BFIN_BOOT_PARA


/*
 * Clock Settings
 *	CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
 *	SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
 */
/* CONFIG_CLKIN_HZ is any value in Hz					*/
#define CONFIG_CLKIN_HZ			25000000
/* CLKIN_HALF controls the DF bit in PLL_CTL      0 = CLKIN		*/
/*                                                1 = CLKIN / 2		*/
#define CONFIG_CLKIN_HALF		0
/* PLL_BYPASS controls the BYPASS bit in PLL_CTL  0 = do not bypass	*/
/*                                                1 = bypass PLL	*/
#define CONFIG_PLL_BYPASS		0
/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL		*/
/* Values can range from 0-63 (where 0 means 64)			*/
#define CONFIG_VCO_MULT			16
/* CCLK_DIV controls the core clock divider				*/
/* Values can be 1, 2, 4, or 8 ONLY					*/
#define CONFIG_CCLK_DIV			1
/* SCLK_DIV controls the system clock divider				*/
/* Values can range from 1-15						*/
#define CONFIG_SCLK_DIV			5


/*
 * Memory Settings
 */
/* This board has a 64meg MT48H32M16 */
#define CONFIG_MEM_ADD_WDTH	10
#define CONFIG_MEM_SIZE		64

#define CONFIG_EBIU_SDRRC_VAL	0x0267
#define CONFIG_EBIU_SDGCTL_VAL	(SCTLE | CL_2 | PASR_ALL | TRAS_6 | TRP_4 | TRCD_2 | TWR_2 | PSS)

#define CONFIG_EBIU_AMGCTL_VAL	(AMCKEN | AMBEN_ALL)
#define CONFIG_EBIU_AMBCTL0_VAL	(B1WAT_15 | B1RAT_15 | B1HT_3 | B1RDYPOL | B0WAT_15 | B0RAT_15 | B0HT_3 | B0RDYPOL)
#define CONFIG_EBIU_AMBCTL1_VAL	(B3WAT_15 | B3RAT_15 | B3HT_3 | B3RDYPOL | B2WAT_15 | B2RAT_15 | B2HT_3 | B2RDYPOL)

#define CONFIG_SYS_MONITOR_LEN	(768 * 1024)
#define CONFIG_SYS_MALLOC_LEN	(512 * 1024)


/*
 * NAND Settings
 * (can't be used same time as ethernet)
 */
#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_NAND)
# define CONFIG_BFIN_NFC
# define CONFIG_BFIN_NFC_BOOTROM_ECC
#endif
#ifdef CONFIG_BFIN_NFC
#define CONFIG_BFIN_NFC_CTL_VAL	0x0033
#define CONFIG_DRIVER_NAND_BFIN
#define CONFIG_SYS_NAND_BASE		0 /* not actually used */
#define CONFIG_SYS_MAX_NAND_DEVICE	1
#define CONFIG_CMD_NAND
#endif


/*
 * Network Settings
 */
#if !defined(__ADSPBF522__) && !defined(__ADSPBF523__) && \
    !defined(__ADSPBF524__) && !defined(__ADSPBF525__) && !defined(CONFIG_BFIN_NFC)
#define ADI_CMDS_NETWORK	1
#define CONFIG_BFIN_MAC
#define CONFIG_RMII
#define CONFIG_NETCONSOLE	1
#endif
#define CONFIG_HOSTNAME		bf526-ezbrd

/*
 * Flash Settings
 */
#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_FLASH_BASE		0x20000000
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_SYS_FLASH_PROTECTION
#define CONFIG_SYS_MAX_FLASH_BANKS	1
#define CONFIG_SYS_MAX_FLASH_SECT	71


/*
 * SPI Settings
 */
#define CONFIG_BFIN_SPI
#define CONFIG_ENV_SPI_MAX_HZ	30000000
#define CONFIG_SF_DEFAULT_SPEED	30000000


/*
 * Env Storage Settings
 */
#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER)
#define CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_ENV_OFFSET	0x4000
#define CONFIG_ENV_SIZE		0x2000
#define CONFIG_ENV_SECT_SIZE	0x2000
#else
#define CONFIG_ENV_IS_IN_FLASH
#define CONFIG_ENV_OFFSET	0x4000
#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
#define CONFIG_ENV_SIZE		0x2000
#define CONFIG_ENV_SECT_SIZE	0x2000
#endif
#define CONFIG_ENV_IS_EMBEDDED_IN_LDR


/*
 * I2C Settings
 */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_ADI


/*
 * USB Settings
 */
#if !defined(__ADSPBF522__) && !defined(__ADSPBF523__)
#define CONFIG_USB
#define CONFIG_USB_MUSB_HCD
#define CONFIG_USB_BLACKFIN
#define CONFIG_USB_STORAGE
#define CONFIG_USB_MUSB_TIMEOUT 100000
#endif


/*
 * Misc Settings
 */
#define CONFIG_MISC_INIT_R
#define CONFIG_RTC_BFIN
#define CONFIG_UART_CONSOLE	1

/* define to enable run status via led */
/* #define CONFIG_STATUS_LED */
#ifdef CONFIG_STATUS_LED
#define CONFIG_GPIO_LED
#define CONFIG_BOARD_SPECIFIC_LED
/* use LED0 to indicate booting/alive */
#define STATUS_LED_BOOT 0
#define STATUS_LED_BIT GPIO_PF8
#define STATUS_LED_STATE STATUS_LED_ON
#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 4)
/* use LED1 to indicate crash */
#define STATUS_LED_CRASH 1
#define STATUS_LED_BIT1 GPIO_PG11
#define STATUS_LED_STATE1 STATUS_LED_ON
#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2)
/* #define STATUS_LED_BIT2 GPIO_PG12 */
#endif


/*
 * Pull in common ADI header for remaining command/environment setup
 */
#include <configs/bfin_adi_common.h>

#endif
Commit	Line	Data
0c31ddf7 MF	1	/*
	2	* U-boot - Configuration file for BF526 EZBrd board
	3	*/
	4
	5	#ifndef __CONFIG_BF526_EZBRD_H__
	6	#define __CONFIG_BF526_EZBRD_H__
	7
f348ab85	8	#include <asm/config-pre.h>
0c31ddf7 MF	9
	10
	11	/*
	12	* Processor Settings
	13	*/
fbcf8e8c	14	#define CONFIG_BFIN_CPU bf526-0.0
0c31ddf7 MF	15	#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_PARA
	16
	17
	18	/*
	19	* Clock Settings
	20	* CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
	21	* SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
	22	*/
	23	/* CONFIG_CLKIN_HZ is any value in Hz */
	24	#define CONFIG_CLKIN_HZ 25000000
	25	/* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */
	26	/* 1 = CLKIN / 2 */
	27	#define CONFIG_CLKIN_HALF 0
	28	/* PLL_BYPASS controls the BYPASS bit in PLL_CTL 0 = do not bypass */
	29	/* 1 = bypass PLL */
	30	#define CONFIG_PLL_BYPASS 0
	31	/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */
	32	/* Values can range from 0-63 (where 0 means 64) */
	33	#define CONFIG_VCO_MULT 16
	34	/* CCLK_DIV controls the core clock divider */
	35	/* Values can be 1, 2, 4, or 8 ONLY */
	36	#define CONFIG_CCLK_DIV 1
	37	/* SCLK_DIV controls the system clock divider */
	38	/* Values can range from 1-15 */
	39	#define CONFIG_SCLK_DIV 5
	40
	41
	42	/*
	43	* Memory Settings
	44	*/
	45	/* This board has a 64meg MT48H32M16 */
	46	#define CONFIG_MEM_ADD_WDTH 10
	47	#define CONFIG_MEM_SIZE 64
	48
	49	#define CONFIG_EBIU_SDRRC_VAL 0x0267
	50	#define CONFIG_EBIU_SDGCTL_VAL (SCTLE \| CL_2 \| PASR_ALL \| TRAS_6 \| TRP_4 \| TRCD_2 \| TWR_2 \| PSS)
	51
	52	#define CONFIG_EBIU_AMGCTL_VAL (AMCKEN \| AMBEN_ALL)
	53	#define CONFIG_EBIU_AMBCTL0_VAL (B1WAT_15 \| B1RAT_15 \| B1HT_3 \| B1RDYPOL \| B0WAT_15 \| B0RAT_15 \| B0HT_3 \| B0RDYPOL)
	54	#define CONFIG_EBIU_AMBCTL1_VAL (B3WAT_15 \| B3RAT_15 \| B3HT_3 \| B3RDYPOL \| B2WAT_15 \| B2RAT_15 \| B2HT_3 \| B2RDYPOL)
	55
301e66a9	56	#define CONFIG_SYS_MONITOR_LEN (768 * 1024)
0c31ddf7 MF	57	#define CONFIG_SYS_MALLOC_LEN (512 * 1024)
	58
	59
	60	/*
	61	* NAND Settings
	62	* (can't be used same time as ethernet)
	63	*/
	64	#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_NAND)
301e66a9 MF	65	# define CONFIG_BFIN_NFC
301e66a9 MF	66	# define CONFIG_BFIN_NFC_BOOTROM_ECC
0c31ddf7 MF	67	#endif
	68	#ifdef CONFIG_BFIN_NFC
	69	#define CONFIG_BFIN_NFC_CTL_VAL 0x0033
	70	#define CONFIG_DRIVER_NAND_BFIN
	71	#define CONFIG_SYS_NAND_BASE 0 /* not actually used */
	72	#define CONFIG_SYS_MAX_NAND_DEVICE 1
0c31ddf7 MF	73	#define CONFIG_CMD_NAND
	74	#endif
	75
	76
	77	/*
	78	* Network Settings
	79	*/
	80	#if !defined(__ADSPBF522__) && !defined(__ADSPBF523__) && \
	81	!defined(__ADSPBF524__) && !defined(__ADSPBF525__) && !defined(CONFIG_BFIN_NFC)
	82	#define ADI_CMDS_NETWORK 1
	83	#define CONFIG_BFIN_MAC
	84	#define CONFIG_RMII
	85	#define CONFIG_NETCONSOLE 1
0c31ddf7 MF	86	#endif
0c31ddf7 MF	87	#define CONFIG_HOSTNAME bf526-ezbrd
0c31ddf7 MF	88
	89	/*
	90	* Flash Settings
	91	*/
	92	#define CONFIG_FLASH_CFI_DRIVER
	93	#define CONFIG_SYS_FLASH_BASE 0x20000000
	94	#define CONFIG_SYS_FLASH_CFI
	95	#define CONFIG_SYS_FLASH_PROTECTION
	96	#define CONFIG_SYS_MAX_FLASH_BANKS 1
	97	#define CONFIG_SYS_MAX_FLASH_SECT 71
	98
	99
	100	/*
	101	* SPI Settings
	102	*/
	103	#define CONFIG_BFIN_SPI
	104	#define CONFIG_ENV_SPI_MAX_HZ 30000000
afac8b07	105	#define CONFIG_SF_DEFAULT_SPEED 30000000
0c31ddf7 MF	106
	107
	108	/*
	109	* Env Storage Settings
	110	*/
	111	#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER)
	112	#define CONFIG_ENV_IS_IN_SPI_FLASH
	113	#define CONFIG_ENV_OFFSET 0x4000
	114	#define CONFIG_ENV_SIZE 0x2000
	115	#define CONFIG_ENV_SECT_SIZE 0x2000
	116	#else
	117	#define CONFIG_ENV_IS_IN_FLASH
	118	#define CONFIG_ENV_OFFSET 0x4000
	119	#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
	120	#define CONFIG_ENV_SIZE 0x2000
	121	#define CONFIG_ENV_SECT_SIZE 0x2000
	122	#endif
76d82187	123	#define CONFIG_ENV_IS_EMBEDDED_IN_LDR
0c31ddf7 MF	124
	125
	126	/*
	127	* I2C Settings
	128	*/
c469703b	129	#define CONFIG_SYS_I2C
fea9b69a	130	#define CONFIG_SYS_I2C_ADI
0c31ddf7 MF	131
	132
	133	/*
	134	* USB Settings
	135	*/
	136	#if !defined(__ADSPBF522__) && !defined(__ADSPBF523__)
	137	#define CONFIG_USB
95de1e2f	138	#define CONFIG_USB_MUSB_HCD
0c31ddf7 MF	139	#define CONFIG_USB_BLACKFIN
0c31ddf7 MF	140	#define CONFIG_USB_STORAGE
95de1e2f	141	#define CONFIG_USB_MUSB_TIMEOUT 100000
0c31ddf7 MF	142	#endif
	143
	144
	145	/*
	146	* Misc Settings
	147	*/
	148	#define CONFIG_MISC_INIT_R
	149	#define CONFIG_RTC_BFIN
	150	#define CONFIG_UART_CONSOLE 1
	151
	152	/* define to enable run status via led */
	153	/* #define CONFIG_STATUS_LED */
	154	#ifdef CONFIG_STATUS_LED
a84774f5	155	#define CONFIG_GPIO_LED
0c31ddf7	156	#define CONFIG_BOARD_SPECIFIC_LED
0c31ddf7 MF	157	/* use LED0 to indicate booting/alive */
0c31ddf7 MF	158	#define STATUS_LED_BOOT 0
a84774f5	159	#define STATUS_LED_BIT GPIO_PF8
0c31ddf7 MF	160	#define STATUS_LED_STATE STATUS_LED_ON
	161	#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 4)
	162	/* use LED1 to indicate crash */
	163	#define STATUS_LED_CRASH 1
a84774f5	164	#define STATUS_LED_BIT1 GPIO_PG11
0c31ddf7 MF	165	#define STATUS_LED_STATE1 STATUS_LED_ON
0c31ddf7 MF	166	#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2)
a84774f5	167	/* #define STATUS_LED_BIT2 GPIO_PG12 */
0c31ddf7 MF	168	#endif
	169
	170
	171	/*
	172	* Pull in common ADI header for remaining command/environment setup
	173	*/
	174	#include <configs/bfin_adi_common.h>
	175
0c31ddf7	176	#endif