]> git.ipfire.org Git - people/ms/u-boot.git/blame - include/configs/bf537-minotaur.h
Merge branch 'master' of git://git.denx.de/u-boot-usb
[people/ms/u-boot.git] / include / configs / bf537-minotaur.h
CommitLineData
d7fdc141
MF
1/*
2 * U-boot - Configuration file for CSP Minotaur board
3 *
4 * Thu Oct 25 15:30:44 CEST 2007 <hackfin@section5.ch>
5 * Minotaur config, brushed up for official uClinux dist.
6 * Parallel flash support disabled, SPI flash boot command
7 * added ('run flashboot').
8 *
9 * Flash image map:
10 *
11 * 0x00000000 u-boot bootstrap
12 * 0x00010000 environment
13 * 0x00020000 u-boot code
14 * 0x00030000 uImage.initramfs
15 *
16 */
17
18#ifndef __CONFIG_BF537_MINOTAUR_H__
19#define __CONFIG_BF537_MINOTAUR_H__
20
f348ab85 21#include <asm/config-pre.h>
d7fdc141
MF
22
23
24/*
25 * Processor Settings
26 */
fbcf8e8c 27#define CONFIG_BFIN_CPU bf537-0.2
d7fdc141
MF
28#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_SPI_MASTER
29
30
31/*
32 * Clock Settings
33 * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
34 * SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
35 */
36/* CONFIG_CLKIN_HZ is any value in Hz */
37#define CONFIG_CLKIN_HZ 25000000
38/* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */
39/* 1 = CLKIN / 2 */
40#define CONFIG_CLKIN_HALF 0
41/* PLL_BYPASS controls the BYPASS bit in PLL_CTL 0 = do not bypass */
42/* 1 = bypass PLL */
43#define CONFIG_PLL_BYPASS 0
44/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */
45/* Values can range from 0-63 (where 0 means 64) */
46#define CONFIG_VCO_MULT 20
47/* CCLK_DIV controls the core clock divider */
48/* Values can be 1, 2, 4, or 8 ONLY */
49#define CONFIG_CCLK_DIV 1
50/* SCLK_DIV controls the system clock divider */
51/* Values can range from 1-15 */
52#define CONFIG_SCLK_DIV 5
53
54
55/*
56 * Memory Settings
57 */
58#define CONFIG_MEM_SIZE 32
59#define CONFIG_MEM_ADD_WDTH 9
60
61#define CONFIG_EBIU_SDRRC_VAL 0x306
62#define CONFIG_EBIU_SDGCTL_VAL 0x91114d
63
64#define CONFIG_EBIU_AMGCTL_VAL 0xFF
65#define CONFIG_EBIU_AMBCTL0_VAL 0x7BB07BB0
66#define CONFIG_EBIU_AMBCTL1_VAL 0xFFC27BB0
67
68#define CONFIG_SYS_MONITOR_LEN (256 << 10)
69#define CONFIG_SYS_MALLOC_LEN (128 << 10)
70
71
72/*
73 * Network Settings
74 */
75#ifndef __ADSPBF534__
76#define CONFIG_BFIN_MAC
77#define CONFIG_NETCONSOLE 1
d7fdc141
MF
78#endif
79#ifdef CONFIG_BFIN_MAC
80#define CONFIG_IPADDR 192.168.0.15
81#define CONFIG_NETMASK 255.255.255.0
82#define CONFIG_GATEWAYIP 192.168.0.1
83#define CONFIG_SERVERIP 192.168.0.2
84#define CONFIG_HOSTNAME bf537-minotaur
85#endif
86
87#define CONFIG_SYS_AUTOLOAD "no"
8b3637c6 88#define CONFIG_ROOTPATH "/romfs"
8d1fea2c
MF
89/* Uncomment next line to use fixed MAC address */
90/* #define CONFIG_ETHADDR 02:80:ad:20:31:42 */
d7fdc141 91
c42f56d9 92#define CONFIG_LIB_RAND
d7fdc141
MF
93
94/*
95 * Flash Settings
96 */
97/* We don't have a parallel flash chip there */
98#define CONFIG_SYS_NO_FLASH
99
100
101/*
102 * SPI Settings
103 */
104#define CONFIG_BFIN_SPI
105#define CONFIG_ENV_SPI_MAX_HZ 30000000
afac8b07 106#define CONFIG_SF_DEFAULT_SPEED 30000000
d7fdc141
MF
107#define CONFIG_SPI_FLASH
108#define CONFIG_SPI_FLASH_STMICRO
109
110
111/*
112 * Env Storage Settings
113 */
114#define CONFIG_ENV_IS_IN_SPI_FLASH
115#define CONFIG_ENV_OFFSET 0x10000
116#define CONFIG_ENV_SIZE 0x10000
117#define CONFIG_ENV_SECT_SIZE 0x10000
76d82187 118#define CONFIG_ENV_IS_EMBEDDED_IN_LDR
d7fdc141
MF
119
120
121/*
122 * I2C settings
123 */
124#define CONFIG_BFIN_TWI_I2C 1
125#define CONFIG_HARD_I2C 1
126#define CONFIG_SYS_I2C_SPEED 50000
127#define CONFIG_SYS_I2C_SLAVE 0
128
129
130/*
131 * Misc Settings
132 */
133#define CONFIG_SYS_LONGHELP 1
134#define CONFIG_CMDLINE_EDITING 1
135#define CONFIG_ENV_OVERWRITE 1
136#define CONFIG_MISC_INIT_R
137
138#define CONFIG_BAUDRATE 57600
139#define CONFIG_UART_CONSOLE 0
7a58eb96 140#define CONFIG_BFIN_SERIAL
d7fdc141
MF
141
142#define CONFIG_PANIC_HANG 1
143#define CONFIG_RTC_BFIN 1
144#define CONFIG_BOOT_RETRY_TIME -1
145#define CONFIG_LOADS_ECHO 1
146
147#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_UART)
148# define CONFIG_BOOTDELAY -1
149#else
150# define CONFIG_BOOTDELAY 5
151#endif
152
153#include <config_cmd_default.h>
154
155#ifdef CONFIG_BFIN_MAC
156# define CONFIG_CMD_DHCP
157# define CONFIG_CMD_PING
158#else
159# undef CONFIG_CMD_NET
42246c3f 160# undef CONFIG_CMD_NFS
d7fdc141
MF
161#endif
162
163#define CONFIG_CMD_BOOTLDR
164#define CONFIG_CMD_CACHE
165#define CONFIG_CMD_DATE
166#define CONFIG_CMD_ELF
167#undef CONFIG_CMD_FLASH
168#define CONFIG_CMD_I2C
169#undef CONFIG_CMD_IMLS
170#define CONFIG_CMD_SF
171
172#define CONFIG_BOOTCOMMAND "run ramboot"
173#define CONFIG_BOOTARGS "root=/dev/mtdblock0 rw"
174#define CONFIG_SYS_PROMPT "minotaur> "
175
176#define BOOT_ENV_SETTINGS \
177 "update=tftpboot $(loadaddr) u-boot.ldr;" \
5368c55d 178 "sf probe " __stringify(BFIN_BOOT_SPI_SSEL) ";" \
d7fdc141
MF
179 "sf erase 0 0x30000;" \
180 "sf write $(loadaddr) 0 $(filesize)" \
181 "flashboot=sf read 0x1000000 0x30000 0x320000;" \
182 "bootm 0x1000000\0"
183#ifdef CONFIG_BFIN_MAC
184# define NETWORK_ENV_SETTINGS \
185 "nfsargs=setenv bootargs root=/dev/nfs rw " \
186 "nfsroot=$(serverip):$(rootpath)\0" \
187 "addip=setenv bootargs $(bootargs) " \
188 "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \
189 ":$(hostname):eth0:off\0" \
190 "ramboot=tftpboot $(loadaddr) linux;" \
191 "run ramargs;run addip;bootelf\0" \
192 "nfsboot=tftpboot $(loadaddr) linux;" \
193 "run nfsargs;run addip;bootelf\0"
194#else
195# define NETWORK_ENV_SETTINGS
196#endif
197#define CONFIG_EXTRA_ENV_SETTINGS \
198 NETWORK_ENV_SETTINGS \
199 "ramargs=setenv bootargs " CONFIG_BOOTARGS "\0" \
200 BOOT_ENV_SETTINGS
201
d7fdc141 202#endif