[people/ms/u-boot.git] / include / configs / bf548-ezkit.h

/*
 * U-boot - Configuration file for BF548 STAMP board
 */

#ifndef __CONFIG_BF548_EZKIT_H__
#define __CONFIG_BF548_EZKIT_H__

#include <asm/config-pre.h>


/*
 * Processor Settings
 */
#define CONFIG_BFIN_CPU             bf548-0.0
#define CONFIG_BFIN_BOOT_MODE       BFIN_BOOT_PARA


/*
 * Clock Settings
 *	CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
 *	SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
 */
/* CONFIG_CLKIN_HZ is any value in Hz					*/
#define CONFIG_CLKIN_HZ			25000000
/* CLKIN_HALF controls the DF bit in PLL_CTL      0 = CLKIN		*/
/*                                                1 = CLKIN / 2		*/
#define CONFIG_CLKIN_HALF		0
/* PLL_BYPASS controls the BYPASS bit in PLL_CTL  0 = do not bypass	*/
/*                                                1 = bypass PLL	*/
#define CONFIG_PLL_BYPASS		0
/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL		*/
/* Values can range from 0-63 (where 0 means 64)			*/
#define CONFIG_VCO_MULT			21
/* CCLK_DIV controls the core clock divider				*/
/* Values can be 1, 2, 4, or 8 ONLY					*/
#define CONFIG_CCLK_DIV			1
/* SCLK_DIV controls the system clock divider				*/
/* Values can range from 1-15						*/
#define CONFIG_SCLK_DIV			4


/*
 * Memory Settings
 */
#define CONFIG_MEM_ADD_WDTH	10
#define CONFIG_MEM_SIZE		64

#define CONFIG_EBIU_DDRCTL0_VAL	0x218A83FE
#define CONFIG_EBIU_DDRCTL1_VAL	0x20022222
#define CONFIG_EBIU_DDRCTL2_VAL	0x00000021

/* Default EZ-Kit bank mapping:
 *	Async Bank 0 - 32MB Burst Flash
 *	Async Bank 1 - Ethernet
 *	Async Bank 2 - Nothing
 *	Async Bank 3 - Nothing
 */
#define CONFIG_EBIU_AMGCTL_VAL	0xFF
#define CONFIG_EBIU_AMBCTL0_VAL	0x7BB07BB0
#define CONFIG_EBIU_AMBCTL1_VAL	0xFFC27BB0
#define CONFIG_EBIU_FCTL_VAL	(BCLK_4)
#define CONFIG_EBIU_MODE_VAL	(B0MODE_FLASH)

#define CONFIG_SYS_MONITOR_LEN	(1024 * 1024)
#define CONFIG_SYS_MALLOC_LEN	(768 * 1024)


/*
 * Network Settings
 */
#define ADI_CMDS_NETWORK	1
#define CONFIG_NET_MULTI
#define CONFIG_SMC911X	1
#define CONFIG_SMC911X_BASE	0x24000000
#define CONFIG_SMC911X_16_BIT
#define CONFIG_HOSTNAME		bf548-ezkit
/* Uncomment next line to use fixed MAC address */
/* #define CONFIG_ETHADDR	02:80:ad:20:31:e8 */


/*
 * Flash Settings
 */
#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_FLASH_BASE		0x20000000
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_SYS_FLASH_PROTECTION
#define CONFIG_SYS_MAX_FLASH_BANKS	1
#define CONFIG_SYS_MAX_FLASH_SECT	259


/*
 * SPI Settings
 */
#define CONFIG_BFIN_SPI
#define CONFIG_ENV_SPI_MAX_HZ	30000000
#define CONFIG_SF_DEFAULT_SPEED	30000000
#define CONFIG_SPI_FLASH
#define CONFIG_SPI_FLASH_STMICRO


/*
 * Env Storage Settings
 */
#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER)
#define CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_ENV_OFFSET	0x10000
#define CONFIG_ENV_SIZE		0x2000
#define CONFIG_ENV_SECT_SIZE	0x10000
#define CONFIG_ENV_IS_EMBEDDED_IN_LDR
#elif (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_NAND)
#define CONFIG_ENV_IS_IN_NAND
#define CONFIG_ENV_OFFSET	0x40000
#define CONFIG_ENV_SIZE		0x20000
#else
#define CONFIG_ENV_IS_IN_FLASH	1
#define CONFIG_ENV_ADDR		0x20002000
#define CONFIG_ENV_OFFSET	0x2000
#define CONFIG_ENV_SIZE		0x2000
#define CONFIG_ENV_SECT_SIZE	(128 * 1024)
#define CONFIG_ENV_IS_EMBEDDED_IN_LDR
#endif


/*
 * NAND Settings
 */
#define CONFIG_BFIN_NFC_CTL_VAL	0x0033
#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_NAND)
# define CONFIG_BFIN_NFC_BOOTROM_ECC
#endif
#define CONFIG_DRIVER_NAND_BFIN
#define CONFIG_SYS_NAND_BASE		0 /* not actually used */
#define CONFIG_SYS_MAX_NAND_DEVICE	1
#define NAND_MAX_CHIPS		1


/*
 * I2C Settings
 */
#define CONFIG_BFIN_TWI_I2C	1
#define CONFIG_HARD_I2C		1


/*
 * SATA
 */
#if !defined(__ADSPBF544__)
#define CONFIG_LIBATA
#define CONFIG_SYS_SATA_MAX_DEVICE 1
#define CONFIG_LBA48
#define CONFIG_PATA_BFIN
#define CONFIG_BFIN_ATAPI_BASE_ADDR	0xFFC03800
#define CONFIG_BFIN_ATA_MODE	XFER_PIO_4
#endif


/*
 * SDH Settings
 */
#if !defined(__ADSPBF544__)
#define CONFIG_GENERIC_MMC
#define CONFIG_MMC
#define CONFIG_BFIN_SDH
#endif


/*
 * USB Settings
 */
#if !defined(__ADSPBF544__)
#define CONFIG_USB
#define CONFIG_MUSB_HCD
#define CONFIG_USB_BLACKFIN
#define CONFIG_USB_STORAGE
#define CONFIG_MUSB_TIMEOUT 100000
#endif


/*
 * Misc Settings
 */
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_BOARD_SIZE_LIMIT $$(( 512 * 1024 ))
#define CONFIG_RTC_BFIN
#define CONFIG_UART_CONSOLE	1
#define CONFIG_BFIN_SPI_IMG_SIZE 0x50000

#ifndef __ADSPBF542__
/* Don't waste time transferring a logo over the UART */
# if (CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_UART)
#  define CONFIG_VIDEO
# endif
# define CONFIG_DEB_DMA_URGENT
#endif

/* Define if want to do post memory test */
#undef CONFIG_POST
#ifdef CONFIG_POST
#define FLASH_START_POST_BLOCK 11       /* Should > = 11 */
#define FLASH_END_POST_BLOCK   71       /* Should < = 71 */
#endif


/*
 * Pull in common ADI header for remaining command/environment setup
 */
#include <configs/bfin_adi_common.h>

#endif
Commit	Line	Data
76d21803 MF	1	/*
	2	* U-boot - Configuration file for BF548 STAMP board
	3	*/
	4
	5	#ifndef __CONFIG_BF548_EZKIT_H__
	6	#define __CONFIG_BF548_EZKIT_H__
	7
f348ab85	8	#include <asm/config-pre.h>
76d21803 MF	9
	10
	11	/*
	12	* Processor Settings
	13	*/
fbcf8e8c	14	#define CONFIG_BFIN_CPU bf548-0.0
76d21803 MF	15	#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_PARA
	16
	17
	18	/*
	19	* Clock Settings
	20	* CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
	21	* SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
	22	*/
	23	/* CONFIG_CLKIN_HZ is any value in Hz */
	24	#define CONFIG_CLKIN_HZ 25000000
	25	/* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */
	26	/* 1 = CLKIN / 2 */
	27	#define CONFIG_CLKIN_HALF 0
	28	/* PLL_BYPASS controls the BYPASS bit in PLL_CTL 0 = do not bypass */
	29	/* 1 = bypass PLL */
	30	#define CONFIG_PLL_BYPASS 0
	31	/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */
	32	/* Values can range from 0-63 (where 0 means 64) */
	33	#define CONFIG_VCO_MULT 21
	34	/* CCLK_DIV controls the core clock divider */
	35	/* Values can be 1, 2, 4, or 8 ONLY */
	36	#define CONFIG_CCLK_DIV 1
	37	/* SCLK_DIV controls the system clock divider */
	38	/* Values can range from 1-15 */
	39	#define CONFIG_SCLK_DIV 4
	40
	41
	42	/*
	43	* Memory Settings
	44	*/
	45	#define CONFIG_MEM_ADD_WDTH 10
	46	#define CONFIG_MEM_SIZE 64
	47
	48	#define CONFIG_EBIU_DDRCTL0_VAL 0x218A83FE
	49	#define CONFIG_EBIU_DDRCTL1_VAL 0x20022222
	50	#define CONFIG_EBIU_DDRCTL2_VAL 0x00000021
	51
	52	/* Default EZ-Kit bank mapping:
	53	* Async Bank 0 - 32MB Burst Flash
	54	* Async Bank 1 - Ethernet
	55	* Async Bank 2 - Nothing
	56	* Async Bank 3 - Nothing
	57	*/
	58	#define CONFIG_EBIU_AMGCTL_VAL 0xFF
	59	#define CONFIG_EBIU_AMBCTL0_VAL 0x7BB07BB0
	60	#define CONFIG_EBIU_AMBCTL1_VAL 0xFFC27BB0
	61	#define CONFIG_EBIU_FCTL_VAL (BCLK_4)
	62	#define CONFIG_EBIU_MODE_VAL (B0MODE_FLASH)
	63
fea63e2a	64	#define CONFIG_SYS_MONITOR_LEN (1024 * 1024)
76d21803 MF	65	#define CONFIG_SYS_MALLOC_LEN (768 * 1024)
	66
	67
	68	/*
	69	* Network Settings
	70	*/
	71	#define ADI_CMDS_NETWORK 1
736fead8 BW	72	#define CONFIG_NET_MULTI
	73	#define CONFIG_SMC911X 1
	74	#define CONFIG_SMC911X_BASE 0x24000000
	75	#define CONFIG_SMC911X_16_BIT
76d21803 MF	76	#define CONFIG_HOSTNAME bf548-ezkit
	77	/* Uncomment next line to use fixed MAC address */
	78	/* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */
	79
	80
	81	/*
	82	* Flash Settings
	83	*/
	84	#define CONFIG_FLASH_CFI_DRIVER
	85	#define CONFIG_SYS_FLASH_BASE 0x20000000
	86	#define CONFIG_SYS_FLASH_CFI
	87	#define CONFIG_SYS_FLASH_PROTECTION
	88	#define CONFIG_SYS_MAX_FLASH_BANKS 1
	89	#define CONFIG_SYS_MAX_FLASH_SECT 259
	90
	91
	92	/*
	93	* SPI Settings
	94	*/
	95	#define CONFIG_BFIN_SPI
	96	#define CONFIG_ENV_SPI_MAX_HZ 30000000
afac8b07	97	#define CONFIG_SF_DEFAULT_SPEED 30000000
76d21803 MF	98	#define CONFIG_SPI_FLASH
	99	#define CONFIG_SPI_FLASH_STMICRO
	100
	101
	102	/*
	103	* Env Storage Settings
	104	*/
	105	#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER)
	106	#define CONFIG_ENV_IS_IN_SPI_FLASH
	107	#define CONFIG_ENV_OFFSET 0x10000
	108	#define CONFIG_ENV_SIZE 0x2000
	109	#define CONFIG_ENV_SECT_SIZE 0x10000
76d82187	110	#define CONFIG_ENV_IS_EMBEDDED_IN_LDR
76d21803 MF	111	#elif (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_NAND)
	112	#define CONFIG_ENV_IS_IN_NAND
	113	#define CONFIG_ENV_OFFSET 0x40000
	114	#define CONFIG_ENV_SIZE 0x20000
	115	#else
	116	#define CONFIG_ENV_IS_IN_FLASH 1
	117	#define CONFIG_ENV_ADDR 0x20002000
	118	#define CONFIG_ENV_OFFSET 0x2000
	119	#define CONFIG_ENV_SIZE 0x2000
	120	#define CONFIG_ENV_SECT_SIZE (128 * 1024)
76d82187	121	#define CONFIG_ENV_IS_EMBEDDED_IN_LDR
76d21803 MF	122	#endif
	123
	124
	125	/*
	126	* NAND Settings
	127	*/
	128	#define CONFIG_BFIN_NFC_CTL_VAL 0x0033
	129	#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_NAND)
	130	# define CONFIG_BFIN_NFC_BOOTROM_ECC
	131	#endif
	132	#define CONFIG_DRIVER_NAND_BFIN
	133	#define CONFIG_SYS_NAND_BASE 0 /* not actually used */
	134	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	135	#define NAND_MAX_CHIPS 1
76d21803 MF	136
	137
	138	/*
	139	* I2C Settings
	140	*/
	141	#define CONFIG_BFIN_TWI_I2C 1
	142	#define CONFIG_HARD_I2C 1
76d21803 MF	143
	144
	145	/*
	146	* SATA
	147	*/
	148	#if !defined(__ADSPBF544__)
	149	#define CONFIG_LIBATA
	150	#define CONFIG_SYS_SATA_MAX_DEVICE 1
	151	#define CONFIG_LBA48
	152	#define CONFIG_PATA_BFIN
	153	#define CONFIG_BFIN_ATAPI_BASE_ADDR 0xFFC03800
	154	#define CONFIG_BFIN_ATA_MODE XFER_PIO_4
	155	#endif
	156
	157
	158	/*
	159	* SDH Settings
	160	*/
	161	#if !defined(__ADSPBF544__)
e54c8209	162	#define CONFIG_GENERIC_MMC
76d21803 MF	163	#define CONFIG_MMC
	164	#define CONFIG_BFIN_SDH
	165	#endif
	166
	167
	168	/*
	169	* USB Settings
	170	*/
	171	#if !defined(__ADSPBF544__)
	172	#define CONFIG_USB
	173	#define CONFIG_MUSB_HCD
	174	#define CONFIG_USB_BLACKFIN
	175	#define CONFIG_USB_STORAGE
	176	#define CONFIG_MUSB_TIMEOUT 100000
	177	#endif
	178
	179
	180	/*
	181	* Misc Settings
	182	*/
	183	#define CONFIG_BOARD_EARLY_INIT_F
58d7570c	184	#define CONFIG_BOARD_SIZE_LIMIT $$(( 512 * 1024 ))
76d21803 MF	185	#define CONFIG_RTC_BFIN
76d21803 MF	186	#define CONFIG_UART_CONSOLE 1
abaa5ba4	187	#define CONFIG_BFIN_SPI_IMG_SIZE 0x50000
76d21803 MF	188
	189	#ifndef __ADSPBF542__
	190	/* Don't waste time transferring a logo over the UART */
	191	# if (CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_UART)
	192	# define CONFIG_VIDEO
	193	# endif
	194	# define CONFIG_DEB_DMA_URGENT
	195	#endif
	196
	197	/* Define if want to do post memory test */
	198	#undef CONFIG_POST
	199	#ifdef CONFIG_POST
	200	#define FLASH_START_POST_BLOCK 11 /* Should > = 11 */
	201	#define FLASH_END_POST_BLOCK 71 /* Should < = 71 */
	202	#endif
	203
	204
	205	/*
	206	* Pull in common ADI header for remaining command/environment setup
	207	*/
	208	#include <configs/bfin_adi_common.h>
	209
76d21803	210	#endif