[people/ms/u-boot.git] / include / configs / bf561-acvilon.h

/*
 * U-Boot - Configuration file for BF561 Acvilon System On Module
 * For more information please go to http://www.niistt.ru/
 */

#ifndef __CONFIG_BF561_ACVILON_H__
#define __CONFIG_BF561_ACVILON_H__

#include <asm/config-pre.h>

/*
 * Processor Settings
 */
#define CONFIG_BFIN_CPU             bf561-0.5
#define CONFIG_BFIN_BOOT_MODE       BFIN_BOOT_BYPASS

/*
 * Clock Settings
 *	CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
 *	SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
 */
/* CONFIG_CLKIN_HZ is any value in Hz					*/
#define CONFIG_CLKIN_HZ				12000000
/* CLKIN_HALF controls the DF bit in PLL_CTL      0 = CLKIN		*/
/*                                                1 = CLKIN / 2		*/
#define CONFIG_CLKIN_HALF			0
/* PLL_BYPASS controls the BYPASS bit in PLL_CTL  0 = do not bypass	*/
/*                                                1 = bypass PLL	*/
#define CONFIG_PLL_BYPASS			0
/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL		*/
/* Values can range from 0-63 (where 0 means 64)			*/
#define CONFIG_VCO_MULT				50
/* CCLK_DIV controls the core clock divider				*/
/* Values can be 1, 2, 4, or 8 ONLY					*/
#define CONFIG_CCLK_DIV				1
/* SCLK_DIV controls the system clock divider				*/
/* Values can range from 1-15						*/
#define CONFIG_SCLK_DIV				5

/*
 * Memory Settings
 */
#define CONFIG_MEM_ADD_WDTH			10
#define CONFIG_MEM_SIZE				128

#define CONFIG_EBIU_SDRRC_VAL		0x300
#define CONFIG_EBIU_SDGCTL_VAL		0x00B11189

#define CONFIG_EBIU_AMGCTL_VAL		0x4e
#define CONFIG_EBIU_AMBCTL0_VAL		0xffc2ffc2
#define CONFIG_EBIU_AMBCTL1_VAL		0x99b35554

#define CONFIG_SYS_MONITOR_LEN		(384 * 1024)
#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)

/*
 * RTC Settings
 */
#define CONFIG_RTC_DS1337
#define CONFIG_SYS_I2C_RTC_ADDR 0x68

/* I2C SYSMON (LM75, AD7414 is almost compatible)                       */
#define CONFIG_DTT_LM75         1               /* ON Semi's LM75       */
#define CONFIG_DTT_SENSORS      {0}             /* Sensor addresses     */
#define CONFIG_SYS_I2C_DTT_ADDR 0x49
/*#define CONFIG_SYS_DTT_MAX_TEMP 70
#define CONFIG_SYS_DTT_LOW_TEMP -30
#define CONFIG_SYS_DTT_HYSTERESIS       3*/

/*
 * Network Settings
 */
#define ADI_CMDS_NETWORK			1
#define CONFIG_CMD_DATE
#define CONFIG_CMD_DTT

#if defined(CONFIG_CMD_NET)

#define CONFIG_SMC911X				1
#define CONFIG_SMC911X_32_BIT
/* #define CONFIG_SMC911X_16_BIT */
#define CONFIG_SMC911X_BASE			0x28000000

#endif /* (CONFIG_CMD_NET) */

#define CONFIG_HOSTNAME		bf561-acvilon

/*
 * I2C Settings
 */
#define CONFIG_HARD_I2C
/* Use 300kHz speed by default */
#define CONFIG_SYS_I2C_SPEED			0x00
#define CONFIG_PCA9564_I2C
#define CONFIG_PCA9564_BASE			0x2c000000

/*
 * SPI Settings
 */
#define CONFIG_BFIN_SPI
#define CONFIG_ENV_SPI_MAX_HZ		10000000
#define CONFIG_SF_DEFAULT_SPEED		10000000

/*
 * Env Storage Settings
 */
#define CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_ENV_SECT_SIZE		(1056 * 8)
#define CONFIG_ENV_OFFSET			((16 + 256) * 1056)
#define CONFIG_ENV_SIZE				(8 * 1056)

/*
 * NAND Settings
 * We're using NAND_PLAT driver to make things simplier
 */
#define CONFIG_NAND_PLAT
#define CONFIG_CMD_NAND
#define CONFIG_SYS_NAND_BASE		0x24000000
#define CONFIG_SYS_MAX_NAND_DEVICE	1

#define BFIN_NAND_CLE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 2))
#define BFIN_NAND_ALE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 3))
#define BFIN_NAND_WRITE(addr, cmd) \
	do { \
		bfin_write8(addr, cmd); \
		SSYNC(); \
	} while (0)

#define NAND_PLAT_WRITE_CMD(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_CLE(chip), cmd)
#define NAND_PLAT_WRITE_ADR(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_ALE(chip), cmd)
#define NAND_PLAT_GPIO_DEV_READY       GPIO_PF10

/*
 * Misc Settings
 */
#define CONFIG_UART_CONSOLE			0
#define CONFIG_BAUDRATE				57600

/*
 * Pull in common ADI header for remaining command/environment setup
 */
#include <configs/bfin_adi_common.h>

#endif				/* __CONFIG_BF561_ACVILON_H__ */
Commit	Line	Data
446707c9	1	/*
a187559e	2	* U-Boot - Configuration file for BF561 Acvilon System On Module
446707c9 VY	3	* For more information please go to http://www.niistt.ru/
	4	*/
	5
	6	#ifndef __CONFIG_BF561_ACVILON_H__
	7	#define __CONFIG_BF561_ACVILON_H__
	8
	9	#include <asm/config-pre.h>
	10
446707c9 VY	11	/*
	12	* Processor Settings
	13	*/
fbcf8e8c MF	14	#define CONFIG_BFIN_CPU bf561-0.5
fbcf8e8c MF	15	#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS
446707c9	16
446707c9 VY	17	/*
	18	* Clock Settings
	19	* CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
	20	* SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
	21	*/
	22	/* CONFIG_CLKIN_HZ is any value in Hz */
	23	#define CONFIG_CLKIN_HZ 12000000
	24	/* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */
	25	/* 1 = CLKIN / 2 */
	26	#define CONFIG_CLKIN_HALF 0
	27	/* PLL_BYPASS controls the BYPASS bit in PLL_CTL 0 = do not bypass */
	28	/* 1 = bypass PLL */
	29	#define CONFIG_PLL_BYPASS 0
	30	/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */
	31	/* Values can range from 0-63 (where 0 means 64) */
	32	#define CONFIG_VCO_MULT 50
	33	/* CCLK_DIV controls the core clock divider */
	34	/* Values can be 1, 2, 4, or 8 ONLY */
	35	#define CONFIG_CCLK_DIV 1
	36	/* SCLK_DIV controls the system clock divider */
	37	/* Values can range from 1-15 */
	38	#define CONFIG_SCLK_DIV 5
	39
446707c9 VY	40	/*
	41	* Memory Settings
	42	*/
	43	#define CONFIG_MEM_ADD_WDTH 10
	44	#define CONFIG_MEM_SIZE 128
	45
	46	#define CONFIG_EBIU_SDRRC_VAL 0x300
	47	#define CONFIG_EBIU_SDGCTL_VAL 0x00B11189
	48
	49	#define CONFIG_EBIU_AMGCTL_VAL 0x4e
	50	#define CONFIG_EBIU_AMBCTL0_VAL 0xffc2ffc2
	51	#define CONFIG_EBIU_AMBCTL1_VAL 0x99b35554
	52
6e6b221c	53	#define CONFIG_SYS_MONITOR_LEN (384 * 1024)
446707c9 VY	54	#define CONFIG_SYS_MALLOC_LEN (128 * 1024)
446707c9 VY	55
446707c9 VY	56	/*
	57	* RTC Settings
	58	*/
	59	#define CONFIG_RTC_DS1337
	60	#define CONFIG_SYS_I2C_RTC_ADDR 0x68
	61
	62	/* I2C SYSMON (LM75, AD7414 is almost compatible) */
	63	#define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */
	64	#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */
	65	#define CONFIG_SYS_I2C_DTT_ADDR 0x49
	66	/*#define CONFIG_SYS_DTT_MAX_TEMP 70
	67	#define CONFIG_SYS_DTT_LOW_TEMP -30
	68	#define CONFIG_SYS_DTT_HYSTERESIS 3*/
	69
446707c9 VY	70	/*
	71	* Network Settings
	72	*/
	73	#define ADI_CMDS_NETWORK 1
446707c9 VY	74	#define CONFIG_CMD_DATE
	75	#define CONFIG_CMD_DTT
	76
	77	#if defined(CONFIG_CMD_NET)
	78
	79	#define CONFIG_SMC911X 1
	80	#define CONFIG_SMC911X_32_BIT
	81	/* #define CONFIG_SMC911X_16_BIT */
	82	#define CONFIG_SMC911X_BASE 0x28000000
	83
	84	#endif /* (CONFIG_CMD_NET) */
	85
	86	#define CONFIG_HOSTNAME bf561-acvilon
	87
446707c9 VY	88	/*
	89	* I2C Settings
	90	*/
	91	#define CONFIG_HARD_I2C
	92	/* Use 300kHz speed by default */
	93	#define CONFIG_SYS_I2C_SPEED 0x00
	94	#define CONFIG_PCA9564_I2C
	95	#define CONFIG_PCA9564_BASE 0x2c000000
	96
446707c9 VY	97	/*
	98	* SPI Settings
	99	*/
	100	#define CONFIG_BFIN_SPI
	101	#define CONFIG_ENV_SPI_MAX_HZ 10000000
	102	#define CONFIG_SF_DEFAULT_SPEED 10000000
446707c9	103
446707c9 VY	104	/*
	105	* Env Storage Settings
	106	*/
	107	#define CONFIG_ENV_IS_IN_SPI_FLASH
446707c9 VY	108	#define CONFIG_ENV_SECT_SIZE (1056 * 8)
	109	#define CONFIG_ENV_OFFSET ((16 + 256) * 1056)
	110	#define CONFIG_ENV_SIZE (8 * 1056)
446707c9	111
446707c9 VY	112	/*
	113	* NAND Settings
	114	* We're using NAND_PLAT driver to make things simplier
	115	*/
	116	#define CONFIG_NAND_PLAT
	117	#define CONFIG_CMD_NAND
	118	#define CONFIG_SYS_NAND_BASE 0x24000000
	119	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	120
	121	#define BFIN_NAND_CLE(chip) ((unsigned long)(chip)->IO_ADDR_W \| (1 << 2))
	122	#define BFIN_NAND_ALE(chip) ((unsigned long)(chip)->IO_ADDR_W \| (1 << 3))
446707c9 VY	123	#define BFIN_NAND_WRITE(addr, cmd) \
	124	do { \
	125	bfin_write8(addr, cmd); \
	126	SSYNC(); \
	127	} while (0)
	128
	129	#define NAND_PLAT_WRITE_CMD(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_CLE(chip), cmd)
	130	#define NAND_PLAT_WRITE_ADR(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_ALE(chip), cmd)
67ceefa7	131	#define NAND_PLAT_GPIO_DEV_READY GPIO_PF10
446707c9	132
446707c9 VY	133	/*
	134	* Misc Settings
	135	*/
	136	#define CONFIG_UART_CONSOLE 0
	137	#define CONFIG_BAUDRATE 57600
446707c9 VY	138
	139	/*
	140	* Pull in common ADI header for remaining command/environment setup
	141	*/
	142	#include <configs/bfin_adi_common.h>
	143
	144	#endif /* __CONFIG_BF561_ACVILON_H__ */