[people/ms/u-boot.git] / include / configs / bf561-acvilon.h

/*
 * U-boot - Configuration file for BF561 Acvilon System On Module
 * For more information please go to http://www.niistt.ru/
 */

#ifndef __CONFIG_BF561_ACVILON_H__
#define __CONFIG_BF561_ACVILON_H__

#include <asm/config-pre.h>


/*
 * Processor Settings
 */
#define CONFIG_BFIN_CPU             bf561-0.5
#define CONFIG_BFIN_BOOT_MODE       BFIN_BOOT_BYPASS


/*
 * Clock Settings
 *	CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
 *	SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
 */
/* CONFIG_CLKIN_HZ is any value in Hz					*/
#define CONFIG_CLKIN_HZ				12000000
/* CLKIN_HALF controls the DF bit in PLL_CTL      0 = CLKIN		*/
/*                                                1 = CLKIN / 2		*/
#define CONFIG_CLKIN_HALF			0
/* PLL_BYPASS controls the BYPASS bit in PLL_CTL  0 = do not bypass	*/
/*                                                1 = bypass PLL	*/
#define CONFIG_PLL_BYPASS			0
/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL		*/
/* Values can range from 0-63 (where 0 means 64)			*/
#define CONFIG_VCO_MULT				50
/* CCLK_DIV controls the core clock divider				*/
/* Values can be 1, 2, 4, or 8 ONLY					*/
#define CONFIG_CCLK_DIV				1
/* SCLK_DIV controls the system clock divider				*/
/* Values can range from 1-15						*/
#define CONFIG_SCLK_DIV				5


/*
 * Memory Settings
 */
#define CONFIG_MEM_ADD_WDTH			10
#define CONFIG_MEM_SIZE				128

#define CONFIG_EBIU_SDRRC_VAL		0x300
#define CONFIG_EBIU_SDGCTL_VAL		0x00B11189

#define CONFIG_EBIU_AMGCTL_VAL		0x4e
#define CONFIG_EBIU_AMBCTL0_VAL		0xffc2ffc2
#define CONFIG_EBIU_AMBCTL1_VAL		0x99b35554

#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)
#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)


/*
 * RTC Settings
 */
#define CONFIG_RTC_DS1337
#define CONFIG_SYS_I2C_RTC_ADDR 0x68

/* I2C SYSMON (LM75, AD7414 is almost compatible)                       */
#define CONFIG_DTT_LM75         1               /* ON Semi's LM75       */
#define CONFIG_DTT_SENSORS      {0}             /* Sensor addresses     */
#define CONFIG_SYS_I2C_DTT_ADDR 0x49
/*#define CONFIG_SYS_DTT_MAX_TEMP 70
#define CONFIG_SYS_DTT_LOW_TEMP -30
#define CONFIG_SYS_DTT_HYSTERESIS       3*/


/*
 * Network Settings
 */
#define ADI_CMDS_NETWORK			1
#define CONFIG_NET_MULTI
#define CONFIG_CMD_NET
#define CONFIG_CMD_MII
#define CONFIG_CMD_DATE
#define CONFIG_CMD_DTT

#if defined(CONFIG_CMD_NET)

#define CONFIG_SMC911X				1
#define CONFIG_SMC911X_32_BIT
/* #define CONFIG_SMC911X_16_BIT */
#define CONFIG_SMC911X_BASE			0x28000000

#endif /* (CONFIG_CMD_NET) */

#define CONFIG_HOSTNAME		bf561-acvilon

/* Uncomment next line to use fixed MAC address */
/* #define CONFIG_ETHADDR				02:80:ad:20:31:e8 */


/*
 * Flash Settings
 */
#define CONFIG_SYS_NO_FLASH


/*
 * I2C Settings
 */
#define CONFIG_HARD_I2C
/* Use 300kHz speed by default */
#define CONFIG_SYS_I2C_SPEED			0x00
#define CONFIG_PCA9564_I2C
#define CONFIG_PCA9564_BASE			0x2c000000


/*
 * SPI Settings
 */
#define CONFIG_BFIN_SPI
#define CONFIG_ENV_SPI_MAX_HZ		10000000
#define CONFIG_SF_DEFAULT_SPEED		10000000
#define CONFIG_SPI_FLASH
#define CONFIG_SPI_FLASH_ATMEL


/*
 * Env Storage Settings
 */
#define CONFIG_ENV_IS_IN_SPI_FLASH
/* #define CONFIG_CMD_SAVEENV */
#define CONFIG_ENV_SECT_SIZE		(1056 * 8)
#define CONFIG_ENV_OFFSET			((16 + 256) * 1056)
#define CONFIG_ENV_SIZE				(8 * 1056)


/*
 * NAND Settings
 * We're using NAND_PLAT driver to make things simplier
 */
#define CONFIG_NAND_PLAT
#define CONFIG_CMD_NAND
#define CONFIG_SYS_NAND_BASE		0x24000000
#define CONFIG_SYS_MAX_NAND_DEVICE	1

#define BFIN_NAND_CLE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 2))
#define BFIN_NAND_ALE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 3))
#define BFIN_NAND_WRITE(addr, cmd) \
	do { \
		bfin_write8(addr, cmd); \
		SSYNC(); \
	} while (0)

#define NAND_PLAT_WRITE_CMD(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_CLE(chip), cmd)
#define NAND_PLAT_WRITE_ADR(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_ALE(chip), cmd)
#define NAND_PLAT_GPIO_DEV_READY       GPIO_PF10


/*
 * Misc Settings
 */
#define CONFIG_UART_CONSOLE			0
#define CONFIG_BAUDRATE				57600
#define CONFIG_SYS_PROMPT "Acvilon> "


/*
 * Pull in common ADI header for remaining command/environment setup
 */
#include <configs/bfin_adi_common.h>

#endif				/* __CONFIG_BF561_ACVILON_H__ */
Commit	Line	Data
446707c9 VY	1	/*
	2	* U-boot - Configuration file for BF561 Acvilon System On Module
	3	* For more information please go to http://www.niistt.ru/
	4	*/
	5
	6	#ifndef __CONFIG_BF561_ACVILON_H__
	7	#define __CONFIG_BF561_ACVILON_H__
	8
	9	#include <asm/config-pre.h>
	10
	11
	12	/*
	13	* Processor Settings
	14	*/
fbcf8e8c MF	15	#define CONFIG_BFIN_CPU bf561-0.5
fbcf8e8c MF	16	#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS
446707c9 VY	17
	18
	19	/*
	20	* Clock Settings
	21	* CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
	22	* SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
	23	*/
	24	/* CONFIG_CLKIN_HZ is any value in Hz */
	25	#define CONFIG_CLKIN_HZ 12000000
	26	/* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */
	27	/* 1 = CLKIN / 2 */
	28	#define CONFIG_CLKIN_HALF 0
	29	/* PLL_BYPASS controls the BYPASS bit in PLL_CTL 0 = do not bypass */
	30	/* 1 = bypass PLL */
	31	#define CONFIG_PLL_BYPASS 0
	32	/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */
	33	/* Values can range from 0-63 (where 0 means 64) */
	34	#define CONFIG_VCO_MULT 50
	35	/* CCLK_DIV controls the core clock divider */
	36	/* Values can be 1, 2, 4, or 8 ONLY */
	37	#define CONFIG_CCLK_DIV 1
	38	/* SCLK_DIV controls the system clock divider */
	39	/* Values can range from 1-15 */
	40	#define CONFIG_SCLK_DIV 5
	41
	42
	43	/*
	44	* Memory Settings
	45	*/
	46	#define CONFIG_MEM_ADD_WDTH 10
	47	#define CONFIG_MEM_SIZE 128
	48
	49	#define CONFIG_EBIU_SDRRC_VAL 0x300
	50	#define CONFIG_EBIU_SDGCTL_VAL 0x00B11189
	51
	52	#define CONFIG_EBIU_AMGCTL_VAL 0x4e
	53	#define CONFIG_EBIU_AMBCTL0_VAL 0xffc2ffc2
	54	#define CONFIG_EBIU_AMBCTL1_VAL 0x99b35554
	55
	56	#define CONFIG_SYS_MONITOR_LEN (256 * 1024)
	57	#define CONFIG_SYS_MALLOC_LEN (128 * 1024)
	58
	59
	60	/*
	61	* RTC Settings
	62	*/
	63	#define CONFIG_RTC_DS1337
	64	#define CONFIG_SYS_I2C_RTC_ADDR 0x68
	65
	66	/* I2C SYSMON (LM75, AD7414 is almost compatible) */
	67	#define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */
	68	#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */
	69	#define CONFIG_SYS_I2C_DTT_ADDR 0x49
	70	/*#define CONFIG_SYS_DTT_MAX_TEMP 70
	71	#define CONFIG_SYS_DTT_LOW_TEMP -30
	72	#define CONFIG_SYS_DTT_HYSTERESIS 3*/
	73
	74
	75	/*
	76	* Network Settings
	77	*/
	78	#define ADI_CMDS_NETWORK 1
	79	#define CONFIG_NET_MULTI
	80	#define CONFIG_CMD_NET
81	#define CONFIG_CMD_MII
82	#define CONFIG_CMD_DATE
83	#define CONFIG_CMD_DTT
84
85	#if defined(CONFIG_CMD_NET)
86
87	#define CONFIG_SMC911X 1
88	#define CONFIG_SMC911X_32_BIT
89	/* #define CONFIG_SMC911X_16_BIT */
90	#define CONFIG_SMC911X_BASE 0x28000000
91
92	#endif /* (CONFIG_CMD_NET) */
93
94	#define CONFIG_HOSTNAME bf561-acvilon
95
96	/* Uncomment next line to use fixed MAC address */
97	/* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */
98
99
100	/*
101	* Flash Settings
102	*/
103	#define CONFIG_SYS_NO_FLASH
104
105
106	/*
107	* I2C Settings
108	*/
109	#define CONFIG_HARD_I2C
110	/* Use 300kHz speed by default */
111	#define CONFIG_SYS_I2C_SPEED 0x00
112	#define CONFIG_PCA9564_I2C
113	#define CONFIG_PCA9564_BASE 0x2c000000
114
115
116	/*
117	* SPI Settings
118	*/
119	#define CONFIG_BFIN_SPI
120	#define CONFIG_ENV_SPI_MAX_HZ 10000000
121	#define CONFIG_SF_DEFAULT_SPEED 10000000
122	#define CONFIG_SPI_FLASH
123	#define CONFIG_SPI_FLASH_ATMEL
124
125
126	/*
127	* Env Storage Settings
128	*/
129	#define CONFIG_ENV_IS_IN_SPI_FLASH
130	/* #define CONFIG_CMD_SAVEENV */
131	#define CONFIG_ENV_SECT_SIZE (1056 * 8)
132	#define CONFIG_ENV_OFFSET ((16 + 256) * 1056)
133	#define CONFIG_ENV_SIZE (8 * 1056)
446707c9 VY	134
	135
	136	/*
	137	* NAND Settings
	138	* We're using NAND_PLAT driver to make things simplier
	139	*/
	140	#define CONFIG_NAND_PLAT
	141	#define CONFIG_CMD_NAND
	142	#define CONFIG_SYS_NAND_BASE 0x24000000
	143	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	144
	145	#define BFIN_NAND_CLE(chip) ((unsigned long)(chip)->IO_ADDR_W \| (1 << 2))
	146	#define BFIN_NAND_ALE(chip) ((unsigned long)(chip)->IO_ADDR_W \| (1 << 3))
446707c9 VY	147	#define BFIN_NAND_WRITE(addr, cmd) \
	148	do { \
	149	bfin_write8(addr, cmd); \
	150	SSYNC(); \
	151	} while (0)
	152
	153	#define NAND_PLAT_WRITE_CMD(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_CLE(chip), cmd)
	154	#define NAND_PLAT_WRITE_ADR(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_ALE(chip), cmd)
67ceefa7	155	#define NAND_PLAT_GPIO_DEV_READY GPIO_PF10
446707c9 VY	156
	157
	158	/*
	159	* Misc Settings
	160	*/
	161	#define CONFIG_UART_CONSOLE 0
	162	#define CONFIG_BAUDRATE 57600
	163	#define CONFIG_SYS_PROMPT "Acvilon> "
	164
	165
	166	/*
	167	* Pull in common ADI header for remaining command/environment setup
	168	*/
	169	#include <configs/bfin_adi_common.h>
	170
	171	#endif /* __CONFIG_BF561_ACVILON_H__ */