[people/ms/u-boot.git] / include / configs / cgtqmx6eval.h

/*
 *
 * Congatec Conga-QEVAl board configuration file.
 *
 * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
 * Based on Freescale i.MX6Q Sabre Lite board configuration file.
 * Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com>
 * Leo Sartre, <lsartre@adeneo-embedded.com>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_CGTQMX6EVAL_H
#define __CONFIG_CGTQMX6EVAL_H

#include "mx6_common.h"

#define CONFIG_MACH_TYPE	4122

#ifdef CONFIG_SPL
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SPL_SPI_SUPPORT
#define CONFIG_SPL_SPI_FLASH_SUPPORT
#define CONFIG_SYS_SPI_U_BOOT_OFFS	(64 * 1024)
#define CONFIG_SPL_SPI_LOAD
#include "imx6_spl.h"
#endif

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(10 * 1024 * 1024)

#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_BOARD_LATE_INIT
#define CONFIG_MISC_INIT_R

#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE	       UART2_BASE

/* MMC Configs */
#define CONFIG_SYS_FSL_ESDHC_ADDR      0

/* SPI NOR */
#define CONFIG_CMD_SF
#define CONFIG_SPI_FLASH
#define CONFIG_SPI_FLASH_STMICRO
#define CONFIG_SPI_FLASH_SST
#define CONFIG_MXC_SPI
#define CONFIG_SF_DEFAULT_BUS		0
#define CONFIG_SF_DEFAULT_SPEED		20000000
#define CONFIG_SF_DEFAULT_MODE		(SPI_MODE_0)

/* Miscellaneous commands */
#define CONFIG_CMD_BMODE

/* Thermal support */
#define CONFIG_IMX_THERMAL

/* I2C Configs */
#define CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
#define CONFIG_SYS_I2C_SPEED		  100000

/* PMIC */
#define CONFIG_POWER
#define CONFIG_POWER_I2C
#define CONFIG_POWER_PFUZE100
#define CONFIG_POWER_PFUZE100_I2C_ADDR	0x08

/* USB Configs */
#define CONFIG_CMD_USB
#define CONFIG_CMD_FAT
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_MX6
#define CONFIG_USB_STORAGE
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
#define CONFIG_USB_HOST_ETHER
#define CONFIG_USB_ETHER_ASIX
#define CONFIG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS	0
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 /* Enabled USB controller number */
#define CONFIG_USB_KEYBOARD
#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP

#define CONFIG_USBD_HS

#define CONFIG_CMD_USB_MASS_STORAGE
#define CONFIG_USB_FUNCTION_MASS_STORAGE
#define CONFIG_USB_GADGET_DOWNLOAD

#define CONFIG_G_DNL_VENDOR_NUM		0x0525
#define CONFIG_G_DNL_PRODUCT_NUM	0xa4a5
#define CONFIG_G_DNL_MANUFACTURER	"Congatec"

/* USB Device Firmware Update support */
#define CONFIG_CMD_DFU
#define CONFIG_USB_FUNCTION_DFU
#define CONFIG_DFU_MMC
#define CONFIG_DFU_SF

#define CONFIG_USB_FUNCTION_FASTBOOT
#define CONFIG_CMD_FASTBOOT
#define CONFIG_ANDROID_BOOT_IMAGE
#define CONFIG_FASTBOOT_BUF_ADDR   CONFIG_SYS_LOAD_ADDR
#define CONFIG_FASTBOOT_BUF_SIZE   0x07000000

/* Framebuffer */
#define CONFIG_VIDEO
#define CONFIG_VIDEO_IPUV3
#define CONFIG_CFB_CONSOLE
#define CONFIG_VGA_AS_SINGLE_DEVICE
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_SPLASH_SCREEN
#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_BMP_LOGO
#ifdef CONFIG_MX6DL
#define CONFIG_IPUV3_CLK 198000000
#else
#define CONFIG_IPUV3_CLK 264000000
#endif
#define CONFIG_IMX_HDMI

/* SATA */
#define CONFIG_CMD_SATA
#define CONFIG_DWC_AHSATA
#define CONFIG_SYS_SATA_MAX_DEVICE	1
#define CONFIG_DWC_AHSATA_PORT_ID	0
#define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_ARB_BASE_ADDR
#define CONFIG_LBA48
#define CONFIG_LIBATA

/* Ethernet */
#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_MII
#define CONFIG_FEC_MXC
#define CONFIG_MII
#define IMX_FEC_BASE			ENET_BASE_ADDR
#define CONFIG_FEC_XCV_TYPE		RGMII
#define CONFIG_ETHPRIME			"FEC"
#define CONFIG_FEC_MXC_PHYADDR		6
#define CONFIG_PHYLIB
#define CONFIG_PHY_ATHEROS

/* Command definition */

#define CONFIG_MXC_UART_BASE	UART2_BASE
#define CONFIG_CONSOLE_DEV	"ttymxc1"
#define CONFIG_MMCROOT		"/dev/mmcblk0p2"
#define CONFIG_SYS_MMC_ENV_DEV		0

#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
#define CONFIG_EXTRA_ENV_SETTINGS \
	"script=boot.scr\0" \
	"image=zImage\0" \
	"fdtfile=undefined\0" \
	"fdt_addr_r=0x18000000\0" \
	"boot_fdt=try\0" \
	"ip_dyn=yes\0" \
	"console=" CONFIG_CONSOLE_DEV "\0" \
	"dfuspi=dfu 0 sf 0:0:10000000:0\0" \
	"dfu_alt_info_spl=spl raw 0x400\0" \
	"dfu_alt_info_img=u-boot raw 0x10000\0" \
	"dfu_alt_info=spl raw 0x400\0" \
	"bootm_size=0x10000000\0" \
	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
	"mmcpart=1\0" \
	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
	"update_sd_firmware=" \
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"if mmc dev ${mmcdev}; then "	\
			"if ${get_cmd} ${update_sd_firmware_filename}; then " \
				"setexpr fw_sz ${filesize} / 0x200; " \
				"setexpr fw_sz ${fw_sz} + 1; "	\
				"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
			"fi; "	\
		"fi\0" \
	"mmcargs=setenv bootargs console=${console},${baudrate} " \
		"root=${mmcroot}\0" \
	"loadbootscript=" \
		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	"bootscript=echo Running bootscript from mmc ...; " \
		"source\0" \
	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} ${fdtfile}\0" \
	"mmcboot=echo Booting from mmc ...; " \
		"run mmcargs; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if run loadfdt; then " \
				"bootz ${loadaddr} - ${fdt_addr_r}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootz; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootz; " \
		"fi;\0" \
	"findfdt="\
		"if test $board_rev = MX6Q ; then " \
			"setenv fdtfile imx6q-qmx6.dtb; fi; " \
		"if test $board_rev = MX6DL ; then " \
			"setenv fdtfile imx6dl-qmx6.dtb; fi; " \
		"if test $fdtfile = undefined; then " \
			"echo WARNING: Could not determine dtb to use; fi; \0" \
	"netargs=setenv bootargs console=${console},${baudrate} " \
		"root=/dev/nfs " \
		"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
	"netboot=echo Booting from net ...; " \
		"run netargs; " \
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"${get_cmd} ${image}; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if ${get_cmd} ${fdt_addr_r} ${fdtfile}; then " \
				"bootz ${loadaddr} - ${fdt_addr_r}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootz; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootz; " \
		"fi;\0" \
	"spilock=sf probe && sf protect lock 0x3f0000 0x10000;"\

#define CONFIG_BOOTCOMMAND \
	"run spilock;"	    \
	"run findfdt; "	\
	"mmc dev ${mmcdev};" \
	"if mmc rescan; then " \
		"if run loadbootscript; then " \
		"run bootscript; " \
		"else " \
			"if run loadimage; then " \
				"run mmcboot; " \
			"else run netboot; " \
			"fi; " \
		"fi; " \
	"else run netboot; fi"

#define CONFIG_SYS_MEMTEST_START       0x10000000
#define CONFIG_SYS_MEMTEST_END	       0x10010000
#define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000

/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS	       1
#define PHYS_SDRAM		       MMDC0_ARB_BASE_ADDR
#define PHYS_SDRAM_SIZE			       (1u * 1024 * 1024 * 1024)

#define CONFIG_SYS_SDRAM_BASE	       PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/* Environment organization */
#if defined (CONFIG_ENV_IS_IN_MMC)
#define CONFIG_ENV_OFFSET		(6 * 64 * 1024)
#define CONFIG_SYS_MMC_ENV_DEV		0
#endif

#define CONFIG_ENV_SIZE			(8 * 1024)

#define CONFIG_ENV_IS_IN_SPI_FLASH
#if defined(CONFIG_ENV_IS_IN_SPI_FLASH)
#define CONFIG_ENV_OFFSET		(768 * 1024)
#define CONFIG_ENV_SECT_SIZE		(64 * 1024)
#define CONFIG_ENV_SPI_BUS		CONFIG_SF_DEFAULT_BUS
#define CONFIG_ENV_SPI_CS		CONFIG_SF_DEFAULT_CS
#define CONFIG_ENV_SPI_MODE		CONFIG_SF_DEFAULT_MODE
#define CONFIG_ENV_SPI_MAX_HZ		CONFIG_SF_DEFAULT_SPEED
#endif

#endif			       /* __CONFIG_CGTQMX6EVAL_H */
Commit	Line	Data
9b75bad0 SL	1	/*
	2	*
	3	* Congatec Conga-QEVAl board configuration file.
	4	*
	5	* Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
	6	* Based on Freescale i.MX6Q Sabre Lite board configuration file.
	7	* Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com>
	8	* Leo Sartre, <lsartre@adeneo-embedded.com>
	9	*
1a459660	10	* SPDX-License-Identifier: GPL-2.0+
9b75bad0 SL	11	*/
	12
	13	#ifndef __CONFIG_CGTQMX6EVAL_H
	14	#define __CONFIG_CGTQMX6EVAL_H
	15
9b75bad0 SL	16	#include "mx6_common.h"
9b75bad0 SL	17
9b75bad0 SL	18	#define CONFIG_MACH_TYPE 4122
9b75bad0 SL	19
d7140351 OS	20	#ifdef CONFIG_SPL
	21	#define CONFIG_SPL_LIBCOMMON_SUPPORT
	22	#define CONFIG_SPL_MMC_SUPPORT
	23	#define CONFIG_SPL_SPI_SUPPORT
	24	#define CONFIG_SPL_SPI_FLASH_SUPPORT
	25	#define CONFIG_SYS_SPI_U_BOOT_OFFS (64 * 1024)
	26	#define CONFIG_SPL_SPI_LOAD
	27	#include "imx6_spl.h"
	28	#endif
	29
9b75bad0 SL	30	/* Size of malloc() pool */
	31	#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
	32
	33	#define CONFIG_BOARD_EARLY_INIT_F
d7140351	34	#define CONFIG_BOARD_LATE_INIT
9b75bad0	35	#define CONFIG_MISC_INIT_R
9b75bad0 SL	36
	37	#define CONFIG_MXC_UART
	38	#define CONFIG_MXC_UART_BASE UART2_BASE
	39
	40	/* MMC Configs */
9b75bad0 SL	41	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
9b75bad0 SL	42
71bcdafe OS	43	/* SPI NOR */
	44	#define CONFIG_CMD_SF
	45	#define CONFIG_SPI_FLASH
	46	#define CONFIG_SPI_FLASH_STMICRO
	47	#define CONFIG_SPI_FLASH_SST
	48	#define CONFIG_MXC_SPI
	49	#define CONFIG_SF_DEFAULT_BUS 0
	50	#define CONFIG_SF_DEFAULT_SPEED 20000000
	51	#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
	52
9b75bad0 SL	53	/* Miscellaneous commands */
	54	#define CONFIG_CMD_BMODE
	55
862187b7	56	/* Thermal support */
1368f993	57	#define CONFIG_IMX_THERMAL
862187b7	58
4c9929d6 OS	59	/* I2C Configs */
	60	#define CONFIG_CMD_I2C
	61	#define CONFIG_SYS_I2C
	62	#define CONFIG_SYS_I2C_MXC
03544c66 AA	63	#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
03544c66 AA	64	#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
4c9929d6 OS	65	#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
	66	#define CONFIG_SYS_I2C_SPEED 100000
	67
	68	/* PMIC */
	69	#define CONFIG_POWER
	70	#define CONFIG_POWER_I2C
	71	#define CONFIG_POWER_PFUZE100
	72	#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
	73
95246ac7 OS	74	/* USB Configs */
	75	#define CONFIG_CMD_USB
	76	#define CONFIG_CMD_FAT
	77	#define CONFIG_USB_EHCI
	78	#define CONFIG_USB_EHCI_MX6
	79	#define CONFIG_USB_STORAGE
	80	#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
	81	#define CONFIG_USB_HOST_ETHER
	82	#define CONFIG_USB_ETHER_ASIX
	83	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
	84	#define CONFIG_MXC_USB_FLAGS 0
	85	#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 /* Enabled USB controller number */
	86	#define CONFIG_USB_KEYBOARD
	87	#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
	88
3e08e1b7	89	#define CONFIG_USBD_HS
3e08e1b7	90
3e08e1b7 OS	91	#define CONFIG_CMD_USB_MASS_STORAGE
	92	#define CONFIG_USB_FUNCTION_MASS_STORAGE
	93	#define CONFIG_USB_GADGET_DOWNLOAD
3e08e1b7 OS	94
	95	#define CONFIG_G_DNL_VENDOR_NUM 0x0525
	96	#define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5
	97	#define CONFIG_G_DNL_MANUFACTURER "Congatec"
	98
e0a352d1 OS	99	/* USB Device Firmware Update support */
	100	#define CONFIG_CMD_DFU
	101	#define CONFIG_USB_FUNCTION_DFU
	102	#define CONFIG_DFU_MMC
	103	#define CONFIG_DFU_SF
	104
eb76f13a OS	105	#define CONFIG_USB_FUNCTION_FASTBOOT
	106	#define CONFIG_CMD_FASTBOOT
	107	#define CONFIG_ANDROID_BOOT_IMAGE
	108	#define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR
	109	#define CONFIG_FASTBOOT_BUF_SIZE 0x07000000
	110
6d551f27 OS	111	/* Framebuffer */
	112	#define CONFIG_VIDEO
	113	#define CONFIG_VIDEO_IPUV3
	114	#define CONFIG_CFB_CONSOLE
	115	#define CONFIG_VGA_AS_SINGLE_DEVICE
	116	#define CONFIG_SYS_CONSOLE_IS_IN_ENV
	117	#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
	118	#define CONFIG_VIDEO_BMP_RLE8
	119	#define CONFIG_SPLASH_SCREEN
	120	#define CONFIG_SPLASH_SCREEN_ALIGN
	121	#define CONFIG_BMP_16BPP
	122	#define CONFIG_VIDEO_LOGO
	123	#define CONFIG_VIDEO_BMP_LOGO
	124	#ifdef CONFIG_MX6DL
	125	#define CONFIG_IPUV3_CLK 198000000
	126	#else
	127	#define CONFIG_IPUV3_CLK 264000000
	128	#endif
	129	#define CONFIG_IMX_HDMI
	130
6731bc8d OS	131	/* SATA */
	132	#define CONFIG_CMD_SATA
	133	#define CONFIG_DWC_AHSATA
	134	#define CONFIG_SYS_SATA_MAX_DEVICE 1
	135	#define CONFIG_DWC_AHSATA_PORT_ID 0
	136	#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
	137	#define CONFIG_LBA48
	138	#define CONFIG_LIBATA
	139
f0222902 OS	140	/* Ethernet */
	141	#define CONFIG_CMD_PING
	142	#define CONFIG_CMD_DHCP
	143	#define CONFIG_CMD_MII
	144	#define CONFIG_FEC_MXC
	145	#define CONFIG_MII
	146	#define IMX_FEC_BASE ENET_BASE_ADDR
	147	#define CONFIG_FEC_XCV_TYPE RGMII
	148	#define CONFIG_ETHPRIME "FEC"
	149	#define CONFIG_FEC_MXC_PHYADDR 6
	150	#define CONFIG_PHYLIB
	151	#define CONFIG_PHY_ATHEROS
	152
5b94ce2c OS	153	/* Command definition */
	154
	155	#define CONFIG_MXC_UART_BASE UART2_BASE
	156	#define CONFIG_CONSOLE_DEV "ttymxc1"
	157	#define CONFIG_MMCROOT "/dev/mmcblk0p2"
	158	#define CONFIG_SYS_MMC_ENV_DEV 0
9b75bad0	159
d7140351	160	#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
9b75bad0 SL	161	#define CONFIG_EXTRA_ENV_SETTINGS \
9b75bad0 SL	162	"script=boot.scr\0" \
4ac0c2bf	163	"image=zImage\0" \
d7140351	164	"fdtfile=undefined\0" \
5b94ce2c	165	"fdt_addr_r=0x18000000\0" \
9b75bad0	166	"boot_fdt=try\0" \
5b94ce2c OS	167	"ip_dyn=yes\0" \
5b94ce2c OS	168	"console=" CONFIG_CONSOLE_DEV "\0" \
e0a352d1 OS	169	"dfuspi=dfu 0 sf 0:0:10000000:0\0" \
	170	"dfu_alt_info_spl=spl raw 0x400\0" \
	171	"dfu_alt_info_img=u-boot raw 0x10000\0" \
	172	"dfu_alt_info=spl raw 0x400\0" \
5b94ce2c OS	173	"bootm_size=0x10000000\0" \
5b94ce2c OS	174	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
9b75bad0	175	"mmcpart=1\0" \
5b94ce2c OS	176	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
	177	"update_sd_firmware=" \
	178	"if test ${ip_dyn} = yes; then " \
	179	"setenv get_cmd dhcp; " \
	180	"else " \
	181	"setenv get_cmd tftp; " \
	182	"fi; " \
	183	"if mmc dev ${mmcdev}; then " \
	184	"if ${get_cmd} ${update_sd_firmware_filename}; then " \
	185	"setexpr fw_sz ${filesize} / 0x200; " \
	186	"setexpr fw_sz ${fw_sz} + 1; " \
	187	"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
	188	"fi; " \
	189	"fi\0" \
9b75bad0 SL	190	"mmcargs=setenv bootargs console=${console},${baudrate} " \
	191	"root=${mmcroot}\0" \
	192	"loadbootscript=" \
5b94ce2c	193	"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
9b75bad0 SL	194	"bootscript=echo Running bootscript from mmc ...; " \
9b75bad0 SL	195	"source\0" \
5b94ce2c OS	196	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
5b94ce2c OS	197	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} ${fdtfile}\0" \
9b75bad0 SL	198	"mmcboot=echo Booting from mmc ...; " \
	199	"run mmcargs; " \
	200	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	201	"if run loadfdt; then " \
5b94ce2c OS	202	"bootz ${loadaddr} - ${fdt_addr_r}; " \
	203	"else " \
	204	"if test ${boot_fdt} = try; then " \
	205	"bootz; " \
	206	"else " \
	207	"echo WARN: Cannot load the DT; " \
	208	"fi; " \
	209	"fi; " \
	210	"else " \
	211	"bootz; " \
	212	"fi;\0" \
d7140351 OS	213	"findfdt="\
	214	"if test $board_rev = MX6Q ; then " \
	215	"setenv fdtfile imx6q-qmx6.dtb; fi; " \
	216	"if test $board_rev = MX6DL ; then " \
	217	"setenv fdtfile imx6dl-qmx6.dtb; fi; " \
	218	"if test $fdtfile = undefined; then " \
	219	"echo WARNING: Could not determine dtb to use; fi; \0" \
5b94ce2c OS	220	"netargs=setenv bootargs console=${console},${baudrate} " \
	221	"root=/dev/nfs " \
	222	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
	223	"netboot=echo Booting from net ...; " \
	224	"run netargs; " \
	225	"if test ${ip_dyn} = yes; then " \
	226	"setenv get_cmd dhcp; " \
	227	"else " \
	228	"setenv get_cmd tftp; " \
	229	"fi; " \
	230	"${get_cmd} ${image}; " \
	231	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	232	"if ${get_cmd} ${fdt_addr_r} ${fdtfile}; then " \
	233	"bootz ${loadaddr} - ${fdt_addr_r}; " \
9b75bad0 SL	234	"else " \
9b75bad0 SL	235	"if test ${boot_fdt} = try; then " \
4ac0c2bf	236	"bootz; " \
9b75bad0 SL	237	"else " \
	238	"echo WARN: Cannot load the DT; " \
	239	"fi; " \
	240	"fi; " \
	241	"else " \
4ac0c2bf	242	"bootz; " \
5b94ce2c	243	"fi;\0" \
71bcdafe	244	"spilock=sf probe && sf protect lock 0x3f0000 0x10000;"\
9b75bad0 SL	245
9b75bad0 SL	246	#define CONFIG_BOOTCOMMAND \
71bcdafe	247	"run spilock;" \
d7140351	248	"run findfdt; " \
5b94ce2c OS	249	"mmc dev ${mmcdev};" \
	250	"if mmc rescan; then " \
	251	"if run loadbootscript; then " \
	252	"run bootscript; " \
	253	"else " \
	254	"if run loadimage; then " \
	255	"run mmcboot; " \
	256	"else run netboot; " \
	257	"fi; " \
	258	"fi; " \
	259	"else run netboot; fi"
9b75bad0	260
9b75bad0 SL	261	#define CONFIG_SYS_MEMTEST_START 0x10000000
	262	#define CONFIG_SYS_MEMTEST_END 0x10010000
	263	#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
	264
9b75bad0 SL	265	/* Physical Memory Map */
	266	#define CONFIG_NR_DRAM_BANKS 1
	267	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
	268	#define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024)
	269
	270	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	271	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	272	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	273
	274	#define CONFIG_SYS_INIT_SP_OFFSET \
	275	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	276	#define CONFIG_SYS_INIT_SP_ADDR \
	277	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	278
056845c2	279	/* Environment organization */
d5de9108	280	#if defined (CONFIG_ENV_IS_IN_MMC)
9b75bad0 SL	281	#define CONFIG_ENV_OFFSET (6 * 64 * 1024)
9b75bad0 SL	282	#define CONFIG_SYS_MMC_ENV_DEV 0
d5de9108 OS	283	#endif
	284
	285	#define CONFIG_ENV_SIZE (8 * 1024)
	286
	287	#define CONFIG_ENV_IS_IN_SPI_FLASH
	288	#if defined(CONFIG_ENV_IS_IN_SPI_FLASH)
	289	#define CONFIG_ENV_OFFSET (768 * 1024)
	290	#define CONFIG_ENV_SECT_SIZE (64 * 1024)
	291	#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
	292	#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
	293	#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
	294	#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
	295	#endif
9b75bad0	296
9b75bad0	297	#endif /* __CONFIG_CGTQMX6EVAL_H */